Lines Matching refs:asked
3 'assignment': '\nAssignment statements\n*********************\n\nAssignment statements are used to (re)bind names to values and to\nmodify attributes or items of mutable objects:\n\n assignment_stmt ::= (target_list "=")+ (expression_list | yield_expression)\n target_list ::= target ("," target)* [","]\n target ::= identifier\n | "(" target_list ")"\n | "[" target_list "]"\n | attributeref\n | subscription\n | slicing\n\n(See section *Primaries* for the syntax definitions for the last three\nsymbols.)\n\nAn assignment statement evaluates the expression list (remember that\nthis can be a single expression or a comma-separated list, the latter\nyielding a tuple) and assigns the single resulting object to each of\nthe target lists, from left to right.\n\nAssignment is defined recursively depending on the form of the target\n(list). When a target is part of a mutable object (an attribute\nreference, subscription or slicing), the mutable object must\nultimately perform the assignment and decide about its validity, and\nmay raise an exception if the assignment is unacceptable. The rules\nobserved by various types and the exceptions raised are given with the\ndefinition of the object types (see section *The standard type\nhierarchy*).\n\nAssignment of an object to a target list is recursively defined as\nfollows.\n\n* If the target list is a single target: The object is assigned to\n that target.\n\n* If the target list is a comma-separated list of targets: The object\n must be an iterable with the same number of items as there are\n targets in the target list, and the items are assigned, from left to\n right, to the corresponding targets.\n\nAssignment of an object to a single target is recursively defined as\nfollows.\n\n* If the target is an identifier (name):\n\n * If the name does not occur in a ``global`` statement in the\n current code block: the name is bound to the object in the current\n local namespace.\n\n * Otherwise: the name is bound to the object in the current global\n namespace.\n\n The name is rebound if it was already bound. This may cause the\n reference count for the object previously bound to the name to reach\n zero, causing the object to be deallocated and its destructor (if it\n has one) to be called.\n\n* If the target is a target list enclosed in parentheses or in square\n brackets: The object must be an iterable with the same number of\n items as there are targets in the target list, and its items are\n assigned, from left to right, to the corresponding targets.\n\n* If the target is an attribute reference: The primary expression in\n the reference is evaluated. It should yield an object with\n assignable attributes; if this is not the case, ``TypeError`` is\n raised. That object is then asked to assign the assigned object to\n the given attribute; if it cannot perform the assignment, it raises\n an exception (usually but not necessarily ``AttributeError``).\n\n Note: If the object is a class instance and the attribute reference\n occurs on both sides of the assignment operator, the RHS expression,\n ``a.x`` can access either an instance attribute or (if no instance\n attribute exists) a class attribute. The LHS target ``a.x`` is\n always set as an instance attribute, creating it if necessary.\n Thus, the two occurrences of ``a.x`` do not necessarily refer to the\n same attribute: if the RHS expression refers to a class attribute,\n the LHS creates a new instance attribute as the target of the\n assignment:\n\n class Cls:\n x = 3 # class variable\n inst = Cls()\n inst.x = inst.x + 1 # writes inst.x as 4 leaving Cls.x as 3\n\n This description does not necessarily apply to descriptor\n attributes, such as properties created with ``property()``.\n\n* If the target is a subscription: The primary expression in the\n reference is evaluated. It should yield either a mutable sequence\n object (such as a list) or a mapping object (such as a dictionary).\n Next, the subscript expression is evaluated.\n\n If the primary is a mutable sequence object (such as a list), the\n subscript must yield a plain integer. If it is negative, the\n sequence\'s length is added to it. The resulting value must be a\n nonnegative integer less than the sequence\'s length, and the\n sequence is asked to assign the assigned object to its item with\n that index. If the index is out of range, ``IndexError`` is raised\n (assignment to a subscripted sequence cannot add new items to a\n list).\n\n If the primary is a mapping object (such as a dictionary), the\n subscript must have a type compatible with the mapping\'s key type,\n and the mapping is then asked to create a key/datum pair which maps\n the subscript to the assigned object. This can either replace an\n existing key/value pair with the same key value, or insert a new\n key/value pair (if no key with the same value existed).