Lines Matching refs:explicitly
6 'attribute-access': '\nCustomizing attribute access\n****************************\n\nThe following methods can be defined to customize the meaning of\nattribute access (use of, assignment to, or deletion of ``x.name``)\nfor class instances.\n\nobject.__getattr__(self, name)\n\n Called when an attribute lookup has not found the attribute in the\n usual places (i.e. it is not an instance attribute nor is it found\n in the class tree for ``self``). ``name`` is the attribute name.\n This method should return the (computed) attribute value or raise\n an ``AttributeError`` exception.\n\n Note that if the attribute is found through the normal mechanism,\n ``__getattr__()`` is not called. (This is an intentional asymmetry\n between ``__getattr__()`` and ``__setattr__()``.) This is done both\n for efficiency reasons and because otherwise ``__getattr__()``\n would have no way to access other attributes of the instance. Note\n that at least for instance variables, you can fake total control by\n not inserting any values in the instance attribute dictionary (but\n instead inserting them in another object). See the\n ``__getattribute__()`` method below for a way to actually get total\n control in new-style classes.\n\nobject.__setattr__(self, name, value)\n\n Called when an attribute assignment is attempted. This is called\n instead of the normal mechanism (i.e. store the value in the\n instance dictionary). *name* is the attribute name, *value* is the\n value to be assigned to it.\n\n If ``__setattr__()`` wants to assign to an instance attribute, it\n should not simply execute ``self.name = value`` --- this would\n cause a recursive call to itself. Instead, it should insert the\n value in the dictionary of instance attributes, e.g.,\n ``self.__dict__[name] = value``. For new-style classes, rather\n than accessing the instance dictionary, it should call the base\n class method with the same name, for example,\n ``object.__setattr__(self, name, value)``.\n\nobject.__delattr__(self, name)\n\n Like ``__setattr__()`` but for attribute deletion instead of\n assignment. This should only be implemented if ``del obj.name`` is\n meaningful for the object.\n\n\nMore attribute access for new-style classes\n===========================================\n\nThe following methods only apply to new-style classes.\n\nobject.__getattribute__(self, name)\n\n Called unconditionally to implement attribute accesses for\n instances of the class. If the class also defines\n ``__getattr__()``, the latter will not be called unless\n ``__getattribute__()`` either calls it explicitly
13 'bltin-null-object': "\nThe Null Object\n***************\n\nThis object is returned by functions that don't explicitly return a\nvalue. It supports no special operations. There is exactly one null\nobject, named ``None`` (a built-in name).\n\nIt is written as ``None``.\n",
21 function modifies the object (e.g. by appending an item to a\nlist), the default value is in effect modified. This is generally not\nwhat was intended. A way around this is to use ``None`` as the\ndefault, and explicitly
25 'customization': '\nBasic customization\n*******************\n\nobject.__new__(cls[, ...])\n\n Called to create a new instance of class *cls*. ``__new__()`` is a\n static method (special-cased so you need not declare it as such)\n that takes the class of which an instance was requested as its\n first argument. The remaining arguments are those passed to the\n object constructor expression (the call to the class). The return\n value of ``__new__()`` should be the new object instance (usually\n an instance of *cls*).\n\n Typical implementations create a new instance of the class by\n invoking the superclass\'s ``__new__()`` method using\n ``super(currentclass, cls).__new__(cls[, ...])`` with appropriate\n arguments and then modifying the newly-created instance as\n necessary before returning it.\n\n If ``__new__()`` returns an instance of *cls*, then the new\n instance\'s ``__init__()`` method will be invoked like\n ``__init__(self[, ...])``, where *self* is the new instance and the\n remaining arguments are the same as were passed to ``__new__()``.\n\n If ``__new__()`` does not return an instance of *cls*, then the new\n instance\'s ``__init__()`` method will not be invoked.\n\n ``__new__()`` is intended mainly to allow subclasses of immutable\n types (like int, str, or tuple) to customize instance creation. It\n is also commonly overridden in custom metaclasses in order to\n customize class creation.\n\nobject.__init__(self[, ...])\n\n Called when the instance is created. The arguments are those\n passed to the class constructor expression. If a base class has an\n ``__init__()`` method, the derived class\'s ``__init__()`` method,\n if any, must explicitly call it to ensure proper initialization of\n the base class part of the instance; for example:\n ``BaseClass.__init__(self, [args...])``. As a special constraint\n on constructors, no value may be returned; doing so will cause a\n ``TypeError`` to be raised at runtime.\n\nobject.__del__(self)\n\n Called when the instance is about to be destroyed. This is also\n called a destructor. If a base class has a ``__del__()`` method,\n the derived class\'s ``__del__()`` method, if any, must explicitly\n call it to ensure proper deletion of the base class part of the\n instance. Note that it is possible (though not recommended!) for\n the ``__del__()`` method to postpone destruction of the instance by\n creating a new reference to it. It may then be called at a later\n time when this new reference is deleted. It is not guaranteed that\n ``__del__()`` methods are called for objects that still exist when\n the interpreter exits.\n\n Note: ``del x`` doesn\'t directly call ``x.__del__()`` --- the former\n decrements the reference count for ``x`` by one, and the latter\n is only called when ``x``\'s reference count reaches zero. Some\n common situations that may prevent the reference count of an\n object from going to zero include: circular references between\n objects (e.g., a doubly-linked list or a tree data structure with\n parent and child pointers); a reference to the object on the\n stack frame of a function that caught an exception (the traceback\n stored in ``sys.exc_traceback`` keeps the stack frame alive); or\n a reference to the object on the stack frame that raised an\n unhandled exception in interactive mode (the traceback stored in\n ``sys.last_traceback`` keeps the stack frame alive). The first\n situation can only be remedied by explicitlyexplicitly flag themselves as being\n unhashable by setting ``__hash__ = None`` in the class definition.\n Doing so means that not only will instances of the class raise an\n appropriate ``TypeError`` when a program attempts to retrieve their\n hash value, but they will also be correctly identified as\n unhashable when checking ``isinstance(obj, collections.Hashable)``\n (unlike classes which define their own ``__hash__()`` to explicitly\n raise ``TypeError``).\n\n Changed in version 2.5: ``__hash__()`` may now also return a long\n integer object; the 32-bit integer is then derived from the hash of\n that object.\n\n Changed in version 2.6: ``__hash__`` may now be set to ``None`` to\n explicitly flag instances of a class as unhashable.\n\nobject.__nonzero__(self)\n\n Called to implement truth value testing and the built-in operation\n ``bool()``; should return ``False`` or ``True``, or their integer\n equivalents ``0`` or ``1``. When this method is not defined,\n ``__len__()`` is called, if it is defined, and the object is\n considered true if its result is nonzero. If a class defines\n neither ``__len__()`` nor ``__nonzero__()``, all its instances are\n considered true.\n\nobject.__unicode__(self)\n\n Called to implement ``unicode()`` built-in; should return a Unicode\n object. When this method is not defined, string conversion is\n attempted, and the result of string conversion is converted to\n Unicode using the system default encoding.\n',
