1 /* 2 * Copyright (C) 2010 NXP Semiconductors 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 /** 18 * \file phFriNfc_NdefMap.h 19 * \brief NFC Ndef Mapping For Different Smart Cards. 20 * 21 * Project: NFC-FRI 22 * 23 * $Date: Mon Dec 13 14:14:14 2010 $ 24 * $Author: ing02260 $ 25 * $Revision: 1.25 $ 26 * $Aliases: $ 27 * 28 */ 29 30 #ifndef PHFRINFC_NDEFMAP_H 31 #define PHFRINFC_NDEFMAP_H 32 33 34 /*include files*/ 35 #include <phNfcTypes.h> 36 #include <phNfcStatus.h> 37 #include <phFriNfc.h> 38 #ifdef PH_HAL4_ENABLE 39 #include <phHal4Nfc.h> 40 #else 41 #include <phHalNfc.h> 42 #endif 43 44 45 #include <phFriNfc_OvrHal.h> 46 47 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 48 49 /** 50 * \name NDEF Mapping 51 * 52 * File: \ref phFriNfc_NdefMap.h 53 * 54 */ 55 /*@{*/ 56 #define PH_FRINFC_NDEFMAP_FILEREVISION "$Revision: 1.25 $" /**< \ingroup grp_file_attributes */ 57 #define PH_FRINFC_NDEFMAP_FILEALIASES "$Aliases: $" /**< \ingroup grp_file_attributes */ 58 /*@}*/ 59 60 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 61 62 63 /** \defgroup grp_fri_nfc_ndef_map NDEF Mapping Component 64 * 65 * This component implements the read/write/check NDEF functions for remote devices. 66 * NDEF data, as defined by the NFC Forum NDEF specification are written to or read from 67 * a remote device that can be a smart- or memory card. \n\n 68 * Please notice that the NDEF mapping command sequence must 69 * be \b contiguous (after correct initialisation): \n 70 * \b Examples: 71 * - Checking and Reading 72 * - \ref phFriNfc_NdefMap_ChkNdef 73 * - \ref phFriNfc_NdefMap_RdNdef 74 * . 75 * - Checking and Writing 76 * - \ref phFriNfc_NdefMap_ChkNdef 77 * - \ref phFriNfc_NdefMap_WrNdef 78 * . 79 * - Checking, Reading and Writing 80 * - \ref phFriNfc_NdefMap_ChkNdef 81 * - \ref phFriNfc_NdefMap_RdNdef 82 * - \ref phFriNfc_NdefMap_WrNdef 83 * . 84 * . 85 * There must be \b no \b other FRI or HAL call between these mapping commands. Exceptions to this 86 * rule are specific to the NDEF mapping of certain card / remote device types and separately noted, 87 * typically for true multi-activation capable devices. 88 * 89 */ 90 91 /** 92 * \name NDEF Mapping - specifies the different card types 93 * These are the only recognised card types in this version. 94 * 95 */ 96 /*@{*/ 97 98 #define DESFIRE_EV1 99 100 #define PH_FRINFC_NDEFMAP_MIFARE_UL_CARD 1 /**< \internal Mifare UL */ 101 #define PH_FRINFC_NDEFMAP_ISO14443_4A_CARD 2 /**< \internal Iso 14443-4A */ 102 #define PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD 3 /**< \internal Mifare Standard */ 103 #define PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD 4 /**< \internal Mifare Standard */ 104 #define PH_FRINFC_NDEFMAP_FELICA_SMART_CARD 5 /**< \internal Felica Smart Tag */ 105 #define PH_FRINFC_NDEFMAP_TOPAZ_CARD 7 /**< \internal Felica Smart Tag */ 106 #define PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD 8 /**< \internal Felica Smart Tag */ 107 #ifdef DESFIRE_EV1 108 #define PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 9 /**< \internal Iso 14443-4A EV1 */ 109 #endif /* #ifdef DESFIRE_EV1 */ 110 111 #define PH_FRINFC_NDEFMAP_ISO15693_CARD 10 /**< \internal ISO 15693 */ 112 113 114 #ifdef PH_NDEF_MIFARE_ULC 115 #define PH_FRINFC_NDEFMAP_MIFARE_ULC_CARD 8 /**< \internal Mifare UL */ 116 #endif /* #ifdef PH_NDEF_MIFARE_ULC */ 117 118 #define PH_FRINFC_NDEFMAP_EMPTY_NDEF_MSG {0xD0, 0x00, 0x00} /**< \internal Empty ndef message */ 119 120 121 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 122 #define PH_FRINFC_NDEFMAP_MOCKUP_CARD 6 /**< \internal Mocup*/ 123 #endif /* PHFRINFC_OVRHAL_MOCKUP */ 124 125 126 127 /* Enum reperesents the different card state*/ 128 typedef enum 129 { 130 PH_NDEFMAP_CARD_STATE_INITIALIZED, 131 PH_NDEFMAP_CARD_STATE_READ_ONLY, 132 PH_NDEFMAP_CARD_STATE_READ_WRITE, 133 PH_NDEFMAP_CARD_STATE_INVALID 134 }phNDEF_CARD_STATE; 135 136 137 /*@}*/ 138 139 140 #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 141 /** 142 * \name NDEF Mapping - specifies the Compliant Blocks in the Mifare 1k and 4k card types 143 * 144 */ 145 /*@{*/ 146 #define PH_FRINFC_NDEFMAP_MIFARESTD_1KNDEF_COMPBLOCK 45 /**< \internal Total Ndef Compliant blocks Mifare 1k */ 147 #define PH_FRINFC_NDEFMAP_MIFARESTD_4KNDEF_COMPBLOCK 210 /**< \internal Total Ndef Compliant blocks Mifare 4k */ 148 #define PH_FRINFC_NDEFMAP_MIFARESTD_RDWR_SIZE 16 /**< \internal Bytes read/write for one read/write operation*/ 149 #define PH_FRINFC_NDEFMAP_MIFARESTD_TOTALNO_BLK 40 /**< \internal Total number of sectors in Mifare 4k */ 150 #define PH_FRINFC_NDEFMAP_MIFARESTD_ST15_BYTES 15 /**< \internal To store 15 bytes after reading a block */ 151 /*@}*/ 152 #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 153 154 #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 155 /** 156 * \name NDEF Mapping - specifies the Compliant Blocks in the Mifare 1k and 4k card types 157 * 158 */ 159 /*@{*/ 160 #define PH_FRINFC_NDEFMAP_TOPAZ_MAX_SIZE 256 /**< \internal Total Memory size = 96 bytes (newer version have mode) */ 161 #define PH_FRINFC_NDEFMAP_TOPAZ_UID_SIZE 0x04 /**< \internal UID size returned by READID command = 4 bytes */ 162 /*@}*/ 163 #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 164 165 #ifndef PH_FRINFC_MAP_FELICA_DISABLED 166 /* Felica Mapping - Constants */ 167 #define PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE 16 168 #define PH_FRINFC_NDEFMAP_FELICA_ATTR_NDEF_DATA_LEN 3 169 #define PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN 8 170 #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 171 172 /* MifareUL/Type2 specific constants*/ 173 #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 174 175 #ifdef PH_NDEF_MIFARE_ULC 176 #define PH_FRINFC_NDEFMAP_MFUL_64BYTES_BUF 2048 /**< \internal To store 2048 bytes after reading entire card */ 177 #else 178 #define PH_FRINFC_NDEFMAP_MFUL_64BYTES_BUF 64 /**< \internal To store 64 bytes after reading entire card */ 179 #endif /*#ifdef PH_NDEF_MIFARE_ULC */ 180 181 #define PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF 4 /**< \internal To store 4 bytes after write */ 182 183 #endif /*#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 184 185 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 186 187 #define PH_FRINFC_NDEFMAP_MOCKUP_4096BYTES_BUF 4096 /**< \internal To store 4 bytes after write */ 188 189 #endif /*#ifndef PH_FRINFC_MAP_MOCKUP_DISABLED*/ 190 191 /** 192 * \name Completion Routine Indices 193 * 194 * These are the indices of the completion routine pointers within the component context. 