1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the L2CAP API definitions 22 * 23 ******************************************************************************/ 24 #ifndef L2C_API_H 25 #define L2C_API_H 26 27 #include <stdbool.h> 28 29 #include "bt_target.h" 30 #include "l2cdefs.h" 31 #include "hcidefs.h" 32 33 /***************************************************************************** 34 ** Constants 35 *****************************************************************************/ 36 37 /* Define the minimum offset that L2CAP needs in a buffer. This is made up of 38 ** HCI type(1), len(2), handle(2), L2CAP len(2) and CID(2) => 9 39 */ 40 #define L2CAP_MIN_OFFSET 13 /* plus control(2), SDU length(2) */ 41 42 #define L2CAP_LCC_SDU_LENGTH 2 43 #define L2CAP_LCC_OFFSET (L2CAP_MIN_OFFSET + L2CAP_LCC_SDU_LENGTH) /* plus SDU length(2) */ 44 45 /* ping result codes */ 46 #define L2CAP_PING_RESULT_OK 0 /* Ping reply received OK */ 47 #define L2CAP_PING_RESULT_NO_LINK 1 /* Link could not be setup */ 48 #define L2CAP_PING_RESULT_NO_RESP 2 /* Remote L2CAP did not reply */ 49 50 /* result code for L2CA_DataWrite() */ 51 #define L2CAP_DW_FAILED FALSE 52 #define L2CAP_DW_SUCCESS TRUE 53 #define L2CAP_DW_CONGESTED 2 54 55 /* Values for priority parameter to L2CA_SetAclPriority */ 56 #define L2CAP_PRIORITY_NORMAL 0 57 #define L2CAP_PRIORITY_HIGH 1 58 59 /* Values for priority parameter to L2CA_SetTxPriority */ 60 #define L2CAP_CHNL_PRIORITY_HIGH 0 61 #define L2CAP_CHNL_PRIORITY_MEDIUM 1 62 #define L2CAP_CHNL_PRIORITY_LOW 2 63 64 typedef UINT8 tL2CAP_CHNL_PRIORITY; 65 66 /* Values for Tx/Rx data rate parameter to L2CA_SetChnlDataRate */ 67 #define L2CAP_CHNL_DATA_RATE_HIGH 3 68 #define L2CAP_CHNL_DATA_RATE_MEDIUM 2 69 #define L2CAP_CHNL_DATA_RATE_LOW 1 70 #define L2CAP_CHNL_DATA_RATE_NO_TRAFFIC 0 71 72 typedef UINT8 tL2CAP_CHNL_DATA_RATE; 73 74 /* Data Packet Flags (bits 2-15 are reserved) */ 75 /* layer specific 14-15 bits are used for FCR SAR */ 76 #define L2CAP_FLUSHABLE_MASK 0x0003 77 #define L2CAP_FLUSHABLE_CH_BASED 0x0000 78 #define L2CAP_FLUSHABLE_PKT 0x0001 79 #define L2CAP_NON_FLUSHABLE_PKT 0x0002 80 81 82 /* L2CA_FlushChannel num_to_flush definitions */ 83 #define L2CAP_FLUSH_CHANS_ALL 0xffff 84 #define L2CAP_FLUSH_CHANS_GET 0x0000 85 86 87 /* special CID for Multi-AV for reporting congestion */ 88 #define L2CAP_MULTI_AV_CID 0 89 90 /* length of the HCI header block */ 91 /* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) */ 92 #define L2CAP_MULTI_AV_HCI_HDR_LEN 8 93 94 /* length of padding for 4 bytes align */ 95 #define L2CAP_MULTI_AV_PADDING_LEN 2 96 97 /* length of the HCI header block with padding for FCR */ 98 /* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) + padding(2) */ 99 #define L2CAP_MULTI_AV_HCI_HDR_LEN_WITH_PADDING 10 100 101 /* length of the L2CAP header block */ 102 /* HCI header(4) + L2CAP header(4) + padding(4) or control word(2) + FCS(2) */ 103 #define L2CAP_MULTI_AV_L2C_HDR_LEN 12 104 105 /* definition used for L2CA_SetDesireRole */ 106 #define L2CAP_ROLE_SLAVE HCI_ROLE_SLAVE 107 #define L2CAP_ROLE_MASTER HCI_ROLE_MASTER 108 #define L2CAP_ROLE_ALLOW_SWITCH 0x80 /* set this bit to allow switch at create conn */ 109 #define L2CAP_ROLE_DISALLOW_SWITCH 0x40 /* set this bit to disallow switch at create conn */ 110 #define L2CAP_ROLE_CHECK_SWITCH 0xC0 111 112 113 /* Values for 'allowed_modes' field passed in structure tL2CAP_ERTM_INFO 114 */ 115 #define L2CAP_FCR_CHAN_OPT_BASIC (1 << L2CAP_FCR_BASIC_MODE) 116 #define L2CAP_FCR_CHAN_OPT_ERTM (1 << L2CAP_FCR_ERTM_MODE) 117 #define L2CAP_FCR_CHAN_OPT_STREAM (1 << L2CAP_FCR_STREAM_MODE) 118 119 #define L2CAP_FCR_CHAN_OPT_ALL_MASK (L2CAP_FCR_CHAN_OPT_BASIC | L2CAP_FCR_CHAN_OPT_ERTM | L2CAP_FCR_CHAN_OPT_STREAM) 120 121 /* Validity check for PSM. PSM values must be odd. Also, all PSM values must 122 ** be assigned such that the least significant bit of the most sigificant 123 ** octet equals zero. 124 */ 125 #define L2C_INVALID_PSM(psm) (((psm) & 0x0101) != 0x0001) 126 #define L2C_IS_VALID_PSM(psm) (((psm) & 0x0101) == 0x0001) 127 #define L2C_IS_VALID_LE_PSM(psm) (((psm) > 0x0000) && ((psm) < 0x0100)) 128 129 /***************************************************************************** 130 ** Type Definitions 131 *****************************************************************************/ 132 133 typedef struct 134 { 135 #define L2CAP_FCR_BASIC_MODE 0x00 136 #define L2CAP_FCR_ERTM_MODE 0x03 137 #define L2CAP_FCR_STREAM_MODE 0x04 138 #define L2CAP_FCR_LE_COC_MODE 0x05 139 140 UINT8 mode; 141 142 UINT8 tx_win_sz; 143 UINT8 max_transmit; 144 UINT16 rtrans_tout; 145 UINT16 mon_tout; 146 UINT16 mps; 147 } tL2CAP_FCR_OPTS; 148 149 /* Define a structure to hold the configuration parameters. Since the 150 ** parameters are optional, for each parameter there is a boolean to 151 ** use to signify its presence or absence. 152 */ 153 typedef struct 154 { 155 UINT16 result; /* Only used in confirm messages */ 156 BOOLEAN mtu_present; 157 UINT16 mtu; 158 BOOLEAN qos_present; 159 FLOW_SPEC qos; 160 BOOLEAN flush_to_present; 161 UINT16 flush_to; 162 BOOLEAN fcr_present; 163 tL2CAP_FCR_OPTS fcr; 164 BOOLEAN fcs_present; /* Optionally bypasses FCS checks */ 165 UINT8 fcs; /* '0' if desire is to bypass FCS, otherwise '1' */ 166 BOOLEAN ext_flow_spec_present; 167 tHCI_EXT_FLOW_SPEC ext_flow_spec; 168 UINT16 flags; /* bit 0: 0-no continuation, 1-continuation */ 169 } tL2CAP_CFG_INFO; 170 171 /* Define a structure to hold the configuration parameter for LE L2CAP connection 172 ** oriented channels. 