29 'dynamic-features': '\nInteraction with dynamic features\n*********************************\n\nThere are several cases where Python statements are illegal when used\nin conjunction with nested scopes that contain free variables.\n\nIf a variable is referenced in an enclosing scope, it is illegal to\ndelete the name. An error will be reported at compile time.\n\nIf the wild card form of import --- ``import *`` --- is used in a\nfunction and the function contains or is a nested block with free\nvariables, the compiler will raise a ``SyntaxError``.\n\nIf ``exec`` is used in a function and the function contains or is a\nnested block with free variables, the compiler will raise a\n``SyntaxError`` unless the exec explicitly specifies the local\nnamespace for the ``exec``. (In other words, ``exec obj`` would be\nillegal, but ``exec obj in ns`` would be legal.)\n\nThe ``eval()``, ``execfile()``, and ``input()`` functions and the\n``exec`` statement do not have access to the full environment for\nresolving names. Names may be resolved in the local and global\nnamespaces of the caller. Free variables are not resolved in the\nnearest enclosing namespace, but in the global namespace. [1] The\n``exec`` statement and the ``eval()`` and ``execfile()`` functions\nhave optional arguments to override the global and local namespace.\nIf only one namespace is specified, it is used for both.\n',
32 explicitly specifies the local\nnamespace for the ``exec``. (In other words, ``exec obj`` would be\nillegal, but ``exec obj in ns`` would be legal.)\n\nThe ``eval()``, ``execfile()``, and ``input()`` functions and the\n``exec`` statement do not have access to the full environment for\nresolving names. Names may be resolved in the local and global\nnamespaces of the caller. Free variables are not resolved in the\nnearest enclosing namespace, but in the global namespace. [1] The\n``exec`` statement and the ``eval()`` and ``execfile()`` functions\nhave optional arguments to override the global and local namespace.\nIf only one namespace is specified, it is used for both.\n\n\nExceptions\n==========\n\nExceptions are a means of breaking out of the normal flow of control\nof a code block in order to handle errors or other exceptional\nconditions. An exception is *raised* at the point where the error is\ndetected; it may be *handled* by the surrounding code block or by any\ncode block that directly or indirectly invoked the code block where\nthe error occurred.\n\nThe Python interpreter raises an exception when it detects a run-time\nerror (such as division by zero). A Python program can also\nexplicitly raise an exception with the ``raise`` statement. Exception\nhandlers are specified with the ``try`` ... ``except`` statement. The\n``finally`` clause of such a statement can be used to specify cleanup\ncode which does not handle the exception, but is executed whether an\nexception occurred or not in the preceding code.\n\nPython uses the "termination" model of error handling: an exception\nhandler can find out what happened and continue execution at an outer\nlevel, but it cannot repair the cause of the error and retry the\nfailing operation (except by re-entering the offending piece of code\nfrom the top).\n\nWhen an exception is not handled at all, the interpreter terminates\nexecution of the program, or returns to its interactive main loop. In\neither case, it prints a stack backtrace, except when the exception is\n``SystemExit``.\n\nExceptions are identified by class instances. The ``except`` clause\nis selected depending on the class of the instance: it must reference\nthe class of the instance or a base class thereof. The instance can\nbe received by the handler and can carry additional information about\nthe exceptional condition.\n\nExceptions can also be identified by strings, in which case the\n``except`` clause is selected by object identity. An arbitrary value\ncan be raised along with the identifying string which can be passed to\nthe handler.\n\nNote: Messages to exceptions are not part of the Python API. Their\n contents may change from one version of Python to the next without\n warning and should not be relied on by code which will run under\n multiple versions of the interpreter.\n\nSee also the description of the ``try`` statement in section *The try\nstatement* and ``raise`` statement in section *The raise statement*.\n\n-[ Footnotes ]-\n\n[1] This limitation occurs because the code that is executed by these\n operations is not available at the time the module is compiled.\n',
37 'function': '\nFunction definitions\n********************\n\nA function definition defines a user-defined function object (see\nsection *The standard type hierarchy*):\n\n decorated ::= decorators (classdef | funcdef)\n decorators ::= decorator+\n decorator ::= "@" dotted_name ["(" [argument_list [","]] ")"] NEWLINE\n funcdef ::= "def" funcname "(" [parameter_list] ")" ":" suite\n dotted_name ::= identifier ("." identifier)*\n parameter_list ::= (defparameter ",")*\n ( "*" identifier ["," "**" identifier]\n | "**" identifier\n | defparameter [","] )\n defparameter ::= parameter ["=" expression]\n sublist ::= parameter ("," parameter)* [","]\n parameter ::= identifier | "(" sublist ")"\n funcname ::= identifier\n\nA function definition is an executable statement. Its execution binds\nthe function name in the current local namespace to a function object\n(a wrapper around the executable code for the function). This\nfunction object contains a reference to the current global namespace\nas the global namespace to be used when the function is called.\n\nThe function definition does not execute the function body; this gets\nexecuted only when the function is called. [3]\n\nA function definition may be wrapped by one or more *decorator*\nexpressions. Decorator expressions are evaluated when the function is\ndefined, in the scope that contains the function definition. The\nresult must be a callable, which is invoked with the function object\nas the only argument. The returned value is bound to the function name\ninstead of the function object. Multiple decorators are applied in\nnested fashion. For example, the following code:\n\n @f1(arg)\n @f2\n def func(): pass\n\nis equivalent to:\n\n def func(): pass\n func = f1(arg)(f2(func))\n\nWhen one or more top-level *parameters* have the form *parameter*\n``=`` *expression*, the function is said to have "default parameter\nvalues." For a parameter with a default value, the corresponding\n*argument* may be omitted from a call, in which case the parameter\'s\ndefault value is substituted. If a parameter has a default value, all\nfollowing parameters must also have a default value --- this is a\nsyntactic restriction that is not expressed by the grammar.\n\n**Default parameter values are evaluated when the function definition\nis executed.** This means that the expression is evaluated once, when\nthe function is defined, and that the same "pre-computed" value is\nused for each call. This is especially important to understand when a\ndefault parameter is a mutable object, such as a list or a dictionary:\nif the function modifies the object (e.g. by appending an item to a\nlist), the default value is in effect modified. This is generally not\nwhat was intended. A way around this is to use ``None`` as the\ndefault, and explicitly test for it in the body of the function, e.g.:\n\n def whats_on_the_telly(penguin=None):\n if penguin is None:\n penguin = []\n penguin.append("property of the zoo")\n return penguin\n\nFunction call semantics are described in more detail in section\n*Calls*. A function call always assigns values to all parameters\nmentioned in the parameter list, either from position arguments, from\nkeyword arguments, or from default values. If the form\n"``*identifier``" is present, it is initialized to a tuple receiving\nany excess positional parameters, defaulting to the empty tuple. If\nthe form "``**identifier``" is present, it is initialized to a new\ndictionary receiving any excess keyword arguments, defaulting to a new\nempty dictionary.\n\nIt is also possible to create anonymous functions (functions not bound\nto a name), for immediate use in expressions. This uses lambda forms,\ndescribed in section *Lambdas*. Note that the lambda form is merely a\nshorthand for a simplified function definition; a function defined in\na "``def``" statement can be passed around or assigned to another name\njust like a function defined by a lambda form. The "``def``" form is\nactually more powerful since it allows the execution of multiple\nstatements.\n\n**Programmer\'s note:** Functions are first-class objects. A "``def``"\nform executed inside a function definition defines a local function\nthat can be returned or passed around. Free variables used in the\nnested function can access the local variables of the function\ncontaining the def. See section *Naming and binding* for details.\n',
