1 /****************************************************************************** 2 * 3 * Copyright (C) 2002-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This is the interface file for the bte application task 22 * 23 ******************************************************************************/ 24 25 #ifndef BTE_APPL_H 26 #define BTE_APPL_H 27 28 #include "btm_int.h" 29 #include "bta_api.h" 30 #include "bta_sys.h" 31 #include "bte.h" 32 33 /* Maximum length for serial port device name */ 34 #ifndef BTE_APPL_MAX_USERIAL_DEV_NAME 35 #define BTE_APPL_MAX_USERIAL_DEV_NAME (256) 36 #endif 37 #ifndef BTAPP_AHF_API_SUPPORT 38 #define BTAPP_AHF_API_SUPPORT FALSE 39 #endif 40 41 /* BTA APP_IDs */ 42 #define UI_DM_ID 1 43 #define UI_PRM_ID 20 44 /* this defines the enabled BTA modules. client may not be defined as those are enabled at run time. 45 * they are defined for completeness. please check with bta_sys.h for new modules. 46 * BTA_ID_DM serves as flag for BTA_EnableBluetooth() 47 * BTA_ID_RES can be used to fs ID in bte_appl. 48 */ 49 50 #define BTAPP_NUM_ID_BLOCKS ((BTA_ID_MAX/32)+1) /* number of 32 bit required to store one bit per 51 btapp id */ 52 53 #define BTAPP_APPL_MAIL_EVENT(x) (x<<8) /* define bte_appl task mail box event. LSB contains 54 BTA_ID_xxx (see bta_sys.h) */ 55 #define BTAPP_APPL_MAIL_EVT 0xff00 /* high byte contains bitmap of application module event */ 56 57 /* helper macro to copy BTA callack data y into message buffer x, for event data structure z */ 58 #define MEMCPY_APPL_MSG(x, y, z) memcpy( (void *)(((UINT8 *)x)+sizeof(BT_HDR)), (void *)y, sizeof(z) ) 59 60 /* Event masks for BTE_APPL_TASK */ 61 #define BTE_APPL_STARTUP_EVT EVENT_MASK(APPL_EVT_0) /* Bluetooth has started */ 62 #define BTE_APPL_SHUTDOWN_EVT EVENT_MASK(APPL_EVT_1) /* Bluetooth is shutting down */ 63 #define BTE_APPL_SOCKET_RX_EVT EVENT_MASK(APPL_EVT_2) /* Socket data ready to be read */ 64 #define BTE_APPL_DBUS_RX_EVT EVENT_MASK(APPL_EVT_3) /* DBUS message ready to be read */ 65 #define BTE_APPL_BTA_ENABLE_EVT EVENT_MASK(APPL_EVT_4) /* BTA Enabled event */ 66 67 68 /* Application configuration */ 69 #define BTE_APPL_PATCHRAM_PATH_MAXLEN 128 70 #define BTE_APPL_CONTACTS_DB_PATH 256 71 72 typedef struct { 73 #if ((BLE_INCLUDED == TRUE) && (SMP_INCLUDED == TRUE)) 74 UINT8 ble_auth_req; 75 UINT8 ble_io_cap; 76 UINT8 ble_init_key; 77 UINT8 ble_resp_key; 78 UINT8 ble_max_key_size; 79 #endif 80 } tBTE_APPL_CFG; 81 82 extern tBTE_APPL_CFG bte_appl_cfg; 83 84 typedef struct { 85 pthread_mutex_t mutex; /* mutex to protect below signal condition */ 86 pthread_cond_t cond; /* signal event */ 87 } tBTAPP_SEMAPHORE; 88 89 /* helper functions to handle pthread conditions event from outside GKI */ 90 extern void bte_create_semaphore( tBTAPP_SEMAPHORE * p_sema ); 91 extern void bte_wait_semaphore( tBTAPP_SEMAPHORE * p_sema, unsigned msecs_to ); 92 extern void bte_signal_semaphore( tBTAPP_SEMAPHORE * p_sema ); 93 extern void bte_destroy_semaphore( tBTAPP_SEMAPHORE * p_sema ); 94 95 /* global application control block storing global application states and variables */ 96 typedef