\n\n* If the target is a slicing: The primary expression in the reference\n is evaluated. It should yield a mutable sequence object (such as a\n list). The assigned object should be a sequence object of the same\n type. Next, the lower and upper bound expressions are evaluated,\n insofar they are present; defaults are zero and the sequence\'s\n length. The bounds should evaluate to (small) integers. If either\n bound is negative, the sequence\'s length is added to it. The\n resulting bounds are clipped to lie between zero and the sequence\'s\n length, inclusive. Finally, the sequence object is asked to replace\n the slice with the items of the assigned sequence. The length of\n the slice may be different from the length of the assigned sequence,\n thus changing the length of the target sequence, if the object\n allows it.\n\n**CPython implementation detail:** In the current implementation, the\nsyntax for targets is taken to be the same as for expressions, and\ninvalid syntax is rejected during the code generation phase, causing\nless detailed error messages.\n\nWARNING: Although the definition of assignment implies that overlaps\nbetween the left-hand side and the right-hand side are \'safe\' (for\nexample ``a, b = b, a`` swaps two variables), overlaps *within* the\ncollection of assigned-to variables are not safe! For instance, the\nfollowing program prints ``[0, 2]``:\n\n x = [0, 1]\n i = 0\n i, x[i] = 1, 2\n print x\n\n\nAugmented assignment statements\n===============================\n\nAugmented assignment is the combination, in a single statement, of a\nbinary operation and an assignment statement:\n\n augmented_assignment_stmt ::= augtarget augop (expression_list | yield_expression)\n augtarget ::= identifier | attributeref | subscription | slicing\n augop ::= "+=" | "-=" | "*=" | "/=" | "//=" | "%=" | "**="\n | ">>=" | "<<=" | "&=" | "^=" | "|="\n\n(See section *Primaries* for the syntax definitions for the last three\nsymbols.)\n\nAn augmented assignment evaluates the target (which, unlike normal\nassignment statements, cannot be an unpacking) and the expression\nlist, performs the binary operation specific to the type of assignment\non the two operands, and assigns the result to the original target.\nThe target is only evaluated once.\n\nAn augmented assignment expression like ``x += 1`` can be rewritten as\n``x = x + 1`` to achieve a similar, but not exactly equal effect. In\nthe augmented version, ``x`` is only evaluated once. Also, when\npossible, the actual operation is performed *in-place*, meaning that\nrather than creating a new object and assigning that to the target,\nthe old object is modified instead.\n\nWith the exception of assigning to tuples and multiple targets in a\nsingle statement, the assignment done by augmented assignment\nstatements is handled the same way as normal assignments. Similarly,\nwith the exception of the possible *in-place* behavior, the binary\noperation performed by augmented assignment is the same as the normal\nbinary operations.\n\nFor targets which are attribute references, the same *caveat about\nclass and instance attributes* applies as for regular assignments.\n',
7 'attribute-references': '\nAttribute references\n********************\n\nAn attribute reference is a primary followed by a period and a name:\n\n attributeref ::= primary "." identifier\n\nThe primary must evaluate to an object of a type that supports\nattribute references, e.g., a module, list, or an instance. This\nobject is then asked to produce the attribute whose name is the\nidentifier. If this attribute is not available, the exception\n``AttributeError`` is raised. Otherwise, the type and value of the\nobject produced is determined by the object. Multiple evaluations of\nthe same attribute reference may yield different objects.\n',
67 ost of the attributes labelled "Writable" check the type of the\n assigned value.\n\n Changed in version 2.4: ``func_name`` is now writable.\n\n Function objects also support getting and setting arbitrary\n attributes, which can be used, for example, to attach metadata\n to functions. Regular attribute dot-notation is used to get and\n set such attributes. *Note that the current implementation only\n supports function attributes on user-defined functions. Function\n attributes on built-in functions may be supported in the\n future.*\n\n Additional information about a function\'s definition can be\n retrieved from its code object; see the description of internal\n types below.\n\n User-defined methods\n A user-defined method object combines a class, a class instance\n (or ``None``) and any callable object (normally a user-defined\n function).\n\n Special read-only attributes: ``im_self`` is the class instance\n object, ``im_func`` is the function object; ``im_class`` is the\n class of ``im_self`` for bound methods or the class that askedabled; bits ``0x10`` and ``0x1000`` were used in\n earlier versions of Python.\n\n Other bits in ``co_flags`` are reserved for internal use.