1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the L2CAP API definitions 22 * 23 ******************************************************************************/ 24 #ifndef L2C_API_H 25 #define L2C_API_H 26 27 #include "bt_target.h" 28 #include "l2cdefs.h" 29 #include "hcidefs.h" 30 31 /***************************************************************************** 32 ** Constants 33 *****************************************************************************/ 34 35 /* Define the minimum offset that L2CAP needs in a buffer. This is made up of 36 ** HCI type(1), len(2), handle(2), L2CAP len(2) and CID(2) => 9 37 */ 38 #define L2CAP_MIN_OFFSET 13 /* plus control(2), SDU length(2) */ 39 40 /* Minimum offset for broadcast needs another two bytes for the PSM */ 41 #define L2CAP_BCST_MIN_OFFSET 11 42 43 /* ping result codes */ 44 #define L2CAP_PING_RESULT_OK 0 /* Ping reply received OK */ 45 #define L2CAP_PING_RESULT_NO_LINK 1 /* Link could not be setup */ 46 #define L2CAP_PING_RESULT_NO_RESP 2 /* Remote L2CAP did not reply */ 47 48 /* result code for L2CA_DataWrite() */ 49 #define L2CAP_DW_FAILED FALSE 50 #define L2CAP_DW_SUCCESS TRUE 51 #define L2CAP_DW_CONGESTED 2 52 53 /* Values for priority parameter to L2CA_SetAclPriority */ 54 #define L2CAP_PRIORITY_NORMAL 0 55 #define L2CAP_PRIORITY_HIGH 1 56 57 /* Values for priority parameter to L2CA_SetTxPriority */ 58 #define L2CAP_CHNL_PRIORITY_HIGH 0 59 #define L2CAP_CHNL_PRIORITY_MEDIUM 1 60 #define L2CAP_CHNL_PRIORITY_LOW 2 61 62 typedef UINT8 tL2CAP_CHNL_PRIORITY; 63 64 /* Values for Tx/Rx data rate parameter to L2CA_SetChnlDataRate */ 65 #define L2CAP_CHNL_DATA_RATE_HIGH 3 66 #define L2CAP_CHNL_DATA_RATE_MEDIUM 2 67 #define L2CAP_CHNL_DATA_RATE_LOW 1 68 #define L2CAP_CHNL_DATA_RATE_NO_TRAFFIC 0 69 70 typedef UINT8 tL2CAP_CHNL_DATA_RATE; 71 72 /* Data Packet Flags (bits 2-15 are reserved) */ 73 /* layer specific 14-15 bits are used for FCR SAR */ 74 #define L2CAP_FLUSHABLE_MASK 0x0003 75 #define L2CAP_FLUSHABLE_CH_BASED 0x0000 76 #define L2CAP_FLUSHABLE_PKT 0x0001 77 #define L2CAP_NON_FLUSHABLE_PKT 0x0002 78 79 80 /* L2CA_FlushChannel num_to_flush definitions */ 81 #define L2CAP_FLUSH_CHANS_ALL 0xffff 82 #define L2CAP_FLUSH_CHANS_GET 0x0000 83 84 85 /* special CID for Multi-AV for reporting congestion */ 86 #define L2CAP_MULTI_AV_CID 0 87 88 /* length of the HCI header block */ 89 /* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) */ 90 #define L2CAP_MULTI_AV_HCI_HDR_LEN 8 91 92 /* length of padding for 4 bytes align */ 93 #define L2CAP_MULTI_AV_PADDING_LEN 2 94 95 /* length of the HCI header block with padding for FCR */ 96 /* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) + padding(2) */ 97 #define L2CAP_MULTI_AV_HCI_HDR_LEN_WITH_PADDING 10 98 99 /* length of the L2CAP header block */ 100 /* HCI header(4) + L2CAP header(4) + padding(4) or control word(2) + FCS(2) */ 101 #define L2CAP_MULTI_AV_L2C_HDR_LEN 12 102 103 /* definition used for L2CA_SetDesireRole */ 104 #define L2CAP_ROLE_SLAVE HCI_ROLE_SLAVE 105 #define L2CAP_ROLE_MASTER HCI_ROLE_MASTER 106 #define L2CAP_ROLE_ALLOW_SWITCH 0x80 /* set this bit to allow switch at create conn */ 107 #define L2CAP_ROLE_DISALLOW_SWITCH 0x40 /* set this bit to disallow switch at create conn */ 108 #define L2CAP_ROLE_CHECK_SWITCH 0xC0 109 110 111 /* Values for 'allowed_modes' field passed in structure tL2CAP_ERTM_INFO 112 */ 113 #define L2CAP_FCR_CHAN_OPT_BASIC (1 << L2CAP_FCR_BASIC_MODE) 114 #define L2CAP_FCR_CHAN_OPT_ERTM (1 << L2CAP_FCR_ERTM_MODE) 115 #define L2CAP_FCR_CHAN_OPT_STREAM (1 << L2CAP_FCR_STREAM_MODE) 116 117 #define L2CAP_FCR_CHAN_OPT_ALL_MASK (L2CAP_FCR_CHAN_OPT_BASIC | L2CAP_FCR_CHAN_OPT_ERTM | L2CAP_FCR_CHAN_OPT_STREAM) 118 119 /* Validity check for PSM. PSM values must be odd. Also, all PSM values must 120 ** be assigned such that the least significant bit of the most sigificant 121 ** octet equals zero. 122 */ 123 #define L2C_INVALID_PSM(psm) (((psm) & 0x0101) != 0x0001) 124 #define L2C_IS_VALID_PSM(psm) (((psm) & 0x0101) == 0x0001) 125 126 /***************************************************************************** 127 ** Type Definitions 128 *****************************************************************************/ 129 130 typedef struct 131 { 132 #define L2CAP_FCR_BASIC_MODE 0x00 133 #define L2CAP_FCR_ERTM_MODE 0x03 134 #define L2CAP_FCR_STREAM_MODE 0x04 135 136 UINT8 mode; 137 138 UINT8 tx_win_sz; 139 UINT8 max_transmit; 140 UINT16 rtrans_tout; 141 UINT16 mon_tout; 142 UINT16 mps; 143 } tL2CAP_FCR_OPTS; 144 145 /* Define a structure to hold the configuration parameters. Since the 146 ** parameters are optional, for each parameter there is a boolean to 147 ** use to signify its presence or absence. 148 */ 149 typedef struct 150 { 151 UINT16 result; /* Only used in confirm messages */ 152 BOOLEAN mtu_present; 153 UINT16 mtu; 154 BOOLEAN qos_present; 155 FLOW_SPEC qos; 156 BOOLEAN flush_to_present; 157 UINT16 flush_to; 158 BOOLEAN fcr_present; 159 tL2CAP_FCR_OPTS fcr; 160 BOOLEAN fcs_present; /* Optionally bypasses FCS checks */ 161 UINT8 fcs; /* '0' if desire is to bypass FCS, otherwise '1' */ 162 BOOLEAN ext_flow_spec_present; 163 tHCI_EXT_FLOW_SPEC ext_flow_spec; 164 UINT16 flags; /* bit 0: 0-no continuation, 1-continuation */ 165 } tL2CAP_CFG_INFO; 166 167 /* L2CAP channel configured field bitmap */ 168 #define L2CAP_CH_CFG_MASK_MTU 0x0001 169 #define L2CAP_CH_CFG_MASK_QOS 0x0002 170 #define L2CAP_CH_CFG_MASK_FLUSH_TO 0x0004 171 #define L2CAP_CH_CFG_MASK_FCR 0x0008 172 #define L2CAP_CH_CFG_MASK_FCS 0x0010 173 #define