1 /* m68hc11.h -- Header file for Motorola 68HC11 & 68HC12 opcode table 2 Copyright (C) 1999-2014 Free Software Foundation, Inc. 3 Written by Stephane Carrez (stcarrez (at) nerim.fr) 4 5 This file is part of GDB, GAS, and the GNU binutils. 6 7 GDB, GAS, and the GNU binutils are free software; you can redistribute 8 them and/or modify them under the terms of the GNU General Public 9 License as published by the Free Software Foundation; either version 3, 10 or (at your option) any later version. 11 12 GDB, GAS, and the GNU binutils are distributed in the hope that they 13 will be useful, but WITHOUT ANY WARRANTY; without even the implied 14 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 15 the GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this file; see the file COPYING3. If not, write to the Free 19 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, 20 MA 02110-1301, USA. */ 21 22 #ifndef _OPCODE_M68HC11_H 23 #define _OPCODE_M68HC11_H 24 25 /* Flags for the definition of the 68HC11 & 68HC12 CCR. */ 26 #define M6811_S_BIT 0x80 /* Stop disable */ 27 #define M6811_X_BIT 0x40 /* X-interrupt mask */ 28 #define M6811_H_BIT 0x20 /* Half carry flag */ 29 #define M6811_I_BIT 0x10 /* I-interrupt mask */ 30 #define M6811_N_BIT 0x08 /* Negative */ 31 #define M6811_Z_BIT 0x04 /* Zero */ 32 #define M6811_V_BIT 0x02 /* Overflow */ 33 #define M6811_C_BIT 0x01 /* Carry */ 34 35 /* 68HC11 register address offsets (range 0..0x3F or 0..64). 36 The absolute address of the I/O register depends on the setting 37 of the M6811_INIT register. At init time, the I/O registers are 38 mapped at 0x1000. Address of registers is then: 39 40 0x1000 + M6811_xxx. */ 41 #define M6811_PORTA 0x00 /* Port A register */ 42 #define M6811__RES1 0x01 /* Unused/Reserved */ 43 #define M6811_PIOC 0x02 /* Parallel I/O Control register */ 44 #define M6811_PORTC 0x03 /* Port C register */ 45 #define M6811_PORTB 0x04 /* Port B register */ 46 #define M6811_PORTCL 0x05 /* Alternate latched port C */ 47 #define M6811__RES6 0x06 /* Unused/Reserved */ 48 #define M6811_DDRC 0x07 /* Data direction register for port C */ 49 #define M6811_PORTD 0x08 /* Port D register */ 50 #define M6811_DDRD 0x09 /* Data direction register for port D */ 51 #define M6811_PORTE 0x0A /* Port E input register */ 52 #define M6811_CFORC 0x0B /* Compare Force Register */ 53 #define M6811_OC1M 0x0C /* OC1 Action Mask register */ 54 #define M6811_OC1D 0x0D /* OC1 Action Data register */ 55 #define M6811_TCTN 0x0E /* Timer Counter Register */ 56 #define M6811_TCTN_H 0x0E /* " " " High part */ 57 #define M6811_TCTN_L 0x0F /* " " " Low part */ 58 #define M6811_TIC1 0x10 /* Input capture 1 register */ 59 #define M6811_TIC1_H 0x10 /* " " " High part */ 60 #define M6811_TIC1_L 0x11 /* " " " Low part */ 61 #define M6811_TIC2 0x12 /* Input capture 2 register */ 62 #define