173 */ 174 typedef struct 175 { 176 UINT16 mtu; 177 UINT16 mps; 178 UINT16 credits; 179 } tL2CAP_LE_CFG_INFO; 180 181 /* L2CAP channel configured field bitmap */ 182 #define L2CAP_CH_CFG_MASK_MTU 0x0001 183 #define L2CAP_CH_CFG_MASK_QOS 0x0002 184 #define L2CAP_CH_CFG_MASK_FLUSH_TO 0x0004 185 #define L2CAP_CH_CFG_MASK_FCR 0x0008 186 #define L2CAP_CH_CFG_MASK_FCS 0x0010 187 #define L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC 0x0020 188 189 typedef UINT16 tL2CAP_CH_CFG_BITS; 190 191 /********************************* 192 ** Callback Functions Prototypes 193 **********************************/ 194 195 /* Connection indication callback prototype. Parameters are 196 ** BD Address of remote 197 ** Local CID assigned to the connection 198 ** PSM that the remote wants to connect to 199 ** Identifier that the remote sent 200 */ 201 typedef void (tL2CA_CONNECT_IND_CB) (BD_ADDR, UINT16, UINT16, UINT8); 202 203 204 /* Connection confirmation callback prototype. Parameters are 205 ** Local CID 206 ** Result - 0 = connected, non-zero means failure reason 207 */ 208 typedef void (tL2CA_CONNECT_CFM_CB) (UINT16, UINT16); 209 210 211 /* Connection pending callback prototype. Parameters are 212 ** Local CID 213 */ 214 typedef void (tL2CA_CONNECT_PND_CB) (UINT16); 215 216 217 /* Configuration indication callback prototype. Parameters are 218 ** Local CID assigned to the connection 219 ** Pointer to configuration info 220 */ 221 typedef void (tL2CA_CONFIG_IND_CB) (UINT16, tL2CAP_CFG_INFO *); 222 223 224 /* Configuration confirm callback prototype. Parameters are 225 ** Local CID assigned to the connection 226 ** Pointer to configuration info 227 */ 228 typedef void (tL2CA_CONFIG_CFM_CB) (UINT16, tL2CAP_CFG_INFO *); 229 230 231 /* Disconnect indication callback prototype. Parameters are 232 ** Local CID 233 ** Boolean whether upper layer should ack this 234 */ 235 typedef void (tL2CA_DISCONNECT_IND_CB) (UINT16, BOOLEAN); 236 237 238 /* Disconnect confirm callback prototype. Parameters are 239 ** Local CID 240 ** Result 241 */ 242 typedef void (tL2CA_DISCONNECT_CFM_CB) (UINT16, UINT16); 243 244 245 /* QOS Violation indication callback prototype. Parameters are 246 ** BD Address of violating device 247 */ 248 typedef void (tL2CA_QOS_VIOLATION_IND_CB) (BD_ADDR); 249 250 251 /* Data received indication callback prototype. Parameters are 252 ** Local CID 253 ** Address of buffer 254 */ 255 typedef void (tL2CA_DATA_IND_CB) (UINT16, BT_HDR *); 256 257 258 /* Echo response callback prototype. Note that this is not included in the 259 ** registration information, but is passed to L2CAP as part of the API to 260 ** actually send an echo request. Parameters are 261 ** Result 262 */ 263 typedef void (tL2CA_ECHO_RSP_CB) (UINT16); 264 265 266 /* Callback function prototype to pass broadcom specific echo response */ 267 /* to the upper layer */ 268 typedef void (tL2CA_ECHO_DATA_CB) (BD_ADDR, UINT16, UINT8 *); 269 270 271 /* Congestion status callback protype. This callback is optional. If 272 ** an application tries to send data when the transmit queue is full, 273 ** the data will anyways be dropped. The parameter is: 274 ** Local CID 275 ** TRUE if congested, FALSE if uncongested 276 */ 277 typedef void (tL2CA_CONGESTION_STATUS_CB) (UINT16, BOOLEAN); 278 279 /* Callback prototype for number of packets completed events. 280 ** This callback notifies the application when Number of Completed Packets 281 ** event has been received. 282 ** This callback is originally designed for 3DG devices. 283 ** The parameter is: 284 ** peer BD_ADDR 285 */ 286 typedef void (tL2CA_NOCP_CB) (BD_ADDR); 287 288 /* Transmit complete callback protype. This callback is optional. If 289 ** set, L2CAP will call it when packets are sent or flushed. If the 290 ** count is 0xFFFF, it means all packets are sent for that CID (eRTM 291 ** mode only). The parameters are: 292 ** Local CID 293 ** Number of SDUs sent or dropped 294 */ 295 typedef void (tL2CA_TX_COMPLETE_CB) (UINT16, UINT16); 296 297 /* Define the structure that applications use to register with 298 ** L2CAP. This structure includes callback functions. All functions 299 ** MUST be provided, with the exception of the "connect pending" 300 ** callback and "congestion status" callback. 301 */ 302 typedef struct 303 { 304 tL2CA_CONNECT_IND_CB *pL2CA_ConnectInd_Cb; 305 tL2CA_CONNECT_CFM_CB *pL2CA_ConnectCfm_Cb; 306 tL2CA_CONNECT_PND_CB *pL2CA_ConnectPnd_Cb; 307 tL2CA_CONFIG_IND_CB *pL2CA_ConfigInd_Cb; 308 tL2CA_CONFIG_CFM_CB *pL2CA_ConfigCfm_Cb; 309 tL2CA_DISCONNECT_IND_CB *pL2CA_DisconnectInd_Cb; 310 tL2CA_DISCONNECT_CFM_CB *pL2CA_DisconnectCfm_Cb; 311 tL2CA_QOS_VIOLATION_IND_CB *pL2CA_QoSViolationInd_Cb; 312 tL2CA_DATA_IND_CB *pL2CA_DataInd_Cb; 313 tL2CA_CONGESTION_STATUS_CB *pL2CA_CongestionStatus_Cb; 314 tL2CA_TX_COMPLETE_CB *pL2CA_TxComplete_Cb; 315 316 } tL2CAP_APPL_INFO; 317 318 /* Define the structure that applications use to create or accept 319 ** connections with enhanced retransmission mode. 320 */ 321 typedef struct 322 { 323 UINT8 preferred_mode; 324 UINT8 allowed_modes; 325 UINT16 user_rx_buf_size; 326 UINT16 user_tx_buf_size; 327 UINT16 fcr_rx_buf_size; 328 UINT16 fcr_tx_buf_size; 329 330 } tL2CAP_ERTM_INFO; 331 332 #define L2CA_REGISTER(a,b,c) L2CA_Register(a,(tL2CAP_APPL_INFO *)b) 333 #define L2CA_DEREGISTER(a) L2CA_Deregister(a) 334 #define L2CA_CONNECT_REQ(a,b,c) L2CA_ErtmConnectReq(a,b,c) 335 #define L2CA_CONNECT_RSP(a,b,c,d,e,f) L2CA_ErtmConnectRsp(a,b,c,d,e,f) 336 #define L2CA_CONFIG_REQ(a,b) L2CA_ConfigReq(a,b) 337 #define L2CA_CONFIG_RSP(a,b) L2CA_ConfigRsp(a,b) 338 #define L2CA_DISCONNECT_REQ(a) L2CA_DisconnectReq(a) 339 #define L2CA_DISCONNECT_RSP(a) L2CA_DisconnectRsp(a) 340 #define L2CA_DATA_WRITE(a, b) L2CA_DataWrite(a, b) 341 #define L2CA_REGISTER_COC(a,b,c) L2CA_RegisterLECoc(a,(tL2CAP_APPL_INFO *)b) 342 #define L2CA_DEREGISTER_COC(a) L2CA_DeregisterLECoc(a) 343 #define L2CA_CONNECT_COC_REQ(a,b,c) L2CA_ConnectLECocReq(a,b,c) 344 #define L2CA_CONNECT_COC_RSP(a,b,c,d,e,f) L2CA_ConnectLECocRsp(a,b,c,d,e,f) 345 #define L2CA_GET_PEER_COC_CONFIG(a, b) L2CA_GetPeerLECocConfig(a, b) 346 347 /***************************************************************************** 348 ** External Function Declarations 349 *****************************************************************************/ 350 #ifdef __cplusplus 351 extern "C" 352 { 353 #endif 354 355 /******************************************************************************* 356 ** 357 ** Function L2CA_Register 358 ** 359 ** Description Other layers call this function to register for L2CAP 360 ** services. 