L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC 0x0020 174 175 typedef UINT16 tL2CAP_CH_CFG_BITS; 176 177 /********************************* 178 ** Callback Functions Prototypes 179 **********************************/ 180 181 /* Connection indication callback prototype. Parameters are 182 ** BD Address of remote 183 ** Local CID assigned to the connection 184 ** PSM that the remote wants to connect to 185 ** Identifier that the remote sent 186 */ 187 typedef void (tL2CA_CONNECT_IND_CB) (BD_ADDR, UINT16, UINT16, UINT8); 188 189 190 /* Connection confirmation callback prototype. Parameters are 191 ** Local CID 192 ** Result - 0 = connected, non-zero means failure reason 193 */ 194 typedef void (tL2CA_CONNECT_CFM_CB) (UINT16, UINT16); 195 196 197 /* Connection pending callback prototype. Parameters are 198 ** Local CID 199 */ 200 typedef void (tL2CA_CONNECT_PND_CB) (UINT16); 201 202 203 /* Configuration indication callback prototype. Parameters are 204 ** Local CID assigned to the connection 205 ** Pointer to configuration info 206 */ 207 typedef void (tL2CA_CONFIG_IND_CB) (UINT16, tL2CAP_CFG_INFO *); 208 209 210 /* Configuration confirm callback prototype. Parameters are 211 ** Local CID assigned to the connection 212 ** Pointer to configuration info 213 */ 214 typedef void (tL2CA_CONFIG_CFM_CB) (UINT16, tL2CAP_CFG_INFO *); 215 216 217 /* Disconnect indication callback prototype. Parameters are 218 ** Local CID 219 ** Boolean whether upper layer should ack this 220 */ 221 typedef void (tL2CA_DISCONNECT_IND_CB) (UINT16, BOOLEAN); 222 223 224 /* Disconnect confirm callback prototype. Parameters are 225 ** Local CID 226 ** Result 227 */ 228 typedef void (tL2CA_DISCONNECT_CFM_CB) (UINT16, UINT16); 229 230 231 /* QOS Violation indication callback prototype. Parameters are 232 ** BD Address of violating device 233 */ 234 typedef void (tL2CA_QOS_VIOLATION_IND_CB) (BD_ADDR); 235 236 237 /* Data received indication callback prototype. Parameters are 238 ** Local CID 239 ** Address of buffer 240 */ 241 typedef void (tL2CA_DATA_IND_CB) (UINT16, BT_HDR *); 242 243 244 /* Echo response callback prototype. Note that this is not included in the 245 ** registration information, but is passed to L2CAP as part of the API to 246 ** actually send an echo request. Parameters are 247 ** Result 248 */ 249 typedef void (tL2CA_ECHO_RSP_CB) (UINT16); 250 251 252 /* Callback function prototype to pass broadcom specific echo response */ 253 /* to the upper layer */ 254 typedef void (tL2CA_ECHO_DATA_CB) (BD_ADDR, UINT16, UINT8 *); 255 256 257 /* Congestion status callback protype. This callback is optional. If 258 ** an application tries to send data when the transmit queue is full, 259 ** the data will anyways be dropped. The parameter is: 260 ** Local CID 261 ** TRUE if congested, FALSE if uncongested 262 */ 263 typedef void (tL2CA_CONGESTION_STATUS_CB) (UINT16, BOOLEAN); 264 265 /* Callback prototype for number of packets completed events. 266 ** This callback notifies the application when Number of Completed Packets 267 ** event has been received. 268 ** This callback is originally designed for 3DG devices. 269 ** The parameter is: 270 ** peer BD_ADDR 271 */ 272 typedef void (tL2CA_NOCP_CB) (BD_ADDR); 273 274 /* Transmit complete callback protype. This callback is optional. If 275 ** set, L2CAP will call it when packets are sent or flushed. If the 276 ** count is 0xFFFF, it means all packets are sent for that CID (eRTM 277 ** mode only). The parameters are: 278 ** Local CID 279 ** Number of SDUs sent or dropped 280 */ 281 typedef void (tL2CA_TX_COMPLETE_CB) (UINT16, UINT16); 282 283 /* Define the structure that applications use to register with 284 ** L2CAP. This structure includes callback functions. All functions 285 ** MUST be provided, with the exception of the "connect pending" 286 ** callback and "congestion status" callback. 287 */ 288 typedef struct 289 { 290 tL2CA_CONNECT_IND_CB *pL2CA_ConnectInd_Cb; 291 tL2CA_CONNECT_CFM_CB *pL2CA_ConnectCfm_Cb; 292 tL2CA_CONNECT_PND_CB *pL2CA_ConnectPnd_Cb; 293 tL2CA_CONFIG_IND_CB *pL2CA_ConfigInd_Cb; 294 tL2CA_CONFIG_CFM_CB *pL2CA_ConfigCfm_Cb; 295 tL2CA_DISCONNECT_IND_CB *pL2CA_DisconnectInd_Cb; 296 tL2CA_DISCONNECT_CFM_CB *pL2CA_DisconnectCfm_Cb; 297 tL2CA_QOS_VIOLATION_IND_CB *pL2CA_QoSViolationInd_Cb; 298 tL2CA_DATA_IND_CB *pL2CA_DataInd_Cb; 299 tL2CA_CONGESTION_STATUS_CB *pL2CA_CongestionStatus_Cb; 300 tL2CA_TX_COMPLETE_CB *pL2CA_TxComplete_Cb; 301 302 } tL2CAP_APPL_INFO; 303 304 /* Define the structure that applications use to create or accept 305 ** connections with enhanced retransmission mode. 306 */ 307 typedef struct 308 { 309 UINT8 preferred_mode; 310 UINT8 allowed_modes; 311 UINT8 user_rx_pool_id; 312 UINT8 user_tx_pool_id; 313 UINT8 fcr_rx_pool_id; 314 UINT8 fcr_tx_pool_id; 315 316 } tL2CAP_ERTM_INFO; 317 318 #define L2CA_REGISTER(a,b,c) L2CA_Register(a,(tL2CAP_APPL_INFO *)b) 319 #define L2CA_DEREGISTER(a) L2CA_Deregister(a) 320 #define L2CA_CONNECT_REQ(a,b,c,d) L2CA_ErtmConnectReq(a,b,c) 321 #define L2CA_CONNECT_RSP(a,b,c,d,e,f,g) L2CA_ErtmConnectRsp(a,b,c,d,e,f) 322 #define L2CA_CONFIG_REQ(a,b) L2CA_ConfigReq(a,b) 323 #define L2CA_CONFIG_RSP(a,b) L2CA_ConfigRsp(a,b) 324 #define L2CA_DISCONNECT_REQ(a) L2CA_DisconnectReq(a) 325 #define L2CA_DISCONNECT_RSP(a) L2CA_DisconnectRsp(a) 326 #define L2CA_DATA_WRITE(a, b) L2CA_DataWrite(a, b) 327 328 /***************************************************************************** 329 ** External Function Declarations 330 *****************************************************************************/ 331 #ifdef __cplusplus 332 extern "C" 333 { 334 #endif 335 336 /******************************************************************************* 337 ** 338 ** Function L2CA_Register 339 ** 340 ** Description Other layers call this function to register for L2CAP 341 ** services. 