1 /* 2 * ARM virtual CPU header 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 #ifndef CPU_ARM_H 20 #define CPU_ARM_H 21 22 #include "config.h" 23 24 #include "kvm-consts.h" 25 26 #if defined(TARGET_AARCH64) 27 /* AArch64 definitions */ 28 # define TARGET_LONG_BITS 64 29 # define ELF_MACHINE EM_AARCH64 30 #else 31 # define TARGET_LONG_BITS 32 32 # define ELF_MACHINE EM_ARM 33 #endif 34 35 // TODO(digit): Remove this line. 36 #define CPUOldState struct CPUARMState 37 38 #define CPUArchState struct CPUARMState 39 40 #include "qemu-common.h" 41 #include "exec/cpu-defs.h" 42 43 #include "fpu/softfloat.h" 44 45 #define TARGET_HAS_ICE 1 46 47 #define EXCP_UDEF 1 /* undefined instruction */ 48 #define EXCP_SWI 2 /* software interrupt */ 49 #define EXCP_PREFETCH_ABORT 3 50 #define EXCP_DATA_ABORT 4 51 #define EXCP_IRQ 5 52 #define EXCP_FIQ 6 53 #define EXCP_BKPT 7 54 #define EXCP_EXCEPTION_EXIT 8 /* Return from v7M exception. */ 55 #define EXCP_KERNEL_TRAP 9 /* Jumped to kernel code page. */ 56 #define EXCP_STREX 10 57 #define EXCP_SMC 11 /* secure monitor call */ 58 59 #define ARMV7M_EXCP_RESET 1 60 #define ARMV7M_EXCP_NMI 2 61 #define ARMV7M_EXCP_HARD 3 62 #define ARMV7M_EXCP_MEM 4 63 #define ARMV7M_EXCP_BUS 5 64 #define ARMV7M_EXCP_USAGE 6 65 #define ARMV7M_EXCP_SVC 11 66 #define ARMV7M_EXCP_DEBUG 12 67 #define ARMV7M_EXCP_PENDSV 14 68 #define ARMV7M_EXCP_SYSTICK 15 69 70 /* ARM-specific interrupt pending bits. */ 71 #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 72 73 /* Meanings of the ARMCPU object's two inbound GPIO lines */ 74 #define ARM_CPU_IRQ 0 75 #define ARM_CPU_FIQ 1 76 77 typedef void ARMWriteCPFunc(void *opaque, int cp_info, 78 int srcreg, int operand, uint32_t value, 79 void *retaddr); 80 typedef uint32_t ARMReadCPFunc(void *opaque, int cp_info, 81 int dstreg, int operand, 82 void *retaddr); 83 84 struct arm_boot_info; 85 86 #define NB_MMU_MODES 2 87 88 /* We currently assume float and double are IEEE single and double 89 precision respectively. 90 Doing runtime conversions is tricky because VFP registers may contain 91 integer values (eg. as the result of a FTOSI instruction). 92 s<2n> maps to the least significant half of d<n> 93 s<2n+1> maps to the most significant half of d<n> 94 */ 95 96 /* CPU state for each instance of a generic timer (in cp15 c14) */ 97 typedef struct ARMGenericTimer { 98 uint64_t cval; /* Timer CompareValue register */ 99 uint32_t ctl; /* Timer Control register */ 100 } ARMGenericTimer; 101 102 #define GTIMER_PHYS 0 103 #define GTIMER_VIRT 1 104 #define NUM_GTIMERS 2 105 106 /* Scale factor for generic timers, ie number of ns per tick. 107 * This gives a 62.5MHz timer. 108 */ 109 #define GTIMER_SCALE 16 110 111 typedef struct CPUARMState { 112 /* Regs for current mode. */ 113 uint32_t regs[16]; 114 /* Frequently accessed CPSR bits are stored separately for efficiently. 115 This contains all the other bits. Use cpsr_{read,write} to access 116 the whole CPSR. */ 117 uint32_t uncached_cpsr; 118 uint32_t spsr; 119 120 /* Banked registers. */ 121 uint32_t banked_spsr[7]; 122 uint32_t banked_r13[7]; 123 uint32_t banked_r14[7]; 124 125 /* These hold r8-r12. */ 126 uint32_t usr_regs[5]; 127 uint32_t fiq_regs[5]; 128 129 /* cpsr flag cache for faster execution */ 130 uint32_t CF; /* 0 or 1 */ 131 uint32_t VF; /* V is the bit 31. All other bits are undefined */ 132 uint32_t NF; /* N is bit 31. All other bits are undefined. */ 133 uint32_t ZF; /* Z set if zero. */ 134 uint32_t QF; /* 0 or 1 */ 135 uint32_t GE; /* cpsr[19:16] */ 136 uint32_t thumb; /* cpsr[5]. 