1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the main Bluetooth Manager (BTM) internal 22 * definitions. 23 * 24 ******************************************************************************/ 25 #ifndef BTM_INT_H 26 #define BTM_INT_H 27 28 #include "bt_target.h" 29 #include "gki.h" 30 #include "hcidefs.h" 31 32 #if RFCOMM_INCLUDED == TRUE 33 #include "rfcdefs.h" 34 #endif 35 36 #include "btm_api.h" 37 38 #if (BLE_INCLUDED == TRUE) 39 #include "btm_ble_int.h" 40 #if (SMP_INCLUDED == TRUE) 41 #include "smp_api.h" 42 #endif 43 #endif 44 45 #if BTM_MAX_LOC_BD_NAME_LEN > 0 46 typedef char tBTM_LOC_BD_NAME[BTM_MAX_LOC_BD_NAME_LEN + 1]; 47 #endif 48 49 #define BTM_ACL_IS_CONNECTED(bda) (btm_bda_to_acl (bda) != NULL) 50 51 /* Definitions for Server Channel Number (SCN) management 52 */ 53 #define BTM_MAX_SCN PORT_MAX_RFC_PORTS 54 55 /* Definition for number of the remote device role saved 56 */ 57 #define BTM_ROLE_DEVICE_NUM 4 58 59 /* Define masks for supported and exception 2.0 ACL packet types 60 */ 61 #define BTM_ACL_SUPPORTED_PKTS_MASK (HCI_PKT_TYPES_MASK_DM1 | \ 62 HCI_PKT_TYPES_MASK_DH1 | \ 63 HCI_PKT_TYPES_MASK_DM3 | \ 64 HCI_PKT_TYPES_MASK_DH3 | \ 65 HCI_PKT_TYPES_MASK_DM5 | \ 66 HCI_PKT_TYPES_MASK_DH5) 67 68 #define BTM_ACL_EXCEPTION_PKTS_MASK (HCI_PKT_TYPES_MASK_NO_2_DH1 | \ 69 HCI_PKT_TYPES_MASK_NO_3_DH1 | \ 70 HCI_PKT_TYPES_MASK_NO_2_DH3 | \ 71 HCI_PKT_TYPES_MASK_NO_3_DH3 | \ 72 HCI_PKT_TYPES_MASK_NO_2_DH5 | \ 73 HCI_PKT_TYPES_MASK_NO_3_DH5) 74 75 #define BTM_EPR_AVAILABLE(p) ((HCI_ATOMIC_ENCRYPT_SUPPORTED((p)->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]) && \ 76 HCI_ATOMIC_ENCRYPT_SUPPORTED(btm_cb.devcb.local_lmp_features[HCI_EXT_FEATURES_PAGE_0])) \ 77 ? TRUE : FALSE) 78 79 #define BTM_IS_BRCM_CONTROLLER() (btm_cb.devcb.local_version.manufacturer == LMP_COMPID_BROADCOM) 80 81 /* Define the ACL Management control structure 82 */ 83 typedef struct 84 { 85 UINT16 hci_handle; 86 UINT16 pkt_types_mask; 87 UINT16 restore_pkt_types; /* when coming in/out of SCO connection restore the packet types */ 88 UINT16 clock_offset; 89 BD_ADDR remote_addr; 90 DEV_CLASS remote_dc; 91 BD_NAME remote_name; 92 93 UINT16 manufacturer; 94 UINT16 lmp_subversion; 95 UINT16 link_super_tout; 96 BD_FEATURES peer_lmp_features[HCI_EXT_FEATURES_PAGE_MAX + 1]; /* Peer LMP Extended features mask table for the device */ 97 UINT8 num_read_pages; 98 UINT8 lmp_version; 99 100 BOOLEAN in_use; 101 UINT8 link_role; 102 BOOLEAN link_up_issued; /* True if busy_level link up has been issued */ 103 104 #define BTM_ACL_SWKEY_STATE_IDLE 0 105 #define BTM_ACL_SWKEY_STATE_MODE_CHANGE 1 106 #define BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF 2 107 #define BTM_ACL_SWKEY_STATE_SWITCHING 3 108 #define BTM_ACL_SWKEY_STATE_ENCRYPTION_ON 4 109 #define BTM_ACL_SWKEY_STATE_IN_PROGRESS 5 110 UINT8 switch_role_state; 111 UINT8 change_key_state; 112 113 #define BTM_ACL_ENCRYPT_STATE_IDLE 0 114 #define BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF 1 /* encryption turning off */ 115 #define BTM_ACL_ENCRYPT_STATE_TEMP_FUNC 2 /* temporarily off for change link key or role switch */ 116 #define BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON 3 /* encryption turning on */ 117 UINT8 encrypt_state; /* overall BTM encryption state */ 118 119 #if BTM_PWR_MGR_INCLUDED == FALSE 120 UINT8 mode; 121 #endif /* BTM_PWR_MGR_INCLUDED */ 122 #if BLE_INCLUDED == TRUE 123 UINT8 is_le_link; 124 BD_ADDR conn_addr; /* local device address used for this connection */ 125 UINT8 conn_addr_type; /* local device address type for this connection */ 126 BD_ADDR active_remote_addr; /* remote address used on this connection */ 127 UINT8 active_remote_addr_type; /* local device address type for this connection */ 128 BD_FEATURES peer_le_features; /* Peer LE Used features mask for the device */ 129 130 #endif 131 132 } tACL_CONN; 133 134 /***************************************************** 135 ** TIMER Definitions 136 ******************************************************/ 137 #define TT_DEV_RESET 1 138 #define TT_DEV_RLN 2 139 #define TT_DEV_RLNKP 4 /* Read Link Policy Settings */ 140 141 /* Define the Device Management control structure 142 */ 143 typedef struct 144 { 145 tBTM_DEV_STATUS_CB *p_dev_status_cb; /* Device status change callback */ 146 tBTM_VS_EVT_CB *p_vend_spec_cb[BTM_MAX_VSE_CALLBACKS]; /* Register for vendor specific events */ 147 148 tBTM_CMPL_CB *p_stored_link_key_cmpl_cb; /* Read/Write/Delete stored link key */ 149 150 TIMER_LIST_ENT reset_timer; 151 tBTM_CMPL_CB *p_reset_cmpl_cb; /* Callback function to be called */ 152 /* when startup of the device is done */ 153 TIMER_LIST_ENT rln_timer; 154 tBTM_CMPL_CB *p_rln_cmpl_cb; /* Callback function to be called when */ 155 /* read local name function complete */ 156 TIMER_LIST_ENT rlinkp_timer; 157 tBTM_CMPL_CB *p_rlinkp_cmpl_cb; /* Callback function to be called when */ 158 /* read link policy function completes */ 159 TIMER_LIST_ENT rssi_timer; 160 tBTM_CMPL_CB *p_rssi_cmpl_cb; /* Callback function to be called when */ 161 /* read rssi function completes */ 162 TIMER_LIST_ENT lnk_quality_timer; 163 tBTM_CMPL_CB *p_lnk_qual_cmpl_cb;/* Callback function to be called when */ 164 /* read link quality function completes */ 165 TIMER_LIST_ENT txpwer_timer; 166 tBTM_CMPL_CB *p_txpwer_cmpl_cb; /* Callback function to be called when */ 167 /* read inq tx power function completes */ 168 169 TIMER_LIST_ENT qossu_timer; 170 tBTM_CMPL_CB *p_qossu_cmpl_cb; /* Callback function to be called when */ 171 /* qos setup function completes */ 172 173 tBTM_ROLE_SWITCH_CMPL switch_role_ref_data; 174 tBTM_CMPL_CB *p_switch_role_cb; /* Callback function to be called when */ 175 /* requested switch role is completed */ 176 177 tBTM_CHANGE_KEY_CMPL