361 ** 362 ** Returns PSM to use or zero if error. Typically, the PSM returned 363 ** is the same as was passed in, but for an outgoing-only 364 ** connection to a dynamic PSM, a "virtual" PSM is returned 365 ** and should be used in the calls to L2CA_ConnectReq() and 366 ** BTM_SetSecurityLevel(). 367 ** 368 *******************************************************************************/ 369 extern UINT16 L2CA_Register (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info); 370 371 /******************************************************************************* 372 ** 373 ** Function L2CA_Deregister 374 ** 375 ** Description Other layers call this function to deregister for L2CAP 376 ** services. 377 ** 378 ** Returns void 379 ** 380 *******************************************************************************/ 381 extern void L2CA_Deregister (UINT16 psm); 382 383 /******************************************************************************* 384 ** 385 ** Function L2CA_AllocatePSM 386 ** 387 ** Description Other layers call this function to find an unused PSM for L2CAP 388 ** services. 389 ** 390 ** Returns PSM to use. 391 ** 392 *******************************************************************************/ 393 extern UINT16 L2CA_AllocatePSM(void); 394 395 /******************************************************************************* 396 ** 397 ** Function L2CA_ConnectReq 398 ** 399 ** Description Higher layers call this function to create an L2CAP connection. 400 ** Note that the connection is not established at this time, but 401 ** connection establishment gets started. The callback function 402 ** will be invoked when connection establishes or fails. 403 ** 404 ** Returns the CID of the connection, or 0 if it failed to start 405 ** 406 *******************************************************************************/ 407 extern UINT16 L2CA_ConnectReq (UINT16 psm, BD_ADDR p_bd_addr); 408 409 /******************************************************************************* 410 ** 411 ** Function L2CA_ConnectRsp 412 ** 413 ** Description Higher layers call this function to accept an incoming 414 ** L2CAP connection, for which they had gotten an connect 415 ** indication callback. 416 ** 417 ** Returns TRUE for success, FALSE for failure 418 ** 419 *******************************************************************************/ 420 extern BOOLEAN L2CA_ConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, 421 UINT16 result, UINT16 status); 422 423 /******************************************************************************* 424 ** 425 ** Function L2CA_ErtmConnectReq 426 ** 427 ** Description Higher layers call this function to create an L2CAP connection 428 ** that needs to use Enhanced Retransmission Mode. 429 ** Note that the connection is not established at this time, but 430 ** connection establishment gets started. The callback function 431 ** will be invoked when connection establishes or fails. 432 ** 433 ** Returns the CID of the connection, or 0 if it failed to start 434 ** 435 *******************************************************************************/ 436 extern UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr, 437 tL2CAP_ERTM_INFO *p_ertm_info); 438 439 /******************************************************************************* 440 ** 441 ** Function L2CA_RegisterLECoc 442 ** 443 ** Description Other layers call this function to register for L2CAP 444 ** Connection Oriented Channel. 445 ** 446 ** Returns PSM to use or zero if error. Typically, the PSM returned 447 ** is the same as was passed in, but for an outgoing-only 448 ** connection to a dynamic PSM, a "virtual" PSM is returned 449 ** and should be used in the calls to L2CA_ConnectLECocReq() 450 ** and BTM_SetSecurityLevel(). 451 ** 452 *******************************************************************************/ 453 extern UINT16 L2CA_RegisterLECoc (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info); 454 455 /******************************************************************************* 456 ** 457 ** Function L2CA_DeregisterLECoc 458 ** 459 ** Description Other layers call this function to deregister for L2CAP 460 ** Connection Oriented Channel. 461 ** 462 ** Returns void 463 ** 464 *******************************************************************************/ 465 extern void L2CA_DeregisterLECoc (UINT16 psm); 466 467 /******************************************************************************* 468 ** 469 ** Function L2CA_ConnectLECocReq 470 ** 471 ** Description Higher layers call this function to create an L2CAP LE COC. 472 ** Note that the connection is not established at this time, but 473 ** connection establishment gets started. The callback function 474 ** will be invoked when connection establishes or fails. 475 ** 476 ** Returns the CID of the connection, or 0 if it failed to start 477 ** 478 *******************************************************************************/ 479 extern UINT16 L2CA_ConnectLECocReq (UINT16 psm, BD_ADDR p_bd_addr, tL2CAP_LE_CFG_INFO *p_cfg); 480 481 /******************************************************************************* 482 ** 483 ** Function L2CA_ConnectLECocRsp 484 ** 485 ** Description Higher layers call this function to accept an incoming 486 ** L2CAP LE COC connection, for which they had gotten an connect 487 ** indication callback. 