1 /** @file 2 The EFI_ATA_PASS_THRU_PROTOCOL provides information about an ATA controller and the ability 3 to send ATA Command Blocks to any ATA device attached to that ATA controller. The information 4 includes the attributes of the ATA controller. 5 6 Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR> 7 This program and the accompanying materials 8 are licensed and made available under the terms and conditions of the BSD License 9 which accompanies this distribution. The full text of the license may be found at 10 http://opensource.org/licenses/bsd-license.php 11 12 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 13 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 14 15 **/ 16 17 #ifndef __ATA_PASS_THROUGH_H__ 18 #define __ATA_PASS_THROUGH_H__ 19 20 #define EFI_ATA_PASS_THRU_PROTOCOL_GUID \ 21 { \ 22 0x1d3de7f0, 0x807, 0x424f, {0xaa, 0x69, 0x11, 0xa5, 0x4e, 0x19, 0xa4, 0x6f } \ 23 } 24 25 typedef struct _EFI_ATA_PASS_THRU_PROTOCOL EFI_ATA_PASS_THRU_PROTOCOL; 26 27 typedef struct { 28 UINT32 Attributes; 29 UINT32 IoAlign; 30 } EFI_ATA_PASS_THRU_MODE; 31 32 /// 33 /// If this bit is set, then the EFI_ATA_PASS_THRU_PROTOCOL interface is for physical 34 /// devices on the ATA controller. 35 /// 36 #define EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001 37 /// 38 /// If this bit is set, then the EFI_ATA_PASS_THRU_PROTOCOL interface is for logical 39 /// devices on the ATA controller. 40 /// 41 #define EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002 42 /// 43 /// If this bit is set, then the EFI_ATA_PASS_THRU_PROTOCOL interface supports non blocking 44 /// I/O. Every EFI_ATA_PASS_THRU_PROTOCOL must support blocking I/O. The support of non-blocking 45 /// I/O is optional. 46 /// 47 #define EFI_ATA_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004 48 49 typedef struct _EFI_ATA_COMMAND_BLOCK { 50 UINT8 Reserved1[2]; 51 UINT8 AtaCommand; 52 UINT8 AtaFeatures; 53 UINT8 AtaSectorNumber; 54 UINT8 AtaCylinderLow; 55 UINT8 AtaCylinderHigh; 56 UINT8 AtaDeviceHead; 57 UINT8 AtaSectorNumberExp; 58 UINT8 AtaCylinderLowExp; 59 UINT8 AtaCylinderHighExp; 60 UINT8 AtaFeaturesExp; 61 UINT8 AtaSectorCount; 62 UINT8 AtaSectorCountExp; 63 UINT8 Reserved2[6]; 64 } EFI_ATA_COMMAND_BLOCK; 65 66 typedef struct _EFI_ATA_STATUS_BLOCK { 67 UINT8 Reserved1[2]; 68 UINT8 AtaStatus; 69 UINT8 AtaError; 70 UINT8 AtaSectorNumber; 71 UINT8 AtaCylinderLow; 72 UINT8 AtaCylinderHigh; 73 UINT8 AtaDeviceHead; 74 UINT8 AtaSectorNumberExp; 75 UINT8 AtaCylinderLowExp; 76 UINT8 AtaCylinderHighExp; 77 UINT8 Reserved2; 78 UINT8 AtaSectorCount; 79 UINT8 AtaSectorCountExp; 80 UINT8 Reserved3[6]; 81 } EFI_ATA_STATUS_BLOCK; 82 83 typedef UINT8 EFI_ATA_PASS_THRU_CMD_PROTOCOL; 84 85 #define EFI_ATA_PASS_THRU_PROTOCOL_ATA_HARDWARE_RESET 0x00 86 #define EFI_ATA_PASS_THRU_PROTOCOL_ATA_SOFTWARE_RESET 0x01 87 #define EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA 0x02 88 #define EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN 0x04 89 #define EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT 0x05 90 #define EFI_ATA_PASS_THRU_PROTOCOL_DMA 0x06 91 #define EFI_ATA_PASS_THRU_PROTOCOL_DMA_QUEUED 0x07 92 #define EFI_ATA_PASS_THRU_PROTOCOL_DEVICE_DIAGNOSTIC 0x08 93 #define EFI_ATA_PASS_THRU_PROTOCOL_DEVICE_RESET 0x09 94 #define EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN 0x0A 95 #define EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT 0x0B 96 #define EFI_ATA_PASS_THRU_PROTOCOL_FPDMA 0x0C 97 #define EFI_ATA_PASS_THRU_PROTOCOL_RETURN_RESPONSE 0xFF 98 99 typedef UINT8 EFI_ATA_PASS_THRU_LENGTH; 100 101 #define EFI_ATA_PASS_THRU_LENGTH_BYTES 0x80 102 103 104 #define EFI_ATA_PASS_THRU_LENGTH_MASK 0x70 105 #define EFI_ATA_PASS_THRU_LENGTH_NO_DATA_TRANSFER 0x00 106 #define EFI_ATA_PASS_THRU_LENGTH_FEATURES 0x10 107 #define EFI_ATA_PASS_THRU_LENGTH_SECTOR_COUNT 0x20 108 #define EFI_ATA_PASS_THRU_LENGTH_TPSIU 0x30 109 110 #define EFI_ATA_PASS_THRU_LENGTH_COUNT 0x0F 111 112 typedef struct { 113 /// 114 /// A pointer to the sense data that was generated by the execution of the ATA 115 /// command. It must be aligned to the boundary specified in the IoAlign field 116 /// in the EFI_ATA_PASS_THRU_MODE structure. 117 /// 118 EFI_ATA_STATUS_BLOCK *Asb; 119 /// 120 /// A pointer to buffer that contains the Command Data Block to send to the ATA 121 /// device specified by Port and PortMultiplierPort. 122 /// 123 EFI_ATA_COMMAND_BLOCK *Acb; 124 /// 125 /// The timeout, in 100 ns units, to use for the execution of this ATA command. 126 /// A Timeout value of 0 means that this function will wait indefinitely for the 127 /// ATA command to execute. If Timeout is greater than zero, then this function 128 /// will return EFI_TIMEOUT if the time required to execute the ATA command is 129 /// greater than Timeout. 130 /// 131 UINT64 Timeout; 132 /// 133 /// A pointer to the data buffer to transfer between the ATA controller and the 134 /// ATA device for read and bidirectional commands. For all write and non data 135 /// commands where InTransferLength is 0 this field is optional and may be NULL. 136 /// If this field is not NULL, then it must be aligned on the boundary specified 137 /// by the IoAlign field in the EFI_ATA_PASS_THRU_MODE structure. 