Lines Matching full:probe
225 * ago the last Beacon or Probe Response frame was received)
241 * This structure data is followed by ie_len octets of IEs from Probe Response
324 * extra_ies - Extra IE(s) to add into Probe Request or %NULL
377 * Mbps from the support rates element(s) in the Probe Request frames
936 * proberesp - Probe Response template
938 * This is used by drivers that reply to Probe Requests internally in
939 * AP mode and require the full Probe Response template.
949 * ssid - The SSID to use in Beacon/Probe Response frames
1002 * proberesp_ies - P2P/WPS IE(s) for Probe Response frames
1005 * reply to Probe Request frames internally.
1061 * This is used for filtering Probe Request frames when Interworking is
1234 /** Driver indicates support for Probe Response offloading in AP mode */
1288 /** Maximum number of supported active probe SSIDs */
1291 /** Maximum number of supported active probe SSIDs for sched_scan */
1322 * for Probe Response offloading.
1324 /** Driver Probe Response offloading support for WPS ver. 1 */
1326 /** Driver Probe Response offloading support for WPS ver. 2 */
1328 /** Driver Probe Response offloading support for P2P */
1330 /** Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
1352 /** Driver adds the DS Params Set IE in Probe Request frames */
1354 /** Driver adds the WFA TPC IE in Probe Request frames */
1588 * @proberesp_ies: Extra information element(s) to add into Probe Response
1592 * @probe_resp: Probe Response frame template
1598 * @probe_resp_len: Length of probe response template (@probe_resp)
1619 * @beacon_csa: Beacon/probe resp/asooc resp info for CSA period
1620 * @beacon_after: Next beacon/probe resp/asooc resp info
1622 * @counter_offset_presp: Offset to the count field in probe resp.
2174 * set_ap - Set Beacon and Probe Response information for AP mode
2179 * to add for Beacon and Probe Response frames for the driver in
2185 * Similarly, Probe Response processing depends on the driver design.
2186 * If the driver (or firmware) takes care of replying to Probe Request
2187 * frames, the extra IEs provided here needs to be added to the Probe
2281 * set_generic_elem - Add IEs into Beacon/Probe Response frames (AP)
2288 * kernel driver for Beacon and Probe Response frames. This can be left
2366 * template from set_ap() and does not reply to Probe Request frames.
2574 * set_ap_wps_ie - Add WPS IE(s) into Beacon/Probe Response frames (AP)
2577 * @proberesp: WPS IE(s) for Probe Response frames or %NULL to remove
2584 * Beacon and Probe Response frames. This can be left undefined (set
2586 * and does not process Probe Request frames. If the driver takes care
2591 * This will also be used to add P2P IE(s) into Beacon/Probe Response
2595 * also used to provide Probe Response IEs for P2P Listen state
2596 * operations for drivers that generate the Probe Response frames
2678 * Probe Request frames may also be requested to be reported by calling
2707 * probe_req_report - Request Probe Request frames to be indicated
2709 * @report: Whether to report received Probe Request frames
2713 * Probe Request frames are received with EVENT_RX_PROBE_REQ events.
2716 * Probe Request reporting at least in station mode. This command is
2717 * used to notify the driver when the Probe Request frames need to be
3106 * poll_client - Probe (null data or such) the given station
3109 * @addr: MAC address of the station to probe
3605 * association frames and Beacon/Probe Response frames in union
3767 * EVENT_RX_PROBE_REQ - Indicate received Probe Request frame
3769 * This event is used to indicate when a Probe Request frame has been
3774 * in station mode. In AP mode, Probe Request frames should always be
4116 * beacon_ies - Beacon or Probe Response IEs
4119 * Probe Response frames from the current AP (i.e., the one
4508 * sa - Source address of the received Probe Request frame
4513 * da - Destination address of the received Probe Request frame
4519 * bssid - BSSID of the received Probe Request frame or %NULL
4525 * ie - IEs from the Probe Request body