488 ** 489 ** Returns TRUE for success, FALSE for failure 490 ** 491 *******************************************************************************/ 492 extern BOOLEAN L2CA_ConnectLECocRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, UINT16 result, 493 UINT16 status, tL2CAP_LE_CFG_INFO *p_cfg); 494 495 /******************************************************************************* 496 ** 497 ** Function L2CA_GetPeerLECocConfig 498 ** 499 ** Description Get peers configuration for LE Connection Oriented Channel. 500 ** 501 ** Return value: TRUE if peer is connected 502 ** 503 *******************************************************************************/ 504 extern BOOLEAN L2CA_GetPeerLECocConfig (UINT16 lcid, tL2CAP_LE_CFG_INFO* peer_cfg); 505 506 // This function sets the callback routines for the L2CAP connection referred to by 507 // |local_cid|. The callback routines can only be modified for outgoing connections 508 // established by |L2CA_ConnectReq| or accepted incoming connections. |callbacks| 509 // must not be NULL. This function returns true if the callbacks could be updated, 510 // false if not (e.g. |local_cid| was not found). 511 bool L2CA_SetConnectionCallbacks(uint16_t local_cid, const tL2CAP_APPL_INFO *callbacks); 512 513 /******************************************************************************* 514 ** 515 ** Function L2CA_ErtmConnectRsp 516 ** 517 ** Description Higher layers call this function to accept an incoming 518 ** L2CAP connection, for which they had gotten an connect 519 ** indication callback, and for which the higher layer wants 520 ** to use Enhanced Retransmission Mode. 521 ** 522 ** Returns TRUE for success, FALSE for failure 523 ** 524 *******************************************************************************/ 525 extern BOOLEAN L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, 526 UINT16 result, UINT16 status, 527 tL2CAP_ERTM_INFO *p_ertm_info); 528 529 /******************************************************************************* 530 ** 531 ** Function L2CA_ConfigReq 532 ** 533 ** Description Higher layers call this function to send configuration. 534 ** 535 ** Returns TRUE if configuration sent, else FALSE 536 ** 537 *******************************************************************************/ 538 extern BOOLEAN L2CA_ConfigReq (UINT16 cid, tL2CAP_CFG_INFO *p_cfg); 539 540 /******************************************************************************* 541 ** 542 ** Function L2CA_ConfigRsp 543 ** 544 ** Description Higher layers call this function to send a configuration 545 ** response. 546 ** 547 ** Returns TRUE if configuration response sent, else FALSE 548 ** 549 *******************************************************************************/ 550 extern BOOLEAN L2CA_ConfigRsp (UINT16 cid, tL2CAP_CFG_INFO *p_cfg); 551 552 /******************************************************************************* 553 ** 554 ** Function L2CA_DisconnectReq 555 ** 556 ** Description Higher layers call this function to disconnect a channel. 557 ** 558 ** Returns TRUE if disconnect sent, else FALSE 559 ** 560 *******************************************************************************/ 561 extern BOOLEAN L2CA_DisconnectReq (UINT16 cid); 562 563 /******************************************************************************* 564 ** 565 ** Function L2CA_DisconnectRsp 566 ** 567 ** Description Higher layers call this function to acknowledge the 568 ** disconnection of a channel. 569 ** 570 ** Returns void 571 ** 572 *******************************************************************************/ 573 extern BOOLEAN L2CA_DisconnectRsp (UINT16 cid); 574 575 /******************************************************************************* 576 ** 577 ** Function L2CA_DataWrite 578 ** 579 ** Description Higher layers call this function to write data. 580 ** 581 ** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE 582 ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested 583 ** L2CAP_DW_FAILED, if error 584 ** 585 *******************************************************************************/ 586 extern UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data); 587 588 /******************************************************************************* 589 ** 590 ** Function L2CA_Ping 591 ** 592 ** Description Higher layers call this function to send an echo request. 593 ** 594 ** Returns TRUE if echo request sent, else FALSE. 595 ** 596 *******************************************************************************/ 597 extern BOOLEAN L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_cb); 598 599 /******************************************************************************* 600 ** 601 ** Function L2CA_Echo 602 ** 603 ** Description Higher layers call this function to send an echo request 604 ** with application-specific data. 605 ** 606 ** Returns TRUE if echo request sent, else FALSE. 607 ** 608 *******************************************************************************/ 609 extern BOOLEAN L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback); 610 611 // Given a local channel identifier, |lcid|, this function returns the bound remote 612 // channel identifier, |rcid|, and the ACL link handle, |handle|. If |lcid| is not 613 // known or is invalid, this function returns false and does not modify the values 614 // pointed at by |rcid| and |handle|. |rcid| and |handle| may be NULL. 615 bool L2CA_GetIdentifiers(uint16_t lcid, uint16_t *rcid, uint16_t *handle); 616 617 /******************************************************************************* 618 ** 619 ** Function L2CA_SetIdleTimeout 620 ** 621 ** Description Higher layers call this function to set the idle timeout for 622 ** a connection, or for all future connections. The "idle timeout" 623 ** is the amount of time that a connection can remain up with 624 ** no L2CAP channels on it. A timeout of zero means that the 625 ** connection will be torn down immediately when the last channel 626 ** is removed. A timeout of 0xFFFF means no timeout. Values are 627 ** in seconds. 