138 /// 139 VOID *InDataBuffer; 140 /// 141 /// A pointer to the data buffer to transfer between the ATA controller and the 142 /// ATA device for write or bidirectional commands. For all read and non data 143 /// commands where OutTransferLength is 0 this field is optional and may be NULL. 144 /// If this field is not NULL, then it must be aligned on the boundary specified 145 /// by the IoAlign field in the EFI_ATA_PASS_THRU_MODE structure. 146 /// 147 VOID *OutDataBuffer; 148 /// 149 /// On input, the size, in bytes, of InDataBuffer. On output, the number of bytes 150 /// transferred between the ATA controller and the ATA device. If InTransferLength 151 /// is larger than the ATA controller can handle, no data will be transferred, 152 /// InTransferLength will be updated to contain the number of bytes that the ATA 153 /// controller is able to transfer, and EFI_BAD_BUFFER_SIZE will be returned. 154 /// 155 UINT32 InTransferLength; 156 /// 157 /// On Input, the size, in bytes of OutDataBuffer. On Output, the Number of bytes 158 /// transferred between ATA Controller and the ATA device. If OutTransferLength is 159 /// larger than the ATA controller can handle, no data will be transferred, 160 /// OutTransferLength will be updated to contain the number of bytes that the ATA 161 /// controller is able to transfer, and EFI_BAD_BUFFER_SIZE will be returned. 162 /// 163 UINT32 OutTransferLength; 164 /// 165 /// Specifies the protocol used when the ATA device executes the command. 166 /// 167 EFI_ATA_PASS_THRU_CMD_PROTOCOL Protocol; 168 /// 169 /// Specifies the way in which the ATA command length is encoded. 170 /// 171 EFI_ATA_PASS_THRU_LENGTH Length; 172 } EFI_ATA_PASS_THRU_COMMAND_PACKET; 173 174 175 /** 176 Sends an ATA command to an ATA device that is attached to the ATA controller. This function 177 supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, 178 and the non-blocking I/O functionality is optional. 179 180 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 181 @param[in] Port The port number of the ATA device to send the command. 182 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. 183 If there is no port multiplier, then specify 0. 184 @param[in,out] Packet A pointer to the ATA command to send to the ATA device specified by Port 185 and PortMultiplierPort. 186 @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking 187 I/O is performed. If Event is NULL, then blocking I/O is performed. If 188 Event is not NULL and non blocking I/O is supported, then non-blocking 189 I/O is performed, and Event will be signaled when the ATA command completes. 190 191 @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands, 192 InTransferLength bytes were transferred from InDataBuffer. For write and 193 bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer. 194 @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred 195 is returned in InTransferLength. For write and bi-directional commands, 196 OutTransferLength bytes were transferred by OutDataBuffer. 197 @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands 198 already queued. The caller may retry again later. 199 @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command. 200 @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA 201 command was not sent, so no additional status information is available. 202 203 **/ 204 typedef 205 EFI_STATUS 206 (EFIAPI *EFI_ATA_PASS_THRU_PASSTHRU)( 207 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 208 IN UINT16 Port, 209 IN UINT16 PortMultiplierPort, 210 IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet, 211 IN EFI_EVENT Event OPTIONAL 212 ); 213 214 /** 215 Used to retrieve the list of legal port numbers for ATA devices on an ATA controller. 216 These can either be the list of ports where ATA devices are actually present or the 217 list of legal port numbers for the ATA controller. Regardless, the caller of this 218 function must probe the port number returned to see if an ATA device is actually 219 present at that location on the ATA controller. 220 221 The GetNextPort() function retrieves the port number on an ATA controller. If on input 222 Port is 0xFFFF, then the port number of the first port on the ATA controller is returned 223 in Port and EFI_SUCCESS is returned. 224 225 If Port is a port number that was returned on a previous call to GetNextPort(), then the 226 port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS 227 is returned. If Port is not 0xFFFF and Port was not returned on a previous call to 228 GetNextPort(), then EFI_INVALID_PARAMETER is returned. 229 230 If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is 231 returned. 232 233 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 234 @param[in,out] Port On input, a pointer to the port number on the ATA controller. 