Lines Matching full:ipv4
145 #define help_netcat "usage: netcat [-tu] [-lL COMMAND...] [-wpq #] [-s addr] {IPADDR PORTNUM|-f FILENAME}\n\n-L listen for multiple incoming connections (server mode).\n-f use FILENAME (ala /dev/ttyS0) instead of network\n-l listen for one incoming connection.\n-p local port number\n-q SECONDS quit this many seconds after EOF on stdin.\n-s local ipv4 address\n-t allocate tty (must come before -l or -L)\n-w SECONDS timeout for connection\n\nUse \"stty 115200 -F /dev/ttyS0 && stty raw -echo -ctlecho\" with\nnetcat -f to connect to a serial port.\n\nThe command line after -l or -L is executed to handle each incoming\nconnection. If none, the connection is forwarded to stdin/stdout.\n\nFor a quick-and-dirty server, try something like:\nnetcat -s 127.0.0.1 -p 1234 -tL /bin/bash -l\n"
181 #define help_ifconfig "usage: ifconfig [-a] [INTERFACE [ACTION...]]\n\nDisplay or configure network interface.\n\nWith no arguments, display active interfaces. First argument is interface\nto operate on, one argument by itself displays that interface.\n\n-a Show all interfaces, not just active ones\n\nAdditional arguments are actions to perform on the interface:\n\nADDRESS[/NETMASK] - set IPv4 address (1.2.3.4/5)\ndefault - unset ipv4 address\nadd|del ADDRESS[/PREFIXLEN] - add/remove IPv6 address (1111::8888/128)\nup - enable interface\ndown - disable interface\n\nnetmask|broadcast|pointopoint ADDRESS - set more IPv4 characteristics\nhw ether|infiniband ADDRESS - set LAN hardware address (AA:BB:CC...)\ntxqueuelen LEN - number of buffered packets before output blocks\nmtu LEN - size of outgoing packets (Maximum Transmission Unit)\n\nFlags you can set on an interface (or -remove by prefixing with -):\narp - don't use Address Resolution Protocol to map LAN routes\npromisc - don't discard packets that aren't to this LAN hardware address\nmulticast - force interface into multicast mode if the driver doesn't\nallmulti - promisc for multicast packets\n\nObsolete fields included for historical purposes:\nirq|io_addr|mem_start ADDR - micromanage obsolete hardware\noutfill|keepalive INTEGER - SLIP analog dialup line quality monitoring\nmetric INTEGER - added to Linux 0.9.10 with comment \"never used\", still true\n\n"
235 #define help_traceroute "usage: traceroute [-46FUIldnvr] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n[-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE] [-z PAUSE_MSEC] HOST [BYTES]\n\ntraceroute6 [-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES][-s SRC_IP] [-t TOS] [-w WAIT_SEC]\n [-i IFACE] HOST [BYTES]\n\nTrace the route to HOST\n\n-4,-6 Force IP or IPv6 name resolution\n-F Set the don't fragment bit (supports IPV4 only)\n-U Use UDP datagrams instead of ICMP ECHO (supports IPV4 only)\n-I Use ICMP ECHO instead of UDP datagrams (supports IPV4 only)\n-l Display the TTL value of the returned packet (supports IPV4 only)\n-d Set SO_DEBUG options to socket\n-n Print numeric addresses\n-v verbose\n-r Bypass routing tables, send directly to HOST\n-m Max time-to-live (max number of hops)(RANGE 1 to 255)\n-p Base UDP port number used in probes(default 33434)(RANGE 1 to 65535)\n-q Number of probes per TTL (default 3)(RANGE 1 to 255)\n-s IP address to use as the source address\n-t Type-of-service in probe packets (default 0)(RANGE 0 to 255)\n-w Time in seconds to wait for a response (default 3)(RANGE 0 to 86400)\n-g Loose source route gateway (8 max) (supports IPV4IPV4 only)\n-f Start from the 1ST_TTL hop (instead from 1)(RANGE 1 to 255) (supports IPV4 only)\n-i Specify a network interface to operate with\n\n"
265 #define help_ping "usage: ping [OPTIONS] HOST\n\nCheck network connectivity by sending packets to a host and reporting\nits response.\n\nSend ICMP ECHO_REQUEST packets to ipv4 or ipv6 addresses and prints each\necho it receives back, with round trip time.\n\nOptions:\n-4, -6 Force IPv4 or IPv6\n-c CNT Send CNT many packets\n-I IFACE/IP Source interface or address\n-q Quiet, only displays output at start and when finished\n-s SIZE Packet SIZE in bytes (default 56)\n-t TTL Set Time (number of hops) To Live\n-W SEC Seconds to wait for response after all packets sent (default 10)\n-w SEC Exit after this many seconds\n\n"
311 #define help_host "usage: host [-av] [-t TYPE] NAME [SERVER]\n\nPerform DNS lookup on NAME, which can be a domain name to lookup,\nor an ipv4 dotted or ipv6 colon seprated address to reverse lookup.\nSERVER (if present) is the DNS server to use.\n\n-a no idea\n-t not a clue\n-v verbose\n\n"
