Lines Matching full:session
37 .BR "ip l2tp add session"
67 .BR "ip l2tp del session"
80 .BR "ip l2tp show session"
111 fixed. L2TPv3 tunnels can carry data of more than one session. Each
112 session is identified by a session_id and its parent tunnel's
113 tunnel_id. A tunnel must be created before a session can be created in
128 When an L2TPv3 ethernet session is created, a virtual network
129 interface is created for the session, which must then be configured
141 interface of a given L2TP session is configured and enabled, data can
149 .B l2tp add session
162 sets the session network interface name. Default is l2tpethN.
208 .SS ip l2tp add session - add a new session to a tunnel
211 sets the session network interface name. Default is l2tpethN.
215 identifies the tunnel into which the session will be created. The
219 set the session id, which is a 32-bit integer value. Uniquely
220 identifies the session being created. The value used must match the
224 set the peer session id, which is a 32-bit integer value assigned to
225 the session by the peer. The value used must match the session_id
229 sets an optional cookie value to be assigned to the session. This is a
236 sets an optional peer cookie value to be assigned to the session. This
251 .SS ip l2tp del session - destroy a session
254 set the tunnel id in which the session to be deleted is located.
257 set the session id of the session to be deleted.
258 .SS ip l2tp show session - show information about sessions
261 set the tunnel id of the session(s) to be shown. If not specified,
265 set the session id of the session to be shown. If not specified,
274 site-A:# ip l2tp add session tunnel_id 3000 session_id 1000 \\
280 site-B:# ip l2tp add session tunnel_id 4000 session_id 2000 \\
288 Notice that the IP addresses, UDP ports and tunnel / session ids are
321 over a separate L2TP session. For example, to bridge VLAN ID 5 on eth1