195 * Completion routines belong to upper components. 196 * 197 */ 198 /*@{*/ 199 /** \ingroup grp_fri_nfc_ndef_map 200 * Completion Routine Index for \ref phFriNfc_NdefMap_ChkNdef */ 201 #define PH_FRINFC_NDEFMAP_CR_CHK_NDEF 0 /* */ 202 /** \ingroup grp_fri_nfc_ndef_map 203 * Completion Routine Index for \ref phFriNfc_NdefMap_RdNdef */ 204 #define PH_FRINFC_NDEFMAP_CR_RD_NDEF 1 /* */ 205 /** \ingroup grp_fri_nfc_ndef_map 206 * Completion Routine Index for \ref phFriNfc_NdefMap_WrNdef */ 207 #define PH_FRINFC_NDEFMAP_CR_WR_NDEF 2 /* */ 208 /** \ingroup grp_fri_nfc_ndef_map 209 * Completion Routine Index for \ref phFriNfc_NdefMap_EraseNdef */ 210 #define PH_FRINFC_NDEFMAP_CR_ERASE_NDEF 3 /* */ 211 /** \ingroup grp_fri_nfc_ndef_map Completion 212 * Routine Index for Unknown States/Operations */ 213 #define PH_FRINFC_NDEFMAP_CR_INVALID_OPE 4 /* */ 214 /** \ingroup grp_fri_nfc_ndef_map 215 * Number of completion routines that have to be initialised */ 216 #define PH_FRINFC_NDEFMAP_CR 5 /* */ 217 /*@}*/ 218 219 /** 220 * \name File Offset Attributes 221 * 222 * Following values are used to determine the offset value for Read/Write. This specifies whether 223 * the Read/Write operation needs to be restarted/continued from the last offset set. 224 * 225 */ 226 /*@{*/ 227 /** \ingroup grp_fri_nfc_ndef_map 228 * Read/Write operation shall start from the last offset set */ 229 #define PH_FRINFC_NDEFMAP_SEEK_CUR 0 /* */ 230 /** \ingroup grp_fri_nfc_ndef_map 231 * Read/Write operation shall start from the begining of the file/card */ 232 #define PH_FRINFC_NDEFMAP_SEEK_BEGIN 1 /* */ 233 /*@}*/ 234 235 236 /** 237 * \name Buffer Size Definitions 238 * 239 */ 240 /*@{*/ 241 /** \ingroup grp_fri_nfc_ndef_map Minimum size of the TRX buffer required */ 242 #define PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE 252 /* */ 243 /** \internal The size of s MIFARE block */ 244 #define PH_FRINFC_NDEFMAP_MF_READ_BLOCK_SIZE 16 /* */ 245 246 247 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 248 249 250 #ifndef PH_FRINFC_MAP_ISO15693_DISABLED 251 252 #define ISO15693_MAX_DATA_TO_STORE 0x04U 253 254 typedef struct phFriNfc_ISO15693Cont 255 { 256 /**< \internal block number that is executed */ 257 uint16_t current_block; 258 /**< \internal The state of the operation */ 259 uint8_t state; 260 /**< \internal Completion routine index */ 261 uint8_t cr_index; 262 /**< \internal Execution sequence */ 263 uint8_t ndef_seq; 264 /**< \internal NDEF TLV size */ 265 uint16_t actual_ndef_size; 266 /**< \internal NDEF TLV size */ 267 uint16_t max_data_size; 268 /**< \internal NDEF TLV TYPE block number */ 269 uint16_t ndef_tlv_type_blk; 270 /**< \internal NDEF TLV TYPE byte number in the 271 "ndef_tlv_type_blk" */ 272 uint8_t ndef_tlv_type_byte; 273 /**< \internal Store the remaining bytes that can be used for 274 READ with continue option */ 275 uint8_t store_read_data[ISO15693_MAX_DATA_TO_STORE]; 276 uint8_t store_length; 277 /**< \internal Remaining size that can be read */ 278 uint16_t remaining_size_to_read; 279 uint8_t read_capabilities; 280 281 282 }phFriNfc_ISO15693Cont_t; 283 284 #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 285 286 287 288 #ifndef PH_FRINFC_MAP_FELICA_DISABLED 289 /** 290 * \ingroup grp_fri_nfc_ndef_map 291 * \brief Felica Basic structure which details the different vaiables 292 * used for Reading/writing. 293 * 294 */ 295 typedef struct phFriNfc_Felica 296 { 297 /**< Current block being read or written*/ 298 uint8_t CurBlockNo; 299 300 /**< No. Of Written*/ 301 uint8_t NoBlocksWritten; 302 303 /**< Following are different variables used for write operation*/ 304 uint8_t Wr_BytesRemained; /* No of bytes to pad*/ 305 306 /**< Buffer to store odd number of block data */ 307 uint8_t Wr_RemainedBytesBuff[PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE]; 308 309 /**< Following are different variables used for read operation*/ 310 uint8_t Rd_NoBytesToCopy; /*specifies the extra number of read bytes */ 311 312 /**< stores extra read data bytes*/ 313 uint8_t Rd_BytesToCopyBuff[PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE]; 314 315 /**< Flag determines Intermediate Copy Operation*/ 316 uint8_t IntermediateCpyFlag; 317 318 /**< Stores Intermediate Copy data len*/ 319 uint8_t IntermediateCpyLen; 320 321 /**< Flag specifies Pad Byte Information*/ 322 uint8_t PadByteFlag; 323 324 /**< Flag specifies Intermediate WR Information*/ 325 uint8_t IntermediateWrFlag; 326 327 /**< Flag specifies Intermediate Rd Information*/ 328 uint8_t IntermediateRdFlag; 329 330 /**< Flag specifies Last Block Reached Information*/ 331 uint8_t LastBlkReachedFlag; 332 333 /**< Specifies how many bytes read from the card*/ 334 uint16_t CurrBytesRead; 335 336 /**< Flag specifies EOF card reached Information*/ 337 uint8_t EofCardReachedFlag; 338 339 /**< Flag specifies different Operation Types*/ 340 uint8_t OpFlag; 341 342 /**< Specifies Offset*/ 343 uint8_t Offset; 344 345 /**< Specifies TrxLen Information*/ 346 uint16_t TrxLen; 347 348 }phFriNfc_Felica_t; 349 350 /** 351 * \ingroup grp_fri_nfc_ndef_map 352 * \brief Felica structure which details the different vaiables 353 * used to store the poll related information. 354 * 355 */ 356 typedef struct phFriNfc_Felica_PollDetails 357 { 358 phHal_sDevInputParam_t *DevInputParam; 359 #ifndef PH_HAL4_ENABLE 360 phHal_eOpModes_t *OpMode; 361 #endif 362 /**< Temporary place holder to the Remote Device 363 Information, required to store the Felica 364 session opened information. */ 365 phHal_sRemoteDevInformation_t psTempRemoteDevInfo; 366 }phFriNfc_Felica_PollDetails_t; 367 368 /** 369 * \ingroup grp_fri_nfc_ndef_map 370 * \brief Felica structure which details the attribute related information. 