Lines Matching refs:network
19 # file whenever configuration is changed (e.g., new network block is added with
26 # global configuration (shared by all network blocks)
46 # possible to run wpa_supplicant as root (since it needs to change network
49 # change the network configuration, this access needs to be protected in many
95 # the currently enabled networks are found, a new network (IBSS or AP mode
107 # the network blocks in the configuration file are tried one by one until
108 # the driver reports successful association; each network block should have
113 # For finding networks using hidden SSID, scan_ssid=1 in the network block can
115 # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
118 # networks are found, a new IBSS or AP mode network is created.
121 # Whether to force passive scan for network connection
130 # for network connection cases. It should be noted that this will slow
194 # loaded here before being used in the network blocks. By default, EAP methods
253 # 6-0050F204-1 (Network Infrastructure / AP)
295 # This priority value will be set to each network profile that is added
356 # with the global okc=1 parameter or with the per-network
358 # can be disabled with per-network proactive_key_caching=0 parameter.
364 # parameter or with the per-network ieee80211w=1/2 parameter. With pmf=1/2, PMF
365 # is enabled/required by default, but can be disabled with the per-network
377 # Default value for DTIM period (if not overridden in network block)
380 # Default value for Beacon interval (if not overridden in network block)
409 # the per-network mac_addr parameter. Global mac_addr=1 can be used to
433 # Automatic network selection behavior
434 # 0 = do not automatically go through Interworking network selection
436 # 1 = perform Interworking network selection if one or more
438 # matching network block
443 # Each credential used for automatic network selection is configured as a set
454 # (and similarly in struct wpa_ssid for network blocks) to change the
456 # network (based on either an enabled network block or a credential)
463 # username: Username for Interworking network selection
465 # password: Password for Interworking network selection
467 # ca_cert: CA certificate for Interworking network selection
519 # Consortium to match the network, the EAP parameters need to be
536 # matching with the network. Multiple entries can be used to specify more
565 # This value is used as the maximum channel utilization for network
573 # a roaming network shall support (include explicitly in Connection
576 # network connection. This policy is not used in home networks.
658 # network block
660 # Each network (usually AP's sharing the same SSID) is configured as a separate
661 # block in this configuration file. The network blocks are in preference order
664 # network block fields:
667 # 0 = this network can be used (default)
668 # 1 = this network block is disabled (can be enabled through ctrl_iface,
671 # id_str: Network identifier string for external scripts. This value is passed
673 # variable to make it easier to do network specific configuration.
675 # ssid: SSID (mandatory); network name in one of the optional formats:
686 # bssid: BSSID (optional); if set, this network block is used only when
694 # priority value, the sooner the network is matched against the scan results).
708 # deprecated. WPA-None requires following network block options:
716 # an IBSS network with the configured SSID is already present, the frequency of
717 # the network will be used instead of this configured value.
723 # in IEEE 802.11ad network.
728 # BSS. If the subset of channels used by the network is known, this option can
729 # be used to optimize scanning to not occur on channels that the network does
737 # This can also be set on the outside of the network block. In this case,
744 # single network block with all the APs using the same SSID). The bgscan
751 # learn - Learn channels used by the network and try to avoid bgscans on other
759 # This option can also be set outside of all network blocks for the bgscan
802 # LEAP = LEAP/Network EAP (only used with LEAP)
1103 # small enough to make the EAP messages fit in MTU of the network
1260 network={
1268 network={
1276 network={
1287 network={
1299 network={
1316 network={
1330 network={
1343 network={
1356 network={
1374 network={
1386 network={
1393 network={
1403 network={
1416 network={
1430 network={
1439 network={
1448 network={
1459 network={
1471 network={
1478 network={
1491 network={
1503 # IBSS/ad-hoc network with RSN
1504 network={
1515 # IBSS/ad-hoc network with WPA-None/TKIP (deprecated)
1516 network={
1527 # open mesh network
1528 network={
1535 # secure (SAE + AMPE) network
1536 network={
1546 network={
1564 network={
1597 network={
1615 network={
1620 # for this network.
1621 network={
1629 network={
1637 network={
1643 #network={
