1 /* 2 * Copyright (C) 2006 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef ANDROID_RIL_H 18 #define ANDROID_RIL_H 1 19 20 #include <stdlib.h> 21 #include <stdint.h> 22 #include <telephony/ril_cdma_sms.h> 23 #include <telephony/ril_nv_items.h> 24 #include <telephony/ril_msim.h> 25 26 #ifndef FEATURE_UNIT_TEST 27 #include <sys/time.h> 28 #endif /* !FEATURE_UNIT_TEST */ 29 30 #ifdef __cplusplus 31 extern "C" { 32 #endif 33 34 35 #if defined(ANDROID_SIM_COUNT_2) 36 #define SIM_COUNT 2 37 #elif defined(ANDROID_SIM_COUNT_3) 38 #define SIM_COUNT 3 39 #elif defined(ANDROID_SIM_COUNT_4) 40 #define SIM_COUNT 4 41 #else 42 #define SIM_COUNT 1 43 #endif 44 45 #ifndef ANDROID_MULTI_SIM 46 #define SIM_COUNT 1 47 #endif 48 49 #define RIL_VERSION 11 /* Current version */ 50 #define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */ 51 52 #define CDMA_ALPHA_INFO_BUFFER_LENGTH 64 53 #define CDMA_NUMBER_INFO_BUFFER_LENGTH 81 54 55 #define MAX_RILDS 3 56 #define MAX_SOCKET_NAME_LENGTH 6 57 #define MAX_CLIENT_ID_LENGTH 2 58 #define MAX_DEBUG_SOCKET_NAME_LENGTH 12 59 #define MAX_QEMU_PIPE_NAME_LENGTH 11 60 #define MAX_UUID_LENGTH 64 61 62 63 typedef void * RIL_Token; 64 65 typedef enum { 66 RIL_SOCKET_1, 67 #if (SIM_COUNT >= 2) 68 RIL_SOCKET_2, 69 #if (SIM_COUNT >= 3) 70 RIL_SOCKET_3, 71 #endif 72 #if (SIM_COUNT >= 4) 73 RIL_SOCKET_4, 74 #endif 75 #endif 76 RIL_SOCKET_NUM 77 } RIL_SOCKET_ID; 78 79 80 typedef enum { 81 RIL_E_SUCCESS = 0, 82 RIL_E_RADIO_NOT_AVAILABLE = 1, /* If radio did not start or is resetting */ 83 RIL_E_GENERIC_FAILURE = 2, 84 RIL_E_PASSWORD_INCORRECT = 3, /* for PIN/PIN2 methods only! */ 85 RIL_E_SIM_PIN2 = 4, /* Operation requires SIM PIN2 to be entered */ 86 RIL_E_SIM_PUK2 = 5, /* Operation requires SIM PIN2 to be entered */ 87 RIL_E_REQUEST_NOT_SUPPORTED = 6, 88 RIL_E_CANCELLED = 7, 89 RIL_E_OP_NOT_ALLOWED_DURING_VOICE_CALL = 8, /* data ops are not allowed during voice 90 call on a Class C GPRS device */ 91 RIL_E_OP_NOT_ALLOWED_BEFORE_REG_TO_NW = 9, /* data ops are not allowed before device 92 registers in network */ 93 RIL_E_SMS_SEND_FAIL_RETRY = 10, /* fail to send sms and need retry */ 94 RIL_E_SIM_ABSENT = 11, /* fail to set the location where CDMA subscription 95 shall be retrieved because of SIM or RUIM 96 card absent */ 97 RIL_E_SUBSCRIPTION_NOT_AVAILABLE = 12, /* fail to find CDMA subscription from specified 98 location */ 99 RIL_E_MODE_NOT_SUPPORTED = 13, /* HW does not support preferred network type */ 100 RIL_E_FDN_CHECK_FAILURE = 14, /* command failed because recipient is not on FDN list */ 101 RIL_E_ILLEGAL_SIM_OR_ME = 15, /* network selection failed due to 102 illegal SIM or ME */ 103 RIL_E_MISSING_RESOURCE = 16, /* no logical channel available */ 104 RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */ 105 RIL_E_DIAL_MODIFIED_TO_USSD = 18, /* DIAL request modified to USSD */ 106 RIL_E_DIAL_MODIFIED_TO_SS = 19, /* DIAL request modified to SS */ 107 RIL_E_DIAL_MODIFIED_TO_DIAL = 20, /* DIAL request modified to DIAL with different 108 data */ 109 RIL_E_USSD_MODIFIED_TO_DIAL = 21, /* USSD request modified to DIAL */ 110 RIL_E_USSD_MODIFIED_TO_SS = 22, /* USSD request modified to SS */ 111 RIL_E_USSD_MODIFIED_TO_USSD = 23, /* USSD request modified to different USSD 112 request */ 113 RIL_E_SS_MODIFIED_TO_DIAL = 24, /* SS request modified to DIAL */ 114 RIL_E_SS_MODIFIED_TO_USSD = 25, /* SS request modified to USSD */ 115 RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26, /* Subscription not supported by RIL */ 116 RIL_E_SS_MODIFIED_TO_SS = 27 /* SS request modified to different SS request */ 117 118 119 } RIL_Errno; 120 121 typedef enum { 122 RIL_CALL_ACTIVE = 0, 123 RIL_CALL_HOLDING = 1, 124 RIL_CALL_DIALING = 2, /* MO call only */ 125 RIL_CALL_ALERTING = 3, /* MO call only */ 126 RIL_CALL_INCOMING = 4, /* MT call only */ 127 RIL_CALL_WAITING = 5 /* MT call only */ 128 } RIL_CallState; 129 130 typedef enum { 131 RADIO_STATE_OFF = 0, /* Radio explictly powered off (eg CFUN=0) */ 132 RADIO_STATE_UNAVAILABLE = 1, /* Radio unavailable (eg, resetting or not booted) */ 133 /* States 2-9 below are deprecated. Just leaving them here for backward compatibility. */ 134 RADIO_STATE_SIM_NOT_READY = 2, /* Radio is on, but the SIM interface is not ready */ 135 RADIO_STATE_SIM_LOCKED_OR_ABSENT = 3, /* SIM PIN locked, PUK required, network 136 personalization locked, or SIM absent */ 137 RADIO_STATE_SIM_READY = 4, /* Radio is on and SIM interface is available */ 138 RADIO_STATE_RUIM_NOT_READY = 5, /* Radio is on, but the RUIM interface is not ready */ 139 RADIO_STATE_RUIM_READY = 6, /* Radio is on and the RUIM interface is available */ 140 RADIO_STATE_RUIM_LOCKED_OR_ABSENT = 7, /* RUIM PIN locked, PUK required, network 141 personalization locked, or RUIM absent */ 142 RADIO_STATE_NV_NOT_READY = 8, /* Radio is on, but the NV interface is not available */ 143 RADIO_STATE_NV_READY = 9, /* Radio is on and the NV interface is available */ 144 RADIO_STATE_ON = 10 /* Radio is on */ 145 } RIL_RadioState; 146 147 typedef enum { 148 RADIO_TECH_UNKNOWN = 0, 149 RADIO_TECH_GPRS = 1, 150 RADIO_TECH_EDGE = 2, 151 RADIO_TECH_UMTS = 3, 152 RADIO_TECH_IS95A = 4, 153 RADIO_TECH_IS95B = 5, 154 RADIO_TECH_1xRTT = 6, 155 RADIO_TECH_EVDO_0 = 7, 156 RADIO_TECH_EVDO_A = 8, 157 RADIO_TECH_HSDPA = 9, 158 RADIO_TECH_HSUPA = 10, 159 RADIO_TECH_HSPA = 11, 160 RADIO_TECH_EVDO_B = 12, 161 RADIO_TECH_EHRPD = 13, 162 RADIO_TECH_LTE = 14, 163 RADIO_TECH_HSPAP = 15, // HSPA+ 164 RADIO_TECH_GSM = 16, // Only supports voice 165 RADIO_TECH_TD_SCDMA = 17 166 } RIL_RadioTechnology; 167 168 typedef enum { 169 RAF_UNKNOWN = (1 << RADIO_TECH_UNKNOWN), 170 RAF_GPRS = (1 << RADIO_TECH_GPRS), 171 RAF_EDGE = (1 << RADIO_TECH_EDGE), 172 RAF_UMTS = (1 << RADIO_TECH_UMTS), 173 RAF_IS95A = (1 << RADIO_TECH_IS95A), 174 RAF_IS95B = (1 << RADIO_TECH_IS95B), 175 RAF_1xRTT = (1 << RADIO_TECH_1xRTT), 176 RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0), 177 RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A), 178 RAF_HSDPA = (1 << RADIO_TECH_HSDPA), 179 RAF_HSUPA = (1 << RADIO_TECH_HSUPA), 180 RAF_HSPA = (1 << RADIO_TECH_HSPA), 181 RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B), 182 RAF_EHRPD = (1 << RADIO_TECH_EHRPD), 183 RAF_LTE = (1 << RADIO_TECH_LTE), 184 RAF_HSPAP = (1 << RADIO_TECH_HSPAP), 185 RAF_GSM = (1 << RADIO_TECH_GSM), 186 RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA), 187 } RIL_RadioAccessFamily; 188 189 typedef enum { 190 RC_PHASE_CONFIGURED = 0, // LM is configured is initial value and value after FINISH completes 191 RC_PHASE_START = 1, // START is sent before Apply and indicates that an APPLY will be 192 // forthcoming with these same parameters 193 RC_PHASE_APPLY = 2, // APPLY is sent after all LM's receive START and returned 194 // RIL_RadioCapability.status = 0, if any START's fail no 195 // APPLY will be sent 196 RC_PHASE_UNSOL_RSP = 3, // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY 197 RC_PHASE_FINISH = 4 // FINISH is sent after all commands have completed. If an error 198 // occurs in any previous command the RIL_RadioAccessesFamily and 199 // logicalModemUuid fields will be the prior configuration thus 200 // restoring the configuration to the previous value. An error 201 // returned by this command will generally be ignored or may 202 // cause that logical modem to be removed from service. 203 } RadioCapabilityPhase; 204 205 typedef enum { 206 RC_STATUS_NONE = 0, // This parameter has no meaning with RC_PHASE_START, 207 // RC_PHASE_APPLY 208 RC_STATUS_SUCCESS = 1, // Tell modem the action transaction of set radio 209 // capability was success with RC_PHASE_FINISH 210 RC_STATUS_FAIL = 2, // Tell modem the action transaction of set radio 211 // capability is fail with RC_PHASE_FINISH. 212 } RadioCapabilityStatus; 213 214 #define RIL_RADIO_CAPABILITY_VERSION 1 215 typedef struct { 216 int version; // Version of structure, RIL_RADIO_CAPABILITY_VERSION 217 int session; // Unique session value defined by framework returned in all "responses/unsol" 218 int phase; // CONFIGURED, START, APPLY, FINISH 219 int rat; // RIL_RadioAccessFamily for the radio 220 char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem. 221 int status; // Return status and an input parameter for RC_PHASE_FINISH 222 } RIL_RadioCapability; 223 224 // Do we want to split Data from Voice and the use 225 // RIL_RadioTechnology for get/setPreferredVoice/Data ? 226 typedef enum { 227 PREF_NET_TYPE_GSM_WCDMA = 0, /* GSM/WCDMA (WCDMA preferred) */ 228 PREF_NET_TYPE_GSM_ONLY = 1, /* GSM only */ 229 PREF_NET_TYPE_WCDMA = 2, /* WCDMA */ 230 PREF_NET_TYPE_GSM_WCDMA_AUTO = 3, /* GSM/WCDMA (auto mode, according to PRL) */ 231 PREF_NET_TYPE_CDMA_EVDO_AUTO = 4, /* CDMA and EvDo (auto mode, according to PRL) */ 232 PREF_NET_TYPE_CDMA_ONLY = 5, /* CDMA only */ 233 PREF_NET_TYPE_EVDO_ONLY = 6, /* EvDo only */ 234 PREF_NET_TYPE_GSM_WCDMA_CDMA_EVDO_AUTO = 7, /* GSM/WCDMA, CDMA, and EvDo (auto mode, according to PRL) */ 235 PREF_NET_TYPE_LTE_CDMA_EVDO = 8, /* LTE, CDMA and EvDo */ 236 PREF_NET_TYPE_LTE_GSM_WCDMA = 9, /* LTE, GSM/WCDMA */ 237 PREF_NET_TYPE_LTE_CMDA_EVDO_GSM_WCDMA = 10, /* LTE, CDMA, EvDo, GSM/WCDMA */ 238 PREF_NET_TYPE_LTE_ONLY = 11, /* LTE only */ 239 PREF_NET_TYPE_LTE_WCDMA = 12 /* LTE/WCDMA */ 240 } RIL_PreferredNetworkType; 241 242 /* Source for cdma subscription */ 243 typedef enum { 244 CDMA_SUBSCRIPTION_SOURCE_RUIM_SIM = 0, 245 CDMA_SUBSCRIPTION_SOURCE_NV = 1 246 } RIL_CdmaSubscriptionSource; 247 248 /* User-to-User signaling Info activation types derived from 3GPP 23.087 v8.0 */ 249 typedef enum { 250 RIL_UUS_TYPE1_IMPLICIT = 0, 251 RIL_UUS_TYPE1_REQUIRED = 1, 252 RIL_UUS_TYPE1_NOT_REQUIRED = 2, 253 RIL_UUS_TYPE2_REQUIRED = 3, 254 RIL_UUS_TYPE2_NOT_REQUIRED = 4, 255 RIL_UUS_TYPE3_REQUIRED = 5, 256 RIL_UUS_TYPE3_NOT_REQUIRED = 6 257 } RIL_UUS_Type; 258 259 /* User-to-User Signaling Information data coding schemes. Possible values for 260 * Octet 3 (Protocol Discriminator field) in the UUIE. The values have been 261 * specified in section 10.5.4.25 of 3GPP TS 24.008 */ 262 typedef enum { 263 RIL_UUS_DCS_USP = 0, /* User specified protocol */ 264 RIL_UUS_DCS_OSIHLP = 1, /* OSI higher layer protocol */ 265 RIL_UUS_DCS_X244 = 2, /* X.244 */ 266 RIL_UUS_DCS_RMCF = 3, /* Reserved for system mangement 267 convergence function */ 268 RIL_UUS_DCS_IA5c = 4 /* IA5 characters */ 269 } RIL_UUS_DCS; 270 271 /* User-to-User Signaling Information defined in 3GPP 23.087 v8.0 272 * This data is passed in RIL_ExtensionRecord and rec contains this 273 * structure when type is RIL_UUS_INFO_EXT_REC */ 274 typedef struct { 275 RIL_UUS_Type uusType; /* UUS Type */ 276 RIL_UUS_DCS uusDcs; /* UUS Data Coding Scheme */ 277 int uusLength; /* Length of UUS Data */ 278 char * uusData; /* UUS Data */ 279 } RIL_UUS_Info; 280 281 /* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */ 282 typedef struct { 283 char isPresent; /* non-zero if signal information record is present */ 284 char signalType; /* as defined 3.7.5.5-1 */ 285 char alertPitch; /* as defined 3.7.5.5-2 */ 286 char signal; /* as defined 3.7.5.5-3, 3.7.5.5-4 or 3.7.5.5-5 */ 287 } RIL_CDMA_SignalInfoRecord; 288 289 typedef struct { 290 RIL_CallState state; 291 int index; /* Connection Index for use with, eg, AT+CHLD */ 292 int toa; /* type of address, eg 145 = intl */ 293 char isMpty; /* nonzero if is mpty call */ 294 char isMT; /* nonzero if call is mobile terminated */ 295 char als; /* ALS line indicator if available 296 (0 = line 1) */ 297 char isVoice; /* nonzero if this is is a voice call */ 298 char isVoicePrivacy; /* nonzero if CDMA voice privacy mode is active */ 299 char * number; /* Remote party number */ 300 int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */ 301 char * name; /* Remote party name */ 302 int namePresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */ 303 RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */ 304 } RIL_Call; 305 306 /* Deprecated, use RIL_Data_Call_Response_v6 */ 307 typedef struct { 308 int cid; /* Context ID, uniquely identifies this call */ 309 int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ 310 char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. 311 For example, "IP", "IPV6", "IPV4V6", or "PPP". */ 312 char * apn; /* ignored */ 313 char * address; /* An address, e.g., "192.0.1.3" or "2001:db8::1". */ 314 } RIL_Data_Call_Response_v4; 315 316 /* 317 * Returned by RIL_REQUEST_SETUP_DATA_CALL, RIL_REQUEST_DATA_CALL_LIST 318 * and RIL_UNSOL_DATA_CALL_LIST_CHANGED, on error status != 0. 319 */ 320 typedef struct { 321 int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ 322 int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry 323 back-off timer value RIL wants to override the one 324 pre-configured in FW. 325 The unit is miliseconds. 326 The value < 0 means no value is suggested. 327 The value 0 means retry should be done ASAP. 328 The value of INT_MAX(0x7fffffff) means no retry. */ 329 int cid; /* Context ID, uniquely identifies this call */ 330 int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ 331 char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. 332 For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is 333 PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported 334 such as "IP" or "IPV6" */ 335 char * ifname; /* The network interface name */ 336 char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, 337 e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". 338 May not be empty, typically 1 IPv4 or 1 IPv6 or 339 one of each. If the prefix length is absent the addresses 340 are assumed to be point to point with IPv4 having a prefix 341 length of 32 and IPv6 128. */ 342 char * dnses; /* A space-delimited list of DNS server addresses, 343 e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". 344 May be empty. */ 345 char * gateways; /* A space-delimited list of default gateway addresses, 346 e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". 347 May be empty in which case the addresses represent point 348 to point connections. */ 349 } RIL_Data_Call_Response_v6; 350 351 typedef struct { 352 int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ 353 int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry 354 back-off timer value RIL wants to override the one 355 pre-configured in FW. 356 The unit is miliseconds. 357 The value < 0 means no value is suggested. 358 The value 0 means retry should be done ASAP. 359 The value of INT_MAX(0x7fffffff) means no retry. */ 360 int cid; /* Context ID, uniquely identifies this call */ 361 int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ 362 char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. 363 For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is 364 PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported 365 such as "IP" or "IPV6" */ 366 char * ifname; /* The network interface name */ 367 char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, 368 e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". 369 May not be empty, typically 1 IPv4 or 1 IPv6 or 370 one of each. If the prefix length is absent the addresses 371 are assumed to be point to point with IPv4 having a prefix 372 length of 32 and IPv6 128. */ 373 char * dnses; /* A space-delimited list of DNS server addresses, 374 e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". 375 May be empty. */ 376 char * gateways; /* A space-delimited list of default gateway addresses, 377 e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". 378 May be empty in which case the addresses represent point 379 to point connections. */ 380 char * pcscf; /* the Proxy Call State Control Function address 381 via PCO(Protocol Configuration Option) for IMS client. */ 382 } RIL_Data_Call_Response_v9; 383 384 typedef struct { 385 int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ 386 int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry 387 back-off timer value RIL wants to override the one 388 pre-configured in FW. 389 The unit is miliseconds. 390 The value < 0 means no value is suggested. 391 The value 0 means retry should be done ASAP. 392 The value of INT_MAX(0x7fffffff) means no retry. */ 393 int cid; /* Context ID, uniquely identifies this call */ 394 int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ 395 char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. 396 For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is 397 PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported 398 such as "IP" or "IPV6" */ 399 char * ifname; /* The network interface name */ 400 char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, 401 e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". 402 May not be empty, typically 1 IPv4 or 1 IPv6 or 403 one of each. If the prefix length is absent the addresses 404 are assumed to be point to point with IPv4 having a prefix 405 length of 32 and IPv6 128. */ 406 char * dnses; /* A space-delimited list of DNS server addresses, 407 e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". 408 May be empty. */ 409 char * gateways; /* A space-delimited list of default gateway addresses, 410 e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". 411 May be empty in which case the addresses represent point 412 to point connections. */ 413 char * pcscf; /* the Proxy Call State Control Function address 414 via PCO(Protocol Configuration Option) for IMS client. */ 415 int mtu; /* MTU received from network 416 Value <= 0 means network has either not sent a value or 417 sent an invalid value */ 418 } RIL_Data_Call_Response_v11; 419 420 typedef enum { 421 RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */ 422 RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */ 423 } RIL_RadioTechnologyFamily; 424 425 typedef struct { 426 RIL_RadioTechnologyFamily tech; 427 unsigned char retry; /* 0 == not retry, nonzero == retry */ 428 int messageRef; /* Valid field if retry is set to nonzero. 429 Contains messageRef from RIL_SMS_Response 430 corresponding to failed MO SMS. 431 */ 432 433 union { 434 /* Valid field if tech is RADIO_TECH_3GPP2. See RIL_REQUEST_CDMA_SEND_SMS */ 435 RIL_CDMA_SMS_Message* cdmaMessage; 436 437 /* Valid field if tech is RADIO_TECH_3GPP. See RIL_REQUEST_SEND_SMS */ 438 char** gsmMessage; 439 } message; 440 } RIL_IMS_SMS_Message; 441 442 typedef struct { 443 int messageRef; /* TP-Message-Reference for GSM, 444 and BearerData MessageId for CDMA 445 (See 3GPP2 C.S0015-B, v2.0, table 4.5-1). */ 446 char *ackPDU; /* or NULL if n/a */ 447 int errorCode; /* See 3GPP 27.005, 3.2.5 for GSM/UMTS, 448 3GPP2 N.S0005 (IS-41C) Table 171 for CDMA, 449 -1 if unknown or not applicable*/ 450 } RIL_SMS_Response; 451 452 /** Used by RIL_REQUEST_WRITE_SMS_TO_SIM */ 453 typedef struct { 454 int status; /* Status of message. See TS 27.005 3.1, "<stat>": */ 455 /* 0 = "REC UNREAD" */ 456 /* 1 = "REC READ" */ 457 /* 2 = "STO UNSENT" */ 458 /* 3 = "STO SENT" */ 459 char * pdu; /* PDU of message to write, as an ASCII hex string less the SMSC address, 460 the TP-layer length is "strlen(pdu)/2". */ 461 char * smsc; /* SMSC address in GSM BCD format prefixed by a length byte 462 (as expected by TS 27.005) or NULL for default SMSC */ 463 } RIL_SMS_WriteArgs; 464 465 /** Used by RIL_REQUEST_DIAL */ 466 typedef struct { 467 char * address; 468 int clir; 469 /* (same as 'n' paremeter in TS 27.007 7.7 "+CLIR" 470 * clir == 0 on "use subscription default value" 471 * clir == 1 on "CLIR invocation" (restrict CLI presentation) 472 * clir == 2 on "CLIR suppression" (allow CLI presentation) 473 */ 474 RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */ 475 } RIL_Dial; 476 477 typedef struct { 478 int command; /* one of the commands listed for TS 27.007 +CRSM*/ 479 int fileid; /* EF id */ 480 char *path; /* "pathid" from TS 27.007 +CRSM command. 481 Path is in hex asciii format eg "7f205f70" 482 Path must always be provided. 483 */ 484 int p1; 485 int p2; 486 int p3; 487 char *data; /* May be NULL*/ 488 char *pin2; /* May be NULL*/ 489 } RIL_SIM_IO_v5; 490 491 typedef struct { 492 int command; /* one of the commands listed for TS 27.007 +CRSM*/ 493 int fileid; /* EF id */ 494 char *path; /* "pathid" from TS 27.007 +CRSM command. 495 Path is in hex asciii format eg "7f205f70" 496 Path must always be provided. 