371 * 372 */ 373 typedef struct phFriNfc_Felica_AttrInfo 374 { 375 /** Version of the Ndefmap document*/ 376 uint8_t Version; 377 /** Nbr for check cmd*/ 378 uint8_t Nbr; 379 /** Nbw for update cmd*/ 380 uint8_t Nbw; 381 /** Maximum number of blocks to store Ndef data*/ 382 uint16_t Nmaxb; 383 /** Flag to indicate the status of the write operation*/ 384 uint8_t WriteFlag; 385 /** Flag to indicate the status of the read/write operation*/ 386 uint8_t RdWrFlag; 387 /** Represents the length of Ndef data : 3 bytes*/ 388 uint8_t LenBytes[PH_FRINFC_NDEFMAP_FELICA_ATTR_NDEF_DATA_LEN]; 389 /** Specifies the ERASE NDEF Message Operation */ 390 uint8_t EraseMsgFlag; 391 392 }phFriNfc_Felica_AttrInfo_t; 393 394 /** 395 * \ingroup grp_fri_nfc_ndef_map 396 * \brief Felica structure which details the different vaiables 397 * used to store the Card Manufacturer details. 398 */ 399 typedef struct phFriNfc_Felica_ManufDetails 400 { 401 /** Manufacture identifier*/ 402 uint8_t ManufID[PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN]; 403 /** Manufacture Parameters*/ 404 uint8_t ManufParameter[PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN]; 405 }phFriNfc_Felica_ManufDetails_t; 406 #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 407 408 #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 409 typedef struct phFriNfc_MifareStdCont 410 { 411 /** Device input parameter for poll and connect after failed authentication */ 412 phHal_sDevInputParam_t *DevInputParam; 413 /** to store bytes that will be used in the 414 next write/read operation, if any */ 415 uint8_t internalBuf[PH_FRINFC_NDEFMAP_MIFARESTD_ST15_BYTES]; 416 /** to Store the length of the internalBuf */ 417 uint16_t internalLength; 418 /** holds the block number which is presently been used */ 419 uint8_t currentBlock; 420 /** the number of Ndef Compliant blocks written/read */ 421 uint8_t NdefBlocks; 422 /** Total Number of Ndef Complaint Blocks */ 423 uint16_t NoOfNdefCompBlocks; 424 /** used in write ndef, to know that internal bytes 425 are accessed */ 426 uint8_t internalBufFlag; 427 /** used in write ndef, to know that last 16 bytes 428 are used to write*/ 429 uint8_t RemainingBufFlag; 430 /** indicates that Read has reached the end of the 431 card */ 432 uint8_t ReadWriteCompleteFlag; 433 /** indicates that Read has reached the end of the 434 card */ 435 uint8_t ReadCompleteFlag; 436 /** indicates that Write is possible or not */ 437 uint8_t WriteFlag; 438 /** indicates that Write is possible or not */ 439 uint8_t ReadFlag; 440 /** indicates that Write is possible or not */ 441 uint8_t RdBeforeWrFlag; 442 /** Authentication Flag indicating that a particular 443 sector is authenticated or not */ 444 uint8_t AuthDone; 445 /** to store the last Sector ID in Check Ndef */ 446 uint8_t SectorIndex; 447 /** to read the access bits of each sector */ 448 uint8_t ReadAcsBitFlag; 449 /** Flag to check if Acs bit was written in this call */ 450 uint8_t WriteAcsBitFlag; 451 /** Buffer to store 16 bytes */ 452 uint8_t Buffer[PH_FRINFC_NDEFMAP_MIFARESTD_RDWR_SIZE]; 453 /** to store the AIDs of Mifare 1k or 4k */ 454 uint8_t aid[PH_FRINFC_NDEFMAP_MIFARESTD_TOTALNO_BLK]; 455 /** flag to write with offset begin */ 456 uint8_t WrNdefFlag; 457 /** flag to read with offset begin */ 458 uint8_t ReadNdefFlag; 459 /** flag to check with offset begin */ 460 uint8_t ChkNdefFlag; 461 /** To store the remaining size of the Mifare 1k or 4k card */ 462 uint16_t remainingSize; 463 /** To update the remaining size when writing to the Mifare 1k or 4k card */ 464 uint8_t remSizeUpdFlag; 465 /** The flag is to know that there is a different AID apart from 466 NFC forum sector AID */ 467 uint16_t aidCompleteFlag; 468 /** The flag is to know that there is a a NFC forum sector exists 469 in the card */ 470 uint16_t NFCforumSectFlag; 471 /** The flag is to know that the particular sector is a proprietary 472 NFC forum sector */ 473 uint16_t ProprforumSectFlag; 474 /** The flag is set after reading the MAD sectors */ 475 uint16_t ChkNdefCompleteFlag; 476 /** Flag to store the current block */ 477 uint8_t TempBlockNo; 478 /** Completion routine index */ 479 uint8_t CRIndex; 480 /** Bytes remaining to write for one write procedure */ 481 uint16_t WrLength; 482 /** Flag to read after write */ 483 uint8_t RdAfterWrFlag; 484 /** Flag to say that poll is required before write ndef (authentication) */ 485 uint8_t PollFlag; 486 /** Flag is to know that this is first time the read has been called. This 487 is required when read is called after write (especially for the card formatted 488 with the 2nd configuration) */ 489 uint8_t FirstReadFlag; 490 /** Flag is to know that this is first time the write has been called. This 491 is required when the card formatted with the 3rd configuration */ 492 uint8_t FirstWriteFlag; 493 /** Indicates the sector trailor id for which the convert 494 to read only is currently in progress*/ 495 uint8_t ReadOnlySectorIndex; 496 /** Indicates the total number of sectors on the card */ 497 uint8_t TotalNoSectors; 498 /** Indicates the block number of the sector trailor on the card */ 499 uint8_t SectorTrailerBlockNo; 500 /** Secret key B to given by the application */ 501 uint8_t UserScrtKeyB[6]; 502 }phFriNfc_MifareStdCont_t; 503 /*@}*/ 504 #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 505 506 #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 507 /** 508 * \ingroup grp_fri_nfc_ndef_map 509 * \brief Capability Container. 510 * 511 * The Capability Container structure required for smart card operations. 512 * 513 */ 514 typedef struct phFriNfc_DesfireCapCont 515 { 516 uint16_t DesfVersion; /**< \internal Desfire Version . */ 517 uint16_t NdefMsgFid; /**< \internal Ndef Message file pointer*/ 518 uint16_t NdefFileSize; /**< \internal Holds Desfire File Size */ 519 uint8_t ReadAccess; /**< \internal Read Access Information. */ 520 uint8_t WriteAccess; /**< \internal Write Access Information. */ 521 uint16_t MaxRespSize; /**< \internal Maximum expected response size. */ 522 uint16_t MaxCmdSize; /**< \internal Maximum command size. */ 523 uint16_t NdefDataLen; /**< \internal Holds actual NDEF Data Len.*/ 524 uint8_t IsNlenPresentFlag; /**< \internal specifies NLEN presence .*/ 525 uint8_t SkipNlenBytesFlag; /**< \internal sets on presence of NLEN.*/ 526 } phFriNfc_DesfireCapCont_t; 527 #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 528 529 #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 530 /** 531 * \ingroup grp_fri_nfc_ndef_map 532 * \brief Mifare UL Basic structure which details the different vaiables 533 * used for Reading/writing. 