1 /****************************************************************************** 2 * 3 * Copyright (C) 2003-2014 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This is the public interface file for BTA, Broadcom's Bluetooth 22 * application layer for mobile phones. 23 * 24 ******************************************************************************/ 25 #ifndef BTA_API_H 26 #define BTA_API_H 27 28 #include "bt_target.h" 29 #include "bt_types.h" 30 #include "btm_api.h" 31 32 #if BLE_INCLUDED == TRUE 33 #include "btm_ble_api.h" 34 #endif 35 36 /***************************************************************************** 37 ** Constants and data types 38 *****************************************************************************/ 39 40 /* Status Return Value */ 41 #define BTA_SUCCESS 0 /* Successful operation. */ 42 #define BTA_FAILURE 1 /* Generic failure. */ 43 #define BTA_PENDING 2 /* API cannot be completed right now */ 44 #define BTA_BUSY 3 45 #define BTA_NO_RESOURCES 4 46 #define BTA_WRONG_MODE 5 47 48 typedef UINT8 tBTA_STATUS; 49 50 /* 51 * Service ID 52 * 53 * NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID, 54 * make sure that the correct security ID of the new service from Security service definitions (btm_api.h) 55 * should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c. 56 */ 57 58 #define BTA_RES_SERVICE_ID 0 /* Reserved */ 59 #define BTA_SPP_SERVICE_ID 1 /* Serial port profile. */ 60 #define BTA_DUN_SERVICE_ID 2 /* Dial-up networking profile. */ 61 #define BTA_A2DP_SOURCE_SERVICE_ID 3 /* A2DP Source profile. */ 62 #define BTA_LAP_SERVICE_ID 4 /* LAN access profile. */ 63 #define BTA_HSP_SERVICE_ID 5 /* Headset profile. */ 64 #define BTA_HFP_SERVICE_ID 6 /* Hands-free profile. */ 65 #define BTA_OPP_SERVICE_ID 7 /* Object push */ 66 #define BTA_FTP_SERVICE_ID 8 /* File transfer */ 67 #define BTA_CTP_SERVICE_ID 9 /* Cordless Terminal */ 68 #define BTA_ICP_SERVICE_ID 10 /* Intercom Terminal */ 69 #define BTA_SYNC_SERVICE_ID 11 /* Synchronization */ 70 #define BTA_BPP_SERVICE_ID 12 /* Basic printing profile */ 71 #define BTA_BIP_SERVICE_ID 13 /* Basic Imaging profile */ 72 #define BTA_PANU_SERVICE_ID 14 /* PAN User */ 73 #define BTA_NAP_SERVICE_ID 15 /* PAN Network access point */ 74 #define BTA_GN_SERVICE_ID 16 /* PAN Group Ad-hoc networks */ 75 #define BTA_SAP_SERVICE_ID 17 /* SIM Access profile */ 76 #define BTA_A2DP_SINK_SERVICE_ID 18 /* A2DP Sink */ 77 #define BTA_AVRCP_SERVICE_ID 19 /* A/V remote control */ 78 #define BTA_HID_SERVICE_ID 20 /* HID */ 79 #define BTA_VDP_SERVICE_ID 21 /* Video distribution */ 80 #define BTA_PBAP_SERVICE_ID 22 /* PhoneBook Access Server*/ 81 #define BTA_HSP_HS_SERVICE_ID 23 /* HFP HS role */ 82 #define BTA_HFP_HS_SERVICE_ID 24 /* HSP HS role */ 83 #define BTA_MAP_SERVICE_ID 25 /* Message Access Profile */ 84 #define BTA_MN_SERVICE_ID 26 /* Message Notification Service */ 85 #define BTA_HDP_SERVICE_ID 27 /* Health Device Profile */ 86 #define BTA_PCE_SERVICE_ID 28 /* PhoneBook Access Client*/ 87 #define BTA_SDP_SERVICE_ID 29 /* SDP Search*/ 88 #if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE 89 /* BLE profile service ID */ 90 #define BTA_BLE_SERVICE_ID 30 /* GATT profile */ 91 92 #define BTA_USER_SERVICE_ID 31 /* User requested UUID */ 93 94 #define BTA_MAX_SERVICE_ID 32 95 #else 96 #define BTA_USER_SERVICE_ID 30 /* User requested UUID */ 97 #define BTA_MAX_SERVICE_ID 31 98 #endif 99 /* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1) 100 * are used by BTA JV */ 101 #define BTA_FIRST_JV_SERVICE_ID (BTM_SEC_SERVICE_FIRST_EMPTY + 1) 102 #define BTA_LAST_JV_SERVICE_ID (BTM_SEC_MAX_SERVICES - 1) 103 104 typedef UINT8 tBTA_SERVICE_ID; 105 106 /* Service ID Mask */ 107 #define BTA_RES_SERVICE_MASK 0x00000001 /* Reserved */ 108 #define BTA_SPP_SERVICE_MASK 0x00000002 /* Serial port profile. */ 109 #define BTA_DUN_SERVICE_MASK 0x00000004 /* Dial-up networking profile. */ 110 #define BTA_FAX_SERVICE_MASK 0x00000008 /* Fax profile. */ 111 #define BTA_LAP_SERVICE_MASK 0x00000010 /* LAN access profile. */ 112 #define BTA_HSP_SERVICE_MASK 0x00000020 /* HSP AG role. */ 113 #define BTA_HFP_SERVICE_MASK 0x00000040 /* HFP AG role */ 114 #define BTA_OPP_SERVICE_MASK 0x00000080 /* Object push */ 115 #define BTA_FTP_SERVICE_MASK 0x00000100 /* File transfer */ 116 #define BTA_CTP_SERVICE_MASK 0x00000200 /* Cordless Terminal */ 117 #define BTA_ICP_SERVICE_MASK 0x00000400 /* Intercom Terminal */ 118 #define BTA_SYNC_SERVICE_MASK 0x00000800 /* Synchronization */ 119 #define BTA_BPP_SERVICE_MASK 0x00001000 /* Print server */ 120 #define BTA_BIP_SERVICE_MASK 0x00002000 /* Basic Imaging */ 121 #define BTA_PANU_SERVICE_MASK 0x00004000 /* PAN User */ 122 #define BTA_NAP_SERVICE_MASK 0x00008000 /* PAN Network access point */ 123 #define BTA_GN_SERVICE_MASK 0x00010000 /* PAN Group Ad-hoc networks */ 124 #define BTA_SAP_SERVICE_MASK 0x00020000 /* PAN Group Ad-hoc networks */ 125 #define BTA_A2DP_SERVICE_MASK 0x00040000 /* Advanced audio distribution */ 126 #define BTA_AVRCP_SERVICE_MASK 0x00080000 /* A/V remote control */ 127 #define BTA_HID_SERVICE_MASK 0x00100000 /* HID */ 128 #define BTA_VDP_SERVICE_MASK 0x00200000 /* Video distribution */ 129 #define BTA_PBAP_SERVICE_MASK 0x00400000 /* Phone Book Server */ 130 #define BTA_HSP_HS_SERVICE_MASK 0x00800000 /* HFP HS role */ 131 #define BTA_HFP_HS_SERVICE_MASK 0x01000000 /* HSP HS role */ 132 #define BTA_MAS_SERVICE_MASK 0x02000000 /* Message Access Profile */ 133 #define BTA_MN_SERVICE_MASK 0x04000000 /* Message Notification Profile */ 134 #define BTA_HL_SERVICE_MASK 0x08000000 /* Health Device Profile */ 135 #define BTA_PCE_SERVICE_MASK 0x10000000 /* Phone Book Client */ 136 137 #if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE 138 #define BTA_BLE_SERVICE_MASK 0x20000000 /* GATT based service */ 139 #define BTA_USER_SERVICE_MASK 0x40000000 /* Message Notification Profile */ 140 #else 141 #define BTA_USER_SERVICE_MASK 0x20000000 /* Message Notification Profile */ 142 #endif 143 144 #if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE 145 #define BTA_ALL_SERVICE_MASK 0x3FFFFFFF /* All services supported by BTA. */ 146 #else 147 #define BTA_ALL_SERVICE_MASK 0x1FFFFFFF /* All services supported by BTA. */ 148 #endif 149 150 typedef UINT32 tBTA_SERVICE_MASK; 151 152 /* extended service mask, including mask with one or more GATT UUID */ 153 typedef struct 154 { 155 tBTA_SERVICE_MASK srvc_mask; 156 UINT8 num_uuid; 157 tBT_UUID *p_uuid; 158 }tBTA_SERVICE_MASK_EXT; 159 160 /* Security Setting Mask */ 161 #define BTA_SEC_NONE BTM_SEC_NONE /* No security. */ 162 #define BTA_SEC_AUTHORIZE (BTM_SEC_IN_AUTHORIZE ) /* Authorization required (only needed for out going connection )*/ 163 #define BTA_SEC_AUTHENTICATE (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */ 164 #define BTA_SEC_ENCRYPT (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */ 165 #define BTA_SEC_MODE4_LEVEL4 (BTM_SEC_MODE4_LEVEL4) /* Mode 4 level 4 service, i.e. incoming/outgoing MITM and P-256 encryption */ 166 #define BTA_SEC_MITM (BTM_SEC_IN_MITM | BTM_SEC_OUT_MITM) /* Man-In-The_Middle protection */ 167 #define BTA_SEC_IN_16_DIGITS (BTM_SEC_IN_MIN_16_DIGIT_PIN) /* Min 16 digit for pin code */ 168 169 typedef UINT16 tBTA_SEC; 170 171 /* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only device modes */ 172 #define BTA_DM_IGNORE 0x00FF 173 174 /* Ignore for Discoverable, Connectable only for LE modes */ 175 #define BTA_DM_LE_IGNORE 0xFF00 176 177 #define BTA_APP_ID_PAN_MULTI 0xFE /* app id for pan multiple connection */ 178 #define BTA_ALL_APP_ID 0xFF 179 180 /* Discoverable Modes */ 181 #define BTA_DM_NON_DISC BTM_NON_DISCOVERABLE /* Device is not discoverable. */ 182 #define BTA_DM_GENERAL_DISC BTM_GENERAL_DISCOVERABLE /* General discoverable. */ 183 #define BTA_DM_LIMITED_DISC BTM_LIMITED_DISCOVERABLE /* Limited discoverable. */ 184 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 185 #define BTA_DM_BLE_NON_DISCOVERABLE BTM_BLE_NON_DISCOVERABLE /* Device is not LE discoverable */ 186 #define BTA_DM_BLE_GENERAL_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE /* Device is LE General discoverable */ 187 #define BTA_DM_BLE_LIMITED_DISCOVERABLE BTM_BLE_LIMITED_DISCOVERABLE /* Device is LE Limited discoverable */ 188 #endif 189 typedef UINT16 tBTA_DM_DISC; /* this discoverability mode is a bit mask among BR mode and LE mode */ 190 191 /* Connectable Modes */ 192 #define BTA_DM_NON_CONN BTM_NON_CONNECTABLE /* Device is not connectable. */ 193 #define BTA_DM_CONN BTM_CONNECTABLE /* Device is connectable. */ 194 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 195 #define BTA_DM_BLE_NON_CONNECTABLE BTM_BLE_NON_CONNECTABLE /* Device is LE non-connectable. */ 196 #define BTA_DM_BLE_CONNECTABLE BTM_BLE_CONNECTABLE /* Device is LE connectable. */ 197 #endif 198 199 typedef UINT16 tBTA_DM_CONN; 200 201 #define BTA_TRANSPORT_UNKNOWN 0 202 #define BTA_TRANSPORT_BR_EDR BT_TRANSPORT_BR_EDR 203 #define BTA_TRANSPORT_LE BT_TRANSPORT_LE 204 typedef tBT_TRANSPORT tBTA_TRANSPORT; 205 206 /* Pairable Modes */ 207 #define BTA_DM_PAIRABLE 1 208 #define BTA_DM_NON_PAIRABLE 0 209 210 /* Connectable Paired Only Mode */ 211 #define BTA_DM_CONN_ALL 0 212 #define BTA_DM_CONN_PAIRED 1 213 214 /* Inquiry Modes */ 215 #define BTA_DM_INQUIRY_NONE BTM_INQUIRY_NONE /*No BR inquiry. */ 216 #define BTA_DM_GENERAL_INQUIRY BTM_GENERAL_INQUIRY /* Perform general inquiry. */ 217 #define BTA_DM_LIMITED_INQUIRY BTM_LIMITED_INQUIRY /* Perform limited inquiry. */ 218 219 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 220 #define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE 221 #define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */ 222 #define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */ 223 #endif 224 typedef UINT8 tBTA_DM_INQ_MODE; 225 226 /* Inquiry Filter Type */ 227 #define BTA_DM_INQ_CLR BTM_CLR_INQUIRY_FILTER /* Clear inquiry filter. */ 228 #define BTA_DM_INQ_DEV_CLASS BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class. */ 229 #define BTA_DM_INQ_BD_ADDR BTM_FILTER_COND_BD_ADDR /* Filter on a specific BD address. */ 230 231 typedef UINT8 tBTA_DM_INQ_FILT; 232 233 /* Authorize Response */ 234 #define BTA_DM_AUTH_PERM 0 /* Authorized for future connections to the service */ 235 #define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */ 236 #define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */ 237 238 typedef UINT8 tBTA_AUTH_RESP; 239 240 /* M/S preferred roles */ 241 #define BTA_ANY_ROLE 0x00 242 #define BTA_MASTER_ROLE_PREF 0x01 243 #define BTA_MASTER_ROLE_ONLY 0x02 244 #define BTA_SLAVE_ROLE_ONLY 0x03 /* Used for PANU only, skip role switch to master */ 245 246 typedef UINT8 tBTA_PREF_ROLES; 247 248 enum 249 { 250 251 BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might 252 support "role switch during connection" for 253 an incoming connection, when it already has 254 another connection in master role */ 255 BTA_DM_PARTIAL_SCATTERNET, /* Device supports partial scatternet. It can have 256 simulateous connection in Master and Slave roles 257 for short period of time */ 258 BTA_DM_FULL_SCATTERNET /* Device can have simultaneous connection in master 259 and slave roles */ 260 261 }; 262 263 264 /* Inquiry filter device class condition */ 265 typedef struct 266 { 267 DEV_CLASS dev_class; /* device class of interest */ 268 DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of interest */ 269 } tBTA_DM_COD_COND; 270 271 272 /* Inquiry Filter Condition */ 273 typedef union 274 { 275 BD_ADDR bd_addr; /* BD address of device to filter. */ 276 tBTA_DM_COD_COND dev_class_cond; /* Device class filter condition */ 277 } tBTA_DM_INQ_COND; 278 