497 */ 498 int p1; 499 int p2; 500 int p3; 501 char *data; /* May be NULL*/ 502 char *pin2; /* May be NULL*/ 503 char *aidPtr; /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */ 504 } RIL_SIM_IO_v6; 505 506 /* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and 507 * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */ 508 typedef struct { 509 int sessionid; /* "sessionid" from TS 27.007 +CGLA command. Should be 510 ignored for +CSIM command. */ 511 512 /* Following fields are used to derive the APDU ("command" and "length" 513 values in TS 27.007 +CSIM and +CGLA commands). */ 514 int cla; 515 int instruction; 516 int p1; 517 int p2; 518 int p3; /* A negative P3 implies a 4 byte APDU. */ 519 char *data; /* May be NULL. In hex string format. */ 520 } RIL_SIM_APDU; 521 522 typedef struct { 523 int sw1; 524 int sw2; 525 char *simResponse; /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION 526 response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */ 527 } RIL_SIM_IO_Response; 528 529 /* See also com.android.internal.telephony.gsm.CallForwardInfo */ 530 531 typedef struct { 532 int status; /* 533 * For RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 534 * status 1 = active, 0 = not active 535 * 536 * For RIL_REQUEST_SET_CALL_FORWARD: 537 * status is: 538 * 0 = disable 539 * 1 = enable 540 * 2 = interrogate 541 * 3 = registeration 542 * 4 = erasure 543 */ 544 545 int reason; /* from TS 27.007 7.11 "reason" */ 546 int serviceClass;/* From 27.007 +CCFC/+CLCK "class" 547 See table for Android mapping from 548 MMI service code 549 0 means user doesn't input class */ 550 int toa; /* "type" from TS 27.007 7.11 */ 551 char * number; /* "number" from TS 27.007 7.11. May be NULL */ 552 int timeSeconds; /* for CF no reply only */ 553 }RIL_CallForwardInfo; 554 555 typedef struct { 556 char * cid; /* Combination of LAC and Cell Id in 32 bits in GSM. 557 * Upper 16 bits is LAC and lower 16 bits 558 * is CID (as described in TS 27.005) 559 * Primary Scrambling Code (as described in TS 25.331) 560 * in 9 bits in UMTS 561 * Valid values are hexadecimal 0x0000 - 0xffffffff. 562 */ 563 int rssi; /* Received RSSI in GSM, 564 * Level index of CPICH Received Signal Code Power in UMTS 565 */ 566 } RIL_NeighboringCell; 567 568 /* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */ 569 typedef enum { 570 CALL_FAIL_UNOBTAINABLE_NUMBER = 1, 571 CALL_FAIL_NORMAL = 16, 572 CALL_FAIL_BUSY = 17, 573 CALL_FAIL_CONGESTION = 34, 574 CALL_FAIL_ACM_LIMIT_EXCEEDED = 68, 575 CALL_FAIL_CALL_BARRED = 240, 576 CALL_FAIL_FDN_BLOCKED = 241, 577 CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242, 578 CALL_FAIL_IMEI_NOT_ACCEPTED = 243, 579 CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */ 580 CALL_FAIL_DIAL_MODIFIED_TO_SS = 245, 581 CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246, 582 CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000, 583 CALL_FAIL_CDMA_DROP = 1001, 584 CALL_FAIL_CDMA_INTERCEPT = 1002, 585 CALL_FAIL_CDMA_REORDER = 1003, 586 CALL_FAIL_CDMA_SO_REJECT = 1004, 587 CALL_FAIL_CDMA_RETRY_ORDER = 1005, 588 CALL_FAIL_CDMA_ACCESS_FAILURE = 1006, 589 CALL_FAIL_CDMA_PREEMPTED = 1007, 590 CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed 591 during emergency callback mode */ 592 CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */ 593 CALL_FAIL_ERROR_UNSPECIFIED = 0xffff 594 } RIL_LastCallFailCause; 595 596 /* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */ 597 typedef enum { 598 PDP_FAIL_NONE = 0, /* No error, connection ok */ 599 600 /* an integer cause code defined in TS 24.008 601 section 6.1.3.1.3 or TS 24.301 Release 8+ Annex B. 602 If the implementation does not have access to the exact cause codes, 603 then it should return one of the following values, 604 as the UI layer needs to distinguish these 605 cases for error notification and potential retries. */ 606 PDP_FAIL_OPERATOR_BARRED = 0x08, /* no retry */ 607 PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A, 608 PDP_FAIL_MISSING_UKNOWN_APN = 0x1B, /* no retry */ 609 PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C, /* no retry */ 610 PDP_FAIL_USER_AUTHENTICATION = 0x1D, /* no retry */ 611 PDP_FAIL_ACTIVATION_REJECT_GGSN = 0x1E, /* no retry */ 612 PDP_FAIL_ACTIVATION_REJECT_UNSPECIFIED = 0x1F, 613 PDP_FAIL_SERVICE_OPTION_NOT_SUPPORTED = 0x20, /* no retry */ 614 PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */ 615 PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22, 616 PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */ 617 PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio, 618 based on framework config */ 619 PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */ 620 PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */ 621 PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34, 622 PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */ 623 624 /* Not mentioned in the specification */ 625 PDP_FAIL_VOICE_REGISTRATION_FAIL = -1, 626 PDP_FAIL_DATA_REGISTRATION_FAIL = -2, 627 628 /* reasons for data call drop - network/modem disconnect */ 629 PDP_FAIL_SIGNAL_LOST = -3, 630 PDP_FAIL_PREF_RADIO_TECH_CHANGED = -4,/* preferred technology has changed, should retry 631 with parameters appropriate for new technology */ 632 PDP_FAIL_RADIO_POWER_OFF = -5, /* data call was disconnected because radio was resetting, 633 powered off - no retry */ 634 PDP_FAIL_TETHERED_CALL_ACTIVE = -6, /* data call was disconnected by modem because tethered 635 mode was up on same APN/data profile - no retry until 636 tethered call is off */ 637 638 PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently */ 639 } RIL_DataCallFailCause; 640 641 /* See RIL_REQUEST_SETUP_DATA_CALL */ 642 typedef enum { 643 RIL_DATA_PROFILE_DEFAULT = 0, 644 RIL_DATA_PROFILE_TETHERED = 1, 645 RIL_DATA_PROFILE_IMS = 2, 646 RIL_DATA_PROFILE_FOTA = 3, 647 RIL_DATA_PROFILE_CBS = 4, 648 RIL_DATA_PROFILE_OEM_BASE = 1000, /* Start of OEM-specific profiles */ 649 RIL_DATA_PROFILE_INVALID = 0xFFFFFFFF 650 } RIL_DataProfile; 651 652 /* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */ 653 typedef struct { 654 int notificationType; /* 655 * 0 = MO intermediate result code 656 * 1 = MT unsolicited result code 657 */ 658 int code; /* See 27.007 7.17 659 "code1" for MO 660 "code2" for MT. */ 661 int index; /* CUG index. See 27.007 7.17. */ 662 int type; /* "type" from 27.007 7.17 (MT only). */ 663 char * number; /* "number" from 27.007 7.17 664 (MT only, may be NULL). */ 665 } RIL_SuppSvcNotification; 666 667 #define RIL_CARD_MAX_APPS 8 668 669 typedef enum { 670 RIL_CARDSTATE_ABSENT = 0, 671 RIL_CARDSTATE_PRESENT = 1, 672 RIL_CARDSTATE_ERROR = 2 673 } RIL_CardState; 674 675 typedef enum { 676 RIL_PERSOSUBSTATE_UNKNOWN = 0, /* initial state */ 677 RIL_PERSOSUBSTATE_IN_PROGRESS = 1, /* in between each lock transition */ 678 RIL_PERSOSUBSTATE_READY = 2, /* when either SIM or RUIM Perso is finished 679 since each app can only have 1 active perso 680 involved */ 681 RIL_PERSOSUBSTATE_SIM_NETWORK = 3, 682 RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET = 4, 683 RIL_PERSOSUBSTATE_SIM_CORPORATE = 5, 684 RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER = 6, 685 RIL_PERSOSUBSTATE_SIM_SIM = 7, 686 RIL_PERSOSUBSTATE_SIM_NETWORK_PUK = 8, /* The corresponding perso lock is blocked */ 687 RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET_PUK = 9, 688 RIL_PERSOSUBSTATE_SIM_CORPORATE_PUK = 10, 689 RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER_PUK = 11, 690 RIL_PERSOSUBSTATE_SIM_SIM_PUK = 12, 691 RIL_PERSOSUBSTATE_RUIM_NETWORK1 = 13, 692 RIL_PERSOSUBSTATE_RUIM_NETWORK2 = 14, 693 RIL_PERSOSUBSTATE_RUIM_HRPD = 15, 694 RIL_PERSOSUBSTATE_RUIM_CORPORATE = 16, 695 RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER = 17, 696 RIL_PERSOSUBSTATE_RUIM_RUIM = 18, 697 RIL_PERSOSUBSTATE_RUIM_NETWORK1_PUK = 19, /* The corresponding perso lock is blocked */ 698 RIL_PERSOSUBSTATE_RUIM_NETWORK2_PUK = 20, 699 RIL_PERSOSUBSTATE_RUIM_HRPD_PUK = 21, 700 RIL_PERSOSUBSTATE_RUIM_CORPORATE_PUK = 22, 701 RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER_PUK = 23, 702 RIL_PERSOSUBSTATE_RUIM_RUIM_PUK = 24 703 } RIL_PersoSubstate; 704 705 typedef enum { 706 RIL_APPSTATE_UNKNOWN = 0, 707 RIL_APPSTATE_DETECTED = 1, 708 RIL_APPSTATE_PIN = 2, /* If PIN1 or UPin is required */ 709 RIL_APPSTATE_PUK = 3, /* If PUK1 or Puk for UPin is required */ 710 RIL_APPSTATE_SUBSCRIPTION_PERSO = 4, /* perso_substate should be look at 711 when app_state is assigned to this value */ 712 RIL_APPSTATE_READY = 5 713 } RIL_AppState; 714 715 typedef enum { 716 RIL_PINSTATE_UNKNOWN = 0, 717 RIL_PINSTATE_ENABLED_NOT_VERIFIED = 1, 718 RIL_PINSTATE_ENABLED_VERIFIED = 2, 719 RIL_PINSTATE_DISABLED = 3, 720 RIL_PINSTATE_ENABLED_BLOCKED = 4, 721 RIL_PINSTATE_ENABLED_PERM_BLOCKED = 5 722 } RIL_PinState; 723 724 typedef enum { 725 RIL_APPTYPE_UNKNOWN = 0, 726 RIL_APPTYPE_SIM = 1, 727 RIL_APPTYPE_USIM = 2, 728 RIL_APPTYPE_RUIM = 3, 729 RIL_APPTYPE_CSIM = 4, 730 RIL_APPTYPE_ISIM = 5 731 } RIL_AppType; 732 733 typedef struct 734 { 735 RIL_AppType app_type; 736 RIL_AppState app_state; 737 RIL_PersoSubstate perso_substate; /* applicable only if app_state == 738 RIL_APPSTATE_SUBSCRIPTION_PERSO */ 739 char *aid_ptr; /* null terminated string, e.g., from 0xA0, 0x00 -> 0x41, 740 0x30, 0x30, 0x30 */ 741 char *app_label_ptr; /* null terminated string */ 742 int pin1_replaced; /* applicable to USIM, CSIM & ISIM */ 743 RIL_PinState pin1; 744 RIL_PinState pin2; 745 } RIL_AppStatus; 746 747 /* Deprecated, use RIL_CardStatus_v6 */ 748 typedef struct 749 { 750 RIL_CardState card_state; 751 RIL_PinState universal_pin_state; /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */ 752 int gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ 753 int cdma_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ 754 int num_applications; /* value <= RIL_CARD_MAX_APPS */ 755 RIL_AppStatus applications[RIL_CARD_MAX_APPS]; 756 } RIL_CardStatus_v5; 757 758 typedef struct 759 { 760 RIL_CardState card_state; 761 RIL_PinState universal_pin_state; /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */ 762 int gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ 763 int cdma_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ 764 int ims_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */ 765 int num_applications; /* value <= RIL_CARD_MAX_APPS */ 766 RIL_AppStatus applications[RIL_CARD_MAX_APPS]; 767 } RIL_CardStatus_v6; 768 769 /** The result of a SIM refresh, returned in data[0] of RIL_UNSOL_SIM_REFRESH 770 * or as part of RIL_SimRefreshResponse_v7 771 */ 772 typedef enum { 773 /* A file on SIM has been updated. data[1] contains the EFID. */ 774 SIM_FILE_UPDATE = 0, 775 /* SIM initialized. All files should be re-read. */ 776 SIM_INIT = 1, 777 /* SIM reset. SIM power required, SIM may be locked and all files should be re-read. */ 778 SIM_RESET = 2 779 } RIL_SimRefreshResult; 780 781 typedef struct { 782 RIL_SimRefreshResult result; 783 int ef_id; /* is the EFID of the updated file if the result is */ 784 /* SIM_FILE_UPDATE or 0 for any other result. */ 785 char * aid; /* is AID(application ID) of the card application */ 786 /* See ETSI 102.221 8.1 and 101.220 4 */ 787 /* For SIM_FILE_UPDATE result it can be set to AID of */ 788 /* application in which updated EF resides or it can be */ 789 /* NULL if EF is outside of an application. */ 790 /* For SIM_INIT result this field is set to AID of */ 791 /* application that caused REFRESH */ 792 /* For SIM_RESET result it is NULL. */ 793 } RIL_SimRefreshResponse_v7; 794 795 /* Deprecated, use RIL_CDMA_CallWaiting_v6 */ 796 typedef struct { 797 char * number; /* Remote party number */ 798 int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */ 799 char * name; /* Remote party name */ 800 RIL_CDMA_SignalInfoRecord signalInfoRecord; 801 } RIL_CDMA_CallWaiting_v5; 802 803 typedef struct { 804 char * number; /* Remote party number */ 805 int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */ 806 char * name; /* Remote party name */ 807 RIL_CDMA_SignalInfoRecord signalInfoRecord; 808 /* Number type/Number plan required to support International Call Waiting */ 809 int number_type; /* 0=Unknown, 1=International, 2=National, 810 3=Network specific, 4=subscriber */ 811 int number_plan; /* 0=Unknown, 1=ISDN, 3=Data, 4=Telex, 8=Nat'l, 9=Private */ 812 } RIL_CDMA_CallWaiting_v6; 813 814 /** 815 * Which types of Cell Broadcast Message (CBM) are to be received by the ME 816 * 817 * uFromServiceID - uToServiceID defines a range of CBM message identifiers 818 * whose value is 0x0000 - 0xFFFF as defined in TS 23.041 9.4.1.2.2 for GMS 819 * and 9.4.4.2.2 for UMTS. All other values can be treated as empty 820 * CBM message ID. 821 * 822 * uFromCodeScheme - uToCodeScheme defines a range of CBM data coding schemes 823 * whose value is 0x00 - 0xFF as defined in TS 23.041 9.4.1.2.3 for GMS 824 * and 9.4.4.2.3 for UMTS. 825 * All other values can be treated as empty CBM data coding scheme. 826 * 827 * selected 0 means message types specified in <fromServiceId, toServiceId> 828 * and <fromCodeScheme, toCodeScheme>are not accepted, while 1 means accepted. 829 * 830 * Used by RIL_REQUEST_GSM_GET_BROADCAST_CONFIG and 831 * RIL_REQUEST_GSM_SET_BROADCAST_CONFIG. 832 */ 833 typedef struct { 834 int fromServiceId; 835 int toServiceId; 836 int fromCodeScheme; 837 int toCodeScheme; 838 unsigned char selected; 839 } RIL_GSM_BroadcastSmsConfigInfo; 840 841 /* No restriction at all including voice/SMS/USSD/SS/AV64 and packet data. */ 842 #define RIL_RESTRICTED_STATE_NONE 0x00 843 /* Block emergency call due to restriction. But allow all normal voice/SMS/USSD/SS/AV64. */ 844 #define RIL_RESTRICTED_STATE_CS_EMERGENCY 0x01 845 /* Block all normal voice/SMS/USSD/SS/AV64 due to restriction. Only Emergency call allowed. */ 846 #define RIL_RESTRICTED_STATE_CS_NORMAL 0x02 847 /* Block all voice/SMS/USSD/SS/AV64 including emergency call due to restriction.*/ 848 #define RIL_RESTRICTED_STATE_CS_ALL 0x04 849 /* Block packet data access due to restriction. */ 850 #define RIL_RESTRICTED_STATE_PS_ALL 0x10 851 852 /* The status for an OTASP/OTAPA session */ 853 typedef enum { 854 CDMA_OTA_PROVISION_STATUS_SPL_UNLOCKED, 855 CDMA_OTA_PROVISION_STATUS_SPC_RETRIES_EXCEEDED, 856 CDMA_OTA_PROVISION_STATUS_A_KEY_EXCHANGED, 857 CDMA_OTA_PROVISION_STATUS_SSD_UPDATED, 858 CDMA_OTA_PROVISION_STATUS_NAM_DOWNLOADED, 859 CDMA_OTA_PROVISION_STATUS_MDN_DOWNLOADED, 860 CDMA_OTA_PROVISION_STATUS_IMSI_DOWNLOADED, 861 CDMA_OTA_PROVISION_STATUS_PRL_DOWNLOADED, 862 CDMA_OTA_PROVISION_STATUS_COMMITTED, 863 CDMA_OTA_PROVISION_STATUS_OTAPA_STARTED, 864 CDMA_OTA_PROVISION_STATUS_OTAPA_STOPPED, 865 CDMA_OTA_PROVISION_STATUS_OTAPA_ABORTED 866 } RIL_CDMA_OTA_ProvisionStatus; 867 868 typedef struct { 869 int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ 870 int bitErrorRate; /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */ 871 } RIL_GW_SignalStrength; 872 873 typedef struct { 874 int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ 875 int bitErrorRate; /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */ 876 } RIL_SignalStrengthWcdma; 877 878 typedef struct { 879 int dbm; /* Valid values are positive integers. This value is the actual RSSI value 880 * multiplied by -1. Example: If the actual RSSI is -75, then this response 881 * value will be 75. 882 */ 883 int ecio; /* Valid values are positive integers. This value is the actual Ec/Io multiplied 884 * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value 885 * will be 125. 886 */ 887 } RIL_CDMA_SignalStrength; 888 889 890 typedef struct { 891 int dbm; /* Valid values are positive integers. This value is the actual RSSI value 892 * multiplied by -1. Example: If the actual RSSI is -75, then this response 893 * value will be 75. 894 */ 895 int ecio; /* Valid values are positive integers. This value is the actual Ec/Io multiplied 896 * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value 897 * will be 125. 898 */ 899 int signalNoiseRatio; /* Valid values are 0-8. 8 is the highest signal to noise ratio. */ 900 } RIL_EVDO_SignalStrength; 901 902 typedef struct { 903 int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ 904 int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1. 905 * Range: 44 to 140 dBm 906 * INT_MAX: 0x7FFFFFFF denotes invalid value. 907 * Reference: 3GPP TS 36.133 9.1.4 */ 908 int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1. 909 * Range: 20 to 3 dB. 910 * INT_MAX: 0x7FFFFFFF denotes invalid value. 911 * Reference: 3GPP TS 36.133 9.1.7 */ 912 int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units. 913 * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB). 914 * INT_MAX : 0x7FFFFFFF denotes invalid value. 915 * Reference: 3GPP TS 36.101 8.1.1 */ 916 int cqi; /* The current Channel Quality Indicator. 917 * Range: 0 to 15. 918 * INT_MAX : 0x7FFFFFFF denotes invalid value. 919 * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */ 920 } RIL_LTE_SignalStrength; 921 922 typedef struct { 923 int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */ 924 int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1. 925 * Range: 44 to 140 dBm 926 * INT_MAX: 0x7FFFFFFF denotes invalid value. 927 * Reference: 3GPP TS 36.133 9.1.4 */ 928 int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1. 929 * Range: 20 to 3 dB. 930 * INT_MAX: 0x7FFFFFFF denotes invalid value. 931 * Reference: 3GPP TS 36.133 9.1.7 */ 932 int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units. 933 * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB). 934 * INT_MAX : 0x7FFFFFFF denotes invalid value. 935 * Reference: 3GPP TS 36.101 8.1.1 */ 936 int cqi; /* The current Channel Quality Indicator. 937 * Range: 0 to 15. 938 * INT_MAX : 0x7FFFFFFF denotes invalid value. 939 * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */ 940 int timingAdvance; /* timing advance in micro seconds for a one way trip from cell to device. 941 * Approximate distance can be calculated using 300m/us * timingAdvance. 942 * Range: 0 to 0x7FFFFFFE 943 * INT_MAX : 0x7FFFFFFF denotes invalid value. 944 * Reference: 3GPP 36.321 section 6.1.3.5 945 * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */ 946 } RIL_LTE_SignalStrength_v8; 947 948 typedef struct { 949 int rscp; /* The Received Signal Code Power in dBm multipled by -1. 950 * Range : 25 to 120 951 * INT_MAX: 0x7FFFFFFF denotes invalid value. 952 * Reference: 3GPP TS 25.123, section 9.1.1.1 */ 953 } RIL_TD_SCDMA_SignalStrength; 954 955 /* Deprecated, use RIL_SignalStrength_v6 */ 956 typedef struct { 957 RIL_GW_SignalStrength GW_SignalStrength; 958 RIL_CDMA_SignalStrength CDMA_SignalStrength; 959 RIL_EVDO_SignalStrength EVDO_SignalStrength; 960 } RIL_SignalStrength_v5; 961 962 typedef struct { 963 RIL_GW_SignalStrength GW_SignalStrength; 964 RIL_CDMA_SignalStrength CDMA_SignalStrength; 965 RIL_EVDO_SignalStrength EVDO_SignalStrength; 966 RIL_LTE_SignalStrength LTE_SignalStrength; 967 } RIL_SignalStrength_v6; 968 969 typedef struct { 970 RIL_GW_SignalStrength GW_SignalStrength; 971 RIL_CDMA_SignalStrength CDMA_SignalStrength; 972 RIL_EVDO_SignalStrength EVDO_SignalStrength; 973 RIL_LTE_SignalStrength_v8 LTE_SignalStrength; 974 } RIL_SignalStrength_v8; 975 976 typedef struct { 977 RIL_GW_SignalStrength GW_SignalStrength; 978 RIL_CDMA_SignalStrength CDMA_SignalStrength; 979 RIL_EVDO_SignalStrength EVDO_SignalStrength; 980 RIL_LTE_SignalStrength_v8 LTE_SignalStrength; 981 RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength; 982 } RIL_SignalStrength_v10; 983 984 /** RIL_CellIdentityGsm */ 985 typedef struct { 986 int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ 987 int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ 988 int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ 989 int cid; /* 16-bit GSM Cell Identity described in TS 27.007, 0..65535, INT_MAX if unknown */ 990 } RIL_CellIdentityGsm; 991 992 /** RIL_CellIdentityWcdma */ 993 typedef struct { 994 int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ 995 int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ 996 int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ 997 int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */ 998 int psc; /* 9-bit UMTS Primary Scrambling Code described in TS 25.331, 0..511, INT_MAX if unknown */ 999 } RIL_CellIdentityWcdma; 1000 1001 /** RIL_CellIdentityCdma */ 1002 typedef struct { 1003 int networkId; /* Network Id 0..65535, INT_MAX if unknown */ 1004 int systemId; /* CDMA System Id 0..32767, INT_MAX if unknown */ 1005 int basestationId; /* Base Station Id 0..65535, INT_MAX if unknown */ 1006 int longitude; /* Longitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0. 1007 * It is represented in units of 0.25 seconds and ranges from -2592000 1008 * to 2592000, both values inclusive (corresponding to a range of -180 1009 * to +180 degrees). INT_MAX if unknown */ 1010 1011 int latitude; /* Latitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0. 