M6811_TIC2_H 0x12 /* " " " High part */ 63 #define M6811_TIC2_L 0x13 /* " " " Low part */ 64 #define M6811_TIC3 0x14 /* Input capture 3 register */ 65 #define M6811_TIC3_H 0x14 /* " " " High part */ 66 #define M6811_TIC3_L 0x15 /* " " " Low part */ 67 #define M6811_TOC1 0x16 /* Output Compare 1 register */ 68 #define M6811_TOC1_H 0x16 /* " " " High part */ 69 #define M6811_TOC1_L 0x17 /* " " " Low part */ 70 #define M6811_TOC2 0x18 /* Output Compare 2 register */ 71 #define M6811_TOC2_H 0x18 /* " " " High part */ 72 #define M6811_TOC2_L 0x19 /* " " " Low part */ 73 #define M6811_TOC3 0x1A /* Output Compare 3 register */ 74 #define M6811_TOC3_H 0x1A /* " " " High part */ 75 #define M6811_TOC3_L 0x1B /* " " " Low part */ 76 #define M6811_TOC4 0x1C /* Output Compare 4 register */ 77 #define M6811_TOC4_H 0x1C /* " " " High part */ 78 #define M6811_TOC4_L 0x1D /* " " " Low part */ 79 #define M6811_TOC5 0x1E /* Output Compare 5 register */ 80 #define M6811_TOC5_H 0x1E /* " " " High part */ 81 #define M6811_TOC5_L 0x1F /* " " " Low part */ 82 #define M6811_TCTL1 0x20 /* Timer Control register 1 */ 83 #define M6811_TCTL2 0x21 /* Timer Control register 2 */ 84 #define M6811_TMSK1 0x22 /* Timer Interrupt Mask Register 1 */ 85 #define M6811_TFLG1 0x23 /* Timer Interrupt Flag Register 1 */ 86 #define M6811_TMSK2 0x24 /* Timer Interrupt Mask Register 2 */ 87 #define M6811_TFLG2 0x25 /* Timer Interrupt Flag Register 2 */ 88 #define M6811_PACTL 0x26 /* Pulse Accumulator Control Register */ 89 #define M6811_PACNT 0x27 /* Pulse Accumulator Count Register */ 90 #define M6811_SPCR 0x28 /* SPI Control register */ 91 #define M6811_SPSR 0x29 /* SPI Status register */ 92 #define M6811_SPDR 0x2A /* SPI Data register */ 93 #define M6811_BAUD 0x2B /* SCI Baud register */ 94 #define M6811_SCCR1 0x2C /* SCI Control register 1 */ 95 #define M6811_SCCR2 0x2D /* SCI Control register 2 */ 96 #define M6811_SCSR 0x2E /* SCI Status register */ 97 #define M6811_SCDR 0x2F /* SCI Data (Read => RDR, Write => TDR) */ 98 #define M6811_ADCTL 0x30 /* A/D Control register */ 99 #define M6811_ADR1 0x31 /* A/D, Analog Result register 1 */ 100 #define M6811_ADR2 0x32 /* A/D, Analog Result register 2 */ 101 #define M6811_ADR3 0x33 /* A/D, Analog Result register 3 */ 102 #define M6811_ADR4 0x34 /* A/D, Analog Result register 4 */ 103 #define M6811__RES35 0x35 104 #define M6811__RES36 0x36 105 #define M6811__RES37 0x37 106 #define M6811__RES38 0x38 107 #define M6811_OPTION 0x39 /* System Configuration Options */ 108 #define M6811_COPRST 0x3A /* Arm/Reset COP Timer Circuitry */ 109 #define M6811_PPROG 0x3B /* EEPROM Programming Control Register */ 110 #define M6811_HPRIO 0x3C /* Highest priority I-Bit int and misc */ 111 #define M6811_INIT 0x3D /* Ram and I/O mapping register */ 112 #define M6811_TEST1 0x3E /* Factory test control register */ 113 #define