1 /* 2 * Copyright (C) 2011 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 18 #ifndef ANDROID_AUDIO_EFFECT_H 19 #define ANDROID_AUDIO_EFFECT_H 20 21 #include <errno.h> 22 #include <stdint.h> 23 #include <strings.h> 24 #include <sys/cdefs.h> 25 #include <sys/types.h> 26 27 #include <cutils/bitops.h> 28 29 #include <system/audio.h> 30 31 32 __BEGIN_DECLS 33 34 35 ///////////////////////////////////////////////// 36 // Common Definitions 37 ///////////////////////////////////////////////// 38 39 // 40 //--- Effect descriptor structure effect_descriptor_t 41 // 42 43 // Unique effect ID (can be generated from the following site: 44 // http://www.itu.int/ITU-T/asn1/uuid.html) 45 // This format is used for both "type" and "uuid" fields of the effect descriptor structure. 46 // - When used for effect type and the engine is implementing and effect corresponding to a standard 47 // OpenSL ES interface, this ID must be the one defined in OpenSLES_IID.h for that interface. 48 // - When used as uuid, it should be a unique UUID for this particular implementation. 49 typedef struct effect_uuid_s { 50 uint32_t timeLow; 51 uint16_t timeMid; 52 uint16_t timeHiAndVersion; 53 uint16_t clockSeq; 54 uint8_t node[6]; 55 } effect_uuid_t; 56 57 // Maximum length of character strings in structures defines by this API. 58 #define EFFECT_STRING_LEN_MAX 64 59 60 // NULL UUID definition (matches SL_IID_NULL_) 61 #define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, \ 62 { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } } 63 static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER; 64 static const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_; 65 static const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210"; 66 67 68 // The effect descriptor contains necessary information to facilitate the enumeration of the effect 69 // engines present in a library. 70 typedef struct effect_descriptor_s { 71 effect_uuid_t type; // UUID of to the OpenSL ES interface implemented by this effect 72 effect_uuid_t uuid; // UUID for this particular implementation 73 uint32_t apiVersion; // Version of the effect control API implemented 74 uint32_t flags; // effect engine capabilities/requirements flags (see below) 75 uint16_t cpuLoad; // CPU load indication (see below) 76 uint16_t memoryUsage; // Data Memory usage (see below) 77 char name[EFFECT_STRING_LEN_MAX]; // human readable effect name 78 char implementor[EFFECT_STRING_LEN_MAX]; // human readable effect implementor name 79 } effect_descriptor_t; 80 81 // CPU load and memory usage indication: each effect implementation must provide an indication of 82 // its CPU and memory usage for the audio effect framework to limit the number of effects 83 // instantiated at a given time on a given platform. 84 // The CPU load is expressed in 0.1 MIPS units as estimated on an ARM9E core (ARMv5TE) with 0 WS. 85 // The memory usage is expressed in KB and includes only dynamically allocated memory 86 87 // Definitions for flags field of effect descriptor. 88 // +---------------------------+-----------+----------------------------------- 89 // | description | bits | values 90 // +---------------------------+-----------+----------------------------------- 91 // | connection mode | 0..2 | 0 insert: after track process 92 // | | | 1 auxiliary: connect to track auxiliary 93 // | | | output and use send level 94 // | | | 2 replace: replaces track process function; 95 // | | | must implement SRC, volume and mono to stereo. 96 // | | | 3 pre processing: applied below audio HAL on input 97 // | | | 4 post processing: applied below audio HAL on output 98 // | | | 5 - 7 reserved 99 // +---------------------------+-----------+----------------------------------- 100 // | insertion preference | 3..5 | 0 none 101 // | | | 1 first of the chain 102 // | | | 2 last of the chain 103 // | | | 3 exclusive (only effect in the insert chain) 104 // | | | 4..7 reserved 105 // +---------------------------+-----------+----------------------------------- 106 // | Volume management | 6..8 | 0 none 107 // | | | 1 implements volume control 108 // | | | 2 requires volume indication 109 // | | | 4 reserved 110 // +---------------------------+-----------+----------------------------------- 111 // | Device indication | 9..11 | 0 none 112 // | | | 1 requires device updates 113 // | | | 2, 4 reserved 114 // +---------------------------+-----------+----------------------------------- 115 // | Sample input mode | 12..13 | 1 direct: process() function or EFFECT_CMD_SET_CONFIG 116 // | | | command must specify a buffer descriptor 117 // | | | 2 provider: process() function uses the 118 // | | | bufferProvider indicated by the 119 // | | | EFFECT_CMD_SET_CONFIG command to request input. 120 // | | | buffers. 121 // | | | 3 both: both input modes are supported 122 // +---------------------------+-----------+----------------------------------- 123 // | Sample output mode | 14..15 | 1 direct: process() function or EFFECT_CMD_SET_CONFIG 124 // | | | command must specify a buffer descriptor 125 // | | | 2 provider: process() function uses the 126 // | | | bufferProvider indicated by the 127 // | | | EFFECT_CMD_SET_CONFIG command to request output 128 // | | | buffers. 129 // | | | 3 both: both output modes are supported 130 // +---------------------------+-----------+----------------------------------- 131 // | Hardware acceleration | 16..17 | 0 No hardware acceleration 132 // | | | 1 non tunneled hw acceleration: the process() function 133 // | | | reads the samples, send them to HW accelerated 134 // | | | effect processor, reads back the processed samples 135 // | | | and returns them to the output buffer. 136 // | | | 2 tunneled hw acceleration: the process() function is 137 // | | | transparent. The effect interface is only used to 138 // | | | control the effect engine. This mode is relevant for 139 // | | | global effects actually applied by the audio 140 // | | | hardware on the output stream. 