534 * 535 */ 536 typedef struct phFriNfc_MifareULCont 537 { 538 /** to store bytes that will be used in the 539 next write/read operation, if any */ 540 uint8_t InternalBuf[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 541 /** to Store the length of the internalBuf */ 542 uint16_t InternalLength; 543 /** holds the sector number which is presently been used */ 544 uint8_t CurrentSector; 545 /** holds the block number which is presently been used */ 546 uint8_t CurrentBlock; 547 /** to know the completion routine */ 548 uint8_t CRindex; 549 /** This stores the free memory size left in the card */ 550 uint16_t RemainingSize; 551 /** Copy all the data(including non NDEF TLVs) from the card */ 552 uint8_t ReadBuf[PH_FRINFC_NDEFMAP_MFUL_64BYTES_BUF]; 553 /** index of the above buffer */ 554 uint16_t ReadBufIndex; 555 /** This variable stores the index of the "ReadBuf" from which actual 556 data has to be copied into the user buffer */ 557 uint16_t ByteNumber; 558 /** indicates that read/write has reached the end of the 559 card */ 560 uint8_t ReadWriteCompleteFlag; 561 /** Buffer to store 4 bytes of data which is written to a block */ 562 uint8_t Buffer[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 563 }phFriNfc_MifareULCont_t; 564 #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 565 566 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 567 /** 568 * \ingroup grp_fri_nfc_ndef_map 569 * \brief Mifare UL Basic structure which details the different vaiables 570 * used for Reading/writing. 571 * 572 */ 573 typedef struct phFriNfc_MockupCont 574 { 575 /** to store bytes that will be used in the 576 next write/read operation, if any */ 577 uint8_t *NdefData; 578 /** to Store the length of the internalBuf */ 579 uint32_t NdefActualSize; 580 /** to Store the length of the internalBuf */ 581 uint32_t NdefMaxSize; 582 /** to Store the length of the internalBuf */ 583 uint32_t CardSize; 584 /** holds the block number which is presently been used */ 585 uint32_t CurrentBlock; 586 } phFriNfc_MockupCont_t; 587 #endif /* PHFRINFC_OVRHAL_MOCKUP */ 588 589 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 590 591 /** 592 * \ingroup grp_fri_nfc_ndef_map 593 * \brief NDEF TLV structure which details the different vaiables 594 * used for TLV. 595 * 596 */ 597 typedef struct phFriNfc_NDEFTLVCont 598 { 599 /** Flag is to know that the TLV Type Found */ 600 uint8_t NdefTLVFoundFlag; 601 /** Sector number of the next/present available TLV */ 602 uint8_t NdefTLVSector; 603 /** Following two variables are used to store the 604 T byte and the Block number in which the T is 605 found in Tag */ 606 /** Byte number of the next/present available TLV */ 607 uint16_t NdefTLVByte; 608 /** Block number of the next/present available TLV */ 609 uint8_t NdefTLVBlock; 610 /** Authentication flag for NDEF TLV Block */ 611 uint8_t NdefTLVAuthFlag; 612 /** if the 16th byte of the last read is type (T) of TLV 613 and next read contains length (L) bytes of TLV. This flag 614 is set when the type (T) of TLV is found in the last read */ 615 uint8_t TcheckedinTLVFlag; 616 /** if the 16th byte of the last read is Length (L) of TLV 617 and next read contains length (L) bytes of TLV. This flag 618 is set when the Length (L) of TLV is found in the last read */ 619 uint8_t LcheckedinTLVFlag; 620 /** This flag is set, if Terminator TLV is already written 621 and next read contains value (V) bytes of TLV. This flag 622 is set when the value (V) of TLV is found in the last read */ 623 uint8_t SetTermTLVFlag; 624 /** To know the number of Length (L) field is present in the 625 next block */ 626 uint8_t NoLbytesinTLV; 627 /** The value of 3 bytes length(L) field in TLV. In 3 bytes 628 length field, 2 bytes are in one block and other 1 byte 629 is in the next block. To store the former block length 630 field value, this variable is used */ 631 uint16_t prevLenByteValue; 632 /** The value of length(L) field in TLV. */ 633 uint16_t BytesRemainLinTLV; 634 /** Actual size to read and write. This will be always equal to the 635 length (L) of TLV as there is only one NDEF TLV . */ 636 uint16_t ActualSize; 637 /** Flag is to write the length (L) field of the TLV */ 638 uint8_t WrLenFlag; 639 /** Flag is to write the length (L) field of the TLV */ 640 uint16_t NULLTLVCount; 641 /** Buffer to store 4 bytes of data which is written to a block */ 642 uint8_t NdefTLVBuffer[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 643 /** Buffer to store 4 bytes of data which is written to a next block */ 644 uint8_t NdefTLVBuffer1[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 645 }phFriNfc_NDEFTLVCont_t; 646 647 /** 648 * \ingroup grp_fri_nfc_ndef_map 649 * \brief Lock Control TLV structure which stores the Position, 650 * Size and PageCntrl details. 651 */ 652 653 typedef struct phFriNfc_LockCntrlTLVCont 654 { 655 /** Specifies the Byte Position of the lock cntrl tlv 656 in the card memory*/ 657 uint16_t ByteAddr; 658 659 /** Specifies the Size of the lock area in terms of 660 bits/bytes*/ 661 uint16_t Size; 662 663 /** Specifies the Bytes per Page*/ 664 uint8_t BytesPerPage; 665 666 /** Specifies the BytesLockedPerLockBit */ 667 uint8_t BytesLockedPerLockBit; 668 669 /** Specifies the index of Lock cntrl TLV*/ 670 uint8_t LockTlvBuffIdx; 671 672 /** Store the content of Lock cntrl TLV*/ 673 uint8_t LockTlvBuff[8]; 674 675 /** Specifies the Block number Lock cntrl TLV*/ 676 uint16_t BlkNum; 677 678 /** Specifies the Byte Number position of Lock cntrl TLV*/ 679 uint16_t ByteNum; 680 681 682 }phFriNfc_LockCntrlTLVCont_t; 683 684 685 /** 686 * \ingroup grp_fri_nfc_ndef_map 687 * \brief Memeory Control TLV structure which stores the Position, 688 * Size and PageCntrl details of the reserved byte area. 689 */ 690 691 typedef struct phFriNfc_ResMemCntrlTLVCont 692 { 693 /** Specifies the Byte Position of the lock cntrl tlv 694 in the card memory*/ 695 uint16_t ByteAddr; 696 697 /** Specifies the Size of the lock area in terms of 698 bits/bytes*/ 699 uint16_t Size; 700 701 /** Store the content of Memory cntrl TLV*/ 702 uint8_t MemCntrlTlvBuff[8]; 703 704 /** Specifies the Bytes per Page*/ 705 uint8_t BytesPerPage; 706 707 /** Specifies the index of Mem cntrl TLV*/ 708 uint8_t MemTlvBuffIdx; 709 710 /** Specifies the Block number Lock cntrl TLV*/ 711 uint16_t BlkNum; 712 713 /** Specifies the Byte Number position of Lock cntrl TLV*/ 714 uint16_t ByteNum; 715 716 717 718 }phFriNfc_ResMemCntrlTLVCont_t; 719 720 #if !