342 ** 343 ** Returns PSM to use or zero if error. Typically, the PSM returned 344 ** is the same as was passed in, but for an outgoing-only 345 ** connection to a dynamic PSM, a "virtual" PSM is returned 346 ** and should be used in the calls to L2CA_ConnectReq() and 347 ** BTM_SetSecurityLevel(). 348 ** 349 *******************************************************************************/ 350 L2C_API extern UINT16 L2CA_Register (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info); 351 352 /******************************************************************************* 353 ** 354 ** Function L2CA_Deregister 355 ** 356 ** Description Other layers call this function to deregister for L2CAP 357 ** services. 358 ** 359 ** Returns void 360 ** 361 *******************************************************************************/ 362 L2C_API extern void L2CA_Deregister (UINT16 psm); 363 364 /******************************************************************************* 365 ** 366 ** Function L2CA_AllocatePSM 367 ** 368 ** Description Other layers call this function to find an unused PSM for L2CAP 369 ** services. 370 ** 371 ** Returns PSM to use. 372 ** 373 *******************************************************************************/ 374 L2C_API extern UINT16 L2CA_AllocatePSM(void); 375 376 /******************************************************************************* 377 ** 378 ** Function L2CA_ConnectReq 379 ** 380 ** Description Higher layers call this function to create an L2CAP connection. 381 ** Note that the connection is not established at this time, but 382 ** connection establishment gets started. The callback function 383 ** will be invoked when connection establishes or fails. 384 ** 385 ** Returns the CID of the connection, or 0 if it failed to start 386 ** 387 *******************************************************************************/ 388 L2C_API extern UINT16 L2CA_ConnectReq (UINT16 psm, BD_ADDR p_bd_addr); 389 390 /******************************************************************************* 391 ** 392 ** Function L2CA_ConnectRsp 393 ** 394 ** Description Higher layers call this function to accept an incoming 395 ** L2CAP connection, for which they had gotten an connect 396 ** indication callback. 397 ** 398 ** Returns TRUE for success, FALSE for failure 399 ** 400 *******************************************************************************/ 401 L2C_API extern BOOLEAN L2CA_ConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, 402 UINT16 result, UINT16 status); 403 404 /******************************************************************************* 405 ** 406 ** Function L2CA_ErtmConnectReq 407 ** 408 ** Description Higher layers call this function to create an L2CAP connection 409 ** that needs to use Enhanced Retransmission Mode. 410 ** Note that the connection is not established at this time, but 411 ** connection establishment gets started. The callback function 412 ** will be invoked when connection establishes or fails. 413 ** 414 ** Returns the CID of the connection, or 0 if it failed to start 415 ** 416 *******************************************************************************/ 417 L2C_API extern UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr, 418 tL2CAP_ERTM_INFO *p_ertm_info); 419 420 /******************************************************************************* 421 ** 422 ** Function L2CA_ErtmConnectRsp 423 ** 424 ** Description Higher layers call this function to accept an incoming 425 ** L2CAP connection, for which they had gotten an connect 426 ** indication callback, and for which the higher layer wants 427 ** to use Enhanced Retransmission Mode. 428 ** 429 ** Returns TRUE for success, FALSE for failure 430 ** 431 *******************************************************************************/ 432 L2C_API extern BOOLEAN L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, 433 UINT16 result, UINT16 status, 434 tL2CAP_ERTM_INFO *p_ertm_info); 435 436 /******************************************************************************* 437 ** 438 ** Function L2CA_ConfigReq 439 ** 440 ** Description Higher layers call this function to send configuration. 441 ** 442 ** Returns TRUE if configuration sent, else FALSE 443 ** 444 *******************************************************************************/ 445 L2C_API extern BOOLEAN L2CA_ConfigReq (UINT16 cid, tL2CAP_CFG_INFO *p_cfg); 446 447 /******************************************************************************* 448 ** 449 ** Function L2CA_ConfigRsp 450 ** 451 ** Description Higher layers call this function to send a configuration 452 ** response. 453 ** 454 ** Returns TRUE if configuration response sent, else FALSE 455 ** 456 *******************************************************************************/ 457 L2C_API extern BOOLEAN L2CA_ConfigRsp (UINT16 cid, tL2CAP_CFG_INFO *p_cfg); 458 459 /******************************************************************************* 460 ** 461 ** Function L2CA_DisconnectReq 462 ** 463 ** Description Higher layers call this function to disconnect a channel. 