141 // +---------------------------+-----------+----------------------------------- 142 // | Audio Mode indication | 18..19 | 0 none 143 // | | | 1 requires audio mode updates 144 // | | | 2..3 reserved 145 // +---------------------------+-----------+----------------------------------- 146 // | Audio source indication | 20..21 | 0 none 147 // | | | 1 requires audio source updates 148 // | | | 2..3 reserved 149 // +---------------------------+-----------+----------------------------------- 150 // | Effect offload supported | 22 | 0 The effect cannot be offloaded to an audio DSP 151 // | | | 1 The effect can be offloaded to an audio DSP 152 // +---------------------------+-----------+----------------------------------- 153 154 // Insert mode 155 #define EFFECT_FLAG_TYPE_SHIFT 0 156 #define EFFECT_FLAG_TYPE_SIZE 3 157 #define EFFECT_FLAG_TYPE_MASK (((1 << EFFECT_FLAG_TYPE_SIZE) -1) \ 158 << EFFECT_FLAG_TYPE_SHIFT) 159 #define EFFECT_FLAG_TYPE_INSERT (0 << EFFECT_FLAG_TYPE_SHIFT) 160 #define EFFECT_FLAG_TYPE_AUXILIARY (1 << EFFECT_FLAG_TYPE_SHIFT) 161 #define EFFECT_FLAG_TYPE_REPLACE (2 << EFFECT_FLAG_TYPE_SHIFT) 162 #define EFFECT_FLAG_TYPE_PRE_PROC (3 << EFFECT_FLAG_TYPE_SHIFT) 163 #define EFFECT_FLAG_TYPE_POST_PROC (4 << EFFECT_FLAG_TYPE_SHIFT) 164 165 // Insert preference 166 #define EFFECT_FLAG_INSERT_SHIFT (EFFECT_FLAG_TYPE_SHIFT + EFFECT_FLAG_TYPE_SIZE) 167 #define EFFECT_FLAG_INSERT_SIZE 3 168 #define EFFECT_FLAG_INSERT_MASK (((1 << EFFECT_FLAG_INSERT_SIZE) -1) \ 169 << EFFECT_FLAG_INSERT_SHIFT) 170 #define EFFECT_FLAG_INSERT_ANY (0 << EFFECT_FLAG_INSERT_SHIFT) 171 #define EFFECT_FLAG_INSERT_FIRST (1 << EFFECT_FLAG_INSERT_SHIFT) 172 #define EFFECT_FLAG_INSERT_LAST (2 << EFFECT_FLAG_INSERT_SHIFT) 173 #define EFFECT_FLAG_INSERT_EXCLUSIVE (3 << EFFECT_FLAG_INSERT_SHIFT) 174 175 176 // Volume control 177 #define EFFECT_FLAG_VOLUME_SHIFT (EFFECT_FLAG_INSERT_SHIFT + EFFECT_FLAG_INSERT_SIZE) 178 #define EFFECT_FLAG_VOLUME_SIZE 3 179 #define EFFECT_FLAG_VOLUME_MASK (((1 << EFFECT_FLAG_VOLUME_SIZE) -1) \ 180 << EFFECT_FLAG_VOLUME_SHIFT) 181 #define EFFECT_FLAG_VOLUME_CTRL (1 << EFFECT_FLAG_VOLUME_SHIFT) 182 #define EFFECT_FLAG_VOLUME_IND (2 << EFFECT_FLAG_VOLUME_SHIFT) 183 #define EFFECT_FLAG_VOLUME_NONE (0 << EFFECT_FLAG_VOLUME_SHIFT) 184 185 // Device indication 186 #define EFFECT_FLAG_DEVICE_SHIFT (EFFECT_FLAG_VOLUME_SHIFT + EFFECT_FLAG_VOLUME_SIZE) 187 #define EFFECT_FLAG_DEVICE_SIZE 3 188 #define EFFECT_FLAG_DEVICE_MASK (((1 << EFFECT_FLAG_DEVICE_SIZE) -1) \ 189 << EFFECT_FLAG_DEVICE_SHIFT) 190 #define EFFECT_FLAG_DEVICE_IND (1 << EFFECT_FLAG_DEVICE_SHIFT) 191 #define EFFECT_FLAG_DEVICE_NONE (0 << EFFECT_FLAG_DEVICE_SHIFT) 192 193 // Sample input modes 194 #define EFFECT_FLAG_INPUT_SHIFT (EFFECT_FLAG_DEVICE_SHIFT + EFFECT_FLAG_DEVICE_SIZE) 195 #define EFFECT_FLAG_INPUT_SIZE 2 196 #define EFFECT_FLAG_INPUT_MASK (((1 << EFFECT_FLAG_INPUT_SIZE) -1) \ 197 << EFFECT_FLAG_INPUT_SHIFT) 198 #define EFFECT_FLAG_INPUT_DIRECT (1 << EFFECT_FLAG_INPUT_SHIFT) 199 #define EFFECT_FLAG_INPUT_PROVIDER (2 << EFFECT_FLAG_INPUT_SHIFT) 200 #define EFFECT_FLAG_INPUT_BOTH (3 << EFFECT_FLAG_INPUT_SHIFT) 201 202 // Sample output modes 203 #define EFFECT_FLAG_OUTPUT_SHIFT (EFFECT_FLAG_INPUT_SHIFT + EFFECT_FLAG_INPUT_SIZE) 204 #define EFFECT_FLAG_OUTPUT_SIZE 2 205 #define EFFECT_FLAG_OUTPUT_MASK (((1 << EFFECT_FLAG_OUTPUT_SIZE) -1) \ 206 << EFFECT_FLAG_OUTPUT_SHIFT) 207 #define EFFECT_FLAG_OUTPUT_DIRECT (1 << EFFECT_FLAG_OUTPUT_SHIFT) 208 #define EFFECT_FLAG_OUTPUT_PROVIDER (2 << EFFECT_FLAG_OUTPUT_SHIFT) 209 #define EFFECT_FLAG_OUTPUT_BOTH (3 << EFFECT_FLAG_OUTPUT_SHIFT) 210 211 // Hardware acceleration mode 212 #define EFFECT_FLAG_HW_ACC_SHIFT (EFFECT_FLAG_OUTPUT_SHIFT + EFFECT_FLAG_OUTPUT_SIZE) 213 #define EFFECT_FLAG_HW_ACC_SIZE 2 214 #define EFFECT_FLAG_HW_ACC_MASK (((1 << EFFECT_FLAG_HW_ACC_SIZE) -1) \ 215 << EFFECT_FLAG_HW_ACC_SHIFT) 216 #define EFFECT_FLAG_HW_ACC_SIMPLE (1 << EFFECT_FLAG_HW_ACC_SHIFT) 217 #define EFFECT_FLAG_HW_ACC_TUNNEL (2 << EFFECT_FLAG_HW_ACC_SHIFT) 218 219 // Audio mode indication 220 #define EFFECT_FLAG_AUDIO_MODE_SHIFT (EFFECT_FLAG_HW_ACC_SHIFT + EFFECT_FLAG_HW_ACC_SIZE) 221 #define EFFECT_FLAG_AUDIO_MODE_SIZE 2 222 #define EFFECT_FLAG_AUDIO_MODE_MASK (((1 << EFFECT_FLAG_AUDIO_MODE_SIZE) -1) \ 223 << EFFECT_FLAG_AUDIO_MODE_SHIFT) 224 #define EFFECT_FLAG_AUDIO_MODE_IND (1 << EFFECT_FLAG_AUDIO_MODE_SHIFT) 225 #define EFFECT_FLAG_AUDIO_MODE_NONE (0 << EFFECT_FLAG_AUDIO_MODE_SHIFT) 226 227 // Audio source indication 228 #define EFFECT_FLAG_AUDIO_SOURCE_SHIFT (EFFECT_FLAG_AUDIO_MODE_SHIFT + EFFECT_FLAG_AUDIO_MODE_SIZE) 229 #define EFFECT_FLAG_AUDIO_SOURCE_SIZE 2 230 #define EFFECT_FLAG_AUDIO_SOURCE_MASK (((1 << EFFECT_FLAG_AUDIO_SOURCE_SIZE) -1) \ 231 << EFFECT_FLAG_AUDIO_SOURCE_SHIFT) 232 #define EFFECT_FLAG_AUDIO_SOURCE_IND (1 << EFFECT_FLAG_AUDIO_SOURCE_SHIFT) 233 #define EFFECT_FLAG_AUDIO_SOURCE_NONE (0 << EFFECT_FLAG_AUDIO_SOURCE_SHIFT) 234 235 // Effect offload indication 236 #define EFFECT_FLAG_OFFLOAD_SHIFT (EFFECT_FLAG_AUDIO_SOURCE_SHIFT + \ 237 EFFECT_FLAG_AUDIO_SOURCE_SIZE) 238 #define EFFECT_FLAG_OFFLOAD_SIZE 1 239 #define EFFECT_FLAG_OFFLOAD_MASK (((1 << EFFECT_FLAG_OFFLOAD_SIZE) -1) \ 240 << EFFECT_FLAG_OFFLOAD_SHIFT) 241 #define EFFECT_FLAG_OFFLOAD_SUPPORTED (1 << EFFECT_FLAG_OFFLOAD_SHIFT) 242 243 #define EFFECT_MAKE_API_VERSION(M, m) (((M)<<16) | ((m) & 0xFFFF)) 244 #define EFFECT_API_VERSION_MAJOR(v) ((v)>>16) 245 #define EFFECT_API_VERSION_MINOR(v) ((m) & 0xFFFF) 246 247 248 249 ///////////////////////////////////////////////// 250 // Effect control interface 251 ///////////////////////////////////////////////// 252 253 // Effect control interface version 2.0 254 #define EFFECT_CONTROL_API_VERSION EFFECT_MAKE_API_VERSION(2,0) 255 256 // Effect control interface structure: effect_interface_s 257 // The effect control interface is exposed by each effect engine implementation. It consists of 258 // a set of functions controlling the configuration, activation and process of the engine. 259 // The functions are grouped in a structure of type effect_interface_s. 260 // 261 // Effect control interface handle: effect_handle_t 262 // The effect_handle_t serves two purposes regarding the implementation of the effect engine: 263 // - 1 it is the address of a pointer to an effect_interface_s structure where the functions 264 // of the effect control API for a particular effect are located. 