chg_link_key_ref_data; 178 tBTM_CMPL_CB *p_chg_link_key_cb; /* Callback function to be called when */ 179 /* change of link key is completed */ 180 181 TIMER_LIST_ENT tx_power_timer; 182 tBTM_CMPL_CB *p_tx_power_cmpl_cb;/* Callback function to be called */ 183 184 BD_ADDR local_addr; /* BD_ADDR of the local device */ 185 tBTM_VERSION_INFO local_version; /* Local Version Information */ 186 DEV_CLASS dev_class; /* Local device class */ 187 188 /* Local LMP Extended features mask table for the device */ 189 BD_FEATURES local_lmp_features[HCI_EXT_FEATURES_PAGE_MAX + 1]; 190 191 #if BLE_INCLUDED == TRUE 192 BD_ADDR read_tx_pwr_addr; /* read TX power target address */ 193 BD_FEATURES local_le_features; /* Local LE Supported features mask for the device */ 194 195 tBTM_BLE_LOCAL_ID_KEYS id_keys; /* local BLE ID keys */ 196 BT_OCTET16 er; /* BLE encryption key */ 197 198 #if BTM_BLE_CONFORMANCE_TESTING == TRUE 199 BOOLEAN no_disc_if_pair_fail; 200 BOOLEAN enable_test_mac_val; 201 BT_OCTET8 test_mac; 202 BOOLEAN enable_test_local_sign_cntr; 203 UINT32 test_local_sign_cntr; 204 #endif 205 206 #if BLE_INCLUDED == TRUE 207 tBTM_CMPL_CB *p_le_test_cmd_cmpl_cb; /* Callback function to be called when 208 LE test mode command has been sent successfully */ 209 #endif 210 211 #endif /* BLE_INCLUDED */ 212 213 #define BTM_DEV_STATE_WAIT_RESET_CMPLT 0 214 #define BTM_DEV_STATE_WAIT_AFTER_RESET 1 215 #define BTM_DEV_STATE_READY 2 216 217 UINT8 state; 218 tBTM_IO_CAP loc_io_caps; /* IO capability of the local device */ 219 BOOLEAN loc_auth_req; /* the auth_req flag */ 220 BD_FEATURES brcm_features; /* Broadcom specific features bit mask */ 221 222 #define BTM_RE_READ_1ST_PAGE 0x01 /* Set it if you set at least one of "..._HOST_MAY_SUPP_..." bits */ 223 #define BTM_HOST_MAY_SUPP_SSP 0x02 224 #define BTM_HOST_MAY_SUPP_LE 0x04 225 #define BTM_HOST_MAY_SUPP_SIMULT_BR_LE 0x08 226 UINT8 lmp_features_host_may_support; /* The flags of LMP features host may support via BR/EDR ctrlr + BTM_RE_READ_1ST_PAGE */ 227 UINT8 supported_cmds[HCI_NUM_SUPP_COMMANDS_BYTES]; /* Supported Commands bit field */ 228 229 } tBTM_DEVCB; 230 231 232 /* Define the structures and constants used for inquiry 233 */ 234 235 /* Definitions of limits for inquiries */ 236 #define BTM_PER_INQ_MIN_MAX_PERIOD HCI_PER_INQ_MIN_MAX_PERIOD 237 #define BTM_PER_INQ_MAX_MAX_PERIOD HCI_PER_INQ_MAX_MAX_PERIOD 238 #define BTM_PER_INQ_MIN_MIN_PERIOD HCI_PER_INQ_MIN_MIN_PERIOD 239 #define BTM_PER_INQ_MAX_MIN_PERIOD HCI_PER_INQ_MAX_MIN_PERIOD 240 #define BTM_MAX_INQUIRY_LENGTH HCI_MAX_INQUIRY_LENGTH 241 #define BTM_MIN_INQUIRY_LEN 0x01 242 243 #define BTM_MIN_INQ_TX_POWER -70 244 #define BTM_MAX_INQ_TX_POWER 20 245 246 #if BTM_USE_INQ_RESULTS_FILTER == TRUE 247 typedef struct 248 { 249 UINT32 inq_count; /* Used for determining if a response has already been */ 250 /* received for the current inquiry operation. (We do not */ 251 /* want to flood the caller with multiple responses from */ 252 /* the same device. */ 253 BD_ADDR bd_addr; 254 } tINQ_BDADDR; 255 #endif 256 257 typedef struct 258 { 259 UINT32 time_of_resp; 260 UINT32 inq_count; /* "timestamps" the entry with a particular inquiry count */ 261 /* Used for determining if a response has already been */ 262 /* received for the current inquiry operation. (We do not */ 263 /* want to flood the caller with multiple responses from */ 264 /* the same device. */ 265 tBTM_INQ_INFO inq_info; 266 BOOLEAN in_use; 267 268 #if (BLE_INCLUDED == TRUE) 269 BOOLEAN scan_rsp; 270 #endif 271 } tINQ_DB_ENT; 272 273 274 enum 275 { 276 INQ_NONE, 277 INQ_LE_OBSERVE, 278 INQ_GENERAL 279 }; 280 typedef UINT8 tBTM_INQ_TYPE; 281 282 typedef struct 283 { 284 tBTM_CMPL_CB *p_remname_cmpl_cb; 285 286 #define BTM_EXT_RMT_NAME_TIMEOUT 40 287 288 289 TIMER_LIST_ENT rmt_name_timer_ent; 290 291 UINT16 discoverable_mode; 292 UINT16 connectable_mode; 293 UINT16 page_scan_window; 294 UINT16 page_scan_period; 295 UINT16 inq_scan_window; 296 UINT16 inq_scan_period; 297 UINT16 inq_scan_type; 298 UINT16 page_scan_type; /* current page scan type */ 299 tBTM_INQ_TYPE scan_type; 300 301 BD_ADDR remname_bda; /* Name of bd addr for active remote name request */ 302 #define BTM_RMT_NAME_INACTIVE 0 303 #define BTM_RMT_NAME_EXT 0x1 /* Initiated through API */ 304 #define BTM_RMT_NAME_SEC 0x2 /* Initiated internally by security manager */ 305 #define BTM_RMT_NAME_INQ 0x4 /* Remote name initiated internally by inquiry */ 306 BOOLEAN remname_active; /* State of a remote name request by external API */ 307 308 tBTM_CMPL_CB *p_inq_cmpl_cb; 309 tBTM_INQ_RESULTS_CB *p_inq_results_cb; 310 tBTM_CMPL_CB *p_inq_ble_cmpl_cb; /*completion callback exclusively for LE Observe*/ 311 tBTM_INQ_RESULTS_CB *p_inq_ble_results_cb;/*results callback exclusively for LE observe*/ 312 tBTM_CMPL_CB *p_inqfilter_cmpl_cb; /* Called (if not NULL) after inquiry filter completed */ 313 tBTM_INQ_DB_CHANGE_CB *p_inq_change_cb; /* Inquiry database changed callback */ 314 UINT32 inq_counter; /* Counter incremented each time an inquiry completes */ 315 /* Used for determining whether or not duplicate devices */ 316 /* have responded to the same inquiry */ 317 TIMER_LIST_ENT inq_timer_ent; 318 #if BTM_USE_INQ_RESULTS_FILTER == TRUE 319 tINQ_BDADDR *p_bd_db; /* Pointer to memory that holds bdaddrs */ 320 UINT16 num_bd_entries; /* Number of entries in database */ 321 UINT16 max_bd_entries; /* Maximum number of entries that can be stored */ 322 #endif 323 tINQ_DB_ENT inq_db[BTM_INQ_DB_SIZE]; 324 tBTM_INQ_PARMS inqparms; /* Contains the parameters for the current inquiry */ 325 tBTM_INQUIRY_CMPL inq_cmpl_info; /* Status and number of responses from the last inquiry */ 326 327 UINT16 per_min_delay; /* Current periodic minimum delay */ 328 UINT16 per_max_delay; /* Current