1 /* 2 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * Redistributions of source code must retain the above copyright notice, this 8 * list of conditions and the following disclaimer. 9 * 10 * Redistributions in binary form must reproduce the above copyright notice, 11 * this list of conditions and the following disclaimer in the documentation 12 * and/or other materials provided with the distribution. 13 * 14 * Neither the name of ARM nor the names of its contributors may be used 15 * to endorse or promote products derived from this software without specific 16 * prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #ifndef __RUNTIME_SVC_H__ 32 #define __RUNTIME_SVC_H__ 33 34 /******************************************************************************* 35 * Bit definitions inside the function id as per the SMC calling convention 36 ******************************************************************************/ 37 #define FUNCID_TYPE_SHIFT 31 38 #define FUNCID_CC_SHIFT 30 39 #define FUNCID_OEN_SHIFT 24 40 #define FUNCID_NUM_SHIFT 0 41 42 #define FUNCID_TYPE_MASK 0x1 43 #define FUNCID_CC_MASK 0x1 44 #define FUNCID_OEN_MASK 0x3f 45 #define FUNCID_NUM_MASK 0xffff 46 47 #define FUNCID_TYPE_WIDTH 1 48 #define FUNCID_CC_WIDTH 1 49 #define FUNCID_OEN_WIDTH 6 50 #define FUNCID_NUM_WIDTH 16 51 52 #define GET_SMC_CC(id) ((id >> FUNCID_CC_SHIFT) & \ 53 FUNCID_CC_MASK) 54 #define GET_SMC_TYPE(id) ((id >> FUNCID_TYPE_SHIFT) & \ 55 FUNCID_TYPE_MASK) 56 57 #define SMC_64 1 58 #define SMC_32 0 59 #define SMC_UNK 0xffffffff 60 #define SMC_TYPE_FAST 1 61 #define SMC_TYPE_STD 0 62 #define SMC_PREEMPTED 0xfffffffe 63 /******************************************************************************* 64 * Owning entity number definitions inside the function id as per the SMC 65 * calling convention 66 ******************************************************************************/ 67 #define OEN_ARM_START 0 68 #define OEN_ARM_END 0 69 #define OEN_CPU_START 1 70 #define OEN_CPU_END 1 71 #define OEN_SIP_START 2 72 #define OEN_SIP_END 2 73 #define OEN_OEM_START 3 74 #define OEN_OEM_END 3 75 #define OEN_STD_START 4 /* Standard Calls */ 76 #define OEN_STD_END 4 77 #define OEN_TAP_START 48 /* Trusted Applications */ 78 #define OEN_TAP_END 49 79 #define OEN_TOS_START 50 /* Trusted OS */ 80 #define OEN_TOS_END 63 81 #define OEN_LIMIT 64 82 83 /******************************************************************************* 84 * Constants to indicate type of exception to the common exception handler. 85 ******************************************************************************/ 86 #define SYNC_EXCEPTION_SP_EL0 0x0 87 #define IRQ_SP_EL0 0x1 88 #define FIQ_SP_EL0 0x2 89 #define SERROR_SP_EL0 0x3 90 #define SYNC_EXCEPTION_SP_ELX 0x4 91 #define IRQ_SP_ELX 0x5 92 #define FIQ_SP_ELX 0x6 93 #define SERROR_SP_ELX 0x7 94 #define SYNC_EXCEPTION_AARCH64 0x8 95 #define IRQ_AARCH64 0x9 96 #define FIQ_AARCH64 0xa 97 #define SERROR_AARCH64 0xb 98 #define SYNC_EXCEPTION_AARCH32 0xc 99 #define IRQ_AARCH32 0xd 100 #define FIQ_AARCH32 0xe 101 #define SERROR_AARCH32 0xf 102 103 /******************************************************************************* 104 * Structure