1012 * It is represented in units of 0.25 seconds and ranges from -1296000 1013 * to 1296000, both values inclusive (corresponding to a range of -90 1014 * to +90 degrees). INT_MAX if unknown */ 1015 } RIL_CellIdentityCdma; 1016 1017 /** RIL_CellIdentityLte */ 1018 typedef struct { 1019 int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ 1020 int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ 1021 int ci; /* 28-bit Cell Identity described in TS ???, INT_MAX if unknown */ 1022 int pci; /* physical cell id 0..503, INT_MAX if unknown */ 1023 int tac; /* 16-bit tracking area code, INT_MAX if unknown */ 1024 } RIL_CellIdentityLte; 1025 1026 /** RIL_CellIdentityTdscdma */ 1027 typedef struct { 1028 int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ 1029 int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ 1030 int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ 1031 int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */ 1032 int cpid; /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */ 1033 } RIL_CellIdentityTdscdma; 1034 1035 /** RIL_CellInfoGsm */ 1036 typedef struct { 1037 RIL_CellIdentityGsm cellIdentityGsm; 1038 RIL_GW_SignalStrength signalStrengthGsm; 1039 } RIL_CellInfoGsm; 1040 1041 /** RIL_CellInfoWcdma */ 1042 typedef struct { 1043 RIL_CellIdentityWcdma cellIdentityWcdma; 1044 RIL_SignalStrengthWcdma signalStrengthWcdma; 1045 } RIL_CellInfoWcdma; 1046 1047 /** RIL_CellInfoCdma */ 1048 typedef struct { 1049 RIL_CellIdentityCdma cellIdentityCdma; 1050 RIL_CDMA_SignalStrength signalStrengthCdma; 1051 RIL_EVDO_SignalStrength signalStrengthEvdo; 1052 } RIL_CellInfoCdma; 1053 1054 /** RIL_CellInfoLte */ 1055 typedef struct { 1056 RIL_CellIdentityLte cellIdentityLte; 1057 RIL_LTE_SignalStrength_v8 signalStrengthLte; 1058 } RIL_CellInfoLte; 1059 1060 /** RIL_CellInfoTdscdma */ 1061 typedef struct { 1062 RIL_CellIdentityTdscdma cellIdentityTdscdma; 1063 RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma; 1064 } RIL_CellInfoTdscdma; 1065 1066 // Must be the same as CellInfo.TYPE_XXX 1067 typedef enum { 1068 RIL_CELL_INFO_TYPE_GSM = 1, 1069 RIL_CELL_INFO_TYPE_CDMA = 2, 1070 RIL_CELL_INFO_TYPE_LTE = 3, 1071 RIL_CELL_INFO_TYPE_WCDMA = 4, 1072 RIL_CELL_INFO_TYPE_TD_SCDMA = 5 1073 } RIL_CellInfoType; 1074 1075 // Must be the same as CellInfo.TIMESTAMP_TYPE_XXX 1076 typedef enum { 1077 RIL_TIMESTAMP_TYPE_UNKNOWN = 0, 1078 RIL_TIMESTAMP_TYPE_ANTENNA = 1, 1079 RIL_TIMESTAMP_TYPE_MODEM = 2, 1080 RIL_TIMESTAMP_TYPE_OEM_RIL = 3, 1081 RIL_TIMESTAMP_TYPE_JAVA_RIL = 4, 1082 } RIL_TimeStampType; 1083 1084 typedef struct { 1085 RIL_CellInfoType cellInfoType; /* cell type for selecting from union CellInfo */ 1086 int registered; /* !0 if this cell is registered 0 if not registered */ 1087 RIL_TimeStampType timeStampType; /* type of time stamp represented by timeStamp */ 1088 uint64_t timeStamp; /* Time in nanos as returned by ril_nano_time */ 1089 union { 1090 RIL_CellInfoGsm gsm; 1091 RIL_CellInfoCdma cdma; 1092 RIL_CellInfoLte lte; 1093 RIL_CellInfoWcdma wcdma; 1094 RIL_CellInfoTdscdma tdscdma; 1095 } CellInfo; 1096 } RIL_CellInfo; 1097 1098 /* Names of the CDMA info records (C.S0005 section 3.7.5) */ 1099 typedef enum { 1100 RIL_CDMA_DISPLAY_INFO_REC, 1101 RIL_CDMA_CALLED_PARTY_NUMBER_INFO_REC, 1102 RIL_CDMA_CALLING_PARTY_NUMBER_INFO_REC, 1103 RIL_CDMA_CONNECTED_NUMBER_INFO_REC, 1104 RIL_CDMA_SIGNAL_INFO_REC, 1105 RIL_CDMA_REDIRECTING_NUMBER_INFO_REC, 1106 RIL_CDMA_LINE_CONTROL_INFO_REC, 1107 RIL_CDMA_EXTENDED_DISPLAY_INFO_REC, 1108 RIL_CDMA_T53_CLIR_INFO_REC, 1109 RIL_CDMA_T53_RELEASE_INFO_REC, 1110 RIL_CDMA_T53_AUDIO_CONTROL_INFO_REC 1111 } RIL_CDMA_InfoRecName; 1112 1113 /* Display Info Rec as defined in C.S0005 section 3.7.5.1 1114 Extended Display Info Rec as defined in C.S0005 section 3.7.5.16 1115 Note: the Extended Display info rec contains multiple records of the 1116 form: display_tag, display_len, and display_len occurrences of the 1117 chari field if the display_tag is not 10000000 or 10000001. 1118 To save space, the records are stored consecutively in a byte buffer. 1119 The display_tag, display_len and chari fields are all 1 byte. 1120 */ 1121 1122 typedef struct { 1123 char alpha_len; 1124 char alpha_buf[CDMA_ALPHA_INFO_BUFFER_LENGTH]; 1125 } RIL_CDMA_DisplayInfoRecord; 1126 1127 /* Called Party Number Info Rec as defined in C.S0005 section 3.7.5.2 1128 Calling Party Number Info Rec as defined in C.S0005 section 3.7.5.3 1129 Connected Number Info Rec as defined in C.S0005 section 3.7.5.4 1130 */ 1131 1132 typedef struct { 1133 char len; 1134 char buf[CDMA_NUMBER_INFO_BUFFER_LENGTH]; 1135 char number_type; 1136 char number_plan; 1137 char pi; 1138 char si; 1139 } RIL_CDMA_NumberInfoRecord; 1140 1141 /* Redirecting Number Information Record as defined in C.S0005 section 3.7.5.11 */ 1142 typedef enum { 1143 RIL_REDIRECTING_REASON_UNKNOWN = 0, 1144 RIL_REDIRECTING_REASON_CALL_FORWARDING_BUSY = 1, 1145 RIL_REDIRECTING_REASON_CALL_FORWARDING_NO_REPLY = 2, 1146 RIL_REDIRECTING_REASON_CALLED_DTE_OUT_OF_ORDER = 9, 1147 RIL_REDIRECTING_REASON_CALL_FORWARDING_BY_THE_CALLED_DTE = 10, 1148 RIL_REDIRECTING_REASON_CALL_FORWARDING_UNCONDITIONAL = 15, 1149 RIL_REDIRECTING_REASON_RESERVED 1150 } RIL_CDMA_RedirectingReason; 1151 1152 typedef struct { 1153 RIL_CDMA_NumberInfoRecord redirectingNumber; 1154 /* redirectingReason is set to RIL_REDIRECTING_REASON_UNKNOWN if not included */ 1155 RIL_CDMA_RedirectingReason redirectingReason; 1156 } RIL_CDMA_RedirectingNumberInfoRecord; 1157 1158 /* Line Control Information Record as defined in C.S0005 section 3.7.5.15 */ 1159 typedef struct { 1160 char lineCtrlPolarityIncluded; 1161 char lineCtrlToggle; 1162 char lineCtrlReverse; 1163 char lineCtrlPowerDenial; 1164 } RIL_CDMA_LineControlInfoRecord; 1165 1166 /* T53 CLIR Information Record */ 1167 typedef struct { 1168 char cause; 1169 } RIL_CDMA_T53_CLIRInfoRecord; 1170 1171 /* T53 Audio Control Information Record */ 1172 typedef struct { 1173 char upLink; 1174 char downLink; 1175 } RIL_CDMA_T53_AudioControlInfoRecord; 1176 1177 typedef struct { 1178 1179 RIL_CDMA_InfoRecName name; 1180 1181 union { 1182 /* Display and Extended Display Info Rec */ 1183 RIL_CDMA_DisplayInfoRecord display; 1184 1185 /* Called Party Number, Calling Party Number, Connected Number Info Rec */ 1186 RIL_CDMA_NumberInfoRecord number; 1187 1188 /* Signal Info Rec */ 1189 RIL_CDMA_SignalInfoRecord signal; 1190 1191 /* Redirecting Number Info Rec */ 1192 RIL_CDMA_RedirectingNumberInfoRecord redir; 1193 1194 /* Line Control Info Rec */ 1195 RIL_CDMA_LineControlInfoRecord lineCtrl; 1196 1197 /* T53 CLIR Info Rec */ 1198 RIL_CDMA_T53_CLIRInfoRecord clir; 1199 1200 /* T53 Audio Control Info Rec */ 1201 RIL_CDMA_T53_AudioControlInfoRecord audioCtrl; 1202 } rec; 1203 } RIL_CDMA_InformationRecord; 1204 1205 #define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10 1206 1207 typedef struct { 1208 char numberOfInfoRecs; 1209 RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS]; 1210 } RIL_CDMA_InformationRecords; 1211 1212 /* See RIL_REQUEST_NV_READ_ITEM */ 1213 typedef struct { 1214 RIL_NV_Item itemID; 1215 } RIL_NV_ReadItem; 1216 1217 /* See RIL_REQUEST_NV_WRITE_ITEM */ 1218 typedef struct { 1219 RIL_NV_Item itemID; 1220 char * value; 1221 } RIL_NV_WriteItem; 1222 1223 typedef enum { 1224 HANDOVER_STARTED = 0, 1225 HANDOVER_COMPLETED = 1, 1226 HANDOVER_FAILED = 2, 1227 HANDOVER_CANCELED = 3 1228 } RIL_SrvccState; 1229 1230 /* hardware configuration reported to RILJ. */ 1231 typedef enum { 1232 RIL_HARDWARE_CONFIG_MODEM = 0, 1233 RIL_HARDWARE_CONFIG_SIM = 1, 1234 } RIL_HardwareConfig_Type; 1235 1236 typedef enum { 1237 RIL_HARDWARE_CONFIG_STATE_ENABLED = 0, 1238 RIL_HARDWARE_CONFIG_STATE_STANDBY = 1, 1239 RIL_HARDWARE_CONFIG_STATE_DISABLED = 2, 1240 } RIL_HardwareConfig_State; 1241 1242 typedef struct { 1243 int rilModel; 1244 uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */ 1245 int maxVoice; 1246 int maxData; 1247 int maxStandby; 1248 } RIL_HardwareConfig_Modem; 1249 1250 typedef struct { 1251 char modemUuid[MAX_UUID_LENGTH]; 1252 } RIL_HardwareConfig_Sim; 1253 1254 typedef struct { 1255 RIL_HardwareConfig_Type type; 1256 char uuid[MAX_UUID_LENGTH]; 1257 RIL_HardwareConfig_State state; 1258 union { 1259 RIL_HardwareConfig_Modem modem; 1260 RIL_HardwareConfig_Sim sim; 1261 } cfg; 1262 } RIL_HardwareConfig; 1263 1264 typedef enum { 1265 SS_CFU, 1266 SS_CF_BUSY, 1267 SS_CF_NO_REPLY, 1268 SS_CF_NOT_REACHABLE, 1269 SS_CF_ALL, 1270 SS_CF_ALL_CONDITIONAL, 1271 SS_CLIP, 1272 SS_CLIR, 1273 SS_COLP, 1274 SS_COLR, 1275 SS_WAIT, 1276 SS_BAOC, 1277 SS_BAOIC, 1278 SS_BAOIC_EXC_HOME, 1279 SS_BAIC, 1280 SS_BAIC_ROAMING, 1281 SS_ALL_BARRING, 1282 SS_OUTGOING_BARRING, 1283 SS_INCOMING_BARRING 1284 } RIL_SsServiceType; 1285 1286 typedef enum { 1287 SS_ACTIVATION, 1288 SS_DEACTIVATION, 1289 SS_INTERROGATION, 1290 SS_REGISTRATION, 1291 SS_ERASURE 1292 } RIL_SsRequestType; 1293 1294 typedef enum { 1295 SS_ALL_TELE_AND_BEARER_SERVICES, 1296 SS_ALL_TELESEVICES, 1297 SS_TELEPHONY, 1298 SS_ALL_DATA_TELESERVICES, 1299 SS_SMS_SERVICES, 1300 SS_ALL_TELESERVICES_EXCEPT_SMS 1301 } RIL_SsTeleserviceType; 1302 1303 #define SS_INFO_MAX 4 1304 #define NUM_SERVICE_CLASSES 7 1305 1306 typedef struct { 1307 int numValidIndexes; /* This gives the number of valid values in cfInfo. 1308 For example if voice is forwarded to one number and data 1309 is forwarded to a different one then numValidIndexes will be 1310 2 indicating total number of valid values in cfInfo. 1311 Similarly if all the services are forwarded to the same 1312 number then the value of numValidIndexes will be 1. */ 1313 1314 RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data 1315 for SS request to query call 1316 forward status. see 1317 RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */ 1318 } RIL_CfData; 1319 1320 typedef struct { 1321 RIL_SsServiceType serviceType; 1322 RIL_SsRequestType requestType; 1323 RIL_SsTeleserviceType teleserviceType; 1324 int serviceClass; 1325 RIL_Errno result; 1326 1327 union { 1328 int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET 1329 RIL requests. E.g. RIL_REQUSET_GET_CLIR returns 1330 two ints, so first two values of ssInfo[] will be 1331 used for response if serviceType is SS_CLIR and 1332 requestType is SS_INTERROGATION */ 1333 1334 RIL_CfData cfData; 1335 }; 1336 } RIL_StkCcUnsolSsResponse; 1337 1338 /** 1339 * Data connection power state 1340 */ 1341 typedef enum { 1342 RIL_DC_POWER_STATE_LOW = 1, // Low power state 1343 RIL_DC_POWER_STATE_MEDIUM = 2, // Medium power state 1344 RIL_DC_POWER_STATE_HIGH = 3, // High power state 1345 RIL_DC_POWER_STATE_UNKNOWN = INT32_MAX // Unknown state 1346 } RIL_DcPowerStates; 1347 1348 /** 1349 * Data connection real time info 1350 */ 1351 typedef struct { 1352 uint64_t time; // Time in nanos as returned by ril_nano_time 1353 RIL_DcPowerStates powerState; // Current power state 1354 } RIL_DcRtInfo; 1355 1356 /** 1357 * Data profile to modem 1358 */ 1359 typedef struct { 1360 /* id of the data profile */ 1361 int profileId; 1362 /* the APN to connect to */ 1363 char* apn; 1364 /** one of the PDP_type values in TS 27.007 section 10.1.1. 1365 * For example, "IP", "IPV6", "IPV4V6", or "PPP". 1366 */ 1367 char* protocol; 1368 /** authentication protocol used for this PDP context 1369 * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3) 1370 */ 1371 int authType; 1372 /* the username for APN, or NULL */ 1373 char* user; 1374 /* the password for APN, or NULL */ 1375 char* password; 1376 /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */ 1377 int type; 1378 /* the period in seconds to limit the maximum connections */ 1379 int maxConnsTime; 1380 /* the maximum connections during maxConnsTime */ 1381 int maxConns; 1382 /** the required wait time in seconds after a successful UE initiated 1383 * disconnect of a given PDN connection before the device can send 1384 * a new PDN connection request for that given PDN 1385 */ 1386 int waitTime; 1387 /* true to enable the profile, 0 to disable, 1 to enable */ 1388 int enabled; 1389 } RIL_DataProfileInfo; 1390 1391 /** 1392 * RIL_REQUEST_GET_SIM_STATUS 1393 * 1394 * Requests status of the SIM interface and the SIM card 1395 * 1396 * "data" is NULL 1397 * 1398 * "response" is const RIL_CardStatus_v6 * 1399 * 1400 * Valid errors: 1401 * Must never fail 1402 */ 1403 #define RIL_REQUEST_GET_SIM_STATUS 1 1404 1405 /** 1406 * RIL_REQUEST_ENTER_SIM_PIN 1407 * 1408 * Supplies SIM PIN. Only called if RIL_CardStatus has RIL_APPSTATE_PIN state 1409 * 1410 * "data" is const char ** 1411 * ((const char **)data)[0] is PIN value 1412 * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1413 * 1414 * "response" is int * 1415 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1416 * 1417 * Valid errors: 1418 * 1419 * SUCCESS 1420 * RADIO_NOT_AVAILABLE (radio resetting) 1421 * GENERIC_FAILURE 1422 * PASSWORD_INCORRECT 1423 */ 1424 1425 #define RIL_REQUEST_ENTER_SIM_PIN 2 1426 1427 /** 1428 * RIL_REQUEST_ENTER_SIM_PUK 1429 * 1430 * Supplies SIM PUK and new PIN. 1431 * 1432 * "data" is const char ** 1433 * ((const char **)data)[0] is PUK value 1434 * ((const char **)data)[1] is new PIN value 1435 * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1436 * 1437 * "response" is int * 1438 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1439 * 1440 * Valid errors: 1441 * 1442 * SUCCESS 1443 * RADIO_NOT_AVAILABLE (radio resetting) 1444 * GENERIC_FAILURE 1445 * PASSWORD_INCORRECT 1446 * (PUK is invalid) 1447 */ 1448 1449 #define RIL_REQUEST_ENTER_SIM_PUK 3 1450 1451 /** 1452 * RIL_REQUEST_ENTER_SIM_PIN2 1453 * 1454 * Supplies SIM PIN2. Only called following operation where SIM_PIN2 was 1455 * returned as a a failure from a previous operation. 1456 * 1457 * "data" is const char ** 1458 * ((const char **)data)[0] is PIN2 value 1459 * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1460 * 1461 * "response" is int * 1462 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1463 * 1464 * Valid errors: 1465 * 1466 * SUCCESS 1467 * RADIO_NOT_AVAILABLE (radio resetting) 1468 * GENERIC_FAILURE 1469 * PASSWORD_INCORRECT 1470 */ 1471 1472 #define RIL_REQUEST_ENTER_SIM_PIN2 4 1473 1474 /** 1475 * RIL_REQUEST_ENTER_SIM_PUK2 1476 * 1477 * Supplies SIM PUK2 and new PIN2. 1478 * 1479 * "data" is const char ** 1480 * ((const char **)data)[0] is PUK2 value 1481 * ((const char **)data)[1] is new PIN2 value 1482 * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1483 * 1484 * "response" is int * 1485 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1486 * 1487 * Valid errors: 1488 * 1489 * SUCCESS 1490 * RADIO_NOT_AVAILABLE (radio resetting) 1491 * GENERIC_FAILURE 1492 * PASSWORD_INCORRECT 1493 * (PUK2 is invalid) 1494 */ 1495 1496 #define RIL_REQUEST_ENTER_SIM_PUK2 5 1497 1498 /** 1499 * RIL_REQUEST_CHANGE_SIM_PIN 1500 * 1501 * Supplies old SIM PIN and new PIN. 1502 * 1503 * "data" is const char ** 1504 * ((const char **)data)[0] is old PIN value 1505 * ((const char **)data)[1] is new PIN value 1506 * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1507 * 1508 * "response" is int * 1509 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1510 * 1511 * Valid errors: 1512 * 1513 * SUCCESS 1514 * RADIO_NOT_AVAILABLE (radio resetting) 1515 * GENERIC_FAILURE 1516 * PASSWORD_INCORRECT 1517 * (old PIN is invalid) 1518 * 1519 */ 1520 1521 #define RIL_REQUEST_CHANGE_SIM_PIN 6 1522 1523 1524 /** 1525 * RIL_REQUEST_CHANGE_SIM_PIN2 1526 * 1527 * Supplies old SIM PIN2 and new PIN2. 1528 * 1529 * "data" is const char ** 1530 * ((const char **)data)[0] is old PIN2 value 1531 * ((const char **)data)[1] is new PIN2 value 1532 * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1533 * 1534 * "response" is int * 1535 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1536 * 1537 * Valid errors: 1538 * 1539 * SUCCESS 1540 * RADIO_NOT_AVAILABLE (radio resetting) 1541 * GENERIC_FAILURE 1542 * PASSWORD_INCORRECT 1543 * (old PIN2 is invalid) 1544 * 1545 */ 1546 1547 #define RIL_REQUEST_CHANGE_SIM_PIN2 7 1548 1549 /** 1550 * RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION 1551 * 1552 * Requests that network personlization be deactivated 1553 * 1554 * "data" is const char ** 1555 * ((const char **)(data))[0]] is network depersonlization code 1556 * 1557 * "response" is int * 1558 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 1559 * 1560 * Valid errors: 1561 * 1562 * SUCCESS 1563 * RADIO_NOT_AVAILABLE (radio resetting) 1564 * GENERIC_FAILURE 1565 * PASSWORD_INCORRECT 1566 * (code is invalid) 1567 */ 1568 1569 #define RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION 8 1570 1571 /** 1572 * RIL_REQUEST_GET_CURRENT_CALLS 1573 * 1574 * Requests current call list 1575 * 1576 * "data" is NULL 1577 * 1578 * "response" must be a "const RIL_Call **" 1579 * 1580 * Valid errors: 1581 * 1582 * SUCCESS 1583 * RADIO_NOT_AVAILABLE (radio resetting) 1584 * GENERIC_FAILURE 1585 * (request will be made again in a few hundred msec) 1586 */ 1587 1588 #define RIL_REQUEST_GET_CURRENT_CALLS 9 1589 1590 1591 /** 1592 * RIL_REQUEST_DIAL 1593 * 1594 * Initiate voice call 1595 * 1596 * "data" is const RIL_Dial * 1597 * "response" is NULL 1598 * 1599 * This method is never used for supplementary service codes 1600 * 1601 * Valid errors: 1602 * SUCCESS 1603 * RADIO_NOT_AVAILABLE (radio resetting) 1604 * DIAL_MODIFIED_TO_USSD 1605 * DIAL_MODIFIED_TO_SS 1606 * DIAL_MODIFIED_TO_DIAL 1607 * GENERIC_FAILURE 1608 */ 1609 #define RIL_REQUEST_DIAL 10 1610 1611 /** 1612 * RIL_REQUEST_GET_IMSI 1613 * 1614 * Get the SIM IMSI 1615 * 1616 * Only valid when radio state is "RADIO_STATE_ON" 1617 * 1618 * "data" is const char ** 1619 * ((const char **)data)[0] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 1620 * "response" is a const char * containing the IMSI 1621 * 1622 * Valid errors: 1623 * SUCCESS 1624 * RADIO_NOT_AVAILABLE (radio resetting) 1625 * GENERIC_FAILURE 1626 */ 1627 1628 #define RIL_REQUEST_GET_IMSI 11 1629 1630 /** 1631 * RIL_REQUEST_HANGUP 1632 * 1633 * Hang up a specific line (like AT+CHLD=1x) 1634 * 1635 * After this HANGUP request returns, RIL should show the connection is NOT 1636 * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query. 1637 * 1638 * "data" is an int * 1639 * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) 1640 * 1641 * "response" is NULL 1642 * 1643 * Valid errors: 1644 * SUCCESS 1645 * RADIO_NOT_AVAILABLE (radio resetting) 1646 * GENERIC_FAILURE 1647 */ 1648 1649 #define RIL_REQUEST_HANGUP 12 1650 1651 /** 1652 * RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND 1653 * 1654 * Hang up waiting or held (like AT+CHLD=0) 1655 * 1656 * After this HANGUP request returns, RIL should show the connection is NOT 1657 * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query. 1658 * 1659 * "data" is NULL 1660 * "response" is NULL 1661 * 1662 * Valid errors: 1663 * SUCCESS 1664 * RADIO_NOT_AVAILABLE (radio resetting) 1665 * GENERIC_FAILURE 1666 */ 1667 1668 #define RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND 13 1669 1670 /** 1671 * RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND 1672 * 1673 * Hang up waiting or held (like AT+CHLD=1) 1674 * 1675 * After this HANGUP request returns, RIL should show the connection is NOT 1676 * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query. 1677 * 1678 * "data" is NULL 1679 * "response" is NULL 1680 * 1681 * Valid errors: 1682 * SUCCESS 1683 * RADIO_NOT_AVAILABLE (radio resetting) 1684 * GENERIC_FAILURE 1685 */ 1686 1687 #define RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND 14 1688 1689 /** 1690 * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE 1691 * 1692 * Switch waiting or holding call and active call (like AT+CHLD=2) 1693 * 1694 * State transitions should be is follows: 1695 * 1696 * If call 1 is waiting and call 2 is active, then if this re 1697 * 1698 * BEFORE AFTER 1699 * Call 1 Call 2 Call 1 Call 2 1700 * ACTIVE HOLDING HOLDING ACTIVE 1701 * ACTIVE WAITING HOLDING ACTIVE 1702 * HOLDING WAITING HOLDING ACTIVE 1703 * ACTIVE IDLE HOLDING IDLE 1704 * IDLE IDLE IDLE IDLE 1705 * 1706 * "data" is NULL 1707 * "response" is NULL 1708 * 1709 * Valid errors: 1710 * SUCCESS 1711 * RADIO_NOT_AVAILABLE (radio resetting) 1712 * GENERIC_FAILURE 1713 */ 1714 1715 #define RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE 15 1716 #define RIL_REQUEST_SWITCH_HOLDING_AND_ACTIVE 15 1717 1718 /** 1719 * RIL_REQUEST_CONFERENCE 1720 * 1721 * Conference holding and active (like AT+CHLD=3) 1722 1723 * "data" is NULL 1724 * "response" is NULL 1725 * 1726 * Valid errors: 1727 * SUCCESS 1728 * RADIO_NOT_AVAILABLE (radio resetting) 1729 * GENERIC_FAILURE 1730 */ 1731 #define RIL_REQUEST_CONFERENCE 16 1732 1733 /** 1734 * RIL_REQUEST_UDUB 1735 * 1736 * Send UDUB (user determined used busy) to ringing or 1737 * waiting call answer)(RIL_BasicRequest r); 1738 * 1739 * "data" is NULL 1740 * "response" is NULL 1741 * 1742 * Valid errors: 1743 * SUCCESS 1744 * RADIO_NOT_AVAILABLE (radio resetting) 1745 * GENERIC_FAILURE 1746 */ 1747 #define RIL_REQUEST_UDUB 17 1748 1749 /** 1750 * RIL_REQUEST_LAST_CALL_FAIL_CAUSE 1751 * 1752 * Requests the failure cause code for the most recently terminated call 1753 * 1754 * "data" is NULL 1755 * "response" is a "int *" 1756 * ((int *)response)[0] is RIL_LastCallFailCause. GSM failure reasons are 1757 * mapped to cause codes defined in TS 24.008 Annex H where possible. CDMA 1758 * failure reasons are derived from the possible call failure scenarios 1759 * described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard. 1760 * 1761 * The implementation should return CALL_FAIL_ERROR_UNSPECIFIED for blocked 1762 * MO calls by restricted state (See RIL_UNSOL_RESTRICTED_STATE_CHANGED) 1763 * 1764 * If the implementation does not have access to the exact cause codes, 1765 * then it should return one of the values listed in RIL_LastCallFailCause, 1766 * as the UI layer needs to distinguish these cases for tone generation or 1767 * error notification. 