279 /* Inquiry Parameters */ 280 typedef struct 281 { 282 tBTA_DM_INQ_MODE mode; /* Inquiry mode, limited or general. */ 283 UINT8 duration; /* Inquiry duration in 1.28 sec units. */ 284 UINT8 max_resps; /* Maximum inquiry responses. Set to zero for unlimited responses. */ 285 BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */ 286 tBTA_DM_INQ_FILT filter_type; /* Filter condition type. */ 287 tBTA_DM_INQ_COND filter_cond; /* Filter condition data. */ 288 #if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 289 UINT8 intl_duration[4];/*duration array storing the interleave scan's time portions*/ 290 #endif 291 } tBTA_DM_INQ; 292 293 typedef struct 294 { 295 UINT8 bta_dm_eir_min_name_len; /* minimum length of local name when it is shortened */ 296 #if (BTA_EIR_CANNED_UUID_LIST == TRUE) 297 UINT8 bta_dm_eir_uuid16_len; /* length of 16-bit UUIDs */ 298 UINT8 *bta_dm_eir_uuid16; /* 16-bit UUIDs */ 299 #else 300 UINT32 uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */ 301 #endif 302 INT8 *bta_dm_eir_inq_tx_power; /* Inquiry TX power */ 303 UINT8 bta_dm_eir_flag_len; /* length of flags in bytes */ 304 UINT8 *bta_dm_eir_flags; /* flags for EIR */ 305 UINT8 bta_dm_eir_manufac_spec_len; /* length of manufacturer specific in bytes */ 306 UINT8 *bta_dm_eir_manufac_spec; /* manufacturer specific */ 307 UINT8 bta_dm_eir_additional_len; /* length of additional data in bytes */ 308 UINT8 *bta_dm_eir_additional; /* additional data */ 309 } tBTA_DM_EIR_CONF; 310 311 #if BLE_INCLUDED == TRUE 312 /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ 313 #define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG 314 #define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG 315 #define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT 316 #define BTA_BLE_DMT_CONTROLLER_SPT BTM_BLE_DMT_CONTROLLER_SPT 317 #define BTA_BLE_DMT_HOST_SPT BTM_BLE_DMT_HOST_SPT 318 #define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG 319 #define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK 320 #define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK 321 322 /* ADV data bit mask */ 323 #define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME 324 #define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS 325 #define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU 326 #define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR 327 #define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE 328 #define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE 329 #define BTA_BLE_AD_BIT_APPEARANCE BTM_BLE_AD_BIT_APPEARANCE 330 #define BTA_BLE_AD_BIT_PROPRIETARY BTM_BLE_AD_BIT_PROPRIETARY 331 #define BTA_DM_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL 332 #define BTA_DM_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA 333 #define BTA_DM_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA 334 #define BTA_DM_BLE_AD_BIT_SERVICE_128SOL BTM_BLE_AD_BIT_SERVICE_128SOL 335 #define BTA_DM_BLE_AD_BIT_PUBLIC_ADDR BTM_BLE_AD_BIT_PUBLIC_ADDR 336 #define BTA_DM_BLE_AD_BIT_RANDOM_ADDR BTM_BLE_AD_BIT_RANDOM_ADDR 337 #define BTA_DM_BLE_AD_BIT_SERVICE_128 BTM_BLE_AD_BIT_SERVICE_128 /*128-bit Service UUIDs*/ 338 339 typedef tBTM_BLE_AD_MASK tBTA_BLE_AD_MASK; 340 typedef tBTM_BLE_INT_RANGE tBTA_BLE_INT_RANGE; 341 typedef tBTM_BLE_SERVICE tBTA_BLE_SERVICE; 342 typedef tBTM_BLE_PROP_ELEM tBTA_BLE_PROP_ELEM; 343 typedef tBTM_BLE_PROPRIETARY tBTA_BLE_PROPRIETARY; 344 typedef tBTM_BLE_MANU tBTA_BLE_MANU; 345 typedef tBTM_BLE_SERVICE_DATA tBTA_BLE_SERVICE_DATA; 346 typedef tBTM_BLE_128SERVICE tBTA_BLE_128SERVICE; 347 typedef tBTM_BLE_32SERVICE tBTA_BLE_32SERVICE; 348 349 typedef struct 350 { 351 tBTA_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ 352 tBTA_BLE_MANU manu; /* manufacturer data */ 353 tBTA_BLE_SERVICE services; /* 16 bits services */ 354 tBTA_BLE_128SERVICE services_128b; /* 128 bits service */ 355 tBTA_BLE_32SERVICE service_32b; /* 32 bits Service UUID */ 356 tBTA_BLE_SERVICE sol_services; /* 16 bits services Solicitation UUIDs */ 357 tBTA_BLE_32SERVICE sol_service_32b; /* List of 32 bit Service Solicitation UUIDs */ 358 tBTA_BLE_128SERVICE sol_service_128b;/* List of 128 bit Service Solicitation UUIDs */ 359 tBTA_BLE_PROPRIETARY proprietary; /* proprietary data */ 360 tBTA_BLE_SERVICE_DATA service_data; /* service data */ 361 UINT16 appearance; /* appearance data */ 362 UINT8 flag; 363 UINT8 tx_power; 364 }tBTA_BLE_ADV_DATA; 365 366 typedef void (tBTA_SET_ADV_DATA_CMPL_CBACK) (tBTA_STATUS status); 367 368 /* advertising channel map */ 369 #define BTA_BLE_ADV_CHNL_37 BTM_BLE_ADV_CHNL_37 370 #define BTA_BLE_ADV_CHNL_38 BTM_BLE_ADV_CHNL_38 371 #define BTA_BLE_ADV_CHNL_39 BTM_BLE_ADV_CHNL_39 372 typedef tBTM_BLE_ADV_CHNL_MAP tBTA_BLE_ADV_CHNL_MAP; /* use as a bit mask */ 373 374 /* advertising filter policy */ 375 typedef tBTM_BLE_AFP tBTA_BLE_AFP; 376 377 /* adv event type */ 378 #define BTA_BLE_CONNECT_EVT BTM_BLE_CONNECT_EVT /* Connectable undirected advertising */ 379 #define BTA_BLE_CONNECT_DIR_EVT BTM_BLE_CONNECT_DIR_EVT /* Connectable directed advertising */ 380 #define BTA_BLE_DISCOVER_EVT BTM_BLE_DISCOVER_EVT /* Scannable undirected advertising */ 381 #define BTA_BLE_NON_CONNECT_EVT BTM_BLE_NON_CONNECT_EVT /* Non connectable undirected advertising */ 382 typedef UINT8 tBTA_BLE_ADV_EVT; 383 384 /* adv tx power level */ 385 #define BTA_BLE_ADV_TX_POWER_MIN 0 /* minimum tx power */ 386 #define BTA_BLE_ADV_TX_POWER_LOW 1 /* low tx power */ 387 #define BTA_BLE_ADV_TX_POWER_MID 2 /* middle tx power */ 388 #define BTA_BLE_ADV_TX_POWER_UPPER 3 /* upper tx power */ 389 #define BTA_BLE_ADV_TX_POWER_MAX 4 /* maximum tx power */ 390 typedef UINT8 tBTA_BLE_ADV_TX_POWER; 391 392 /* advertising instance parameters */ 393 typedef struct 394 { 395 UINT16 adv_int_min; /* minimum adv interval */ 396 UINT16 adv_int_max; /* maximum adv interval */ 397 tBTA_BLE_ADV_EVT adv_type; /* adv event type */ 398 tBTA_BLE_ADV_CHNL_MAP channel_map; /* adv channel map */ 399 tBTA_BLE_AFP adv_filter_policy; /* advertising filter policy */ 400 tBTA_BLE_ADV_TX_POWER tx_power; /* adv tx power */ 401 }tBTA_BLE_ADV_PARAMS; 402 403 /* These are the fields returned in each device adv packet. It 404 ** is returned in the results callback if registered. 405 */ 406 typedef struct 407 { 408 UINT8 conn_mode; 409 tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ 410 UINT8 flag; 411 UINT8 tx_power_level; 412 UINT8 remote_name_len; 413 UINT8 *p_remote_name; 414 tBTA_BLE_SERVICE service; 415 } tBTA_BLE_INQ_DATA; 416 417 enum 418 { 419 BTA_BLE_BATCH_SCAN_MODE_PASS = 1, 420 BTA_BLE_BATCH_SCAN_MODE_ACTI = 2, 421 BTA_BLE_BATCH_SCAN_MODE_PASS_ACTI = 3 422 }; 423 typedef UINT8 tBTA_BLE_BATCH_SCAN_MODE; 424 425 enum 426 { 427 BTA_BLE_DISCARD_OLD_ITEMS=0, 428 BTA_BLE_DISCARD_LOWER_RSSI_ITEMS=1 429 }; 430 typedef UINT8 tBTA_BLE_DISCARD_RULE; 431 432 enum 433 { 434 BTA_BLE_ADV_SEEN_FIRST_TIME=0, 435 BTA_BLE_ADV_TRACKING_TIMEOUT=1 436 }; 437 typedef UINT8 tBTA_BLE_ADV_CHANGE_REASON; 438 439 enum 440 { 441 BTA_BLE_BATCH_SCAN_ENB_EVT = 1, 442 BTA_BLE_BATCH_SCAN_CFG_STRG_EVT = 2, 443 BTA_BLE_BATCH_SCAN_DATA_EVT = 3, 444 BTA_BLE_BATCH_SCAN_THRES_EVT = 4, 445 BTA_BLE_BATCH_SCAN_PARAM_EVT = 5, 446 BTA_BLE_BATCH_SCAN_DIS_EVT = 6 447 }; 448 typedef tBTM_BLE_BATCH_SCAN_EVT tBTA_BLE_BATCH_SCAN_EVT; 449 450 typedef tBTM_BLE_TRACK_ADV_ACTION tBTA_BLE_TRACK_ADV_ACTION; 451 #endif 452 453 /* BLE customer specific feature function type definitions */ 454 /* data type used on customer specific feature for RSSI monitoring */ 455 #define BTA_BLE_RSSI_ALERT_HI 0 456 #define BTA_BLE_RSSI_ALERT_RANGE 1 457 #define BTA_BLE_RSSI_ALERT_LO 2 458 typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_TYPE; 459 460 #define BTA_BLE_RSSI_ALERT_NONE BTM_BLE_RSSI_ALERT_NONE /* (0) */ 461 #define BTA_BLE_RSSI_ALERT_HI_BIT BTM_BLE_RSSI_ALERT_HI_BIT /* (1) */ 462 #define BTA_BLE_RSSI_ALERT_RANGE_BIT BTM_BLE_RSSI_ALERT_RANGE_BIT /* (1 << 1) */ 463 #define BTA_BLE_RSSI_ALERT_LO_BIT BTM_BLE_RSSI_ALERT_LO_BIT /* (1 << 2) */ 464 typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_MASK; 465 466 467 typedef void (tBTA_DM_BLE_RSSI_CBACK) (BD_ADDR bd_addr, tBTA_DM_BLE_RSSI_ALERT_TYPE alert_type, INT8 rssi); 468 469 /* max number of filter spot for different filter type */ 470 #define BTA_DM_BLE_MAX_UUID_FILTER BTM_BLE_MAX_UUID_FILTER /* 8 */ 471 #define BTA_DM_BLE_MAX_ADDR_FILTER BTM_BLE_MAX_ADDR_FILTER /* 8 */ 472 #define BTA_DM_BLE_PF_STR_COND_MAX BTM_BLE_PF_STR_COND_MAX /* 4 apply to manu data , or local name */ 473 #define BTA_DM_BLE_PF_STR_LEN_MAX BTM_BLE_PF_STR_LEN_MAX /* match for first 20 bytes */ 474 475 #define BTA_DM_BLE_PF_LOGIC_OR 0 476 #define BTA_DM_BLE_PF_LOGIC_AND 1 477 typedef UINT8 tBTA_DM_BLE_PF_LOGIC_TYPE; 478 479 enum 480 { 481 BTA_DM_BLE_SCAN_COND_ADD, 482 BTA_DM_BLE_SCAN_COND_DELETE, 483 BTA_DM_BLE_SCAN_COND_CLEAR = 2 484 }; 485 typedef UINT8 tBTA_DM_BLE_SCAN_COND_OP; 486 487 /* ADV payload filtering vendor specific call event */ 488 enum 489 { 490 BTA_BLE_SCAN_PF_ENABLE_EVT = 7, 491 BTA_BLE_SCAN_PF_COND_EVT 492 }; 493 494 /* filter selection bit index */ 495 #define BTA_DM_BLE_PF_ADDR_FILTER BTM_BLE_PF_ADDR_FILTER 496 #define BTA_DM_BLE_PF_SRVC_DATA BTM_BLE_PF_SRVC_DATA 497 #define BTA_DM_BLE_PF_SRVC_UUID BTM_BLE_PF_SRVC_UUID 498 #define BTA_DM_BLE_PF_SRVC_SOL_UUID BTM_BLE_PF_SRVC_SOL_UUID 499 #define BTA_DM_BLE_PF_LOCAL_NAME BTM_BLE_PF_LOCAL_NAME 500 #define BTA_DM_BLE_PF_MANU_DATA BTM_BLE_PF_MANU_DATA 501 #define BTA_DM_BLE_PF_SRVC_DATA_PATTERN BTM_BLE_PF_SRVC_DATA_PATTERN 502 #define BTA_DM_BLE_PF_TYPE_ALL BTM_BLE_PF_TYPE_ALL 503 #define BTA_DM_BLE_PF_TYPE_MAX BTM_BLE_PF_TYPE_MAX 504 typedef UINT8 tBTA_DM_BLE_PF_COND_TYPE; 505 506 typedef union 507 { 508 UINT16 uuid16_mask; 509 UINT32 uuid32_mask; 510 UINT8 uuid128_mask[LEN_UUID_128]; 511 }tBTA_DM_BLE_PF_COND_MASK; 512 513 typedef struct 514 { 515 tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */ 516 tBT_UUID uuid; /* UUID condition */ 517 tBTA_DM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */ 518 tBTA_DM_BLE_PF_COND_MASK *p_uuid_mask; /* UUID condition mask, if NULL, match exact as UUID condition */ 519 }tBTA_DM_BLE_PF_UUID_COND; 520 521 typedef struct 522 { 523 UINT8 data_len; /* <= 20 bytes */ 524 UINT8 *p_data; 525 }tBTA_DM_BLE_PF_LOCAL_NAME_COND; 526 527 typedef struct 528 { 529 UINT16 company_id; /* company ID */ 530 UINT8 data_len; /* <= 20 bytes */ 531 UINT8 *p_pattern; 532 UINT16 company_id_mask; /* UUID value mask */ 533 UINT8 *p_pattern_mask; /* Manufacturer data matching mask, same length 534 as data pattern, set to all 0xff, match exact data */ 535 }tBTA_DM_BLE_PF_MANU_COND; 536 537 typedef struct 538 { 539 UINT16 uuid; /* service ID */ 540 UINT8 data_len; /* <= 20 bytes */ 541 UINT8 *p_pattern; 542 UINT8 *p_pattern_mask; /* Service data matching mask, same length 543 as data pattern, set to all 0xff, match exact data */ 544 }tBTA_DM_BLE_PF_SRVC_PATTERN_COND; 545 546 typedef union 547 { 548 tBLE_BD_ADDR target_addr; 549 tBTA_DM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */ 550 tBTA_DM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */ 551 tBTA_DM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */ 552 tBTA_DM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */ 553 tBTA_DM_BLE_PF_SRVC_PATTERN_COND srvc_data; /* service data pattern */ 554 }tBTA_DM_BLE_PF_COND_PARAM; 555 556 typedef UINT8 tBTA_DM_BLE_PF_FILT_INDEX; 557 typedef UINT8 tBTA_DM_BLE_PF_AVBL_SPACE; 558 559 typedef INT8 tBTA_DM_RSSI_VALUE; 560 typedef UINT8 tBTA_DM_LINK_QUALITY_VALUE; 561 562 563 typedef UINT8 tBTA_SIG_STRENGTH_MASK; 564 565 566 /* Security Callback Events */ 567 #define BTA_DM_ENABLE_EVT 0 /* Enable Event */ 568 #define BTA_DM_DISABLE_EVT 1 /* Disable Event */ 569 #define BTA_DM_PIN_REQ_EVT 2 /* PIN request. */ 570 #define BTA_DM_AUTH_CMPL_EVT 3 /* Authentication complete indication. */ 571 #define BTA_DM_AUTHORIZE_EVT 4 /* Authorization request. */ 572 #define BTA_DM_LINK_UP_EVT 5 /* Connection UP event */ 573 #define BTA_DM_LINK_DOWN_EVT 6 /* Connection DOWN event */ 574 #define BTA_DM_SIG_STRENGTH_EVT 7 /* Signal strength for bluetooth connection */ 575 #define BTA_DM_BUSY_LEVEL_EVT 8 /* System busy level */ 576 #define BTA_DM_BOND_CANCEL_CMPL_EVT 9 /* Bond cancel complete indication */ 577 #define BTA_DM_SP_CFM_REQ_EVT 10 /* Simple Pairing User Confirmation request. */ 578 #define BTA_DM_SP_KEY_NOTIF_EVT 11 /* Simple Pairing Passkey Notification */ 579 #define BTA_DM_SP_RMT_OOB_EVT 12 /* Simple Pairing Remote OOB Data request. */ 580 #define BTA_DM_SP_KEYPRESS_EVT 13 /* Key press notification event. */ 581 #define BTA_DM_ROLE_CHG_EVT 14 /* Role Change event. */ 582 #define BTA_DM_BLE_KEY_EVT 15 /* BLE SMP key event for peer device keys */ 583 #define BTA_DM_BLE_SEC_REQ_EVT 16 /* BLE SMP security request */ 584 #define BTA_DM_BLE_PASSKEY_NOTIF_EVT 17 /* SMP passkey notification event */ 585 #define BTA_DM_BLE_PASSKEY_REQ_EVT 18 /* SMP passkey request event */ 586 #define BTA_DM_BLE_OOB_REQ_EVT 19 /* SMP OOB request event */ 587 #define BTA_DM_BLE_LOCAL_IR_EVT 20 /* BLE local IR event */ 588 #define BTA_DM_BLE_LOCAL_ER_EVT 21 /* BLE local ER event */ 589 #define BTA_DM_BLE_NC_REQ_EVT 22 /* SMP Numeric Comparison request event */ 590 #define BTA_DM_SP_RMT_OOB_EXT_EVT 23 /* Simple Pairing Remote OOB Extended Data request. */ 591 #define BTA_DM_BLE_AUTH_CMPL_EVT 24 /* BLE Auth complete */ 592 #define BTA_DM_DEV_UNPAIRED_EVT 25 593 #define BTA_DM_HW_ERROR_EVT 26 /* BT Chip H/W error */ 594 #define BTA_DM_LE_FEATURES_READ 27 /* Cotroller specific LE features are read */ 595 #define BTA_DM_ENER_INFO_READ 28 /* Energy info read */ 596 typedef UINT8 tBTA_DM_SEC_EVT; 597 598 /* Structure associated with BTA_DM_ENABLE_EVT */ 599 typedef struct 600 { 601 tBTA_STATUS status; 602 } tBTA_DM_ENABLE; 603 604 /* Structure associated with BTA_DM_PIN_REQ_EVT */ 605 typedef struct 606 { 607 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 608 BD_ADDR bd_addr; /* BD address peer device. */ 609 DEV_CLASS dev_class; /* Class of Device */ 610 BD_NAME bd_name; /* Name of peer device. */ 611 BOOLEAN min_16_digit; /* TRUE if the pin returned must be at least 16 digits */ 612 } tBTA_DM_PIN_REQ; 613 614 /* BLE related definition */ 615 616 #define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10) 617 618 /* Converts SMP error codes defined in smp_api.h to SMP auth fail reasons below. */ 619 #define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x)) 620 621 #define BTA_DM_AUTH_SMP_PASSKEY_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PASSKEY_ENTRY_FAIL) 622 #define BTA_DM_AUTH_SMP_OOB_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL) 623 #define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL) 624 #define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR) 625 #define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT) 626 #define BTA_DM_AUTH_SMP_ENC_KEY_SIZE (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE) 627 #define BTA_DM_AUTH_SMP_INVALID_CMD (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD) 628 #define BTA_DM_AUTH_SMP_UNKNOWN_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN) 629 #define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT (BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS) 630 #define BTA_DM_AUTH_SMP_INVALID_PARAMETERS (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_PARAMETERS) 631 #define BTA_DM_AUTH_SMP_INTERNAL_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR) 632 #define BTA_DM_AUTH_SMP_UNKNOWN_IO (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP) 633 #define BTA_DM_AUTH_SMP_INIT_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL) 634 #define BTA_DM_AUTH_SMP_CONFIRM_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL) 635 #define BTA_DM_AUTH_SMP_BUSY (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY) 636 #define BTA_DM_AUTH_SMP_ENC_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL) 637 #define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT) 638 #define BTA_DM_AUTH_SMP_CONN_TOUT (BTA_DM_AUTH_FAIL_BASE + SMP_CONN_TOUT) 639 640 /* connection parameter boundary value and dummy value */ 641 #define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN 642 #define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX 643 #define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN 644 #define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX 645 #define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN 646 #define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX 647 #define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX 648 #define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN 649 #define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX 650 #define BTA_DM_BLE_CONN_PARAM_UNDEF BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be overwritten */ 651 652 653 #define BTA_LE_KEY_PENC BTM_LE_KEY_PENC /* encryption information of peer device */ 654 #define BTA_LE_KEY_PID BTM_LE_KEY_PID /* identity key of the peer device */ 655 #define BTA_LE_KEY_PCSRK BTM_LE_KEY_PCSRK /* peer SRK */ 656 #define BTA_LE_KEY_LENC BTM_LE_KEY_LENC /* master role security information:div */ 657 #define BTA_LE_KEY_LID BTM_LE_KEY_LID /* master device ID key */ 658 #define BTA_LE_KEY_LCSRK BTM_LE_KEY_LCSRK /* local CSRK has been deliver to peer */ 659 typedef UINT8 tBTA_LE_KEY_TYPE; /* can be used as a bit mask */ 660 661 662 typedef tBTM_LE_PENC_KEYS tBTA_LE_PENC_KEYS ; 663 typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS; 664 typedef tBTM_LE_LENC_KEYS tBTA_LE_LENC_KEYS ; 665 typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS ; 666 typedef tBTM_LE_PID_KEYS tBTA_LE_PID_KEYS ; 667 668 typedef union 669 { 670 tBTA_LE_PENC_KEYS penc_key; /* received peer encryption key */ 671 tBTA_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */ 672 tBTA_LE_PID_KEYS pid_key; /* peer device ID key */ 673 tBTA_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/ 674 tBTA_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/ 675 tBTA_LE_PID_KEYS lid_key; /* local device ID key for the particular remote */ 676 }tBTA_LE_KEY_VALUE; 677 678 #define BTA_BLE_LOCAL_KEY_TYPE_ID 1 679 #define BTA_BLE_LOCAL_KEY_TYPE_ER 2 680 typedef UINT8 tBTA_DM_BLE_LOCAL_KEY_MASK; 681 682 typedef struct 683 { 684 BT_OCTET16 ir; 685 BT_OCTET16 irk; 686 BT_OCTET16 dhk; 687 }tBTA_BLE_LOCAL_ID_KEYS; 688 689 #define BTA_DM_SEC_GRANTED BTA_SUCCESS 690 #define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT 691 #define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT 692 typedef UINT8 tBTA_DM_BLE_SEC_GRANT; 693 694 695 #define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE 696 #define BTA_DM_BLE_CONN_AUTO BTM_BLE_CONN_AUTO 697 #define BTA_DM_BLE_CONN_SELECTIVE BTM_BLE_CONN_SELECTIVE 698 typedef UINT8 tBTA_DM_BLE_CONN_TYPE; 699 700 typedef BOOLEAN (tBTA_DM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); 701 702 /* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */ 703 typedef struct 704 { 705 BD_ADDR bd_addr; /* peer address */ 706 BD_NAME bd_name; /* peer device name */ 707 } tBTA_DM_BLE_SEC_REQ; 708 709 typedef struct 710 { 711 BD_ADDR bd_addr; /* peer address */ 712 tBTM_LE_KEY_TYPE key_type; 713 tBTM_LE_KEY_VALUE *p_key_value; 714 }tBTA_DM_BLE_KEY; 715 716 /* Structure associated with BTA_DM_AUTH_CMPL_EVT */ 717 typedef struct 718 { 719 BD_ADDR bd_addr; /* BD address peer device. */ 720 BD_NAME bd_name; /* Name of peer device. */ 721 BOOLEAN key_present; /* Valid link key value in key element */ 722 LINK_KEY key; /* Link key associated with peer device. */ 723 UINT8 key_type; /* The type of Link Key */ 724 BOOLEAN success; /* TRUE of authentication succeeded, FALSE if failed. */ 725 UINT8 fail_reason; /* The HCI reason/error code for when success=FALSE */ 726 tBLE_ADDR_TYPE addr_type; /* Peer device address type */ 727 tBT_DEVICE_TYPE dev_type; 728 } tBTA_DM_AUTH_CMPL; 729 730 731 /* Structure associated with BTA_DM_AUTHORIZE_EVT */ 732 typedef struct 733 { 734 BD_ADDR bd_addr; /* BD address peer device. */ 735 BD_NAME bd_name; /* Name of peer device. */ 736 tBTA_SERVICE_ID service; /* Service ID to authorize. */ 737 DEV_CLASS dev_class; 738 } tBTA_DM_AUTHORIZE; 739 740 /* Structure associated with BTA_DM_LINK_UP_EVT */ 741 typedef struct 742 { 743 BD_ADDR bd_addr; /* BD address peer device. */ 744 #if BLE_INCLUDED == TRUE 745 tBTA_TRANSPORT link_type; 746 #endif 747 } tBTA_DM_LINK_UP; 748 749 /* Structure associated with BTA_DM_LINK_DOWN_EVT */ 750 typedef struct 751 { 752 BD_ADDR bd_addr; /* BD address peer device. */ 753 UINT8 status; /* connection open/closed */ 754 BOOLEAN is_removed; /* TRUE if device is removed when link is down */ 755 #if BLE_INCLUDED == TRUE 756 tBTA_TRANSPORT link_type; 757 #endif 758 } tBTA_DM_LINK_DOWN; 759 760 /* Structure associated with BTA_DM_ROLE_CHG_EVT */ 761 typedef struct 762 { 763 BD_ADDR bd_addr; /* BD address peer device. */ 764 UINT8 new_role; /* the new connection role */ 765 } tBTA_DM_ROLE_CHG; 766 767 /* Structure associated with BTA_DM_BUSY_LEVEL_EVT */ 768 typedef struct 769 { 770 UINT8 level; /* when paging or inquiring, level is 10. 771 Otherwise, the number of ACL links */ 772 UINT8 level_flags; /* indicates individual flags */ 773 } tBTA_DM_BUSY_LEVEL; 774 775 #define BTA_IO_CAP_OUT BTM_IO_CAP_OUT /* 0 DisplayOnly */ 776 #define BTA_IO_CAP_IO BTM_IO_CAP_IO /* 1 DisplayYesNo */ 777 #define BTA_IO_CAP_IN BTM_IO_CAP_IN /* 2 KeyboardOnly */ 778 #define BTA_IO_CAP_NONE BTM_IO_CAP_NONE /* 3 NoInputNoOutput */ 779 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 780 #define BTA_IO_CAP_KBDISP BTM_IO_CAP_KBDISP /* 4 Keyboard display */ 781 #endif 782 typedef tBTM_IO_CAP tBTA_IO_CAP; 783 784 #define BTA_AUTH_SP_NO BTM_AUTH_SP_NO /* 0 MITM Protection Not Required - Single Profile/non-bonding 785 Numeric comparison with automatic accept allowed */ 786 #define BTA_AUTH_SP_YES BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding 787 Use IO Capabilities to determine authentication procedure */ 788 #define BTA_AUTH_AP_NO BTM_AUTH_AP_NO /* 2 MITM Protection Not Required - All Profiles/dedicated bonding 789 Numeric comparison with automatic accept allowed */ 790 #define BTA_AUTH_AP_YES BTM_AUTH_AP_YES /* 3 MITM Protection Required - All Profiles/dedicated bonding 791 Use IO Capabilities to determine authentication procedure */ 792 #define BTA_AUTH_SPGB_NO BTM_AUTH_SPGB_NO /* 4 MITM Protection Not Required - Single Profiles/general bonding 793 Numeric comparison with automatic accept allowed */ 794 #define BTA_AUTH_SPGB_YES BTM_AUTH_SPGB_YES /* 5 MITM Protection Required - Single Profiles/general bonding 795 Use IO Capabilities to determine authentication procedure */ 796 typedef tBTM_AUTH_REQ tBTA_AUTH_REQ; 797 798 #define BTA_AUTH_DD_BOND BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */ 799 #define BTA_AUTH_GEN_BOND BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */ 800 #define BTA_AUTH_BONDS BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */ 801 802 #define BTA_LE_AUTH_NO_BOND BTM_LE_AUTH_REQ_NO_BOND /* 0*/ 803 #define BTA_LE_AUTH_BOND BTM_LE_AUTH_REQ_BOND /* 1 << 0 */ 804 #define BTA_LE_AUTH_REQ_MITM BTM_LE_AUTH_REQ_MITM /* 1 << 2 */ 805 806 #define BTA_LE_AUTH_REQ_SC_ONLY BTM_LE_AUTH_REQ_SC_ONLY /* 1 << 3 */ 807 #define BTA_LE_AUTH_REQ_SC_BOND BTM_LE_AUTH_REQ_SC_BOND /* 1001 */ 808 #define