265 // - 2 it is the address of the context of a particular effect instance. 266 // A typical implementation in the effect library would define a structure as follows: 267 // struct effect_module_s { 268 // const struct effect_interface_s *itfe; 269 // effect_config_t config; 270 // effect_context_t context; 271 // } 272 // The implementation of EffectCreate() function would then allocate a structure of this 273 // type and return its address as effect_handle_t 274 typedef struct effect_interface_s **effect_handle_t; 275 276 277 // Forward definition of type audio_buffer_t 278 typedef struct audio_buffer_s audio_buffer_t; 279 280 281 282 283 284 285 // Effect control interface definition 286 struct effect_interface_s { 287 //////////////////////////////////////////////////////////////////////////////// 288 // 289 // Function: process 290 // 291 // Description: Effect process function. Takes input samples as specified 292 // (count and location) in input buffer descriptor and output processed 293 // samples as specified in output buffer descriptor. If the buffer descriptor 294 // is not specified the function must use either the buffer or the 295 // buffer provider function installed by the EFFECT_CMD_SET_CONFIG command. 296 // The effect framework will call the process() function after the EFFECT_CMD_ENABLE 297 // command is received and until the EFFECT_CMD_DISABLE is received. When the engine 298 // receives the EFFECT_CMD_DISABLE command it should turn off the effect gracefully 299 // and when done indicate that it is OK to stop calling the process() function by 300 // returning the -ENODATA status. 301 // 302 // NOTE: the process() function implementation should be "real-time safe" that is 303 // it should not perform blocking calls: malloc/free, sleep, read/write/open/close, 304 // pthread_cond_wait/pthread_mutex_lock... 305 // 306 // Input: 307 // self: handle to the effect interface this function 308 // is called on. 309 // inBuffer: buffer descriptor indicating where to read samples to process. 310 // If NULL, use the configuration passed by EFFECT_CMD_SET_CONFIG command. 311 // 312 // outBuffer: buffer descriptor indicating where to write processed samples. 313 // If NULL, use the configuration passed by EFFECT_CMD_SET_CONFIG command. 314 // 315 // Output: 316 // returned value: 0 successful operation 317 // -ENODATA the engine has finished the disable phase and the framework 318 // can stop calling process() 319 // -EINVAL invalid interface handle or 320 // invalid input/output buffer description 321 //////////////////////////////////////////////////////////////////////////////// 322 int32_t (*process)(effect_handle_t self, 323 audio_buffer_t *inBuffer, 324 audio_buffer_t *outBuffer); 325 //////////////////////////////////////////////////////////////////////////////// 326 // 327 // Function: command 328 // 329 // Description: Send a command and receive a response to/from effect engine. 330 // 331 // Input: 332 // self: handle to the effect interface this function 333 // is called on. 334 // cmdCode: command code: the command can be a standardized command defined in 335 // effect_command_e (see below) or a proprietary command. 336 // cmdSize: size of command in bytes 337 // pCmdData: pointer to command data 338 // pReplyData: pointer to reply data 339 // 340 // Input/Output: 341 // replySize: maximum size of reply data as input 342 // actual size of reply data as output 343 // 344 // Output: 345 // returned value: 0 successful operation 346 // -EINVAL invalid interface handle or 347 // invalid command/reply size or format according to command code 348 // The return code should be restricted to indicate problems related to the this 349 // API specification. Status related to the execution of a particular command should be 350 // indicated as part of the reply field. 351 // 352 // *pReplyData updated with command response 353 // 354 //////////////////////////////////////////////////////////////////////////////// 355 int32_t (*command)(effect_handle_t self, 356 uint32_t cmdCode, 357 uint32_t cmdSize, 358 void *pCmdData, 359 uint32_t *replySize, 360 void *pReplyData); 361 //////////////////////////////////////////////////////////////////////////////// 362 // 363 // Function: get_descriptor 364 // 365 // Description: Returns the effect descriptor 366 // 367 // Input: 368 // self: handle to the effect interface this function 369 // is called on. 370 // 371 // Input/Output: 372 // pDescriptor: address where to return the effect descriptor. 373 // 374 // Output: 375 // returned value: 0 successful operation. 376 // -EINVAL invalid interface handle or invalid pDescriptor 377 // *pDescriptor: updated with the effect descriptor. 378 // 379 //////////////////////////////////////////////////////////////////////////////// 380 int32_t (*get_descriptor)(effect_handle_t self, 381 effect_descriptor_t *pDescriptor); 382 //////////////////////////////////////////////////////////////////////////////// 383 // 384 // Function: process_reverse 385 // 386 // Description: Process reverse stream function. This function is used to pass 387 // a reference stream to the effect engine. If the engine does not need a reference 388 // stream, this function pointer can be set to NULL. 389 // This function would typically implemented by an Echo Canceler. 390 // 391 // Input: 392 // self: handle to the effect interface this function 393 // is called on. 394 // inBuffer: buffer descriptor indicating where to read samples to process. 395 // If NULL, use the configuration passed by EFFECT_CMD_SET_CONFIG_REVERSE command. 396 // 397 // outBuffer: buffer descriptor indicating where to write processed samples. 398 // If NULL, use the configuration passed by EFFECT_CMD_SET_CONFIG_REVERSE command. 