1768 * 1769 * Valid errors: 1770 * SUCCESS 1771 * RADIO_NOT_AVAILABLE 1772 * GENERIC_FAILURE 1773 * 1774 * See also: RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE 1775 */ 1776 #define RIL_REQUEST_LAST_CALL_FAIL_CAUSE 18 1777 1778 /** 1779 * RIL_REQUEST_SIGNAL_STRENGTH 1780 * 1781 * Requests current signal strength and associated information 1782 * 1783 * Must succeed if radio is on. 1784 * 1785 * "data" is NULL 1786 * 1787 * "response" is a const RIL_SignalStrength * 1788 * 1789 * Valid errors: 1790 * SUCCESS 1791 * RADIO_NOT_AVAILABLE 1792 */ 1793 #define RIL_REQUEST_SIGNAL_STRENGTH 19 1794 1795 /** 1796 * RIL_REQUEST_VOICE_REGISTRATION_STATE 1797 * 1798 * Request current registration state 1799 * 1800 * "data" is NULL 1801 * "response" is a "char **" 1802 * ((const char **)response)[0] is registration state 0-6, 1803 * 0 - Not registered, MT is not currently searching 1804 * a new operator to register 1805 * 1 - Registered, home network 1806 * 2 - Not registered, but MT is currently searching 1807 * a new operator to register 1808 * 3 - Registration denied 1809 * 4 - Unknown 1810 * 5 - Registered, roaming 1811 * 10 - Same as 0, but indicates that emergency calls 1812 * are enabled. 1813 * 12 - Same as 2, but indicates that emergency calls 1814 * are enabled. 1815 * 13 - Same as 3, but indicates that emergency calls 1816 * are enabled. 1817 * 14 - Same as 4, but indicates that emergency calls 1818 * are enabled. 1819 * 1820 * ((const char **)response)[1] is LAC if registered on a GSM/WCDMA system or 1821 * NULL if not.Valid LAC are 0x0000 - 0xffff 1822 * ((const char **)response)[2] is CID if registered on a * GSM/WCDMA or 1823 * NULL if not. 1824 * Valid CID are 0x00000000 - 0xffffffff 1825 * In GSM, CID is Cell ID (see TS 27.007) 1826 * in 16 bits 1827 * In UMTS, CID is UMTS Cell Identity 1828 * (see TS 25.331) in 28 bits 1829 * ((const char **)response)[3] indicates the available voice radio technology, 1830 * valid values as defined by RIL_RadioTechnology. 1831 * ((const char **)response)[4] is Base Station ID if registered on a CDMA 1832 * system or NULL if not. Base Station ID in 1833 * decimal format 1834 * ((const char **)response)[5] is Base Station latitude if registered on a 1835 * CDMA system or NULL if not. Base Station 1836 * latitude is a decimal number as specified in 1837 * 3GPP2 C.S0005-A v6.0. It is represented in 1838 * units of 0.25 seconds and ranges from -1296000 1839 * to 1296000, both values inclusive (corresponding 1840 * to a range of -90 to +90 degrees). 1841 * ((const char **)response)[6] is Base Station longitude if registered on a 1842 * CDMA system or NULL if not. Base Station 1843 * longitude is a decimal number as specified in 1844 * 3GPP2 C.S0005-A v6.0. It is represented in 1845 * units of 0.25 seconds and ranges from -2592000 1846 * to 2592000, both values inclusive (corresponding 1847 * to a range of -180 to +180 degrees). 1848 * ((const char **)response)[7] is concurrent services support indicator if 1849 * registered on a CDMA system 0-1. 1850 * 0 - Concurrent services not supported, 1851 * 1 - Concurrent services supported 1852 * ((const char **)response)[8] is System ID if registered on a CDMA system or 1853 * NULL if not. Valid System ID are 0 - 32767 1854 * ((const char **)response)[9] is Network ID if registered on a CDMA system or 1855 * NULL if not. Valid System ID are 0 - 65535 1856 * ((const char **)response)[10] is the TSB-58 Roaming Indicator if registered 1857 * on a CDMA or EVDO system or NULL if not. Valid values 1858 * are 0-255. 1859 * ((const char **)response)[11] indicates whether the current system is in the 1860 * PRL if registered on a CDMA or EVDO system or NULL if 1861 * not. 0=not in the PRL, 1=in the PRL 1862 * ((const char **)response)[12] is the default Roaming Indicator from the PRL, 1863 * if registered on a CDMA or EVDO system or NULL if not. 1864 * Valid values are 0-255. 1865 * ((const char **)response)[13] if registration state is 3 (Registration 1866 * denied) this is an enumerated reason why 1867 * registration was denied. See 3GPP TS 24.008, 1868 * 10.5.3.6 and Annex G. 1869 * 0 - General 1870 * 1 - Authentication Failure 1871 * 2 - IMSI unknown in HLR 1872 * 3 - Illegal MS 1873 * 4 - Illegal ME 1874 * 5 - PLMN not allowed 1875 * 6 - Location area not allowed 1876 * 7 - Roaming not allowed 1877 * 8 - No Suitable Cells in this Location Area 1878 * 9 - Network failure 1879 * 10 - Persistent location update reject 1880 * 11 - PLMN not allowed 1881 * 12 - Location area not allowed 1882 * 13 - Roaming not allowed in this Location Area 1883 * 15 - No Suitable Cells in this Location Area 1884 * 17 - Network Failure 1885 * 20 - MAC Failure 1886 * 21 - Sync Failure 1887 * 22 - Congestion 1888 * 23 - GSM Authentication unacceptable 1889 * 25 - Not Authorized for this CSG 1890 * 32 - Service option not supported 1891 * 33 - Requested service option not subscribed 1892 * 34 - Service option temporarily out of order 1893 * 38 - Call cannot be identified 1894 * 48-63 - Retry upon entry into a new cell 1895 * 95 - Semantically incorrect message 1896 * 96 - Invalid mandatory information 1897 * 97 - Message type non-existent or not implemented 1898 * 98 - Message not compatible with protocol state 1899 * 99 - Information element non-existent or not implemented 1900 * 100 - Conditional IE error 1901 * 101 - Message not compatible with protocol state 1902 * 111 - Protocol error, unspecified 1903 * ((const char **)response)[14] is the Primary Scrambling Code of the current 1904 * cell as described in TS 25.331, in hexadecimal 1905 * format, or NULL if unknown or not registered 1906 * to a UMTS network. 1907 * 1908 * Please note that registration state 4 ("unknown") is treated 1909 * as "out of service" in the Android telephony system 1910 * 1911 * Registration state 3 can be returned if Location Update Reject 1912 * (with cause 17 - Network Failure) is received repeatedly from the network, 1913 * to facilitate "managed roaming" 1914 * 1915 * Valid errors: 1916 * SUCCESS 1917 * RADIO_NOT_AVAILABLE 1918 * GENERIC_FAILURE 1919 */ 1920 #define RIL_REQUEST_VOICE_REGISTRATION_STATE 20 1921 1922 /** 1923 * RIL_REQUEST_DATA_REGISTRATION_STATE 1924 * 1925 * Request current DATA registration state 1926 * 1927 * "data" is NULL 1928 * "response" is a "char **" 1929 * ((const char **)response)[0] is registration state 0-5 from TS 27.007 10.1.20 AT+CGREG 1930 * ((const char **)response)[1] is LAC if registered or NULL if not 1931 * ((const char **)response)[2] is CID if registered or NULL if not 1932 * ((const char **)response)[3] indicates the available data radio technology, 1933 * valid values as defined by RIL_RadioTechnology. 1934 * ((const char **)response)[4] if registration state is 3 (Registration 1935 * denied) this is an enumerated reason why 1936 * registration was denied. See 3GPP TS 24.008, 1937 * Annex G.6 "Additonal cause codes for GMM". 1938 * 7 == GPRS services not allowed 1939 * 8 == GPRS services and non-GPRS services not allowed 1940 * 9 == MS identity cannot be derived by the network 1941 * 10 == Implicitly detached 1942 * 14 == GPRS services not allowed in this PLMN 1943 * 16 == MSC temporarily not reachable 1944 * 40 == No PDP context activated 1945 * ((const char **)response)[5] The maximum number of simultaneous Data Calls that can be 1946 * established using RIL_REQUEST_SETUP_DATA_CALL. 1947 * 1948 * The values at offsets 6..10 are optional LTE location information in decimal. 1949 * If a value is unknown that value may be NULL. If all values are NULL, 1950 * none need to be present. 1951 * ((const char **)response)[6] is TAC, a 16-bit Tracking Area Code. 1952 * ((const char **)response)[7] is CID, a 0-503 Physical Cell Identifier. 1953 * ((const char **)response)[8] is ECI, a 28-bit E-UTRAN Cell Identifier. 1954 * ((const char **)response)[9] is CSGID, a 27-bit Closed Subscriber Group Identity. 1955 * ((const char **)response)[10] is TADV, a 6-bit timing advance value. 1956 * 1957 * LAC and CID are in hexadecimal format. 1958 * valid LAC are 0x0000 - 0xffff 1959 * valid CID are 0x00000000 - 0x0fffffff 1960 * 1961 * Please note that registration state 4 ("unknown") is treated 1962 * as "out of service" in the Android telephony system 1963 * 1964 * Valid errors: 1965 * SUCCESS 1966 * RADIO_NOT_AVAILABLE 1967 * GENERIC_FAILURE 1968 */ 1969 #define RIL_REQUEST_DATA_REGISTRATION_STATE 21 1970 1971 /** 1972 * RIL_REQUEST_OPERATOR 1973 * 1974 * Request current operator ONS or EONS 1975 * 1976 * "data" is NULL 1977 * "response" is a "const char **" 1978 * ((const char **)response)[0] is long alpha ONS or EONS 1979 * or NULL if unregistered 1980 * 1981 * ((const char **)response)[1] is short alpha ONS or EONS 1982 * or NULL if unregistered 1983 * ((const char **)response)[2] is 5 or 6 digit numeric code (MCC + MNC) 1984 * or NULL if unregistered 1985 * 1986 * Valid errors: 1987 * SUCCESS 1988 * RADIO_NOT_AVAILABLE 1989 * GENERIC_FAILURE 1990 */ 1991 #define RIL_REQUEST_OPERATOR 22 1992 1993 /** 1994 * RIL_REQUEST_RADIO_POWER 1995 * 1996 * Toggle radio on and off (for "airplane" mode) 1997 * If the radio is is turned off/on the radio modem subsystem 1998 * is expected return to an initialized state. For instance, 1999 * any voice and data calls will be terminated and all associated 2000 * lists emptied. 2001 * 2002 * "data" is int * 2003 * ((int *)data)[0] is > 0 for "Radio On" 2004 * ((int *)data)[0] is == 0 for "Radio Off" 2005 * 2006 * "response" is NULL 2007 * 2008 * Turn radio on if "on" > 0 2009 * Turn radio off if "on" == 0 2010 * 2011 * Valid errors: 2012 * SUCCESS 2013 * RADIO_NOT_AVAILABLE 2014 * GENERIC_FAILURE 2015 */ 2016 #define RIL_REQUEST_RADIO_POWER 23 2017 2018 /** 2019 * RIL_REQUEST_DTMF 2020 * 2021 * Send a DTMF tone 2022 * 2023 * If the implementation is currently playing a tone requested via 2024 * RIL_REQUEST_DTMF_START, that tone should be cancelled and the new tone 2025 * should be played instead 2026 * 2027 * "data" is a char * containing a single character with one of 12 values: 0-9,*,# 2028 * "response" is NULL 2029 * 2030 * FIXME should this block/mute microphone? 2031 * How does this interact with local DTMF feedback? 2032 * 2033 * Valid errors: 2034 * SUCCESS 2035 * RADIO_NOT_AVAILABLE 2036 * GENERIC_FAILURE 2037 * 2038 * See also: RIL_REQUEST_DTMF_STOP, RIL_REQUEST_DTMF_START 2039 * 2040 */ 2041 #define RIL_REQUEST_DTMF 24 2042 2043 /** 2044 * RIL_REQUEST_SEND_SMS 2045 * 2046 * Send an SMS message 2047 * 2048 * "data" is const char ** 2049 * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed 2050 * by a length byte (as expected by TS 27.005) or NULL for default SMSC 2051 * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string 2052 * less the SMSC address 2053 * TP-Layer-Length is be "strlen(((const char **)data)[1])/2" 2054 * 2055 * "response" is a const RIL_SMS_Response * 2056 * 2057 * Based on the return error, caller decides to resend if sending sms 2058 * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) 2059 * and GENERIC_FAILURE means no retry (i.e. error cause is 500) 2060 * 2061 * Valid errors: 2062 * SUCCESS 2063 * RADIO_NOT_AVAILABLE 2064 * SMS_SEND_FAIL_RETRY 2065 * FDN_CHECK_FAILURE 2066 * GENERIC_FAILURE 2067 * 2068 * FIXME how do we specify TP-Message-Reference if we need to resend? 2069 */ 2070 #define RIL_REQUEST_SEND_SMS 25 2071 2072 2073 /** 2074 * RIL_REQUEST_SEND_SMS_EXPECT_MORE 2075 * 2076 * Send an SMS message. Identical to RIL_REQUEST_SEND_SMS, 2077 * except that more messages are expected to be sent soon. If possible, 2078 * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command) 2079 * 2080 * "data" is const char ** 2081 * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed 2082 * by a length byte (as expected by TS 27.005) or NULL for default SMSC 2083 * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string 2084 * less the SMSC address 2085 * TP-Layer-Length is be "strlen(((const char **)data)[1])/2" 2086 * 2087 * "response" is a const RIL_SMS_Response * 2088 * 2089 * Based on the return error, caller decides to resend if sending sms 2090 * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332) 2091 * and GENERIC_FAILURE means no retry (i.e. error cause is 500) 2092 * 2093 * Valid errors: 2094 * SUCCESS 2095 * RADIO_NOT_AVAILABLE 2096 * SMS_SEND_FAIL_RETRY 2097 * GENERIC_FAILURE 2098 * 2099 */ 2100 #define RIL_REQUEST_SEND_SMS_EXPECT_MORE 26 2101 2102 2103 /** 2104 * RIL_REQUEST_SETUP_DATA_CALL 2105 * 2106 * Setup a packet data connection. If RIL_Data_Call_Response_v6.status 2107 * return success it is added to the list of data calls and a 2108 * RIL_UNSOL_DATA_CALL_LIST_CHANGED is sent. The call remains in the 2109 * list until RIL_REQUEST_DEACTIVATE_DATA_CALL is issued or the 2110 * radio is powered off/on. This list is returned by RIL_REQUEST_DATA_CALL_LIST 2111 * and RIL_UNSOL_DATA_CALL_LIST_CHANGED. 2112 * 2113 * The RIL is expected to: 2114 * - Create one data call context. 2115 * - Create and configure a dedicated interface for the context 2116 * - The interface must be point to point. 2117 * - The interface is configured with one or more addresses and 2118 * is capable of sending and receiving packets. The prefix length 2119 * of the addresses must be /32 for IPv4 and /128 for IPv6. 2120 * - Must NOT change the linux routing table. 2121 * - Support up to RIL_REQUEST_DATA_REGISTRATION_STATE response[5] 2122 * number of simultaneous data call contexts. 2123 * 2124 * "data" is a const char ** 2125 * ((const char **)data)[0] Radio technology to use: 0-CDMA, 1-GSM/UMTS, 2... 2126 * for values above 2 this is RIL_RadioTechnology + 2. 2127 * ((const char **)data)[1] is a RIL_DataProfile (support is optional) 2128 * ((const char **)data)[2] is the APN to connect to if radio technology is GSM/UMTS. This APN will 2129 * override the one in the profile. NULL indicates no APN overrride. 2130 * ((const char **)data)[3] is the username for APN, or NULL 2131 * ((const char **)data)[4] is the password for APN, or NULL 2132 * ((const char **)data)[5] is the PAP / CHAP auth type. Values: 2133 * 0 => PAP and CHAP is never performed. 2134 * 1 => PAP may be performed; CHAP is never performed. 2135 * 2 => CHAP may be performed; PAP is never performed. 2136 * 3 => PAP / CHAP may be performed - baseband dependent. 2137 * ((const char **)data)[6] is the connection type to request must be one of the 2138 * PDP_type values in TS 27.007 section 10.1.1. 2139 * For example, "IP", "IPV6", "IPV4V6", or "PPP". 2140 * ((const char **)data)[7] Optional connection property parameters, format to be defined. 2141 * 2142 * "response" is a RIL_Data_Call_Response_v11 2143 * 2144 * FIXME may need way to configure QoS settings 2145 * 2146 * Valid errors: 2147 * SUCCESS should be returned on both success and failure of setup with 2148 * the RIL_Data_Call_Response_v6.status containing the actual status. 2149 * For all other errors the RIL_Data_Call_Resonse_v6 is ignored. 2150 * 2151 * Other errors could include: 2152 * RADIO_NOT_AVAILABLE, GENERIC_FAILURE, OP_NOT_ALLOWED_BEFORE_REG_TO_NW, 2153 * OP_NOT_ALLOWED_DURING_VOICE_CALL and REQUEST_NOT_SUPPORTED. 2154 * 2155 * See also: RIL_REQUEST_DEACTIVATE_DATA_CALL 2156 */ 2157 #define RIL_REQUEST_SETUP_DATA_CALL 27 2158 2159 2160 /** 2161 * RIL_REQUEST_SIM_IO 2162 * 2163 * Request SIM I/O operation. 2164 * This is similar to the TS 27.007 "restricted SIM" operation 2165 * where it assumes all of the EF selection will be done by the 2166 * callee. 2167 * 2168 * "data" is a const RIL_SIM_IO_v6 * 2169 * Please note that RIL_SIM_IO has a "PIN2" field which may be NULL, 2170 * or may specify a PIN2 for operations that require a PIN2 (eg 2171 * updating FDN records) 2172 * 2173 * "response" is a const RIL_SIM_IO_Response * 2174 * 2175 * Arguments and responses that are unused for certain 2176 * values of "command" should be ignored or set to NULL 2177 * 2178 * Valid errors: 2179 * SUCCESS 2180 * RADIO_NOT_AVAILABLE 2181 * GENERIC_FAILURE 2182 * SIM_PIN2 2183 * SIM_PUK2 2184 */ 2185 #define RIL_REQUEST_SIM_IO 28 2186 2187 /** 2188 * RIL_REQUEST_SEND_USSD 2189 * 2190 * Send a USSD message 2191 * 2192 * If a USSD session already exists, the message should be sent in the 2193 * context of that session. Otherwise, a new session should be created. 2194 * 2195 * The network reply should be reported via RIL_UNSOL_ON_USSD 2196 * 2197 * Only one USSD session may exist at a time, and the session is assumed 2198 * to exist until: 2199 * a) The android system invokes RIL_REQUEST_CANCEL_USSD 2200 * b) The implementation sends a RIL_UNSOL_ON_USSD with a type code 2201 * of "0" (USSD-Notify/no further action) or "2" (session terminated) 2202 * 2203 * "data" is a const char * containing the USSD request in UTF-8 format 2204 * "response" is NULL 2205 * 2206 * Valid errors: 2207 * SUCCESS 2208 * RADIO_NOT_AVAILABLE 2209 * FDN_CHECK_FAILURE 2210 * USSD_MODIFIED_TO_DIAL 2211 * USSD_MODIFIED_TO_SS 2212 * USSD_MODIFIED_TO_USSD 2213 * GENERIC_FAILURE 2214 * 2215 * See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD 2216 */ 2217 2218 #define RIL_REQUEST_SEND_USSD 29 2219 2220 /** 2221 * RIL_REQUEST_CANCEL_USSD 2222 * 2223 * Cancel the current USSD session if one exists 2224 * 2225 * "data" is null 2226 * "response" is NULL 2227 * 2228 * Valid errors: 2229 * SUCCESS 2230 * RADIO_NOT_AVAILABLE 2231 * GENERIC_FAILURE 2232 */ 2233 2234 #define RIL_REQUEST_CANCEL_USSD 30 2235 2236 /** 2237 * RIL_REQUEST_GET_CLIR 2238 * 2239 * Gets current CLIR status 2240 * "data" is NULL 2241 * "response" is int * 2242 * ((int *)data)[0] is "n" parameter from TS 27.007 7.7 2243 * ((int *)data)[1] is "m" parameter from TS 27.007 7.7 2244 * 2245 * Valid errors: 2246 * SUCCESS 2247 * RADIO_NOT_AVAILABLE 2248 * SS_MODIFIED_TO_DIAL 2249 * SS_MODIFIED_TO_USSD 2250 * SS_MODIFIED_TO_SS 2251 * GENERIC_FAILURE 2252 */ 2253 #define RIL_REQUEST_GET_CLIR 31 2254 2255 /** 2256 * RIL_REQUEST_SET_CLIR 2257 * 2258 * "data" is int * 2259 * ((int *)data)[0] is "n" parameter from TS 27.007 7.7 2260 * 2261 * "response" is NULL 2262 * 2263 * Valid errors: 2264 * SUCCESS 2265 * RADIO_NOT_AVAILABLE 2266 * SS_MODIFIED_TO_DIAL 2267 * SS_MODIFIED_TO_USSD 2268 * SS_MODIFIED_TO_SS 2269 * GENERIC_FAILURE 2270 */ 2271 #define RIL_REQUEST_SET_CLIR 32 2272 2273 /** 2274 * RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 2275 * 2276 * "data" is const RIL_CallForwardInfo * 2277 * 2278 * "response" is const RIL_CallForwardInfo ** 2279 * "response" points to an array of RIL_CallForwardInfo *'s, one for 2280 * each distinct registered phone number. 2281 * 2282 * For example, if data is forwarded to +18005551212 and voice is forwarded 2283 * to +18005559999, then two separate RIL_CallForwardInfo's should be returned 2284 * 2285 * If, however, both data and voice are forwarded to +18005551212, then 2286 * a single RIL_CallForwardInfo can be returned with the service class 2287 * set to "data + voice = 3") 2288 * 2289 * Valid errors: 2290 * SUCCESS 2291 * RADIO_NOT_AVAILABLE 2292 * SS_MODIFIED_TO_DIAL 2293 * SS_MODIFIED_TO_USSD 2294 * SS_MODIFIED_TO_SS 2295 * GENERIC_FAILURE 2296 */ 2297 #define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33 2298 2299 2300 /** 2301 * RIL_REQUEST_SET_CALL_FORWARD 2302 * 2303 * Configure call forward rule 2304 * 2305 * "data" is const RIL_CallForwardInfo * 2306 * "response" is NULL 2307 * 2308 * Valid errors: 2309 * SUCCESS 2310 * RADIO_NOT_AVAILABLE 2311 * SS_MODIFIED_TO_DIAL 2312 * SS_MODIFIED_TO_USSD 2313 * SS_MODIFIED_TO_SS 2314 * GENERIC_FAILURE 2315 */ 2316 #define RIL_REQUEST_SET_CALL_FORWARD 34 2317 2318 2319 /** 2320 * RIL_REQUEST_QUERY_CALL_WAITING 2321 * 2322 * Query current call waiting state 2323 * 2324 * "data" is const int * 2325 * ((const int *)data)[0] is the TS 27.007 service class to query. 2326 * "response" is a const int * 2327 * ((const int *)response)[0] is 0 for "disabled" and 1 for "enabled" 2328 * 2329 * If ((const int *)response)[0] is = 1, then ((const int *)response)[1] 2330 * must follow, with the TS 27.007 service class bit vector of services 2331 * for which call waiting is enabled. 2332 * 2333 * For example, if ((const int *)response)[0] is 1 and 2334 * ((const int *)response)[1] is 3, then call waiting is enabled for data 2335 * and voice and disabled for everything else 2336 * 2337 * Valid errors: 2338 * SUCCESS 2339 * RADIO_NOT_AVAILABLE 2340 * SS_MODIFIED_TO_DIAL 2341 * SS_MODIFIED_TO_USSD 2342 * SS_MODIFIED_TO_SS 2343 * GENERIC_FAILURE 2344 */ 2345 #define RIL_REQUEST_QUERY_CALL_WAITING 35 2346 2347 2348 /** 2349 * RIL_REQUEST_SET_CALL_WAITING 2350 * 2351 * Configure current call waiting state 2352 * 2353 * "data" is const int * 2354 * ((const int *)data)[0] is 0 for "disabled" and 1 for "enabled" 2355 * ((const int *)data)[1] is the TS 27.007 service class bit vector of 2356 * services to modify 2357 * "response" is NULL 2358 * 2359 * Valid errors: 2360 * SUCCESS 2361 * RADIO_NOT_AVAILABLE 2362 * SS_MODIFIED_TO_DIAL 2363 * SS_MODIFIED_TO_USSD 2364 * SS_MODIFIED_TO_SS 2365 * GENERIC_FAILURE 2366 */ 2367 #define RIL_REQUEST_SET_CALL_WAITING 36 2368 2369 /** 2370 * RIL_REQUEST_SMS_ACKNOWLEDGE 2371 * 2372 * Acknowledge successful or failed receipt of SMS previously indicated 2373 * via RIL_UNSOL_RESPONSE_NEW_SMS 2374 * 2375 * "data" is int * 2376 * ((int *)data)[0] is 1 on successful receipt 2377 * (basically, AT+CNMA=1 from TS 27.005 2378 * is 0 on failed receipt 2379 * (basically, AT+CNMA=2 from TS 27.005) 2380 * ((int *)data)[1] if data[0] is 0, this contains the failure cause as defined 2381 * in TS 23.040, 9.2.3.22. Currently only 0xD3 (memory 2382 * capacity exceeded) and 0xFF (unspecified error) are 2383 * reported. 