628 ** 629 ** Returns TRUE if command succeeded, FALSE if failed 630 ** 631 *******************************************************************************/ 632 extern BOOLEAN L2CA_SetIdleTimeout (UINT16 cid, UINT16 timeout, 633 BOOLEAN is_global); 634 635 /******************************************************************************* 636 ** 637 ** Function L2CA_SetIdleTimeoutByBdAddr 638 ** 639 ** Description Higher layers call this function to set the idle timeout for 640 ** a connection. The "idle timeout" is the amount of time that 641 ** a connection can remain up with no L2CAP channels on it. 642 ** A timeout of zero means that the connection will be torn 643 ** down immediately when the last channel is removed. 644 ** A timeout of 0xFFFF means no timeout. Values are in seconds. 645 ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, 646 ** then the idle timeouts for all active l2cap links will be 647 ** changed. 648 ** 649 ** Returns TRUE if command succeeded, FALSE if failed 650 ** 651 ** NOTE This timeout applies to all logical channels active on the 652 ** ACL link. 653 *******************************************************************************/ 654 extern BOOLEAN L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, UINT16 timeout, 655 tBT_TRANSPORT transport); 656 657 /******************************************************************************* 658 ** 659 ** Function L2CA_SetTraceLevel 660 ** 661 ** Description This function sets the trace level for L2CAP. If called with 662 ** a value of 0xFF, it simply reads the current trace level. 663 ** 664 ** Returns the new (current) trace level 665 ** 666 *******************************************************************************/ 667 extern UINT8 L2CA_SetTraceLevel (UINT8 trace_level); 668 669 /******************************************************************************* 670 ** 671 ** Function L2CA_SetDesireRole 672 ** 673 ** Description This function sets the desire role for L2CAP. 674 ** If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on 675 ** HciCreateConnection. 676 ** If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on 677 ** HciCreateConnection. 678 ** 679 ** If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE), 680 ** the desire role is set to the new value. Otherwise, it is not changed. 681 ** 682 ** Returns the new (current) role 683 ** 684 *******************************************************************************/ 685 extern UINT8 L2CA_SetDesireRole (UINT8 new_role); 686 687 /******************************************************************************* 688 ** 689 ** Function L2CA_LocalLoopbackReq 690 ** 691 ** Description This function sets up a CID for local loopback 692 ** 693 ** Returns CID of 0 if none. 694 ** 695 *******************************************************************************/ 696 extern UINT16 L2CA_LocalLoopbackReq (UINT16 psm, UINT16 handle, BD_ADDR p_bd_addr); 697 698 /******************************************************************************* 699 ** 700 ** Function L2CA_FlushChannel 701 ** 702 ** Description This function flushes none, some or all buffers queued up 703 ** for xmission for a particular CID. If called with 704 ** L2CAP_FLUSH_CHANS_GET (0), it simply returns the number 705 ** of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff) 706 ** flushes all buffers. All other values specifies the maximum 707 ** buffers to flush. 708 ** 709 ** Returns Number of buffers left queued for that CID 710 ** 711 *******************************************************************************/ 712 extern UINT16 L2CA_FlushChannel (UINT16 lcid, UINT16 num_to_flush); 713 714 715 /******************************************************************************* 716 ** 717 ** Function L2CA_SetAclPriority 718 ** 719 ** Description Sets the transmission priority for an ACL channel. 720 ** (For initial implementation only two values are valid. 721 ** L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH). 722 ** 723 ** Returns TRUE if a valid channel, else FALSE 724 ** 725 *******************************************************************************/ 726 extern BOOLEAN L2CA_SetAclPriority (BD_ADDR bd_addr, UINT8 priority); 727 728 /******************************************************************************* 729 ** 730 ** Function L2CA_FlowControl 731 ** 732 ** Description Higher layers call this function to flow control a channel. 733 ** 734 ** data_enabled - TRUE data flows, FALSE data is stopped 735 ** 736 ** Returns TRUE if valid channel, else FALSE 737 ** 738 *******************************************************************************/ 739 extern BOOLEAN L2CA_FlowControl (UINT16 cid, BOOLEAN data_enabled); 740 741 /******************************************************************************* 742 ** 743 ** Function L2CA_SendTestSFrame 744 ** 745 ** Description Higher layers call this function to send a test S-frame. 746 ** 747 ** Returns TRUE if valid Channel, else FALSE 748 ** 749 *******************************************************************************/ 750 extern BOOLEAN L2CA_SendTestSFrame (UINT16 cid, UINT8 sup_type, 751 UINT8 back_track); 752 753 /******************************************************************************* 754 ** 755 ** Function L2CA_SetTxPriority 756 ** 757 ** Description Sets the transmission priority for a channel. (FCR Mode) 758 ** 759 ** Returns TRUE if a valid channel, else FALSE 760 ** 761 *******************************************************************************/ 762 extern BOOLEAN L2CA_SetTxPriority (UINT16 cid, tL2CAP_CHNL_PRIORITY priority); 763 764 /******************************************************************************* 765 ** 766 ** Function L2CA_RegForNoCPEvt 767 ** 768 ** Description Register callback for Number of Completed Packets event. 