(defined(PH_FRINFC_MAP_TOPAZ_DISABLED ) || defined (PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED )) 721 722 /** 723 * \ingroup grp_fri_nfc_ndef_map 724 * \brief Topaz container structure which details the different vaiables 725 * used for Topaz card mapping. 726 * 727 */ 728 typedef struct phFriNfc_TopazCont 729 { 730 /** This stores the free memory size left in the card. In case of topaz, 731 this is updated only during check ndef */ 732 uint16_t RemainingSize; 733 /** Stores the current block number */ 734 uint8_t CurrentBlock; 735 /** Stores the current block number */ 736 uint8_t ByteNumber; 737 /** To know the completion routine call */ 738 uint8_t CRIndex; 739 740 uint8_t ReadWriteCompleteFlag; 741 /** This state is used for write */ 742 uint8_t InternalState; 743 /** This state is used for write */ 744 uint8_t SkipLockBlkFlag; 745 /** To store the UID */ 746 uint8_t UID[PH_FRINFC_NDEFMAP_TOPAZ_UID_SIZE]; 747 /** To CC bytes length */ 748 uint8_t CCByteBuf[4]; 749 /** Store the Buffer Index */ 750 uint16_t Cur_RW_Index; 751 752 /* No of bytes read or write*/ 753 uint16_t ByteRWFrmCard; 754 755 /* Cuurent Segment */ 756 uint8_t CurrentSeg; 757 758 /** Store the read bytes */ 759 uint8_t ReadBuffer[PH_FRINFC_NDEFMAP_TOPAZ_MAX_SIZE]; 760 761 /** Size to know the exact data filled in the ReadBuffer. Useful, when the 762 offset = PH_FRINFC_NDEFMAP_SEEK_CUR */ 763 uint8_t ReadBufferSize; 764 765 /** NDEF TLV byte address, This stores the byte address of 766 TYPE field of the TLV */ 767 uint16_t NdefTLVByteAddress; 768 769 /** Expected sequence */ 770 uint8_t ExpectedSeq; 771 772 /** Write sequence */ 773 uint8_t WriteSeq; 774 775 /** Actual NDEF message size */ 776 uint16_t ActualNDEFMsgSize; 777 778 /** NDEF Read Write size in the card, this excludes lock and reserved bytes, 779 mentioned in the LOCK and MEMORY control TLVs */ 780 uint16_t NDEFRWSize; 781 782 /** Remaining read size in the card, after reading the card. 783 User has asked for the data less than " ActualNDEFMsgSize ", 784 then remaining read bytes are stored in this variable. 785 If the next read is with offset = PH_FRINFC_NDEFMAP_SEEK_CUR, 786 then this variable is used. 787 */ 788 uint16_t RemainingReadSize; 789 #ifdef FRINFC_READONLY_NDEF 790 uint8_t read_only_seq; 791 uint8_t lock_bytes_written; 792 #endif /* #ifdef FRINFC_READONLY_NDEF */ 793 794 }phFriNfc_TopazCont_t; 795 796 #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 797 /** 798 * \ingroup grp_fri_nfc_ndef_map 799 * \brief NFC NDEF Mapping Component Context Structure 800 * 801 * This structure is used to store the current context information of the instance. 802 * 803 */ 804 typedef struct phFriNfc_NdefMap 805 { 806 /**< \internal The state of the operation. */ 807 uint8_t State; 808 809 /**< \internal Completion Routine Context. */ 810 phFriNfc_CplRt_t CompletionRoutine[PH_FRINFC_NDEFMAP_CR]; 811 812 /**< \internal Pointer to the lower (HAL) instance. */ 813 void *LowerDevice; 814 815 /**<\internal Holds the device additional informations*/ 816 phHal_sDepAdditionalInfo_t psDepAdditionalInfo; 817 818 /**<\internal Holds the completion routine informations of the Map Layer*/ 819 phFriNfc_CplRt_t MapCompletionInfo; 820 821 /**< \internal Pointer to the Remote Device Information */ 822 phHal_sRemoteDevInformation_t *psRemoteDevInfo; 823 824 /**<\internal Holds the Command Type(read/write)*/ 825 phHal_uCmdList_t Cmd; 826 827 /**< \internal Pointer to a temporary buffer. Could be 828 used for read/write purposes */ 829 uint8_t *ApduBuffer; 830 831 /**< \internal Size allocated to the ApduBuffer. */ 832 uint32_t ApduBufferSize; 833 834 /**< \internal Index to the APDU Buffer. Used for internal calculations */ 835 uint16_t ApduBuffIndex; 836 837 /**< \internal Pointer to the user-provided Data Size to be written trough WrNdef function. */ 838 uint32_t *WrNdefPacketLength; 839 840 841 /**< \internal Holds the length of the received data. */ 842 uint16_t *SendRecvLength; 843 844 /**<\internal Holds the ack of some intial commands*/ 845 uint8_t *SendRecvBuf; 846 847 /**< \internal Holds the length of the data to be sent. */ 848 uint16_t SendLength; 849 850 /**< \internal Data Byte Count, which gives the offset to the integration.*/ 851 uint16_t *DataCount; 852 853 /**< \ internal Holds the previous operation on the card*/ 854 uint8_t PrevOperation; 855 856 /**< \ internal Holds the previous state on the card*/ 857 uint8_t PrevState; 858 859 /**< \internal Stores the type of the smart card. */ 860 uint8_t CardType; 861 862 /**< \internal Stores the card state. */ 863 uint8_t CardState; 864 865 /**< \internal Stores the memory size of the card */ 866 uint16_t CardMemSize; 867 868 /**<\internal to Store the page offset on the mifare ul card*/ 869 uint8_t Offset; 870 871 /** \internal specifies the desfire operation to be performed*/ 872 uint8_t DespOpFlag; 873 874 /** \internal Used to remeber how many bytes were written, to update 875 the dataCount and the BufferIndex */ 876 uint16_t NumOfBytesWritten; 877 878 /**\internal used to remember number of L byte Remaining to be written */ 879 uint16_t NumOfLReminWrite; 880 881 /** \internal Pointer Used to remeber and return how many bytes were read, 882 to update the PacketDataLength in case of Read operation */ 883 /* Fix for 0000238: [gk] MAP: Number of bytes actually read out is 884 not returned. */ 885 uint32_t *NumOfBytesRead; 886 887 /** \internal Flag used to tell the process function that WRITE has 888 requested for an internal READ.*/ 889 uint8_t ReadingForWriteOperation; 890 891 /** \internal Buffer of 5 bytes used for the write operation for the 892 Mifare UL card.