235 On output, a pointer to the next port number on the ATA 236 controller. An input value of 0xFFFF retrieves the first port 237 number on the ATA controller. 238 239 @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port. 240 @retval EFI_NOT_FOUND There are no more ports on this ATA controller. 241 @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call 242 to GetNextPort(). 243 244 **/ 245 typedef 246 EFI_STATUS 247 (EFIAPI *EFI_ATA_PASS_THRU_GET_NEXT_PORT)( 248 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 249 IN OUT UINT16 *Port 250 ); 251 252 /** 253 Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA 254 controller. These can either be the list of port multiplier ports where ATA devices are actually 255 present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this 256 function must probe the port number and port multiplier port number returned to see if an ATA 257 device is actually present. 258 259 The GetNextDevice() function retrieves the port multiplier port number of an ATA device 260 present on a port of an ATA controller. 261 262 If PortMultiplierPort points to a port multiplier port number value that was returned on a 263 previous call to GetNextDevice(), then the port multiplier port number of the next ATA device 264 on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is 265 returned. 266 267 If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first 268 ATA device on port of the ATA controller is returned in PortMultiplierPort and 269 EFI_SUCCESS is returned. 270 271 If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort 272 was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER 273 is returned. 274 275 If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of 276 the ATA controller, then EFI_NOT_FOUND is returned. 277 278 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 279 @param[in] Port The port number present on the ATA controller. 280 @param[in,out] PortMultiplierPort On input, a pointer to the port multiplier port number of an 281 ATA device present on the ATA controller. 282 If on input a PortMultiplierPort of 0xFFFF is specified, 283 then the port multiplier port number of the first ATA device 284 is returned. On output, a pointer to the port multiplier port 285 number of the next ATA device present on an ATA controller. 286 287 @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port 288 of the ATA controller was returned in PortMultiplierPort. 289 @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller. 290 @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not 291 returned on a previous call to GetNextDevice(). 292 293 **/ 294 typedef 295 EFI_STATUS 296 (EFIAPI *EFI_ATA_PASS_THRU_GET_NEXT_DEVICE)( 297 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 298 IN UINT16 Port, 299 IN OUT UINT16 *PortMultiplierPort 300 ); 301 302 /** 303 Used to allocate and build a device path node for an ATA device on an ATA controller. 304 305 The BuildDevicePath() function allocates and builds a single device node for the ATA 306 device specified by Port and PortMultiplierPort. If the ATA device specified by Port and 307 PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned. 308 If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough 309 resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned. 310 311 Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of 312 DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort, 313 and EFI_SUCCESS is returned. 314 315 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 316 @param[in] Port Port specifies the port number of the ATA device for which a 317 device path node is to be allocated and built. 318 @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a 319 device path node is to be allocated and built. If there is no 320 port multiplier, then specify 0. 321 @param[in,out] DevicePath A pointer to a single device path node that describes the ATA 322 device specified by Port and PortMultiplierPort. This function 323 is responsible for allocating the buffer DevicePath with the 324 boot service AllocatePool(). It is the caller's responsibility 325 to free DevicePath when the caller is finished with DevicePath. 326 @retval EFI_SUCCESS The device path node that describes the ATA device specified by 327 Port and PortMultiplierPort was allocated and returned in DevicePath. 328 @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not 329 exist on the ATA controller. 330 @retval EFI_INVALID_PARAMETER DevicePath is NULL. 331 @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. 332 333 **/ 334 typedef 335 EFI_STATUS 336 (EFIAPI *EFI_ATA_PASS_THRU_BUILD_DEVICE_PATH)( 337 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 338 IN UINT16 Port, 339 IN UINT16 PortMultiplierPort, 340 IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath 341 ); 342 343 /** 344 Used to translate a device path node to a port number and port multiplier port number. 