periodic maximum delay */ 329 BOOLEAN inqfilt_active; 330 UINT8 pending_filt_complete_event; /* to take care of btm_event_filter_complete corresponding to */ 331 /* inquiry that has been cancelled*/ 332 UINT8 inqfilt_type; /* Contains the inquiry filter type (BD ADDR, COD, or Clear) */ 333 334 #define BTM_INQ_INACTIVE_STATE 0 335 #define BTM_INQ_CLR_FILT_STATE 1 /* Currently clearing the inquiry filter preceeding the inquiry request */ 336 /* (bypassed if filtering is not used) */ 337 #define BTM_INQ_SET_FILT_STATE 2 /* Sets the new filter (or turns off filtering) in this state */ 338 #define BTM_INQ_ACTIVE_STATE 3 /* Actual inquiry or periodic inquiry is in progress */ 339 #define BTM_INQ_REMNAME_STATE 4 /* Remote name requests are active */ 340 341 UINT8 state; /* Current state that the inquiry process is in */ 342 UINT8 inq_active; /* Bit Mask indicating type of inquiry is active */ 343 BOOLEAN no_inc_ssp; /* TRUE, to stop inquiry on incoming SSP */ 344 #if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 345 btm_inq_state next_state; /*interleaving state to determine next mode to be inquired*/ 346 #endif 347 } tBTM_INQUIRY_VAR_ST; 348 349 /* The MSB of the clock offset field indicates that the offset is valid if TRUE */ 350 #define BTM_CLOCK_OFFSET_VALID 0x8000 351 352 /* Define the structures needed by security management 353 */ 354 355 #define BTM_SEC_INVALID_HANDLE 0xFFFF 356 357 typedef UINT8 *BTM_BD_NAME_PTR; /* Pointer to Device name */ 358 359 /* Security callback is called by this unit when security 360 ** procedures are completed. Parameters are 361 ** BD Address of remote 362 ** Result of the operation 363 */ 364 typedef tBTM_SEC_CBACK tBTM_SEC_CALLBACK; 365 366 typedef void (tBTM_SCO_IND_CBACK) (UINT16 sco_inx) ; 367 368 /* MACROs to convert from SCO packet types mask to ESCO and back */ 369 #define BTM_SCO_PKT_TYPE_MASK ( HCI_PKT_TYPES_MASK_HV1 \ 370 | HCI_PKT_TYPES_MASK_HV2 \ 371 | HCI_PKT_TYPES_MASK_HV3) 372 373 /* Mask defining only the SCO types of an esco packet type */ 374 #define BTM_ESCO_PKT_TYPE_MASK ( HCI_ESCO_PKT_TYPES_MASK_HV1 \ 375 | HCI_ESCO_PKT_TYPES_MASK_HV2 \ 376 | HCI_ESCO_PKT_TYPES_MASK_HV3) 377 378 #define BTM_SCO_2_ESCO(scotype) ((UINT16)(((scotype) & BTM_SCO_PKT_TYPE_MASK) >> 5)) 379 #define BTM_ESCO_2_SCO(escotype) ((UINT16)(((escotype) & BTM_ESCO_PKT_TYPE_MASK) << 5)) 380 381 /* Define masks for supported and exception 2.0 SCO packet types 382 */ 383 #define BTM_SCO_SUPPORTED_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_HV1 | \ 384 HCI_ESCO_PKT_TYPES_MASK_HV2 | \ 385 HCI_ESCO_PKT_TYPES_MASK_HV3 | \ 386 HCI_ESCO_PKT_TYPES_MASK_EV3 | \ 387 HCI_ESCO_PKT_TYPES_MASK_EV4 | \ 388 HCI_ESCO_PKT_TYPES_MASK_EV5) 389 390 #define BTM_SCO_EXCEPTION_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 | \ 391 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 | \ 392 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 | \ 393 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5) 394 395 396 #define BTM_SCO_ROUTE_UNKNOWN 0xff 397 398 /* Define the structure that contains (e)SCO data */ 399 typedef struct 400 { 401 tBTM_ESCO_CBACK *p_esco_cback; /* Callback for eSCO events */ 402 tBTM_ESCO_PARAMS setup; 403 tBTM_ESCO_DATA data; /* Connection complete information */ 404 UINT8 hci_status; 405 } tBTM_ESCO_INFO; 406 407 /* Define the structure used for SCO Management 408 */ 409 typedef struct 410 { 411 tBTM_ESCO_INFO esco; /* Current settings */ 412 #if BTM_SCO_HCI_INCLUDED == TRUE 413 BUFFER_Q xmit_data_q; /* SCO data transmitting queue */ 414 #endif 415 tBTM_SCO_CB *p_conn_cb; /* Callback for when connected */ 416 tBTM_SCO_CB *p_disc_cb; /* Callback for when disconnect */ 417 UINT16 state; /* The state of the SCO link */ 418 UINT16 hci_handle; /* HCI Handle */ 419 BOOLEAN is_orig; /* TRUE if the originator */ 420 BOOLEAN rem_bd_known; /* TRUE if remote BD addr known */ 421 422 } tSCO_CONN; 423 424 /* SCO Management control block */ 425 typedef struct 426 { 427 tBTM_SCO_IND_CBACK *app_sco_ind_cb; 428 #if BTM_SCO_HCI_INCLUDED == TRUE 429 tBTM_SCO_DATA_CB *p_data_cb; /* Callback for SCO data over HCI */ 430 UINT32 xmit_window_size; /* Total SCO window in bytes */ 431 #endif 432 tSCO_CONN sco_db[BTM_MAX_SCO_LINKS]; 433 tBTM_ESCO_PARAMS def_esco_parms; 434 BD_ADDR xfer_addr; 435 UINT16 sco_disc_reason; 436 BOOLEAN esco_supported; /* TRUE if 1.2 cntlr AND supports eSCO links */ 437 tBTM_SCO_TYPE desired_sco_mode; 438 tBTM_SCO_TYPE xfer_sco_type; 439 tBTM_SCO_PCM_PARAM sco_pcm_param; 440 tBTM_SCO_CODEC_TYPE codec_in_use; /* None, CVSD, MSBC, etc. */ 441 #if BTM_SCO_HCI_INCLUDED == TRUE 442 tBTM_SCO_ROUTE_TYPE sco_path; 443 #endif 444 445 } tSCO_CB; 446 447 448 #if BTM_SCO_INCLUDED == TRUE 449 extern void btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb ); 450 extern void btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup, 451 tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb); 452 extern void btm_reject_sco_link(UINT16 sco_inx ); 453 extern void btm_sco_chk_pend_rolechange (UINT16 hci_handle); 454 #else 455 #define btm_accept_sco_link(sco_inx, p_setup, p_conn_cb, p_disc_cb) 456 #define btm_reject_sco_link(sco_inx) 457 #define btm_set_sco_ind_cback(sco_ind_cb) 458 #define btm_sco_chk_pend_rolechange(hci_handle) 459 #endif /* BTM_SCO_INCLUDED */ 460 461 /* 462 ** Define structure for Security Service Record. 