M6811_CONFIG 0x3F /* COP, ROM and EEPROM enables */ 114 115 116 /* Flags of the CONFIG register (in EEPROM). */ 117 #define M6811_NOSEC 0x08 /* Security mode disable */ 118 #define M6811_NOCOP 0x04 /* COP system disable */ 119 #define M6811_ROMON 0x02 /* Enable on-chip rom */ 120 #define M6811_EEON 0x01 /* Enable on-chip eeprom */ 121 122 /* Flags of the PPROG register. */ 123 #define M6811_BYTE 0x10 /* Byte mode */ 124 #define M6811_ROW 0x08 /* Row mode */ 125 #define M6811_ERASE 0x04 /* Erase mode select (1 = erase, 0 = read) */ 126 #define M6811_EELAT 0x02 /* EEPROM Latch Control */ 127 #define M6811_EEPGM 0x01 /* EEPROM Programming Voltage Enable */ 128 129 /* Flags of the PIOC register. */ 130 #define M6811_STAF 0x80 /* Strobe A Interrupt Status Flag */ 131 #define M6811_STAI 0x40 /* Strobe A Interrupt Enable Mask */ 132 #define M6811_CWOM 0x20 /* Port C Wire OR mode */ 133 #define M6811_HNDS 0x10 /* Handshake mode */ 134 #define M6811_OIN 0x08 /* Output or Input handshaking */ 135 #define M6811_PLS 0x04 /* Pulse/Interlocked Handshake Operation */ 136 #define M6811_EGA 0x02 /* Active Edge for Strobe A */ 137 #define M6811_INVB 0x01 /* Invert Strobe B */ 138 139 /* Flags of the SCCR1 register. */ 140 #define M6811_R8 0x80 /* Receive Data bit 8 */ 141 #define M6811_T8 0x40 /* Transmit data bit 8 */ 142 #define M6811__SCCR1_5 0x20 /* Unused */ 143 #define M6811_M 0x10 /* SCI Character length */ 144 #define M6811_WAKE 0x08 /* Wake up method select (0=idle, 1=addr mark) */ 145 146 /* Flags of the SCCR2 register. */ 147 #define M6811_TIE 0x80 /* Transmit Interrupt enable */ 148 #define M6811_TCIE 0x40 /* Transmit Complete Interrupt Enable */ 149 #define M6811_RIE 0x20 /* Receive Interrupt Enable */ 150 #define M6811_ILIE 0x10 /* Idle Line Interrupt Enable */ 151 #define M6811_TE 0x08 /* Transmit Enable */ 152 #define M6811_RE 0x04 /* Receive Enable */ 153 #define M6811_RWU 0x02 /* Receiver Wake Up */ 154 #define M6811_SBK 0x01 /* Send Break */ 155 156 /* Flags of the SCSR register. */ 157 #define M6811_TDRE 0x80 /* Transmit Data Register Empty */ 158 #define M6811_TC 0x40 /* Transmit Complete */ 159 #define M6811_RDRF 0x20 /* Receive Data Register Full */ 160 #define M6811_IDLE 0x10 /* Idle Line Detect */ 161 #define M6811_OR 0x08 /* Overrun Error */ 162 #define M6811_NF 0x04 /* Noise Flag */ 163 #define M6811_FE 0x02 /* Framing Error */ 164 #define M6811__SCSR_0 0x01 /* Unused */ 165 166 /* Flags of the BAUD register. */ 167 #define M6811_TCLR 0x80 /* Clear Baud Rate (TEST mode) */ 168 #define M6811__BAUD_6 0x40 /* Not used */ 169 #define M6811_SCP1 0x20 /* SCI Baud rate prescaler select */ 170 #define M6811_SCP0 0x10 171 #define M6811_RCKB 0x08 /* Baud Rate Clock Check (TEST mode) */ 172 #define M6811_SCR2 0x04 /* SCI Baud rate select */ 173 #define M6811_SCR1 0x02 174 #define M6811_SCR0 0x01 175 176 #define M6811_BAUD_DIV_1 (0) 177 #define M6811_BAUD_DIV_3 (M6811_SCP0) 178 #define M6811_BAUD_DIV_4 (M6811_SCP1) 179 #define M6811_BAUD_DIV_13 (M6811_SCP1|M6811_SCP0) 180 181 /* Flags of the SPCR register. */ 182 #define M6811_SPIE 0x80 /* Serial Peripheral Interrupt Enable */ 183 #define M6811_SPE 0x40 /* Serial Peripheral System Enable */ 184 #define M6811_DWOM 0x20 /* Port D Wire-OR mode option */ 185 #define M6811_MSTR 0x10 /* Master Mode Select */ 186 #define M6811_CPOL 0x08 /* Clock Polarity */ 187 #define M6811_CPHA 0x04 /* Clock Phase */ 188 #define M6811_SPR1 0x02 /* SPI Clock Rate Select */ 189 #define M6811_SPR0 0x01 190 191 /* Flags of the SPSR register. */ 192 #define M6811_SPIF 0x80 /* SPI Transfer Complete flag */ 193 #define M6811_WCOL 0x40 /* Write Collision */ 194 #define M6811_MODF 0x10 /* Mode Fault */ 195 196 /* Flags of the ADCTL register. */ 197 #define M6811_CCF 0x80 /* Conversions Complete Flag */ 198 #define M6811_SCAN 0x20 /* Continuous Scan Control */ 199 #define M6811_MULT 0x10 /* Multiple Channel/Single Channel Control */ 200 #define M6811_CD 0x08 /* Channel Select D */ 201 #define M6811_CC 0x04 /* C */ 202 #define M6811_CB 0x02 /* B */ 203 #define M6811_CA 0x01 /* A */ 204 205 /* Flags of the CFORC register. */ 206 #define M6811_FOC1 0x80 /* Force Output Compare 1 */ 207 #define M6811_FOC2 0x40 /* 2 */ 208 #define M6811_FOC3 0x20 /* 3 */ 209 #define M6811_FOC4 0x10 /* 4 */ 210 #define M6811_FOC5 0x08 /* 5 */ 211 212 /* Flags of the OC1M register. */ 213 #define M6811_OC1M7 0x80 /* Output Compare 7 */ 214 #define M6811_OC1M6 0x40 /* 6 */ 215 #define M6811_OC1M5 0x20 /* 5 */ 216 #define M6811_OC1M4 0x10 /* 4 */ 217 #define M6811_OC1M3 0x08 /* 3 */ 218 219 /* Flags of the OC1D register. */ 220 #define M6811_OC1D7 0x80 221 #define M6811_OC1D6 0x40 222 #define M6811_OC1D5 0x20 223 #define M6811_OC1D4 0x10 224 #define M6811_OC1D3 0x08 225 226 /* Flags of the TCTL1 register. */ 227 #define M6811_OM2 0x80 /* Output Mode 2 */ 228 #define M6811_OL2 0x40 /* Output Level 2 */ 229 #define M6811_OM3 0x20 230 #define M6811_OL3 0x10 231 #define M6811_OM4 0x08 232 #define M6811_OL4 0x04 233 #define M6811_OM5 0x02 234 #define M6811_OL5 0x01 235 236 /* Flags of the TCTL2 register. */ 237 #define M6811_EDG1B 0x20 /* Input Edge Capture Control 1 */ 238 #define M6811_EDG1A 0x10 239 #define M6811_EDG2B 0x08 /* Input 2 */ 240 #define M6811_EDG2A 0x04 241 #define M6811_EDG3B 0x02 /* Input 3 */ 242 #define M6811_EDG3A 0x01 243 244 /* Flags of the TMSK1 register. */ 245 #define M6811_OC1I 0x80 /* Output Compare 1 Interrupt */ 246 #define M6811_OC2I 0x40 /* 2 */ 247 #define M6811_OC3I 0x20 /* 3 */ 248 #define M6811_OC4I 0x10 /* 4 */ 249 #define M6811_OC5I 0x08 /* 5 */ 250 #define M6811_IC1I 0x04 /* Input Capture 1 Interrupt */ 251 #define M6811_IC2I 0x02 /* 2 */ 252 #define M6811_IC3I 0x01 /* 3 */ 