BTA_LE_AUTH_REQ_SC_MITM BTM_LE_AUTH_REQ_SC_MITM /* 1100 */ 809 #define BTA_LE_AUTH_REQ_SC_MITM_BOND BTM_LE_AUTH_REQ_SC_MITM_BOND /* 1101 */ 810 typedef tBTM_LE_AUTH_REQ tBTA_LE_AUTH_REQ; /* combination of the above bit pattern */ 811 812 #define BTA_OOB_NONE BTM_OOB_NONE 813 #define BTA_OOB_PRESENT BTM_OOB_PRESENT 814 #define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN 815 816 typedef tBTM_OOB_DATA tBTA_OOB_DATA; 817 818 /* Structure associated with BTA_DM_SP_CFM_REQ_EVT */ 819 typedef struct 820 { 821 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 822 BD_ADDR bd_addr; /* peer address */ 823 DEV_CLASS dev_class; /* peer CoD */ 824 BD_NAME bd_name; /* peer device name */ 825 UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */ 826 BOOLEAN just_works; /* TRUE, if "Just Works" association model */ 827 tBTA_AUTH_REQ loc_auth_req; /* Authentication required for local device */ 828 tBTA_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */ 829 tBTA_IO_CAP loc_io_caps; /* IO Capabilities of local device */ 830 tBTA_AUTH_REQ rmt_io_caps; /* IO Capabilities of remote device */ 831 } tBTA_DM_SP_CFM_REQ; 832 833 enum 834 { 835 BTA_SP_KEY_STARTED, /* passkey entry started */ 836 BTA_SP_KEY_ENTERED, /* passkey digit entered */ 837 BTA_SP_KEY_ERASED, /* passkey digit erased */ 838 BTA_SP_KEY_CLEARED, /* passkey cleared */ 839 BTA_SP_KEY_COMPLT /* passkey entry completed */ 840 }; 841 typedef UINT8 tBTA_SP_KEY_TYPE; 842 843 /* Structure associated with BTA_DM_SP_KEYPRESS_EVT */ 844 typedef struct 845 { 846 BD_ADDR bd_addr; /* peer address */ 847 tBTA_SP_KEY_TYPE notif_type; 848 }tBTA_DM_SP_KEY_PRESS; 849 850 /* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */ 851 typedef struct 852 { 853 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 854 BD_ADDR bd_addr; /* peer address */ 855 DEV_CLASS dev_class; /* peer CoD */ 856 BD_NAME bd_name; /* peer device name */ 857 UINT32 passkey; /* the numeric value for comparison. If just_works, do not show this number to UI */ 858 } tBTA_DM_SP_KEY_NOTIF; 859 860 /* Structure associated with BTA_DM_SP_RMT_OOB_EVT */ 861 typedef struct 862 { 863 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 864 BD_ADDR bd_addr; /* peer address */ 865 DEV_CLASS dev_class; /* peer CoD */ 866 BD_NAME bd_name; /* peer device name */ 867 } tBTA_DM_SP_RMT_OOB; 868 869 /* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */ 870 typedef struct 871 { 872 tBTA_STATUS result; /* TRUE of bond cancel succeeded, FALSE if failed. */ 873 } tBTA_DM_BOND_CANCEL_CMPL; 874 875 /* Union of all security callback structures */ 876 typedef union 877 { 878 tBTA_DM_ENABLE enable; /* BTA enabled */ 879 tBTA_DM_PIN_REQ pin_req; /* PIN request. */ 880 tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */ 881 tBTA_DM_AUTHORIZE authorize; /* Authorization request. */ 882 tBTA_DM_LINK_UP link_up; /* ACL connection down event */ 883 tBTA_DM_LINK_DOWN link_down; /* ACL connection down event */ 884 tBTA_DM_BUSY_LEVEL busy_level; /* System busy level */ 885 tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */ 886 tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */ 887 tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */ 888 tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */ 889 tBTA_DM_SP_KEY_PRESS key_press; /* key press notification event */ 890 tBTA_DM_ROLE_CHG role_chg; /* role change event */ 891 tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */ 892 tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */ 893 tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */ 894 BT_OCTET16 ble_er; /* ER event data */ 895 } tBTA_DM_SEC; 896 897 /* Security callback */ 898 typedef void (tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data); 899 900 #define BTA_BLE_MULTI_ADV_ILLEGAL 0 901 902 /* multi adv callback event */ 903 #define BTA_BLE_MULTI_ADV_ENB_EVT 1 904 #define BTA_BLE_MULTI_ADV_DISABLE_EVT 2 905 #define BTA_BLE_MULTI_ADV_PARAM_EVT 3 906 #define BTA_BLE_MULTI_ADV_DATA_EVT 4 907 908 typedef UINT8 tBTA_BLE_MULTI_ADV_EVT; 909 910 /* multi adv callback */ 911 typedef void (tBTA_BLE_MULTI_ADV_CBACK)(tBTA_BLE_MULTI_ADV_EVT event, 912 UINT8 inst_id, void *p_ref, tBTA_STATUS status); 913 typedef UINT32 tBTA_DM_BLE_REF_VALUE; 914 915 #define BTA_DM_BLE_PF_ENABLE_EVT BTM_BLE_PF_ENABLE 916 #define BTA_DM_BLE_PF_CONFIG_EVT BTM_BLE_PF_CONFIG 917 typedef UINT8 tBTA_DM_BLE_PF_EVT; 918 919 #define BTA_DM_BLE_PF_ENABLE 1 920 #define BTA_DM_BLE_PF_CONFIG 2 921 typedef UINT8 tBTA_DM_BLE_PF_ACTION; 922 923 /* Config callback */ 924 typedef void (tBTA_DM_BLE_PF_CFG_CBACK) (tBTA_DM_BLE_PF_ACTION action, 925 tBTA_DM_BLE_PF_COND_TYPE cfg_cond, 926 tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, tBTA_STATUS status, 927 tBTA_DM_BLE_REF_VALUE ref_value); 928 /* Param callback */ 929 typedef void (tBTA_DM_BLE_PF_PARAM_CBACK) (UINT8 action_type, tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, 930 tBTA_DM_BLE_REF_VALUE ref_value, tBTA_STATUS status); 931 932 /* Status callback */ 933 typedef void (tBTA_DM_BLE_PF_STATUS_CBACK) (UINT8 action, tBTA_STATUS status, 934 tBTA_DM_BLE_REF_VALUE ref_value); 935 936 937 #define BTA_DM_BLE_PF_BRDCAST_ADDR_FILT 1 938 #define BTA_DM_BLE_PF_SERV_DATA_CHG_FILT 2 939 #define BTA_DM_BLE_PF_SERV_UUID 4 940 #define BTA_DM_BLE_PF_SERV_SOLC_UUID 8 941 #define BTA_DM_BLE_PF_LOC_NAME_CHECK 16 942 #define BTA_DM_BLE_PF_MANUF_NAME_CHECK 32 943 #define BTA_DM_BLE_PF_SERV_DATA_CHECK 64 944 typedef UINT16 tBTA_DM_BLE_PF_FEAT_SEL; 945 946 #define BTA_DM_BLE_PF_LIST_LOGIC_OR 1 947 #define BTA_DM_BLE_PF_LIST_LOGIC_AND 2 948 typedef UINT16 tBTA_DM_BLE_PF_LIST_LOGIC_TYPE; 949 950 #define BTA_DM_BLE_PF_FILT_LOGIC_OR 0 951 #define BTA_DM_BLE_PF_FILT_LOGIC_AND 1 952 typedef UINT16 tBTA_DM_BLE_PF_FILT_LOGIC_TYPE; 953 954 typedef UINT8 tBTA_DM_BLE_PF_RSSI_THRESHOLD; 955 typedef UINT8 tBTA_DM_BLE_PF_DELIVERY_MODE; 956 typedef UINT16 tBTA_DM_BLE_PF_TIMEOUT; 957 typedef UINT8 tBTA_DM_BLE_PF_TIMEOUT_CNT; 958 typedef UINT16 tBTA_DM_BLE_PF_ADV_TRACK_ENTRIES; 959 960 typedef struct 961 { 962 tBTA_DM_BLE_PF_FEAT_SEL feat_seln; 963 tBTA_DM_BLE_PF_LIST_LOGIC_TYPE list_logic_type; 964 tBTA_DM_BLE_PF_FILT_LOGIC_TYPE filt_logic_type; 965 tBTA_DM_BLE_PF_RSSI_THRESHOLD rssi_high_thres; 966 tBTA_DM_BLE_PF_RSSI_THRESHOLD rssi_low_thres; 967 tBTA_DM_BLE_PF_DELIVERY_MODE dely_mode; 968 tBTA_DM_BLE_PF_TIMEOUT found_timeout; 969 tBTA_DM_BLE_PF_TIMEOUT lost_timeout; 970 tBTA_DM_BLE_PF_TIMEOUT_CNT found_timeout_cnt; 971 tBTA_DM_BLE_PF_ADV_TRACK_ENTRIES num_of_tracking_entries; 972 } tBTA_DM_BLE_PF_FILT_PARAMS; 973 974 /* Search callback events */ 975 #define BTA_DM_INQ_RES_EVT 0 /* Inquiry result for a peer device. */ 976 #define BTA_DM_INQ_CMPL_EVT 1 /* Inquiry complete. */ 977 #define BTA_DM_DISC_RES_EVT 2 /* Discovery result for a peer device. */ 978 #define BTA_DM_DISC_BLE_RES_EVT 3 /* Discovery result for BLE GATT based servoce on a peer device. */ 979 #define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */ 980 #define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */ 981 #define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */ 982 983 typedef UINT8 tBTA_DM_SEARCH_EVT; 984 985 #define BTA_DM_INQ_RES_IGNORE_RSSI BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */ 986 987 /* Structure associated with BTA_DM_INQ_RES_EVT */ 988 typedef struct 989 { 990 BD_ADDR bd_addr; /* BD address peer device. */ 991 DEV_CLASS dev_class; /* Device class of peer device. */ 992 BOOLEAN remt_name_not_required; /* Application sets this flag if it already knows the name of the device */ 993 /* If the device name is known to application BTA skips the remote name request */ 994 BOOLEAN is_limited; /* TRUE, if the limited inquiry bit is set in the CoD */ 995 INT8 rssi; /* The rssi value */ 996 UINT8 *p_eir; /* received EIR */ 997 #if (BLE_INCLUDED == TRUE) 998 UINT8 inq_result_type; 999 UINT8 ble_addr_type; 1000 tBTM_BLE_EVT_TYPE ble_evt_type; 1001 tBT_DEVICE_TYPE device_type; 1002 UINT8 flag; 1003 #endif 1004 1005 } tBTA_DM_INQ_RES; 1006 1007 /* Structure associated with BTA_DM_INQ_CMPL_EVT */ 1008 typedef struct 1009 { 1010 UINT8 num_resps; /* Number of inquiry responses. */ 1011 } tBTA_DM_INQ_CMPL; 1012 1013 /* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */ 1014 typedef struct 1015 { 1016 BD_ADDR bd_addr; /* BD address peer device. */ 1017 UINT8 num_record; /* Number of DI record */ 1018 tBTA_STATUS result; 1019 } tBTA_DM_DI_DISC_CMPL; 1020 1021 /* Structure associated with BTA_DM_DISC_RES_EVT */ 1022 typedef struct 1023 { 1024 BD_ADDR bd_addr; /* BD address peer device. */ 1025 BD_NAME bd_name; /* Name of peer device. */ 1026 tBTA_SERVICE_MASK services; /* Services found on peer device. */ 1027 UINT8 * p_raw_data; /* Raw data for discovery DB */ 1028 UINT32 raw_data_size; /* size of raw data */ 1029 tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */ 1030 UINT32 num_uuids; 1031 UINT8 *p_uuid_list; 1032 tBTA_STATUS result; 1033 } tBTA_DM_DISC_RES; 1034 1035 /* Structure associated with tBTA_DM_DISC_BLE_RES */ 1036 typedef struct 1037 { 1038 BD_ADDR bd_addr; /* BD address peer device. */ 1039 BD_NAME bd_name; /* Name of peer device. */ 1040 tBT_UUID service; /* GATT based Services UUID found on peer device. */ 1041 } tBTA_DM_DISC_BLE_RES; 1042 1043 1044 /* Union of all search callback structures */ 1045 typedef union 1046 { 1047 tBTA_DM_INQ_RES inq_res; /* Inquiry result for a peer device. */ 1048 tBTA_DM_INQ_CMPL inq_cmpl; /* Inquiry complete. */ 1049 tBTA_DM_DISC_RES disc_res; /* Discovery result for a peer device. */ 1050 tBTA_DM_DISC_BLE_RES disc_ble_res; /* discovery result for GATT based service */ 1051 tBTA_DM_DI_DISC_CMPL di_disc; /* DI discovery result for a peer device */ 1052 1053 } tBTA_DM_SEARCH; 1054 1055 /* Search callback */ 1056 typedef void (tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data); 1057 1058 /* Execute call back */ 1059 typedef void (tBTA_DM_EXEC_CBACK) (void * p_param); 1060 1061 /* Encryption callback*/ 1062 typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_TRANSPORT transport, tBTA_STATUS result); 1063 1064 #define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE 1065 #define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT 1066 #define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM 1067 #define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM 1068 typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT; 1069 1070 #if BLE_INCLUDED == TRUE 1071 typedef tBTM_BLE_TX_TIME_MS tBTA_DM_BLE_TX_TIME_MS; 1072 typedef tBTM_BLE_RX_TIME_MS tBTA_DM_BLE_RX_TIME_MS; 1073 typedef tBTM_BLE_IDLE_TIME_MS tBTA_DM_BLE_IDLE_TIME_MS; 1074 typedef tBTM_BLE_ENERGY_USED tBTA_DM_BLE_ENERGY_USED; 1075 1076 #define BTA_DM_CONTRL_UNKNOWN 0 /* Unknown state */ 1077 #define BTA_DM_CONTRL_ACTIVE 1 /* ACL link on, SCO link ongoing, sniff mode */ 1078 #define BTA_DM_CONTRL_SCAN 2 /* Scan state - paging/inquiry/trying to connect*/ 1079 #define BTA_DM_CONTRL_IDLE 3 /* Idle state - page scan, LE advt, inquiry scan */ 1080 1081 typedef UINT8 tBTA_DM_CONTRL_STATE; 1082 1083 typedef UINT8 tBTA_DM_BLE_ADV_STATE; 1084 typedef UINT8 tBTA_DM_BLE_ADV_INFO_PRESENT; 1085 typedef UINT8 tBTA_DM_BLE_RSSI_VALUE; 1086 typedef UINT16 tBTA_DM_BLE_ADV_INFO_TIMESTAMP; 1087 1088 typedef tBTM_BLE_TRACK_ADV_DATA tBTA_DM_BLE_TRACK_ADV_DATA; 1089 1090 typedef void (tBTA_BLE_SCAN_THRESHOLD_CBACK)(tBTA_DM_BLE_REF_VALUE ref_value); 1091 1092 typedef void (tBTA_BLE_SCAN_REP_CBACK) (tBTA_DM_BLE_REF_VALUE ref_value, UINT8 report_format, 1093 UINT8 num_records, UINT16 data_len, 1094 UINT8* p_rep_data, tBTA_STATUS status); 1095 1096 typedef void (tBTA_BLE_SCAN_SETUP_CBACK) (tBTA_BLE_BATCH_SCAN_EVT evt, 1097 