463 ** A record exists for each service registered with the Security Manager 464 */ 465 typedef struct 466 { 467 UINT32 mx_proto_id; /* Service runs over this multiplexer protocol */ 468 UINT32 orig_mx_chan_id; /* Channel on the multiplexer protocol */ 469 UINT32 term_mx_chan_id; /* Channel on the multiplexer protocol */ 470 UINT16 psm; /* L2CAP PSM value */ 471 UINT16 security_flags; /* Bitmap of required security features */ 472 UINT8 service_id; /* Passed in authorization callback */ 473 #if (L2CAP_UCD_INCLUDED == TRUE) 474 UINT16 ucd_security_flags; /* Bitmap of required security features for UCD */ 475 #endif 476 #if BTM_SEC_SERVICE_NAME_LEN > 0 477 UINT8 orig_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 478 UINT8 term_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 479 #endif 480 } tBTM_SEC_SERV_REC; 481 482 #if BLE_INCLUDED == TRUE 483 /* LE Security information of device in Slave Role */ 484 typedef struct 485 { 486 BT_OCTET16 irk; /* peer diverified identity root */ 487 BT_OCTET16 ltk; /* peer long term key */ 488 BT_OCTET16 csrk; /* peer SRK peer device used to secured sign local data */ 489 490 BT_OCTET8 rand; /* random vector for LTK generation */ 491 UINT16 ediv; /* LTK diversifier of this slave device */ 492 UINT16 div; /* local DIV to generate local LTK=d1(ER,DIV,0) and CSRK=d1(ER,DIV,1) */ 493 UINT8 sec_level; /* local pairing security level */ 494 UINT8 key_size; /* key size of the LTK delivered to peer device */ 495 UINT8 srk_sec_level; /* security property of peer SRK for this device */ 496 UINT8 local_csrk_sec_level; /* security property of local CSRK for this device */ 497 498 UINT32 counter; /* peer sign counter for verifying rcv signed cmd */ 499 UINT32 local_counter; /* local sign counter for sending signed write cmd*/ 500 }tBTM_SEC_BLE_KEYS; 501 502 #endif /* BLE_INCLUDED */ 503 504 typedef struct 505 { 506 tBLE_ADDR_TYPE ble_addr_type; /* LE device type: public or random address */ 507 tBLE_ADDR_TYPE static_addr_type; /* static address type */ 508 BD_ADDR static_addr; /* static address */ 509 510 #if SMP_INCLUDED == TRUE 511 tBTM_LE_KEY_TYPE key_type; /* bit mask of valid key types in record */ 512 tBTM_SEC_BLE_KEYS keys; /* LE device security info in slave rode */ 513 #endif 514 } tBTM_SEC_BLE; 515 516 /* 517 ** Define structure for Security Device Record. 518 ** A record exists for each device authenticated with this device 519 */ 520 typedef struct 521 { 522 tBTM_SEC_SERV_REC *p_cur_service; 523 tBTM_SEC_CALLBACK *p_callback; 524 void *p_ref_data; 525 UINT32 timestamp; /* Timestamp of the last connection */ 526 UINT32 trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE]; /* Bitwise OR of trusted services */ 527 UINT16 hci_handle; /* Handle to connection when exists */ 528 UINT16 clock_offset; /* Latest known clock offset */ 529 BD_ADDR bd_addr; /* BD_ADDR of the device */ 530 DEV_CLASS dev_class; /* DEV_CLASS of the device */ 531 LINK_KEY link_key; /* Device link key */ 532 533 #define BTM_SEC_AUTHORIZED BTM_SEC_FLAG_AUTHORIZED /* 0x01 */ 534 #define BTM_SEC_AUTHENTICATED BTM_SEC_FLAG_AUTHENTICATED /* 0x02 */ 535 #define BTM_SEC_ENCRYPTED BTM_SEC_FLAG_ENCRYPTED /* 0x04 */ 536 #define BTM_SEC_NAME_KNOWN 0x08 537 #define BTM_SEC_LINK_KEY_KNOWN BTM_SEC_FLAG_LKEY_KNOWN /* 0x10 */ 538 #define BTM_SEC_LINK_KEY_AUTHED 0x20 539 #define BTM_SEC_ROLE_SWITCHED 0x40 540 #define BTM_SEC_IN_USE 0x80 541 542 UINT8 sec_flags; /* Current device security state */ 543 544 tBTM_BD_NAME sec_bd_name; /* User friendly name of the device. (may be truncated to save space in dev_rec table) */ 545 BD_FEATURES features[HCI_EXT_FEATURES_PAGE_MAX + 1]; /* Features supported by the device */ 546 UINT8 num_read_pages; 547 548 #define BTM_SEC_STATE_IDLE 0 549 #define BTM_SEC_STATE_AUTHENTICATING 1 550 #define BTM_SEC_STATE_ENCRYPTING 2 551 #define BTM_SEC_STATE_GETTING_NAME 3 552 #define BTM_SEC_STATE_AUTHORIZING 4 553 #define BTM_SEC_STATE_SWITCHING_ROLE 5 554 #define BTM_SEC_STATE_DISCONNECTING 6 555 #define BTM_SEC_STATE_DELAY_FOR_ENC 7 /* delay to check for encryption to work around controller problems */ 556 557 UINT8 sec_state; /* Operating state */ 558 BOOLEAN is_originator; /* TRUE if device is originating connection */ 559 #if (L2CAP_UCD_INCLUDED == TRUE) 560 BOOLEAN is_ucd; /* TRUE if device is sending or receiving UCD */ 561 /* if incoming security failed, received UCD will be discarded */ 562 #endif 563 BOOLEAN role_master; /* TRUE if current mode is master */ 564 UINT16 security_required; /* Security required for connection */ 565 BOOLEAN link_key_not_sent; /* link key notification has not been sent waiting for name */ 566 UINT8 link_key_type; /* Type of key used in pairing */ 567 BOOLEAN link_key_changed; /* Changed link key during current connection */ 568 569 #define BTM_MAX_PRE_SM4_LKEY_TYPE BTM_LKEY_TYPE_REMOTE_UNIT /* the link key type used by legacy pairing */ 570 571 #define BTM_SM4_UNKNOWN 0x00 572 #define BTM_SM4_KNOWN 0x10 573 #define BTM_SM4_TRUE 0x11 574 #define BTM_SM4_REQ_PEND 0x08 /* set this bit when getting remote features */ 575 #define BTM_SM4_UPGRADE 0x04 /* set this bit when upgrading link key */ 576 #define BTM_SM4_RETRY 0x02 /* set this bit to retry on HCI_ERR_KEY_MISSING or HCI_ERR_LMP_ERR_TRANS_COLLISION */ 577 #define BTM_SM4_DD_ACP 0x20 /* set this bit to indicate peer initiated dedicated bonding */ 578 #define BTM_SM4_CONN_PEND 0x40 /* set this bit to indicate accepting acl conn; to be cleared on btm_acl_created */ 579 UINT8 sm4; /* BTM_SM4_TRUE, if the peer supports SM4 */ 580 tBTM_IO_CAP rmt_io_caps; /* IO capability of the peer device */ 581 BOOLEAN rmt_auth_req; /* the auth_req flag as in the IO caps rsp evt */ 582 583 #if (BLE_INCLUDED == TRUE) 584 UINT8 enc_key_size; /* current link encryption key size */ 585 tBTM_SEC_BLE ble; 586 tBT_DEVICE_TYPE device_type; 587 tBTM_LE_CONN_PRAMS conn_params; 588 #endif 589 590 // btla-specific ++ 591 #if BTM_DISC_DURING_RS == TRUE 592 #define BTM_SEC_RS_NOT_PENDING 0 /* Role Switch not in progress */ 593 #define BTM_SEC_RS_PENDING 1 /* Role Switch in progress */ 594 #define BTM_SEC_DISC_PENDING 2 /* Disconnect is pending */ 595 UINT8 rs_disc_pending; 