definition, typedefs & constants for the runtime service framework 105 ******************************************************************************/ 106 107 /* 108 * Constants to allow the assembler access a runtime service 109 * descriptor 110 */ 111 #define RT_SVC_SIZE_LOG2 5 112 #define SIZEOF_RT_SVC_DESC (1 << RT_SVC_SIZE_LOG2) 113 #define RT_SVC_DESC_INIT 16 114 #define RT_SVC_DESC_HANDLE 24 115 116 /* 117 * The function identifier has 6 bits for the owning entity number and 118 * single bit for the type of smc call. When taken together these 119 * values limit the maximum number of runtime services to 128. 120 */ 121 #define MAX_RT_SVCS 128 122 123 #ifndef __ASSEMBLY__ 124 125 #include <cassert.h> 126 #include <context.h> 127 #include <stdint.h> 128 129 /* Various flags passed to SMC handlers */ 130 #define SMC_FROM_SECURE (0 << 0) 131 #define SMC_FROM_NON_SECURE (1 << 0) 132 133 #define is_caller_non_secure(_f) (!!(_f & SMC_FROM_NON_SECURE)) 134 #define is_caller_secure(_f) (!(is_caller_non_secure(_f))) 135 136 /* Prototype for runtime service initializing function */ 137 typedef int32_t (*rt_svc_init_t)(void); 138 139 /* Convenience macros to return from SMC handler */ 140 #define SMC_RET0(_h) { \ 141 return (uint64_t) (_h); \ 142 } 143 #define SMC_RET1(_h, _x0) { \ 144 write_ctx_reg(get_gpregs_ctx(_h), CTX_GPREG_X0, (_x0)); \ 145 SMC_RET0(_h); \ 146 } 147 #define SMC_RET2(_h, _x0, _x1) { \ 148 write_ctx_reg(get_gpregs_ctx(_h), CTX_GPREG_X1, (_x1)); \ 149 SMC_RET1(_h, (_x0)); \ 150 } 151 #define SMC_RET3(_h, _x0, _x1, _x2) { \ 152 write_ctx_reg(get_gpregs_ctx(_h), CTX_GPREG_X2, (_x2)); \ 153 SMC_RET2(_h, (_x0), (_x1)); \ 154 } 155 #define SMC_RET4(_h, _x0, _x1, _x2, _x3) { \ 156 write_ctx_reg(get_gpregs_ctx(_h), CTX_GPREG_X3, (_x3)); \ 157 SMC_RET3(_h, (_x0), (_x1), (_x2)); \ 158 } 159 160 161 /* 162 * Convenience macros to access general purpose registers using handle provided 163 * to SMC handler. These takes the offset values defined in context.h 164 */ 165 #define SMC_GET_GP(_h, _g) \ 166 read_ctx_reg(get_gpregs_ctx(_h), (_g)); 167 #define SMC_SET_GP(_h, _g, _v) \ 168 write_ctx_reg(get_gpregs_ctx(_h), (_g), (_v)); 169 170 /* 171 * Convenience macros to access EL3 context registers using handle provided to 172 * SMC handler. These takes the offset values defined in context.h 173 */ 174 #define SMC_GET_EL3(_h, _e) \ 175 read_ctx_reg(get_el3state_ctx(_h), (_e)); 176 #define SMC_SET_EL3(_h, _e, _v) \ 177 write_ctx_reg(get_el3state_ctx(_h), (_e), (_v)); 178 179 /* The macro below is used to identify a Standard Service SMC call */ 180 #define is_std_svc_call(_fid) ((((_fid) >> FUNCID_OEN_SHIFT) & \ 181 FUNCID_OEN_MASK) == OEN_STD_START) 182 183 /* The macro below is used to identify a valid Fast SMC call */ 184 #define is_valid_fast_smc(_fid) ((!