*/ 893 uint8_t BufferForWriteOp[5]; 894 895 /** \internal Temporary Receive Length to update the Receive Length 896 when every time the Overlapped HAL is called. */ 897 uint16_t TempReceiveLength; 898 899 uint8_t NoOfDevices ; 900 901 /** \internal stores operating mode type of the felica smart tag */ 902 /* phHal_eOpModes_t OpModeType[2]; */ 903 904 /** \internal stores the type of the TLV found */ 905 uint8_t TLVFoundFlag; 906 907 /** \internal stores the TLV structure related informations */ 908 phFriNfc_NDEFTLVCont_t TLVStruct; 909 910 911 /** \internal stores the Lock Contrl Tlv related informations */ 912 phFriNfc_LockCntrlTLVCont_t LockTlv; 913 914 /** \internal stores the Mem Contrl Tlv related informations */ 915 phFriNfc_ResMemCntrlTLVCont_t MemTlv; 916 917 918 919 /** Capabilitity Containers: */ 920 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 921 /** \internal Desfire capability Container Structure. */ 922 #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 923 phFriNfc_DesfireCapCont_t DesfireCapContainer; 924 #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 925 926 #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 927 /** \internal Pointer to the Mifare Standard capability Container Structure. */ 928 phFriNfc_MifareStdCont_t StdMifareContainer; 929 #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 930 931 #ifndef PH_FRINFC_MAP_FELICA_DISABLED 932 /** \internal Following are the Felica Smart tag related strucutre & variables */ 933 phFriNfc_Felica_t Felica; 934 935 /** \internal Struture Stores the dev i/p , opmode informations of smart tag */ 936 phFriNfc_Felica_PollDetails_t FelicaPollDetails; 937 938 /** \internal Struture Stores the different attribute informations of smart tag */ 939 phFriNfc_Felica_AttrInfo_t FelicaAttrInfo; 940 941 /** \internal Struture Stores the PMm,IDm informations of smart tag */ 942 phFriNfc_Felica_ManufDetails_t FelicaManufDetails; 943 #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 944 #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 945 /** \internal Mifare UL capability container structure. */ 946 phFriNfc_MifareULCont_t MifareULContainer; 947 #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 948 #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 949 /** \internal Mifare UL capability container structure. */ 950 phFriNfc_TopazCont_t TopazContainer; 951 #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 952 953 #ifndef PH_FRINFC_MAP_ISO15693_DISABLED 954 phFriNfc_ISO15693Cont_t ISO15693Container; 955 #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 956 957 #ifdef PHFRINFC_OVRHAL_MOCKUP 958 phFriNfc_MockupCont_t MochupContainer; 959 #endif /* PHFRINFC_OVRHAL_MOCKUP */ 960 961 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 962 963 } phFriNfc_NdefMap_t; 964 965 966 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 967 968 /** 969 * \ingroup grp_fri_nfc_ndef_map 970 * 971 * \brief Ndef Mapping \b Reset function 972 * 973 * \copydoc page_reg Resets the component instance to the initial state and initialises the 974 * internal variables. 975 * 976 * \param[in] NdefMap is a Pointer to a valid and initialised or uninitialised instance 977 * of \ref phFriNfc_NdefMap_t . 978 * \param[in] LowerDevice Overlapped HAL reference, pointing at a valid instance of this 979 * underlying component. 980 * \param[in] psRemoteDevInfo Points to the Remote Device Information structure encapsulating 981 * the information about the device (Smart card, NFC device) to access. 982 * \param[in] psDevInputParam The Device input parameter, as used for the HAL POLL function. 983 * This parameter is needed by the component in special cases, when an internal call 984 * to POLL is required again, such as for FeliCa. The storage of the structure behind 985 * the pointer must be retained by the calling software. The component itself only 986 * keeps the reference. No change is applied to the structure's content. 987 * \param[in] TrxBuffer Pointer to an internally used buffer. The buffer has to be allocated by 988 * the integrating software (not done by the component). The purpose of 989 * this storage is to serve as an intermediate buffer for data frame 990 * composition and analysis. 991 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 992 * \param[in] TrxBufferSize The size of TrxBuffer: 993 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 994 * \param[in] ReceiveBuffer Pointer to a buffer that the component uses internally use to 995 * store the data received from the lower component. 996 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 997 * \param[in] ReceiveLength The size of ReceiveBuffer. This specifies the actual length 998 * of the data received from the lower component. 999 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 1000 * \param[in] DataCount Specifies the offset count during read/write operations. This can be 1001 * used by the integrating software to know about the total number of bytes read/written 1002 * from/to the card. The caller shall set the value behind the pointer to zero 1003 * before calling this function. 1004 * 1005 * \retval NFCSTATUS_SUCCESS Operation successful. 1006 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1007 * 1008 * \note The DataCount variable is internally updated by the module and must not be changed by the 1009 * embedding software. 1010 * \note This function has to be called at the beginning, after creating an instance of 1011 * \ref phFriNfc_NdefMap_t . Use this function to reset the instance and/or to switch 1012 * to a different underlying device (different NFC device or device mode). 1013 */ 1014 NFCSTATUS phFriNfc_NdefMap_Reset(phFriNfc_NdefMap_t *NdefMap, 1015 void *LowerDevice, 1016 phHal_sRemoteDevInformation_t *psRemoteDevInfo, 1017 phHal_sDevInputParam_t *psDevInputParam, 1018 uint8_t *TrxBuffer, 1019 uint16_t TrxBufferSize, 1020 uint8_t *ReceiveBuffer, 1021 uint16_t *ReceiveLength, 1022 uint16_t *DataCount); 1023 1024 1025 /** 1026 * \ingroup grp_fri_nfc_ndef_map 1027 * 1028 * \brief Ndef Mapping \b Set \b Completion \b Routine function 1029 * 1030 * \copydoc page_reg Setting of the Completion Routine. 1031 * 1032 * This function sets the Completion Routine for the specified function ID:\n 1033 * The completion routine is a function of an upper layer in the stack that needs to be notified 1034 * when the current instance has completed an I/O operation and data and/or an I/O status value 1035 * is available. The list of valid function IDs can be found under the section 1036 * "Completion Routine Indices", like e.g. \ref PH_FRINFC_NDEFMAP_CR_CHK_NDEF. 1037 * 1038 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure 1039 * serving as the component context. 1040 * \param[in] FunctionID ID of the component API function to set a with a completion routine for. 1041 * A valid routine has to be assigned for each function ID. 1042 * Use the "Completion Routine Indices", such as \ref PH_FRINFC_NDEFMAP_CR_CHK_NDEF . 