2384 * 2385 * "response" is NULL 2386 * 2387 * FIXME would like request that specified RP-ACK/RP-ERROR PDU 2388 * 2389 * Valid errors: 2390 * SUCCESS 2391 * RADIO_NOT_AVAILABLE 2392 * GENERIC_FAILURE 2393 */ 2394 #define RIL_REQUEST_SMS_ACKNOWLEDGE 37 2395 2396 /** 2397 * RIL_REQUEST_GET_IMEI - DEPRECATED 2398 * 2399 * Get the device IMEI, including check digit 2400 * 2401 * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY 2402 * Valid when RadioState is not RADIO_STATE_UNAVAILABLE 2403 * 2404 * "data" is NULL 2405 * "response" is a const char * containing the IMEI 2406 * 2407 * Valid errors: 2408 * SUCCESS 2409 * RADIO_NOT_AVAILABLE (radio resetting) 2410 * GENERIC_FAILURE 2411 */ 2412 2413 #define RIL_REQUEST_GET_IMEI 38 2414 2415 /** 2416 * RIL_REQUEST_GET_IMEISV - DEPRECATED 2417 * 2418 * Get the device IMEISV, which should be two decimal digits 2419 * 2420 * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY 2421 * Valid when RadioState is not RADIO_STATE_UNAVAILABLE 2422 * 2423 * "data" is NULL 2424 * "response" is a const char * containing the IMEISV 2425 * 2426 * Valid errors: 2427 * SUCCESS 2428 * RADIO_NOT_AVAILABLE (radio resetting) 2429 * GENERIC_FAILURE 2430 */ 2431 2432 #define RIL_REQUEST_GET_IMEISV 39 2433 2434 2435 /** 2436 * RIL_REQUEST_ANSWER 2437 * 2438 * Answer incoming call 2439 * 2440 * Will not be called for WAITING calls. 2441 * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE will be used in this case 2442 * instead 2443 * 2444 * "data" is NULL 2445 * "response" is NULL 2446 * 2447 * Valid errors: 2448 * SUCCESS 2449 * RADIO_NOT_AVAILABLE (radio resetting) 2450 * GENERIC_FAILURE 2451 */ 2452 2453 #define RIL_REQUEST_ANSWER 40 2454 2455 /** 2456 * RIL_REQUEST_DEACTIVATE_DATA_CALL 2457 * 2458 * Deactivate packet data connection and remove from the 2459 * data call list if SUCCESS is returned. Any other return 2460 * values should also try to remove the call from the list, 2461 * but that may not be possible. In any event a 2462 * RIL_REQUEST_RADIO_POWER off/on must clear the list. An 2463 * RIL_UNSOL_DATA_CALL_LIST_CHANGED is not expected to be 2464 * issued because of an RIL_REQUEST_DEACTIVATE_DATA_CALL. 2465 * 2466 * "data" is const char ** 2467 * ((char**)data)[0] indicating CID 2468 * ((char**)data)[1] indicating Disconnect Reason 2469 * 0 => No specific reason specified 2470 * 1 => Radio shutdown requested 2471 * 2472 * "response" is NULL 2473 * 2474 * Valid errors: 2475 * SUCCESS 2476 * RADIO_NOT_AVAILABLE 2477 * GENERIC_FAILURE 2478 * 2479 * See also: RIL_REQUEST_SETUP_DATA_CALL 2480 */ 2481 #define RIL_REQUEST_DEACTIVATE_DATA_CALL 41 2482 2483 /** 2484 * RIL_REQUEST_QUERY_FACILITY_LOCK 2485 * 2486 * Query the status of a facility lock state 2487 * 2488 * "data" is const char ** 2489 * ((const char **)data)[0] is the facility string code from TS 27.007 7.4 2490 * (eg "AO" for BAOC, "SC" for SIM lock) 2491 * ((const char **)data)[1] is the password, or "" if not required 2492 * ((const char **)data)[2] is the TS 27.007 service class bit vector of 2493 * services to query 2494 * ((const char **)data)[3] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 2495 * This is only applicable in the case of Fixed Dialing Numbers 2496 * (FDN) requests. 2497 * 2498 * "response" is an int * 2499 * ((const int *)response) 0 is the TS 27.007 service class bit vector of 2500 * services for which the specified barring facility 2501 * is active. "0" means "disabled for all" 2502 * 2503 * 2504 * Valid errors: 2505 * SUCCESS 2506 * RADIO_NOT_AVAILABLE 2507 * SS_MODIFIED_TO_DIAL 2508 * SS_MODIFIED_TO_USSD 2509 * SS_MODIFIED_TO_SS 2510 * GENERIC_FAILURE 2511 * 2512 */ 2513 #define RIL_REQUEST_QUERY_FACILITY_LOCK 42 2514 2515 /** 2516 * RIL_REQUEST_SET_FACILITY_LOCK 2517 * 2518 * Enable/disable one facility lock 2519 * 2520 * "data" is const char ** 2521 * 2522 * ((const char **)data)[0] = facility string code from TS 27.007 7.4 2523 * (eg "AO" for BAOC) 2524 * ((const char **)data)[1] = "0" for "unlock" and "1" for "lock" 2525 * ((const char **)data)[2] = password 2526 * ((const char **)data)[3] = string representation of decimal TS 27.007 2527 * service class bit vector. Eg, the string 2528 * "1" means "set this facility for voice services" 2529 * ((const char **)data)[4] = AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. 2530 * This is only applicable in the case of Fixed Dialing Numbers 2531 * (FDN) requests. 2532 * 2533 * "response" is int * 2534 * ((int *)response)[0] is the number of retries remaining, or -1 if unknown 2535 * 2536 * Valid errors: 2537 * SUCCESS 2538 * RADIO_NOT_AVAILABLE 2539 * SS_MODIFIED_TO_DIAL 2540 * SS_MODIFIED_TO_USSD 2541 * SS_MODIFIED_TO_SS 2542 * GENERIC_FAILURE 2543 * 2544 */ 2545 #define RIL_REQUEST_SET_FACILITY_LOCK 43 2546 2547 /** 2548 * RIL_REQUEST_CHANGE_BARRING_PASSWORD 2549 * 2550 * Change call barring facility password 2551 * 2552 * "data" is const char ** 2553 * 2554 * ((const char **)data)[0] = facility string code from TS 27.007 7.4 2555 * (eg "AO" for BAOC) 2556 * ((const char **)data)[1] = old password 2557 * ((const char **)data)[2] = new password 2558 * 2559 * "response" is NULL 2560 * 2561 * Valid errors: 2562 * SUCCESS 2563 * RADIO_NOT_AVAILABLE 2564 * SS_MODIFIED_TO_DIAL 2565 * SS_MODIFIED_TO_USSD 2566 * SS_MODIFIED_TO_SS 2567 * GENERIC_FAILURE 2568 * 2569 */ 2570 #define RIL_REQUEST_CHANGE_BARRING_PASSWORD 44 2571 2572 /** 2573 * RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE 2574 * 2575 * Query current network selectin mode 2576 * 2577 * "data" is NULL 2578 * 2579 * "response" is int * 2580 * ((const int *)response)[0] is 2581 * 0 for automatic selection 2582 * 1 for manual selection 2583 * 2584 * Valid errors: 2585 * SUCCESS 2586 * RADIO_NOT_AVAILABLE 2587 * GENERIC_FAILURE 2588 * 2589 */ 2590 #define RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE 45 2591 2592 /** 2593 * RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 2594 * 2595 * Specify that the network should be selected automatically 2596 * 2597 * "data" is NULL 2598 * "response" is NULL 2599 * 2600 * This request must not respond until the new operator is selected 2601 * and registered 2602 * 2603 * Valid errors: 2604 * SUCCESS 2605 * RADIO_NOT_AVAILABLE 2606 * ILLEGAL_SIM_OR_ME 2607 * GENERIC_FAILURE 2608 * 2609 * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and 2610 * no retries needed, such as illegal SIM or ME. 2611 * Returns GENERIC_FAILURE for all other causes that might be 2612 * fixed by retries. 2613 * 2614 */ 2615 #define RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 46 2616 2617 /** 2618 * RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 2619 * 2620 * Manually select a specified network. 2621 * 2622 * "data" is const char * specifying MCCMNC of network to select (eg "310170") 2623 * "response" is NULL 2624 * 2625 * This request must not respond until the new operator is selected 2626 * and registered 2627 * 2628 * Valid errors: 2629 * SUCCESS 2630 * RADIO_NOT_AVAILABLE 2631 * ILLEGAL_SIM_OR_ME 2632 * GENERIC_FAILURE 2633 * 2634 * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and 2635 * no retries needed, such as illegal SIM or ME. 2636 * Returns GENERIC_FAILURE for all other causes that might be 2637 * fixed by retries. 2638 * 2639 */ 2640 #define RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 47 2641 2642 /** 2643 * RIL_REQUEST_QUERY_AVAILABLE_NETWORKS 2644 * 2645 * Scans for available networks 2646 * 2647 * "data" is NULL 2648 * "response" is const char ** that should be an array of n*4 strings, where 2649 * n is the number of available networks 2650 * For each available network: 2651 * 2652 * ((const char **)response)[n+0] is long alpha ONS or EONS 2653 * ((const char **)response)[n+1] is short alpha ONS or EONS 2654 * ((const char **)response)[n+2] is 5 or 6 digit numeric code (MCC + MNC) 2655 * ((const char **)response)[n+3] is a string value of the status: 2656 * "unknown" 2657 * "available" 2658 * "current" 2659 * "forbidden" 2660 * 2661 * This request must not respond until the new operator is selected 2662 * and registered 2663 * 2664 * Valid errors: 2665 * SUCCESS 2666 * RADIO_NOT_AVAILABLE 2667 * GENERIC_FAILURE 2668 * 2669 */ 2670 #define RIL_REQUEST_QUERY_AVAILABLE_NETWORKS 48 2671 2672 /** 2673 * RIL_REQUEST_DTMF_START 2674 * 2675 * Start playing a DTMF tone. Continue playing DTMF tone until 2676 * RIL_REQUEST_DTMF_STOP is received 2677 * 2678 * If a RIL_REQUEST_DTMF_START is received while a tone is currently playing, 2679 * it should cancel the previous tone and play the new one. 2680 * 2681 * "data" is a char * 2682 * ((char *)data)[0] is a single character with one of 12 values: 0-9,*,# 2683 * "response" is NULL 2684 * 2685 * Valid errors: 2686 * SUCCESS 2687 * RADIO_NOT_AVAILABLE 2688 * GENERIC_FAILURE 2689 * 2690 * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_STOP 2691 */ 2692 #define RIL_REQUEST_DTMF_START 49 2693 2694 /** 2695 * RIL_REQUEST_DTMF_STOP 2696 * 2697 * Stop playing a currently playing DTMF tone. 2698 * 2699 * "data" is NULL 2700 * "response" is NULL 2701 * 2702 * Valid errors: 2703 * SUCCESS 2704 * RADIO_NOT_AVAILABLE 2705 * GENERIC_FAILURE 2706 * 2707 * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_START 2708 */ 2709 #define RIL_REQUEST_DTMF_STOP 50 2710 2711 /** 2712 * RIL_REQUEST_BASEBAND_VERSION 2713 * 2714 * Return string value indicating baseband version, eg 2715 * response from AT+CGMR 2716 * 2717 * "data" is NULL 2718 * "response" is const char * containing version string for log reporting 2719 * 2720 * Valid errors: 2721 * SUCCESS 2722 * RADIO_NOT_AVAILABLE 2723 * GENERIC_FAILURE 2724 * 2725 */ 2726 #define RIL_REQUEST_BASEBAND_VERSION 51 2727 2728 /** 2729 * RIL_REQUEST_SEPARATE_CONNECTION 2730 * 2731 * Separate a party from a multiparty call placing the multiparty call 2732 * (less the specified party) on hold and leaving the specified party 2733 * as the only other member of the current (active) call 2734 * 2735 * Like AT+CHLD=2x 2736 * 2737 * See TS 22.084 1.3.8.2 (iii) 2738 * TS 22.030 6.5.5 "Entering "2X followed by send" 2739 * TS 27.007 "AT+CHLD=2x" 2740 * 2741 * "data" is an int * 2742 * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) "response" is NULL 2743 * 2744 * "response" is NULL 2745 * 2746 * Valid errors: 2747 * SUCCESS 2748 * RADIO_NOT_AVAILABLE (radio resetting) 2749 * GENERIC_FAILURE 2750 */ 2751 #define RIL_REQUEST_SEPARATE_CONNECTION 52 2752 2753 2754 /** 2755 * RIL_REQUEST_SET_MUTE 2756 * 2757 * Turn on or off uplink (microphone) mute. 2758 * 2759 * Will only be sent while voice call is active. 2760 * Will always be reset to "disable mute" when a new voice call is initiated 2761 * 2762 * "data" is an int * 2763 * (int *)data)[0] is 1 for "enable mute" and 0 for "disable mute" 2764 * 2765 * "response" is NULL 2766 * 2767 * Valid errors: 2768 * SUCCESS 2769 * RADIO_NOT_AVAILABLE (radio resetting) 2770 * GENERIC_FAILURE 2771 */ 2772 2773 #define RIL_REQUEST_SET_MUTE 53 2774 2775 /** 2776 * RIL_REQUEST_GET_MUTE 2777 * 2778 * Queries the current state of the uplink mute setting 2779 * 2780 * "data" is NULL 2781 * "response" is an int * 2782 * (int *)response)[0] is 1 for "mute enabled" and 0 for "mute disabled" 2783 * 2784 * Valid errors: 2785 * SUCCESS 2786 * RADIO_NOT_AVAILABLE (radio resetting) 2787 * SS_MODIFIED_TO_DIAL 2788 * SS_MODIFIED_TO_USSD 2789 * SS_MODIFIED_TO_SS 2790 * GENERIC_FAILURE 2791 */ 2792 2793 #define RIL_REQUEST_GET_MUTE 54 2794 2795 /** 2796 * RIL_REQUEST_QUERY_CLIP 2797 * 2798 * Queries the status of the CLIP supplementary service 2799 * 2800 * (for MMI code "*#30#") 2801 * 2802 * "data" is NULL 2803 * "response" is an int * 2804 * (int *)response)[0] is 1 for "CLIP provisioned" 2805 * and 0 for "CLIP not provisioned" 2806 * and 2 for "unknown, e.g. no network etc" 2807 * 2808 * Valid errors: 2809 * SUCCESS 2810 * RADIO_NOT_AVAILABLE (radio resetting) 2811 * GENERIC_FAILURE 2812 */ 2813 2814 #define RIL_REQUEST_QUERY_CLIP 55 2815 2816 /** 2817 * RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE - Deprecated use the status 2818 * field in RIL_Data_Call_Response_v6. 2819 * 2820 * Requests the failure cause code for the most recently failed PDP 2821 * context or CDMA data connection active 2822 * replaces RIL_REQUEST_LAST_PDP_FAIL_CAUSE 2823 * 2824 * "data" is NULL 2825 * 2826 * "response" is a "int *" 2827 * ((int *)response)[0] is an integer cause code defined in TS 24.008 2828 * section 6.1.3.1.3 or close approximation 2829 * 2830 * If the implementation does not have access to the exact cause codes, 2831 * then it should return one of the values listed in 2832 * RIL_DataCallFailCause, as the UI layer needs to distinguish these 2833 * cases for error notification 2834 * and potential retries. 2835 * 2836 * Valid errors: 2837 * SUCCESS 2838 * RADIO_NOT_AVAILABLE 2839 * GENERIC_FAILURE 2840 * 2841 * See also: RIL_REQUEST_LAST_CALL_FAIL_CAUSE 2842 * 2843 * Deprecated use the status field in RIL_Data_Call_Response_v6. 2844 */ 2845 2846 #define RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE 56 2847 2848 /** 2849 * RIL_REQUEST_DATA_CALL_LIST 2850 * 2851 * Returns the data call list. An entry is added when a 2852 * RIL_REQUEST_SETUP_DATA_CALL is issued and removed on a 2853 * RIL_REQUEST_DEACTIVATE_DATA_CALL. The list is emptied 2854 * when RIL_REQUEST_RADIO_POWER off/on is issued. 2855 * 2856 * "data" is NULL 2857 * "response" is an array of RIL_Data_Call_Response_v6 2858 * 2859 * Valid errors: 2860 * SUCCESS 2861 * RADIO_NOT_AVAILABLE (radio resetting) 2862 * GENERIC_FAILURE 2863 * 2864 * See also: RIL_UNSOL_DATA_CALL_LIST_CHANGED 2865 */ 2866 2867 #define RIL_REQUEST_DATA_CALL_LIST 57 2868 2869 /** 2870 * RIL_REQUEST_RESET_RADIO - DEPRECATED 2871 * 2872 * Request a radio reset. The RIL implementation may postpone 2873 * the reset until after this request is responded to if the baseband 2874 * is presently busy. 2875 * 2876 * The request is DEPRECATED, use RIL_REQUEST_RADIO_POWER 2877 * 2878 * "data" is NULL 2879 * "response" is NULL 2880 * 2881 * Valid errors: 2882 * SUCCESS 2883 * RADIO_NOT_AVAILABLE (radio resetting) 2884 * GENERIC_FAILURE 2885 * REQUEST_NOT_SUPPORTED 2886 */ 2887 2888 #define RIL_REQUEST_RESET_RADIO 58 2889 2890 /** 2891 * RIL_REQUEST_OEM_HOOK_RAW 2892 * 2893 * This request reserved for OEM-specific uses. It passes raw byte arrays 2894 * back and forth. 2895 * 2896 * It can be invoked on the Java side from 2897 * com.android.internal.telephony.Phone.invokeOemRilRequestRaw() 2898 * 2899 * "data" is a char * of bytes copied from the byte[] data argument in java 2900 * "response" is a char * of bytes that will returned via the 2901 * caller's "response" Message here: 2902 * (byte[])(((AsyncResult)response.obj).result) 2903 * 2904 * An error response here will result in 2905 * (((AsyncResult)response.obj).result) == null and 2906 * (((AsyncResult)response.obj).exception) being an instance of 2907 * com.android.internal.telephony.gsm.CommandException 2908 * 2909 * Valid errors: 2910 * All 2911 */ 2912 2913 #define RIL_REQUEST_OEM_HOOK_RAW 59 2914 2915 /** 2916 * RIL_REQUEST_OEM_HOOK_STRINGS 2917 * 2918 * This request reserved for OEM-specific uses. It passes strings 2919 * back and forth. 2920 * 2921 * It can be invoked on the Java side from 2922 * com.android.internal.telephony.Phone.invokeOemRilRequestStrings() 2923 * 2924 * "data" is a const char **, representing an array of null-terminated UTF-8 2925 * strings copied from the "String[] strings" argument to 2926 * invokeOemRilRequestStrings() 2927 * 2928 * "response" is a const char **, representing an array of null-terminated UTF-8 2929 * stings that will be returned via the caller's response message here: 2930 * 2931 * (String[])(((AsyncResult)response.obj).result) 2932 * 2933 * An error response here will result in 2934 * (((AsyncResult)response.obj).result) == null and 2935 * (((AsyncResult)response.obj).exception) being an instance of 2936 * com.android.internal.telephony.gsm.CommandException 2937 * 2938 * Valid errors: 2939 * All 2940 */ 2941 2942 #define RIL_REQUEST_OEM_HOOK_STRINGS 60 2943 2944 /** 2945 * RIL_REQUEST_SCREEN_STATE 2946 * 2947 * Indicates the current state of the screen. When the screen is off, the 2948 * RIL should notify the baseband to suppress certain notifications (eg, 2949 * signal strength and changes in LAC/CID or BID/SID/NID/latitude/longitude) 2950 * in an effort to conserve power. These notifications should resume when the 2951 * screen is on. 2952 * 2953 * "data" is int * 2954 * ((int *)data)[0] is == 1 for "Screen On" 2955 * ((int *)data)[0] is == 0 for "Screen Off" 2956 * 2957 * "response" is NULL 2958 * 2959 * Valid errors: 2960 * SUCCESS 2961 * GENERIC_FAILURE 2962 */ 2963 #define RIL_REQUEST_SCREEN_STATE 61 2964 2965 2966 /** 2967 * RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION 2968 * 2969 * Enables/disables supplementary service related notifications 2970 * from the network. 2971 * 2972 * Notifications are reported via RIL_UNSOL_SUPP_SVC_NOTIFICATION. 2973 * 2974 * "data" is int * 2975 * ((int *)data)[0] is == 1 for notifications enabled 2976 * ((int *)data)[0] is == 0 for notifications disabled 2977 * 2978 * "response" is NULL 2979 * 2980 * Valid errors: 2981 * SUCCESS 2982 * RADIO_NOT_AVAILABLE 2983 * GENERIC_FAILURE 2984 * 2985 * See also: RIL_UNSOL_SUPP_SVC_NOTIFICATION. 2986 */ 2987 #define RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION 62 2988 2989 /** 2990 * RIL_REQUEST_WRITE_SMS_TO_SIM 2991 * 2992 * Stores a SMS message to SIM memory. 2993 * 2994 * "data" is RIL_SMS_WriteArgs * 2995 * 2996 * "response" is int * 2997 * ((const int *)response)[0] is the record index where the message is stored. 2998 * 2999 * Valid errors: 3000 * SUCCESS 3001 * GENERIC_FAILURE 3002 * 3003 */ 3004 #define RIL_REQUEST_WRITE_SMS_TO_SIM 63 3005 3006 /** 3007 * RIL_REQUEST_DELETE_SMS_ON_SIM 3008 * 3009 * Deletes a SMS message from SIM memory. 3010 * 3011 * "data" is int * 3012 * ((int *)data)[0] is the record index of the message to delete. 3013 * 3014 * "response" is NULL 3015 * 3016 * Valid errors: 3017 * SUCCESS 3018 * GENERIC_FAILURE 3019 * 3020 */ 3021 #define RIL_REQUEST_DELETE_SMS_ON_SIM 64 3022 3023 /** 3024 * RIL_REQUEST_SET_BAND_MODE 3025 * 3026 * Assign a specified band for RF configuration. 