1 /****************************************************************************** 2 * 3 * Copyright (C) 2003-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This interface file contains the interface to the Audio Video Control 22 * Transport Protocol (AVCTP). 23 * 24 ******************************************************************************/ 25 #ifndef AVCT_API_H 26 #define AVCT_API_H 27 28 #include "bt_types.h" 29 #include "bt_target.h" 30 31 /***************************************************************************** 32 ** Constants 33 *****************************************************************************/ 34 35 /* API function return value result codes. */ 36 #define AVCT_SUCCESS 0 /* Function successful */ 37 #define AVCT_NO_RESOURCES 1 /* Not enough resources */ 38 #define AVCT_BAD_HANDLE 2 /* Bad handle */ 39 #define AVCT_PID_IN_USE 3 /* PID already in use */ 40 #define AVCT_NOT_OPEN 4 /* Connection not open */ 41 42 /* PSM for AVCT. */ 43 #define AVCT_PSM 0x0017 44 #define AVCT_BR_PSM 0x001B 45 46 /* Protocol revision numbers */ 47 #define AVCT_REV_1_0 0x0100 48 #define AVCT_REV_1_2 0x0102 49 #define AVCT_REV_1_3 0x0103 50 #define AVCT_REV_1_4 0x0104 51 52 /* the layer_specific settings */ 53 #define AVCT_DATA_CTRL 0x0001 /* for the control channel */ 54 #define AVCT_DATA_BROWSE 0x0002 /* for the browsing channel */ 55 #define AVCT_DATA_PARTIAL 0x0100 /* Only have room for a partial message */ 56 57 #define AVCT_MIN_CONTROL_MTU 48 /* Per the AVRC spec, minimum MTU for the control channel */ 58 #define AVCT_MIN_BROWSE_MTU 335 /* Per the AVRC spec, minimum MTU for the browsing channel */ 59 60 /* Message offset. The number of bytes needed by the protocol stack for the 61 ** protocol headers of an AVCTP message packet. 62 */ 63 #define AVCT_MSG_OFFSET 15 64 #define AVCT_BROWSE_OFFSET 17 /* the default offset for browsing channel */ 65 66 /* Connection role. */ 67 #define AVCT_INT 0 /* Initiator connection */ 68 #define AVCT_ACP 1 /* Acceptor connection */ 69 70 /* Control role. */ 71 #define AVCT_TARGET 1 /* target */ 72 #define AVCT_CONTROL 2 /* controller */ 73 #define AVCT_PASSIVE 4 /* If conflict, allow the other side to succeed */ 74 75 /* Command/Response indicator. */ 76 #define AVCT_CMD 0 /* Command message */ 77 #define AVCT_RSP 2 /* Response message */ 78 #define AVCT_REJ 3 /* Message rejected */ 79 80 /* Control callback events. */ 81 #define AVCT_CONNECT_CFM_EVT 0 /* Connection confirm */ 82 #define AVCT_CONNECT_IND_EVT 1 /* Connection indication */ 83 #define AVCT_DISCONNECT_CFM_EVT 2 /* Disconnect confirm */ 84 #define AVCT_DISCONNECT_IND_EVT 3 /* Disconnect indication */ 85 #define AVCT_CONG_IND_EVT 4 /* Congestion indication */ 86 #define AVCT_UNCONG_IND_EVT 5 /* Uncongestion indication */ 87 #define AVCT_BROWSE_CONN_CFM_EVT 6 /* Browse Connection confirm */ 88 #define AVCT_BROWSE_CONN_IND_EVT 7 /* Browse Connection indication */ 89 #define AVCT_BROWSE_DISCONN_CFM_EVT 8 /* Browse Disconnect confirm */ 90 #define AVCT_BROWSE_DISCONN_IND_EVT 9 /* Browse Disconnect indication */ 91 #define AVCT_BROWSE_CONG_IND_EVT 10 /* Congestion indication */ 92 #define AVCT_BROWSE_UNCONG_IND_EVT 11 /* Uncongestion indication */ 93 94 95 /* General purpose failure result code for callback events. */ 96 #define AVCT_RESULT_FAIL 5 97 98 /***************************************************************************** 99 ** Type Definitions 100 *****************************************************************************/ 101 102 /* Control callback function. */ 103 typedef void (tAVCT_CTRL_CBACK)(UINT8 handle, UINT8 event, UINT16 result, 104 BD_ADDR peer_addr); 105 106 /* Message callback function */ 107 /* p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE */ 108 typedef void (tAVCT_MSG_CBACK)(UINT8 handle, UINT8 label, UINT8 cr, 109 BT_HDR *p_pkt); 110 111 /* Structure used by AVCT_CreateConn. */ 112 typedef struct { 113 tAVCT_CTRL_CBACK *p_ctrl_cback; /* Control callback */ 114 tAVCT_MSG_CBACK *p_msg_cback; /* Message callback */ 115 UINT16 pid; /* Profile ID */ 116 UINT8 role; /* Initiator/acceptor role */ 117 UINT8 control; /* Control role (Control/Target) */ 118 } tAVCT_CC; 119 120 /***************************************************************************** 121 ** External Function Declarations 122 *****************************************************************************/ 123 #ifdef __cplusplus 124 extern "C" 125 { 126 #endif 127 128 /******************************************************************************* 129 ** 130 ** Function AVCT_Register 131 ** 132 ** Description This is the system level registration function for the 133 ** AVCTP protocol. This function initializes AVCTP and 134 ** prepares the protocol stack for its use. This function 135 ** must be called once by the system or platform using AVCTP 136 ** before the other functions of the API an be used. 137 ** 138 ** 139 ** Returns void 140 ** 141 *******************************************************************************/ 142 extern void AVCT_Register(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask); 143 144 /******************************************************************************* 145 ** 146 ** Function AVCT_Deregister 147 ** 148 ** Description This function is called to deregister use AVCTP protocol. 