399 // If the buffer and buffer provider in the configuration received by 400 // EFFECT_CMD_SET_CONFIG_REVERSE are also NULL, do not return modified reverse 401 // stream data 402 // 403 // Output: 404 // returned value: 0 successful operation 405 // -ENODATA the engine has finished the disable phase and the framework 406 // can stop calling process_reverse() 407 // -EINVAL invalid interface handle or 408 // invalid input/output buffer description 409 //////////////////////////////////////////////////////////////////////////////// 410 int32_t (*process_reverse)(effect_handle_t self, 411 audio_buffer_t *inBuffer, 412 audio_buffer_t *outBuffer); 413 }; 414 415 416 // 417 //--- Standardized command codes for command() function 418 // 419 enum effect_command_e { 420 EFFECT_CMD_INIT, // initialize effect engine 421 EFFECT_CMD_SET_CONFIG, // configure effect engine (see effect_config_t) 422 EFFECT_CMD_RESET, // reset effect engine 423 EFFECT_CMD_ENABLE, // enable effect process 424 EFFECT_CMD_DISABLE, // disable effect process 425 EFFECT_CMD_SET_PARAM, // set parameter immediately (see effect_param_t) 426 EFFECT_CMD_SET_PARAM_DEFERRED, // set parameter deferred 427 EFFECT_CMD_SET_PARAM_COMMIT, // commit previous set parameter deferred 428 EFFECT_CMD_GET_PARAM, // get parameter 429 EFFECT_CMD_SET_DEVICE, // set audio device (see audio.h, audio_devices_t) 430 EFFECT_CMD_SET_VOLUME, // set volume 431 EFFECT_CMD_SET_AUDIO_MODE, // set the audio mode (normal, ring, ...) 432 EFFECT_CMD_SET_CONFIG_REVERSE, // configure effect engine reverse stream(see effect_config_t) 433 EFFECT_CMD_SET_INPUT_DEVICE, // set capture device (see audio.h, audio_devices_t) 434 EFFECT_CMD_GET_CONFIG, // read effect engine configuration 435 EFFECT_CMD_GET_CONFIG_REVERSE, // read configure effect engine reverse stream configuration 436 EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS,// get all supported configurations for a feature. 437 EFFECT_CMD_GET_FEATURE_CONFIG, // get current feature configuration 438 EFFECT_CMD_SET_FEATURE_CONFIG, // set current feature configuration 439 EFFECT_CMD_SET_AUDIO_SOURCE, // set the audio source (see audio.h, audio_source_t) 440 EFFECT_CMD_OFFLOAD, // set if effect thread is an offload one, 441 // send the ioHandle of the effect thread 442 EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code 443 }; 444 445 //================================================================================================== 446 // command: EFFECT_CMD_INIT 447 //-------------------------------------------------------------------------------------------------- 448 // description: 449 // Initialize effect engine: All configurations return to default 450 //-------------------------------------------------------------------------------------------------- 451 // command format: 452 // size: 0 453 // data: N/A 454 //-------------------------------------------------------------------------------------------------- 455 // reply format: 456 // size: sizeof(int) 457 // data: status 458 //================================================================================================== 459 // command: EFFECT_CMD_SET_CONFIG 460 //-------------------------------------------------------------------------------------------------- 461 // description: 462 // Apply new audio parameters configurations for input and output buffers 463 //-------------------------------------------------------------------------------------------------- 464 // command format: 465 // size: sizeof(effect_config_t) 466 // data: effect_config_t 467 //-------------------------------------------------------------------------------------------------- 468 // reply format: 469 // size: sizeof(int) 470 // data: status 471 //================================================================================================== 472 // command: EFFECT_CMD_RESET 473 //-------------------------------------------------------------------------------------------------- 474 // description: 475 // Reset the effect engine. Keep configuration but resets state and buffer content 476 //-------------------------------------------------------------------------------------------------- 477 // command format: 478 // size: 0 479 // data: N/A 480 //-------------------------------------------------------------------------------------------------- 481 // reply format: 482 // size: 0 483 // data: N/A 484 //================================================================================================== 485 // command: EFFECT_CMD_ENABLE 486 //-------------------------------------------------------------------------------------------------- 487 // description: 488 // Enable the process. Called by the framework before the first call to process() 489 //-------------------------------------------------------------------------------------------------- 490 // command format: 491 // size: 0 492 // data: N/A 493 //-------------------------------------------------------------------------------------------------- 494 // reply format: 495 // size: sizeof(int) 496 // data: status 497 //================================================================================================== 498 // command: EFFECT_CMD_DISABLE 499 //-------------------------------------------------------------------------------------------------- 500 // description: 501 // Disable the process. Called by the framework after the last call to process() 502 //-------------------------------------------------------------------------------------------------- 503 // command format: 504 // size: 0 505 // data: N/A 506 //-------------------------------------------------------------------------------------------------- 507 // reply format: 508 // size: sizeof(int) 509 // data: status 510 //================================================================================================== 511 // command: EFFECT_CMD_SET_PARAM 512 //-------------------------------------------------------------------------------------------------- 513 // description: 514 // Set a parameter and apply it immediately 515 //-------------------------------------------------------------------------------------------------- 516 // command format: 517 // size: sizeof(effect_param_t) + size of param and value 518 // data: effect_param_t + param + value. See effect_param_t definition below for value offset 519 //-------------------------------------------------------------------------------------------------- 520 // reply format: 521 // size: sizeof(int) 522 // data: status 523 //================================================================================================== 524 // command: EFFECT_CMD_SET_PARAM_DEFERRED 525 //-------------------------------------------------------------------------------------------------- 526 // description: 527 // Set a parameter but apply it only when receiving EFFECT_CMD_SET_PARAM_COMMIT command 528 //-------------------------------------------------------------------------------------------------- 529 // command format: 530 // size: sizeof(effect_param_t) + size of param and value 531 // data: effect_param_t + param + value. See effect_param_t definition below for value offset 532 //-------------------------------------------------------------------------------------------------- 533 // reply format: 534 // size: 0 535 // data: N/A 536 //================================================================================================== 537 // command: EFFECT_CMD_SET_PARAM_COMMIT 538 //-------------------------------------------------------------------------------------------------- 539 // description: 540 // Apply all previously received EFFECT_CMD_SET_PARAM_DEFERRED commands 541 //-------------------------------------------------------------------------------------------------- 542 // command format: 543 // size: 0 544 // data: N/A 545 //-------------------------------------------------------------------------------------------------- 546 // reply format: 547 // size: sizeof(int) 548 // data: status 549 //================================================================================================== 550 // command: EFFECT_CMD_GET_PARAM 551 //-------------------------------------------------------------------------------------------------- 552 // description: 553 // Get a parameter value 554 //-------------------------------------------------------------------------------------------------- 555 // command format: 556 // size: sizeof(effect_param_t) + size of param 557 // data: effect_param_t + param 558 //-------------------------------------------------------------------------------------------------- 559 // reply format: 560 // size: sizeof(effect_param_t) + size of param and value 561 // data: effect_param_t + param + value. See effect_param_t definition below for value offset 562 //================================================================================================== 563 // command: EFFECT_CMD_SET_DEVICE 564 //-------------------------------------------------------------------------------------------------- 565 // description: 566 // Set the rendering device the audio output path is connected to. See audio.h, audio_devices_t 567 // for device values. 568 // The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this 569 // command when the device changes 570 //-------------------------------------------------------------------------------------------------- 571 // command format: 572 // size: sizeof(uint32_t) 573 // data: uint32_t 574 //-------------------------------------------------------------------------------------------------- 575 // reply format: 576 // size: 0 577 // data: N/A 578 //================================================================================================== 579 // command: EFFECT_CMD_SET_VOLUME 580 //-------------------------------------------------------------------------------------------------- 581 // description: 582 // Set and get volume. Used by audio framework to delegate volume control to effect engine. 583 // The effect implementation must set EFFECT_FLAG_VOLUME_IND or EFFECT_FLAG_VOLUME_CTRL flag in 584 // its descriptor to receive this command before every call to process() function 585 // If EFFECT_FLAG_VOLUME_CTRL flag is set in the effect descriptor, the effect engine must return 586 // the volume that should be applied before the effect is processed. The overall volume (the volume 587 // actually applied by the effect engine multiplied by the returned value) should match the value 588 // indicated in the command. 589 //-------------------------------------------------------------------------------------------------- 590 // command format: 591 // size: n * sizeof(uint32_t) 592 // data: volume for each channel defined in effect_config_t for output buffer expressed in 593 // 8.24 fixed point format 594 //-------------------------------------------------------------------------------------------------- 595 // reply format: 596 // size: n * sizeof(uint32_t) / 0 597 // data: - if EFFECT_FLAG_VOLUME_CTRL is set in effect descriptor: 598 // volume for each channel defined in effect_config_t for output buffer expressed in 599 // 8.24 fixed point format 600 // - if EFFECT_FLAG_VOLUME_CTRL is not set in effect descriptor: 601 // N/A 602 // It is legal to receive a null pointer as pReplyData in which case the effect framework has 603 // delegated volume control to another effect 604 //================================================================================================== 605 // command: EFFECT_CMD_SET_AUDIO_MODE 606 //-------------------------------------------------------------------------------------------------- 607 // description: 608 // Set the audio mode. The effect implementation must set EFFECT_FLAG_AUDIO_MODE_IND flag in its 609 // descriptor to receive this command when the audio mode changes. 610 //-------------------------------------------------------------------------------------------------- 611 // command format: 612 // size: sizeof(uint32_t) 613 // data: audio_mode_t 614 //-------------------------------------------------------------------------------------------------- 615 // reply format: 616 // size: 0 617 // data: N/A 618 //================================================================================================== 619 // command: EFFECT_CMD_SET_CONFIG_REVERSE 620 //-------------------------------------------------------------------------------------------------- 621 // description: 622 // Apply new audio parameters configurations for input and output buffers of reverse stream. 623 // An example of reverse stream is the echo reference supplied to an Acoustic Echo Canceler. 