464 ** 465 ** Returns TRUE if disconnect sent, else FALSE 466 ** 467 *******************************************************************************/ 468 L2C_API extern BOOLEAN L2CA_DisconnectReq (UINT16 cid); 469 470 /******************************************************************************* 471 ** 472 ** Function L2CA_DisconnectRsp 473 ** 474 ** Description Higher layers call this function to acknowledge the 475 ** disconnection of a channel. 476 ** 477 ** Returns void 478 ** 479 *******************************************************************************/ 480 L2C_API extern BOOLEAN L2CA_DisconnectRsp (UINT16 cid); 481 482 /******************************************************************************* 483 ** 484 ** Function L2CA_DataWrite 485 ** 486 ** Description Higher layers call this function to write data. 487 ** 488 ** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE 489 ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested 490 ** L2CAP_DW_FAILED, if error 491 ** 492 *******************************************************************************/ 493 L2C_API extern UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data); 494 495 /******************************************************************************* 496 ** 497 ** Function L2CA_Ping 498 ** 499 ** Description Higher layers call this function to send an echo request. 500 ** 501 ** Returns TRUE if echo request sent, else FALSE. 502 ** 503 *******************************************************************************/ 504 L2C_API extern BOOLEAN L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_cb); 505 506 /******************************************************************************* 507 ** 508 ** Function L2CA_Echo 509 ** 510 ** Description Higher layers call this function to send an echo request 511 ** with application-specific data. 512 ** 513 ** Returns TRUE if echo request sent, else FALSE. 514 ** 515 *******************************************************************************/ 516 L2C_API extern BOOLEAN L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback); 517 518 /******************************************************************************* 519 ** 520 ** Function L2CA_SetIdleTimeout 521 ** 522 ** Description Higher layers call this function to set the idle timeout for 523 ** a connection, or for all future connections. The "idle timeout" 524 ** is the amount of time that a connection can remain up with 525 ** no L2CAP channels on it. A timeout of zero means that the 526 ** connection will be torn down immediately when the last channel 527 ** is removed. A timeout of 0xFFFF means no timeout. Values are 528 ** in seconds. 529 ** 530 ** Returns TRUE if command succeeded, FALSE if failed 531 ** 532 *******************************************************************************/ 533 L2C_API extern BOOLEAN L2CA_SetIdleTimeout (UINT16 cid, UINT16 timeout, 534 BOOLEAN is_global); 535 536 /******************************************************************************* 537 ** 538 ** Function L2CA_SetIdleTimeoutByBdAddr 539 ** 540 ** Description Higher layers call this function to set the idle timeout for 541 ** a connection. The "idle timeout" is the amount of time that 542 ** a connection can remain up with no L2CAP channels on it. 543 ** A timeout of zero means that the connection will be torn 544 ** down immediately when the last channel is removed. 545 ** A timeout of 0xFFFF means no timeout. Values are in seconds. 546 ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, 547 ** then the idle timeouts for all active l2cap links will be 548 ** changed. 549 ** 550 ** Returns TRUE if command succeeded, FALSE if failed 551 ** 552 ** NOTE This timeout applies to all logical channels active on the 553 ** ACL link. 554 *******************************************************************************/ 555 L2C_API extern BOOLEAN L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, UINT16 timeout); 556 557 /******************************************************************************* 558 ** 559 ** Function L2CA_SetTraceLevel 560 ** 561 ** Description This function sets the trace level for L2CAP. If called with 562 ** a value of 0xFF, it simply reads the current trace level. 563 ** 564 ** Returns the new (current) trace level 565 ** 566 *******************************************************************************/ 567 L2C_API extern UINT8 L2CA_SetTraceLevel (UINT8 trace_level); 568 569 /******************************************************************************* 570 ** 571 ** Function L2CA_SetDesireRole 572 ** 573 ** Description This function sets the desire role for L2CAP. 574 ** If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on 575 ** HciCreateConnection. 576 ** If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on 577 ** HciCreateConnection. 578 ** 579 ** If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE), 580 ** the desire role is set to the new value. Otherwise, it is not changed. 581 ** 582 ** Returns the new (current) role 583 ** 584 *******************************************************************************/ 585 L2C_API extern UINT8 L2CA_SetDesireRole (UINT8 new_role); 586 587 /******************************************************************************* 588 ** 589 ** Function L2CA_LocalLoopbackReq 590 ** 591 ** Description This function sets up a CID for local loopback 592 ** 593 ** Returns CID of 0 if none. 594 ** 595 *******************************************************************************/ 596 L2C_API extern UINT16 L2CA_LocalLoopbackReq (UINT16 psm, UINT16 handle, BD_ADDR p_bd_addr); 597 598 /******************************************************************************* 599 ** 600 ** Function L2CA_FlushChannel 601 ** 602 ** Description This function flushes none, some or all buffers queued up 603 ** for xmission for a particular CID. If called with 604 ** L2CAP_FLUSH_CHANS_GET (0), it simply returns the number 605 ** of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff) 606 ** flushes all buffers. All other values specifies the maximum 607 ** buffers to flush. 