tBTA_DM_BLE_REF_VALUE ref_value, 1098 tBTA_STATUS status); 1099 1100 typedef void (tBTA_BLE_TRACK_ADV_CMPL_CBACK)(int action, tBTA_STATUS status, 1101 tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, 1102 tBTA_DM_BLE_REF_VALUE ref_value); 1103 1104 typedef void (tBTA_BLE_TRACK_ADV_CBACK)(tBTA_DM_BLE_TRACK_ADV_DATA *p_adv_data); 1105 1106 typedef void (tBTA_BLE_ENERGY_INFO_CBACK)(tBTA_DM_BLE_TX_TIME_MS tx_time, 1107 tBTA_DM_BLE_RX_TIME_MS rx_time, 1108 tBTA_DM_BLE_IDLE_TIME_MS idle_time, 1109 tBTA_DM_BLE_ENERGY_USED energy_used, 1110 tBTA_DM_CONTRL_STATE ctrl_state, 1111 tBTA_STATUS status); 1112 1113 #else 1114 typedef UINT8 tBTA_DM_BLE_SEC_ACT; 1115 #endif 1116 1117 /* Maximum service name length */ 1118 #define BTA_SERVICE_NAME_LEN 35 1119 #define BTA_SERVICE_DESP_LEN BTA_SERVICE_NAME_LEN 1120 #define BTA_PROVIDER_NAME_LEN BTA_SERVICE_NAME_LEN 1121 1122 1123 /* link policy masks */ 1124 #define BTA_DM_LP_SWITCH HCI_ENABLE_MASTER_SLAVE_SWITCH 1125 #define BTA_DM_LP_HOLD HCI_ENABLE_HOLD_MODE 1126 #define BTA_DM_LP_SNIFF HCI_ENABLE_SNIFF_MODE 1127 #define BTA_DM_LP_PARK HCI_ENABLE_PARK_MODE 1128 typedef UINT16 tBTA_DM_LP_MASK; 1129 1130 /* power mode actions */ 1131 #define BTA_DM_PM_NO_ACTION 0x00 /* no change to the current pm setting */ 1132 #define BTA_DM_PM_PARK 0x10 /* prefers park mode */ 1133 #define BTA_DM_PM_SNIFF 0x20 /* prefers sniff mode */ 1134 #define BTA_DM_PM_SNIFF1 0x21 /* prefers sniff1 mode */ 1135 #define BTA_DM_PM_SNIFF2 0x22 /* prefers sniff2 mode */ 1136 #define BTA_DM_PM_SNIFF3 0x23 /* prefers sniff3 mode */ 1137 #define BTA_DM_PM_SNIFF4 0x24 /* prefers sniff4 mode */ 1138 #define BTA_DM_PM_SNIFF5 0x25 /* prefers sniff5 mode */ 1139 #define BTA_DM_PM_SNIFF6 0x26 /* prefers sniff6 mode */ 1140 #define BTA_DM_PM_SNIFF7 0x27 /* prefers sniff7 mode */ 1141 #define BTA_DM_PM_SNIFF_USER0 0x28 /* prefers user-defined sniff0 mode (testtool only) */ 1142 #define BTA_DM_PM_SNIFF_USER1 0x29 /* prefers user-defined sniff1 mode (testtool only) */ 1143 #define BTA_DM_PM_ACTIVE 0x40 /* prefers active mode */ 1144 #define BTA_DM_PM_RETRY 0x80 /* retry power mode based on current settings */ 1145 #define BTA_DM_PM_SUSPEND 0x04 /* prefers suspend mode */ 1146 #define BTA_DM_PM_NO_PREF 0x01 /* service has no prefernce on power mode setting. eg. connection to service got closed */ 1147 1148 typedef UINT8 tBTA_DM_PM_ACTION; 1149 1150 /* index to bta_dm_ssr_spec */ 1151 #define BTA_DM_PM_SSR0 0 1152 #define BTA_DM_PM_SSR1 1 /* BTA_DM_PM_SSR1 will be dedicated for 1153 HH SSR setting entry, no other profile can use it */ 1154 #define BTA_DM_PM_SSR2 2 1155 #define BTA_DM_PM_SSR3 3 1156 #define BTA_DM_PM_SSR4 4 1157 #define BTA_DM_PM_SSR5 5 1158 #define BTA_DM_PM_SSR6 6 1159 1160 #define BTA_DM_PM_NUM_EVTS 9 1161 1162 #ifndef BTA_DM_PM_PARK_IDX 1163 #define BTA_DM_PM_PARK_IDX 5 /* the actual index to bta_dm_pm_md[] for PARK mode */ 1164 #endif 1165 1166 #ifndef BTA_DM_PM_SNIFF_A2DP_IDX 1167 #define BTA_DM_PM_SNIFF_A2DP_IDX BTA_DM_PM_SNIFF 1168 #endif 1169 1170 #ifndef BTA_DM_PM_SNIFF_HD_IDLE_IDX 1171 #define BTA_DM_PM_SNIFF_HD_IDLE_IDX BTA_DM_PM_SNIFF2 1172 #endif 1173 1174 #ifndef BTA_DM_PM_SNIFF_SCO_OPEN_IDX 1175 #define BTA_DM_PM_SNIFF_SCO_OPEN_IDX BTA_DM_PM_SNIFF3 1176 #endif 1177 1178 #ifndef BTA_DM_PM_SNIFF_HD_ACTIVE_IDX 1179 #define BTA_DM_PM_SNIFF_HD_ACTIVE_IDX BTA_DM_PM_SNIFF4 1180 #endif 1181 1182 #ifndef BTA_DM_PM_SNIFF_HH_OPEN_IDX 1183 #define BTA_DM_PM_SNIFF_HH_OPEN_IDX BTA_DM_PM_SNIFF2 1184 #endif 1185 1186 #ifndef BTA_DM_PM_SNIFF_HH_ACTIVE_IDX 1187 #define BTA_DM_PM_SNIFF_HH_ACTIVE_IDX BTA_DM_PM_SNIFF2 1188 #endif 1189 1190 #ifndef BTA_DM_PM_SNIFF_HH_IDLE_IDX 1191 #define BTA_DM_PM_SNIFF_HH_IDLE_IDX BTA_DM_PM_SNIFF2 1192 #endif 1193 1194 1195 #ifndef BTA_DM_PM_HH_OPEN_DELAY 1196 #define BTA_DM_PM_HH_OPEN_DELAY 30000 1197 #endif 1198 1199 #ifndef BTA_DM_PM_HH_ACTIVE_DELAY 1200 #define BTA_DM_PM_HH_ACTIVE_DELAY 30000 1201 #endif 1202 1203 #ifndef BTA_DM_PM_HH_IDLE_DELAY 1204 #define BTA_DM_PM_HH_IDLE_DELAY 30000 1205 #endif 1206 1207 /* The Sniff Parameters defined below must be ordered from highest 1208 * latency (biggest interval) to lowest latency. If there is a conflict 1209 * among the connected services the setting with the lowest latency will 1210 * be selected. If a device should override a sniff parameter then it 1211 * must insure that order is maintained. 1212 */ 1213 #ifndef BTA_DM_PM_SNIFF_MAX 1214 #define BTA_DM_PM_SNIFF_MAX 800 1215 #define BTA_DM_PM_SNIFF_MIN 400 1216 #define BTA_DM_PM_SNIFF_ATTEMPT 4 1217 #define BTA_DM_PM_SNIFF_TIMEOUT 1 1218 #endif 1219 1220 #ifndef BTA_DM_PM_SNIFF1_MAX 1221 #define BTA_DM_PM_SNIFF1_MAX 400 1222 #define BTA_DM_PM_SNIFF1_MIN 200 1223 #define BTA_DM_PM_SNIFF1_ATTEMPT 4 1224 #define BTA_DM_PM_SNIFF1_TIMEOUT 1 1225 #endif 1226 1227 #ifndef BTA_DM_PM_SNIFF2_MAX 1228 #define BTA_DM_PM_SNIFF2_MAX 180 1229 #define BTA_DM_PM_SNIFF2_MIN 150 1230 #define BTA_DM_PM_SNIFF2_ATTEMPT 4 1231 #define BTA_DM_PM_SNIFF2_TIMEOUT 1 1232 #endif 1233 1234 #ifndef BTA_DM_PM_SNIFF3_MAX 1235 #define BTA_DM_PM_SNIFF3_MAX 150 1236 #define BTA_DM_PM_SNIFF3_MIN 50 1237 #define BTA_DM_PM_SNIFF3_ATTEMPT 4 1238 #define BTA_DM_PM_SNIFF3_TIMEOUT 1 1239 #endif 1240 1241 #ifndef BTA_DM_PM_SNIFF4_MAX 1242 #define BTA_DM_PM_SNIFF4_MAX 54 1243 #define BTA_DM_PM_SNIFF4_MIN 30 1244 #define BTA_DM_PM_SNIFF4_ATTEMPT 4 1245 #define BTA_DM_PM_SNIFF4_TIMEOUT 1 1246 #endif 1247 1248 #ifndef BTA_DM_PM_SNIFF5_MAX 1249 #define BTA_DM_PM_SNIFF5_MAX 36 1250 #define BTA_DM_PM_SNIFF5_MIN 30 1251 #define BTA_DM_PM_SNIFF5_ATTEMPT 2 1252 #define BTA_DM_PM_SNIFF5_TIMEOUT 0 1253 #endif 1254 1255 #ifndef BTA_DM_PM_PARK_MAX 1256 #define BTA_DM_PM_PARK_MAX 800 1257 #define BTA_DM_PM_PARK_MIN 400 1258 #define BTA_DM_PM_PARK_ATTEMPT 0 1259 #define BTA_DM_PM_PARK_TIMEOUT 0 1260 #endif 1261 1262 1263 /* Switch callback events */ 1264 #define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */ 1265 1266 typedef UINT8 tBTA_DM_SWITCH_EVT; 1267 typedef void (tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event, tBTA_STATUS status); 1268 1269 /* Audio routing out configuration */ 1270 #define BTA_DM_ROUTE_NONE 0x00 /* No Audio output */ 1271 #define BTA_DM_ROUTE_DAC 0x01 /* routing over analog output */ 1272 #define BTA_DM_ROUTE_I2S 0x02 /* routing over digital (I2S) output */ 1273 #define BTA_DM_ROUTE_BT_MONO 0x04 /* routing over SCO */ 1274 #define BTA_DM_ROUTE_BT_STEREO 0x08 /* routing over BT Stereo */ 1275 #define BTA_DM_ROUTE_HOST 0x10 /* routing over Host */ 1276 #define BTA_DM_ROUTE_FMTX 0x20 /* routing over FMTX */ 1277 #define BTA_DM_ROUTE_FMRX 0x40 /* routing over FMRX */ 1278 #define BTA_DM_ROUTE_BTSNK 0x80 /* routing over BT SNK */ 1279 1280 typedef UINT8 tBTA_DM_ROUTE_PATH; 1281 1282 1283 /* Device Identification (DI) data structure 1284 */ 1285 /* Used to set the DI record */ 1286 typedef tSDP_DI_RECORD tBTA_DI_RECORD; 1287 /* Used to get the DI record */ 1288 typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD; 1289 /* SDP discovery database */ 1290 typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB; 1291 1292 #ifndef BTA_DI_NUM_MAX 1293 #define BTA_DI_NUM_MAX 3 1294 #endif 1295 1296 /* Device features mask definitions */ 1297 #define BTA_FEATURE_BYTES_PER_PAGE BTM_FEATURE_BYTES_PER_PAGE 1298 #define BTA_EXT_FEATURES_PAGE_MAX BTM_EXT_FEATURES_PAGE_MAX 1299 /* ACL type 1300 */ 1301 #define BTA_DM_LINK_TYPE_BR_EDR 0x01 1302 #define BTA_DM_LINK_TYPE_LE 0x02 1303 #define BTA_DM_LINK_TYPE_ALL 0xFF 1304 typedef UINT8 tBTA_DM_LINK_TYPE; 1305 1306 #define IMMEDIATE_DELY_MODE 0x00 1307 #define ONFOUND_DELY_MODE 0x01 1308 #define BATCH_DELY_MODE 0x02 1309 #define ALLOW_ALL_FILTER 0x00 1310 #define LOWEST_RSSI_VALUE 129 1311 1312 /***************************************************************************** 1313 ** External Function Declarations 1314 *****************************************************************************/ 1315 #ifdef __cplusplus 1316 extern "C" 1317 { 1318 #endif 1319 1320 /******************************************************************************* 1321 ** 1322 ** Function BTA_EnableBluetooth 1323 ** 1324 ** Description This function initializes BTA and prepares BTA and the 1325 ** Bluetooth protocol stack for use. This function is 1326 ** typically called at startup or when Bluetooth services 1327 ** are required by the phone. This function must be called 1328 ** before calling any other API function. 1329 ** 1330 ** 1331 ** Returns BTA_SUCCESS if successful. 1332 ** BTA_FAIL if internal failure. 1333 ** 1334 *******************************************************************************/ 1335 extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback); 1336 1337 /******************************************************************************* 1338 ** 1339 ** Function BTA_DisableBluetooth 1340 ** 1341 ** Description This function disables BTA and the Bluetooth protocol 1342 ** stack. It is called when BTA is no longer being used 1343 ** by any application in the system. 1344 ** 1345 ** 1346 ** Returns void 1347 ** 1348 *******************************************************************************/ 1349 extern tBTA_STATUS BTA_DisableBluetooth(void); 1350 1351 /******************************************************************************* 1352 ** 1353 ** Function BTA_EnableTestMode 1354 ** 1355 ** Description Enables bluetooth device under test mode 1356 ** 1357 ** 1358 ** Returns tBTA_STATUS 1359 ** 1360 *******************************************************************************/ 1361 extern tBTA_STATUS BTA_EnableTestMode(void); 1362 1363 /******************************************************************************* 1364 ** 1365 ** Function BTA_DisableTestMode 1366 ** 1367 ** Description Disable bluetooth device under test mode 1368 ** 1369 ** 1370 ** Returns None 1371 ** 1372 *******************************************************************************/ 1373 extern void BTA_DisableTestMode(void); 1374 1375 /******************************************************************************* 1376 ** 1377 ** Function BTA_DmSetDeviceName 1378 ** 1379 ** Description This function sets the Bluetooth name of the local device. 1380 ** 1381 ** 1382 ** Returns void 1383 ** 1384 *******************************************************************************/ 1385 extern void BTA_DmSetDeviceName(char *p_name); 1386 1387 /******************************************************************************* 1388 ** 1389 ** Function BTA_DmSetVisibility 1390 ** 1391 ** Description This function sets the Bluetooth connectable,discoverable, 1392 ** pairable and conn paired only modesmodes of the local device. 1393 ** This controls whether other Bluetooth devices can find and connect to 1394 ** the local device. 1395 ** 1396 ** 1397 ** Returns void 1398 ** 1399 *******************************************************************************/ 1400 extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter); 1401 1402 /******************************************************************************* 1403 ** 1404 ** Function BTA_DmSearch 1405 ** 1406 ** Description This function searches for peer Bluetooth devices. It 1407 ** first performs an inquiry; for each device found from the 1408 ** inquiry it gets the remote name of the device. If 1409 ** parameter services is nonzero, service discovery will be 1410 ** performed on each device for the services specified. 1411 ** 1412 ** 1413 ** Returns void 1414 ** 1415 *******************************************************************************/ 1416 extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, 1417 tBTA_DM_SEARCH_CBACK *p_cback); 1418 1419 /******************************************************************************* 1420 ** 1421 ** Function BTA_DmSearchCancel 1422 ** 1423 ** Description This function cancels a search that has been initiated 1424 ** by calling BTA_DmSearch(). 