596 #endif 597 // btla-specific -- 598 #define BTM_SEC_NO_LAST_SERVICE_ID 0 599 UINT8 last_author_service_id; /* ID of last serviced authorized: Reset after each l2cap connection */ 600 601 } tBTM_SEC_DEV_REC; 602 603 #define BTM_SEC_IS_SM4(sm) ((BOOLEAN)(BTM_SM4_TRUE == ((sm)&BTM_SM4_TRUE))) 604 #define BTM_SEC_IS_SM4_LEGACY(sm) ((BOOLEAN)(BTM_SM4_KNOWN == ((sm)&BTM_SM4_TRUE))) 605 #define BTM_SEC_IS_SM4_UNKNOWN(sm) ((BOOLEAN)(BTM_SM4_UNKNOWN == ((sm)&BTM_SM4_TRUE))) 606 607 608 /* 609 ** Define device configuration structure 610 */ 611 typedef struct 612 { 613 #if BTM_MAX_LOC_BD_NAME_LEN > 0 614 tBTM_LOC_BD_NAME bd_name; /* local Bluetooth device name */ 615 #endif 616 BOOLEAN pin_type; /* TRUE if PIN type is fixed */ 617 UINT8 pin_code_len; /* Bonding information */ 618 PIN_CODE pin_code; /* PIN CODE if pin type is fixed */ 619 BOOLEAN connectable; /* If TRUE page scan should be enabled */ 620 UINT8 def_inq_scan_mode; /* ??? limited/general/none */ 621 } tBTM_CFG; 622 623 #if BTM_PWR_MGR_INCLUDED == TRUE 624 enum 625 { 626 BTM_PM_ST_ACTIVE = BTM_PM_STS_ACTIVE, 627 BTM_PM_ST_HOLD = BTM_PM_STS_HOLD, 628 BTM_PM_ST_SNIFF = BTM_PM_STS_SNIFF, 629 BTM_PM_ST_PARK = BTM_PM_STS_PARK, 630 BTM_PM_ST_PENDING = BTM_PM_STS_PENDING 631 }; 632 typedef UINT8 tBTM_PM_STATE; 633 634 enum 635 { 636 BTM_PM_SET_MODE_EVT, /* Set power mode API is called. */ 637 BTM_PM_UPDATE_EVT, 638 BTM_PM_RD_MODE_EVT /* Read power mode API is called. */ 639 }; 640 typedef UINT8 tBTM_PM_EVENT; 641 642 typedef struct 643 { 644 UINT16 event; 645 UINT16 len; 646 UINT8 link_ind; 647 } tBTM_PM_MSG_DATA; 648 649 typedef struct 650 { 651 UINT8 hci_status; 652 UINT8 mode; 653 UINT16 interval; 654 } tBTM_PM_MD_CHG_DATA; 655 656 typedef struct 657 { 658 UINT8 pm_id; /* the entity that calls SetPowerMode API */ 659 tBTM_PM_PWR_MD *p_pmd; 660 } tBTM_PM_SET_MD_DATA; 661 662 typedef struct 663 { 664 void *p_data; 665 UINT8 link_ind; 666 } tBTM_PM_SM_DATA; 667 668 typedef struct 669 { 670 tBTM_PM_PWR_MD req_mode[BTM_MAX_PM_RECORDS+1]; /* the desired mode and parameters of the connection*/ 671 tBTM_PM_PWR_MD set_mode; /* the mode and parameters sent down to the host controller. */ 672 UINT16 interval; /* the interval from last mode change event. */ 673 #if (BTM_SSR_INCLUDED == TRUE) 674 UINT16 max_lat; /* stored SSR maximum latency */ 675 UINT16 min_rmt_to;/* stored SSR minimum remote timeout */ 676 UINT16 min_loc_to;/* stored SSR minimum local timeout */ 677 #endif 678 tBTM_PM_STATE state; /* contains the current mode of the connection */ 679 BOOLEAN chg_ind; /* a request change indication */ 680 } tBTM_PM_MCB; 681 682 #define BTM_PM_REC_NOT_USED 0 683 typedef struct 684 { 685 tBTM_PM_STATUS_CBACK *cback;/* to notify the registered party of mode change event */ 686 UINT8 mask; /* registered request mask. 0, if this entry is not used */ 687 } tBTM_PM_RCB; 688 #endif /* BTM_PWR_MGR_INCLUDED */ 689 690 enum 691 { 692 BTM_BLI_ACL_UP_EVT, 693 BTM_BLI_ACL_DOWN_EVT, 694 BTM_BLI_PAGE_EVT, 695 BTM_BLI_PAGE_DONE_EVT, 696 BTM_BLI_INQ_EVT, 697 BTM_BLI_INQ_CANCEL_EVT, 698 BTM_BLI_INQ_DONE_EVT 699 }; 700 typedef UINT8 tBTM_BLI_EVENT; 701 702 /* Pairing State */ 703 enum 704 { 705 BTM_PAIR_STATE_IDLE, /* Idle */ 706 BTM_PAIR_STATE_GET_REM_NAME, /* Getting the remote name (to check for SM4) */ 707 BTM_PAIR_STATE_WAIT_PIN_REQ, /* Started authentication, waiting for PIN req (PIN is pre-fetched) */ 708 BTM_PAIR_STATE_WAIT_LOCAL_PIN, /* Waiting for local PIN code */ 709 BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM, /* Waiting user 'yes' to numeric confirmation */ 710 BTM_PAIR_STATE_KEY_ENTRY, /* Key entry state (we are a keyboard) */ 711 BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP, /* Waiting for local response to peer OOB data */ 712 BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS, /* Waiting for local IO capabilities and OOB data */ 713 BTM_PAIR_STATE_INCOMING_SSP, /* Incoming SSP (got peer IO caps when idle) */ 714 BTM_PAIR_STATE_WAIT_AUTH_COMPLETE, /* All done, waiting authentication cpmplete */ 715 BTM_PAIR_STATE_WAIT_DISCONNECT /* Waiting to disconnect the ACL */ 716 }; 717 typedef UINT8 tBTM_PAIRING_STATE; 718 719 #define BTM_PAIR_FLAGS_WE_STARTED_DD 0x01 /* We want to do dedicated bonding */ 720 #define BTM_PAIR_FLAGS_PEER_STARTED_DD 0x02 /* Peer initiated dedicated bonding */ 721 #define BTM_PAIR_FLAGS_DISC_WHEN_DONE 0x04 722 #define BTM_PAIR_FLAGS_PIN_REQD 0x08 /* set this bit when pin_callback is called */ 723 #define BTM_PAIR_FLAGS_PRE_FETCH_PIN 0x10 /* set this bit when pre-fetch pin */ 724 #define BTM_PAIR_FLAGS_REJECTED_CONNECT 0x20 /* set this bit when rejected incoming connection */ 725 #define BTM_PAIR_FLAGS_WE_CANCEL_DD 0x40 /* set this bit when cancelling a bonding procedure */ 726 727 typedef struct 728 { 729 BOOLEAN is_mux; 730 BD_ADDR bd_addr; 731 UINT16 psm; 732 BOOLEAN is_orig; 733 tBTM_SEC_CALLBACK *p_callback; 734 void *p_ref_data; 735 UINT32 mx_proto_id; 736 UINT32 mx_chan_id; 737 } tBTM_SEC_QUEUE_ENTRY; 738 739 #if (L2CAP_UCD_INCLUDED == TRUE) 740 741 #define CONN_ORIENT_TERM 0x00 /* incoming connection oriented */ 742 #define CONN_ORIENT_ORIG 0x01 /* outgoing connection oriented */ 743 #define CONNLESS_TERM 0x02 /* incoming connectionless */ 744 #define CONNLESS_ORIG 0x03 /* outgoing connectionless */ 745 #define CONNECTION_TYPE_ORIG_MASK 0x01 /* mask for direction */ 746 #define CONNECTION_TYPE_CONNLESS_MASK 0x02 /* mask for connectionless or not */ 747 typedef UINT8 CONNECTION_TYPE; 748 749 #else 750 751 #define CONN_ORIENT_TERM FALSE 752 #define CONN_ORIENT_ORIG TRUE 753 typedef BOOLEAN CONNECTION_TYPE; 754 755 #endif /* (L2CAP_UCD_INCLUDED == TRUE) */ 756 757 /* Define a structure to hold all the BTM data 758 */ 759 760 #define BTM_STATE_BUFFER_SIZE 5 /* size of