(((_fid) >> 16) & 0xff)) && \ 185 (GET_SMC_TYPE(_fid) == SMC_TYPE_FAST)) 186 187 /* 188 * Prototype for runtime service SMC handler function. x0 (SMC Function ID) to 189 * x4 are as passed by the caller. Rest of the arguments to SMC and the context 190 * can be accessed using the handle pointer. The cookie parameter is reserved 191 * for future use 192 */ 193 typedef uint64_t (*rt_svc_handle_t)(uint32_t smc_fid, 194 uint64_t x1, 195 uint64_t x2, 196 uint64_t x3, 197 uint64_t x4, 198 void *cookie, 199 void *handle, 200 uint64_t flags); 201 typedef struct rt_svc_desc { 202 uint8_t start_oen; 203 uint8_t end_oen; 204 uint8_t call_type; 205 const char *name; 206 rt_svc_init_t init; 207 rt_svc_handle_t handle; 208 } rt_svc_desc_t; 209 210 /* 211 * Convenience macro to declare a service descriptor 212 */ 213 #define DECLARE_RT_SVC(_name, _start, _end, _type, _setup, _smch) \ 214 static const rt_svc_desc_t __svc_desc_ ## _name \ 215 __attribute__ ((section("rt_svc_descs"), used)) = { \ 216 _start, \ 217 _end, \ 218 _type, \ 219 #_name, \ 220 _setup, \ 221 _smch } 222 223 /* 224 * Compile time assertions related to the 'rt_svc_desc' structure to: 225 * 1. ensure that the assembler and the compiler view of the size 226 * of the structure are the same. 227 * 2. ensure that the assembler and the compiler see the initialisation 228 * routine at the same offset. 229 * 3. ensure that the assembler and the compiler see the handler 230 * routine at the same offset. 231 */ 232 CASSERT((sizeof(rt_svc_desc_t) == SIZEOF_RT_SVC_DESC), \ 233 assert_sizeof_rt_svc_desc_mismatch); 234 CASSERT(RT_SVC_DESC_INIT == __builtin_offsetof(rt_svc_desc_t, init), \ 235 assert_rt_svc_desc_init_offset_mismatch); 236 CASSERT(RT_SVC_DESC_HANDLE == __builtin_offsetof(rt_svc_desc_t, handle), \ 237 assert_rt_svc_desc_handle_offset_mismatch); 238 239 240 /* 241 * This macro combines the call type and the owning entity number corresponding 242 * to a runtime service to generate a unique owning entity number. This unique 243 * oen is used to access an entry in the 'rt_svc_descs_indices' array. The entry 244 * contains the index of the service descriptor in the 'rt_svc_descs' array. 245 */ 246 #define get_unique_oen(oen, call_type) ((oen & FUNCID_OEN_MASK) | \ 247 ((call_type & FUNCID_TYPE_MASK) \ 248 << FUNCID_OEN_WIDTH)) 249 250 251 /* 252 * Macro to define UUID for services. Apart from defining and initializing a 253 * uuid_t structure, this macro verifies that the first word of the defined UUID 254 * does not equal SMC_UNK. This is to ensure that the caller won't mistake the 255 * returned UUID in x0 for an invalid SMC error return 256 */ 257 #define DEFINE_SVC_UUID(_name, _tl, _tm, _th, _cl, _ch, \ 258 _n0, _n1, _n2, _n3, _n4, _n5) \ 259 CASSERT(_tl != SMC_UNK, invalid_svc_uuid);\ 260 static const uuid_t _name = { \ 261 _tl, _tm, _th, _cl, _ch, \ 262 { _n0, _n1, _n2, _n3, _n4, _n5 } \ 263 } 264 265 /* Return a UUID in the SMC return registers */ 266 #define SMC_UUID_RET(_h, _uuid) \ 267 SMC_RET4(handle, ((const uint32_t *) &(_uuid))[0], \ 268 ((const uint32_t *) &(_uuid))[1], \ 269 ((const uint32_t *) &(_uuid))[2], \ 270 ((const uint32_t *) &(_uuid))[3]) 271 272 /******************************************************************************* 273 * Function & variable prototypes 274 ******************************************************************************/ 275 void runtime_svc_init(void); 276 extern uint64_t __RT_SVC_DESCS_START__; 277 extern uint64_t __RT_SVC_DESCS_END__; 278 void init_crash_reporting(void); 279 280 #endif /*__ASSEMBLY__*/ 281 #endif /* __RUNTIME_SVC_H__ */ 282