149 ** It is called when AVCTP is no longer being used by any 150 ** application in the system. Before this function can be 151 ** called, all connections must be removed with 152 ** AVCT_RemoveConn(). 153 ** 154 ** 155 ** Returns void 156 ** 157 *******************************************************************************/ 158 extern void AVCT_Deregister(void); 159 160 /******************************************************************************* 161 ** 162 ** Function AVCT_CreateConn 163 ** 164 ** Description Create an AVCTP connection. There are two types of 165 ** connections, initiator and acceptor, as determined by 166 ** the p_cc->role parameter. When this function is called to 167 ** create an initiator connection, an AVCTP connection to 168 ** the peer device is initiated if one does not already exist. 169 ** If an acceptor connection is created, the connection waits 170 ** passively for an incoming AVCTP connection from a peer device. 171 ** 172 ** 173 ** Returns AVCT_SUCCESS if successful, otherwise error. 174 ** 175 *******************************************************************************/ 176 extern UINT16 AVCT_CreateConn(UINT8 *p_handle, tAVCT_CC *p_cc, 177 BD_ADDR peer_addr); 178 179 /******************************************************************************* 180 ** 181 ** Function AVCT_RemoveConn 182 ** 183 ** Description Remove an AVCTP connection. This function is called when 184 ** the application is no longer using a connection. If this 185 ** is the last connection to a peer the L2CAP channel for AVCTP 186 ** will be closed. 187 ** 188 ** 189 ** Returns AVCT_SUCCESS if successful, otherwise error. 190 ** 191 *******************************************************************************/ 192 extern UINT16 AVCT_RemoveConn(UINT8 handle); 193 194 /******************************************************************************* 195 ** 196 ** Function AVCT_CreateBrowse 197 ** 198 ** Description Create an AVCTP connection. There are two types of 199 ** connections, initiator and acceptor, as determined by 200 ** the p_cc->role parameter. When this function is called to 201 ** create an initiator connection, an AVCTP connection to 202 ** the peer device is initiated if one does not already exist. 203 ** If an acceptor connection is created, the connection waits 204 ** passively for an incoming AVCTP connection from a peer device. 205 ** 206 ** 207 ** Returns AVCT_SUCCESS if successful, otherwise error. 208 ** 209 *******************************************************************************/ 210 extern UINT16 AVCT_CreateBrowse(UINT8 handle, UINT8 role); 211 212 /******************************************************************************* 213 ** 214 ** Function AVCT_RemoveBrowse 215 ** 216 ** Description Remove an AVCTP connection. This function is called when 217 ** the application is no longer using a connection. If this 218 ** is the last connection to a peer the L2CAP channel for AVCTP 219 ** will be closed. 220 ** 221 ** 222 ** Returns AVCT_SUCCESS if successful, otherwise error. 223 ** 224 *******************************************************************************/ 225 extern UINT16 AVCT_RemoveBrowse(UINT8 handle); 226 227 /******************************************************************************* 228 ** 229 ** Function AVCT_GetBrowseMtu 230 ** 231 ** Description Get the peer_mtu for the AVCTP Browse channel of the given 232 ** connection. 233 ** 234 ** Returns the peer browsing channel MTU. 235 ** 236 *******************************************************************************/ 237 extern UINT16 AVCT_GetBrowseMtu (UINT8 handle); 238 239 /******************************************************************************* 240 ** 241 ** Function AVCT_GetPeerMtu 242 ** 243 ** Description Get the peer_mtu for the AVCTP channel of the given 244 ** connection. 245 ** 246 ** Returns the peer MTU size. 247 ** 248 *******************************************************************************/ 249 extern UINT16 AVCT_GetPeerMtu (UINT8 handle); 250 251 /******************************************************************************* 252 ** 253 ** Function AVCT_MsgReq 254 ** 255 ** Description Send an AVCTP message to a peer device. In calling 256 ** AVCT_MsgReq(), the application should keep track of the 257 ** congestion state of AVCTP as communicated with events 258 ** AVCT_CONG_IND_EVT and AVCT_UNCONG_IND_EVT. If the 259 ** application calls AVCT_MsgReq() when AVCTP is congested 260 ** the message may be discarded. The application may make its 261 ** first call to AVCT_MsgReq() after it receives an 262 ** AVCT_CONNECT_CFM_EVT or AVCT_CONNECT_IND_EVT on control channel or 263 ** AVCT_BROWSE_CONN_CFM_EVT or AVCT_BROWSE_CONN_IND_EVT on browsing channel. 264 ** 265 ** p_msg->layer_specific must be set to 266 ** AVCT_DATA_CTRL for control channel traffic; 267 ** AVCT_DATA_BROWSE for for browse channel traffic. 268 ** 269 ** Returns AVCT_SUCCESS if successful, otherwise error. 270 ** 271 *******************************************************************************/ 272 extern UINT16 AVCT_MsgReq(UINT8 handle, UINT8 label, UINT8 cr, BT_HDR *p_msg); 273 274 #ifdef __cplusplus 275 } 276 #endif 277 278 279 #endif /* AVCT_API_H */ 280