0 = arm mode, 1 = thumb mode. */ 137 uint32_t condexec_bits; /* IT bits. cpsr[15:10,26:25]. */ 138 139 /* System control coprocessor (cp15) */ 140 struct { 141 uint32_t c0_cpuid; 142 uint32_t c0_cachetype; 143 uint32_t c0_ccsid[16]; /* Cache size. */ 144 uint32_t c0_clid; /* Cache level. */ 145 uint32_t c0_cssel; /* Cache size selection. */ 146 uint32_t c0_c1[8]; /* Feature registers. */ 147 uint32_t c0_c2[8]; /* Instruction set registers. */ 148 uint32_t c1_sys; /* System control register. */ 149 uint32_t c1_coproc; /* Coprocessor access register. */ 150 uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ 151 uint32_t c1_secfg; /* Secure configuration register. */ 152 uint32_t c1_sedbg; /* Secure debug enable register. */ 153 uint32_t c1_nseac; /* Non-secure access control register. */ 154 uint32_t c2_base0; /* MMU translation table base 0. */ 155 uint32_t c2_base1; /* MMU translation table base 1. */ 156 uint32_t c2_control; /* MMU translation table base control. */ 157 uint32_t c2_mask; /* MMU translation table base selection mask. */ 158 uint32_t c2_base_mask; /* MMU translation table base 0 mask. */ 159 uint32_t c2_data; /* MPU data cachable bits. */ 160 uint32_t c2_insn; /* MPU instruction cachable bits. */ 161 uint32_t c3; /* MMU domain access control register 162 MPU write buffer control. */ 163 uint32_t c5_insn; /* Fault status registers. */ 164 uint32_t c5_data; 165 uint32_t c6_region[8]; /* MPU base/size registers. */ 166 uint32_t c6_insn; /* Fault address registers. */ 167 uint32_t c6_data; 168 uint32_t c7_par; /* Translation result. */ 169 uint32_t c9_insn; /* Cache lockdown registers. */ 170 uint32_t c9_data; 171 uint32_t c9_pmcr; /* performance monitor control register */ 172 uint32_t c9_pmcnten; /* perf monitor counter enables */ 173 uint32_t c9_pmovsr; /* perf monitor overflow status */ 174 uint32_t c9_pmxevtyper; /* perf monitor event type */ 175 uint32_t c9_pmuserenr; /* perf monitor user enable */ 176 uint32_t c9_pminten; /* perf monitor interrupt enables */ 177 uint32_t c12_vbar; /* secure/nonsecure vector base address register. */ 178 uint32_t c12_mvbar; /* monitor vector base address register. */ 179 uint32_t c13_fcse; /* FCSE PID. */ 180 uint32_t c13_context; /* Context ID. */ 181 uint32_t c13_tls1; /* User RW Thread register. */ 182 uint32_t c13_tls2; /* User RO Thread register. */ 183 uint32_t c13_tls3; /* Privileged Thread register. */ 184 uint32_t c15_cpar; /* XScale Coprocessor Access Register */ 185 uint32_t c15_ticonfig; /* TI925T configuration byte. */ 186 uint32_t c15_i_max; /* Maximum D-cache dirty line index. */ 187 uint32_t c15_i_min; /* Minimum D-cache dirty line index. */ 188 uint32_t c15_threadid; /* TI debugger thread-ID. */ 189 } cp15; 190 191 struct { 192 uint32_t other_sp; 193 uint32_t vecbase; 194 uint32_t basepri; 195 uint32_t control; 196 int current_sp; 197 int exception; 198 int pending_exception; 199 } v7m; 200 201 /* Minimal set of debug coprocessor state (cp14) */ 202 uint32_t cp14_dbgdidr; 203 204 /* Thumb-2 EE state. */ 205 uint32_t teecr; 206 uint32_t teehbr; 207 208 /* Internal CPU feature flags. */ 209 uint32_t features; 210 211 /* VFP coprocessor state. */ 212 struct { 213 float64 regs[32]; 214 215 uint32_t xregs[16]; 216 /* We store these fpcsr fields separately for convenience. */ 217 int vec_len; 218 int vec_stride; 219 220 /* scratch space when Tn are not sufficient. */ 221 uint32_t scratch[8]; 222 223 /* fp_status is the "normal" fp status. standard_fp_status retains 224 * values corresponding to the ARM "Standard FPSCR Value", ie 225 * default-NaN, flush-to-zero, round-to-nearest and is used by 226 * any operations (generally Neon) which the architecture defines 227 * as controlled by the standard FPSCR value rather than the FPSCR. 228 * 229 * To avoid having to transfer exception bits around, we simply 230 * say that the FPSCR cumulative exception flags are the logical 231 * OR of the flags in the two fp statuses. This relies on the 232 * only thing which needs to read the exception flags being 233 * an explicit FPSCR read. 234 */ 235 float_status fp_status; 236 float_status standard_fp_status; 237 } vfp; 238 uint32_t exclusive_addr; 239 uint32_t exclusive_val; 240 uint32_t exclusive_high; 241 #if defined(CONFIG_USER_ONLY) 242 uint32_t exclusive_test; 243 uint32_t exclusive_info; 244 #endif 245 246 /* iwMMXt coprocessor state. */ 247 struct { 248 uint64_t regs[16]; 249 uint64_t val; 250 251 uint32_t cregs[16]; 252 } iwmmxt; 253 254 #if defined(CONFIG_USER_ONLY) 255 /* For