39 'id-classes': '\nReserved classes of identifiers\n*******************************\n\nCertain classes of identifiers (besides keywords) have special\nmeanings. These classes are identified by the patterns of leading and\ntrailing underscore characters:\n\n``_*``\n Not imported by ``from module import *``. The special identifier\n ``_`` is used in the interactive interpreter to store the result of\n the last evaluation; it is stored in the ``__builtin__`` module.\n When not in interactive mode, ``_`` has no special meaning and is\n not defined. See section *The import statement*.\n\n Note: The name ``_`` is often used in conjunction with\n internationalization; refer to the documentation for the\n ``gettext`` module for more information on this convention.\n\n``__*__``\n System-defined names. These names are defined by the interpreter\n and its implementation (including the standard library). Current\n system names are discussed in the *Special method names* section\n and elsewhere. More will likely be defined in future versions of\n Python. *Any* use of ``__*__`` names, in any context, that does\n not follow explicitly documented use, is subject to breakage\n without warning.\n\n``__*``\n Class-private names. Names in this category, when used within the\n context of a class definition, are re-written to use a mangled form\n to help avoid name clashes between "private" attributes of base and\n derived classes. See section *Identifiers (Names)*.\n',
40 'identifiers': '\nIdentifiers and keywords\n************************\n\nIdentifiers (also referred to as *names*) are described by the\nfollowing lexical definitions:\n\n identifier ::= (letter|"_") (letter | digit | "_")*\n letter ::= lowercase | uppercase\n lowercase ::= "a"..."z"\n uppercase ::= "A"..."Z"\n digit ::= "0"..."9"\n\nIdentifiers are unlimited in length. Case is significant.\n\n\nKeywords\n========\n\nThe following identifiers are used as reserved words, or *keywords* of\nthe language, and cannot be used as ordinary identifiers. They must\nbe spelled exactly as written here:\n\n and del from not while\n as elif global or with\n assert else if pass yield\n break except import print\n class exec in raise\n continue finally is return\n def for lambda try\n\nChanged in version 2.4: ``None`` became a constant and is now\nrecognized by the compiler as a name for the built-in object ``None``.\nAlthough it is not a keyword, you cannot assign a different object to\nit.\n\nChanged in version 2.5: Using ``as`` and ``with`` as identifiers\ntriggers a warning. To use them as keywords, enable the\n``with_statement`` future feature .\n\nChanged in version 2.6: ``as`` and ``with`` are full keywords.\n\n\nReserved classes of identifiers\n===============================\n\nCertain classes of identifiers (besides keywords) have special\nmeanings. These classes are identified by the patterns of leading and\ntrailing underscore characters:\n\n``_*``\n Not imported by ``from module import *``. The special identifier\n ``_`` is used in the interactive interpreter to store the result of\n the last evaluation; it is stored in the ``__builtin__`` module.\n When not in interactive mode, ``_`` has no special meaning and is\n not defined. See section *The import statement*.\n\n Note: The name ``_`` is often used in conjunction with\n internationalization; refer to the documentation for the\n ``gettext`` module for more information on this convention.\n\n``__*__``\n System-defined names. These names are defined by the interpreter\n and its implementation (including the standard library). Current\n system names are discussed in the *Special method names* section\n and elsewhere. More will likely be defined in future versions of\n Python. *Any* use of ``__*__`` names, in any context, that does\n not follow explicitly documented use, is subject to breakage\n without warning.\n\n``__*``\n Class-private names. Names in this category, when used within the\n context of a class definition, are re-written to use a mangled form\n to help avoid name clashes between "private" attributes of base and\n derived classes. See section *Identifiers (Names)*.\n',
48 'naming': "\nNaming and binding\n******************\n\n*Names* refer to objects. Names are introduced by name binding\noperations. Each occurrence of a name in the program text refers to\nthe *binding* of that name established in the innermost function block\ncontaining the use.\n\nA *block* is a piece of Python program text that is executed as a\nunit. The following are blocks: a module, a function body, and a class\ndefinition. Each command typed interactively is a block. A script\nfile (a file given as standard input to the interpreter or specified\non the interpreter command line the first argument) is a code block.\nA script command (a command specified on the interpreter command line\nwith the '**-c**' option) is a code block. The file read by the\nbuilt-in function ``execfile()`` is a code block. The string argument\npassed to the built-in function ``eval()`` and to the ``exec``\nstatement is a code block. The expression read and evaluated by the\nbuilt-in function ``input()`` is a code block.\n\nA code block is executed in an *execution frame*. A frame contains\nsome administrative information (used for debugging) and determines\nwhere and how execution continues after the code block's execution has\ncompleted.\n\nA *scope* defines the visibility of a name within a block. If a local\nvariable is defined in a block, its scope includes that block. If the\ndefinition occurs in a function block, the scope extends to any blocks\ncontained within the defining one, unless a contained block introduces\na different binding for the name. The scope of names defined in a\nclass block is limited to the class block; it does not extend to the\ncode blocks of methods -- this includes generator expressions since\nthey are implemented using a function scope. This means that the\nfollowing will fail:\n\n class A:\n a = 42\n b = list(a + i for i in range(10))\n\nWhen a name is used in a code block, it is resolved using the nearest\nenclosing scope. The set of all such scopes visible to a code block\nis called the block's *environment*.\n\nIf a name is bound in a block, it is a local variable of that block.\nIf a name is bound at the module level, it is a global variable. (The\nvariables of the module code block are local and global.) If a\nvariable is used in a code block but not defined there, it is a *free\nvariable*.\n\nWhen a name is not found at all, a ``NameError`` exception is raised.\nIf the name refers to a local variable that has not been bound, a\n``UnboundLocalError`` exception is raised. ``UnboundLocalError`` is a\nsubclass of ``NameError``.\n\nThe following constructs bind names: formal parameters to functions,\n``import`` statements, class and function definitions (these bind the\nclass or function name in the defining block), and targets that are\nidentifiers if occurring in an assignment, ``for`` loop header, in the\nsecond position of an ``except`` clause header or after ``as`` in a\n``with`` statement. The ``import`` statement of the form ``from ...\nimport *`` binds all names defined in the imported module, except\nthose beginning with an underscore. This form may only be used at the\nmodule level.