1 /* 2 * Copyright (C) 2013 - 2016 Sony Corporation 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef _LDACBT_H_ 18 #define _LDACBT_H_ 19 #ifdef __cplusplus 20 extern "C" { 21 #endif 22 #ifndef LDACBT_API 23 #define LDACBT_API 24 #endif /* LDACBT_API */ 25 26 /* This file contains the definitions, declarations and macros for an implimentation of 27 * LDAC encode processing. 28 * 29 * The basic flow of the encode processing is as follows: 30 * - The program creates an handle of an LDAC api using ldacBT_get_handle(). 31 * - The program initialize the handle for encode using ldacBT_init_handle_encode(). 32 * - The program calls ldacBT_encode() to encode data. 33 * - If the program demands to control the Encode Quality Mode Index, then one of the following 34 * should be called: 35 * - ldacBT_set_eqmid() 36 * - ldacBT_alter_eqmid() 37 * - The program finishes the encoding with passing NULL to input pcm buffer for ldacBT_encode(), 38 * which enables the encoder to encode remaining data in its input buffers. 39 * - The handle may be closed using ldacBT_close_handle() then used again, or released with 40 * ldacBT_free_handle(). 41 * - The rest of the set functions should be called only if it is needed by the client. 42 * 43 * 44 * Note for an implimentation 45 * - Error processing 46 * When continuous processing for next frame is performed after error detection, following 47 * processing must be carried out using C function provided in the library. 48 * - Release of internal variables in encode processing using ldacBT_close_handle(). 49 * - Allocation and initialization of internal variables in encode processing using 50 * ldacBT_init_handle_encode(). 51 * Note that the encoded output for a few frames will not be present just after error recovery. 52 * 53 * - Resuming of the encode processing from an interruption 54 * In case of resuming of the encode processing from interruption (such as changing 55 * configuration, seeking and playback), initialization of internal variables in encode 56 * processing must be carried out as error processing described above. 57 * Note that the encoded output for a few frames will not be present just after initialization 58 * as above. 59 * 60 * 61 * Glossary 62 * channel_config_index (cci) 63 * The channel setting information for ldaclib. 64 * See ldacBT_cm_to_cci() to get value from channel_mode. 65 * 66 * channel_mode (cm) 67 * The channel setting information for LDAC specification of Bluetooth A2DP. 68 * See ldacBT_cci_to_cm() to get value from channel_config_index. 69 * 70 * ldac_transport_frame 71 * See LDAC specification of bluetooth A2DP. 72 * 73 * Maximum Transmission Unit (MTU) 74 * The minimum MTU that a L2CAP implementation for LDAC shall support is 679 bytes, because LDAC 75 * is optimized with 2-DH5 packet as its target. 76 * 77 * frame 78 * An audio signal sequence representing a certain number of PCM audio signals. 79 * Encoding and decoding are processed frame by frame in LDAC. Number of samples in a frame is 80 * determined by sampling frequency as described below. 81 * 82 * Sampling frequency and frame sample. 83 * Supported sampling frequencies are 44.1, 48, 88.2 and 96 kHz. 84 * The relationship between sampling frequency and frame sample in LDAC are shown below. 85 * -------------------------------------------------------- 86 * | sampling frequency [kHz] | 44.1 | 48 | 88.2 | 96 | 87 * | frame sample [samples/channel] | 128 | 256 | 88 * -------------------------------------------------------- 89 * Though the frame size varies in LDAC core as described in the table, the number of samples in 90 * input PCM signal for encoding is fixed to 128 sample/channel, and it is not affected by 91 * sampling frequency. 92 */ 93 #define LDACBT_ENC_LSU 128 94 #define LDACBT_MAX_LSU 512 95 96 /* channel_config_index. 97 * Supported value are below. 98 */ 99 #define LDAC_CCI_MONO 0 /* MONO */ 100 #define LDAC_CCI_DUAL_CHANNEL 1 /* DUAL CHANNEL */ 101 #define LDAC_CCI_STEREO 2 /* STEREO */ 102 103 /* PCM format. 104 * Supported PCM format are shown below. 