624 //-------------------------------------------------------------------------------------------------- 625 // command format: 626 // size: sizeof(effect_config_t) 627 // data: effect_config_t 628 //-------------------------------------------------------------------------------------------------- 629 // reply format: 630 // size: sizeof(int) 631 // data: status 632 //================================================================================================== 633 // command: EFFECT_CMD_SET_INPUT_DEVICE 634 //-------------------------------------------------------------------------------------------------- 635 // description: 636 // Set the capture device the audio input path is connected to. See audio.h, audio_devices_t 637 // for device values. 638 // The effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to receive this 639 // command when the device changes 640 //-------------------------------------------------------------------------------------------------- 641 // command format: 642 // size: sizeof(uint32_t) 643 // data: uint32_t 644 //-------------------------------------------------------------------------------------------------- 645 // reply format: 646 // size: 0 647 // data: N/A 648 //================================================================================================== 649 // command: EFFECT_CMD_GET_CONFIG 650 //-------------------------------------------------------------------------------------------------- 651 // description: 652 // Read audio parameters configurations for input and output buffers 653 //-------------------------------------------------------------------------------------------------- 654 // command format: 655 // size: 0 656 // data: N/A 657 //-------------------------------------------------------------------------------------------------- 658 // reply format: 659 // size: sizeof(effect_config_t) 660 // data: effect_config_t 661 //================================================================================================== 662 // command: EFFECT_CMD_GET_CONFIG_REVERSE 663 //-------------------------------------------------------------------------------------------------- 664 // description: 665 // Read audio parameters configurations for input and output buffers of reverse stream 666 //-------------------------------------------------------------------------------------------------- 667 // command format: 668 // size: 0 669 // data: N/A 670 //-------------------------------------------------------------------------------------------------- 671 // reply format: 672 // size: sizeof(effect_config_t) 673 // data: effect_config_t 674 //================================================================================================== 675 // command: EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS 676 //-------------------------------------------------------------------------------------------------- 677 // description: 678 // Queries for supported configurations for a particular feature (e.g. get the supported 679 // combinations of main and auxiliary channels for a noise suppressor). 680 // The command parameter is the feature identifier (See effect_feature_e for a list of defined 681 // features) followed by the maximum number of configuration descriptor to return. 682 // The reply is composed of: 683 // - status (uint32_t): 684 // - 0 if feature is supported 685 // - -ENOSYS if the feature is not supported, 686 // - -ENOMEM if the feature is supported but the total number of supported configurations 687 // exceeds the maximum number indicated by the caller. 688 // - total number of supported configurations (uint32_t) 689 // - an array of configuration descriptors. 690 // The actual number of descriptors returned must not exceed the maximum number indicated by 691 // the caller. 692 //-------------------------------------------------------------------------------------------------- 693 // command format: 694 // size: 2 x sizeof(uint32_t) 695 // data: effect_feature_e + maximum number of configurations to return 696 //-------------------------------------------------------------------------------------------------- 697 // reply format: 698 // size: 2 x sizeof(uint32_t) + n x sizeof (<config descriptor>) 699 // data: status + total number of configurations supported + array of n config descriptors 700 //================================================================================================== 701 // command: EFFECT_CMD_GET_FEATURE_CONFIG 702 //-------------------------------------------------------------------------------------------------- 703 // description: 704 // Retrieves current configuration for a given feature. 705 // The reply status is: 706 // - 0 if feature is supported 707 // - -ENOSYS if the feature is not supported, 708 //-------------------------------------------------------------------------------------------------- 709 // command format: 710 // size: sizeof(uint32_t) 711 // data: effect_feature_e 712 //-------------------------------------------------------------------------------------------------- 713 // reply format: 714 // size: sizeof(uint32_t) + sizeof (<config descriptor>) 715 // data: status + config descriptor 716 //================================================================================================== 717 // command: EFFECT_CMD_SET_FEATURE_CONFIG 718 //-------------------------------------------------------------------------------------------------- 719 // description: 720 // Sets current configuration for a given feature. 721 // The reply status is: 722 // - 0 if feature is supported 723 // - -ENOSYS if the feature is not supported, 724 // - -EINVAL if the configuration is invalid 725 //-------------------------------------------------------------------------------------------------- 726 // command format: 727 // size: sizeof(uint32_t) + sizeof (<config descriptor>) 728 // data: effect_feature_e + config descriptor 729 //-------------------------------------------------------------------------------------------------- 730 // reply format: 731 // size: sizeof(uint32_t) 732 // data: status 733 //================================================================================================== 734 // command: EFFECT_CMD_SET_AUDIO_SOURCE 735 //-------------------------------------------------------------------------------------------------- 736 // description: 737 // Set the audio source the capture path is configured for (Camcorder, voice recognition...). 