1043 * \param[in] CompletionRoutine Pointer to a completion routine (part of a component of the upper layer) 1044 * to be called when the non-blocking opertaion has finished. 1045 * \param[in] CompletionRoutineContext Pointer to the context of the (upper) component where the 1046 * particular completion routine is located. 1047 * 1048 * \retval NFCSTATUS_SUCCESS Operation successful. 1049 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1050 * 1051 * \note This function has to be called after \ref phFriNfc_NdefMap_Reset . 1052 */ 1053 NFCSTATUS phFriNfc_NdefMap_SetCompletionRoutine(phFriNfc_NdefMap_t *NdefMap, 1054 uint8_t FunctionID, 1055 pphFriNfc_Cr_t CompletionRoutine, 1056 void *CompletionRoutineContext); 1057 1058 1059 /** 1060 * \ingroup grp_fri_nfc_ndef_map 1061 * 1062 * \brief Ndef Mapping \b Read \b Ndef function 1063 * 1064 * \copydoc page_ovr Initiates Reading of NDEF information from the Remote Device. 1065 * 1066 * The function initiates the reading of NDEF information from a Remote Device. 1067 * It performs a reset of the state and restarts the state machine. 1068 * 1069 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1070 * component context structure. 1071 * \param[in,out] PacketData Pointer to a location that shall receive the NDEF Packet. 1072 * \param[in,out] PacketDataLength Pointer to a variable that shall receive the length of the NDEF packet. 1073 * The caller has to provide the maximum length, the function fills 1074 * in the actual number of bytes received. 1075 * \param[in] Offset Indicates whether the read operation shall start from the begining of the 1076 * file/card storage \b or continue from the last offset. The last Offset set is stored 1077 * within a context (Data Count) variable (must not be modified by the integration). 1078 * If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall 1079 * start reading from the last offset set (continue where it has stopped before). 1080 * If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start reading 1081 * from the begining of the card (restarted) 1082 * 1083 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1084 * \retval NFCSTATUS_SUCCESS Operation Successful. 1085 * 1086 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1087 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1088 * \retval NFCSTATUS_EOF_CARD_REACHED No Space in the File to read. 1089 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1090 * meanwhile. 1091 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1092 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1093 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1094 * 1095 */ 1096 NFCSTATUS phFriNfc_NdefMap_RdNdef(phFriNfc_NdefMap_t *NdefMap, 1097 uint8_t *PacketData, 1098 uint32_t *PacketDataLength, 1099 uint8_t Offset); 1100 1101 1102 /** 1103 * \ingroup grp_fri_nfc_ndef_map 1104 * 1105 * \brief Ndef Mapping \b Check \b Ndef function 1106 * 1107 * \copydoc page_ovr Initiates Writing of NDEF information to the Remote Device. 1108 * 1109 * The function initiates the writing of NDEF information to a Remote Device. 1110 * It performs a reset of the state and starts the action (state machine). 1111 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action 1112 * has been triggered. 1113 * 1114 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1115 * component context structure. 1116 * \param[in] PacketData Pointer to a location that holds the prepared NDEF Packet. 1117 * \param[in,out] PacketDataLength Pointer to a variable that shall specify the length of the prepared NDEF packet. 1118 * The caller has to provide the length, the function fills 1119 * in the actual number of bytes received. 1120 * \param[in] Offset Indicates whether the write operation shall start from the begining of the 1121 * file/card storage \b or continue from the last offset. The last Offset set is stored 1122 * within a context (Data Count) variable (must not be modified by the integration). 1123 * If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall 1124 * start writing from the last offset set (continue where it has stopped before). 1125 * If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start writing 1126 * from the begining of the card (restarted) 1127 * 1128 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1129 * \retval NFCSTATUS_SUCCESS Operation Successful. 1130 * 1131 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1132 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1133 * \retval NFCSTATUS_EOF_CARD_REACHED No Space in the File to write. 1134 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1135 * meanwhile. 1136 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1137 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1138 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1139 * 1140 */ 1141 1142 extern NFCSTATUS phFriNfc_NdefMap_WrNdef(phFriNfc_NdefMap_t *NdefMap, 1143 uint8_t *PacketData, 1144 uint32_t *PacketDataLength, 1145 uint8_t Offset); 1146 1147 1148 /** 1149 * \ingroup grp_fri_nfc_ndef_map 1150 * 1151 * \brief Ndef Mapping \b Check \b NDEF function 1152 * 1153 * \copydoc page_ovr Check whether a particular Remote Device is NDEF compliant. 1154 * 1155 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1156 * component context structure. 1157 * 1158 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1159 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1160 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1161 * \retval NFCSTATUS_INVALID_PARAMETER Completion Routine is NULL. 1162 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE OpModes invalid. 1163 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1164 * meanwhile. 1165 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1166 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1167 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1168 * 1169 */ 1170 NFCSTATUS phFriNfc_NdefMap_ChkNdef(phFriNfc_NdefMap_t *NdefMap); 1171 1172 #ifdef FRINFC_READONLY_NDEF 1173 /*! 1174 * \ingroup grp_fri_smart_card_formatting 1175 * 1176 * \brief Initiates the conversion of the already NDEF formatted tag to READ ONLY. 1177 * 1178 * \copydoc page_ovr The function initiates the conversion of the already NDEF formatted 1179 * tag to READ ONLY.After this formation, remote card would be properly Ndef Compliant and READ ONLY. 1180 * Depending upon the different card type, this function handles formatting procedure. 