105 * - LDACBT_SMPL_FMT_S16 : signed 16bits little endian. 106 * - LDACBT_SMPL_FMT_S24 : signed 24bits little endian. 107 * - LDACBT_SMPL_FMT_S32 : signed 32bits little endian. 108 * - LDACBT_SMPL_FMT_F32 : single-precision floating point. 109 * The data sequency must be interleaved format by 1 sample. 110 * Ex) 2 channel audio, the data sequences are aligned as below. 111 * seq : |L[0]|R[0]|L[1]|R[1]|... 112 */ 113 typedef enum { 114 LDACBT_SMPL_FMT_S16 = 0x2, 115 LDACBT_SMPL_FMT_S24 = 0x3, 116 LDACBT_SMPL_FMT_S32 = 0x4, 117 LDACBT_SMPL_FMT_F32 = 0x5, 118 } LDACBT_SMPL_FMT_T; 119 120 /* Encode Quality Mode Index. (EQMID) 121 * The configuration of encoding in LDAC will be coordinated by "Encode Quality Mode Index" 122 * parameter. Configurable values are shown below. 123 * - LDACBT_EQMID_HQ : Encode setting for High Quality. 124 * - LDACBT_EQMID_SQ : Encode setting for Standard Quality. 125 * - LDACBT_EQMID_MQ : Encode setting for Mobile use Quality. 126 */ 127 enum { 128 LDACBT_EQMID_HQ = 0, 129 LDACBT_EQMID_SQ, 130 LDACBT_EQMID_MQ, 131 LDACBT_EQMID_NUM, /* terminater */ 132 }; 133 134 /* Bit rates 135 * Bit rates in each EQMID are depend on sampling frequency. 136 * In this API specification, these relations are shown below. 137 * ___________________________________________ 138 * | | Sampling Frequency[kHz] | 139 * | EQMID | 44.1, 88.2 | 48, 96 | 140 * +-----------------+------------+------------+ 141 * | LDACBT_EQMID_HQ | 909kbps | 990kbps | 142 * | LDACBT_EQMID_SQ | 606kbps | 660kbps | 143 * | LDACBT_EQMID_MQ | 303kbps | 330kbps | 144 * ------------------------------------------- 145 */ 146 147 /* Maximum size of the "ldac_transport_frame" sequence at transportation. */ 148 #define LDACBT_MAX_NBYTES 1024 /* byte */ 149 150 /* Maximum number of channel for LDAC */ 151 #define LDAC_PRCNCH 2 152 153 /* LDAC handle type */ 154 typedef struct _st_ldacbt_handle * HANDLE_LDAC_BT; 155 156 /* Allocation of LDAC handle. 157 * Format 158 * HANDLE_LDAC_BT ldacBT_get_handle( void ); 159 * Arguments 160 * None. 161 * Return value 162 * HANDLE_LDAC_BT for success, NULL for failure. 163 */ 164 LDACBT_API HANDLE_LDAC_BT ldacBT_get_handle( void ); 165 166 /* Release of LDAC handle. 167 * Format 168 * void ldacBT_free_handle( HANDLE_LDAC_BT hLdacBt ); 169 * Arguments 170 * hLdacBt HANDLE_LDAC_BT LDAC handle. 171 * Return value 172 * None. 173 */ 174 LDACBT_API void ldacBT_free_handle( HANDLE_LDAC_BT hLdacBt ); 175 176 /* Closing of initialized LDAC handle. 177 * Closed handle can be initialized and used again. 178 * Format 179 * void ldacBT_close_handle( HANDLE_LDAC_BT hLdacBt ); 180 * Arguments 181 * hLdacBt HANDLE_LDAC_BT LDAC handle. 182 * Return value 183 * None. 184 */ 185 LDACBT_API void ldacBT_close_handle( HANDLE_LDAC_BT hLdacBt ); 186 187 /* Acquisition of the library version. 188 * Format 189 * int ldacBT_get_version( void ); 190 * Arguments 191 * None. 192 * Return value 193 * int : version number. 194 * 23-16 bit : major version 195 * 15- 8 bit : minor version 196 * 7- 0 bit : branch version 197 * Ex) 0x00010203 -> version 1.02.03 198 */ 199 LDACBT_API int ldacBT_get_version( void ); 200 201 /* Acquisition of the sampling frequency in current configuration. 202 * The LDAC handle must be initialized by API function ldacBT_init_handle_encode() prior to 203 * calling this function. 204 * Format 205 * int ldacBT_get_sampling_freq( HANDLE_LDAC_BT hLdacBt ); 206 * Arguments 207 * hLdacBt HANDLE_LDAC_BT LDAC handle. 208 * Return value 209 * int : sampling frequency in current configuration. -1 for failure. 210 */ 211 LDACBT_API int ldacBT_get_sampling_freq( HANDLE_LDAC_BT hLdacBt ); 212 213 /* Acquisition of the Bit-rate. 214 * The LDAC handle must be initialized by API function ldacBT_init_handle_encode() prior to 215 * calling this function. 216 * Format 217 * int ldacBT_get_bitrate( HANDLE_LDAC_BT hLdacBt ); 218 * Arguments 219 * hLdacBt HANDLE_LDAC_BT LDAC handle. 220 * Return value 221 * int : Bit-rate for previously processed ldac_transport_frame for success. -1 for failure. 