608 ** 609 ** Returns Number of buffers left queued for that CID 610 ** 611 *******************************************************************************/ 612 L2C_API extern UINT16 L2CA_FlushChannel (UINT16 lcid, UINT16 num_to_flush); 613 614 615 /******************************************************************************* 616 ** 617 ** Function L2CA_SetAclPriority 618 ** 619 ** Description Sets the transmission priority for an ACL channel. 620 ** (For initial implementation only two values are valid. 621 ** L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH). 622 ** 623 ** Returns TRUE if a valid channel, else FALSE 624 ** 625 *******************************************************************************/ 626 L2C_API extern BOOLEAN L2CA_SetAclPriority (BD_ADDR bd_addr, UINT8 priority); 627 628 /******************************************************************************* 629 ** 630 ** Function L2CA_FlowControl 631 ** 632 ** Description Higher layers call this function to flow control a channel. 633 ** 634 ** data_enabled - TRUE data flows, FALSE data is stopped 635 ** 636 ** Returns TRUE if valid channel, else FALSE 637 ** 638 *******************************************************************************/ 639 L2C_API extern BOOLEAN L2CA_FlowControl (UINT16 cid, BOOLEAN data_enabled); 640 641 /******************************************************************************* 642 ** 643 ** Function L2CA_SendTestSFrame 644 ** 645 ** Description Higher layers call this function to send a test S-frame. 646 ** 647 ** Returns TRUE if valid Channel, else FALSE 648 ** 649 *******************************************************************************/ 650 L2C_API extern BOOLEAN L2CA_SendTestSFrame (UINT16 cid, UINT8 sup_type, 651 UINT8 back_track); 652 653 /******************************************************************************* 654 ** 655 ** Function L2CA_SetTxPriority 656 ** 657 ** Description Sets the transmission priority for a channel. (FCR Mode) 658 ** 659 ** Returns TRUE if a valid channel, else FALSE 660 ** 661 *******************************************************************************/ 662 L2C_API extern BOOLEAN L2CA_SetTxPriority (UINT16 cid, tL2CAP_CHNL_PRIORITY priority); 663 664 /******************************************************************************* 665 ** 666 ** Function L2CA_RegForNoCPEvt 667 ** 668 ** Description Register callback for Number of Completed Packets event. 669 ** 670 ** Input Param p_cb - callback for Number of completed packets event 671 ** p_bda - BT address of remote device 672 ** 673 ** Returns 674 ** 675 *******************************************************************************/ 676 L2C_API extern BOOLEAN L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda); 677 678 /******************************************************************************* 679 ** 680 ** Function L2CA_SetChnlDataRate 681 ** 682 ** Description Sets the tx/rx data rate for a channel. 683 ** 684 ** Returns TRUE if a valid channel, else FALSE 685 ** 686 *******************************************************************************/ 687 L2C_API extern BOOLEAN L2CA_SetChnlDataRate (UINT16 cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx); 688 689 typedef void (tL2CA_RESERVE_CMPL_CBACK) (void); 690 691 /******************************************************************************* 692 ** 693 ** Function L2CA_SetFlushTimeout 694 ** 695 ** Description This function set the automatic flush time out in Baseband 696 ** for ACL-U packets. 697 ** BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY 698 ** then the flush time out will be applied to all ACL link. 699 ** FlushTimeout: flush time out in ms 700 ** 0x0000 : No automatic flush 701 ** L2CAP_NO_RETRANSMISSION : No retransmission 702 ** 0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5) 703 ** <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot). 704 ** Otherwise, return FALSE. 705 ** L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush 706 ** 707 ** Returns TRUE if command succeeded, FALSE if failed 708 ** 709 ** NOTE This flush timeout applies to all logical channels active on the 710 ** ACL link. 711 *******************************************************************************/ 712 L2C_API extern BOOLEAN L2CA_SetFlushTimeout (BD_ADDR bd_addr, UINT16 flush_tout); 713 714 /******************************************************************************* 715 ** 716 ** Function L2CA_DataWriteEx 717 ** 718 ** Description Higher layers call this function to write data with extended 719 ** flags. 