| /prebuilts/ndk/current/platforms/android-18/arch-mips/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-18/arch-x86/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-19/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-19/arch-mips/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-19/arch-x86/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-3/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-4/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-5/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-8/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-9/arch-arm/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-9/arch-mips/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/current/platforms/android-9/arch-x86/usr/include/linux/ |
| qic117.h | 121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/tools/common/m2/repository/org/apache/maven/maven-error-diagnostics/2.0.7/ |
| maven-error-diagnostics-2.0.7.pom | 31 <description>Provides a manager component which will process a given Throwable instance through a set of diagnostic
|
| /prebuilts/tools/common/m2/repository/org/apache/maven/maven-error-diagnostics/2.0.9/ |
| maven-error-diagnostics-2.0.9.pom | 31 <description>Provides a manager component which will process a given Throwable instance through a set of diagnostic
|
| /prebuilts/tools/common/m2/repository/org/apache/maven/maven-error-diagnostics/2.2.1/ |
| maven-error-diagnostics-2.2.1.pom | 31 <description>Provides a manager component which will process a given Throwable instance through a set of diagnostic
|
| /external/clang/lib/Frontend/ |
| DiagnosticRenderer.cpp | 1 //===--- DiagnosticRenderer.cpp - Diagnostic Pretty-Printing --------------===//
135 // If we have no source location, just emit the diagnostic message.
156 // Find the ultimate expansion location for the diagnostic.
161 // First, if this diagnostic is not in the main file, print out the
165 // Next, emit the actual diagnostic message and caret.
198 /// diagnostic level and location.
205 /// \param Loc The diagnostic location.
206 /// \param PLoc The presumed location of the diagnostic location.
207 /// \param Level The diagnostic level of the message this stack pertains to.
471 // Map the ranges into the FileID of the diagnostic location
[all...] |
| /external/clang/test/Driver/ |
| msc-version.c | 42 // Verify -fmsc-version and -fms-compatibility-version diagnostic
45 // RUN: not %clang -target i686-windows -fms-compatibility -fmsc-version=1700 -fms-compatibility-version=17.00.50727.1 -E - </dev/null 2>&1 | FileCheck %s -check-prefix CHECK-BASIC-EXTENDED-DIAGNOSTIC
47 // CHECK-BASIC-EXTENDED-DIAGNOSTIC: invalid argument '-fmsc-version={{.*}}' not allowed with '-fms-compatibility-version={{.*}}'
|
| /external/clang/test/SemaObjC/ |
| deprecated-objc-introspection.m | 100 #pragma clang diagnostic push
101 #pragma clang diagnostic ignored "-Wdeprecated-objc-pointer-introspection-performSelector"
103 #pragma clang diagnostic pop
|
| objc-literal-comparison.m | 75 #pragma clang diagnostic push
76 #pragma clang diagnostic ignored "-Wobjc-string-compare"
86 #pragma clang diagnostic pop
|
| /external/libweave/third_party/chromium/base/strings/ |
| stringprintf_unittest.cc | 25 #pragma GCC diagnostic push
26 #pragma GCC diagnostic ignored "-Wformat-nonliteral"
28 #pragma GCC diagnostic pop
|
| /external/mesa3d/docs/ |
| MESA_shader_debug.spec | 44 during execution, issue diagnostic function calls that are logged
204 a diagnostic message is written to the "debug assert log".
218 The diagnostic message examples follow.
|
| /frameworks/base/cmds/screencap/ |
| screencap.cpp | 37 #pragma GCC diagnostic push
38 #pragma GCC diagnostic ignored "-Wunused-parameter"
41 #pragma GCC diagnostic pop
|
| /frameworks/base/core/jni/ |
| android_opengl_EGLExt.cpp | 19 #pragma GCC diagnostic ignored "-Wunused-variable"
20 #pragma GCC diagnostic ignored "-Wunused-but-set-variable"
21 #pragma GCC diagnostic ignored "-Wunused-function"
|
| /frameworks/native/libs/ui/ |
| Fence.cpp | 23 #pragma clang diagnostic push
24 #pragma clang diagnostic ignored "-Wzero-length-array"
26 #pragma clang diagnostic pop
|
| /frameworks/native/opengl/tools/glgen/stubs/egl/ |
| EGL14cHeader.cpp | 19 #pragma GCC diagnostic ignored "-Wunused-variable"
20 #pragma GCC diagnostic ignored "-Wunused-but-set-variable"
21 #pragma GCC diagnostic ignored "-Wunused-function"
|