usermode syscall translation. */ 256 int eabi; 257 #endif 258 259 CPU_COMMON 260 261 /* These fields after the common ones so they are preserved on reset. */ 262 263 /* Coprocessor IO used by peripherals */ 264 struct { 265 ARMReadCPFunc *cp_read; 266 ARMWriteCPFunc *cp_write; 267 void *opaque; 268 } cp[15]; 269 void *nvic; 270 const struct arm_boot_info *boot_info; 271 } CPUARMState; 272 273 #include "cpu-qom.h" 274 275 CPUARMState *cpu_arm_init(const char *cpu_model); 276 void arm_translate_init(void); 277 int cpu_arm_exec(CPUARMState *s); 278 void cpu_arm_close(CPUARMState *s); 279 void do_interrupt(CPUARMState *); 280 void switch_mode(CPUARMState *, int); 281 uint32_t do_arm_semihosting(CPUARMState *env); 282 283 static inline bool is_a64(CPUARMState *env) 284 { 285 #ifdef CONFIG_ANDROID // TODO(digit) 286 return 0; 287 #else 288 return env->aarch64; 289 #endif 290 } 291 292 #define PSTATE_N_SHIFT 3 293 #define PSTATE_N (1 << PSTATE_N_SHIFT) 294 #define PSTATE_Z_SHIFT 2 295 #define PSTATE_Z (1 << PSTATE_Z_SHIFT) 296 #define PSTATE_C_SHIFT 1 297 #define PSTATE_C (1 << PSTATE_C_SHIFT) 298 #define PSTATE_V_SHIFT 0 299 #define PSTATE_V (1 << PSTATE_V_SHIFT) 300 301 /* you can call this signal handler from your SIGBUS and SIGSEGV 302 signal handlers to inform the virtual CPU of exceptions. non zero 303 is returned if the signal was handled by the virtual CPU. */ 304 int cpu_arm_signal_handler(int host_signum, void *pinfo, 305 void *puc); 306 int cpu_arm_handle_mmu_fault (CPUARMState *env, target_ulong address, int rw, 307 int mmu_idx); 308 #define cpu_handle_mmu_fault cpu_arm_handle_mmu_fault 309 310 static inline void cpu_set_tls(CPUARMState *env, target_ulong newtls) 311 { 312 env->cp15.c13_tls2 = newtls; 313 } 314 315 #define CPSR_M (0x1fU) 316 #define CPSR_T (1U << 5) 317 #define CPSR_F (1U << 6) 318 #define CPSR_I (1U << 7) 319 #define CPSR_A (1U << 8) 320 #define CPSR_E (1U << 9) 321 #define CPSR_IT_2_7 (0xfc00U) 322 #define CPSR_GE (0xfU << 16) 323 #define CPSR_RESERVED (0xfU << 20) 324 #define CPSR_J (1U << 24) 325 #define CPSR_IT_0_1 (3U << 25) 326 #define CPSR_Q (1U << 27) 327 #define CPSR_V (1U << 28) 328 #define CPSR_C (1U << 29) 329 #define CPSR_Z (1U << 30) 330 #define CPSR_N (1U << 31) 331 #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) 332 333 #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) 334 #define CACHED_CPSR_BITS (CPSR_T | CPSR_GE | CPSR_IT | CPSR_Q | CPSR_NZCV) 335 /* Bits writable in user mode. */ 336 #define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE) 337 /* Execution state bits. MRS read as zero, MSR writes ignored. */ 338 #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J) 339 340 /* Return the current CPSR value. */ 341 uint32_t cpsr_read(CPUARMState *env); 342 /* Set the CPSR. Note that some bits of mask must be all-set or all-clear. */ 343 void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask); 344 345 /* Return the current xPSR value. */ 346 static inline uint32_t xpsr_read(CPUARMState *env) 347 { 348 int ZF; 349 ZF = (env->ZF == 0); 350 return (env->NF & 0x80000000) | (ZF << 30) 351 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) 352 | (env->thumb << 24) | ((env->condexec_bits & 3) << 25) 353 | ((env->condexec_bits & 0xfc) << 8) 354 | env->v7m.exception; 355 } 356 357 /* Set the xPSR. Note that some bits of mask must be all-set or all-clear. */ 358 static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) 359 { 360 if (mask & CPSR_NZCV) { 361 env->ZF = (~val) & CPSR_Z; 362 env->NF = val; 363 env->CF = (val >> 29) & 1; 364 env->VF = (val << 3) & 0x80000000; 365 } 366 if (mask & CPSR_Q) 367 env->QF = ((val & CPSR_Q) != 0); 368 if (mask & (1 << 24)) 369 env->thumb = ((val & (1 << 24)) != 0); 370 if (mask & CPSR_IT_0_1) { 371 env->condexec_bits &= ~3; 372 env->condexec_bits |= (val >> 25) & 3; 373 } 374 if (mask & CPSR_IT_2_7) { 375 env->condexec_bits &= 3; 376 env->condexec_bits |= (val >> 8) & 0xfc; 377 } 378 if (mask & 0x1ff) { 379 env->v7m.exception = val & 0x1ff; 380 } 381 } 382 383 /* Return the current FPSCR value. */ 384 uint32_t vfp_get_fpscr(CPUARMState *env); 385 void vfp_set_fpscr(CPUARMState *env, uint32_t val); 386 387 enum arm_cpu_mode { 388 ARM_CPU_MODE_USR = 0x10, 389 ARM_CPU_MODE_FIQ = 0x11, 390 ARM_CPU_MODE_IRQ = 0x12, 391 ARM_CPU_MODE_SVC = 0x13, 392 ARM_CPU_MODE_SMC = 0x16, 393 ARM_CPU_MODE_ABT = 0x17, 394 ARM_CPU_MODE_UND = 0x1b, 395 ARM_CPU_MODE_SYS = 0x1f 396 }; 397 398 /* VFP system registers. */ 399 #define ARM_VFP_FPSID 0 400 #define ARM_VFP_FPSCR 1 401 #define ARM_VFP_MVFR1 6 402 #define ARM_VFP_MVFR0 7 403 #define ARM_VFP_FPEXC 8 404 #define ARM_VFP_FPINST 9 405 #define ARM_VFP_FPINST2 10 406 407 /* iwMMXt coprocessor control registers. */ 408 #define ARM_IWMMXT_wCID 0 409 #define ARM_IWMMXT_wCon 1 410 #define ARM_IWMMXT_wCSSF 2 411 #define ARM_IWMMXT_wCASF 3 412 #define ARM_IWMMXT_wCGR0 8 413 #define ARM_IWMMXT_wCGR1 9 414 #define ARM_IWMMXT_wCGR2 10 415 #define ARM_IWMMXT_wCGR3 11 416 417 /* If adding a feature bit which corresponds to a Linux ELF 418 * HWCAP bit, remember to update the feature-bit-to-hwcap 419 * mapping in linux-user/elfload.c:get_elf_hwcap(). 420 */ 421 enum arm_features { 422 ARM_FEATURE_VFP, 423 ARM_FEATURE_AUXCR, /* ARM1026 Auxiliary control register. */ 424 ARM_FEATURE_XSCALE, /* Intel XScale extensions. */ 425 ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension. */ 426 ARM_FEATURE_V6, 427 ARM_FEATURE_V6K, 428 ARM_FEATURE_V7, 429 ARM_FEATURE_THUMB2, 430 ARM_FEATURE_MPU, /* Only has Memory Protection Unit, not full MMU. */ 431 ARM_FEATURE_VFP3, 432 ARM_FEATURE_VFP_FP16, 433 ARM_FEATURE_NEON, 434 ARM_FEATURE_DIV, 435 ARM_FEATURE_M, /* Microcontroller profile. */ 436 ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */ 437 ARM_FEATURE_THUMB2EE, 438 ARM_FEATURE_V7MP, /* v7 Multiprocessing Extensions */ 439 ARM_FEATURE_V4T, 440 ARM_FEATURE_V5, 441 ARM_FEATURE_STRONGARM, 442 ARM_FEATURE_VAPA, /* cp15 VA to PA lookups */ 443 ARM_FEATURE_TRUSTZONE, /* TrustZone Security Extensions. */ 444 }; 445 446 static inline int arm_feature(CPUARMState *env, int feature) 447 { 448 return (env->features & (1ULL << feature)) != 0; 449 } 450 451 void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf); 452 453 /* Interface between CPU and Interrupt controller. */ 454 void armv7m_nvic_set_pending(void *opaque, int irq); 455 int armv7m_nvic_acknowledge_irq(void *opaque); 456 void armv7m_nvic_complete_irq(void *opaque, int irq); 457 458 /* Interface for defining coprocessor registers. 459 * Registers are defined in tables of arm_cp_reginfo structs 460 * which are passed to define_arm_cp_regs(). 461 */ 462 463 /* When looking up a coprocessor register we look for it 464 * via an integer which encodes all of: 465 * coprocessor number 466 * Crn, Crm, opc1, opc2 fields 467 * 32 or 64 bit register (ie is it accessed via MRC/MCR 468 * or via MRRC/MCRR?) 469 * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. 470 * (In this case crn and opc2 should be zero.) 471 */ 472 #define ENCODE_CP_REG(cp, is64, crn, crm, opc1, opc2) \ 473 (((cp) << 16) | ((is64) << 15) | ((crn) << 11) | \ 474 ((crm) << 7) | ((opc1) << 3) | (opc2)) 475 476 /* Convert a full 64 bit KVM register ID to the truncated 32 bit 477 * version used as a key for the coprocessor register hashtable 478 */ 479 static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) 480 { 481 uint32_t cpregid = kvmid; 482 if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { 483 cpregid |= (1 << 15); 484 } 485 return cpregid; 486 } 487 488 /* Convert a truncated 32 bit hashtable key into the full 489 * 64 bit KVM register ID. 490 */ 491 static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) 492 { 493 uint64_t kvmid = cpregid & ~(1 << 15); 494 if (cpregid & (1 << 15)) { 495 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; 496 } else { 497 kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; 498 } 499 return kvmid; 500 } 501 502 /* ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a 503 * special-behaviour cp reg and bits [15..8] indicate what behaviour 