\n\nA target occurring in a ``del`` statement is also considered bound for\nthis purpose (though the actual semantics are to unbind the name). It\nis illegal to unbind a name that is referenced by an enclosing scope;\nthe compiler will report a ``SyntaxError``.\n\nEach assignment or import statement occurs within a block defined by a\nclass or function definition or at the module level (the top-level\ncode block).\n\nIf a name binding operation occurs anywhere within a code block, all\nuses of the name within the block are treated as references to the\ncurrent block. This can lead to errors when a name is used within a\nblock before it is bound. This rule is subtle. Python lacks\ndeclarations and allows name binding operations to occur anywhere\nwithin a code block. The local variables of a code block can be\ndetermined by scanning the entire text of the block for name binding\noperations.\n\nIf the global statement occurs within a block, all uses of the name\nspecified in the statement refer to the binding of that name in the\ntop-level namespace. Names are resolved in the top-level namespace by\nsearching the global namespace, i.e. the namespace of the module\ncontaining the code block, and the builtins namespace, the namespace\nof the module ``__builtin__``. The global namespace is searched\nfirst. If the name is not found there, the builtins namespace is\nsearched. The global statement must precede all uses of the name.\n\nThe builtins namespace associated with the execution of a code block\nis actually found by looking up the name ``__builtins__`` in its\nglobal namespace; this should be a dictionary or a module (in the\nlatter case the module's dictionary is used). By default, when in the\n``__main__`` module, ``__builtins__`` is the built-in module\n``__builtin__`` (note: no 's'); when in any other module,\n``__builtins__`` is an alias for the dictionary of the ``__builtin__``\nmodule itself. ``__builtins__`` can be set to a user-created\ndictionary to create a weak form of restricted execution.\n\n**CPython implementation detail:** Users should not touch\n``__builtins__``; it is strictly an implementation detail. Users\nwanting to override values in the builtins namespace should ``import``\nthe ``__builtin__`` (no 's') module and modify its attributes\nappropriately.\n\nThe namespace for a module is automatically created the first time a\nmodule is imported. The main module for a script is always called\n``__main__``.\n\nThe ``global`` statement has the same scope as a name binding\noperation in the same block. If the nearest enclosing scope for a\nfree variable contains a global statement, the free variable is\ntreated as a global.\n\nA class definition is an executable statement that may use and define\nnames. These references follow the normal rules for name resolution.\nThe namespace of the class definition becomes the attribute dictionary\nof the class. Names defined at the class scope are not visible in\nmethods.\n\n\nInteraction with dynamic features\n=================================\n\nThere are several cases where Python statements are illegal when used\nin conjunction with nested scopes that contain free variables.\n\nIf a variable is referenced in an enclosing scope, it is illegal to\ndelete the name. An error will be reported at compile time.\n\nIf the wild card form of import --- ``import *`` --- is used in a\nfunction and the function contains or is a nested block with free\nvariables, the compiler will raise a ``SyntaxError``.\n\nIf ``exec`` is used in a function and the function contains or is a\nnested block with free variables, the compiler will raise a\n``SyntaxError`` unless the exec explicitly specifies the local\nnamespace for the ``exec``. (In other words, ``exec obj`` would be\nillegal, but ``exec obj in ns`` would be legal.)\n\nThe ``eval()``, ``execfile()``, and ``input()`` functions and the\n``exec`` statement do not have access to the full environment for\nresolving names. Names may be resolved in the local and global\nnamespaces of the caller. Free variables are not resolved in the\nnearest enclosing namespace, but in the global namespace. [1] The\n``exec`` statement and the ``eval()`` and ``execfile()`` functions\nhave optional arguments to override the global and local namespace.\nIf only one namespace is specified, it is used for both.\n",
51 'objects': '\nObjects, values and types\n*************************\n\n*Objects* are Python\'s abstraction for data. All data in a Python\nprogram is represented by objects or by relations between objects. (In\na sense, and in conformance to Von Neumann\'s model of a "stored\nprogram computer," code is also represented by objects.)\n\nEvery object has an identity, a type and a value. An object\'s\n*identity* never changes once it has been created; you may think of it\nas the object\'s address in memory. The \'``is``\' operator compares the\nidentity of two objects; the ``id()`` function returns an integer\nrepresenting its identity (currently implemented as its address). An\nobject\'s *type* is also unchangeable. [1] An object\'s type determines\nthe operations that the object supports (e.g., "does it have a\nlength?") and also defines the possible values for objects of that\ntype. The ``type()`` function returns an object\'s type (which is an\nobject itself). The *value* of some objects can change. Objects\nwhose value can change are said to be *mutable*; objects whose value\nis unchangeable once they are created are called *immutable*. (The\nvalue of an immutable container object that contains a reference to a\nmutable object can change when the latter\'s value is changed; however\nthe container is still considered immutable, because the collection of\nobjects it contains cannot be changed. So, immutability is not\nstrictly the same as having an unchangeable value, it is more subtle.)\nAn object\'s mutability is determined by its type; for instance,\nnumbers, strings and tuples are immutable, while dictionaries and\nlists are mutable.\n\nObjects are never explicitly destroyed; however, when they become\nunreachable they may be garbage-collected. An implementation is\nallowed to postpone garbage collection or omit it altogether --- it is\na matter of implementation quality how garbage collection is\nimplemented, as long as no objects are collected that are still\nreachable.\n\n**CPython implementation detail:** CPython currently uses a reference-\ncounting scheme with (optional) delayed detection of cyclically linked\ngarbage, which collects most objects as soon as they become\nunreachable, but is not guaranteed to collect garbage containing\ncircular references. See the documentation of the ``gc`` module for\ninformation on controlling the collection of cyclic garbage. Other\nimplementations act differently and CPython may change. Do not depend\non immediate finalization of objects when they become unreachable (ex:\nalways close files).\n\nNote that the use of the implementation\'s tracing or debugging\nfacilities may keep objects alive that would normally be collectable.\nAlso note that catching an exception with a \'``try``...``except``\'\nstatement may keep objects alive.\n\nSome objects contain references to "external" resources such as open\nfiles or windows. It is understood that these resources are freed\nwhen the object is garbage-collected, but since garbage collection is\nnot guaranteed to happen, such objects also provide an explicit way to\nrelease the external resource, usually a ``close()`` method. Programs\nare strongly recommended to explicitly close such objects. The\n\'``try``...``finally``\' statement provides a convenient way to do\nthis.\n\nSome objects contain references to other objects; these are called\n*containers*. Examples of containers are tuples, lists and\ndictionaries. The references are part of a container\'s value. In\nmost cases, when we talk about the value of a container, we imply the\nvalues, not the identities of the contained objects; however, when we\ntalk about the mutability of a container, only the identities of the\nimmediately contained objects are implied. So, if an immutable\ncontainer (like a tuple) contains a reference to a mutable object, its\nvalue changes if that mutable object is changed.\n\nTypes affect almost all aspects of object behavior. Even the\nimportance of object identity is affected in some sense: for immutable\ntypes, operations that compute new values may actually return a\nreference to any existing object with the same type and value, while\nfor mutable objects this is not allowed. E.g., after ``a = 1; b =\n1``, ``a`` and ``b`` may or may not refer to the same object with the\nvalue one, depending on the implementation, but after ``c = []; d =\n[]``, ``c`` and ``d`` are guaranteed to refer to two different,\nunique, newly created empty lists. (Note that ``c = d = []`` assigns\nthe same object to both ``c`` and ``d``.)\n',