253 254 /* Flags of the TFLG1 register. */ 255 #define M6811_OC1F 0x80 /* Output Compare 1 Flag */ 256 #define M6811_OC2F 0x40 /* 2 */ 257 #define M6811_OC3F 0x20 /* 3 */ 258 #define M6811_OC4F 0x10 /* 4 */ 259 #define M6811_OC5F 0x08 /* 5 */ 260 #define M6811_IC1F 0x04 /* Input Capture 1 Flag */ 261 #define M6811_IC2F 0x02 /* 2 */ 262 #define M6811_IC3F 0x01 /* 3 */ 263 264 /* Flags of Timer Interrupt Mask Register 2 (TMSK2). */ 265 #define M6811_TOI 0x80 /* Timer Overflow Interrupt Enable */ 266 #define M6811_RTII 0x40 /* RTI Interrupt Enable */ 267 #define M6811_PAOVI 0x20 /* Pulse Accumulator Overflow Interrupt En. */ 268 #define M6811_PAII 0x10 /* Pulse Accumulator Interrupt Enable */ 269 #define M6811_PR1 0x02 /* Timer prescaler */ 270 #define M6811_PR0 0x01 /* Timer prescaler */ 271 #define M6811_TPR_1 0x00 /* " " prescale div 1 */ 272 #define M6811_TPR_4 0x01 /* " " prescale div 4 */ 273 #define M6811_TPR_8 0x02 /* " " prescale div 8 */ 274 #define M6811_TPR_16 0x03 /* " " prescale div 16 */ 275 276 /* Flags of Timer Interrupt Flag Register 2 (M6811_TFLG2). */ 277 #define M6811_TOF 0x80 /* Timer overflow bit */ 278 #define M6811_RTIF 0x40 /* Read time interrupt flag */ 279 #define M6811_PAOVF 0x20 /* Pulse accumulator overflow Interrupt flag */ 280 #define M6811_PAIF 0x10 /* Pulse accumulator Input Edge " " " */ 281 282 /* Flags of Pulse Accumulator Control Register (PACTL). */ 283 #define M6811_DDRA7 0x80 /* Data direction for port A bit 7 */ 284 #define M6811_PAEN 0x40 /* Pulse accumulator system enable */ 285 #define M6811_PAMOD 0x20 /* Pulse accumulator mode */ 286 #define M6811_PEDGE 0x10 /* Pulse accumulator edge control */ 287 #define M6811_RTR1 0x02 /* RTI Interrupt rates select */ 288 #define M6811_RTR0 0x01 /* " " " " */ 289 290 /* Flags of the Options register. */ 291 #define M6811_ADPU 0x80 /* A/D Powerup */ 292 #define M6811_CSEL 0x40 /* A/D/EE Charge pump clock source select */ 293 #define M6811_IRQE 0x20 /* IRQ Edge/Level sensitive */ 294 #define M6811_DLY 0x10 /* Stop exit turn on delay */ 295 #define M6811_CME 0x08 /* Clock Monitor enable */ 296 #define M6811_CR1 0x02 /* COP timer rate select */ 297 #define M6811_CR0 0x01 /* COP timer rate select */ 298 299 /* Flags of the HPRIO register. */ 300 #define M6811_RBOOT 0x80 /* Read Bootstrap ROM */ 301 #define M6811_SMOD 0x40 /* Special Mode */ 302 #define M6811_MDA 0x20 /* Mode Select A */ 303 #define M6811_IRV 0x10 /* Internal Read Visibility */ 304 #define M6811_PSEL3 0x08 /* Priority Select */ 305 #define M6811_PSEL2 0x04 306 #define M6811_PSEL1 0x02 307 #define M6811_PSEL0 0x01 308 309 /* Some insns used by gas to turn relative branches into absolute ones. */ 310 #define M6811_BRA 0x20 311 #define M6811_JMP 0x7e 312 #define M6811_BSR 0x8d 313 #define M6811_JSR 0xbd 314 #define M6812_JMP 0x06 315 #define M6812_BSR 0x07 316 #define M6812_JSR 0x16 317 318 /* Instruction code pages. Code page 1 is the default. */ 319 /*#define M6811_OPCODE_PAGE1 0x00*/ 320 #define M6811_OPCODE_PAGE2 0x18 321 #define M6811_OPCODE_PAGE3 0x1A 322 #define M6811_OPCODE_PAGE4 0xCD 323 324 325 /* 68HC11 operands formats as stored in the m6811_opcode table. These 326 flags do not correspond to anything in the 68HC11 or 68HC12. 