504 * it has. Otherwise it is a simple cp reg, where CONST indicates that 505 * TCG can assume the value to be constant (ie load at translate time) 506 * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END 507 * indicates that the TB should not be ended after a write to this register 508 * (the default is that the TB ends after cp writes). OVERRIDE permits 509 * a register definition to override a previous definition for the 510 * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the 511 * old must have the OVERRIDE bit set. 512 * NO_MIGRATE indicates that this register should be ignored for migration; 513 * (eg because any state is accessed via some other coprocessor register). 514 * IO indicates that this register does I/O and therefore its accesses 515 * need to be surrounded by gen_io_start()/gen_io_end(). In particular, 516 * registers which implement clocks or timers require this. 517 */ 518 #define ARM_CP_SPECIAL 1 519 #define ARM_CP_CONST 2 520 #define ARM_CP_64BIT 4 521 #define ARM_CP_SUPPRESS_TB_END 8 522 #define ARM_CP_OVERRIDE 16 523 #define ARM_CP_NO_MIGRATE 32 524 #define ARM_CP_IO 64 525 #define ARM_CP_NOP (ARM_CP_SPECIAL | (1 << 8)) 526 #define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8)) 527 #define ARM_LAST_SPECIAL ARM_CP_WFI 528 /* Used only as a terminator for ARMCPRegInfo lists */ 529 #define ARM_CP_SENTINEL 0xffff 530 /* Mask of only the flag bits in a type field */ 531 #define ARM_CP_FLAG_MASK 0x7f 532 533 /* Return true if cptype is a valid type field. This is used to try to 534 * catch errors where the sentinel has been accidentally left off the end 535 * of a list of registers. 536 */ 537 static inline bool cptype_valid(int cptype) 538 { 539 return ((cptype & ~ARM_CP_FLAG_MASK) == 0) 540 || ((cptype & ARM_CP_SPECIAL) && 541 ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); 542 } 543 544 /* Access rights: 545 * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM 546 * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and 547 * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 548 * (ie any of the privileged modes in Secure state, or Monitor mode). 549 * If a register is accessible in one privilege level it's always accessible 550 * in higher privilege levels too. Since "Secure PL1" also follows this rule 551 * (ie anything visible in PL2 is visible in S-PL1, some things are only 552 * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the 553 * terminology a little and call this PL3. 554 * 555 * If access permissions for a register are more complex than can be 556 * described with these bits, then use a laxer set of restrictions, and 557 * do the more restrictive/complex check inside a helper function. 558 */ 559 #define PL3_R 0x80 560 #define PL3_W 0x40 561 #define PL2_R (0x20 | PL3_R) 562 #define PL2_W (0x10 | PL3_W) 563 #define PL1_R (0x08 | PL2_R) 564 #define PL1_W (0x04 | PL2_W) 565 #define PL0_R (0x02 | PL1_R) 566 #define PL0_W (0x01 | PL1_W) 567 568 #define PL3_RW (PL3_R | PL3_W) 569 #define PL2_RW (PL2_R | PL2_W) 570 #define PL1_RW (PL1_R | PL1_W) 571 #define PL0_RW (PL0_R | PL0_W) 572 573 static inline int arm_current_pl(CPUARMState *env) 574 { 575 if ((env->uncached_cpsr & 0x1f) == ARM_CPU_MODE_USR) { 576 return 0; 577 } 578 /* We don't currently implement the Virtualization or TrustZone 579 * extensions, so PL2 and PL3 don't exist for us. 580 */ 581 return 1; 582 } 583 584 typedef struct ARMCPRegInfo ARMCPRegInfo; 585 586 /* Access functions for coprocessor registers. These should return 587 * 0 on success, or one of the EXCP_* constants if access should cause 588 * an exception (in which case *value is not written). 