720 ** flags : L2CAP_FLUSHABLE_CH_BASED 721 ** L2CAP_FLUSHABLE_PKT 722 ** L2CAP_NON_FLUSHABLE_PKT 723 ** 724 ** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE 725 ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested 726 ** L2CAP_DW_FAILED, if error 727 ** 728 *******************************************************************************/ 729 L2C_API extern UINT8 L2CA_DataWriteEx (UINT16 cid, BT_HDR *p_data, UINT16 flags); 730 731 /******************************************************************************* 732 ** 733 ** Function L2CA_SetChnlFlushability 734 ** 735 ** Description Higher layers call this function to set a channels 736 ** flushability flags 737 ** 738 ** Returns TRUE if CID found, else FALSE 739 ** 740 *******************************************************************************/ 741 L2C_API extern BOOLEAN L2CA_SetChnlFlushability (UINT16 cid, BOOLEAN is_flushable); 742 743 /******************************************************************************* 744 ** 745 ** Function L2CA_GetPeerFeatures 746 ** 747 ** Description Get a peers features and fixed channel map 748 ** 749 ** Parameters: BD address of the peer 750 ** Pointers to features and channel mask storage area 751 ** 752 ** Return value: TRUE if peer is connected 753 ** 754 *******************************************************************************/ 755 L2C_API extern BOOLEAN L2CA_GetPeerFeatures (BD_ADDR bd_addr, UINT32 *p_ext_feat, UINT8 *p_chnl_mask); 756 757 /******************************************************************************* 758 ** 759 ** Function L2CA_GetBDAddrbyHandle 760 ** 761 ** Description Get BD address for the given HCI handle 762 ** 763 ** Parameters: HCI handle 764 ** BD address of the peer 765 ** 766 ** Return value: TRUE if found lcb for the given handle, FALSE otherwise 767 ** 768 *******************************************************************************/ 769 L2C_API extern BOOLEAN L2CA_GetBDAddrbyHandle (UINT16 handle, BD_ADDR bd_addr); 770 771 /******************************************************************************* 772 ** 773 ** Function L2CA_GetChnlFcrMode 774 ** 775 ** Description Get the channel FCR mode 776 ** 777 ** Parameters: Local CID 778 ** 779 ** Return value: Channel mode 780 ** 781 *******************************************************************************/ 782 L2C_API extern UINT8 L2CA_GetChnlFcrMode (UINT16 lcid); 783 784 785 /******************************************************************************* 786 ** 787 ** UCD callback prototypes 788 ** 789 *******************************************************************************/ 790 791 /* UCD discovery. Parameters are 792 ** BD Address of remote 793 ** Data Type 794 ** Data 795 */ 796 #define L2CAP_UCD_INFO_TYPE_RECEPTION 0x01 797 #define L2CAP_UCD_INFO_TYPE_MTU 0x02 798 799 typedef void (tL2CA_UCD_DISCOVER_CB) (BD_ADDR, UINT8, UINT32); 800 801 /* UCD data received. Parameters are 802 ** BD Address of remote 803 ** Pointer to buffer with data 804 */ 805 typedef void (tL2CA_UCD_DATA_CB) (BD_ADDR, BT_HDR *); 806 807 /* Congestion status callback protype. This callback is optional. If 808 ** an application tries to send data when the transmit queue is full, 809 ** the data will anyways be dropped. The parameter is: 810 ** remote BD_ADDR 811 ** TRUE if congested, FALSE if uncongested 812 */ 813 typedef void (tL2CA_UCD_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN); 814 815 /* UCD registration info (the callback addresses and PSM) 816 */ 817 typedef struct 818 { 819 tL2CA_UCD_DISCOVER_CB *pL2CA_UCD_Discover_Cb; 820 tL2CA_UCD_DATA_CB *pL2CA_UCD_Data_Cb; 821 tL2CA_UCD_CONGESTION_STATUS_CB *pL2CA_UCD_Congestion_Status_Cb; 822 } tL2CAP_UCD_CB_INFO; 823 824 /******************************************************************************* 825 ** 826 ** Function L2CA_UcdRegister 827 ** 828 ** Description Register PSM on UCD. 829 ** 830 ** Parameters: tL2CAP_UCD_CB_INFO 831 ** 832 ** Return value: TRUE if successs 833 ** 834 *******************************************************************************/ 835 L2C_API extern BOOLEAN L2CA_UcdRegister ( UINT16 psm, tL2CAP_UCD_CB_INFO *p_cb_info ); 836 837 /******************************************************************************* 838 ** 839 ** Function L2CA_UcdDeregister 840 ** 841 ** Description Deregister PSM on UCD. 842 ** 843 ** Parameters: PSM 844 ** 845 ** Return value: TRUE if successs 846 ** 847 *******************************************************************************/ 848 L2C_API extern BOOLEAN L2CA_UcdDeregister ( UINT16 psm ); 849 850 /******************************************************************************* 851 ** 852 ** Function L2CA_UcdDiscover 853 ** 854 ** Description Discover UCD of remote device. 855 ** 856 ** Parameters: PSM 857 ** BD_ADDR of remote device 858 ** info_type : L2CAP_UCD_INFO_TYPE_RECEPTION 859 ** L2CAP_UCD_INFO_TYPE_MTU 860 ** 861 ** 862 ** Return value: TRUE if successs 863 ** 864 *******************************************************************************/ 865 L2C_API extern BOOLEAN L2CA_UcdDiscover ( UINT16 psm, BD_ADDR rem_bda, UINT8 info_type ); 866 867 /******************************************************************************* 868 ** 869 ** Function L2CA_UcdDataWrite 870 ** 871 ** Description Send UCD to remote device 872 ** 873 ** Parameters: PSM 874 ** BD Address of remote 875 ** Pointer to buffer of type BT_HDR 876 ** flags : L2CAP_FLUSHABLE_CH_BASED 877 ** L2CAP_FLUSHABLE_PKT 878 ** L2CAP_NON_FLUSHABLE_PKT 879 ** 880 ** Return value L2CAP_DW_SUCCESS, if data accepted 881 ** L2CAP_DW_FAILED, if error 882 ** 883 *******************************************************************************/ 884 L2C_API extern UINT16 L2CA_UcdDataWrite (UINT16 psm, BD_ADDR rem_bda, BT_HDR *p_buf, UINT16 flags); 885 886 /******************************************************************************* 887 ** 888 ** Function L2CA_UcdSetIdleTimeout 889 ** 890 ** Description Set UCD Idle timeout. 