52 'operator-summary': '\nOperator precedence\n*******************\n\nThe following table summarizes the operator precedences in Python,\nfrom lowest precedence (least binding) to highest precedence (most\nbinding). Operators in the same box have the same precedence. Unless\nthe syntax is explicitly given, operators are binary. Operators in\nthe same box group left to right (except for comparisons, including\ntests, which all have the same precedence and chain from left to right\n--- see section *Comparisons* --- and exponentiation, which groups\nfrom right to left).\n\n+-------------------------------------------------+---------------------------------------+\n| Operator | Description |\n+=================================================+=======================================+\n| ``lambda`` | Lambda expression |\n+-------------------------------------------------+---------------------------------------+\n| ``if`` -- ``else`` | Conditional expression |\n+-------------------------------------------------+---------------------------------------+\n| ``or`` | Boolean OR |\n+-------------------------------------------------+---------------------------------------+\n| ``and`` | Boolean AND |\n+-------------------------------------------------+---------------------------------------+\n| ``not`` ``x`` | Boolean NOT |\n+-------------------------------------------------+---------------------------------------+\n| ``in``, ``not in``, ``is``, ``is not``, ``<``, | Comparisons, including membership |\n| ``<=``, ``>``, ``>=``, ``<>``, ``!=``, ``==`` | tests and identity tests |\n+-------------------------------------------------+---------------------------------------+\n| ``|`` | Bitwise OR |\n+-------------------------------------------------+---------------------------------------+\n| ``^`` | Bitwise XOR |\n+-------------------------------------------------+---------------------------------------+\n| ``&`` | Bitwise AND |\n+-------------------------------------------------+---------------------------------------+\n| ``<<``, ``>>`` | Shifts |\n+-------------------------------------------------+---------------------------------------+\n| ``+``, ``-`` | Addition and subtraction |\n+-------------------------------------------------+---------------------------------------+\n| ``*``, ``/``, ``//``, ``%`` | Multiplication, division, remainder |\n| | [8] |\n+-------------------------------------------------+---------------------------------------+\n| ``+x``, ``-x``, ``~x`` | Positive, negative, bitwise NOT |\n+-------------------------------------------------+---------------------------------------+\n| ``**`` | Exponentiation [9] |\n+-------------------------------------------------+---------------------------------------+\n| ``x[index]``, ``x[index:index]``, | Subscription, slicing, call, |\n| ``x(arguments...)``, ``x.attribute`` | attribute reference |\n+-------------------------------------------------+---------------------------------------+\n| ``(expressions...)``, ``[expressions...]``, | Binding or tuple display, list |\n| ``{key: value...}``, ```expressions...``` | display, dictionary display, string |\n| | conversion |\n+-------------------------------------------------+---------------------------------------+\n\n-[ Footnotes ]-\n\n[1] In Python 2.3 and later releases, a list comprehension "leaks" the\n control variables of each ``for`` it contains into the containing\n scope. However, this behavior is deprecated, and relying on it\n will not work in Python 3.\n\n[2] While ``abs(x%y) < abs(y)`` is true mathematically, for floats it\n may not be true numerically due to roundoff. For example, and\n assuming a platform on which a Python float is an IEEE 754 double-\n precision number, in order that ``-1e-100 % 1e100`` have the same\n sign as ``1e100``, the computed result is ``-1e-100 + 1e100``,\n which is numerically exactly equal to ``1e100``. The function\n ``math.fmod()`` returns a result whose sign matches the sign of\n the first argument instead, and so returns ``-1e-100`` in this\n case. Which approach is more appropriate depends on the\n application.\n\n[3] If x is very close to an exact integer multiple of y, it\'s\n possible for ``floor(x/y)`` to be one larger than ``(x-x%y)/y``\n due to rounding. In such cases, Python returns the latter result,\n in order to preserve that ``divmod(x,y)[0] * y + x % y`` be very\n close to ``x``.\n\n[4] While comparisons between unicode strings make sense at the byte\n level, they may be counter-intuitive to users. For example, the\n strings ``u"\\u00C7"`` and ``u"\\u0043\\u0327"`` compare differently,\n even though they both represent the same unicode character (LATIN\n CAPITAL LETTER C WITH CEDILLA). To compare strings in a human\n recognizable way, compare using ``unicodedata.normalize()``.\n\n[5] The implementation computes this efficiently, without constructing\n lists or sorting.\n\n[6] Earlier versions of Python used lexicographic comparison of the\n sorted (key, value) lists, but this was very expensive for the\n common case of comparing for equality. An even earlier version of\n Python compared dictionaries by identity only, but this caused\n surprises because people expected to be able to test a dictionary\n for emptiness by comparing it to ``{}``.\n\n[7] Due to automatic garbage-collection, free lists, and the dynamic\n nature of descriptors, you may notice seemingly unusual behaviour\n in certain uses of the ``is`` operator, like those involving\n comparisons between instance methods, or constants. Check their\n documentation for more info.\n\n[8] The ``%`` operator is also used for string formatting; the same\n precedence applies.\n\n[9] The power operator ``**`` binds less tightly than an arithmetic or\n bitwise unary operator on its right, that is, ``2**-1`` is\n ``0.5``.\n',
61 'specialnames': '\nSpecial method names\n********************\n\nA class can implement certain operations that are invoked by special\nsyntax (such as arithmetic operations or subscripting and slicing) by\ndefining methods with special names. This is Python\'s approach to\n*operator overloading*, allowing classes to define their own behavior\nwith respect to language operators. For instance, if a class defines\na method named ``__getitem__()``, and ``x`` is an instance of this\nclass, then ``x[i]`` is roughly equivalent to ``x.__getitem__(i)`` for\nold-style classes and ``type(x).__getitem__(x, i)`` for new-style\nclasses. Except where mentioned, attempts to execute an operation\nraise an exception when no appropriate method is defined (typically\n``AttributeError`` or ``TypeError``).\n\nWhen implementing a class that emulates any built-in type, it is\nimportant that the emulation only be implemented to the degree that it\nmakes sense for the object being modelled. For example, some\nsequences may work well with retrieval of individual elements, but\nextracting a slice may not make sense. (One example of this is the\n``NodeList`` interface in the W3C\'s Document Object Model.)\n\n\nBasic customization\n===================\n\nobject.__new__(cls[, ...])