769 ** 770 ** Input Param p_cb - callback for Number of completed packets event 771 ** p_bda - BT address of remote device 772 ** 773 ** Returns 774 ** 775 *******************************************************************************/ 776 extern BOOLEAN L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda); 777 778 /******************************************************************************* 779 ** 780 ** Function L2CA_SetChnlDataRate 781 ** 782 ** Description Sets the tx/rx data rate for a channel. 783 ** 784 ** Returns TRUE if a valid channel, else FALSE 785 ** 786 *******************************************************************************/ 787 extern BOOLEAN L2CA_SetChnlDataRate (UINT16 cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx); 788 789 typedef void (tL2CA_RESERVE_CMPL_CBACK) (void); 790 791 /******************************************************************************* 792 ** 793 ** Function L2CA_SetFlushTimeout 794 ** 795 ** Description This function set the automatic flush time out in Baseband 796 ** for ACL-U packets. 797 ** BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY 798 ** then the flush time out will be applied to all ACL link. 799 ** FlushTimeout: flush time out in ms 800 ** 0x0000 : No automatic flush 801 ** L2CAP_NO_RETRANSMISSION : No retransmission 802 ** 0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5) 803 ** <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot). 804 ** Otherwise, return FALSE. 805 ** L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush 806 ** 807 ** Returns TRUE if command succeeded, FALSE if failed 808 ** 809 ** NOTE This flush timeout applies to all logical channels active on the 810 ** ACL link. 811 *******************************************************************************/ 812 extern BOOLEAN L2CA_SetFlushTimeout (BD_ADDR bd_addr, UINT16 flush_tout); 813 814 /******************************************************************************* 815 ** 816 ** Function L2CA_DataWriteEx 817 ** 818 ** Description Higher layers call this function to write data with extended 819 ** flags. 820 ** flags : L2CAP_FLUSHABLE_CH_BASED 821 ** L2CAP_FLUSHABLE_PKT 822 ** L2CAP_NON_FLUSHABLE_PKT 823 ** 824 ** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE 825 ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested 826 ** L2CAP_DW_FAILED, if error 827 ** 828 *******************************************************************************/ 829 extern UINT8 L2CA_DataWriteEx (UINT16 cid, BT_HDR *p_data, UINT16 flags); 830 831 /******************************************************************************* 832 ** 833 ** Function L2CA_SetChnlFlushability 834 ** 835 ** Description Higher layers call this function to set a channels 836 ** flushability flags 837 ** 838 ** Returns TRUE if CID found, else FALSE 839 ** 840 *******************************************************************************/ 841 extern BOOLEAN L2CA_SetChnlFlushability (UINT16 cid, BOOLEAN is_flushable); 842 843 /******************************************************************************* 844 ** 845 ** Function L2CA_GetPeerFeatures 846 ** 847 ** Description Get a peers features and fixed channel map 848 ** 849 ** Parameters: BD address of the peer 850 ** Pointers to features and channel mask storage area 851 ** 852 ** Return value: TRUE if peer is connected 853 ** 854 *******************************************************************************/ 855 extern BOOLEAN L2CA_GetPeerFeatures (BD_ADDR bd_addr, UINT32 *p_ext_feat, UINT8 *p_chnl_mask); 856 857 /******************************************************************************* 858 ** 859 ** Function L2CA_GetBDAddrbyHandle 860 ** 861 ** Description Get BD address for the given HCI handle 862 ** 863 ** Parameters: HCI handle 864 ** BD address of the peer 865 ** 866 ** Return value: TRUE if found lcb for the given handle, FALSE otherwise 867 ** 868 *******************************************************************************/ 869 extern BOOLEAN L2CA_GetBDAddrbyHandle (UINT16 handle, BD_ADDR bd_addr); 870 871 /******************************************************************************* 872 ** 873 ** Function L2CA_GetChnlFcrMode 874 ** 875 ** Description Get the channel FCR mode 876 ** 877 ** Parameters: Local CID 878 ** 879 ** Return value: Channel mode 880 ** 881 *******************************************************************************/ 882 extern UINT8 L2CA_GetChnlFcrMode (UINT16 lcid); 883 884 885 /******************************************************************************* 886 ** 887 ** UCD callback prototypes 888 ** 889 *******************************************************************************/ 890 891 /* UCD discovery. Parameters are 892 ** BD Address of remote 893 ** Data Type 894 ** Data 895 */ 896 #define L2CAP_UCD_INFO_TYPE_RECEPTION 0x01 897 #define L2CAP_UCD_INFO_TYPE_MTU 0x02 898 899 typedef void (tL2CA_UCD_DISCOVER_CB) (BD_ADDR, UINT8, UINT32); 900 901 /* UCD data received. Parameters are 902 ** BD Address of remote 903 ** Pointer to buffer with data 904 */ 905 typedef void (tL2CA_UCD_DATA_CB) (BD_ADDR, BT_HDR *); 906 907 /* Congestion status callback protype. This callback is optional. If 908 ** an application tries to send data when the transmit queue is full, 909 ** the data will anyways be dropped. The parameter is: 910 ** remote BD_ADDR 911 ** TRUE if congested, FALSE if uncongested 912 */ 913 typedef void (tL2CA_UCD_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN); 914 915 /* UCD registration info (the callback addresses and PSM) 916 */ 917 typedef struct 918 { 919 tL2CA_UCD_DISCOVER_CB *pL2CA_UCD_Discover_Cb; 920 tL2CA_UCD_DATA_CB *pL2CA_UCD_Data_Cb; 921 tL2CA_UCD_CONGESTION_STATUS_CB *pL2CA_UCD_Congestion_Status_Cb; 922 } tL2CAP_UCD_CB_INFO; 923 924 /******************************************************************************* 925 ** 926 ** Function L2CA_UcdRegister 927 ** 928 ** Description Register PSM on UCD. 929 ** 930 ** Parameters: tL2CAP_UCD_CB_INFO 931 ** 932 ** Return value: TRUE if successs 933 ** 934 *******************************************************************************/ 935 extern BOOLEAN L2CA_UcdRegister ( UINT16 psm, tL2CAP_UCD_CB_INFO *p_cb_info ); 936 937 /******************************************************************************* 938 ** 939 ** Function L2CA_UcdDeregister 940 ** 941 ** Description Deregister PSM on UCD. 942 ** 943 ** Parameters: PSM 944 ** 945 ** Return value: TRUE if successs 946 ** 947 *******************************************************************************/ 948 extern BOOLEAN L2CA_UcdDeregister ( UINT16 psm ); 949 950 /******************************************************************************* 951 ** 952 ** Function L2CA_UcdDiscover 953 ** 954 ** Description Discover UCD of remote device. 955 ** 956 ** Parameters: PSM 957 ** BD_ADDR of remote device 958 ** info_type : L2CAP_UCD_INFO_TYPE_RECEPTION 959 ** L2CAP_UCD_INFO_TYPE_MTU 960 ** 961 ** 962 ** Return value: TRUE if successs 963 ** 964 *******************************************************************************/ 965 extern BOOLEAN L2CA_UcdDiscover ( UINT16 psm, BD_ADDR rem_bda, UINT8 info_type ); 966 967 /******************************************************************************* 968 ** 969 ** Function L2CA_UcdDataWrite 970 ** 971 ** Description Send UCD to remote device 972 ** 973 ** Parameters: PSM 974 ** BD Address of remote 975 ** Pointer to buffer of type BT_HDR 976 ** flags : L2CAP_FLUSHABLE_CH_BASED 977 ** L2CAP_FLUSHABLE_PKT 978 ** L2CAP_NON_FLUSHABLE_PKT 979 ** 980 ** Return value L2CAP_DW_SUCCESS, if data accepted 981 ** L2CAP_DW_FAILED, if error 982 ** 983 *******************************************************************************/ 984 extern UINT16 L2CA_UcdDataWrite (UINT16 psm, BD_ADDR rem_bda, BT_HDR *p_buf, UINT16 flags); 985 986 /******************************************************************************* 987 ** 988 ** Function L2CA_UcdSetIdleTimeout 989 ** 990 ** Description Set UCD Idle timeout. 991 ** 992 ** Parameters: BD Addr 993 ** Timeout in second 994 ** 995 ** Return value: TRUE if successs 996 ** 997 *******************************************************************************/ 998 extern BOOLEAN L2CA_UcdSetIdleTimeout ( BD_ADDR rem_bda, UINT16 timeout ); 999 1000 /******************************************************************************* 1001 ** 1002 ** Function L2CA_UCDSetTxPriority 1003 ** 1004 ** Description Sets the transmission priority for a connectionless channel. 1005 ** 1006 ** Returns TRUE if a valid channel, else FALSE 1007 ** 1008 *******************************************************************************/ 1009 extern BOOLEAN L2CA_UCDSetTxPriority ( BD_ADDR rem_bda, tL2CAP_CHNL_PRIORITY priority ); 1010 1011 1012 /******************************************************************************* 1013 ** 1014 ** Fixed Channel callback prototypes 1015 ** 1016 *******************************************************************************/ 1017 1018 /* Fixed channel connected and disconnected. Parameters are 1019 ** channel 1020 ** BD Address of remote 1021 ** TRUE if channel is connected, FALSE if disconnected 1022 ** Reason for connection failure 1023 ** transport : physical transport, BR/EDR or LE 1024 */ 1025 typedef void (tL2CA_FIXED_CHNL_CB) (UINT16, BD_ADDR, BOOLEAN, UINT16, tBT_TRANSPORT); 1026 1027 /* Signalling data received. Parameters are 1028 ** channel 1029 ** BD Address of remote 1030 ** Pointer to buffer with data 1031 */ 1032 typedef void (tL2CA_FIXED_DATA_CB) (UINT16, BD_ADDR, BT_HDR *); 1033 1034 /* Congestion status callback protype. This callback is optional. If 1035 ** an application tries to send data when the transmit queue is full, 1036 ** the data will anyways be dropped. The parameter is: 1037 ** remote BD_ADDR 1038 ** TRUE if congested, FALSE if uncongested 1039 */ 1040 typedef void (tL2CA_FIXED_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN); 1041 1042 /* Fixed channel registration info (the callback addresses and channel config) 1043 */ 1044 typedef struct 1045 { 1046 tL2CA_FIXED_CHNL_CB *pL2CA_FixedConn_Cb; 1047 tL2CA_FIXED_DATA_CB *pL2CA_FixedData_Cb; 1048 tL2CA_FIXED_CONGESTION_STATUS_CB *pL2CA_FixedCong_Cb; 1049 tL2CAP_FCR_OPTS fixed_chnl_opts; 1050 1051 UINT16 default_idle_tout; 1052 tL2CA_TX_COMPLETE_CB *pL2CA_FixedTxComplete_Cb; /* fixed channel tx complete callback */ 1053 } tL2CAP_FIXED_CHNL_REG; 1054 1055 1056 #if (L2CAP_NUM_FIXED_CHNLS > 0) 1057 /******************************************************************************* 1058 ** 1059 ** Function L2CA_RegisterFixedChannel 1060 ** 1061 ** Description Register a fixed channel. 1062 ** 1063 ** Parameters: Fixed Channel # 1064 ** Channel Callbacks and config 1065 ** 1066 ** Return value: TRUE if registered OK 1067 ** 1068 *******************************************************************************/ 1069 extern BOOLEAN L2CA_RegisterFixedChannel (UINT16 fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg); 1070 1071 /******************************************************************************* 1072 ** 1073 ** Function L2CA_ConnectFixedChnl 1074 ** 1075 ** Description Connect an fixed signalling channel to a remote device. 1076 ** 1077 ** Parameters: Fixed CID 1078 ** BD Address of remote 1079 ** 1080 ** Return value: TRUE if connection started 1081 ** 1082 *******************************************************************************/ 1083 extern BOOLEAN L2CA_ConnectFixedChnl (UINT16 fixed_cid, BD_ADDR bd_addr); 1084 1085 /******************************************************************************* 1086 ** 1087 ** Function L2CA_SendFixedChnlData 1088 ** 1089 ** Description Write data on a fixed signalling channel. 