\n\n If a code object represents a function, the first item in\n ``co_consts`` is the documentation string of the function, or\n ``None`` if undefined.\n\n Frame objects\n Frame objects represent execution frames. They may occur in\n traceback objects (see below).\n\n Special read-only attributes: ``f_back`` is to the previous\n stack frame (towards the caller), or ``None`` if this is the\n bottom stack frame; ``f_code`` is the code object being executed\n in this frame; ``f_locals`` is the dictionary used to look up\n local variables; ``f_globals`` is used for global variables;\n ``f_builtins`` is used for built-in (intrinsic) names;\n ``f_restricted`` is a flag indicating whether the function is\n executing in restricted execution mode; ``f_lasti`` gives the\n precise instruction (this is an index into the bytecode string\n of the code object).\n\n Special writable attributes: ``f_trace``, if not ``None``, is a\n function called at the start of each source code line (this is\n used by the debugger); ``f_exc_type``, ``f_exc_value``,\n ``f_exc_traceback`` represent the last exception raised in the\n parent frame provided another exception was ever raised in the\n current frame (in all other cases they are None); ``f_lineno``\n is the current line number of the frame --- writing to this from\n within a trace function jumps to the given line (only for the\n bottom-most frame). A debugger can implement a Jump command\n (aka Set Next Statement) by writing to f_lineno.\n\n Traceback objects\n Traceback objects represent a stack trace of an exception. A\n traceback object is created when an exception occurs. When the\n search for an exception handler unwinds the execution stack, at\n each unwound level a traceback object is inserted in front of\n the current traceback. When an exception handler is entered,\n the stack trace is made available to the program. (See section\n *The try statement*.) It is accessible as ``sys.exc_traceback``,\n and also as the third item of the tuple returned by\n ``sys.exc_info()``. The latter is the preferred interface,\n since it works correctly when the program is using multiple\n threads. When the program contains no suitable handler, the\n stack trace is written (nicely formatted) to the standard error\n stream; if the interpreter is interactive, it is also made\n available to the user as ``sys.last_traceback``.\n\n Special read-only attributes: ``tb_next`` is the next level in\n the stack trace (towards the frame where the exception\n occurred), or ``None`` if there is no next level; ``tb_frame``\n points to the execution frame of the current level;\n ``tb_lineno`` gives the line number where the exception\n occurred; ``tb_lasti`` indicates the precise instruction. The\n line number and last instruction in the traceback may differ\n from the line number of its frame object if the exception\n occurred in a ``try`` statement with no matching except clause\n or with a finally clause.\n\n Slice objects\n Slice objects are used to represent slices when *extended slice\n syntax* is used. This is a slice using two colons, or multiple\n slices or ellipses separated by commas, e.g., ``a[i:j:step]``,\n ``a[i:j, k:l]``, or ``a[..., i:j]``. They are also created by\n the built-in ``slice()`` function.\n\n Special read-only attributes: ``start`` is the lower bound;\n ``stop`` is the upper bound; ``step`` is the step value; each is\n ``None`` if omitted. These attributes can have any type.\n\n Slice objects support one method:\n\n slice.indices(self, length)\n\n This method takes a single integer argument *length* and\n computes information about the extended slice that the slice\n object would describe if applied to a sequence of *length*\n items. It returns a tuple of three integers; respectively\n these are the *start* and *stop* indices and the *step* or\n stride length of the slice. Missing or out-of-bounds indices\n are handled in a manner consistent with regular slices.\n\n New in version 2.3.\n\n Static method objects\n Static method objects provide a way of defeating the\n transformation of function objects to method objects described\n above. A static method object is a wrapper around any other\n object, usually a user-defined method object. When a static\n method object is retrieved from a class or a class instance, the\n object actually returned is the wrapped object, which is not\n subject to any further transformation. Static method objects are\n not themselves callable, although the objects they wrap usually\n are. Static method objects are created by the built-in\n ``staticmethod()`` constructor.\n\n Class method objects\n A class method object, like a static method object, is a wrapper\n around another object that alters the way in which that object\n is retrieved from classes and class instances. The behaviour of\n class method objects upon such retrieval is described above,\n under "User-defined methods". Class method objects are created\n by the built-in ``classmethod()`` constructor.\n',
