Lines Matching refs:network
19 # file whenever configuration is changed (e.g., new network block is added with
26 # global configuration (shared by all network blocks)
46 # possible to run wpa_supplicant as root (since it needs to change network
49 # change the network configuration, this access needs to be protected in many
95 # the currently enabled networks are found, a new network (IBSS or AP mode
107 # the network blocks in the configuration file are tried one by one until
108 # the driver reports successful association; each network block should have
111 # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
114 # networks are found, a new IBSS or AP mode network is created.
137 # loaded here before being used in the network blocks. By default, EAP methods
196 # 6-0050F204-1 (Network Infrastructure / AP)
288 # with the global okc=1 parameter or with the per-network
290 # can be disabled with per-network proactive_key_caching=0 parameter.
296 # parameter or with the per-network ieee80211w=1/2 parameter. With pmf=1/2, PMF
297 # is enabled/required by default, but can be disabled with the per-network
309 # Default value for DTIM period (if not overridden in network block)
312 # Default value for Beacon interval (if not overridden in network block)
341 # the per-network mac_addr parameter. Global mac_addr=1 can be used to
365 # Automatic network selection behavior
366 # 0 = do not automatically go through Interworking network selection
368 # 1 = perform Interworking network
370 # matching network block
375 # Each credential used for automatic network selection is configured as a set
386 # (and similarly in struct wpa_ssid for network blocks) to change the
388 # network (based on either an enabled network block or a credential)
395 # username: Username for Interworking network selection
397 # password: Password for Interworking network selection
399 # ca_cert: CA certificate for Interworking network selection
451 # Consortium to match the network, the EAP parameters need to be
468 # matching with the network. Multiple entries can be used to specify more
497 # This value is used as the maximum channel utilization for network
505 # a roaming network shall support (include explicitly in Connection
508 # network connection. This policy is not used in home networks.
553 # network block
555 # Each network (usually AP's sharing the same SSID) is configured as a separate
556 # block in this configuration file. The network blocks are in preference order
559 # network block fields:
562 # 0 = this network can be used (default)
563 # 1 = this network block is disabled (can be enabled through ctrl_iface,
566 # id_str: Network identifier string for external scripts. This value is passed
568 # variable to make it easier to do network specific configuration.
570 # ssid: SSID (mandatory); network name in one of the optional formats:
581 # bssid: BSSID (optional); if set, this network block is used only when
589 # priority value, the sooner the network is matched against the scan results).
603 # deprecated. WPA-None requires following network block options:
611 # an IBSS network with the configured SSID is already present, the frequency of
612 # the network will be used instead of this configured value.
616 # BSS. If the subset of channels used by the network is known, this option can
617 # be used to optimize scanning to not occur on channels that the network does
625 # This can also be set on the outside of the network block. In this case,
632 # single network block with all the APs using the same SSID). The bgscan
639 # learn - Learn channels used by the network and try to avoid bgscans on other
647 # This option can also be set outside of all network blocks for the bgscan
679 # LEAP = LEAP/Network EAP (only used with LEAP)
926 # small enough to make the EAP messages fit in MTU of the network
1046 network={
1054 network={
1062 network={
1073 network={
1085 network={
1102 network={
1116 network={
1129 network={
1142 network={
1160 network={
1172 network={
1179 network={
1189 network={
1202 network={
1216 network={
1225 network={
1234 network={
1245 network={
1257 network={
1264 network={
1277 network={
1289 # IBSS/ad-hoc network with RSN
1290 network={
1301 # IBSS/ad-hoc network with WPA-None/TKIP (deprecated)
1302 network={
1315 network={
1333 network={
1366 network={
1384 network={
1391 network={
1397 #network={