589 */ 590 typedef int CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque, 591 uint64_t *value); 592 typedef int CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, 593 uint64_t value); 594 /* Hook function for register reset */ 595 typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); 596 597 #define CP_ANY 0xff 598 599 /* Definition of an ARM coprocessor register */ 600 struct ARMCPRegInfo { 601 /* Name of register (useful mainly for debugging, need not be unique) */ 602 const char *name; 603 /* Location of register: coprocessor number and (crn,crm,opc1,opc2) 604 * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a 605 * 'wildcard' field -- any value of that field in the MRC/MCR insn 606 * will be decoded to this register. The register read and write 607 * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 608 * used by the program, so it is possible to register a wildcard and 609 * then behave differently on read/write if necessary. 610 * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 611 * must both be zero. 612 */ 613 uint8_t cp; 614 uint8_t crn; 615 uint8_t crm; 616 uint8_t opc1; 617 uint8_t opc2; 618 /* Register type: ARM_CP_* bits/values */ 619 int type; 620 /* Access rights: PL*_[RW] */ 621 int access; 622 /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when 623 * this register was defined: can be used to hand data through to the 624 * register read/write functions, since they are passed the ARMCPRegInfo*. 625 */ 626 void *opaque; 627 /* Value of this register, if it is ARM_CP_CONST. Otherwise, if 628 * fieldoffset is non-zero, the reset value of the register. 629 */ 630 uint64_t resetvalue; 631 /* Offset of the field in CPUARMState for this register. This is not 632 * needed if either: 633 * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs 634 * 2. both readfn and writefn are specified 635 */ 636 ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ 637 /* Function for handling reads of this register. If NULL, then reads 638 * will be done by loading from the offset into CPUARMState specified 639 * by fieldoffset. 640 */ 641 CPReadFn *readfn; 642 /* Function for handling writes of this register. If NULL, then writes 643 * will be done by writing to the offset into CPUARMState specified 644 * by fieldoffset. 645 */ 646 CPWriteFn *writefn; 647 /* Function for doing a "raw" read; used when we need to copy 648 * coprocessor state to the kernel for KVM or out for 649 * migration. This only needs to be provided if there is also a 650 * readfn and it makes an access permission check. 651 */ 652 CPReadFn *raw_readfn; 653 /* Function for doing a "raw" write; used when we need to copy KVM 654 * kernel coprocessor state into userspace, or for inbound 655 * migration. This only needs to be provided if there is also a 656 * writefn and it makes an access permission check or masks out 657 * "unwritable" bits or has write-one-to-clear or similar behaviour. 658 */ 659 CPWriteFn *raw_writefn; 660 /* Function for resetting the register. If NULL, then reset will be done 661 * by writing resetvalue to the field specified in fieldoffset. If 662 * fieldoffset is 0 then no reset will be done. 663 */ 664 CPResetFn *resetfn; 665 }; 666 667 /* Macros which are lvalues for the field in CPUARMState for the 668 * ARMCPRegInfo *ri. 669 */ 670 #define CPREG_FIELD32(env, ri) \ 671 (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) 672 #define CPREG_FIELD64(env, ri) \ 673 (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) 674 675 #define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } 676 677 #ifndef CONFIG_ANDROID // TODO(digit): Implement ARMCPU 678 void define_arm_cp_regs_with_opaque(ARMCPU *cpu, 679 const ARMCPRegInfo *regs, void *opaque); 680 void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, 681 const ARMCPRegInfo *regs, void *opaque); 682 static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) 683 { 684 define_arm_cp_regs_with_opaque(cpu, regs, 0); 685 } 686 static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) 687 { 688 define_one_arm_cp_reg_with_opaque(cpu, regs, 0); 689 } 690 const ARMCPRegInfo *get_arm_cp_reginfo(ARMCPU *cpu, uint32_t encoded_cp); 691 #endif // !CONFIG_ANDROID 692 693 /* CPWriteFn that can be used to implement writes-ignored behaviour */ 694 int arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, 695 uint64_t value); 696 /* CPReadFn that can be used for read-as-zero behaviour */ 697 int arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value); 698 699 static inline bool cp_access_ok(CPUARMState *env, 700 const ARMCPRegInfo *ri, int isread) 701 { 702 return (ri->access >> ((arm_current_pl(env) * 2) + isread)) & 1; 703 } 704 705 #ifndef CONFIG_ANDROID // TODO(digit): Implement ARMCPU 706 /** 707 * write_list_to_cpustate 708 * @cpu: ARMCPU 709 * 710 * For each register listed in the ARMCPU cpreg_indexes list, write 711 * its value from the cpreg_values list into the ARMCPUARMState structure. 