state buffer */ 761 762 #if (BTM_PCM2_INCLUDED == TRUE) 763 /* Define pcm2_action */ 764 enum 765 { 766 BTM_PCM2_ACT_NONE, 767 BTM_PCM2_ACT_SENT_ARC, 768 BTM_PCM2_READ_PARAM, 769 BTM_PCM2_WRITE_PARAM, 770 }; 771 typedef UINT8 tBTM_PCM2_ACTION; 772 #endif 773 774 typedef struct 775 { 776 tBTM_CFG cfg; /* Device configuration */ 777 778 /**************************************************** 779 ** ACL Management 780 ****************************************************/ 781 tACL_CONN acl_db[MAX_L2CAP_LINKS]; 782 #if( RFCOMM_INCLUDED==TRUE) 783 UINT8 btm_scn[BTM_MAX_SCN]; /* current SCNs: TRUE if SCN is in use */ 784 #endif 785 UINT16 btm_def_link_policy; 786 UINT16 btm_def_link_super_tout; 787 788 #if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) 789 tBTM_BL_EVENT_MASK bl_evt_mask; 790 tBTM_BL_CHANGE_CB *p_bl_changed_cb; /* Callback for when Busy Level changed */ 791 #else 792 tBTM_ACL_DB_CHANGE_CB *p_acl_changed_cb; /* Callback for when ACL DB changed */ 793 #endif 794 795 tBTM_LSTO_CBACK *p_lsto_cback; /* for link supervision timeout change event */ 796 797 /**************************************************** 798 ** Power Management 799 ****************************************************/ 800 #if BTM_PWR_MGR_INCLUDED == TRUE 801 tBTM_PM_MCB pm_mode_db[MAX_L2CAP_LINKS]; /* per ACL link */ 802 tBTM_PM_RCB pm_reg_db[BTM_MAX_PM_RECORDS+1]; /* per application/module */ 803 UINT8 pm_pend_link; /* the index of acl_db, which has a pending PM cmd */ 804 UINT8 pm_pend_id; /* the id pf the module, which has a pending PM cmd */ 805 #endif /* BTM_PWR_MGR_INCLUDED == TRUE */ 806 807 /***************************************************** 808 ** Device control 809 *****************************************************/ 810 tBTM_DEVCB devcb; 811 812 /***************************************************** 813 ** BLE Device controllers 814 *****************************************************/ 815 #if (BLE_INCLUDED == TRUE) 816 tBTM_BLE_CB ble_ctr_cb; 817 818 UINT16 enc_handle; 819 BT_OCTET8 enc_rand; /* received rand value from LTK request*/ 820 UINT16 ediv; /* received ediv value from LTK request */ 821 UINT8 key_size; 822 #endif 823 824 /* Packet types supported by the local device */ 825 UINT16 btm_acl_pkt_types_supported; 826 UINT16 btm_sco_pkt_types_supported; 827 828 829 /***************************************************** 830 ** Inquiry 831 *****************************************************/ 832 tBTM_INQUIRY_VAR_ST btm_inq_vars; 833 tBTM_FILTER_CB *p_inq_filter_cb; /* Callback that can be set if host */ 834 /* wants to verify inquiry filters */ 835 836 /***************************************************** 837 ** SCO Management 838 *****************************************************/ 839 #if BTM_SCO_INCLUDED == TRUE 840 tSCO_CB sco_cb; 841 #endif 842 843 /***************************************************** 844 ** Security Management 845 *****************************************************/ 846 tBTM_APPL_INFO api; 847 848 #define BTM_SEC_MAX_RMT_NAME_CALLBACKS 2 849 tBTM_RMT_NAME_CALLBACK *p_rmt_name_callback[BTM_SEC_MAX_RMT_NAME_CALLBACKS]; 850 851 tBTM_FILTER_CB *p_conn_filter_cb; /* Callback that can be set if host */ 852 /* wants to verify connectability filters*/ 853 854 tBTM_SEC_DEV_REC *p_collided_dev_rec; 855 TIMER_LIST_ENT sec_collision_tle; 856 UINT32 collision_start_time; 857 UINT32 max_collision_delay; 858 UINT32 dev_rec_count; /* Counter used for device record timestamp */ 859 UINT8 security_mode; 860 BOOLEAN pairing_disabled; 861 BOOLEAN connect_only_paired; 862 BOOLEAN security_mode_changed; /* mode changed during bonding */ 863 BOOLEAN pin_type_changed; /* pin type changed during bonding */ 864 BOOLEAN sec_req_pending; /* TRUE if a request is pending */ 865 // btla-specific ++ 866 #ifdef PORCHE_PAIRING_CONFLICT 867 UINT8 pin_code_len_saved; /* for legacy devices */ 868 #endif 869 // btla-specific -- 870 871 UINT8 pin_code_len; /* for legacy devices */ 872 PIN_CODE pin_code; /* for legacy devices */ 873 tBTM_PAIRING_STATE pairing_state; /* The current pairing state */ 874 UINT8 pairing_flags; /* The current pairing flags */ 875 BD_ADDR pairing_bda; /* The device currently pairing */ 876 TIMER_LIST_ENT pairing_tle; /* Timer for pairing process */ 877 UINT16 disc_handle; /* for legacy devices */ 878 UINT8 disc_reason; /* for legacy devices */ 879 tBTM_SEC_SERV_REC sec_serv_rec[BTM_SEC_MAX_SERVICE_RECORDS]; 880 tBTM_SEC_DEV_REC sec_dev_rec[BTM_SEC_MAX_DEVICE_RECORDS]; 881 tBTM_SEC_SERV_REC *p_out_serv; 882 tBTM_MKEY_CALLBACK *mkey_cback; 883 884 BD_ADDR connecting_bda; 885 DEV_CLASS connecting_dc; 886 887 UINT8 first_disabled_channel; 888 UINT8 last_disabled_channel; 889 890 UINT8 acl_disc_reason; 891 UINT8 trace_level; 892 #if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) 893 UINT8 num_acl; /* num of active ACL links */ 894 UINT8 busy_level; /* the current busy level */ 895 BOOLEAN is_paging; /* TRUE, if paging is in progess */ 896 BOOLEAN is_inquiry; /* TRUE, if inquiry is in progess */ 897 #endif 898 BUFFER_Q page_queue; 899 BOOLEAN paging; 900 BOOLEAN discing; 901 BUFFER_Q sec_pending_q; /* pending sequrity requests in tBTM_SEC_QUEUE_ENTRY format */ 902 903 #if (!defined(BT_TRACE_VERBOSE) || (BT_TRACE_VERBOSE == FALSE)) 904 char state_temp_buffer[BTM_STATE_BUFFER_SIZE]; 905 #endif 906 907 #if (defined(BTM_PCM2_INCLUDED) && BTM_PCM2_INCLUDED == TRUE) 908 UINT16 sys_features; 909 UINT8 pcm2_params[BRCM_PCM2_SETUP_WRITE_SIZE]; 910 tBTM_PCM2_ACTION pcm2_action; 911 #endif 912 913 BD_ADDR previous_connected_remote_addr[BTM_ROLE_DEVICE_NUM]; 914 UINT8 previous_connected_role[BTM_ROLE_DEVICE_NUM]; 915 UINT8 front; /* front index of the role table */ 916 } tBTM_CB; 917 918 919 #ifdef __cplusplus 920 extern "C" 921 { 922 #endif 923 924 #if