3027 * 3028 * "data" is int * 3029 * ((int *)data)[0] is == 0 for "unspecified" (selected by baseband automatically) 3030 * ((int *)data)[0] is == 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000) 3031 * ((int *)data)[0] is == 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900) 3032 * ((int *)data)[0] is == 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000) 3033 * ((int *)data)[0] is == 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000) 3034 * ((int *)data)[0] is == 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850) 3035 * ((int *)data)[0] is == 6 for "Cellular (800-MHz Band)" 3036 * ((int *)data)[0] is == 7 for "PCS (1900-MHz Band)" 3037 * ((int *)data)[0] is == 8 for "Band Class 3 (JTACS Band)" 3038 * ((int *)data)[0] is == 9 for "Band Class 4 (Korean PCS Band)" 3039 * ((int *)data)[0] is == 10 for "Band Class 5 (450-MHz Band)" 3040 * ((int *)data)[0] is == 11 for "Band Class 6 (2-GMHz IMT2000 Band)" 3041 * ((int *)data)[0] is == 12 for "Band Class 7 (Upper 700-MHz Band)" 3042 * ((int *)data)[0] is == 13 for "Band Class 8 (1800-MHz Band)" 3043 * ((int *)data)[0] is == 14 for "Band Class 9 (900-MHz Band)" 3044 * ((int *)data)[0] is == 15 for "Band Class 10 (Secondary 800-MHz Band)" 3045 * ((int *)data)[0] is == 16 for "Band Class 11 (400-MHz European PAMR Band)" 3046 * ((int *)data)[0] is == 17 for "Band Class 15 (AWS Band)" 3047 * ((int *)data)[0] is == 18 for "Band Class 16 (US 2.5-GHz Band)" 3048 * 3049 * "response" is NULL 3050 * 3051 * Valid errors: 3052 * SUCCESS 3053 * RADIO_NOT_AVAILABLE 3054 * GENERIC_FAILURE 3055 */ 3056 #define RIL_REQUEST_SET_BAND_MODE 65 3057 3058 /** 3059 * RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE 3060 * 3061 * Query the list of band mode supported by RF. 3062 * 3063 * "data" is NULL 3064 * 3065 * "response" is int * 3066 * "response" points to an array of int's, the int[0] is the size of array, reset is one for 3067 * each available band mode. 3068 * 3069 * 0 for "unspecified" (selected by baseband automatically) 3070 * 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000) 3071 * 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900) 3072 * 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000) 3073 * 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000) 3074 * 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850) 3075 * 6 for "Cellular (800-MHz Band)" 3076 * 7 for "PCS (1900-MHz Band)" 3077 * 8 for "Band Class 3 (JTACS Band)" 3078 * 9 for "Band Class 4 (Korean PCS Band)" 3079 * 10 for "Band Class 5 (450-MHz Band)" 3080 * 11 for "Band Class 6 (2-GMHz IMT2000 Band)" 3081 * 12 for "Band Class 7 (Upper 700-MHz Band)" 3082 * 13 for "Band Class 8 (1800-MHz Band)" 3083 * 14 for "Band Class 9 (900-MHz Band)" 3084 * 15 for "Band Class 10 (Secondary 800-MHz Band)" 3085 * 16 for "Band Class 11 (400-MHz European PAMR Band)" 3086 * 17 for "Band Class 15 (AWS Band)" 3087 * 18 for "Band Class 16 (US 2.5-GHz Band)" 3088 * 3089 * Valid errors: 3090 * SUCCESS 3091 * RADIO_NOT_AVAILABLE 3092 * GENERIC_FAILURE 3093 * 3094 * See also: RIL_REQUEST_SET_BAND_MODE 3095 */ 3096 #define RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE 66 3097 3098 /** 3099 * RIL_REQUEST_STK_GET_PROFILE 3100 * 3101 * Requests the profile of SIM tool kit. 3102 * The profile indicates the SAT/USAT features supported by ME. 3103 * The SAT/USAT features refer to 3GPP TS 11.14 and 3GPP TS 31.111 3104 * 3105 * "data" is NULL 3106 * 3107 * "response" is a const char * containing SAT/USAT profile 3108 * in hexadecimal format string starting with first byte of terminal profile 3109 * 3110 * Valid errors: 3111 * RIL_E_SUCCESS 3112 * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) 3113 * RIL_E_GENERIC_FAILURE 3114 */ 3115 #define RIL_REQUEST_STK_GET_PROFILE 67 3116 3117 /** 3118 * RIL_REQUEST_STK_SET_PROFILE 3119 * 3120 * Download the STK terminal profile as part of SIM initialization 3121 * procedure 3122 * 3123 * "data" is a const char * containing SAT/USAT profile 3124 * in hexadecimal format string starting with first byte of terminal profile 3125 * 3126 * "response" is NULL 3127 * 3128 * Valid errors: 3129 * RIL_E_SUCCESS 3130 * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) 3131 * RIL_E_GENERIC_FAILURE 3132 */ 3133 #define RIL_REQUEST_STK_SET_PROFILE 68 3134 3135 /** 3136 * RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND 3137 * 3138 * Requests to send a SAT/USAT envelope command to SIM. 3139 * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111 3140 * 3141 * "data" is a const char * containing SAT/USAT command 3142 * in hexadecimal format string starting with command tag 3143 * 3144 * "response" is a const char * containing SAT/USAT response 3145 * in hexadecimal format string starting with first byte of response 3146 * (May be NULL) 3147 * 3148 * Valid errors: 3149 * RIL_E_SUCCESS 3150 * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) 3151 * RIL_E_GENERIC_FAILURE 3152 */ 3153 #define RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND 69 3154 3155 /** 3156 * RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE 3157 * 3158 * Requests to send a terminal response to SIM for a received 3159 * proactive command 3160 * 3161 * "data" is a const char * containing SAT/USAT response 3162 * in hexadecimal format string starting with first byte of response data 3163 * 3164 * "response" is NULL 3165 * 3166 * Valid errors: 3167 * RIL_E_SUCCESS 3168 * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) 3169 * RIL_E_GENERIC_FAILURE 3170 */ 3171 #define RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE 70 3172 3173 /** 3174 * RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM 3175 * 3176 * When STK application gets RIL_UNSOL_STK_CALL_SETUP, the call actually has 3177 * been initialized by ME already. (We could see the call has been in the 'call 3178 * list') So, STK application needs to accept/reject the call according as user 3179 * operations. 3180 * 3181 * "data" is int * 3182 * ((int *)data)[0] is > 0 for "accept" the call setup 3183 * ((int *)data)[0] is == 0 for "reject" the call setup 3184 * 3185 * "response" is NULL 3186 * 3187 * Valid errors: 3188 * RIL_E_SUCCESS 3189 * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) 3190 * RIL_E_GENERIC_FAILURE 3191 */ 3192 #define RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM 71 3193 3194 /** 3195 * RIL_REQUEST_EXPLICIT_CALL_TRANSFER 3196 * 3197 * Connects the two calls and disconnects the subscriber from both calls. 3198 * 3199 * "data" is NULL 3200 * "response" is NULL 3201 * 3202 * Valid errors: 3203 * SUCCESS 3204 * RADIO_NOT_AVAILABLE (radio resetting) 3205 * GENERIC_FAILURE 3206 */ 3207 #define RIL_REQUEST_EXPLICIT_CALL_TRANSFER 72 3208 3209 /** 3210 * RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 3211 * 3212 * Requests to set the preferred network type for searching and registering 3213 * (CS/PS domain, RAT, and operation mode) 3214 * 3215 * "data" is int * which is RIL_PreferredNetworkType 3216 * 3217 * "response" is NULL 3218 * 3219 * Valid errors: 3220 * SUCCESS 3221 * RADIO_NOT_AVAILABLE (radio resetting) 3222 * GENERIC_FAILURE 3223 * MODE_NOT_SUPPORTED 3224 */ 3225 #define RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 73 3226 3227 /** 3228 * RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE 3229 * 3230 * Query the preferred network type (CS/PS domain, RAT, and operation mode) 3231 * for searching and registering 3232 * 3233 * "data" is NULL 3234 * 3235 * "response" is int * 3236 * ((int *)reponse)[0] is == RIL_PreferredNetworkType 3237 * 3238 * Valid errors: 3239 * SUCCESS 3240 * RADIO_NOT_AVAILABLE 3241 * GENERIC_FAILURE 3242 * 3243 * See also: RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 3244 */ 3245 #define RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE 74 3246 3247 /** 3248 * RIL_REQUEST_NEIGHBORING_CELL_IDS 3249 * 3250 * Request neighboring cell id in GSM network 3251 * 3252 * "data" is NULL 3253 * "response" must be a " const RIL_NeighboringCell** " 3254 * 3255 * Valid errors: 3256 * SUCCESS 3257 * RADIO_NOT_AVAILABLE 3258 * GENERIC_FAILURE 3259 */ 3260 #define RIL_REQUEST_GET_NEIGHBORING_CELL_IDS 75 3261 3262 /** 3263 * RIL_REQUEST_SET_LOCATION_UPDATES 3264 * 3265 * Enables/disables network state change notifications due to changes in 3266 * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA). 3267 * Basically +CREG=2 vs. +CREG=1 (TS 27.007). 3268 * 3269 * Note: The RIL implementation should default to "updates enabled" 3270 * when the screen is on and "updates disabled" when the screen is off. 3271 * 3272 * "data" is int * 3273 * ((int *)data)[0] is == 1 for updates enabled (+CREG=2) 3274 * ((int *)data)[0] is == 0 for updates disabled (+CREG=1) 3275 * 3276 * "response" is NULL 3277 * 3278 * Valid errors: 3279 * SUCCESS 3280 * RADIO_NOT_AVAILABLE 3281 * GENERIC_FAILURE 3282 * 3283 * See also: RIL_REQUEST_SCREEN_STATE, RIL_UNSOL_RESPONSE_NETWORK_STATE_CHANGED 3284 */ 3285 #define RIL_REQUEST_SET_LOCATION_UPDATES 76 3286 3287 /** 3288 * RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 3289 * 3290 * Request to set the location where the CDMA subscription shall 3291 * be retrieved 3292 * 3293 * "data" is int * 3294 * ((int *)data)[0] is == RIL_CdmaSubscriptionSource 3295 * 3296 * "response" is NULL 3297 * 3298 * Valid errors: 3299 * SUCCESS 3300 * RADIO_NOT_AVAILABLE 3301 * GENERIC_FAILURE 3302 * SIM_ABSENT 3303 * SUBSCRIPTION_NOT_AVAILABLE 3304 * 3305 * See also: RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 3306 */ 3307 #define RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 77 3308 3309 /** 3310 * RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE 3311 * 3312 * Request to set the roaming preferences in CDMA 3313 * 3314 * "data" is int * 3315 * ((int *)data)[0] is == 0 for Home Networks only, as defined in PRL 3316 * ((int *)data)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL 3317 * ((int *)data)[0] is == 2 for Roaming on Any Network, as defined in the PRL 3318 * 3319 * "response" is NULL 3320 * 3321 * Valid errors: 3322 * SUCCESS 3323 * RADIO_NOT_AVAILABLE 3324 * GENERIC_FAILURE 3325 */ 3326 #define RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE 78 3327 3328 /** 3329 * RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE 3330 * 3331 * Request the actual setting of the roaming preferences in CDMA in the modem 3332 * 3333 * "data" is NULL 3334 * 3335 * "response" is int * 3336 * ((int *)response)[0] is == 0 for Home Networks only, as defined in PRL 3337 * ((int *)response)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL 3338 * ((int *)response)[0] is == 2 for Roaming on Any Network, as defined in the PRL 3339 * 3340 * "response" is NULL 3341 * 3342 * Valid errors: 3343 * SUCCESS 3344 * RADIO_NOT_AVAILABLE 3345 * GENERIC_FAILURE 3346 */ 3347 #define RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE 79 3348 3349 /** 3350 * RIL_REQUEST_SET_TTY_MODE 3351 * 3352 * Request to set the TTY mode 3353 * 3354 * "data" is int * 3355 * ((int *)data)[0] is == 0 for TTY off 3356 * ((int *)data)[0] is == 1 for TTY Full 3357 * ((int *)data)[0] is == 2 for TTY HCO (hearing carryover) 3358 * ((int *)data)[0] is == 3 for TTY VCO (voice carryover) 3359 * 3360 * "response" is NULL 3361 * 3362 * Valid errors: 3363 * SUCCESS 3364 * RADIO_NOT_AVAILABLE 3365 * GENERIC_FAILURE 3366 */ 3367 #define RIL_REQUEST_SET_TTY_MODE 80 3368 3369 /** 3370 * RIL_REQUEST_QUERY_TTY_MODE 3371 * 3372 * Request the setting of TTY mode 3373 * 3374 * "data" is NULL 3375 * 3376 * "response" is int * 3377 * ((int *)response)[0] is == 0 for TTY off 3378 * ((int *)response)[0] is == 1 for TTY Full 3379 * ((int *)response)[0] is == 2 for TTY HCO (hearing carryover) 3380 * ((int *)response)[0] is == 3 for TTY VCO (voice carryover) 3381 * 3382 * "response" is NULL 3383 * 3384 * Valid errors: 3385 * SUCCESS 3386 * RADIO_NOT_AVAILABLE 3387 * GENERIC_FAILURE 3388 */ 3389 #define RIL_REQUEST_QUERY_TTY_MODE 81 3390 3391 /** 3392 * RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE 3393 * 3394 * Request to set the preferred voice privacy mode used in voice 3395 * scrambling 3396 * 3397 * "data" is int * 3398 * ((int *)data)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask) 3399 * ((int *)data)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask) 3400 * 3401 * "response" is NULL 3402 * 3403 * Valid errors: 3404 * SUCCESS 3405 * RADIO_NOT_AVAILABLE 3406 * GENERIC_FAILURE 3407 */ 3408 #define RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE 82 3409 3410 /** 3411 * RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE 3412 * 3413 * Request the setting of preferred voice privacy mode 3414 * 3415 * "data" is NULL 3416 * 3417 * "response" is int * 3418 * ((int *)response)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask) 3419 * ((int *)response)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask) 3420 * 3421 * "response" is NULL 3422 * 3423 * Valid errors: 3424 * SUCCESS 3425 * RADIO_NOT_AVAILABLE 3426 * GENERIC_FAILURE 3427 */ 3428 #define RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE 83 3429 3430 /** 3431 * RIL_REQUEST_CDMA_FLASH 3432 * 3433 * Send FLASH 3434 * 3435 * "data" is const char * 3436 * ((const char *)data)[0] is a FLASH string 3437 * 3438 * "response" is NULL 3439 * 3440 * Valid errors: 3441 * SUCCESS 3442 * RADIO_NOT_AVAILABLE 3443 * GENERIC_FAILURE 3444 * 3445 */ 3446 #define RIL_REQUEST_CDMA_FLASH 84 3447 3448 /** 3449 * RIL_REQUEST_CDMA_BURST_DTMF 3450 * 3451 * Send DTMF string 3452 * 3453 * "data" is const char ** 3454 * ((const char **)data)[0] is a DTMF string 3455 * ((const char **)data)[1] is the DTMF ON length in milliseconds, or 0 to use 3456 * default 3457 * ((const char **)data)[2] is the DTMF OFF length in milliseconds, or 0 to use 3458 * default 3459 * 3460 * "response" is NULL 3461 * 3462 * Valid errors: 3463 * SUCCESS 3464 * RADIO_NOT_AVAILABLE 3465 * GENERIC_FAILURE 3466 * 3467 */ 3468 #define RIL_REQUEST_CDMA_BURST_DTMF 85 3469 3470 /** 3471 * RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY 3472 * 3473 * Takes a 26 digit string (20 digit AKEY + 6 digit checksum). 3474 * If the checksum is valid the 20 digit AKEY is written to NV, 3475 * replacing the existing AKEY no matter what it was before. 3476 * 3477 * "data" is const char * 3478 * ((const char *)data)[0] is a 26 digit string (ASCII digits '0'-'9') 3479 * where the last 6 digits are a checksum of the 3480 * first 20, as specified in TR45.AHAG 3481 * "Common Cryptographic Algorithms, Revision D.1 3482 * Section 2.2" 3483 * 3484 * "response" is NULL 3485 * 3486 * Valid errors: 3487 * SUCCESS 3488 * RADIO_NOT_AVAILABLE 3489 * GENERIC_FAILURE 3490 * 3491 */ 3492 #define RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY 86 3493 3494 /** 3495 * RIL_REQUEST_CDMA_SEND_SMS 3496 * 3497 * Send a CDMA SMS message 3498 * 3499 * "data" is const RIL_CDMA_SMS_Message * 3500 * 3501 * "response" is a const RIL_SMS_Response * 3502 * 3503 * Based on the return error, caller decides to resend if sending sms 3504 * fails. The CDMA error class is derived as follows, 3505 * SUCCESS is error class 0 (no error) 3506 * SMS_SEND_FAIL_RETRY is error class 2 (temporary failure) 3507 * and GENERIC_FAILURE is error class 3 (permanent and no retry) 3508 * 3509 * Valid errors: 3510 * SUCCESS 3511 * RADIO_NOT_AVAILABLE 3512 * SMS_SEND_FAIL_RETRY 3513 * GENERIC_FAILURE 3514 * 3515 */ 3516 #define RIL_REQUEST_CDMA_SEND_SMS 87 3517 3518 /** 3519 * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 3520 * 3521 * Acknowledge the success or failure in the receipt of SMS 3522 * previously indicated via RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 3523 * 3524 * "data" is const RIL_CDMA_SMS_Ack * 3525 * 3526 * "response" is NULL 3527 * 3528 * Valid errors: 3529 * SUCCESS 3530 * RADIO_NOT_AVAILABLE 3531 * GENERIC_FAILURE 3532 * 3533 */ 3534 #define RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 88 3535 3536 /** 3537 * RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG 3538 * 3539 * Request the setting of GSM/WCDMA Cell Broadcast SMS config. 3540 * 3541 * "data" is NULL 3542 * 3543 * "response" is a const RIL_GSM_BroadcastSmsConfigInfo ** 3544 * "responselen" is count * sizeof (RIL_GSM_BroadcastSmsConfigInfo *) 3545 * 3546 * Valid errors: 3547 * SUCCESS 3548 * RADIO_NOT_AVAILABLE 3549 * GENERIC_FAILURE 3550 * 3551 */ 3552 #define RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG 89 3553 3554 /** 3555 * RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG 3556 * 3557 * Set GSM/WCDMA Cell Broadcast SMS config 3558 * 3559 * "data" is a const RIL_GSM_BroadcastSmsConfigInfo ** 3560 * "datalen" is count * sizeof(RIL_GSM_BroadcastSmsConfigInfo *) 3561 * 3562 * "response" is NULL 3563 * 3564 * Valid errors: 3565 * SUCCESS 3566 * RADIO_NOT_AVAILABLE 3567 * GENERIC_FAILURE 3568 * 3569 */ 3570 #define RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG 90 3571 3572 /** 3573 * RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION 3574 * 3575 * Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS 3576 * 3577 * "data" is const int * 3578 * (const int *)data[0] indicates to activate or turn off the 3579 * reception of GSM/WCDMA Cell Broadcast SMS, 0-1, 3580 * 0 - Activate, 1 - Turn off 3581 * 3582 * "response" is NULL 3583 * 3584 * Valid errors: 3585 * SUCCESS 3586 * RADIO_NOT_AVAILABLE 3587 * GENERIC_FAILURE 3588 * 3589 */ 3590 #define RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION 91 3591 3592 /** 3593 * RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG 3594 * 3595 * Request the setting of CDMA Broadcast SMS config 3596 * 3597 * "data" is NULL 3598 * 3599 * "response" is a const RIL_CDMA_BroadcastSmsConfigInfo ** 3600 * "responselen" is count * sizeof (RIL_CDMA_BroadcastSmsConfigInfo *) 3601 * 3602 * Valid errors: 3603 * SUCCESS 3604 * RADIO_NOT_AVAILABLE 3605 * GENERIC_FAILURE 3606 * 3607 */ 3608 #define RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG 92 3609 3610 /** 3611 * RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG 3612 * 3613 * Set CDMA Broadcast SMS config 3614 * 3615 * "data" is an const RIL_CDMA_BroadcastSmsConfigInfo ** 3616 * "datalen" is count * sizeof(const RIL_CDMA_BroadcastSmsConfigInfo *) 3617 * 3618 * "response" is NULL 3619 * 3620 * Valid errors: 3621 * SUCCESS 3622 * RADIO_NOT_AVAILABLE 3623 * GENERIC_FAILURE 3624 * 3625 */ 3626 #define RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG 93 3627 3628 /** 3629 * RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION 3630 * 3631 * Enable or disable the reception of CDMA Broadcast SMS 3632 * 3633 * "data" is const int * 3634 * (const int *)data[0] indicates to activate or turn off the 3635 * reception of CDMA Broadcast SMS, 0-1, 3636 * 0 - Activate, 1 - Turn off 3637 * 3638 * "response" is NULL 3639 * 3640 * Valid errors: 3641 * SUCCESS 3642 * RADIO_NOT_AVAILABLE 3643 * GENERIC_FAILURE 3644 * 3645 */ 3646 #define RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION 94 3647 3648 /** 3649 * RIL_REQUEST_CDMA_SUBSCRIPTION 3650 * 3651 * Request the device MDN / H_SID / H_NID. 3652 * 3653 * The request is only allowed when CDMA subscription is available. When CDMA 3654 * subscription is changed, application layer should re-issue the request to 3655 * update the subscription information. 3656 * 3657 * If a NULL value is returned for any of the device id, it means that error 3658 * accessing the device. 3659 * 3660 * "response" is const char ** 3661 * ((const char **)response)[0] is MDN if CDMA subscription is available 3662 * ((const char **)response)[1] is a comma separated list of H_SID (Home SID) if 3663 * CDMA subscription is available, in decimal format 3664 * ((const char **)response)[2] is a comma separated list of H_NID (Home NID) if 3665 * CDMA subscription is available, in decimal format 3666 * ((const char **)response)[3] is MIN (10 digits, MIN2+MIN1) if CDMA subscription is available 3667 * ((const char **)response)[4] is PRL version if CDMA subscription is available 3668 * 3669 * Valid errors: 3670 * SUCCESS 3671 * RIL_E_SUBSCRIPTION_NOT_AVAILABLE 3672 */ 3673 3674 #define RIL_REQUEST_CDMA_SUBSCRIPTION 95 3675 3676 /** 3677 * RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM 3678 * 3679 * Stores a CDMA SMS message to RUIM memory. 3680 * 3681 * "data" is RIL_CDMA_SMS_WriteArgs * 3682 * 3683 * "response" is int * 3684 * ((const int *)response)[0] is the record index where the message is stored. 3685 * 3686 * Valid errors: 3687 * SUCCESS 3688 * RADIO_NOT_AVAILABLE 3689 * GENERIC_FAILURE 3690 * 3691 */ 3692 #define RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM 96 3693 3694 /** 3695 * RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM 3696 * 3697 * Deletes a CDMA SMS message from RUIM memory. 3698 * 3699 * "data" is int * 3700 * ((int *)data)[0] is the record index of the message to delete. 3701 * 3702 * "response" is NULL 3703 * 3704 * Valid errors: 3705 * SUCCESS 3706 * RADIO_NOT_AVAILABLE 3707 * GENERIC_FAILURE 3708 * 3709 */ 3710 #define RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM 97 3711 3712 /** 3713 * RIL_REQUEST_DEVICE_IDENTITY 3714 * 3715 * Request the device ESN / MEID / IMEI / IMEISV. 3716 * 3717 * The request is always allowed and contains GSM and CDMA device identity; 3718 * it substitutes the deprecated requests RIL_REQUEST_GET_IMEI and 3719 * RIL_REQUEST_GET_IMEISV. 3720 * 3721 * If a NULL value is returned for any of the device id, it means that error 3722 * accessing the device. 3723 * 3724 * When CDMA subscription is changed the ESN/MEID may change. The application 3725 * layer should re-issue the request to update the device identity in this case. 3726 * 3727 * "response" is const char ** 3728 * ((const char **)response)[0] is IMEI if GSM subscription is available 3729 * ((const char **)response)[1] is IMEISV if GSM subscription is available 3730 * ((const char **)response)[2] is ESN if CDMA subscription is available 3731 * ((const char **)response)[3] is MEID if CDMA subscription is available 3732 * 3733 * Valid errors: 3734 * SUCCESS 3735 * RADIO_NOT_AVAILABLE 3736 * GENERIC_FAILURE 3737 */ 3738 #define RIL_REQUEST_DEVICE_IDENTITY 98 3739 3740 /** 3741 * RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE 3742 * 3743 * Request the radio's system selection module to exit emergency 3744 * callback mode. RIL will not respond with SUCCESS until the modem has 3745 * completely exited from Emergency Callback Mode. 3746 * 3747 * "data" is NULL 3748 * 3749 * "response" is NULL 3750 * 3751 * Valid errors: 3752 * SUCCESS 3753 * RADIO_NOT_AVAILABLE 3754 * GENERIC_FAILURE 3755 * 3756 */ 3757 #define RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE 99 3758 3759 /** 3760 * RIL_REQUEST_GET_SMSC_ADDRESS 3761 * 3762 * Queries the default Short Message Service Center address on the device. 3763 * 3764 * "data" is NULL 3765 * 3766 * "response" is const char * containing the SMSC address. 3767 * 3768 * Valid errors: 3769 * SUCCESS 3770 * RADIO_NOT_AVAILABLE 3771 * GENERIC_FAILURE 3772 * 3773 */ 3774 #define RIL_REQUEST_GET_SMSC_ADDRESS 100 3775 3776 /** 3777 * RIL_REQUEST_SET_SMSC_ADDRESS 3778 * 3779 * Sets the default Short Message Service Center address on the device. 3780 * 3781 * "data" is const char * containing the SMSC address. 3782 * 3783 * "response" is NULL 3784 * 3785 * Valid errors: 3786 * SUCCESS 3787 * RADIO_NOT_AVAILABLE 3788 * GENERIC_FAILURE 3789 * 3790 */ 3791 #define RIL_REQUEST_SET_SMSC_ADDRESS 101 3792 3793 /** 3794 * RIL_REQUEST_REPORT_SMS_MEMORY_STATUS 3795 * 3796 * Indicates whether there is storage available for new SMS messages. 