345 346 The GetDevice() function determines the port and port multiplier port number associated with 347 the ATA device described by DevicePath. If DevicePath is a device path node type that the 348 ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents 349 DevicePath into a port number and port multiplier port number. 350 351 If this translation is successful, then that port number and port multiplier port number are returned 352 in Port and PortMultiplierPort, and EFI_SUCCESS is returned. 353 354 If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned. 355 356 If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then 357 EFI_UNSUPPORTED is returned. 358 359 If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not 360 a valid translation from DevicePath to a port number and port multiplier port number, then 361 EFI_NOT_FOUND is returned. 362 363 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 364 @param[in] DevicePath A pointer to the device path node that describes an ATA device on the 365 ATA controller. 366 @param[out] Port On return, points to the port number of an ATA device on the ATA controller. 367 @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device 368 on the ATA controller. 369 370 @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier 371 port number, and they were returned in Port and PortMultiplierPort. 372 @retval EFI_INVALID_PARAMETER DevicePath is NULL. 373 @retval EFI_INVALID_PARAMETER Port is NULL. 374 @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL. 375 @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath. 376 @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier 377 port number does not exist. 378 **/ 379 typedef 380 EFI_STATUS 381 (EFIAPI *EFI_ATA_PASS_THRU_GET_DEVICE)( 382 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 383 IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, 384 OUT UINT16 *Port, 385 OUT UINT16 *PortMultiplierPort 386 ); 387 388 /** 389 Resets a specific port on the ATA controller. This operation also resets all the ATA devices 390 connected to the port. 391 392 The ResetChannel() function resets an a specific port on an ATA controller. This operation 393 resets all the ATA devices connected to that port. If this ATA controller does not support 394 a reset port operation, then EFI_UNSUPPORTED is returned. 395 396 If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is 397 returned. 398 399 If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned. 400 401 If the port reset operation is completed, then EFI_SUCCESS is returned. 402 403 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 404 @param[in] Port The port number on the ATA controller. 405 406 @retval EFI_SUCCESS The ATA controller port was reset. 407 @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation. 408 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port. 409 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port. 410 411 **/ 412 typedef 413 EFI_STATUS 414 (EFIAPI *EFI_ATA_PASS_THRU_RESET_PORT)( 415 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 416 IN UINT16 Port 417 ); 418 419 /** 420 Resets an ATA device that is connected to an ATA controller. 421 422 The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort. 423 If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is 424 returned. 425 426 If Port or PortMultiplierPort are not in a valid range for this ATA controller, then 427 EFI_INVALID_PARAMETER is returned. 428 429 If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR 430 is returned. 431 432 If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is 433 returned. 434 435 If the device reset operation is completed, then EFI_SUCCESS is returned. 436 437 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. 438 @param[in] Port Port represents the port number of the ATA device to be reset. 439 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset. 440 If there is no port multiplier, then specify 0. 441 @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset. 442 @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation. 443 @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid. 444 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device 445 specified by Port and PortMultiplierPort. 446 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device 447 specified by Port and PortMultiplierPort. 448 449 **/ 450 typedef 451 EFI_STATUS 452 (EFIAPI *EFI_ATA_PASS_THRU_RESET_DEVICE)( 453 IN EFI_ATA_PASS_THRU_PROTOCOL *This, 454 IN UINT16 Port, 455 IN UINT16 PortMultiplierPort 456 ); 457 458 struct _EFI_ATA_PASS_THRU_PROTOCOL { 459 EFI_ATA_PASS_THRU_MODE *Mode; 460 EFI_ATA_PASS_THRU_PASSTHRU PassThru; 461 EFI_ATA_PASS_THRU_GET_NEXT_PORT GetNextPort; 462 EFI_ATA_PASS_THRU_GET_NEXT_DEVICE GetNextDevice; 463 EFI_ATA_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath; 464 EFI_ATA_PASS_THRU_GET_DEVICE GetDevice; 465 EFI_ATA_PASS_THRU_RESET_PORT ResetPort; 466 EFI_ATA_PASS_THRU_RESET_DEVICE ResetDevice; 467 }; 468 469 extern EFI_GUID gEfiAtaPassThruProtocolGuid; 470 471 #endif 472