712 * This updates TCG's working data structures from KVM data or 713 * from incoming migration state. 714 * 715 * Returns: true if all register values were updated correctly, 716 * false if some register was unknown or could not be written. 717 * Note that we do not stop early on failure -- we will attempt 718 * writing all registers in the list. 719 */ 720 bool write_list_to_cpustate(ARMCPU *cpu); 721 722 /** 723 * write_cpustate_to_list: 724 * @cpu: ARMCPU 725 * 726 * For each register listed in the ARMCPU cpreg_indexes list, write 727 * its value from the ARMCPUARMState structure into the cpreg_values list. 728 * This is used to copy info from TCG's working data structures into 729 * KVM or for outbound migration. 730 * 731 * Returns: true if all register values were read correctly, 732 * false if some register was unknown or could not be read. 733 * Note that we do not stop early on failure -- we will attempt 734 * reading all registers in the list. 735 */ 736 bool write_cpustate_to_list(ARMCPU *cpu); 737 #endif // !CONFIG_ANDROID 738 739 void cpu_arm_set_cp_io(CPUARMState *env, int cpnum, 740 ARMReadCPFunc *cp_read, ARMWriteCPFunc *cp_write, 741 void *opaque); 742 743 /* Does the core conform to the the "MicroController" profile. e.g. Cortex-M3. 744 Note the M in older cores (eg. ARM7TDMI) stands for Multiply. These are 745 conventional cores (ie. Application or Realtime profile). */ 746 747 #define IS_M(env) arm_feature(env, ARM_FEATURE_M) 748 #define ARM_CPUID(env) (env->cp15.c0_cpuid) 749 750 #define ARM_CPUID_ARM1026 0x4106a262 751 #define ARM_CPUID_ARM926 0x41069265 752 #define ARM_CPUID_ARM946 0x41059461 753 #define ARM_CPUID_TI915T 0x54029152 754 #define ARM_CPUID_TI925T 0x54029252 755 #define ARM_CPUID_SA1100 0x4401A11B 756 #define ARM_CPUID_SA1110 0x6901B119 757 #define ARM_CPUID_PXA250 0x69052100 758 #define ARM_CPUID_PXA255 0x69052d00 759 #define ARM_CPUID_PXA260 0x69052903 760 #define ARM_CPUID_PXA261 0x69052d05 761 #define ARM_CPUID_PXA262 0x69052d06 762 #define ARM_CPUID_PXA270 0x69054110 763 #define ARM_CPUID_PXA270_A0 0x69054110 764 #define ARM_CPUID_PXA270_A1 0x69054111 765 #define ARM_CPUID_PXA270_B0 0x69054112 766 #define ARM_CPUID_PXA270_B1 0x69054113 767 #define ARM_CPUID_PXA270_C0 0x69054114 768 #define ARM_CPUID_PXA270_C5 0x69054117 769 #define ARM_CPUID_ARM1136 0x4117b363 770 #define ARM_CPUID_ARM1136_R2 0x4107b362 771 #define ARM_CPUID_ARM1176 0x410fb767 772 #define ARM_CPUID_ARM11MPCORE 0x410fb022 773 #define ARM_CPUID_CORTEXA8 0x410fc080 774 #define ARM_CPUID_CORTEXA8_R2 0x412fc083 775 #define ARM_CPUID_CORTEXA9 0x410fc090 776 #define ARM_CPUID_CORTEXM3 0x410fc231 777 #define ARM_CPUID_ANY 0xffffffff 778 779 #if defined(CONFIG_USER_ONLY) 780 #define TARGET_PAGE_BITS 12 781 #else 782 /* The ARM MMU allows 1k pages. */ 783 /* ??? Linux doesn't actually use these, and they're deprecated in recent 784 architecture revisions. Maybe a configure option to disable them. */ 785 #define TARGET_PAGE_BITS 10 786 #endif 787 788 #if defined(TARGET_AARCH64) 789 # define TARGET_PHYS_ADDR_SPACE_BITS 48 790 # define TARGET_VIRT_ADDR_SPACE_BITS 64 791 #else 792 # define TARGET_PHYS_ADDR_SPACE_BITS 40 793 # define TARGET_VIRT_ADDR_SPACE_BITS 32 794 #endif 795 796 #define cpu_init cpu_arm_init 797 #define cpu_exec cpu_arm_exec 798 #define cpu_gen_code cpu_arm_gen_code 799 #define cpu_signal_handler cpu_arm_signal_handler 800 #define cpu_list arm_cpu_list 801 802 #define CPU_SAVE_VERSION 4 803 804 /* MMU modes definitions */ 805 #define MMU_MODE0_SUFFIX _kernel 806 #define MMU_MODE1_SUFFIX _user 807 #define MMU_USER_IDX 1 808 static inline int cpu_mmu_index (CPUARMState *env) 809 { 810 return (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR ? 