| /prebuilts/ndk/9/platforms/android-18/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-18/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-19/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-19/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-19/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-3/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-4/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-5/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-8/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-9/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-9/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /prebuilts/ndk/9/platforms/android-9/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1 (…)
[all...] |
| /system/bt/hci/include/ |
| vendor.h | 60 // Sends a vendor-specific command to the library.
63 // Sends an asynchronous vendor-specific command to the library.
66 // Registers a callback for an asynchronous vendor-specific command.
|
| /build/libs/host/include/host/ |
| CopyFile.h | 11 // command line options
|
| /build/tools/acp/ |
| README | 1 README for Android "acp" Command
3 The "cp" command was judged and found wanting. The issues are:
31 It's easier and more reliable to write a cp command that works properly.
34 The "acp" command takes most of the standard flags, following the GNU
|
| /development/ide/emacs/ |
| android-host.el | 46 (defvar android-host-command-map (make-sparse-keymap))
52 (define-key global-map (read-kbd-macro val) android-host-command-map)
55 (let ((map android-host-command-map))
71 (android-adb-command "remount"))
76 (android-adb-command "root"))
81 (android-adb-shell-command "reboot bootloader"))
90 (android-adb-command "sync" 'p))
111 (start-process-shell-command
115 (start-process-shell-command
|
| /development/samples/USB/AdbTest/ |
| README.txt | 2 Currently it only implements the "adb logcat" command and displays the log
|
| /development/testrunner/ |
| adb_interface.py | 18 """Provides an interface to communicate with the device via the adb command.
37 # argument to pass to adb, to direct command to specific device
55 """Send a command via adb.
58 command_string: adb command to run
59 timeout_time: number of seconds to wait for command to respond before
61 retry_count: number of times to retry command before raising
64 string output of command
67 WaitForResponseTimedOutError if device does not respond to command within time
75 """Send a adb shell command.
78 cmd: adb shell command to ru
[all...] |
| /development/tools/recovery_l10n/res/values-en-rAU/ |
| strings.xml | 6 <string name="recovery_no_command" msgid="1915703879031023455">"No command."</string>
|
| /development/tools/recovery_l10n/res/values-en-rGB/ |
| strings.xml | 6 <string name="recovery_no_command" msgid="1915703879031023455">"No command."</string>
|
| /development/tools/recovery_l10n/res/values-en-rIN/ |
| strings.xml | 6 <string name="recovery_no_command" msgid="1915703879031023455">"No command."</string>
|
| /development/tools/recovery_l10n/res/values-tl/ |
| strings.xml | 6 <string name="recovery_no_command" msgid="1915703879031023455">"Walang command."</string>
|
| /external/apache-harmony/jdwp/src/test/java/org/apache/harmony/jpda/tests/jdwp/Method/ |
| IsObsoleteTest.java | 38 * JDWP Unit test for Method.IsObsolete command.
42 * This testcase exercises Method.IsObsolete command.
44 * which is not obsolete, and checks it with Method.IsObsolete command.
75 checkReplyPacket(reply, "Method::IsObsolete command");
|
| /external/apache-harmony/jdwp/src/test/java/org/apache/harmony/jpda/tests/jdwp/ObjectReference/ |
| IsCollectedTest.java | 39 * JDWP Unit test for ObjectReference.IsCollected command.
43 static final String thisCommandName = "ObjectReference.IsCollected command";
52 * This test exercises ObjectReference.IsCollected command.
56 * ObjectReference.DisableCollection command. After that Debuggee tries to
81 .println("=> Send ReferenceType::GetValues command for received fieldIDs and get ObjectIDs to check...");
94 checkReplyPacket(getValuesReply, "ReferenceType::GetValues command");
130 .println("\n=> Send ObjectReference::DisableCollection command for checkedObject_01...");
141 "ObjectReference::DisableCollection command");
250 * This testcase exercises ObjectReference.IsCollected command.
258 CommandPacket command = new CommandPacket local
281 CommandPacket command = new CommandPacket( local
[all...] |
| /external/apache-harmony/jdwp/src/test/java/org/apache/harmony/jpda/tests/jdwp/ReferenceType/ |
| GetValues004Test.java | 38 * JDWP Unit test for ReferenceType.GetValues command for field from another class.
50 * This testcase exercises ReferenceType.GetValues command for field from another class.
52 * ReferenceType.GetValues command runs correctly for field declaring
53 * in some another class than passed to GetValues command ReferenceTypeID which is
59 logWriter.println("==> " + thisTestName + " for ReferenceType.GetValues command: START...");
111 ("\n=> CHECK ReferenceType::GetValues command for debuggeeRefTypeID, anotherClassCheckedFieldID...");
123 checkReplyPacket(getValuesReply, "ReferenceType::GetValues command", JDWPConstants.Error.INVALID_FIELDID);
129 ("## FAILURE: ReferenceType::GetValues command does NOT return expected error - INVALID_FIELDID");
143 fail("ReferenceType::GetValues command does NOT return expected error - INVALID_FIELDID");
|