1425 ** 1426 ** 1427 ** Returns void 1428 ** 1429 *******************************************************************************/ 1430 extern void BTA_DmSearchCancel(void); 1431 1432 /******************************************************************************* 1433 ** 1434 ** Function BTA_DmDiscover 1435 ** 1436 ** Description This function performs service discovery for the services 1437 ** of a particular peer device. 1438 ** 1439 ** 1440 ** Returns void 1441 ** 1442 *******************************************************************************/ 1443 extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services, 1444 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); 1445 1446 /******************************************************************************* 1447 ** 1448 ** Function BTA_DmDiscoverUUID 1449 ** 1450 ** Description This function performs service discovery for the services 1451 ** of a particular peer device. 1452 ** 1453 ** 1454 ** Returns void 1455 ** 1456 *******************************************************************************/ 1457 extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, 1458 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); 1459 1460 /******************************************************************************* 1461 ** 1462 ** Function BTA_DmGetCachedRemoteName 1463 ** 1464 ** Description Retieve cached remote name if available 1465 ** 1466 ** Returns BTA_SUCCESS if cached name was retrieved 1467 ** BTA_FAILURE if cached name is not available 1468 ** 1469 *******************************************************************************/ 1470 tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name); 1471 1472 /******************************************************************************* 1473 ** 1474 ** Function BTA_DmBond 1475 ** 1476 ** Description This function initiates a bonding procedure with a peer 1477 ** device. The bonding procedure enables authentication 1478 ** and optionally encryption on the Bluetooth link. 1479 ** 1480 ** 1481 ** Returns void 1482 ** 1483 *******************************************************************************/ 1484 extern void BTA_DmBond(BD_ADDR bd_addr); 1485 1486 /******************************************************************************* 1487 ** 1488 ** Function BTA_DmBondByTransport 1489 ** 1490 ** Description This function initiates a bonding procedure with a peer 1491 ** device by designated transport. The bonding procedure enables 1492 ** authentication and optionally encryption on the Bluetooth link. 1493 ** 1494 ** 1495 ** Returns void 1496 ** 1497 *******************************************************************************/ 1498 extern void BTA_DmBondByTransport(BD_ADDR bd_addr, tBTA_TRANSPORT transport); 1499 1500 1501 /******************************************************************************* 1502 ** 1503 ** Function BTA_DmBondCancel 1504 ** 1505 ** Description This function cancels a bonding procedure with a peer 1506 ** device. 1507 ** 1508 ** 1509 ** Returns void 1510 ** 1511 *******************************************************************************/ 1512 extern void BTA_DmBondCancel(BD_ADDR bd_addr); 1513 1514 /******************************************************************************* 1515 ** 1516 ** Function BTA_DmPinReply 1517 ** 1518 ** Description This function provides a PIN when one is requested by DM 1519 ** during a bonding procedure. The application should call 1520 ** this function after the security callback is called with 1521 ** a BTA_DM_PIN_REQ_EVT. 1522 ** 1523 ** 1524 ** Returns void 1525 ** 1526 *******************************************************************************/ 1527 extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len, 1528 UINT8 *p_pin); 1529 1530 /******************************************************************************* 1531 ** 1532 ** Function BTA_DmLocalOob 1533 ** 1534 ** Description This function retrieves the OOB data from local controller. 1535 ** The result is reported by bta_dm_co_loc_oob(). 1536 ** 1537 ** Returns void 1538 ** 1539 *******************************************************************************/ 1540 extern void BTA_DmLocalOob(void); 1541 1542 /******************************************************************************* 1543 ** 1544 ** Function BTA_DmConfirm 1545 ** 1546 ** Description This function accepts or rejects the numerical value of the 1547 ** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT 1548 ** 1549 ** Returns void 1550 ** 1551 *******************************************************************************/ 1552 extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept); 1553 1554 /******************************************************************************* 1555 ** 1556 ** Function BTA_DmAddDevice 1557 ** 1558 ** Description This function adds a device to the security database list 1559 ** of peer devices. This function would typically be called 1560 ** at system startup to initialize the security database with 1561 ** known peer devices. This is a direct execution function 1562 ** that may lock task scheduling on some platforms. 1563 ** 1564 ** Returns void 1565 ** 1566 *******************************************************************************/ 1567 extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, 1568 LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask, 1569 BOOLEAN is_trusted, UINT8 key_type, 1570 tBTA_IO_CAP io_cap, UINT8 pin_length); 1571 1572 /******************************************************************************* 1573 ** 1574 ** Function BTA_DmRemoveDevice 1575 ** 1576 ** Description This function removes a device from the security database. 1577 ** This is a direct execution function that may lock task 1578 ** scheduling on some platforms. 1579 ** 1580 ** 1581 ** Returns BTA_SUCCESS if successful. 1582 ** BTA_FAIL if operation failed. 1583 ** 1584 *******************************************************************************/ 1585 extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr); 1586 1587 /******************************************************************************* 1588 ** 1589 ** Function BTA_GetEirService 1590 ** 1591 ** Description This function is called to get BTA service mask from EIR. 1592 ** 1593 ** Parameters p_eir - pointer of EIR significant part 1594 ** p_services - return the BTA service mask 1595 ** 1596 ** Returns None 1597 ** 1598 *******************************************************************************/ 1599 extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services ); 1600 1601 /******************************************************************************* 1602 ** 1603 ** Function BTA_DmGetConnectionState 1604 ** 1605 ** Description Returns whether the remote device is currently connected. 1606 ** 1607 ** Returns 0 if the device is NOT connected. 1608 ** 1609 *******************************************************************************/ 1610 extern UINT16 BTA_DmGetConnectionState( BD_ADDR bd_addr ); 1611 1612 1613 /******************************************************************************* 1614 ** 1615 ** Function BTA_DmSetLocalDiRecord 1616 ** 1617 ** Description This function adds a DI record to the local SDP database. 1618 ** 1619 ** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. 1620 ** 1621 *******************************************************************************/ 1622 extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info, 1623 UINT32 *p_handle ); 1624 1625 /******************************************************************************* 1626 ** 1627 ** 1628 ** Function BTA_DmCloseACL 1629 ** 1630 ** Description This function force to close an ACL connection and remove the 1631 ** device from the security database list of known devices. 1632 ** 1633 ** Parameters: bd_addr - Address of the peer device 1634 ** remove_dev - remove device or not after link down 1635 ** transport - which transport to close 1636 1637 ** 1638 ** Returns void. 1639 ** 1640 *******************************************************************************/ 1641 extern void BTA_DmCloseACL(BD_ADDR bd_addr, BOOLEAN remove_dev, tBTA_TRANSPORT transport); 1642 1643 /******************************************************************************* 1644 ** 1645 ** Function bta_dmexecutecallback 1646 ** 1647 ** Description This function will request BTA to execute a call back in the context of BTU task 1648 ** This API was named in lower case because it is only intended 1649 ** for the internal customers(like BTIF). 1650 ** 1651 ** Returns void 1652 ** 1653 *******************************************************************************/ 1654 extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param); 1655 1656 #if (BTM_SCO_HCI_INCLUDED == TRUE) 1657 /******************************************************************************* 1658 ** 1659 ** Function BTA_DmPcmInitSamples 1660 ** 1661 ** Description initialize the down sample converter. 1662 ** 1663 ** src_sps: original samples per second (source audio data) 1664 ** (ex. 44100, 48000) 1665 ** bits: number of bits per pcm sample (16) 1666 ** n_channels: number of channels (i.e. mono(1), stereo(2)...) 1667 ** 1668 ** Returns none 1669 ** 1670 *******************************************************************************/ 1671 extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels); 1672 1673 /************************************************************************************** 1674 ** Function BTA_DmPcmResample 1675 ** 1676 ** Description Down sampling utility to convert higher sampling rate into 8K/16bits 1677 ** PCM samples. 1678 ** 1679 ** Parameters p_src: pointer to the buffer where the original sampling PCM 1680 ** are stored. 1681 ** in_bytes: Length of the input PCM sample buffer in byte. 1682 ** p_dst: pointer to the buffer which is to be used to store 1683 ** the converted PCM samples. 1684 ** 1685 ** 1686 ** Returns INT32: number of samples converted. 1687 ** 1688 **************************************************************************************/ 1689 extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst); 1690 #endif 1691 1692 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1693 /* BLE related API functions */ 1694 /******************************************************************************* 1695 ** 1696 ** Function BTA_DmBleSecurityGrant 1697 ** 1698 ** Description Grant security request access. 1699 ** 1700 ** Parameters: bd_addr - BD address of the peer 1701 ** res - security grant status. 1702 ** 1703 ** Returns void 1704 ** 1705 *******************************************************************************/ 1706 extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res); 1707 1708 1709 1710 /******************************************************************************* 1711 ** 1712 ** Function BTA_DmBleSetBgConnType 1713 ** 1714 ** Description This function is called to set BLE connectable mode for a 1715 ** peripheral device. 1716 ** 1717 ** Parameters bg_conn_type: it can be auto connection, or selective connection. 1718 ** p_select_cback: callback function when selective connection procedure 1719 ** is being used. 1720 ** 1721 ** Returns void 1722 ** 1723 *******************************************************************************/ 1724 extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback); 1725 1726 /******************************************************************************* 1727 ** 1728 ** Function BTA_DmBlePasskeyReply 1729 ** 1730 ** Description Send BLE SMP passkey reply. 