BTM_DYNAMIC_MEMORY == FALSE 925 BTM_API extern tBTM_CB btm_cb; 926 #else 927 BTM_API extern tBTM_CB *btm_cb_ptr; 928 #define btm_cb (*btm_cb_ptr) 929 #endif 930 931 /* Internal functions provided by btm_main.c 932 ******************************************** 933 */ 934 extern void btm_init (void); 935 936 /* Internal functions provided by btm_inq.c 937 ******************************************* 938 */ 939 extern tBTM_STATUS btm_initiate_rem_name (BD_ADDR remote_bda, 940 tBTM_INQ_INFO *p_cur, 941 UINT8 origin, UINT32 timeout, 942 tBTM_CMPL_CB *p_cb); 943 944 extern void btm_process_remote_name (BD_ADDR bda, BD_NAME name, UINT16 evt_len, 945 UINT8 hci_status); 946 extern void btm_inq_rmt_name_failed(void); 947 948 /* Inquiry related functions */ 949 extern void btm_clr_inq_db (BD_ADDR p_bda); 950 extern void btm_inq_db_init (void); 951 extern void btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode); 952 extern void btm_process_inq_complete (UINT8 status, UINT8 mode); 953 extern void btm_event_filter_complete (UINT8 *p); 954 extern void btm_inq_stop_on_ssp(void); 955 extern void btm_inq_clear_ssp(void); 956 extern tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda); 957 extern BOOLEAN btm_inq_find_bdaddr (BD_ADDR p_bda); 958 959 #if (BTM_EIR_CLIENT_INCLUDED == TRUE) 960 extern BOOLEAN btm_lookup_eir(BD_ADDR_PTR p_rem_addr); 961 #endif 962 963 /* Internal functions provided by btm_acl.c 964 ******************************************** 965 */ 966 extern void btm_acl_init (void); 967 extern void btm_acl_timeout (TIMER_LIST_ENT *p_tle); 968 extern void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn, 969 UINT16 hci_handle, UINT8 link_role, UINT8 is_le_link); 970 extern void btm_acl_removed (BD_ADDR bda); 971 extern void btm_acl_device_down (void); 972 extern void btm_acl_update_busy_level (tBTM_BLI_EVENT event); 973 extern void btm_acl_link_key_change (UINT16 handle, UINT8 status); 974 975 extern void btm_cont_rswitch_or_chglinkkey (tACL_CONN *p, 976 tBTM_SEC_DEV_REC *p_dev_rec, 977 UINT8 hci_status); 978 979 extern UINT8 btm_handle_to_acl_index (UINT16 hci_handle); 980 extern void btm_read_link_policy_complete (UINT8 *p); 981 extern void btm_read_rssi_complete (UINT8 *p); 982 extern void btm_read_tx_power_complete (UINT8 *p, BOOLEAN is_ble); 983 extern void btm_read_link_quality_complete (UINT8 *p); 984 extern tBTM_STATUS btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types); 985 extern void btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset); 986 extern void btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role); 987 extern void btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 988 BTM_API extern UINT16 btm_get_acl_disc_reason_code (void); 989 BTM_API extern tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr); 990 extern void btm_read_remote_features_complete (UINT8 *p); 991 extern void btm_read_remote_ext_features_complete (UINT8 *p); 992 extern void btm_read_remote_ext_features_failed (UINT8 status, UINT16 handle); 993 extern void btm_read_remote_version_complete (UINT8 *p); 994 // btla-specific ++ 995 extern void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type); 996 // btla-specific -- 997 /* Read maximum data packet that can be sent over current connection */ 998 extern UINT16 btm_get_max_packet_size (BD_ADDR addr); 999 extern tACL_CONN *btm_bda_to_acl (BD_ADDR bda); 1000 extern BOOLEAN btm_acl_notif_conn_collision (BD_ADDR bda); 1001 1002 #if BTM_PWR_MGR_INCLUDED == FALSE 1003 extern void btm_process_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 1004 UINT16 interval); 1005 1006 /* Internal functions provided by btm_pm.c 1007 ******************************************** 1008 */ 1009 #else 1010 extern void btm_pm_reset(void); 1011 extern void btm_pm_sm_alloc(UINT8 ind); 1012 extern void btm_pm_proc_cmd_status(UINT8 status); 1013 extern void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 1014 UINT16 interval); 1015 extern void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len); 1016 #if BTM_SCO_INCLUDED == TRUE 1017 extern void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle); 1018 #else 1019 #define btm_sco_chk_pend_unpark(hci_status, hci_handle) 1020 #endif /* BTM_SCO_INCLUDED */ 1021 #endif /* BTM_PWR_MGR_INCLUDED == FALSE */ 1022 extern void btm_qos_setup_complete (UINT8 status, UINT16 handle, FLOW_SPEC *p_flow); 1023 1024 1025 /* Internal functions provided by btm_sco.c 1026 ******************************************** 1027 */ 1028 extern void btm_sco_init (void); 1029 extern void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle, 1030 tBTM_ESCO_DATA *p_esco_data); 1031 extern void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval, 1032 UINT8 retrans_window, UINT16 rx_pkt_len, 1033 UINT16 tx_pkt_len); 1034 extern void btm_sco_conn_req (BD_ADDR bda, DEV_CLASS dev_class, UINT8 link_type); 1035 extern void btm_sco_removed (UINT16 hci_handle, UINT8 reason); 1036 extern void btm_sco_acl_removed (BD_ADDR bda); 1037 extern void btm_route_sco_data (BT_HDR *p_msg); 1038 extern BOOLEAN btm_is_sco_active (UINT16 handle); 1039 extern void btm_remove_sco_links (BD_ADDR bda); 1040 extern BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda); 1041 1042 extern tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms); 1043 extern UINT16 btm_find_scb_by_handle (UINT16 handle); 1044 extern void btm_sco_flush_sco_data(UINT16 sco_inx); 1045 1046 /* Internal functions provided by btm_devctl.c 1047 ********************************************** 1048 */ 1049 extern void btm_dev_init (void); 1050 extern void btm_dev_absent (void); 1051 extern void btm_dev_timeout (TIMER_LIST_ENT *p_tle); 1052 extern void btm_reset_complete (void); 1053 extern void btm_read_local_version_complete (UINT8 *p, UINT16 evt_len); 1054 extern void btm_read_hci_buf_size_complete (UINT8 *p, UINT16 evt_len); 1055 extern void btm_read_local_supported_cmds_complete (UINT8 *p); 1056 extern void btm_read_local_features_complete (UINT8 *p, UINT16 evt_len); 1057 extern void btm_read_local_ext_features_complete (UINT8 *p, UINT16 evt_len); 1058 extern void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len); 1059 extern void btm_read_local_addr_complete (UINT8 *p, UINT16 evt_len); 1060 extern void btm_reset_ctrlr_complete (void); 1061 extern void btm_write_simple_paring_mode_complete (UINT8 *p); 1062 extern void btm_write_le_host_supported_complete (UINT8 *p); 1063 1064 #if (BLE_INCLUDED == TRUE) 1065 extern void btm_read_ble_buf_size_complete (UINT8 *p, UINT16 evt_len); 1066 extern void btm_read_ble_local_supported_features_complete (UINT8 *p, UINT16 evt_len); 1067 extern void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len); 1068 extern void btm_ble_add_2_white_list_complete(UINT8 status); 1069 extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len); 1070 extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len); 1071 #endif /* BLE_INCLUDED */ 1072 1073 /* Vendor Specific Command complete evt handler */ 1074 extern void btm_vsc_complete (UINT8 *p, UINT16 cc_opcode, UINT16 evt_len, 1075 tBTM_CMPL_CB *p_vsc_cplt_cback); 1076 extern void btm_inq_db_reset (void); 1077 extern void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len); 1078 extern UINT8 btm_get_hci_version (void); 1079 extern void btm_read_stored_link_key_complete (UINT8 *p); 1080 extern void btm_write_stored_link_key_complete (UINT8 *p); 1081 extern void btm_delete_stored_link_key_complete (UINT8 *p); 1082 extern void btm_return_link_keys_evt (tBTM_RETURN_LINK_KEYS_EVT *result); 1083 extern void btm_report_device_status (tBTM_DEV_STATUS status); 1084 1085 1086 /* Internal functions provided by btm_dev.c 1087 ********************************************** 1088 */ 1089 extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1090 extern UINT8 btm_get_voice_coding_support (void); 1091 1092 extern tBTM_SEC_DEV_REC *btm_sec_alloc_dev (BD_ADDR bd_addr); 1093 extern void btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec); 1094 extern tBTM_SEC_DEV_REC *btm_find_dev (BD_ADDR bd_addr); 1095 extern tBTM_SEC_DEV_REC *btm_find_or_alloc_dev (BD_ADDR bd_addr); 1096 extern tBTM_SEC_DEV_REC *btm_find_dev_by_handle (UINT16 handle); 1097 1098 /* Internal functions provided by btm_sec.c 1099 ********************************************** 1100 */ 1101 extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1102 extern tBTM_STATUS btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm, 1103 UINT16 handle, CONNECTION_TYPE conn_type, 1104 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1105 extern tBTM_STATUS btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator, 1106 UINT32 mx_proto_id, UINT32 mx_chan_id, 1107 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1108 extern void btm_sec_conn_req (UINT8 *bda, UINT8 *dc); 1109 extern void btm_create_conn_cancel_complete (UINT8 *p); 1110 extern void btm_proc_lsto_evt(UINT16 handle, UINT16 timeout); 1111 extern void btm_read_linq_tx_power_complete (UINT8 *p); 1112 1113 extern void btm_sec_init (UINT8 sec_mode); 1114 extern void btm_sec_dev_reset (void); 1115 extern void btm_sec_abort_access_req (BD_ADDR bd_addr); 1116 extern void btm_sec_auth_complete (UINT16 handle, UINT8 status); 1117 extern void btm_sec_mkey_comp_event (UINT16 handle, UINT8 status, UINT8 key_flg); 1118 extern void btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 1119 extern void btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode); 1120 extern tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason); 1121 extern void btm_sec_disconnected (UINT16 handle, UINT8 reason); 1122 extern void btm_sec_rmt_name_request_complete (UINT8 *bd_addr, UINT8 *bd_name, UINT8 status); 1123 extern void btm_sec_rmt_host_support_feat_evt (UINT8 *p); 1124 extern void btm_io_capabilities_req (UINT8 *p); 1125 extern void btm_io_capabilities_rsp (UINT8 *p); 1126 extern void btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p); 1127 extern void btm_keypress_notif_evt (UINT8 *p); 1128 extern void btm_simple_pair_complete (UINT8 *p); 1129 extern void btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type); 1130 extern void btm_sec_link_key_request (UINT8 *p_bda); 1131 extern void btm_sec_pin_code_request (UINT8 *p_bda); 1132 extern void btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset); 1133 extern void btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res); 1134 1135 #if BLE_INCLUDED == TRUE 1136 extern void btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC *p_dev_rec); 1137 extern BOOLEAN btm_sec_find_bonded_dev (UINT8 start_idx, UINT8 *p_found_idx, tBTM_SEC_DEV_REC *p_rec); 1138 extern BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda); 1139 extern BOOLEAN btm_sec_is_le_capable_dev (BD_ADDR bda); 1140 #endif /* BLE_INCLUDED */ 1141 1142 extern tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda); 1143 1144 #if BTM_OOB_INCLUDED == TRUE 1145 extern void btm_rem_oob_req (UINT8 *p); 1146 extern void btm_read_local_oob_complete (UINT8 *p); 1147 #else 1148 #define btm_rem_oob_req(p) 1149 #define btm_read_local_oob_complete(p) 1150 #endif 1151 1152 extern void btm_acl_resubmit_page (void); 1153 extern void btm_acl_reset_paging (void); 1154 extern void btm_acl_paging (BT_HDR *p, BD_ADDR dest); 1155 extern void btm_acl_set_discing (BOOLEAN discing); 1156 extern UINT8 btm_sec_clr_service_by_psm (UINT16 psm); 1157 extern void btm_sec_clr_temp_auth_service (BD_ADDR bda); 1158 1159 #ifdef __cplusplus 1160 } 1161 #endif 1162 1163 #endif 1164 1165