\n\n Called to create a new instance of class *cls*. ``__new__()`` is a\n static method (special-cased so you need not declare it as such)\n that takes the class of which an instance was requested as its\n first argument. The remaining arguments are those passed to the\n object constructor expression (the call to the class). The return\n value of ``__new__()`` should be the new object instance (usually\n an instance of *cls*).\n\n Typical implementations create a new instance of the class by\n invoking the superclass\'s ``__new__()`` method using\n ``super(currentclass, cls).__new__(cls[, ...])`` with appropriate\n arguments and then modifying the newly-created instance as\n necessary before returning it.\n\n If ``__new__()`` returns an instance of *cls*, then the new\n instance\'s ``__init__()`` method will be invoked like\n ``__init__(self[, ...])``, where *self* is the new instance and the\n remaining arguments are the same as were passed to ``__new__()``.\n\n If ``__new__()`` does not return an instance of *cls*, then the new\n instance\'s ``__init__()`` method will not be invoked.\n\n ``__new__()`` is intended mainly to allow subclasses of immutable\n types (like int, str, or tuple) to customize instance creation. It\n is also commonly overridden in custom metaclasses in order to\n customize class creation.\n\nobject.__init__(self[, ...])\n\n Called when the instance is created. The arguments are those\n passed to the class constructor expression. If a base class has an\n ``__init__()`` method, the derived class\'s ``__init__()`` method,\n if any, must explicitlyexplicitly\n call it to ensure proper deletion of the base class part of the\n instance. Note that it is possible (though not recommended!) for\n the ``__del__()`` method to postpone destruction of the instance by\n creating a new reference to it. It may then be called at a later\n time when this new reference is deleted. It is not guaranteed that\n ``__del__()`` methods are called for objects that still exist when\n the interpreter exits.\n\n Note: ``del x`` doesn\'t directly call ``x.__del__()`` --- the former\n decrements the reference count for ``x`` by one, and the latter\n is only called when ``x``\'s reference count reaches zero. Some\n common situations that may prevent the reference count of an\n object from going to zero include: circular references between\n objects (e.g., a doubly-linked list or a tree data structure with\n parent and child pointers); a reference to the object on the\n stack frame of a function that caught an exception (the traceback\n stored in ``sys.exc_traceback`` keeps the stack frame alive); or\n a reference to the object on the stack frame that raised an\n unhandled exception in interactive mode (the traceback stored in\n ``sys.last_traceback`` keeps the stack frame alive). The first\n situation can only be remedied by explicitly breaking the cycles;\n the latter two situations can be resolved by storing ``None`` in\n ``sys.exc_traceback`` or ``sys.last_traceback``. Circular\n references which are garbage are detected when the option cycle\n detector is enabled (it\'s on by default), but can only be cleaned\n up if there are no Python-level ``__del__()`` methods involved.\n Refer to the documentation for the ``gc`` module for more\n information about how ``__del__()`` methods are handled by the\n cycle detector, particularly the description of the ``garbage``\n value.\n\n Warning: Due to the precarious circumstances under which ``__del__()``\n methods are invoked, exceptions that occur during their execution\n are ignored, and a warning is printed to ``sys.stderr`` instead.\n Also, when ``__del__()`` is invoked in response to a module being\n deleted (e.g., when execution of the program is done), other\n globals referenced by the ``__del__()`` method may already have\n been deleted or in the process of being torn down (e.g. the\n import machinery shutting down). For this reason, ``__del__()``\n methods should do the absolute minimum needed to maintain\n external invariants. Starting with version 1.5, Python\n guarantees that globals whose name begins with a single\n underscore are deleted from their module before other globals are\n deleted; if no other references to such globals exist, this may\n help in assuring that imported modules are still available at the\n time when the ``__del__()`` method is called.\n\n See also the *-R* command-line option.\n\nobject.__repr__(self)\n\n Called by the ``repr()`` built-in function and by string\n conversions (reverse quotes) to compute the "official" string\n representation of an object. If at all possible, this should look\n like a valid Python expression that could be used to recreate an\n object with the same value (given an appropriate environment). If\n this is not possible, a string of the form ``<...some useful\n description...>`` should be returned. The return value must be a\n string object. If a class defines ``__repr__()`` but not\n ``__str__()``, then ``__repr__()`` is also used when an "informal"\n string representation of instances of that class is required.\n\n This is typically used for debugging, so it is important that the\n representation is information-rich and unambiguous.\n\nobject.__str__(self)\n\n Called by the ``str()`` built-in function and by the ``print``\n statement to compute the "informal" string representation of an\n object. This differs from ``__repr__()`` in that it does not have\n to be a valid Python expression: a more convenient or concise\n representation may be used instead. The return value must be a\n string object.\n\nobject.__lt__(self, other)\nobject.__le__(self, other)\nobject.__eq__(self, other)\nobject.__ne__(self, other)\nobject.__gt__(self, other)\nobject.__ge__(self, other)\n\n New in version 2.1.\n\n These are the so-called "rich comparison" methods, and are called\n for comparison operators in preference to ``__cmp__()`` below. The\n correspondence between operator symbols and method names is as\n follows: ``x<y`` calls ``x.__lt__(y)``, ``x<=y`` calls\n ``x.__le__(y)``, ``x==y`` calls ``x.__eq__(y)``, ``x!=y`` and\n ``x<>y`` call ``x.__ne__(y)``, ``x>y`` calls ``x.__gt__(y)``, and\n ``x>=y`` calls ``x.__ge__(y)``.\n\n A rich comparison method may return the singleton\n ``NotImplemented`` if it does not implement the operation for a\n given pair of arguments. By convention, ``False`` and ``True`` are\n returned for a successful comparison. However, these methods can\n return any value, so if the comparison operator is used in a\n Boolean context (e.g., in the condition of an ``if`` statement),\n Python will call ``bool()`` on the value to determine if the result\n is true or false.\n\n There are no implied relationships among the comparison operators.\n The truth of ``x==y`` does not imply that ``x!=y`` is false.\n Accordingly, when defining ``__eq__()``, one should also define\n ``__ne__()`` so that the operators will behave as expected. See\n the paragraph on ``__hash__()`` for some important notes on\n creating *hashable* objects which support custom comparison\n operations and are usable as dictionary keys.\n\n There are no swapped-argument versions of these methods (to be used\n when the left argument does not support the operation but the right\n argument does); rather, ``__lt__()`` and ``__gt__()`` are each\n other\'s reflection, ``__le__()`` and ``__ge__()`` are each other\'s\n reflection, and ``__eq__()`` and ``__ne__()`` are their own\n reflection.\n\n Arguments to rich comparison methods are never coerced.\n\n To automatically generate ordering operations from a single root\n operation, see ``functools.total_ordering()``.\n\nobject.__cmp__(self, other)\n\n Called by comparison operations if rich comparison (see above) is\n not defined. Should return a negative integer if ``self < other``,\n zero if ``self == other``, a positive integer if ``self > other``.\n If no ``__cmp__()``, ``__eq__()`` or ``__ne__()`` operation is\n defined, class instances are compared by object identity\n ("address"). See also the description of ``__hash__()`` for some\n important notes on creating *hashable* objects which support custom\n comparison operations and are usable as dictionary keys. (Note: the\n restriction that exceptions are not propagated by ``__cmp__()`` has\n been removed since Python 1.5.)