Lines Matching full:card
120 /* New state for TOPAZ dynamic card*/
140 /* First lock or reserved block in the static area of the card */
142 /* First lock or reserved byte number in the static area of the card */
144 /* End lock or reserved byte number in the static area of the card */
150 /* In TOPAZ card each block has 8 bytes */
160 /* Total segments in TOPAZ 512 bytes card. Each segment = 128 bytes,
161 so there are 4 segements in the card */
178 /* Get the exact byte address of the card from the segment number
183 /* Get the segment number of the card from the byte address */
186 /* Get the block number of the card from the byte address */
189 /* Get the block offset of a block number of the card from the byte address */
192 /* Get the exact byte address of the card from the block number
227 * bytes from the card.
266 * the lock bits and set a card state
275 * bytes into the card
358 * This function checks for the lock bytes value and card state also.
426 * be read and written in the card.
455 * write buffer and writes the data to the card. If the lock or memory blocks are in between the
518 * updates the length bytes with exact bytes that was written in the card
589 /* Set card state */
639 /* Number of bytes read from the card is zero.
641 from the card. */
777 /* Number of bytes written to the card is zero.
779 to the card. */
798 /* Offset = Current, but the read has reached the End of Card */
804 /* No NDEF TLV found in the card, so write not possible */
1475 /* Data to be written is completely written to the card */
1770 /* Read bytes from the card */
2131 corrupted or no NDEF TLV in the card
2134 card is 0, means that previous write has failed,
2137 The NDEF TLV is not present in the entire card, and
2139 memory control TLV is found in the card)
2226 /* Set the card state */
2249 /* Set the card state from CC bytes */
2322 /* 3rd CC byte value = 0x3F for 512 card */
2325 /* Card size calculated as ((3rd CC byte * 8) - 4 CC bytes) */
2847 TYPE field is not found after reading entire card */
2864 (which are the last 24 bytes in the card) */
2874 /* Macro used to get the exact byte address of the card.
3036 /* Check for remaining size in the card and the actual ndef length */
3062 /* Wrong length, remaining size in the card is lesser than the actual
3104 /* Check if the card state is READ ONLY or the actual NDEF size is 0
3105 if actual NDEF size is 0, then card state is INITIALISED
3151 no NDEF TLV in the card
3153 If the 1st CC byte (NDEF magic number) in the card is 0, means
3157 The NDEF TLV is not present in the entire card, and the sequence is
3159 in the card)