738 // See audio.h, audio_source_t for values. 739 //-------------------------------------------------------------------------------------------------- 740 // command format: 741 // size: sizeof(uint32_t) 742 // data: uint32_t 743 //-------------------------------------------------------------------------------------------------- 744 // reply format: 745 // size: 0 746 // data: N/A 747 //================================================================================================== 748 // command: EFFECT_CMD_OFFLOAD 749 //-------------------------------------------------------------------------------------------------- 750 // description: 751 // 1.indicate if the playback thread the effect is attached to is offloaded or not 752 // 2.update the io handle of the playback thread the effect is attached to 753 //-------------------------------------------------------------------------------------------------- 754 // command format: 755 // size: sizeof(effect_offload_param_t) 756 // data: effect_offload_param_t 757 //-------------------------------------------------------------------------------------------------- 758 // reply format: 759 // size: sizeof(uint32_t) 760 // data: uint32_t 761 //-------------------------------------------------------------------------------------------------- 762 // command: EFFECT_CMD_FIRST_PROPRIETARY 763 //-------------------------------------------------------------------------------------------------- 764 // description: 765 // All proprietary effect commands must use command codes above this value. The size and format of 766 // command and response fields is free in this case 767 //================================================================================================== 768 769 770 // Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t 771 // structure. Multi-channel audio is always interleaved. The channel order is from LSB to MSB with 772 // regard to the channel mask definition in audio.h, audio_channel_mask_t e.g : 773 // Stereo: left, right 774 // 5 point 1: front left, front right, front center, low frequency, back left, back right 775 // The buffer size is expressed in frame count, a frame being composed of samples for all 776 // channels at a given time. Frame size for unspecified format (AUDIO_FORMAT_OTHER) is 8 bit by 777 // definition 778 struct audio_buffer_s { 779 size_t frameCount; // number of frames in buffer 780 union { 781 void* raw; // raw pointer to start of buffer 782 int32_t* s32; // pointer to signed 32 bit data at start of buffer 783 int16_t* s16; // pointer to signed 16 bit data at start of buffer 784 uint8_t* u8; // pointer to unsigned 8 bit data at start of buffer 785 }; 786 }; 787 788 // The buffer_provider_s structure contains functions that can be used 789 // by the effect engine process() function to query and release input 790 // or output audio buffer. 791 // The getBuffer() function is called to retrieve a buffer where data 792 // should read from or written to by process() function. 793 // The releaseBuffer() function MUST be called when the buffer retrieved 794 // with getBuffer() is not needed anymore. 795 // The process function should use the buffer provider mechanism to retrieve 796 // input or output buffer if the inBuffer or outBuffer passed as argument is NULL 797 // and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_SET_CONFIG 798 // command did not specify an audio buffer. 799 800 typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer); 801 802 typedef struct buffer_provider_s { 803 buffer_function_t getBuffer; // retrieve next buffer 804 buffer_function_t releaseBuffer; // release used buffer 805 void *cookie; // for use by client of buffer provider functions 806 } buffer_provider_t; 807 808 809 // The buffer_config_s structure specifies the input or output audio format 810 // to be used by the effect engine. It is part of the effect_config_t 811 // structure that defines both input and output buffer configurations and is 812 // passed by the EFFECT_CMD_SET_CONFIG or EFFECT_CMD_SET_CONFIG_REVERSE command. 813 typedef struct buffer_config_s { 814 audio_buffer_t buffer; // buffer for use by process() function if not passed explicitly 815 uint32_t samplingRate; // sampling rate 816 uint32_t channels; // channel mask (see audio_channel_mask_t in audio.h) 817 buffer_provider_t bufferProvider; // buffer provider 818 uint8_t format; // Audio format (see audio_format_t in audio.h) 819 uint8_t accessMode; // read/write or accumulate in buffer (effect_buffer_access_e) 820 uint16_t mask; // indicates which of the above fields is valid 821 } buffer_config_t; 822 823 // Values for "accessMode" field of buffer_config_t: 824 // overwrite, read only, accumulate (read/modify/write) 825 enum effect_buffer_access_e { 826 EFFECT_BUFFER_ACCESS_WRITE, 827 EFFECT_BUFFER_ACCESS_READ, 828 EFFECT_BUFFER_ACCESS_ACCUMULATE 829 830 }; 831 832 // feature identifiers for EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS command 833 enum effect_feature_e { 834 EFFECT_FEATURE_AUX_CHANNELS, // supports auxiliary channels (e.g. dual mic noise suppressor) 835 EFFECT_FEATURE_CNT 836 }; 837 838 // EFFECT_FEATURE_AUX_CHANNELS feature configuration descriptor. Describe a combination 839 // of main and auxiliary channels supported 840 typedef struct channel_config_s { 841 audio_channel_mask_t main_channels; // channel mask for main channels 842 audio_channel_mask_t aux_channels; // channel mask for auxiliary channels 843 } channel_config_t; 844 845 846 // Values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field 847 // in buffer_config_t must be taken into account when executing the EFFECT_CMD_SET_CONFIG command 848 #define EFFECT_CONFIG_BUFFER 0x0001 // buffer field must be taken into account 849 #define EFFECT_CONFIG_SMP_RATE 0x0002 // samplingRate field must be taken into account 850 #define EFFECT_CONFIG_CHANNELS 0x0004 // channels field must be taken into account 851 #define EFFECT_CONFIG_FORMAT 0x0008 // format field must be taken into account 852 #define EFFECT_CONFIG_ACC_MODE 0x0010 // accessMode field must be taken into account 853 #define EFFECT_CONFIG_PROVIDER 0x0020 // bufferProvider field must be taken into account 854 #define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \ 855 EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \ 856 EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER) 857 858 859 // effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_CONFIG 860 // command to configure audio parameters and buffers for effect engine input and output. 