1181 * This function supports only for the TOPAZ tags. 1182 * 1183 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing 1184 * the component context. 1185 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1186 * \retval Other values An error has occurred. 1187 * 1188 */ 1189 NFCSTATUS 1190 phFriNfc_NdefMap_ConvertToReadOnly ( 1191 phFriNfc_NdefMap_t *NdefMap); 1192 1193 #endif /* #ifdef FRINFC_READONLY_NDEF */ 1194 1195 /** 1196 * \ingroup grp_fri_nfc_ndef_map 1197 * 1198 * \brief Ndef Mapping \b Erase \b NDEF function 1199 * 1200 * \copydoc page_ovr find the position of the existing NDEF TLV and overwrite with \b empty NDEF 1201 * message \b at that position. 1202 * 1203 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1204 * component context structure. 1205 * 1206 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1207 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1208 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1209 * \retval NFCSTATUS_INVALID_PARAMETER Completion Routine is NULL. 1210 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE OpModes invalid. 1211 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1212 * meanwhile. 1213 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1214 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1215 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1216 * 1217 */ 1218 NFCSTATUS phFriNfc_NdefMap_EraseNdef(phFriNfc_NdefMap_t *NdefMap); 1219 1220 /** 1221 * \ingroup grp_fri_nfc_ndef_map 1222 * 1223 * \brief Ndef Mapping \b Get Container size function 1224 * 1225 * \copydoc page_ovr Returns the size of the NDEF data that the card can hold to the caller. 1226 * 1227 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1228 * component context structure. 1229 * 1230 * \param[out] size Pointer to a uint32_t variable, which receives the size of the NDEF data 1231 * 1232 * \retval NFCSTATUS_SUCCESS The size has been successfully calculated. 1233 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1234 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1235 * 1236 */ 1237 1238 NFCSTATUS phFriNfc_NdefMap_GetContainerSize(const phFriNfc_NdefMap_t *NdefMap,uint32_t *maxSize, uint32_t *actualSize); 1239 1240 /** 1241 * \ingroup grp_fri_nfc_ndef_map 1242 * 1243 * \brief Ndef Mapping \b Completion \b Routine or \b Process function 1244 * 1245 * \copydoc page_cb Completion Routine: This function is called by the lower layer (OVR HAL) 1246 * when an I/O operation has finished. The internal state machine decides 1247 * whether to call into the lower device again or to complete the process 1248 * by calling into the upper layer's completion routine, stored within this 1249 * component's context (\ref phFriNfc_NdefMap_t). 1250 * 1251 * The function call scheme is according to \ref grp_interact. No State reset is performed during 1252 * operation. 1253 * 1254 * \param[in] Context The context of the current (not the lower/upper) instance, as set by the lower, 1255 * calling layer, upon its completion. 1256 * \param[in] Status The completion status of the lower layer (to be handled by the implementation of 1257 * the state machine of this function like a regular return value of an internally 1258 * called function). 1259 * 1260 * \note For general information about the completion routine interface please see \ref pphFriNfc_Cr_t . * The Different Status Values are as follows 1261 * 1262 */ 1263 void phFriNfc_NdefMap_Process(void *Context, 1264 NFCSTATUS Status); 1265 1266 1267 1268 /** 1269 * \ingroup grp_fri_nfc_ndef_map 1270 * 1271 * \brief Ndef Mapping \b Check And Parse TLV Structure \b NDEF function 1272 * 1273 * \copydoc page_ovr Checks the presence of a valid TLV's(NDEF/Propritery). 1274 * 1275 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1276 * component context structure. 1277 * 1278 * \retval NFCSTATUS_INVALID_FORMAT No valid TLV Found. 1279 * \retval NFCSTATUS_SUCCESS Operation Successful. 1280 * 1281 */ 1282 NFCSTATUS phFriNfc_ChkAndParseTLV(phFriNfc_NdefMap_t *NdefMap); 1283 1284 1285 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 1286 1287 /** 1288 * \ingroup grp_fri_nfc_ndef_map 1289 * 1290 * \brief Set data NDEF in mockup mode 1291 * 1292 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t component context structure. 1293 * \param[in] NdefData Pointer to card mockup data 1294 * \param[in] NdefActualSize The actual data length 1295 * \param[in] NdefMaxSize The max data length 1296 * \param[in] NdefCardSize The total card size 1297 * 1298 * \retval NFCSTATUS_SUCCESS The operation is ok. 1299 * 1300 */ 1301 NFCSTATUS phFriNfc_NdefMap_MockupCardSetter(phFriNfc_NdefMap_t *NdefMap, uint8_t *NdefData, uint32_t NdefActualSize, uint32_t NdefMaxSize, uint32_t CardSize); 1302 NFCSTATUS phFriNfc_NdefMap_MockupNDefModeEn(uint8_t *pNdefCompliancy, uint8_t *pCardType, uint8_t Enable); 1303 #endif /*#ifndef PH_FRINFC_MAP_MOCKUP_DISABLED*/ 1304 1305 1306 /** 1307 * \internal 1308 * \name States of the FSM. 1309 * 1310 */ 1311 /*@{*/ 1312 #define PH_FRINFC_NDEFMAP_STATE_RESET_INIT 0 /**< \internal Initial state */ 1313 #define PH_FRINFC_NDEFMAP_STATE_CR_REGISTERED 1 /**< \internal CR has been registered */ 1314 #define PH_FRINFC_NDEFMAP_STATE_EOF_CARD 2 /**< \internal EOF card reached */ 1315 /*@}*/ 1316 1317 /* Following values specify the previous operation on the card. This value is assigned to 1318 the context structure variable: PrevOperation. */ 1319 1320 /**< Previous operation is check*/ 1321 #define PH_FRINFC_NDEFMAP_CHECK_OPE 1 1322 /**< Previous operation is read*/ 1323 #define PH_FRINFC_NDEFMAP_READ_OPE 2 1324 /**< Previous operation is write */ 1325 #define PH_FRINFC_NDEFMAP_WRITE_OPE 3 1326 /**< Previous operation is Actual size */ 1327 #define PH_FRINFC_NDEFMAP_GET_ACTSIZE_OPE 4 1328 1329 /* This flag is set when there is a need of write operation on the odd positions 1330 ex: 35,5 etc. This is used with MfUlOp Flag */ 1331 #define PH_FRINFC_MFUL_INTERNAL_READ 3 /**< \internal Read/Write control*/ 1332 1333 1334 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 1335 1336 #endif /* PHFRINFC_NDEFMAP_H */ 1337