3797 * 3798 * "data" is int * 3799 * ((int *)data)[0] is 1 if memory is available for storing new messages 3800 * is 0 if memory capacity is exceeded 3801 * 3802 * "response" is NULL 3803 * 3804 * Valid errors: 3805 * SUCCESS 3806 * RADIO_NOT_AVAILABLE 3807 * GENERIC_FAILURE 3808 * 3809 */ 3810 #define RIL_REQUEST_REPORT_SMS_MEMORY_STATUS 102 3811 3812 /** 3813 * RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 3814 * 3815 * Indicates that the StkSerivce is running and is 3816 * ready to receive RIL_UNSOL_STK_XXXXX commands. 3817 * 3818 * "data" is NULL 3819 * "response" is NULL 3820 * 3821 * Valid errors: 3822 * SUCCESS 3823 * RADIO_NOT_AVAILABLE 3824 * GENERIC_FAILURE 3825 * 3826 */ 3827 #define RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 103 3828 3829 /** 3830 * RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 3831 * 3832 * Request to query the location where the CDMA subscription shall 3833 * be retrieved 3834 * 3835 * "data" is NULL 3836 * 3837 * "response" is int * 3838 * ((int *)data)[0] is == RIL_CdmaSubscriptionSource 3839 * 3840 * Valid errors: 3841 * SUCCESS 3842 * RADIO_NOT_AVAILABLE 3843 * GENERIC_FAILURE 3844 * SUBSCRIPTION_NOT_AVAILABLE 3845 * 3846 * See also: RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 3847 */ 3848 #define RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 104 3849 3850 /** 3851 * RIL_REQUEST_ISIM_AUTHENTICATION 3852 * 3853 * Request the ISIM application on the UICC to perform AKA 3854 * challenge/response algorithm for IMS authentication 3855 * 3856 * "data" is a const char * containing the challenge string in Base64 format 3857 * "response" is a const char * containing the response in Base64 format 3858 * 3859 * Valid errors: 3860 * SUCCESS 3861 * RADIO_NOT_AVAILABLE 3862 * GENERIC_FAILURE 3863 */ 3864 #define RIL_REQUEST_ISIM_AUTHENTICATION 105 3865 3866 /** 3867 * RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU 3868 * 3869 * Acknowledge successful or failed receipt of SMS previously indicated 3870 * via RIL_UNSOL_RESPONSE_NEW_SMS, including acknowledgement TPDU to send 3871 * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU. 3872 * 3873 * "data" is const char ** 3874 * ((const char **)data)[0] is "1" on successful receipt (send RP-ACK) 3875 * is "0" on failed receipt (send RP-ERROR) 3876 * ((const char **)data)[1] is the acknowledgement TPDU in hexadecimal format 3877 * 3878 * "response" is NULL 3879 * 3880 * Valid errors: 3881 * SUCCESS 3882 * RADIO_NOT_AVAILABLE 3883 * GENERIC_FAILURE 3884 */ 3885 #define RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU 106 3886 3887 /** 3888 * RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS 3889 * 3890 * Requests to send a SAT/USAT envelope command to SIM. 3891 * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111. 3892 * 3893 * This request has one difference from RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND: 3894 * the SW1 and SW2 status bytes from the UICC response are returned along with 3895 * the response data, using the same structure as RIL_REQUEST_SIM_IO. 3896 * 3897 * The RIL implementation shall perform the normal processing of a '91XX' 3898 * response in SW1/SW2 to retrieve the pending proactive command and send it 3899 * as an unsolicited response, as RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND does. 3900 * 3901 * "data" is a const char * containing the SAT/USAT command 3902 * in hexadecimal format starting with command tag 3903 * 3904 * "response" is a const RIL_SIM_IO_Response * 3905 * 3906 * Valid errors: 3907 * RIL_E_SUCCESS 3908 * RIL_E_RADIO_NOT_AVAILABLE (radio resetting) 3909 * RIL_E_GENERIC_FAILURE 3910 */ 3911 #define RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS 107 3912 3913 /** 3914 * RIL_REQUEST_VOICE_RADIO_TECH 3915 * 3916 * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only 3917 * when radio state is RADIO_STATE_ON 3918 * 3919 * "data" is NULL 3920 * "response" is int * 3921 * ((int *) response)[0] is of type const RIL_RadioTechnology 3922 * 3923 * Valid errors: 3924 * SUCCESS 3925 * RADIO_NOT_AVAILABLE 3926 * GENERIC_FAILURE 3927 */ 3928 #define RIL_REQUEST_VOICE_RADIO_TECH 108 3929 3930 /** 3931 * RIL_REQUEST_GET_CELL_INFO_LIST 3932 * 3933 * Request all of the current cell information known to the radio. The radio 3934 * must a list of all current cells, including the neighboring cells. If for a particular 3935 * cell information isn't known then the appropriate unknown value will be returned. 3936 * This does not cause or change the rate of RIL_UNSOL_CELL_INFO_LIST. 3937 * 3938 * "data" is NULL 3939 * 3940 * "response" is an array of RIL_CellInfo. 3941 */ 3942 #define RIL_REQUEST_GET_CELL_INFO_LIST 109 3943 3944 /** 3945 * RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 3946 * 3947 * Sets the minimum time between when RIL_UNSOL_CELL_INFO_LIST should be invoked. 3948 * A value of 0, means invoke RIL_UNSOL_CELL_INFO_LIST when any of the reported 3949 * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue 3950 * a RIL_UNSOL_CELL_INFO_LIST. 3951 * 3952 * "data" is int * 3953 * ((int *)data)[0] is minimum time in milliseconds 3954 * 3955 * "response" is NULL 3956 * 3957 * Valid errors: 3958 * SUCCESS 3959 * RADIO_NOT_AVAILABLE 3960 * GENERIC_FAILURE 3961 */ 3962 #define RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 110 3963 3964 /** 3965 * RIL_REQUEST_SET_INITIAL_ATTACH_APN 3966 * 3967 * Set an apn to initial attach network 3968 * "response" is NULL 3969 * 3970 * Valid errors: 3971 * SUCCESS 3972 * RADIO_NOT_AVAILABLE (radio resetting) 3973 * GENERIC_FAILURE 3974 * SUBSCRIPTION_NOT_AVAILABLE 3975 */ 3976 #define RIL_REQUEST_SET_INITIAL_ATTACH_APN 111 3977 3978 /** 3979 * RIL_REQUEST_IMS_REGISTRATION_STATE 3980 * 3981 * Request current IMS registration state 3982 * 3983 * "data" is NULL 3984 * 3985 * "response" is int * 3986 * ((int *)response)[0] is registration state: 3987 * 0 - Not registered 3988 * 1 - Registered 3989 * 3990 * If ((int*)response)[0] is = 1, then ((int *) response)[1] 3991 * must follow with IMS SMS format: 3992 * 3993 * ((int *) response)[1] is of type RIL_RadioTechnologyFamily 3994 * 3995 * Valid errors: 3996 * SUCCESS 3997 * RADIO_NOT_AVAILABLE 3998 * GENERIC_FAILURE 3999 */ 4000 #define RIL_REQUEST_IMS_REGISTRATION_STATE 112 4001 4002 /** 4003 * RIL_REQUEST_IMS_SEND_SMS 4004 * 4005 * Send a SMS message over IMS 4006 * 4007 * "data" is const RIL_IMS_SMS_Message * 4008 * 4009 * "response" is a const RIL_SMS_Response * 4010 * 4011 * Based on the return error, caller decides to resend if sending sms 4012 * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry. 4013 * In case of retry, data is encoded based on Voice Technology available. 4014 * 4015 * Valid errors: 4016 * SUCCESS 4017 * RADIO_NOT_AVAILABLE 4018 * SMS_SEND_FAIL_RETRY 4019 * FDN_CHECK_FAILURE 4020 * GENERIC_FAILURE 4021 * 4022 */ 4023 #define RIL_REQUEST_IMS_SEND_SMS 113 4024 4025 /** 4026 * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 4027 * 4028 * Request APDU exchange on the basic channel. This command reflects TS 27.007 4029 * "generic SIM access" operation (+CSIM). The modem must ensure proper function 4030 * of GSM/CDMA, and filter commands appropriately. It should filter 4031 * channel management and SELECT by DF name commands. 4032 * 4033 * "data" is a const RIL_SIM_APDU * 4034 * "sessionid" field should be ignored. 4035 * 4036 * "response" is a const RIL_SIM_IO_Response * 4037 * 4038 * Valid errors: 4039 * SUCCESS 4040 * RADIO_NOT_AVAILABLE 4041 * GENERIC_FAILURE 4042 */ 4043 #define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114 4044 4045 /** 4046 * RIL_REQUEST_SIM_OPEN_CHANNEL 4047 * 4048 * Open a new logical channel and select the given application. This command 4049 * reflects TS 27.007 "open logical channel" operation (+CCHO). 4050 * 4051 * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220. 4052 * 4053 * "response" is int * 4054 * ((int *)data)[0] contains the session id of the logical channel. 4055 * ((int *)data)[1] onwards may optionally contain the select response for the 4056 * open channel command with one byte per integer. 4057 * 4058 * Valid errors: 4059 * SUCCESS 4060 * RADIO_NOT_AVAILABLE 4061 * GENERIC_FAILURE 4062 * MISSING_RESOURCE 4063 * NO_SUCH_ELEMENT 4064 */ 4065 #define RIL_REQUEST_SIM_OPEN_CHANNEL 115 4066 4067 /** 4068 * RIL_REQUEST_SIM_CLOSE_CHANNEL 4069 * 4070 * Close a previously opened logical channel. This command reflects TS 27.007 4071 * "close logical channel" operation (+CCHC). 4072 * 4073 * "data" is int * 4074 * ((int *)data)[0] is the session id of logical the channel to close. 4075 * 4076 * "response" is NULL 4077 * 4078 * Valid errors: 4079 * SUCCESS 4080 * RADIO_NOT_AVAILABLE 4081 * GENERIC_FAILURE 4082 */ 4083 #define RIL_REQUEST_SIM_CLOSE_CHANNEL 116 4084 4085 /** 4086 * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 4087 * 4088 * Exchange APDUs with a UICC over a previously opened logical channel. This 4089 * command reflects TS 27.007 "generic logical channel access" operation 4090 * (+CGLA). The modem should filter channel management and SELECT by DF name 4091 * commands. 4092 * 4093 * "data" is a const RIL_SIM_APDU* 4094 * 4095 * "response" is a const RIL_SIM_IO_Response * 4096 * 4097 * Valid errors: 4098 * SUCCESS 4099 * RADIO_NOT_AVAILABLE 4100 * GENERIC_FAILURE 4101 */ 4102 #define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117 4103 4104 /** 4105 * RIL_REQUEST_NV_READ_ITEM 4106 * 4107 * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. 4108 * This is used for device configuration by some CDMA operators. 4109 * 4110 * "data" is a const RIL_NV_ReadItem * 4111 * 4112 * "response" is const char * containing the contents of the NV item 4113 * 4114 * Valid errors: 4115 * SUCCESS 4116 * RADIO_NOT_AVAILABLE 4117 * GENERIC_FAILURE 4118 */ 4119 #define RIL_REQUEST_NV_READ_ITEM 118 4120 4121 /** 4122 * RIL_REQUEST_NV_WRITE_ITEM 4123 * 4124 * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. 4125 * This is used for device configuration by some CDMA operators. 4126 * 4127 * "data" is a const RIL_NV_WriteItem * 4128 * 4129 * "response" is NULL 4130 * 4131 * Valid errors: 4132 * SUCCESS 4133 * RADIO_NOT_AVAILABLE 4134 * GENERIC_FAILURE 4135 */ 4136 #define RIL_REQUEST_NV_WRITE_ITEM 119 4137 4138 /** 4139 * RIL_REQUEST_NV_WRITE_CDMA_PRL 4140 * 4141 * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. 4142 * This is used for device configuration by some CDMA operators. 4143 * 4144 * "data" is a const char * containing the PRL as a byte array 4145 * 4146 * "response" is NULL 4147 * 4148 * Valid errors: 4149 * SUCCESS 4150 * RADIO_NOT_AVAILABLE 4151 * GENERIC_FAILURE 4152 */ 4153 #define RIL_REQUEST_NV_WRITE_CDMA_PRL 120 4154 4155 /** 4156 * RIL_REQUEST_NV_RESET_CONFIG 4157 * 4158 * Reset the radio NV configuration to the factory state. 4159 * This is used for device configuration by some CDMA operators. 4160 * 4161 * "data" is int * 4162 * ((int *)data)[0] is 1 to reload all NV items 4163 * ((int *)data)[0] is 2 for erase NV reset (SCRTN) 4164 * ((int *)data)[0] is 3 for factory reset (RTN) 4165 * 4166 * "response" is NULL 4167 * 4168 * Valid errors: 4169 * SUCCESS 4170 * RADIO_NOT_AVAILABLE 4171 * GENERIC_FAILURE 4172 */ 4173 #define RIL_REQUEST_NV_RESET_CONFIG 121 4174 4175 /** RIL_REQUEST_SET_UICC_SUBSCRIPTION 4176 * FIXME This API needs to have more documentation. 4177 * 4178 * Selection/de-selection of a subscription from a SIM card 4179 * "data" is const RIL_SelectUiccSub* 4180 4181 * 4182 * "response" is NULL 4183 * 4184 * Valid errors: 4185 * SUCCESS 4186 * RADIO_NOT_AVAILABLE (radio resetting) 4187 * GENERIC_FAILURE 4188 * SUBSCRIPTION_NOT_SUPPORTED 4189 * 4190 */ 4191 #define RIL_REQUEST_SET_UICC_SUBSCRIPTION 122 4192 4193 /** 4194 * RIL_REQUEST_ALLOW_DATA 4195 * 4196 * Tells the modem whether data calls are allowed or not 4197 * 4198 * "data" is int * 4199 * FIXME slotId and aid will be added. 4200 * ((int *)data)[0] is == 0 to allow data calls 4201 * ((int *)data)[0] is == 1 to disallow data calls 4202 * 4203 * "response" is NULL 4204 * 4205 * Valid errors: 4206 * 4207 * SUCCESS 4208 * RADIO_NOT_AVAILABLE (radio resetting) 4209 * GENERIC_FAILURE 4210 * 4211 */ 4212 #define RIL_REQUEST_ALLOW_DATA 123 4213 4214 /** 4215 * RIL_REQUEST_GET_HARDWARE_CONFIG 4216 * 4217 * Request all of the current hardware (modem and sim) associated 4218 * with the RIL. 4219 * 4220 * "data" is NULL 4221 * 4222 * "response" is an array of RIL_HardwareConfig. 4223 */ 4224 #define RIL_REQUEST_GET_HARDWARE_CONFIG 124 4225 4226 /** 4227 * RIL_REQUEST_SIM_AUTHENTICATION 4228 * 4229 * Returns the response of SIM Authentication through RIL to a 4230 * challenge request. 4231 * 4232 * "data" Base64 encoded string containing challenge: 4233 * int authContext; P2 value of authentication command, see P2 parameter in 4234 * 3GPP TS 31.102 7.1.2 4235 * char *authData; the challenge string in Base64 format, see 3GPP 4236 * TS 31.102 7.1.2 4237 * char *aid; AID value, See ETSI 102.221 8.1 and 101.220 4, 4238 * NULL if no value 4239 * 4240 * "response" Base64 encoded strings containing response: 4241 * int sw1; Status bytes per 3GPP TS 31.102 section 7.3 4242 * int sw2; 4243 * char *simResponse; Response in Base64 format, see 3GPP TS 31.102 7.1.2 4244 */ 4245 #define RIL_REQUEST_SIM_AUTHENTICATION 125 4246 4247 /** 4248 * RIL_REQUEST_GET_DC_RT_INFO 4249 * 4250 * Requests the Data Connection Real Time Info 4251 * 4252 * "data" is NULL 4253 * 4254 * "response" is the most recent RIL_DcRtInfo 4255 * 4256 * Valid errors: 4257 * SUCCESS 4258 * RADIO_NOT_AVAILABLE 4259 * GENERIC_FAILURE 4260 * 4261 * See also: RIL_UNSOL_DC_RT_INFO_CHANGED 4262 */ 4263 #define RIL_REQUEST_GET_DC_RT_INFO 126 4264 4265 /** 4266 * RIL_REQUEST_SET_DC_RT_INFO_RATE 4267 * 4268 * This is the minimum number of milliseconds between successive 4269 * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate 4270 * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of 4271 * 0 means send as fast as possible. 4272 * 4273 * "data" The number of milliseconds as an int 4274 * 4275 * "response" is null 4276 * 4277 * Valid errors: 4278 * SUCCESS must not fail 4279 */ 4280 #define RIL_REQUEST_SET_DC_RT_INFO_RATE 127 4281 4282 /** 4283 * RIL_REQUEST_SET_DATA_PROFILE 4284 * 4285 * Set data profile in modem 4286 * Modem should erase existed profiles from framework, and apply new profiles 4287 * "data" is an const RIL_DataProfileInfo ** 4288 * "datalen" is count * sizeof(const RIL_DataProfileInfo *) 4289 * "response" is NULL 4290 * 4291 * Valid errors: 4292 * SUCCESS 4293 * RADIO_NOT_AVAILABLE (radio resetting) 4294 * GENERIC_FAILURE 4295 * SUBSCRIPTION_NOT_AVAILABLE 4296 */ 4297 #define RIL_REQUEST_SET_DATA_PROFILE 128 4298 4299 /** 4300 * RIL_REQUEST_SHUTDOWN 4301 * 4302 * Device is shutting down. All further commands are ignored 4303 * and RADIO_NOT_AVAILABLE must be returned. 4304 * 4305 * "data" is null 4306 * "response" is NULL 4307 * 4308 * Valid errors: 4309 * SUCCESS 4310 * RADIO_NOT_AVAILABLE 4311 * GENERIC_FAILURE 4312 */ 4313 #define RIL_REQUEST_SHUTDOWN 129 4314 4315 /** 4316 * RIL_REQUEST_GET_RADIO_CAPABILITY 4317 * 4318 * Used to get phone radio capablility. 4319 * 4320 * "data" is int * 4321 * ((int *)data)[0] is the phone radio access family defined in 4322 * RadioAccessFamily. It's a bit mask value to represent the support type. 4323 * 4324 * Valid errors: 4325 * SUCCESS 4326 * RADIO_NOT_AVAILABLE 4327 * GENERIC_FAILURE 4328 */ 4329 #define RIL_REQUEST_GET_RADIO_CAPABILITY 130 4330 4331 /** 4332 * RIL_REQUEST_SET_RADIO_CAPABILITY 4333 * 4334 * Used to set the phones radio capability. Be VERY careful 4335 * using this request as it may cause some vendor modems to reset. Because 4336 * of the possible modem reset any RIL commands after this one may not be 4337 * processed. 4338 * 4339 * "data" is the RIL_RadioCapability structure 4340 * 4341 * "response" is the RIL_RadioCapability structure, used to feedback return status 4342 * 4343 * Valid errors: 4344 * SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds. 4345 * RADIO_NOT_AVAILABLE 4346 * GENERIC_FAILURE 4347 */ 4348 #define RIL_REQUEST_SET_RADIO_CAPABILITY 131 4349 4350 4351 /***********************************************************************/ 4352 4353 4354 #define RIL_UNSOL_RESPONSE_BASE 1000 4355 4356 /** 4357 * RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED 4358 * 4359 * Indicate when value of RIL_RadioState has changed. 4360 * 4361 * Callee will invoke RIL_RadioStateRequest method on main thread 4362 * 4363 * "data" is NULL 4364 */ 4365 4366 #define RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED 1000 4367 4368 4369 /** 4370 * RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED 4371 * 4372 * Indicate when call state has changed 4373 * 4374 * Callee will invoke RIL_REQUEST_GET_CURRENT_CALLS on main thread 4375 * 4376 * "data" is NULL 4377 * 4378 * Response should be invoked on, for example, 4379 * "RING", "BUSY", "NO CARRIER", and also call state 4380 * transitions (DIALING->ALERTING ALERTING->ACTIVE) 4381 * 4382 * Redundent or extraneous invocations are tolerated 4383 */ 4384 #define RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED 1001 4385 4386 4387 /** 4388 * RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED 4389 * 4390 * Called when the voice network state changed 4391 * 4392 * Callee will invoke the following requests on main thread: 4393 * 4394 * RIL_REQUEST_VOICE_REGISTRATION_STATE 4395 * RIL_REQUEST_OPERATOR 4396 * 4397 * "data" is NULL 4398 * 4399 * FIXME should this happen when SIM records are loaded? (eg, for 4400 * EONS) 4401 */ 4402 #define RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED 1002 4403 4404 /** 4405 * RIL_UNSOL_RESPONSE_NEW_SMS 4406 * 4407 * Called when new SMS is received. 4408 * 4409 * "data" is const char * 4410 * This is a pointer to a string containing the PDU of an SMS-DELIVER 4411 * as an ascii string of hex digits. The PDU starts with the SMSC address 4412 * per TS 27.005 (+CMT:) 4413 * 4414 * Callee will subsequently confirm the receipt of thei SMS with a 4415 * RIL_REQUEST_SMS_ACKNOWLEDGE 4416 * 4417 * No new RIL_UNSOL_RESPONSE_NEW_SMS 4418 * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a 4419 * RIL_REQUEST_SMS_ACKNOWLEDGE has been received 4420 */ 4421 4422 #define RIL_UNSOL_RESPONSE_NEW_SMS 1003 4423 4424 /** 4425 * RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT 4426 * 4427 * Called when new SMS Status Report is received. 4428 * 4429 * "data" is const char * 4430 * This is a pointer to a string containing the PDU of an SMS-STATUS-REPORT 4431 * as an ascii string of hex digits. The PDU starts with the SMSC address 4432 * per TS 27.005 (+CDS:). 4433 * 4434 * Callee will subsequently confirm the receipt of the SMS with a 4435 * RIL_REQUEST_SMS_ACKNOWLEDGE 4436 * 4437 * No new RIL_UNSOL_RESPONSE_NEW_SMS 4438 * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a 4439 * RIL_REQUEST_SMS_ACKNOWLEDGE has been received 4440 */ 4441 4442 #define RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT 1004 4443 4444 /** 4445 * RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM 4446 * 4447 * Called when new SMS has been stored on SIM card 4448 * 4449 * "data" is const int * 4450 * ((const int *)data)[0] contains the slot index on the SIM that contains 4451 * the new message 4452 */ 4453 4454 #define RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM 1005 4455 4456 /** 4457 * RIL_UNSOL_ON_USSD 4458 * 4459 * Called when a new USSD message is received. 4460 * 4461 * "data" is const char ** 4462 * ((const char **)data)[0] points to a type code, which is 4463 * one of these string values: 4464 * "0" USSD-Notify -- text in ((const char **)data)[1] 4465 * "1" USSD-Request -- text in ((const char **)data)[1] 4466 * "2" Session terminated by network 4467 * "3" other local client (eg, SIM Toolkit) has responded 4468 * "4" Operation not supported 4469 * "5" Network timeout 4470 * 4471 * The USSD session is assumed to persist if the type code is "1", otherwise 4472 * the current session (if any) is assumed to have terminated. 4473 * 4474 * ((const char **)data)[1] points to a message string if applicable, which 4475 * should always be in UTF-8. 4476 */ 4477 #define RIL_UNSOL_ON_USSD 1006 4478 /* Previously #define RIL_UNSOL_ON_USSD_NOTIFY 1006 */ 4479 4480 /** 4481 * RIL_UNSOL_ON_USSD_REQUEST 4482 * 4483 * Obsolete. Send via RIL_UNSOL_ON_USSD 4484 */ 4485 #define RIL_UNSOL_ON_USSD_REQUEST 1007 4486 4487 /** 4488 * RIL_UNSOL_NITZ_TIME_RECEIVED 4489 * 4490 * Called when radio has received a NITZ time message 4491 * 4492 * "data" is const char * pointing to NITZ time string 4493 * in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt" 4494 */ 4495 #define RIL_UNSOL_NITZ_TIME_RECEIVED 1008 4496 4497 /** 4498 * RIL_UNSOL_SIGNAL_STRENGTH 4499 * 4500 * Radio may report signal strength rather han have it polled. 