\n\nobject.__rcmp__(self, other)\n\n Changed in version 2.1: No longer supported.\n\nobject.__hash__(self)\n\n Called by built-in function ``hash()`` and for operations on\n members of hashed collections including ``set``, ``frozenset``, and\n ``dict``. ``__hash__()`` should return an integer. The only\n required property is that objects which compare equal have the same\n hash value; it is advised to somehow mix together (e.g. using\n exclusive or) the hash values for the components of the object that\n also play a part in comparison of objects.\n\n If a class does not define a ``__cmp__()`` or ``__eq__()`` method\n it should not define a ``__hash__()`` operation either; if it\n defines ``__cmp__()`` or ``__eq__()`` but not ``__hash__()``, its\n instances will not be usable in hashed collections. If a class\n defines mutable objects and implements a ``__cmp__()`` or\n ``__eq__()`` method, it should not implement ``__hash__()``, since\n hashable collection implementations require that a object\'s hash\n value is immutable (if the object\'s hash value changes, it will be\n in the wrong hash bucket).\n\n User-defined classes have ``__cmp__()`` and ``__hash__()`` methods\n by default; with them, all objects compare unequal (except with\n themselves) and ``x.__hash__()`` returns ``id(x)``.\n\n Classes which inherit a ``__hash__()`` method from a parent class\n but change the meaning of ``__cmp__()`` or ``__eq__()`` such that\n the hash value returned is no longer appropriate (e.g. by switching\n to a value-based concept of equality instead of the default\n identity based equality) can explicitly flag themselves as being\n unhashable by setting ``__hash__ = None`` in the class definition.\n Doing so means that not only will instances of the class raise an\n appropriate ``TypeError`` when a program attempts to retrieve their\n hash value, but they will also be correctly identified as\n unhashable when checking ``isinstance(obj, collections.Hashable)``\n (unlike classes which define their own ``__hash__()`` to explicitly\n raise ``TypeError``).\n\n Changed in version 2.5: ``__hash__()`` may now also return a long\n integer object; the 32-bit integer is then derived from the hash of\n that object.\n\n Changed in version 2.6: ``__hash__`` may now be set to ``None`` to\n explicitly flag instances of a class as unhashable.\n\nobject.__nonzero__(self)\n\n Called to implement truth value testing and the built-in operation\n ``bool()``; should return ``False`` or ``True``, or their integer\n equivalents ``0`` or ``1``. When this method is not defined,\n ``__len__()`` is called, if it is defined, and the object is\n considered true if its result is nonzero. If a class defines\n neither ``__len__()`` nor ``__nonzero__()``, all its instances are\n considered true.\n\nobject.__unicode__(self)\n\n Called to implement ``unicode()`` built-in; should return a Unicode\n object. When this method is not defined, string conversion is\n attempted, and the result of string conversion is converted to\n Unicode using the system default encoding.\n\n\nCustomizing attribute access\n============================\n\nThe following methods can be defined to customize the meaning of\nattribute access (use of, assignment to, or deletion of ``x.name``)\nfor class instances.\n\nobject.__getattr__(self, name)\n\n Called when an attribute lookup has not found the attribute in the\n usual places (i.e. it is not an instance attribute nor is it found\n in the class tree for ``self``). ``name`` is the attribute name.\n This method should return the (computed) attribute value or raise\n an ``AttributeError`` exception.\n\n Note that if the attribute is found through the normal mechanism,\n ``__getattr__()`` is not called. (This is an intentional asymmetry\n between ``__getattr__()`` and ``__setattr__()``.) This is done both\n for efficiency reasons and because otherwise ``__getattr__()``\n would have no way to access other attributes of the instance. Note\n that at least for instance variables, you can fake total control by\n not inserting any values in the instance attribute dictionary (but\n instead inserting them in another object). See the\n ``__getattribute__()`` method below for a way to actually get total\n control in new-style classes.\n\nobject.__setattr__(self, name, value)\n\n Called when an attribute assignment is attempted. This is called\n instead of the normal mechanism (i.e. store the value in the\n instance dictionary). *name* is the attribute name, *value* is the\n value to be assigned to it.\n\n If ``__setattr__()`` wants to assign to an instance attribute, it\n should not simply execute ``self.name = value`` --- this would\n cause a recursive call to itself. Instead, it should insert the\n value in the dictionary of instance attributes, e.g.,\n ``self.__dict__[name] = value``. For new-style classes, rather\n than accessing the instance dictionary, it should call the base\n class method with the same name, for example,\n ``object.__setattr__(self, name, value)``.\n\nobject.__delattr__(self, name)\n\n Like ``__setattr__()`` but for attribute deletion instead of\n assignment. This should only be implemented if ``del obj.name`` is\n meaningful for the object.\n\n\nMore attribute access for new-style classes\n-------------------------------------------\n\nThe following methods only apply to new-style classes.\n\nobject.__getattribute__(self, name)\n\n Called unconditionally to implement attribute accesses for\n instances of the class. If the class also defines\n ``__getattr__()``, the latter will not be called unless\n ``__getattribute__()`` either calls it explicitlyloat``, and ``complex`` do not use coercion. All these\n types implement a ``__coerce__()`` method, for use by the built-in\n ``coerce()`` function.\n\n Changed in version 2.7.\n\n\nWith Statement Context Managers\n===============================\n\nNew in version 2.5.\n\nA *context manager* is an object that defines the runtime context to\nbe established when executing a ``with`` statement. The context\nmanager handles the entry into, and the exit from, the desired runtime\ncontext for the execution of the block of code. Context managers are\nnormally invoked using the ``with`` statement (described in section\n*The with statement*), but can also be used by directly invoking their\nmethods.\n\nTypical uses of context managers include saving and restoring various\nkinds of global state, locking and unlocking resources, closing opened\nfiles, etc.\n\nFor more information on context managers, see *Context Manager Types*.\n\nobject.__enter__(self)\n\n Enter the runtime context related to this object. The ``with``\n statement will bind this method\'s return value to the target(s)\n specified in the ``as`` clause of the statement, if any.\n\nobject.__exit__(self, exc_type, exc_value, traceback)\n\n Exit the runtime context related to this object. The parameters\n describe the exception that caused the context to be exited. If the\n context was exited without an exception, all three arguments will\n be ``None``.\n\n If an exception is supplied, and the method wishes to suppress the\n exception (i.e., prevent it from being propagated), it should\n return a true value. Otherwise, the exception will be processed\n normally upon exit from this method.\n\n Note that ``__exit__()`` methods should not reraise the passed-in\n exception; this is the caller\'s responsibility.\n\nSee also:\n\n **PEP 0343** - The "with" statement\n The specification, background, and examples for the Python\n ``with`` statement.\n\n\nSpecial method lookup for old-style classes\n===========================================\n\nFor old-style classes, special methods are always looked up in exactly\nthe same way as any other method or attribute. This is the case\nregardless of whether the method is being looked up explicitly