1090 ** 1091 ** Parameters: Fixed CID 1092 ** BD Address of remote 1093 ** Pointer to buffer of type BT_HDR 1094 ** 1095 ** Return value L2CAP_DW_SUCCESS, if data accepted 1096 ** L2CAP_DW_FAILED, if error 1097 ** 1098 *******************************************************************************/ 1099 extern UINT16 L2CA_SendFixedChnlData (UINT16 fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf); 1100 1101 /******************************************************************************* 1102 ** 1103 ** Function L2CA_RemoveFixedChnl 1104 ** 1105 ** Description Remove a fixed channel to a remote device. 1106 ** 1107 ** Parameters: Fixed CID 1108 ** BD Address of remote 1109 ** Idle timeout to use (or 0xFFFF if don't care) 1110 ** 1111 ** Return value: TRUE if channel removed 1112 ** 1113 *******************************************************************************/ 1114 extern BOOLEAN L2CA_RemoveFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda); 1115 1116 /******************************************************************************* 1117 ** 1118 ** Function L2CA_SetFixedChannelTout 1119 ** 1120 ** Description Higher layers call this function to set the idle timeout for 1121 ** a fixed channel. The "idle timeout" is the amount of time that 1122 ** a connection can remain up with no L2CAP channels on it. 1123 ** A timeout of zero means that the connection will be torn 1124 ** down immediately when the last channel is removed. 1125 ** A timeout of 0xFFFF means no timeout. Values are in seconds. 1126 ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, 1127 ** then the idle timeouts for all active l2cap links will be 1128 ** changed. 1129 ** 1130 ** Returns TRUE if command succeeded, FALSE if failed 1131 ** 1132 *******************************************************************************/ 1133 extern BOOLEAN L2CA_SetFixedChannelTout (BD_ADDR rem_bda, UINT16 fixed_cid, UINT16 idle_tout); 1134 1135 #endif /* (L2CAP_NUM_FIXED_CHNLS > 0) */ 1136 1137 /******************************************************************************* 1138 ** 1139 ** Function L2CA_GetCurrentConfig 1140 ** 1141 ** Description This function returns configurations of L2CAP channel 1142 ** pp_our_cfg : pointer of our saved configuration options 1143 ** p_our_cfg_bits : valid config in bitmap 1144 ** pp_peer_cfg: pointer of peer's saved configuration options 1145 ** p_peer_cfg_bits : valid config in bitmap 1146 ** 1147 ** Returns TRUE if successful 1148 ** 1149 *******************************************************************************/ 1150 extern BOOLEAN L2CA_GetCurrentConfig (UINT16 lcid, 1151 tL2CAP_CFG_INFO **pp_our_cfg, tL2CAP_CH_CFG_BITS *p_our_cfg_bits, 1152 tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits); 1153 1154 /******************************************************************************* 1155 ** 1156 ** Function L2CA_GetConnectionConfig 1157 ** 1158 ** Description This function polulates the mtu, remote cid & lm_handle for 1159 ** a given local L2CAP channel 1160 ** 1161 ** Returns TRUE if successful 1162 ** 1163 *******************************************************************************/ 1164 extern BOOLEAN L2CA_GetConnectionConfig(UINT16 lcid, UINT16 *mtu, UINT16 *rcid, UINT16 *handle); 1165 1166 #if (BLE_INCLUDED == TRUE) 1167 /******************************************************************************* 1168 ** 1169 ** Function L2CA_CancelBleConnectReq 1170 ** 1171 ** Description Cancel a pending connection attempt to a BLE device. 1172 ** 1173 ** Parameters: BD Address of remote 1174 ** 1175 ** Return value: TRUE if connection was cancelled 1176 ** 1177 *******************************************************************************/ 1178 extern BOOLEAN L2CA_CancelBleConnectReq (BD_ADDR rem_bda); 1179 1180 /******************************************************************************* 1181 ** 1182 ** Function L2CA_UpdateBleConnParams 1183 ** 1184 ** Description Update BLE connection parameters. 1185 ** 1186 ** Parameters: BD Address of remote 1187 ** 1188 ** Return value: TRUE if update started 1189 ** 1190 *******************************************************************************/ 1191 extern BOOLEAN L2CA_UpdateBleConnParams (BD_ADDR rem_bdRa, UINT16 min_int, 1192 UINT16 max_int, UINT16 latency, UINT16 timeout); 1193 1194 /******************************************************************************* 1195 ** 1196 ** Function L2CA_EnableUpdateBleConnParams 1197 ** 1198 ** Description Update BLE connection parameters. 1199 ** 1200 ** Parameters: BD Address of remote 1201 ** enable flag 1202 ** 1203 ** Return value: TRUE if update started 1204 ** 1205 *******************************************************************************/ 1206 extern BOOLEAN L2CA_EnableUpdateBleConnParams (BD_ADDR rem_bda, BOOLEAN enable); 1207 1208 /******************************************************************************* 1209 ** 1210 ** Function L2CA_GetBleConnRole 1211 ** 1212 ** Description This function returns the connection role. 1213 ** 1214 ** Returns link role. 1215 ** 1216 *******************************************************************************/ 1217 extern UINT8 L2CA_GetBleConnRole (BD_ADDR bd_addr); 1218 1219 /******************************************************************************* 1220 ** 1221 ** Function L2CA_GetDisconnectReason 1222 ** 1223 ** Description This function returns the disconnect reason code. 1224 ** 1225 ** Parameters: BD Address of remote 1226 ** Physical transport for the L2CAP connection (BR/EDR or LE) 1227 ** 1228 ** Returns disconnect reason 1229 ** 1230 *******************************************************************************/ 1231 extern UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda, tBT_TRANSPORT transport); 1232 1233 #endif /* (BLE_INCLUDED == TRUE) */ 1234 1235 #ifdef __cplusplus 1236 } 1237 #endif 1238 1239 #endif /* L2C_API_H */ 1240