4501 * 4502 * "data" is a const RIL_SignalStrength * 4503 */ 4504 #define RIL_UNSOL_SIGNAL_STRENGTH 1009 4505 4506 4507 /** 4508 * RIL_UNSOL_DATA_CALL_LIST_CHANGED 4509 * 4510 * "data" is an array of RIL_Data_Call_Response_v6 identical to that 4511 * returned by RIL_REQUEST_DATA_CALL_LIST. It is the complete list 4512 * of current data contexts including new contexts that have been 4513 * activated. A data call is only removed from this list when the 4514 * framework sends a RIL_REQUEST_DEACTIVATE_DATA_CALL or the radio 4515 * is powered off/on. 4516 * 4517 * See also: RIL_REQUEST_DATA_CALL_LIST 4518 */ 4519 4520 #define RIL_UNSOL_DATA_CALL_LIST_CHANGED 1010 4521 4522 /** 4523 * RIL_UNSOL_SUPP_SVC_NOTIFICATION 4524 * 4525 * Reports supplementary service related notification from the network. 4526 * 4527 * "data" is a const RIL_SuppSvcNotification * 4528 * 4529 */ 4530 4531 #define RIL_UNSOL_SUPP_SVC_NOTIFICATION 1011 4532 4533 /** 4534 * RIL_UNSOL_STK_SESSION_END 4535 * 4536 * Indicate when STK session is terminated by SIM. 4537 * 4538 * "data" is NULL 4539 */ 4540 #define RIL_UNSOL_STK_SESSION_END 1012 4541 4542 /** 4543 * RIL_UNSOL_STK_PROACTIVE_COMMAND 4544 * 4545 * Indicate when SIM issue a STK proactive command to applications 4546 * 4547 * "data" is a const char * containing SAT/USAT proactive command 4548 * in hexadecimal format string starting with command tag 4549 * 4550 */ 4551 #define RIL_UNSOL_STK_PROACTIVE_COMMAND 1013 4552 4553 /** 4554 * RIL_UNSOL_STK_EVENT_NOTIFY 4555 * 4556 * Indicate when SIM notifies applcations some event happens. 4557 * Generally, application does not need to have any feedback to 4558 * SIM but shall be able to indicate appropriate messages to users. 4559 * 4560 * "data" is a const char * containing SAT/USAT commands or responses 4561 * sent by ME to SIM or commands handled by ME, in hexadecimal format string 4562 * starting with first byte of response data or command tag 4563 * 4564 */ 4565 #define RIL_UNSOL_STK_EVENT_NOTIFY 1014 4566 4567 /** 4568 * RIL_UNSOL_STK_CALL_SETUP 4569 * 4570 * Indicate when SIM wants application to setup a voice call. 4571 * 4572 * "data" is const int * 4573 * ((const int *)data)[0] contains timeout value (in milliseconds) 4574 */ 4575 #define RIL_UNSOL_STK_CALL_SETUP 1015 4576 4577 /** 4578 * RIL_UNSOL_SIM_SMS_STORAGE_FULL 4579 * 4580 * Indicates that SMS storage on the SIM is full. Sent when the network 4581 * attempts to deliver a new SMS message. Messages cannot be saved on the 4582 * SIM until space is freed. In particular, incoming Class 2 messages 4583 * cannot be stored. 4584 * 4585 * "data" is null 4586 * 4587 */ 4588 #define RIL_UNSOL_SIM_SMS_STORAGE_FULL 1016 4589 4590 /** 4591 * RIL_UNSOL_SIM_REFRESH 4592 * 4593 * Indicates that file(s) on the SIM have been updated, or the SIM 4594 * has been reinitialized. 4595 * 4596 * In the case where RIL is version 6 or older: 4597 * "data" is an int * 4598 * ((int *)data)[0] is a RIL_SimRefreshResult. 4599 * ((int *)data)[1] is the EFID of the updated file if the result is 4600 * SIM_FILE_UPDATE or NULL for any other result. 4601 * 4602 * In the case where RIL is version 7: 4603 * "data" is a RIL_SimRefreshResponse_v7 * 4604 * 4605 * Note: If the SIM state changes as a result of the SIM refresh (eg, 4606 * SIM_READY -> SIM_LOCKED_OR_ABSENT), RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 4607 * should be sent. 4608 */ 4609 #define RIL_UNSOL_SIM_REFRESH 1017 4610 4611 /** 4612 * RIL_UNSOL_CALL_RING 4613 * 4614 * Ring indication for an incoming call (eg, RING or CRING event). 4615 * There must be at least one RIL_UNSOL_CALL_RING at the beginning 4616 * of a call and sending multiple is optional. If the system property 4617 * ro.telephony.call_ring.multiple is false then the upper layers 4618 * will generate the multiple events internally. Otherwise the vendor 4619 * ril must generate multiple RIL_UNSOL_CALL_RING if 4620 * ro.telephony.call_ring.multiple is true or if it is absent. 4621 * 4622 * The rate of these events is controlled by ro.telephony.call_ring.delay 4623 * and has a default value of 3000 (3 seconds) if absent. 4624 * 4625 * "data" is null for GSM 4626 * "data" is const RIL_CDMA_SignalInfoRecord * if CDMA 4627 */ 4628 #define RIL_UNSOL_CALL_RING 1018 4629 4630 /** 4631 * RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 4632 * 4633 * Indicates that SIM state changes. 4634 * 4635 * Callee will invoke RIL_REQUEST_GET_SIM_STATUS on main thread 4636 4637 * "data" is null 4638 */ 4639 #define RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 1019 4640 4641 /** 4642 * RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 4643 * 4644 * Called when new CDMA SMS is received 4645 * 4646 * "data" is const RIL_CDMA_SMS_Message * 4647 * 4648 * Callee will subsequently confirm the receipt of the SMS with 4649 * a RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 4650 * 4651 * No new RIL_UNSOL_RESPONSE_CDMA_NEW_SMS should be sent until 4652 * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE has been received 4653 * 4654 */ 4655 #define RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 1020 4656 4657 /** 4658 * RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS 4659 * 4660 * Called when new Broadcast SMS is received 4661 * 4662 * "data" can be one of the following: 4663 * If received from GSM network, "data" is const char of 88 bytes 4664 * which indicates each page of a CBS Message sent to the MS by the 4665 * BTS as coded in 3GPP 23.041 Section 9.4.1.2. 4666 * If received from UMTS network, "data" is const char of 90 up to 1252 4667 * bytes which contain between 1 and 15 CBS Message pages sent as one 4668 * packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2. 4669 * 4670 */ 4671 #define RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS 1021 4672 4673 /** 4674 * RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL 4675 * 4676 * Indicates that SMS storage on the RUIM is full. Messages 4677 * cannot be saved on the RUIM until space is freed. 4678 * 4679 * "data" is null 4680 * 4681 */ 4682 #define RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL 1022 4683 4684 /** 4685 * RIL_UNSOL_RESTRICTED_STATE_CHANGED 4686 * 4687 * Indicates a restricted state change (eg, for Domain Specific Access Control). 4688 * 4689 * Radio need send this msg after radio off/on cycle no matter it is changed or not. 4690 * 4691 * "data" is an int * 4692 * ((int *)data)[0] contains a bitmask of RIL_RESTRICTED_STATE_* values. 4693 */ 4694 #define RIL_UNSOL_RESTRICTED_STATE_CHANGED 1023 4695 4696 /** 4697 * RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE 4698 * 4699 * Indicates that the radio system selection module has 4700 * autonomously entered emergency callback mode. 4701 * 4702 * "data" is null 4703 * 4704 */ 4705 #define RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE 1024 4706 4707 /** 4708 * RIL_UNSOL_CDMA_CALL_WAITING 4709 * 4710 * Called when CDMA radio receives a call waiting indication. 4711 * 4712 * "data" is const RIL_CDMA_CallWaiting * 4713 * 4714 */ 4715 #define RIL_UNSOL_CDMA_CALL_WAITING 1025 4716 4717 /** 4718 * RIL_UNSOL_CDMA_OTA_PROVISION_STATUS 4719 * 4720 * Called when CDMA radio receives an update of the progress of an 4721 * OTASP/OTAPA call. 4722 * 4723 * "data" is const int * 4724 * For CDMA this is an integer OTASP/OTAPA status listed in 4725 * RIL_CDMA_OTA_ProvisionStatus. 4726 * 4727 */ 4728 #define RIL_UNSOL_CDMA_OTA_PROVISION_STATUS 1026 4729 4730 /** 4731 * RIL_UNSOL_CDMA_INFO_REC 4732 * 4733 * Called when CDMA radio receives one or more info recs. 4734 * 4735 * "data" is const RIL_CDMA_InformationRecords * 4736 * 4737 */ 4738 #define RIL_UNSOL_CDMA_INFO_REC 1027 4739 4740 /** 4741 * RIL_UNSOL_OEM_HOOK_RAW 4742 * 4743 * This is for OEM specific use. 4744 * 4745 * "data" is a byte[] 4746 */ 4747 #define RIL_UNSOL_OEM_HOOK_RAW 1028 4748 4749 /** 4750 * RIL_UNSOL_RINGBACK_TONE 4751 * 4752 * Indicates that nework doesn't have in-band information, need to 4753 * play out-band tone. 4754 * 4755 * "data" is an int * 4756 * ((int *)data)[0] == 0 for stop play ringback tone. 4757 * ((int *)data)[0] == 1 for start play ringback tone. 4758 */ 4759 #define RIL_UNSOL_RINGBACK_TONE 1029 4760 4761 /** 4762 * RIL_UNSOL_RESEND_INCALL_MUTE 4763 * 4764 * Indicates that framework/application need reset the uplink mute state. 4765 * 4766 * There may be situations where the mute state becomes out of sync 4767 * between the application and device in some GSM infrastructures. 4768 * 4769 * "data" is null 4770 */ 4771 #define RIL_UNSOL_RESEND_INCALL_MUTE 1030 4772 4773 /** 4774 * RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED 4775 * 4776 * Called when CDMA subscription source changed. 4777 * 4778 * "data" is int * 4779 * ((int *)data)[0] is == RIL_CdmaSubscriptionSource 4780 */ 4781 #define RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED 1031 4782 4783 /** 4784 * RIL_UNSOL_CDMA_PRL_CHANGED 4785 * 4786 * Called when PRL (preferred roaming list) changes. 4787 * 4788 * "data" is int * 4789 * ((int *)data)[0] is PRL_VERSION as would be returned by RIL_REQUEST_CDMA_SUBSCRIPTION 4790 */ 4791 #define RIL_UNSOL_CDMA_PRL_CHANGED 1032 4792 4793 /** 4794 * RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE 4795 * 4796 * Called when Emergency Callback Mode Ends 4797 * 4798 * Indicates that the radio system selection module has 4799 * proactively exited emergency callback mode. 4800 * 4801 * "data" is NULL 4802 * 4803 */ 4804 #define RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE 1033 4805 4806 /** 4807 * RIL_UNSOL_RIL_CONNECTED 4808 * 4809 * Called the ril connects and returns the version 4810 * 4811 * "data" is int * 4812 * ((int *)data)[0] is RIL_VERSION 4813 */ 4814 #define RIL_UNSOL_RIL_CONNECTED 1034 4815 4816 /** 4817 * RIL_UNSOL_VOICE_RADIO_TECH_CHANGED 4818 * 4819 * Indicates that voice technology has changed. Contains new radio technology 4820 * as a data in the message. 4821 * 4822 * "data" is int * 4823 * ((int *)data)[0] is of type const RIL_RadioTechnology 4824 * 4825 */ 4826 #define RIL_UNSOL_VOICE_RADIO_TECH_CHANGED 1035 4827 4828 /** 4829 * RIL_UNSOL_CELL_INFO_LIST 4830 * 4831 * Same information as returned by RIL_REQUEST_GET_CELL_INFO_LIST, but returned 4832 * at the rate no greater than specified by RIL_REQUEST_SET_UNSOL_CELL_INFO_RATE. 4833 * 4834 * "data" is NULL 4835 * 4836 * "response" is an array of RIL_CellInfo. 4837 */ 4838 #define RIL_UNSOL_CELL_INFO_LIST 1036 4839 4840 /** 4841 * RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 4842 * 4843 * Called when IMS registration state has changed 4844 * 4845 * To get IMS registration state and IMS SMS format, callee needs to invoke the 4846 * following request on main thread: 4847 * 4848 * RIL_REQUEST_IMS_REGISTRATION_STATE 4849 * 4850 * "data" is NULL 4851 * 4852 */ 4853 #define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037 4854 4855 /** 4856 * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 4857 * 4858 * Indicated when there is a change in subscription status. 4859 * This event will be sent in the following scenarios 4860 * - subscription readiness at modem, which was selected by telephony layer 4861 * - when subscription is deactivated by modem due to UICC card removal 4862 * - When network invalidates the subscription i.e. attach reject due to authentication reject 4863 * 4864 * "data" is const int * 4865 * ((const int *)data)[0] == 0 for Subscription Deactivated 4866 * ((const int *)data)[0] == 1 for Subscription Activated 4867 * 4868 */ 4869 #define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038 4870 4871 /** 4872 * RIL_UNSOL_SRVCC_STATE_NOTIFY 4873 * 4874 * Called when Single Radio Voice Call Continuity(SRVCC) 4875 * progress state has changed 4876 * 4877 * "data" is int * 4878 * ((int *)data)[0] is of type const RIL_SrvccState 4879 * 4880 */ 4881 4882 #define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039 4883 4884 /** 4885 * RIL_UNSOL_HARDWARE_CONFIG_CHANGED 4886 * 4887 * Called when the hardware configuration associated with the RILd changes 4888 * 4889 * "data" is an array of RIL_HardwareConfig 4890 * 4891 */ 4892 #define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040 4893 4894 /** 4895 * RIL_UNSOL_DC_RT_INFO_CHANGED 4896 * 4897 * Sent when the DC_RT_STATE changes but the time 4898 * between these messages must not be less than the 4899 * value set by RIL_REQUEST_SET_DC_RT_RATE. 4900 * 4901 * "data" is the most recent RIL_DcRtInfo 4902 * 4903 */ 4904 #define RIL_UNSOL_DC_RT_INFO_CHANGED 1041 4905 4906 /** 4907 * RIL_UNSOL_RADIO_CAPABILITY 4908 * 4909 * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes. 4910 * Returns the phone radio capability exactly as 4911 * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the 4912 * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY. 4913 * 4914 * "data" is the RIL_RadioCapability structure 4915 */ 4916 #define RIL_UNSOL_RADIO_CAPABILITY 1042 4917 4918 /* 4919 * RIL_UNSOL_ON_SS 4920 * 4921 * Called when SS response is received when DIAL/USSD/SS is changed to SS by 4922 * call control. 4923 * 4924 * "data" is const RIL_StkCcUnsolSsResponse * 4925 * 4926 */ 4927 #define RIL_UNSOL_ON_SS 1043 4928 4929 /** 4930 * RIL_UNSOL_STK_CC_ALPHA_NOTIFY 4931 * 4932 * Called when there is an ALPHA from UICC during Call Control. 4933 * 4934 * "data" is const char * containing ALPHA string from UICC in UTF-8 format. 4935 * 4936 */ 4937 #define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044 4938 4939 /***********************************************************************/ 4940 4941 4942 #if defined(ANDROID_MULTI_SIM) 4943 /** 4944 * RIL_Request Function pointer 4945 * 4946 * @param request is one of RIL_REQUEST_* 4947 * @param data is pointer to data defined for that RIL_REQUEST_* 4948 * data is owned by caller, and should not be modified or freed by callee 4949 * @param t should be used in subsequent call to RIL_onResponse 4950 * @param datalen the length of data 4951 * 4952 */ 4953 typedef void (*RIL_RequestFunc) (int request, void *data, 4954 size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id); 4955 4956 /** 4957 * This function should return the current radio state synchronously 4958 */ 4959 typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id); 4960 4961 #else 4962 /* Backward compatible */ 4963 4964 /** 4965 * RIL_Request Function pointer 4966 * 4967 * @param request is one of RIL_REQUEST_* 4968 * @param data is pointer to data defined for that RIL_REQUEST_* 4969 * data is owned by caller, and should not be modified or freed by callee 4970 * @param t should be used in subsequent call to RIL_onResponse 4971 * @param datalen the length of data 4972 * 4973 */ 4974 typedef void (*RIL_RequestFunc) (int request, void *data, 4975 size_t datalen, RIL_Token t); 4976 4977 /** 4978 * This function should return the current radio state synchronously 4979 */ 4980 typedef RIL_RadioState (*RIL_RadioStateRequest)(); 4981 4982 #endif 4983 4984 4985 /** 4986 * This function returns "1" if the specified RIL_REQUEST code is 4987 * supported and 0 if it is not 4988 * 4989 * @param requestCode is one of RIL_REQUEST codes 4990 */ 4991 4992 typedef int (*RIL_Supports)(int requestCode); 4993 4994 /** 4995 * This function is called from a separate thread--not the 4996 * thread that calls RIL_RequestFunc--and indicates that a pending 4997 * request should be cancelled. 4998 * 4999 * On cancel, the callee should do its best to abandon the request and 5000 * call RIL_onRequestComplete with RIL_Errno CANCELLED at some later point. 5001 * 5002 * Subsequent calls to RIL_onRequestComplete for this request with 5003 * other results will be tolerated but ignored. (That is, it is valid 5004 * to ignore the cancellation request) 5005 * 5006 * RIL_Cancel calls should return immediately, and not wait for cancellation 5007 * 5008 * Please see ITU v.250 5.6.1 for how one might implement this on a TS 27.007 5009 * interface 5010 * 5011 * @param t token wants to be canceled 5012 */ 5013 5014 typedef void (*RIL_Cancel)(RIL_Token t); 5015 5016 typedef void (*RIL_TimedCallback) (void *param); 5017 5018 /** 5019 * Return a version string for your RIL implementation 5020 */ 5021 typedef const char * (*RIL_GetVersion) (void); 5022 5023 typedef struct { 5024 int version; /* set to RIL_VERSION */ 5025 RIL_RequestFunc onRequest; 5026 RIL_RadioStateRequest onStateRequest; 5027 RIL_Supports supports; 5028 RIL_Cancel onCancel; 5029 RIL_GetVersion getVersion; 5030 } RIL_RadioFunctions; 5031 5032 typedef struct { 5033 char *apn; 5034 char *protocol; 5035 int authtype; 5036 char *username; 5037 char *password; 5038 } RIL_InitialAttachApn; 5039 5040 typedef struct { 5041 int authContext; /* P2 value of authentication command, see P2 parameter in 5042 3GPP TS 31.102 7.1.2 */ 5043 char *authData; /* the challenge string in Base64 format, see 3GPP 5044 TS 31.102 7.1.2 */ 5045 char *aid; /* AID value, See ETSI 102.221 8.1 and 101.220 4, 5046 NULL if no value. */ 5047 } RIL_SimAuthentication; 5048 5049 #ifdef RIL_SHLIB 5050 struct RIL_Env { 5051 /** 5052 * "t" is parameter passed in on previous call to RIL_Notification 5053 * routine. 5054 * 5055 * If "e" != SUCCESS, then response can be null/is ignored 5056 * 5057 * "response" is owned by caller, and should not be modified or 5058 * freed by callee 5059 * 5060 * RIL_onRequestComplete will return as soon as possible 5061 */ 5062 void (*OnRequestComplete)(RIL_Token t, RIL_Errno e, 5063 void *response, size_t responselen); 5064 5065 #if defined(ANDROID_MULTI_SIM) 5066 /** 5067 * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* 5068 * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* 5069 * 5070 * "data" is owned by caller, and should not be modified or freed by callee 5071 */ 5072 void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id); 5073 #else 5074 /** 5075 * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* 5076 * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* 5077 * 5078 * "data" is owned by caller, and should not be modified or freed by callee 5079 */ 5080 void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen); 5081 #endif 5082 /** 5083 * Call user-specifed "callback" function on on the same thread that 5084 * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies 5085 * a relative time value at which the callback is invoked. If relativeTime is 5086 * NULL or points to a 0-filled structure, the callback will be invoked as 5087 * soon as possible 5088 */ 5089 5090 void (*RequestTimedCallback) (RIL_TimedCallback callback, 5091 void *param, const struct timeval *relativeTime); 5092 }; 5093 5094 5095 /** 5096 * RIL implementations must defined RIL_Init 5097 * argc and argv will be command line arguments intended for the RIL implementation 5098 * Return NULL on error 5099 * 5100 * @param env is environment point defined as RIL_Env 5101 * @param argc number of arguments 5102 * @param argv list fo arguments 5103 * 5104 */ 5105 const RIL_RadioFunctions *RIL_Init(const struct RIL_Env *env, int argc, char **argv); 5106 5107 #else /* RIL_SHLIB */ 5108 5109 /** 5110 * Call this once at startup to register notification routine 5111 * 5112 * @param callbacks user-specifed callback function 5113 */ 5114 void RIL_register (const RIL_RadioFunctions *callbacks); 5115 5116 5117 /** 5118 * 5119 * RIL_onRequestComplete will return as soon as possible 5120 * 5121 * @param t is parameter passed in on previous call to RIL_Notification 5122 * routine. 5123 * @param e error code 5124 * if "e" != SUCCESS, then response can be null/is ignored 5125 * @param response is owned by caller, and should not be modified or 5126 * freed by callee 5127 * @param responselen the length of response in byte 5128 */ 5129 void RIL_onRequestComplete(RIL_Token t, RIL_Errno e, 5130 void *response, size_t responselen); 5131 5132 #if defined(ANDROID_MULTI_SIM) 5133 /** 5134 * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* 5135 * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* 5136 * "data" is owned by caller, and should not be modified or freed by callee 5137 * @param datalen the length of data in byte 5138 */ 5139 5140 void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, 5141 size_t datalen, RIL_SOCKET_ID socket_id); 5142 #else 5143 /** 5144 * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* 5145 * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* 5146 * "data" is owned by caller, and should not be modified or freed by callee 5147 * @param datalen the length of data in byte 5148 */ 5149 5150 void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, 5151 size_t datalen); 5152 #endif 5153 5154 /** 5155 * Call user-specifed "callback" function on on the same thread that 5156 * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies 5157 * a relative time value at which the callback is invoked. If relativeTime is 5158 * NULL or points to a 0-filled structure, the callback will be invoked as 5159 * soon as possible 5160 * 5161 * @param callback user-specifed callback function 5162 * @param param parameter list 5163 * @param relativeTime a relative time value at which the callback is invoked 5164 */ 5165 5166 void RIL_requestTimedCallback (RIL_TimedCallback callback, 5167 void *param, const struct timeval *relativeTime); 5168 5169 5170 #endif /* RIL_SHLIB */ 5171 5172 #ifdef __cplusplus 5173 } 5174 #endif 5175 5176 #endif /*ANDROID_RIL_H*/ 5177