1731 ** 1732 ** Parameters: bd_addr - BD address of the peer 1733 ** accept - passkey entry sucessful or declined. 1734 ** passkey - passkey value, must be a 6 digit number, 1735 ** can be lead by 0. 1736 ** 1737 ** Returns void 1738 ** 1739 *******************************************************************************/ 1740 extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey); 1741 1742 /******************************************************************************* 1743 ** 1744 ** Function BTA_DmBleConfirmReply 1745 ** 1746 ** Description Send BLE SMP SC user confirmation reply. 1747 ** 1748 ** Parameters: bd_addr - BD address of the peer 1749 ** accept - numbers to compare are the same or different. 1750 ** 1751 ** Returns void 1752 ** 1753 *******************************************************************************/ 1754 extern void BTA_DmBleConfirmReply(BD_ADDR bd_addr, BOOLEAN accept); 1755 1756 /******************************************************************************* 1757 ** 1758 ** Function BTA_DmAddBleDevice 1759 ** 1760 ** Description Add a BLE device. This function will be normally called 1761 ** during host startup to restore all required information 1762 ** for a LE device stored in the NVRAM. 1763 ** 1764 ** Parameters: bd_addr - BD address of the peer 1765 ** dev_type - Remote device's device type. 1766 ** addr_type - LE device address type. 1767 ** 1768 ** Returns void 1769 ** 1770 *******************************************************************************/ 1771 extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, 1772 tBT_DEVICE_TYPE dev_type); 1773 1774 1775 /******************************************************************************* 1776 ** 1777 ** Function BTA_DmAddBleKey 1778 ** 1779 ** Description Add/modify LE device information. This function will be 1780 ** normally called during host startup to restore all required 1781 ** information stored in the NVRAM. 1782 ** 1783 ** Parameters: bd_addr - BD address of the peer 1784 ** p_le_key - LE key values. 1785 ** key_type - LE SMP key type. 1786 ** 1787 ** Returns void 1788 ** 1789 *******************************************************************************/ 1790 extern void BTA_DmAddBleKey (BD_ADDR bd_addr, 1791 tBTA_LE_KEY_VALUE *p_le_key, 1792 tBTA_LE_KEY_TYPE key_type); 1793 1794 /******************************************************************************* 1795 ** 1796 ** Function BTA_DmSetBlePrefConnParams 1797 ** 1798 ** Description This function is called to set the preferred connection 1799 ** parameters when default connection parameter is not desired. 1800 ** 1801 ** Parameters: bd_addr - BD address of the peripheral 1802 ** min_conn_int - minimum preferred connection interval 1803 ** max_conn_int - maximum preferred connection interval 1804 ** slave_latency - preferred slave latency 1805 ** supervision_tout - preferred supervision timeout 1806 ** 1807 ** 1808 ** Returns void 1809 ** 1810 *******************************************************************************/ 1811 extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr, 1812 UINT16 min_conn_int, UINT16 max_conn_int, 1813 UINT16 slave_latency, UINT16 supervision_tout ); 1814 1815 /******************************************************************************* 1816 ** 1817 ** Function BTA_DmSetBleConnScanParams 1818 ** 1819 ** Description This function is called to set scan parameters used in 1820 ** BLE connection request 1821 ** 1822 ** Parameters: scan_interval - scan interval 1823 ** scan_window - scan window 1824 ** 1825 ** Returns void 1826 ** 1827 *******************************************************************************/ 1828 extern void BTA_DmSetBleConnScanParams(UINT32 scan_interval, 1829 UINT32 scan_window); 1830 1831 /******************************************************************************* 1832 ** 1833 ** Function BTA_DmSetBleScanParams 1834 ** 1835 ** Description This function is called to set scan parameters 1836 ** 1837 ** Parameters: client_if - Client IF 1838 ** scan_interval - scan interval 1839 ** scan_window - scan window 1840 ** scan_mode - scan mode 1841 ** scan_param_setup_status_cback - Set scan param status callback 1842 ** 1843 ** Returns void 1844 ** 1845 *******************************************************************************/ 1846 extern void BTA_DmSetBleScanParams(tGATT_IF client_if, UINT32 scan_interval, 1847 UINT32 scan_window, tBLE_SCAN_MODE scan_mode, 1848 tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_status_cback); 1849 1850 /******************************************************************************* 1851 ** 1852 ** Function BTA_DmSetBleAdvParams 1853 ** 1854 ** Description This function sets the advertising parameters BLE functionality. 1855 ** It is to be called when device act in peripheral or broadcaster 1856 ** role. 1857 ** 1858 ** Parameters: adv_int_min - adv interval minimum 1859 ** adv_int_max - adv interval max 1860 ** p_dir_bda - directed adv initator address 1861 ** 1862 ** Returns void 1863 ** 1864 *******************************************************************************/ 1865 extern void BTA_DmSetBleAdvParams (UINT16 adv_int_min, UINT16 adv_int_max, 1866 tBLE_BD_ADDR *p_dir_bda); 1867 /******************************************************************************* 1868 ** 1869 ** Function BTA_DmSearchExt 1870 ** 1871 ** Description This function searches for peer Bluetooth devices. It performs 1872 ** an inquiry and gets the remote name for devices. Service 1873 ** discovery is done if services is non zero 1874 ** 1875 ** Parameters p_dm_inq: inquiry conditions 1876 ** services: if service is not empty, service discovery will be done. 1877 ** for all GATT based service condition, put num_uuid, and 1878 ** p_uuid is the pointer to the list of UUID values. 1879 ** p_cback: callback functino when search is completed. 1880 ** 1881 ** 1882 ** 1883 ** Returns void 1884 ** 1885 *******************************************************************************/ 1886 extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, 1887 tBTA_DM_SEARCH_CBACK *p_cback); 1888 1889 /******************************************************************************* 1890 ** 1891 ** Function BTA_DmDiscoverExt 1892 ** 1893 ** Description This function does service discovery for services of a 1894 ** peer device. When services.num_uuid is 0, it indicates all 1895 ** GATT based services are to be searched; other wise a list of 1896 ** UUID of interested services should be provided through 1897 ** services.p_uuid. 1898 ** 1899 ** 1900 ** 1901 ** Returns void 1902 ** 1903 *******************************************************************************/ 1904 extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, 1905 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); 1906 1907 /******************************************************************************* 1908 ** 1909 ** Function BTA_DmDiscoverByTransport 1910 ** 1911 ** Description This function does service discovery on particular transport 1912 ** for services of a 1913 ** peer device. When services.num_uuid is 0, it indicates all 1914 ** GATT based services are to be searched; other wise a list of 1915 ** UUID of interested services should be provided through 1916 ** p_services->p_uuid. 1917 ** 1918 ** 1919 ** 1920 ** Returns void 1921 ** 1922 *******************************************************************************/ 1923 extern void BTA_DmDiscoverByTransport(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, 1924 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search, 1925 tBTA_TRANSPORT transport); 1926 1927 /******************************************************************************* 1928 ** 1929 ** Function BTA_DmSetEncryption 1930 ** 1931 ** Description This function is called to ensure that connection is 1932 ** encrypted. Should be called only on an open connection. 1933 ** Typically only needed for connections that first want to 1934 ** bring up unencrypted links, then later encrypt them. 1935 ** 1936 ** Parameters: bd_addr - Address of the peer device 1937 ** transport - transport of the link to be encruypted 1938 ** p_callback - Pointer to callback function to indicat the 1939 ** link encryption status 1940 ** sec_act - This is the security action to indicate 1941 ** what knid of BLE security level is required for 1942 ** the BLE link if the BLE is supported 1943 ** Note: This parameter is ignored for the BR/EDR link 1944 ** or the BLE is not supported 1945 ** 1946 ** Returns void 1947 ** 1948 ** 1949 *******************************************************************************/ 1950 extern void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_TRANSPORT transport, 1951 tBTA_DM_ENCRYPT_CBACK *p_callback, 1952 tBTA_DM_BLE_SEC_ACT sec_act); 1953 1954 1955 /******************************************************************************* 1956 ** 1957 ** Function BTA_DmBleObserve 1958 ** 1959 ** Description This procedure keep the device listening for advertising 1960 ** events from a broadcast device. 1961 ** 1962 ** Parameters start: start or stop observe. 1963 ** duration : Duration of the scan. Continuous scan if 0 is passed 1964 ** p_results_cb: Callback to be called with scan results 1965 ** 1966 ** Returns void 1967 ** 1968 *******************************************************************************/ 1969 extern void BTA_DmBleObserve(BOOLEAN start, UINT8 duration, 1970 tBTA_DM_SEARCH_CBACK *p_results_cb); 1971 1972 1973 #endif 1974 1975 #if BLE_INCLUDED == TRUE 1976 /******************************************************************************* 1977 ** 1978 ** Function BTA_DmBleConfigLocalPrivacy 1979 ** 1980 ** Description Enable/disable privacy on the local device 1981 ** 1982 ** Parameters: privacy_enable - enable/disabe privacy on remote device. 1983 ** 1984 ** Returns void 1985 ** 1986 *******************************************************************************/ 1987 extern void BTA_DmBleConfigLocalPrivacy(BOOLEAN privacy_enable); 1988 1989 /******************************************************************************* 1990 ** 1991 ** Function BTA_DmBleEnableRemotePrivacy 1992 ** 1993 ** Description Enable/disable privacy on a remote device 1994 ** 1995 ** Parameters: bd_addr - BD address of the peer 1996 ** privacy_enable - enable/disabe privacy on remote device. 1997 ** 1998 ** Returns void 1999 ** 2000 *******************************************************************************/ 2001 extern void BTA_DmBleEnableRemotePrivacy(BD_ADDR bd_addr, BOOLEAN privacy_enable); 2002 2003 2004 /******************************************************************************* 2005 ** 2006 ** Function BTA_DmBleSetAdvConfig 2007 ** 2008 ** Description This function is called to override the BTA default ADV parameters. 2009 ** 2010 ** Parameters Pointer to User defined ADV data structure 2011 ** 2012 ** Returns None 2013 ** 2014 *******************************************************************************/ 2015 extern void BTA_DmBleSetAdvConfig (tBTA_BLE_AD_MASK data_mask, 2016 tBTA_BLE_ADV_DATA *p_adv_cfg, 2017 tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback); 2018 2019 /******************************************************************************* 2020 ** 2021 ** Function BTA_DmBleSetScanRsp 2022 ** 2023 ** Description This function is called to override the BTA scan response. 