861 typedef struct effect_config_s { 862 buffer_config_t inputCfg; 863 buffer_config_t outputCfg; 864 } effect_config_t; 865 866 867 // effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM 868 // command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command. 869 // psize and vsize represent the actual size of parameter and value. 870 // 871 // NOTE: the start of value field inside the data field is always on a 32 bit boundary: 872 // 873 // +-----------+ 874 // | status | sizeof(int) 875 // +-----------+ 876 // | psize | sizeof(int) 877 // +-----------+ 878 // | vsize | sizeof(int) 879 // +-----------+ 880 // | | | | 881 // ~ parameter ~ > psize | 882 // | | | > ((psize - 1)/sizeof(int) + 1) * sizeof(int) 883 // +-----------+ | 884 // | padding | | 885 // +-----------+ 886 // | | | 887 // ~ value ~ > vsize 888 // | | | 889 // +-----------+ 890 891 typedef struct effect_param_s { 892 int32_t status; // Transaction status (unused for command, used for reply) 893 uint32_t psize; // Parameter size 894 uint32_t vsize; // Value size 895 char data[]; // Start of Parameter + Value data 896 } effect_param_t; 897 898 // structure used by EFFECT_CMD_OFFLOAD command 899 typedef struct effect_offload_param_s { 900 bool isOffload; // true if the playback thread the effect is attached to is offloaded 901 int ioHandle; // io handle of the playback thread the effect is attached to 902 } effect_offload_param_t; 903 904 905 ///////////////////////////////////////////////// 906 // Effect library interface 907 ///////////////////////////////////////////////// 908 909 // Effect library interface version 3.0 910 // Note that EffectsFactory.c only checks the major version component, so changes to the minor 911 // number can only be used for fully backwards compatible changes 912 #define EFFECT_LIBRARY_API_VERSION EFFECT_MAKE_API_VERSION(3,0) 913 914 #define AUDIO_EFFECT_LIBRARY_TAG ((('A') << 24) | (('E') << 16) | (('L') << 8) | ('T')) 915 916 // Every effect library must have a data structure named AUDIO_EFFECT_LIBRARY_INFO_SYM 917 // and the fields of this data structure must begin with audio_effect_library_t 918 919 typedef struct audio_effect_library_s { 920 // tag must be initialized to AUDIO_EFFECT_LIBRARY_TAG 921 uint32_t tag; 922 // Version of the effect library API : 0xMMMMmmmm MMMM: Major, mmmm: minor 923 uint32_t version; 924 // Name of this library 925 const char *name; 926 // Author/owner/implementor of the library 927 const char *implementor; 928 929 //////////////////////////////////////////////////////////////////////////////// 930 // 931 // Function: create_effect 932 // 933 // Description: Creates an effect engine of the specified implementation uuid and 934 // returns an effect control interface on this engine. The function will allocate the 935 // resources for an instance of the requested effect engine and return 936 // a handle on the effect control interface. 937 // 938 // Input: 939 // uuid: pointer to the effect uuid. 940 // sessionId: audio session to which this effect instance will be attached. All effects 941 // created with the same session ID are connected in series and process the same signal 942 // stream. Knowing that two effects are part of the same effect chain can help the 943 // library implement some kind of optimizations. 944 // ioId: identifies the output or input stream this effect is directed to at audio HAL. 945 // For future use especially with tunneled HW accelerated effects 946 // 947 // Input/Output: 948 // pHandle: address where to return the effect interface handle. 949 // 950 // Output: 951 // returned value: 0 successful operation. 952 // -ENODEV library failed to initialize 953 // -EINVAL invalid pEffectUuid or pHandle 954 // -ENOENT no effect with this uuid found 955 // *pHandle: updated with the effect interface handle. 956 // 957 //////////////////////////////////////////////////////////////////////////////// 958 int32_t (*create_effect)(const effect_uuid_t *uuid, 959 int32_t sessionId, 960 int32_t ioId, 961 effect_handle_t *pHandle); 962 963 //////////////////////////////////////////////////////////////////////////////// 964 // 965 // Function: release_effect 966 // 967 // Description: Releases the effect engine whose handle is given as argument. 968 // All resources allocated to this particular instance of the effect are 969 // released. 970 // 971 // Input: 972 // handle: handle on the effect interface to be released. 973 // 974 // Output: 975 // returned value: 0 successful operation. 976 // -ENODEV library failed to initialize 977 // -EINVAL invalid interface handle 978 // 979 //////////////////////////////////////////////////////////////////////////////// 980 int32_t (*release_effect)(effect_handle_t handle); 981 982 //////////////////////////////////////////////////////////////////////////////// 983 // 984 // Function: get_descriptor 985 // 986 // Description: Returns the descriptor of the effect engine which implementation UUID is 987 // given as argument. 988 // 989 // Input/Output: 990 // uuid: pointer to the effect uuid. 991 // pDescriptor: address where to return the effect descriptor. 992 // 993 // Output: 994 // returned value: 0 successful operation. 995 // -ENODEV library failed to initialize 996 // -EINVAL invalid pDescriptor or uuid 997 // *pDescriptor: updated with the effect descriptor. 998 // 999 //////////////////////////////////////////////////////////////////////////////// 1000 int32_t (*get_descriptor)(const effect_uuid_t *uuid, 1001 effect_descriptor_t *pDescriptor); 1002 } audio_effect_library_t; 1003 1004 // Name of the hal_module_info 1005 #define AUDIO_EFFECT_LIBRARY_INFO_SYM AELI 1006 1007 // Name of the hal_module_info as a string 1008 #define AUDIO_EFFECT_LIBRARY_INFO_SYM_AS_STR "AELI" 1009 1010 __END_DECLS 1011 1012 #endif // ANDROID_AUDIO_EFFECT_H 1013