891 ** 892 ** Parameters: BD Addr 893 ** Timeout in second 894 ** 895 ** Return value: TRUE if successs 896 ** 897 *******************************************************************************/ 898 L2C_API extern BOOLEAN L2CA_UcdSetIdleTimeout ( BD_ADDR rem_bda, UINT16 timeout ); 899 900 /******************************************************************************* 901 ** 902 ** Function L2CA_UCDSetTxPriority 903 ** 904 ** Description Sets the transmission priority for a connectionless channel. 905 ** 906 ** Returns TRUE if a valid channel, else FALSE 907 ** 908 *******************************************************************************/ 909 L2C_API extern BOOLEAN L2CA_UCDSetTxPriority ( BD_ADDR rem_bda, tL2CAP_CHNL_PRIORITY priority ); 910 911 912 /******************************************************************************* 913 ** 914 ** Fixed Channel callback prototypes 915 ** 916 *******************************************************************************/ 917 918 /* Fixed channel connected and disconnected. Parameters are 919 ** BD Address of remote 920 ** TRUE if channel is connected, FALSE if disconnected 921 ** Reason for connection failure 922 ** transport : physical transport, BR/EDR or LE 923 */ 924 typedef void (tL2CA_FIXED_CHNL_CB) (BD_ADDR, BOOLEAN, UINT16, tBT_TRANSPORT); 925 926 /* Signalling data received. Parameters are 927 ** BD Address of remote 928 ** Pointer to buffer with data 929 */ 930 typedef void (tL2CA_FIXED_DATA_CB) (BD_ADDR, BT_HDR *); 931 932 /* Congestion status callback protype. This callback is optional. If 933 ** an application tries to send data when the transmit queue is full, 934 ** the data will anyways be dropped. The parameter is: 935 ** remote BD_ADDR 936 ** TRUE if congested, FALSE if uncongested 937 */ 938 typedef void (tL2CA_FIXED_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN); 939 940 /* Fixed channel registration info (the callback addresses and channel config) 941 */ 942 typedef struct 943 { 944 tL2CA_FIXED_CHNL_CB *pL2CA_FixedConn_Cb; 945 tL2CA_FIXED_DATA_CB *pL2CA_FixedData_Cb; 946 tL2CA_FIXED_CONGESTION_STATUS_CB *pL2CA_FixedCong_Cb; 947 tL2CAP_FCR_OPTS fixed_chnl_opts; 948 949 UINT16 default_idle_tout; 950 } tL2CAP_FIXED_CHNL_REG; 951 952 953 #if (L2CAP_NUM_FIXED_CHNLS > 0) 954 /******************************************************************************* 955 ** 956 ** Function L2CA_RegisterFixedChannel 957 ** 958 ** Description Register a fixed channel. 959 ** 960 ** Parameters: Fixed Channel # 961 ** Channel Callbacks and config 962 ** 963 ** Return value: TRUE if registered OK 964 ** 965 *******************************************************************************/ 966 L2C_API extern BOOLEAN L2CA_RegisterFixedChannel (UINT16 fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg); 967 968 /******************************************************************************* 969 ** 970 ** Function L2CA_ConnectFixedChnl 971 ** 972 ** Description Connect an fixed signalling channel to a remote device. 973 ** 974 ** Parameters: Fixed CID 975 ** BD Address of remote 976 ** 977 ** Return value: TRUE if connection started 978 ** 979 *******************************************************************************/ 980 L2C_API extern BOOLEAN L2CA_ConnectFixedChnl (UINT16 fixed_cid, BD_ADDR bd_addr); 981 982 /******************************************************************************* 983 ** 984 ** Function L2CA_SendFixedChnlData 985 ** 986 ** Description Write data on a fixed signalling channel. 987 ** 988 ** Parameters: Fixed CID 989 ** BD Address of remote 990 ** Pointer to buffer of type BT_HDR 991 ** 992 ** Return value L2CAP_DW_SUCCESS, if data accepted 993 ** L2CAP_DW_FAILED, if error 994 ** 995 *******************************************************************************/ 996 L2C_API extern UINT16 L2CA_SendFixedChnlData (UINT16 fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf); 997 998 /******************************************************************************* 999 ** 1000 ** Function L2CA_RemoveFixedChnl 1001 ** 1002 ** Description Remove a fixed channel to a remote device. 1003 ** 1004 ** Parameters: Fixed CID 1005 ** BD Address of remote 1006 ** Idle timeout to use (or 0xFFFF if don't care) 1007 ** 1008 ** Return value: TRUE if channel removed 1009 ** 1010 *******************************************************************************/ 1011 L2C_API extern BOOLEAN L2CA_RemoveFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda); 1012 1013 /******************************************************************************* 1014 ** 1015 ** Function L2CA_SetFixedChannelTout 1016 ** 1017 ** Description Higher layers call this function to set the idle timeout for 1018 ** a fixed channel. The "idle timeout" is the amount of time that 1019 ** a connection can remain up with no L2CAP channels on it. 1020 ** A timeout of zero means that the connection will be torn 1021 ** down immediately when the last channel is removed. 1022 ** A timeout of 0xFFFF means no timeout. Values are in seconds. 1023 ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, 1024 ** then the idle timeouts for all active l2cap links will be 1025 ** changed. 