struct tBTE_APPL_CB_tag { 97 sigset_t signal_handler_set; /* signal handler set used by signal handler thread */ 98 #if ( TRUE == BTE_RESET_BAUD_ON_BT_DISABLE ) 99 tBTAPP_SEMAPHORE shutdown_semaphore; /* used to sync with terminate handler initated ops */ 100 #endif 101 BOOLEAN amp_enabled; /* TRUE if AMP is in use */ 102 } tBTE_APPL_CB; 103 104 extern tBTE_APPL_CB bte_appl_cb; 105 106 /* Exports the application task */ 107 extern void BTE_appl_task(UINT32 params); 108 extern int BTAPP_enable_bta( const UINT32 bta_module_state[BTAPP_NUM_ID_BLOCKS], int includingFM ); 109 extern int BTAPP_disable_bta( const UINT32 bta_module_state[BTAPP_NUM_ID_BLOCKS], int includingFM ); 110 111 extern UINT8 appl_trace_level; 112 #define BT_PCM_CLK_IDX 1 113 #ifndef BT_PCM_DEF_CLK 114 #define BT_PCM_DEF_CLK 4 /* defaults to 2048khz PCM clk */ 115 #endif 116 #define BT_PCM_SYNC_MS_ROLE_IDX 3 117 #define BT_PCM_CLK_MS_ROLE_IDX 4 118 #ifndef BT_PCM_DEF_ROLE 119 #define BT_PCM_DEF_ROLE 0x00 /* assume slave as default */ 120 #endif 121 122 /* helper macros to set, clear and get current BTA module id in a 32bit ARRAY!! */ 123 /* set bit id to 1 in UINT32 a[] NO RANGE CHECK!*/ 124 #define BTAPP_SET_BTA_MOD(id, a) { a[id/32] |= (UINT32)(1<<(id % 32)); } 125 126 /* set bit id to 0 (cleared) in UINT32 a[] NO RANGE CHECK */ 127 #define BTAPP_CLEAR_BTA_MOD(id, a) { a[id/32] &= (UINT32)!(1<<(id % 32)); } 128 129 /* tests if bit id is 1 in UINT32 a[] NO RANGE CHECK */ 130 #define BTAPP_BTA_MOD_IS_SET(id, a) (a[id/32] & (UINT32)(1<<(id % 32))) 131 132 /* update this list either via btld.txt or directly here by adding the new profiles as per bta_sys.h. 133 * each xxx_LISTx may only contain 32 bits */ 134 #ifndef BTAPP_BTA_MODULES_LIST0 135 #define BTAPP_BTA_MODULES_LIST0 (\ 136 ( 1<<BTA_ID_DM ) | \ 137 ( 1<<BTA_ID_DG ) | \ 138 ( 1<<BTA_ID_AG ) | \ 139 ( 1<<BTA_ID_OPC )| \ 140 ( 1<<BTA_ID_OPS )| \ 141 ( 1<<BTA_ID_FTS )| \ 142 ( 1<<BTA_ID_PAN )| \ 143 ( 1<<BTA_ID_PR ) | \ 144 ( 1<<BTA_ID_SC) | \ 145 ( 1<<BTA_ID_AV ) | \ 146 ( 1<<BTA_ID_HH ) | \ 147 ( 1<<BTA_ID_PBS) | \ 148 ( 1<<BTA_ID_FMTX)| \ 149 ( 1<<BTA_ID_JV) | \ 150 ( 1<<BTA_ID_MSE) \ 151 ) 152 #endif 153 154 #define BTAPP_LIST1_BLOCK 32 /* next 32 bit block */ 155 #ifndef BTAPP_BTA_MODULES_LIST1 156 #define BTAPP_BTA_MODULES_LIST1 (\ 157 ( 1<<(BTA_ID_MAX-BTAPP_LIST1_BLOCK) ) | \ 158 ( 1<<(BTA_ID_MSE-BTAPP_LIST1_BLOCK) ) | \ 159 0 \ 160 ) 161 #endif 162 /* for future GPS etc support. goes int LIST1 above */ 163 #if 0 164 ( 1<<(BTA_ID_SSR-BTAPP_LIST1_BLOCK) ) \ 165 ( 1<<(BTA_ID_MSE-BTAPP_LIST1_BLOCK) ) \ 166 ( 1<<(BTA_ID_MCE-BTAPP_LIST1_BLOCK) ) 167 #endif 168 169 /* used application init default in bte_main.c, bte_appl_cfg */ 170 #ifndef BTAPP_DEFAULT_MODULES 171 #if (1==BTAPP_NUM_ID_BLOCKS) 172 #define BTAPP_DEFAULT_MODULES {BTAPP_BTA_MODULES_LIST0} /* max 32 modules IDs */ 173 #elif (2==BTAPP_NUM_ID_BLOCKS) 174 #define BTAPP_DEFAULT_MODULES {BTAPP_BTA_MODULES_LIST0, BTAPP_BTA_MODULES_LIST1} /* 64 module IDs max */ 175 #else 176 #error "Define more BTAPP_BTA_MODULES_LISTx" 177 #endif 178 #endif 179 180 #endif /* BTE_APPL_H */ 181