1 : 0; 811 } 812 813 static inline int is_cpu_user (CPUARMState *env) 814 { 815 #ifdef CONFIG_USER_ONLY 816 return 1; 817 #else 818 return (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR; 819 #endif // CONFIG_USER_ONLY 820 } 821 822 #if defined(CONFIG_USER_ONLY) 823 static inline void cpu_clone_regs(CPUARMState *env, target_ulong newsp) 824 { 825 if (newsp) 826 env->regs[13] = newsp; 827 env->regs[0] = 0; 828 } 829 #endif 830 831 #include "exec/cpu-all.h" 832 833 /* Bit usage in the TB flags field: bit 31 indicates whether we are 834 * in 32 or 64 bit mode. The meaning of the other bits depends on that. 835 */ 836 #define ARM_TBFLAG_AARCH64_STATE_SHIFT 31 837 #define ARM_TBFLAG_AARCH64_STATE_MASK (1U << ARM_TBFLAG_AARCH64_STATE_SHIFT) 838 839 /* Bit usage when in AArch32 state: */ 840 #define ARM_TBFLAG_THUMB_SHIFT 0 841 #define ARM_TBFLAG_THUMB_MASK (1 << ARM_TBFLAG_THUMB_SHIFT) 842 #define ARM_TBFLAG_VECLEN_SHIFT 1 843 #define ARM_TBFLAG_VECLEN_MASK (0x7 << ARM_TBFLAG_VECLEN_SHIFT) 844 #define ARM_TBFLAG_VECSTRIDE_SHIFT 4 845 #define ARM_TBFLAG_VECSTRIDE_MASK (0x3 << ARM_TBFLAG_VECSTRIDE_SHIFT) 846 #define ARM_TBFLAG_PRIV_SHIFT 6 847 #define ARM_TBFLAG_PRIV_MASK (1 << ARM_TBFLAG_PRIV_SHIFT) 848 #define ARM_TBFLAG_VFPEN_SHIFT 7 849 #define ARM_TBFLAG_VFPEN_MASK (1 << ARM_TBFLAG_VFPEN_SHIFT) 850 #define ARM_TBFLAG_CONDEXEC_SHIFT 8 851 #define ARM_TBFLAG_CONDEXEC_MASK (0xff << ARM_TBFLAG_CONDEXEC_SHIFT) 852 #define ARM_TBFLAG_BSWAP_CODE_SHIFT 16 853 #define ARM_TBFLAG_BSWAP_CODE_MASK (1 << ARM_TBFLAG_BSWAP_CODE_SHIFT) 854 855 /* Bit usage when in AArch64 state: currently no bits defined */ 856 857 /* some convenience accessor macros */ 858 #define ARM_TBFLAG_AARCH64_STATE(F) \ 859 (((F) & ARM_TBFLAG_AARCH64_STATE_MASK) >> ARM_TBFLAG_AARCH64_STATE_SHIFT) 860 #define ARM_TBFLAG_THUMB(F) \ 861 (((F) & ARM_TBFLAG_THUMB_MASK) >> ARM_TBFLAG_THUMB_SHIFT) 862 #define ARM_TBFLAG_VECLEN(F) \ 863 (((F) & ARM_TBFLAG_VECLEN_MASK) >> ARM_TBFLAG_VECLEN_SHIFT) 864 #define ARM_TBFLAG_VECSTRIDE(F) \ 865 (((F) & ARM_TBFLAG_VECSTRIDE_MASK) >> ARM_TBFLAG_VECSTRIDE_SHIFT) 866 #define ARM_TBFLAG_PRIV(F) \ 867 (((F) & ARM_TBFLAG_PRIV_MASK) >> ARM_TBFLAG_PRIV_SHIFT) 868 #define ARM_TBFLAG_VFPEN(F) \ 869 (((F) & ARM_TBFLAG_VFPEN_MASK) >> ARM_TBFLAG_VFPEN_SHIFT) 870 #define ARM_TBFLAG_CONDEXEC(F) \ 871 (((F) & ARM_TBFLAG_CONDEXEC_MASK) >> ARM_TBFLAG_CONDEXEC_SHIFT) 872 #define ARM_TBFLAG_BSWAP_CODE(F) \ 873 (((F) & ARM_TBFLAG_BSWAP_CODE_MASK) >> ARM_TBFLAG_BSWAP_CODE_SHIFT) 874 875 static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, 876 target_ulong *cs_base, int *flags) 877 { 878 if (is_a64(env)) { 879 *pc = env->regs[15]; 880 *flags = ARM_TBFLAG_AARCH64_STATE_MASK; 881 } else { 882 int privmode; 883 *pc = env->regs[15]; 884 *flags = (env->thumb << ARM_TBFLAG_THUMB_SHIFT) 885 | (env->vfp.vec_len << ARM_TBFLAG_VECLEN_SHIFT) 886 | (env->vfp.vec_stride << ARM_TBFLAG_VECSTRIDE_SHIFT) 887 | (env->condexec_bits << ARM_TBFLAG_CONDEXEC_SHIFT); 888 // | (env->bswap_code << ARM_TBFLAG_BSWAP_CODE_SHIFT); 889 if (arm_feature(env, ARM_FEATURE_M)) { 890 privmode = !((env->v7m.exception == 0) && (env->v7m.control & 1)); 891 } else { 892 privmode = (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR; 893 } 894 if (privmode) { 895 *flags |= ARM_TBFLAG_PRIV_MASK; 896 } 897 if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) { 898 *flags |= ARM_TBFLAG_VFPEN_MASK; 899 } 900 } 901 902 *cs_base = 0; 903 } 904 905 static inline bool cpu_has_work(CPUState *cpu) 906 { 907 return (cpu->interrupt_request & 908 (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD | CPU_INTERRUPT_EXITTB)); 909 } 910 911 #include "exec/exec-all.h" 912 913 static inline void cpu_pc_from_tb(CPUARMState *env, TranslationBlock *tb) 914 { 915 env->regs[15] = tb->pc; 916 } 917 918 #endif 919
