Lines Matching refs:network
19 # file whenever configuration is changed (e.g., new network block is added with
26 # global configuration (shared by all network blocks)
46 # possible to run wpa_supplicant as root (since it needs to change network
49 # change the network configuration, this access needs to be protected in many
95 # the currently enabled networks are found, a new network (IBSS or AP mode
105 # the network blocks in the configuration file are tried one by one until
106 # the driver reports successful association; each network block should have
111 # For finding networks using hidden SSID, scan_ssid=1 in the network block can
113 # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
116 # networks are found, a new IBSS or AP mode network is created.
119 # Whether to force passive scan for network connection
128 # for network connection cases. It should be noted that this will slow
195 # loaded here before being used in the network blocks. By default, EAP methods
254 # 6-0050F204-1 (Network Infrastructure / AP)
296 # This priority value will be set to each network profile that is added
357 # with the global okc=1 parameter or with the per-network
359 # can be disabled with per-network proactive_key_caching=0 parameter.
365 # the global pmf=1/2 parameter or with the per-network
367 # per-network ieee80211w parameter. This global default value does not apply
380 # Default value for DTIM period (if not overridden in network block)
383 # Default value for Beacon interval (if not overridden in network block)
412 # the per-network mac_addr parameter. Global mac_addr=1 can be used to
445 # Automatic network selection behavior
446 # 0 = do not automatically go through Interworking network selection
448 # 1 = perform Interworking network selection if one or more
450 # matching network block
477 # Each credential used for automatic network selection is configured as a set
488 # (and similarly in struct wpa_ssid for network blocks) to change the
490 # network (based on either an enabled network block or a credential)
497 # username: Username for Interworking network selection
499 # password: Password for Interworking network selection
501 # ca_cert: CA certificate for Interworking network selection
560 # Consortium to match the network, the EAP parameters need to be
577 # matching with the network. Multiple entries can be used to specify more
606 # This value is used as the maximum channel utilization for network
614 # a roaming network shall support (include explicitly in Connection
617 # network connection. This policy is not used in home networks.
699 # network block
701 # Each network (usually AP's sharing the same SSID) is configured as a separate
702 # block in this configuration file. The network blocks are in preference order
705 # network block fields:
708 # 0 = this network can be used (default)
709 # 1 = this network block is disabled (can be enabled through ctrl_iface,
712 # id_str: Network identifier string for external scripts. This value is passed
714 # variable to make it easier to do network specific configuration.
716 # ssid: SSID (mandatory); network name in one of the optional formats:
727 # bssid: BSSID (optional); if set, this network block is used only when
735 # priority value, the sooner the network is matched against the scan results).
749 # deprecated. WPA-None requires following network block options:
757 # an IBSS network with the configured SSID is already present, the frequency of
758 # the network will be used instead of this configured value.
768 # P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in IEEE 802.11ad network.
773 # BSS. If the subset of channels used by the network is known, this option can
774 # be used to optimize scanning to not occur on channels that the network does
782 # This can also be set on the outside of the network block. In this case,
789 # single network block with all the APs using the same SSID). The bgscan
796 # learn - Learn channels used by the network and try to avoid bgscans on other
804 # This option can also be set outside of all network blocks for the bgscan
851 # LEAP = LEAP/Network EAP (only used with LEAP)
1177 # small enough to make the EAP messages fit in MTU of the network
1339 network={
1347 network={
1355 network={
1366 network={
1378 network={
1395 network={
1409 network={
1422 network={
1435 network={
1453 network={
1465 network={
1472 network={
1482 network={
1495 network={
1509 network={
1518 network={
1527 network={
1538 network={
1550 network={
1557 network={
1570 network={
1582 # IBSS/ad-hoc network with RSN
1583 network={
1594 # IBSS/ad-hoc network with WPA-None/TKIP (deprecated)
1595 network={
1606 # open mesh network
1607 network={
1614 # secure (SAE + AMPE) network
1615 network={
1625 network={
1643 network={
1664 network={
1682 network={
1687 # for this network.
1688 network={
1696 network={
1704 network={
1710 #network={