1026 ** 1027 ** Returns TRUE if command succeeded, FALSE if failed 1028 ** 1029 *******************************************************************************/ 1030 L2C_API extern BOOLEAN L2CA_SetFixedChannelTout (BD_ADDR rem_bda, UINT16 fixed_cid, UINT16 idle_tout); 1031 1032 #endif /* (L2CAP_NUM_FIXED_CHNLS > 0) */ 1033 1034 /******************************************************************************* 1035 ** 1036 ** Function L2CA_GetCurrentConfig 1037 ** 1038 ** Description This function returns configurations of L2CAP channel 1039 ** pp_our_cfg : pointer of our saved configuration options 1040 ** p_our_cfg_bits : valid config in bitmap 1041 ** pp_peer_cfg: pointer of peer's saved configuration options 1042 ** p_peer_cfg_bits : valid config in bitmap 1043 ** 1044 ** Returns TRUE if successful 1045 ** 1046 *******************************************************************************/ 1047 L2C_API extern BOOLEAN L2CA_GetCurrentConfig (UINT16 lcid, 1048 tL2CAP_CFG_INFO **pp_our_cfg, tL2CAP_CH_CFG_BITS *p_our_cfg_bits, 1049 tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits); 1050 1051 #if (L2CAP_CORRUPT_ERTM_PKTS == TRUE) 1052 /******************************************************************************* 1053 ** 1054 ** Function L2CA_SetupErtmTest 1055 ** 1056 ** Description This function is used for testing purposes only. 1057 ** It corrupts or drops one or more packets used with ERTM channels. 1058 ** 1059 ** Parameters 1060 ** cid - channel ID (0 uses RFCOMM PSM's CID) 1061 ** 1062 ** type - type of test to run (L2CAP_FCR_TTYPE_CORR_IFRAMES 1063 ** L2CAP_FCR_TTYPE_CORR_SFRAME 1064 ** L2CAP_FCR_TTYPE_STOP_TEST 1065 ** L2CAP_FCR_TTYPE_GET_CID - returns rfcomm cid only) 1066 ** 1067 ** is_rx - TRUE to corrupt Rx packet, FALSE for Tx packet) 1068 ** 1069 ** freq - L2CAP_FCR_FREQ_RANDOM (turns on random corruptions/drops) 1070 ** L2CAP_FCR_FREQ_NORMAL (turns on test with "count" corruptions/drops) 1071 ** 1072 ** count - number of packets in a row to drop or corrupt 1073 ** 1074 ** Returns CID of channel running test 1075 ** 1076 *******************************************************************************/ 1077 L2C_API extern UINT16 L2CA_SetupErtmTest (UINT16 cid, UINT8 type, BOOLEAN is_rx, UINT8 freq, UINT16 count); 1078 1079 /******************************************************************************* 1080 ** 1081 ** Function L2CA_SendPolledSFrame 1082 ** 1083 ** Description This function is used for testing purposes only. 1084 ** It Sends a Polled RR or RNR to the peer 1085 ** 1086 ** Parameters 1087 ** cid - channel ID 1088 ** 1089 ** sup_type - (L2CAP_FCR_SUP_RR or L2CAP_FCR_SUP_RNR) 1090 ** 1091 ** Returns void 1092 ** 1093 *******************************************************************************/ 1094 L2C_API extern void L2CA_SendPolledSFrame (UINT16 cid, UINT16 sup_type); 1095 1096 /******************************************************************************* 1097 ** 1098 ** Function L2CA_BypassSFrame 1099 ** 1100 ** Description This function is used for testing purposes only. 1101 ** It skips sending 'count' S-Frames. 1102 ** 1103 ** Parameters 1104 ** cid - channel ID 1105 ** 1106 ** count - Number of S-Frames to skip sending 1107 ** 1108 ** Returns void 1109 ** 1110 *******************************************************************************/ 1111 L2C_API extern void L2CA_BypassSFrame (UINT16 cid, UINT8 count); 1112 1113 #endif /* (L2CAP_CORRUPT_ERTM_PKTS == TRUE) */ 1114 1115 1116 #if (BLE_INCLUDED == TRUE) 1117 /******************************************************************************* 1118 ** 1119 ** Function L2CA_CancelBleConnectReq 1120 ** 1121 ** Description Cancel a pending connection attempt to a BLE device. 1122 ** 1123 ** Parameters: BD Address of remote 1124 ** 1125 ** Return value: TRUE if connection was cancelled 1126 ** 1127 *******************************************************************************/ 1128 L2C_API extern BOOLEAN L2CA_CancelBleConnectReq (BD_ADDR rem_bda); 1129 1130 /******************************************************************************* 1131 ** 1132 ** Function L2CA_UpdateBleConnParams 1133 ** 1134 ** Description Update BLE connection parameters. 1135 ** 1136 ** Parameters: BD Address of remote 1137 ** 1138 ** Return value: TRUE if update started 1139 ** 1140 *******************************************************************************/ 1141 L2C_API extern BOOLEAN L2CA_UpdateBleConnParams (BD_ADDR rem_bdRa, UINT16 min_int, 1142 UINT16 max_int, UINT16 latency, UINT16 timeout); 1143 1144 /******************************************************************************* 1145 ** 1146 ** Function L2CA_EnableUpdateBleConnParams 1147 ** 1148 ** Description Update BLE connection parameters. 1149 ** 1150 ** Parameters: BD Address of remote 1151 ** enable flag 1152 ** 1153 ** Return value: TRUE if update started 1154 ** 1155 *******************************************************************************/ 1156 L2C_API extern BOOLEAN L2CA_EnableUpdateBleConnParams (BD_ADDR rem_bda, BOOLEAN enable); 1157 1158 /******************************************************************************* 1159 ** 1160 ** Function L2CA_GetBleConnRole 1161 ** 1162 ** Description This function returns the connection role. 1163 ** 1164 ** Returns link role. 1165 ** 1166 *******************************************************************************/ 1167 L2C_API extern UINT8 L2CA_GetBleConnRole (BD_ADDR bd_addr); 1168 1169 /******************************************************************************* 1170 ** 1171 ** Function L2CA_GetDisconnectReason 1172 ** 1173 ** Description This function returns the disconnect reason code. 1174 ** 1175 ** Parameters: BD Address of remote 1176 ** Physical transport for the L2CAP connection (BR/EDR or LE) 1177 ** 1178 ** Returns disconnect reason 1179 ** 1180 *******************************************************************************/ 1181 L2C_API extern UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda, tBT_TRANSPORT transport); 1182 1183 #endif /* (BLE_INCLUDED == TRUE) */ 1184 1185 #ifdef __cplusplus 1186 } 1187 #endif 1188 1189 #endif /* L2C_API_H */ 1190