67 'types': '\nThe standard type hierarchy\n***************************\n\nBelow is a list of the types that are built into Python. Extension\nmodules (written in C, Java, or other languages, depending on the\nimplementation) can define additional types. Future versions of\nPython may add types to the type hierarchy (e.g., rational numbers,\nefficiently stored arrays of integers, etc.).\n\nSome of the type descriptions below contain a paragraph listing\n\'special attributes.\' These are attributes that provide access to the\nimplementation and are not intended for general use. Their definition\nmay change in the future.\n\nNone\n This type has a single value. There is a single object with this\n value. This object is accessed through the built-in name ``None``.\n It is used to signify the absence of a value in many situations,\n e.g., it is returned from functions that don\'t explicitly_ import\n division``) also use bits in ``co_flags`` to indicate whether a\n code object was compiled with a particular feature enabled: bit\n ``0x2000`` is set if the function was compiled with future\n division enabled; bits ``0x10`` and ``0x1000`` were used in\n earlier versions of Python.\n\n Other bits in ``co_flags`` are reserved for internal use.\n\n If a code object represents a function, the first item in\n ``co_consts`` is the documentation string of the function, or\n ``None`` if undefined.\n\n Frame objects\n Frame objects represent execution frames. They may occur in\n traceback objects (see below).\n\n Special read-only attributes: ``f_back`` is to the previous\n stack frame (towards the caller), or ``None`` if this is the\n bottom stack frame; ``f_code`` is the code object being executed\n in this frame; ``f_locals`` is the dictionary used to look up\n local variables; ``f_globals`` is used for global variables;\n ``f_builtins`` is used for built-in (intrinsic) names;\n ``f_restricted`` is a flag indicating whether the function is\n executing in restricted execution mode; ``f_lasti`` gives the\n precise instruction (this is an index into the bytecode string\n of the code object).\n\n Special writable attributes: ``f_trace``, if not ``None``, is a\n function called at the start of each source code line (this is\n used by the debugger); ``f_exc_type``, ``f_exc_value``,\n ``f_exc_traceback`` represent the last exception raised in the\n parent frame provided another exception was ever raised in the\n current frame (in all other cases they are None); ``f_lineno``\n is the current line number of the frame --- writing to this from\n within a trace function jumps to the given line (only for the\n bottom-most frame). A debugger can implement a Jump command\n (aka Set Next Statement) by writing to f_lineno.\n\n Traceback objects\n Traceback objects represent a stack trace of an exception. A\n traceback object is created when an exception occurs. When the\n search for an exception handler unwinds the execution stack, at\n each unwound level a traceback object is inserted in front of\n the current traceback. When an exception handler is entered,\n the stack trace is made available to the program. (See section\n *The try statement*.) It is accessible as ``sys.exc_traceback``,\n and also as the third item of the tuple returned by\n ``sys.exc_info()``. The latter is the preferred interface,\n since it works correctly when the program is using multiple\n threads. When the program contains no suitable handler, the\n stack trace is written (nicely formatted) to the standard error\n stream; if the interpreter is interactive, it is also made\n available to the user as ``sys.last_traceback``.\n\n Special read-only attributes: ``tb_next`` is the next level in\n the stack trace (towards the frame where the exception\n occurred), or ``None`` if there is no next level; ``tb_frame``\n points to the execution frame of the current level;\n ``tb_lineno`` gives the line number where the exception\n occurred; ``tb_lasti`` indicates the precise instruction. The\n line number and last instruction in the traceback may differ\n from the line number of its frame object if the exception\n occurred in a ``try`` statement with no matching except clause\n or with a finally clause.\n\n Slice objects\n Slice objects are used to represent slices when *extended slice\n syntax* is used. This is a slice using two colons, or multiple\n slices or ellipses separated by commas, e.g., ``a[i:j:step]``,\n ``a[i:j, k:l]``, or ``a[..., i:j]``. They are also created by\n the built-in ``slice()`` function.\n\n Special read-only attributes: ``start`` is the lower bound;\n ``stop`` is the upper bound; ``step`` is the step value; each is\n ``None`` if omitted. These attributes can have any type.\n\n Slice objects support one method:\n\n slice.indices(self, length)\n\n This method takes a single integer argument *length* and\n computes information about the extended slice that the slice\n object would describe if applied to a sequence of *length*\n items. It returns a tuple of three integers; respectively\n these are the *start* and *stop* indices and the *step* or\n stride length of the slice. Missing or out-of-bounds indices\n are handled in a manner consistent with regular slices.\n\n New in version 2.3.\n\n Static method objects\n Static method objects provide a way of defeating the\n transformation of function objects to method objects described\n above. A static method object is a wrapper around any other\n object, usually a user-defined method object. When a static\n method object is retrieved from a class or a class instance, the\n object actually returned is the wrapped object, which is not\n subject to any further transformation. Static method objects are\n not themselves callable, although the objects they wrap usually\n are. Static method objects are created by the built-in\n ``staticmethod()`` constructor.\n\n Class method objects\n A class method object, like a static method object, is a wrapper\n around another object that alters the way in which that object\n is retrieved from classes and class instances. The behaviour of\n class method objects upon such retrieval is described above,\n under "User-defined methods". Class method objects are created\n by the built-in ``classmethod()`` constructor.\n',
70 'typesmethods': '\nMethods\n*******\n\nMethods are functions that are called using the attribute notation.\nThere are two flavors: built-in methods (such as ``append()`` on\nlists) and class instance methods. Built-in methods are described\nwith the types that support them.\n\nThe implementation adds two special read-only attributes to class\ninstance methods: ``m.im_self`` is the object on which the method\noperates, and ``m.im_func`` is the function implementing the method.\nCalling ``m(arg-1, arg-2, ..., arg-n)`` is completely equivalent to\ncalling ``m.im_func(m.im_self, arg-1, arg-2, ..., arg-n)``.\n\nClass instance methods are either *bound* or *unbound*, referring to\nwhether the method was accessed through an instance or a class,\nrespectively. When a method is unbound, its ``im_self`` attribute\nwill be ``None`` and if called, an explicit ``self`` object must be\npassed as the first argument. In this case, ``self`` must be an\ninstance of the unbound method\'s class (or a subclass of that class),\notherwise a ``TypeError`` is raised.\n\nLike function objects, methods objects support getting arbitrary\nattributes. However, since method attributes are actually stored on\nthe underlying function object (``meth.im_func``), setting method\nattributes on either bound or unbound methods is disallowed.\nAttempting to set an attribute on a method results in an\n``AttributeError`` being raised. In order to set a method attribute,\nyou need to explicitly set it on the underlying function object:\n\n >>> class C:\n ... def method(self):\n ... pass\n ...\n >>> c = C()\n >>> c.method.whoami = \'my name is method\' # can\'t set on the method\n Traceback (most recent call last):\n File "<stdin>", line 1, in <module>\n AttributeError: \'instancemethod\' object has no attribute \'whoami\'\n >>> c.method.im_func.whoami = \'my name is method\'\n >>> c.method.whoami\n \'my name is method\'\n\nSee *The standard type hierarchy* for more information.\n',