327 They are only used by GAS to recognize operands. */ 328 #define M6811_OP_NONE 0 /* No operand */ 329 #define M6811_OP_DIRECT 0x0001 /* Page 0 addressing: *<val-8bits> */ 330 #define M6811_OP_IMM8 0x0002 /* 8 bits immediat: #<val-8bits> */ 331 #define M6811_OP_IMM16 0x0004 /* 16 bits immediat: #<val-16bits> */ 332 #define M6811_OP_IND16 0x0008 /* Indirect abs: <val-16> */ 333 #define M6812_OP_IND16_P2 0x0010 /* Second parameter indirect abs. */ 334 #define M6812_OP_REG 0x0020 /* Register operand 1 */ 335 #define M6812_OP_REG_2 0x0040 /* Register operand 2 */ 336 337 #define M6811_OP_IX 0x0080 /* Indirect IX: <val-8>,x */ 338 #define M6811_OP_IY 0x0100 /* Indirect IY: <val-8>,y */ 339 #define M6812_OP_IDX 0x0200 /* Indirect: N,r N,[+-]r[+-] N:5-bits */ 340 #define M6812_OP_IDX_1 0x0400 /* N,r N:9-bits */ 341 #define M6812_OP_IDX_2 0x0800 /* N,r N:16-bits */ 342 #define M6812_OP_D_IDX 0x1000 /* Indirect indexed: [D,r] */ 343 #define M6812_OP_D_IDX_2 0x2000 /* [N,r] N:16-bits */ 344 #define M6812_OP_PAGE 0x4000 /* Page number */ 345 #define M6811_OP_MASK 0x07FFF 346 #define M6811_OP_BRANCH 0x00008000 /* Branch, jsr, call */ 347 #define M6811_OP_BITMASK 0x00010000 /* Bitmask: #<val-8> */ 348 #define M6811_OP_JUMP_REL 0x00020000 /* Pc-Relative: <val-8> */ 349 #define M6812_OP_JUMP_REL16 0x00040000 /* Pc-relative: <val-16> */ 350 #define M6811_OP_PAGE1 0x0000 351 #define M6811_OP_PAGE2 0x00080000 /* Need a page2 opcode before */ 352 #define M6811_OP_PAGE3 0x00100000 /* Need a page3 opcode before */ 353 #define M6811_OP_PAGE4 0x00200000 /* Need a page4 opcode before */ 354 #define M6811_MAX_OPERANDS 3 /* Max operands: brset <dst> <mask> <b> */ 355 356 #define M6812_ACC_OFFSET 0x00400000 /* A,r B,r D,r */ 357 #define M6812_ACC_IND 0x00800000 /* [D,r] */ 358 #define M6812_PRE_INC 0x01000000 /* n,+r n = -8..8 */ 359 #define M6812_PRE_DEC 0x02000000 /* n,-r */ 360 #define M6812_POST_INC 0x04000000 /* n,r+ */ 361 #define M6812_POST_DEC 0x08000000 /* n,r- */ 362 #define M6812_INDEXED_IND 0x10000000 /* [n,r] n = 16-bits */ 363 #define M6812_INDEXED 0x20000000 /* n,r n = 5, 9 or 16-bits */ 364 #define M6812_OP_IDX_P2 0x40000000 365 366 /* XGATE defines. 