Lines Matching full:band
130 # with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this
132 # special value "any" can be used to indicate that any support band can be used.
168 # the commonly used 2.4 GHz band channels 1, 6, and 11 (which is the default
169 # behavior on 2.4 GHz band if no acs_chan_bias parameter is specified).
482 # Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
526 # to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz channel if
536 # Note: hw_mode=a is used to specify that 5 GHz band is used with VHT.
669 # which is channel 42 in 5G band
675 # which is channel 159 in 5G band
1344 # station that has been detected to be capable of operating on another band,
1358 # another band, e.g., to try to reduce likelihood of the station selecting a
1530 # WPS RF Bands (a = 5G, b = 2.4G, g = 2.4G, ag = dual band, ad = 60 GHz)
1531 # This value should be set according to RF band(s) supported by the AP if
1532 # hw_mode is not set. For dual band dual concurrent devices, this needs to be
