| /prebuilts/ndk/9/platforms/android-4/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-5/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-8/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-9/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-9/arch-mips/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-9/arch-x86/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/sources/cxx-stl/gnu-libstdc++/4.6/include/ |
| typeinfo | 64 // can override the defaults by defining __GXX_TYPEINFO_EQUALITY_INLINE to
|
| /prebuilts/ndk/9/sources/cxx-stl/gnu-libstdc++/4.7/include/ |
| typeinfo | 63 // can override the defaults by defining __GXX_TYPEINFO_EQUALITY_INLINE to
|
| /prebuilts/ndk/9/sources/cxx-stl/gnu-libstdc++/4.8/include/ |
| fstream | 57 * @tparam _Traits Traits for character type, defaults to
418 * @tparam _Traits Traits for character type, defaults to
590 * @tparam _Traits Traits for character type, defaults to
767 * @tparam _Traits Traits for character type, defaults to
|
| typeinfo | 61 // can override the defaults by defining __GXX_TYPEINFO_EQUALITY_INLINE to
|
| /prebuilts/ndk/9/sources/cxx-stl/gnu-libstdc++/4.9/include/ |
| fstream | 57 * @tparam _Traits Traits for character type, defaults to
421 * @tparam _Traits Traits for character type, defaults to
593 * @tparam _Traits Traits for character type, defaults to
770 * @tparam _Traits Traits for character type, defaults to
|
| typeinfo | 61 // can override the defaults by defining __GXX_TYPEINFO_EQUALITY_INLINE to
|
| /prebuilts/python/darwin-x86/2.7.5/lib/python2.7/ |
| audiodev.py | 189 # XXX Hack, hack -- leave defaults
|
| compileall.py | 165 print " defaults to the equivalent of -l sys.path"
|
| /prebuilts/python/darwin-x86/2.7.5/lib/python2.7/distutils/ |
| spawn.py | 180 A string listing directories separated by 'os.pathsep'; defaults to
|
| /prebuilts/python/darwin-x86/2.7.5/lib/python2.7/lib-tk/ |
| tkFont.py | 31 name -- name to use for this font configuration (defaults to a unique name)
|
| /prebuilts/python/darwin-x86/2.7.5/lib/python2.7/lib2to3/pgen2/ |
| parse.py | 95 defaults to the grammar's start symbol.
|
| /prebuilts/python/darwin-x86/2.7.5/lib/python2.7/plat-mac/lib-scriptpackages/Netscape/ |
| Mozilla_suite.py | 207 Keyword argument with_index: Index to the help file. Defaults to \xd4DEFAULT\xd5)
|
| /prebuilts/python/darwin-x86/2.7.5/lib/python2.7/test/ |
| test_hmac.py | 254 # Testing if HMAC defaults to MD5 algorithm.
|
| /prebuilts/python/linux-x86/2.7.5/lib/python2.7/ |
| audiodev.py | 189 # XXX Hack, hack -- leave defaults
|
| compileall.py | 165 print " defaults to the equivalent of -l sys.path"
|
| /prebuilts/python/linux-x86/2.7.5/lib/python2.7/distutils/ |
| spawn.py | 180 A string listing directories separated by 'os.pathsep'; defaults to
|
| /prebuilts/python/linux-x86/2.7.5/lib/python2.7/lib-tk/ |
| tkFont.py | 31 name -- name to use for this font configuration (defaults to a unique name)
|
| /prebuilts/python/linux-x86/2.7.5/lib/python2.7/lib2to3/pgen2/ |
| parse.py | 95 defaults to the grammar's start symbol.
|
| /prebuilts/python/linux-x86/2.7.5/lib/python2.7/test/ |
| test_hmac.py | 254 # Testing if HMAC defaults to MD5 algorithm.
|