367 These overlap with HC11/12 as above but not used at the same time. */ 368 #define M68XG_OP_NONE 0x0001 369 #define M68XG_OP_IMM3 0x0002 370 #define M68XG_OP_R 0x0004 371 #define M68XG_OP_R_R 0x0008 372 #define M68XG_OP_R_IMM4 0x0010 373 #define M68XG_OP_R_R_R 0x0020 374 #define M68XG_OP_REL9 0x0040 375 #define M68XG_OP_REL10 0x0080 376 #define M68XG_OP_R_R_OFFS5 0x0100 377 #define M68XG_OP_RD_RB_RI 0x0200 378 #define M68XG_OP_RD_RB_RIp 0x0400 379 #define M68XG_OP_RD_RB_mRI 0x0800 380 #define M68XG_OP_R_IMM8 0x1000 381 #define M68XG_OP_R_IMM16 0x2000 382 #define M68XG_OP_REG 0x4000 /* Register operand 1. */ 383 #define M68XG_OP_REG_2 0x8000 /* Register operand 2. */ 384 #define M68XG_MAX_OPERANDS 3 /* Max operands of triadic r1, r2, r3. */ 385 386 /* Markers to identify some instructions. */ 387 #define M6812_OP_EXG_MARKER 0x01000000 /* exg r1,r2 */ 388 #define M6812_OP_TFR_MARKER 0x02000000 /* tfr r1,r2 */ 389 #define M6812_OP_SEX_MARKER 0x04000000 /* sex r1,r2 */ 390 391 #define M6812_OP_EQ_MARKER 0x80000000 /* dbeq/ibeq/tbeq */ 392 #define M6812_OP_DBCC_MARKER 0x04000000 /* dbeq/dbne */ 393 #define M6812_OP_IBCC_MARKER 0x02000000 /* ibeq/ibne */ 394 #define M6812_OP_TBCC_MARKER 0x01000000 395 396 /* XGATE markers. */ 397 #define M68XG_OP_B_MARKER 0x04000000 /* bXX rel9 */ 398 #define M68XG_OP_BRA_MARKER 0x02000000 /* bra rel10 */ 399 400 #define M6812_OP_TRAP_ID 0x80000000 /* trap #N */ 401 402 #define M6811_OP_HIGH_ADDR 0x01000000 /* Used internally by gas. */ 403 #define M6811_OP_LOW_ADDR 0x02000000 404 405 #define M68HC12_BANK_VIRT 0x010000 406 #define M68HC12_BANK_MASK 0x00003fff 407 #define M68HC12_BANK_BASE 0x00008000 408 #define M68HC12_BANK_SHIFT 14 409 #define M68HC12_BANK_PAGE_MASK 0x0ff 410 411 412 /* CPU identification. */ 413 #define cpu6811 0x01 414 #define cpu6812 0x02 415 #define cpu6812s 0x04 416 #define cpu9s12x 0x08 /* 9S12X main cpu. */ 417 #define cpuxgate 0x10 /* The XGATE module itself. */ 418 419 /* The opcode table is an array of struct m68hc11_opcode. */ 420 struct m68hc11_opcode 421 { 422 const char * name; /* Op-code name. */ 423 long format; 424 unsigned char size; 425 unsigned int opcode; 426 unsigned char cycles_low; 427 unsigned char cycles_high; 428 unsigned char set_flags_mask; 429 unsigned char clr_flags_mask; 430 unsigned char chg_flags_mask; 431 unsigned char arch; 432 unsigned int xg_mask; /* Mask with zero in register place for xgate. */ 433 }; 434 435 /* Alias definition for 68HC12. */ 436 struct m68hc12_opcode_alias 437 { 438 const char* name; 439 const char* translation; 440 unsigned char size; 441 unsigned char code1; 442 unsigned char code2; 443 }; 444 445 /* The opcode table. The table contains all the opcodes (all pages). 446 You can't rely on the order. */ 447 extern const struct m68hc11_opcode m68hc11_opcodes[]; 448 extern const int m68hc11_num_opcodes; 449 450 /* Alias table for 68HC12. It translates some 68HC11 insn which are not 451 implemented in 68HC12 but have equivalent translations. */ 452 extern const struct m68hc12_opcode_alias m68hc12_alias[]; 453 extern const int m68hc12_num_alias; 454 455 #endif /* _OPCODE_M68HC11_H */ 456