2024 ** 2025 ** Parameters Pointer to User defined ADV data structure 2026 ** 2027 ** Returns None 2028 ** 2029 *******************************************************************************/ 2030 extern void BTA_DmBleSetScanRsp (tBTA_BLE_AD_MASK data_mask, 2031 tBTA_BLE_ADV_DATA *p_adv_cfg, 2032 tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback); 2033 2034 /******************************************************************************* 2035 ** 2036 ** Function BTA_DmBleBroadcast 2037 ** 2038 ** Description This function starts or stops LE broadcasting. 2039 ** 2040 ** Parameters start: start or stop broadcast. 2041 ** 2042 ** Returns None 2043 ** 2044 *******************************************************************************/ 2045 extern void BTA_DmBleBroadcast (BOOLEAN start); 2046 2047 2048 /******************************************************************************* 2049 ** 2050 ** Function BTA_BleEnableAdvInstance 2051 ** 2052 ** Description This function enables the Multi ADV instance feature 2053 ** 2054 ** Parameters p_params Pointer to ADV param user defined structure 2055 ** p_cback Pointer to Multi ADV callback structure 2056 ** p_ref - Reference pointer 2057 ** 2058 ** Returns None 2059 ** 2060 *******************************************************************************/ 2061 extern void BTA_BleEnableAdvInstance (tBTA_BLE_ADV_PARAMS *p_params, 2062 tBTA_BLE_MULTI_ADV_CBACK *p_cback,void *p_ref); 2063 2064 /******************************************************************************* 2065 ** 2066 ** Function BTA_BleUpdateAdvInstParam 2067 ** 2068 ** Description This function updates the Multi ADV instance params 2069 ** 2070 ** Parameters inst_id Instance ID 2071 ** p_params Pointer to ADV param user defined structure 2072 ** 2073 ** Returns None 2074 ** 2075 *******************************************************************************/ 2076 extern void BTA_BleUpdateAdvInstParam (UINT8 inst_id, 2077 tBTA_BLE_ADV_PARAMS *p_params); 2078 2079 /******************************************************************************* 2080 ** 2081 ** Function BTA_BleCfgAdvInstData 2082 ** 2083 ** Description This function is called to configure the ADV instance data 2084 ** 2085 ** Parameters inst_id - Instance ID 2086 ** is_scan_rsp - Boolean value Scan response 2087 ** Pointer to User defined ADV data structure 2088 ** Returns None 2089 ** 2090 *******************************************************************************/ 2091 extern void BTA_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp, 2092 tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_data); 2093 2094 /******************************************************************************* 2095 ** 2096 ** Function BTA_BleDisableAdvInstance 2097 ** 2098 ** Description This function is called to disable the ADV instance 2099 ** 2100 ** Parameters inst_id - Instance ID to be disabled 2101 ** 2102 ** Returns None 2103 ** 2104 *******************************************************************************/ 2105 extern void BTA_BleDisableAdvInstance(UINT8 inst_id); 2106 2107 /******************************************************************************* 2108 ** 2109 ** Function BTA_DmBleUpdateConnectionParams 2110 ** 2111 ** Description Update connection parameters, can only be used when connection is up. 2112 ** 2113 ** Parameters: bd_addr - BD address of the peer 2114 ** min_int - minimum connection interval, [0x0004~ 0x4000] 2115 ** max_int - maximum connection interval, [0x0004~ 0x4000] 2116 ** latency - slave latency [0 ~ 500] 2117 ** timeout - supervision timeout [0x000a ~ 0xc80] 2118 ** 2119 ** Returns void 2120 ** 2121 *******************************************************************************/ 2122 extern void BTA_DmBleUpdateConnectionParams(BD_ADDR bd_addr, UINT16 min_int, 2123 UINT16 max_int, UINT16 latency, UINT16 timeout); 2124 2125 /******************************************************************************* 2126 ** 2127 ** Function BTA_DmBleSetDataLength 2128 ** 2129 ** Description This function is to set maximum LE data packet size 2130 ** 2131 ** Returns void 2132 ** 2133 *******************************************************************************/ 2134 extern void BTA_DmBleSetDataLength(BD_ADDR remote_device, UINT16 tx_data_length); 2135 2136 /******************************************************************************* 2137 ** 2138 ** Function BTA_DmBleSetStorageParams 2139 ** 2140 ** Description This function is called to set the storage parameters 2141 ** 2142 ** Parameters batch_scan_full_max -Max storage space (in %) allocated to full scanning 2143 ** batch_scan_trunc_max -Max storage space (in %) allocated to truncated scanning 2144 ** batch_scan_notify_threshold - Setup notification level based on total space 2145 ** consumed by both pools. Setting it to 0 will disable threshold notification 2146 ** p_setup_cback - Setup callback 2147 ** p_thres_cback - Threshold callback 2148 ** p_rep_cback - Reports callback 2149 ** ref_value - Reference value 2150 ** 2151 ** Returns None 2152 ** 2153 *******************************************************************************/ 2154 extern void BTA_DmBleSetStorageParams(UINT8 batch_scan_full_max, 2155 UINT8 batch_scan_trunc_max, 2156 UINT8 batch_scan_notify_threshold, 2157 tBTA_BLE_SCAN_SETUP_CBACK *p_setup_cback, 2158 tBTA_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback, 2159 tBTA_BLE_SCAN_REP_CBACK* p_rep_cback, 2160 tBTA_DM_BLE_REF_VALUE ref_value); 2161 2162 /******************************************************************************* 2163 ** 2164 ** Function BTA_DmBleEnableBatchScan 2165 ** 2166 ** Description This function is called to enable the batch scan 2167 ** 2168 ** Parameters scan_mode -Batch scan mode 2169 ** scan_interval - Scan interval 2170 ** scan_window - Scan window 2171 ** discard_rule -Discard rules 2172 ** addr_type - Address type 2173 ** ref_value - Reference value 2174 ** 2175 ** Returns None 2176 ** 2177 *******************************************************************************/ 2178 extern void BTA_DmBleEnableBatchScan(tBTA_BLE_BATCH_SCAN_MODE scan_mode, 2179 UINT32 scan_interval, UINT32 scan_window, 2180 tBTA_BLE_DISCARD_RULE discard_rule, 2181 tBLE_ADDR_TYPE addr_type, 2182 tBTA_DM_BLE_REF_VALUE ref_value); 2183 2184 /******************************************************************************* 2185 ** 2186 ** Function BTA_DmBleReadScanReports 2187 ** 2188 ** Description This function is called to read the batch scan reports 2189 ** 2190 ** Parameters scan_mode -Batch scan mode 2191 ** ref_value - Reference value 2192 ** 2193 ** Returns None 2194 ** 2195 *******************************************************************************/ 2196 extern void BTA_DmBleReadScanReports(tBTA_BLE_BATCH_SCAN_MODE scan_type, 2197 tBTA_DM_BLE_REF_VALUE ref_value); 2198 2199 /******************************************************************************* 2200 ** 2201 ** Function BTA_DmBleDisableBatchScan 2202 ** 2203 ** Description This function is called to disable the batch scanning 2204 ** 2205 ** Parameters ref_value - Reference value 2206 ** 2207 ** Returns None 2208 ** 2209 *******************************************************************************/ 2210 extern void BTA_DmBleDisableBatchScan(tBTA_DM_BLE_REF_VALUE ref_value); 2211 2212 /******************************************************************************* 2213 ** 2214 ** Function BTA_DmEnableScanFilter 2215 ** 2216 ** Description This function is called to enable the adv data payload filter 2217 ** 2218 ** Parameters action - enable or disable the APCF feature 2219 ** p_cmpl_cback - Command completed callback 2220 ** ref_value - Reference value 2221 ** 2222 ** Returns void 2223 ** 2224 *******************************************************************************/ 2225 extern void BTA_DmEnableScanFilter(UINT8 action, 2226 tBTA_DM_BLE_PF_STATUS_CBACK *p_cmpl_cback, 2227 tBTA_DM_BLE_REF_VALUE ref_value); 2228 2229 /******************************************************************************* 2230 ** 2231 ** Function BTA_DmBleScanFilterSetup 2232 ** 2233 ** Description This function is called to setup the filter params 2234 ** 2235 ** Parameters p_target: enable the filter condition on a target device; if NULL 2236 ** filt_index - Filter index 2237 ** p_filt_params -Filter parameters 2238 ** ref_value - Reference value 2239 ** action - Add, delete or clear 2240 ** p_cmpl_back - Command completed callback 2241 ** 2242 ** Returns void 2243 ** 2244 *******************************************************************************/ 2245 extern void BTA_DmBleScanFilterSetup(UINT8 action, 2246 tBTA_DM_BLE_PF_FILT_INDEX filt_index, 2247 tBTA_DM_BLE_PF_FILT_PARAMS *p_filt_params, 2248 tBLE_BD_ADDR *p_target, 2249 tBTA_DM_BLE_PF_PARAM_CBACK *p_cmpl_cback, 2250 tBTA_DM_BLE_REF_VALUE ref_value); 2251 2252 /******************************************************************************* 2253 ** 2254 ** Function BTA_DmBleCfgFilterCondition 2255 ** 2256 ** Description This function is called to configure the adv data payload filter 2257 ** condition. 2258 ** 2259 ** Parameters action: to read/write/clear 2260 ** cond_type: filter condition type 2261 ** filt_index - Filter index 2262 ** p_cond: filter condition parameter 2263 ** p_cmpl_back - Command completed callback 2264 ** ref_value - Reference value 2265 ** 2266 ** Returns void 2267 ** 2268 *******************************************************************************/ 2269 extern void BTA_DmBleCfgFilterCondition(tBTA_DM_BLE_SCAN_COND_OP action, 2270 tBTA_DM_BLE_PF_COND_TYPE cond_type, 2271 tBTA_DM_BLE_PF_FILT_INDEX filt_index, 2272 tBTA_DM_BLE_PF_COND_PARAM *p_cond, 2273 tBTA_DM_BLE_PF_CFG_CBACK *p_cmpl_cback, 2274 tBTA_DM_BLE_REF_VALUE ref_value); 2275 2276 2277 /******************************************************************************* 2278 ** 2279 ** Function BTA_DmBleTrackAdvertiser 2280 ** 2281 ** Description This function is called to track the advertiser 2282 ** 2283 ** Parameters ref_value - Reference value 2284 ** p_track_adv_cback - ADV callback 2285 ** 2286 ** Returns None 2287 ** 2288 *******************************************************************************/ 2289 extern void BTA_DmBleTrackAdvertiser(tBTA_DM_BLE_REF_VALUE ref_value, 2290 tBTA_BLE_TRACK_ADV_CBACK *p_track_adv_cback); 2291 2292 /******************************************************************************* 2293 ** 2294 ** Function BTA_DmBleGetEnergyInfo 2295 ** 2296 ** Description This function is called to obtain the energy info 2297 ** 2298 ** Parameters p_cmpl_cback - Command complete callback 2299 ** 2300 ** Returns void 2301 ** 2302 *******************************************************************************/ 2303 extern void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK *p_cmpl_cback); 2304 2305 /******************************************************************************* 2306 ** 2307 ** Function BTA_BrcmInit 2308 ** 2309 ** Description This function initializes Broadcom specific VS handler in BTA 2310 ** 2311 ** Returns void 2312 ** 2313 *******************************************************************************/ 2314 extern void BTA_VendorInit (void); 2315 2316 /******************************************************************************* 2317 ** 2318 ** Function BTA_BrcmCleanup 2319 ** 2320 ** Description This function frees up Broadcom specific VS specific dynamic memory 2321 ** 2322 ** Returns void 2323 ** 2324 *******************************************************************************/ 2325 extern void BTA_VendorCleanup (void); 2326 2327 #endif 2328 2329 #ifdef __cplusplus 2330 } 2331 #endif 2332 2333 #endif /* BTA_API_H */ 2334