222 */ 223 LDACBT_API int ldacBT_get_bitrate( HANDLE_LDAC_BT hLdacBt ); 224 225 /* Initialization of a LDAC handle for encode processing. 226 * The LDAC handle must be allocated by API function ldacBT_get_handle() prior to calling this API. 227 * "mtu" value should be configured to MTU size of AVDTP Transport Channel, which is determined by 228 * SRC and SNK devices in Bluetooth transmission. 229 * "eqmid" is configured to desired value of "Encode Quality Mode Index". 230 * "cm" is configured to channel_mode in LDAC, which is determined by SRC and SNK devices in 231 * Bluetooth transmission. 232 * "fmt" is configured to input pcm audio format. 233 * When the configuration of "mtu", "cm", or "sf" changed, the re-initialization is required. 234 * 235 * Format 236 * int ldacBT_init_handle_encode( HANDLE_LDAC_BT hLdacBt, int mtu, int eqmid, int cm, 237 * LDACBT_SMPL_FMT_T fmt, int sf ); 238 * Arguments 239 * hLdacBt HANDLE_LDAC_BT LDAC handle. 240 * mtu int MTU value. Unit:Byte. 241 * eqmid int Encode Quality Mode Index. 242 * cm int Information of the channel_mode. 243 * fmt LDACBT_SMPL_FMT_T Audio format type of input pcm. 244 * sf int Sampling frequency of input pcm. 245 * Return value 246 * int : 0 for success, -1 for failure. 247 */ 248 LDACBT_API int ldacBT_init_handle_encode( HANDLE_LDAC_BT hLdacBt, int mtu, int eqmid, int cm, 249 LDACBT_SMPL_FMT_T fmt, int sf ); 250 251 /* Configuration of Encode Quality Mode Index. 252 * The LDAC handle must be initialized by API function ldacBT_init_handle_encode() prior to 253 * calling this function. 254 * The API function can be called at any time, after the completion of initializing. 255 * Format 256 * int ldacBT_set_eqmid( HANDLE_LDAC_BT hLdacBt, int eqmid ); 257 * Arguments 258 * hLdacBt HANDLE_LDAC_BT LDAC handle. 259 * eqmid int Encode Quality Mode Index. 260 * Return value 261 * int : 0 for success, -1 for failure. 262 */ 263 LDACBT_API int ldacBT_set_eqmid( HANDLE_LDAC_BT hLdacBt, int eqmid ); 264 265 /* Acquisition of prescribed Encode Quality Mode Index in current configuration. 266 * The LDAC handle must be initialized by API function ldacBT_init_handle_encode() prior to 267 * calling this function. 268 * Format 269 * int ldacBT_get_eqmid( HANDLE_LDAC_BT hLdacBt ); 270 * Arguments 271 * hLdacBt HANDLE_LDAC_BT LDAC handle. 272 * Return value 273 * int : Encode Quality Mode Index for success, -1 for failure. 274 */ 275 LDACBT_API int ldacBT_get_eqmid( HANDLE_LDAC_BT hLdacBt ); 276 277 /* Changing of configuration for Encode Quality Mode Index by one step. 278 * The LDAC handle must be initialized by API function ldacBT_init_handle_encode() prior to 279 * calling this function. 280 * Configuralbe values for "priority" are shown below. 281 * - LDACBT_EQMID_INC_QUALITY : Adjustment for EQMID by one step for the direction of 282 * getting close to LDACBT_EQMID_HQ. 283 * - LDACBT_EQMID_INC_CONNECTION : Adjustment for EQMID by one step for the direction of 284 * getting away from LDACBT_EQMID_HQ. 285 * For restoring prescribed value for "Encode Quality Mode Index", it must be configured again by 286 * API function ldacBT_init_handle_encode() or ldacBT_set_qmode(). 287 * A transition to the state other than "Encode Quality Mode Index" mention before may be occurred 288 * caused by an adjustment using this API function. 289 * The API function can be called at any time, after the completion of initializing. 290 * Format 291 * int ldacBT_alter_eqmid_priority( HANDLE_LDAC_BT hLdacBt, int priority ); 292 * Arguments 293 * hLdacBt HANDLE_LDAC_BT LDAC handle. 294 * priority int The direction of changing EQMID. 295 * Return value 296 * int : 0 for success, -1 for failure. 297 */ 298 #define LDACBT_EQMID_INC_QUALITY 1 299 #define LDACBT_EQMID_INC_CONNECTION -1 300 LDACBT_API int ldacBT_alter_eqmid_priority( HANDLE_LDAC_BT hLdacBt, int priority ); 301 302 303 /* LDAC encode processing. 304 * The LDAC handle must be initialized by API function ldacBT_init_handle_encode() prior to calling 305 * this API function. 306 * <Regarding on a input PCM signal> 307 * Number of samples in input PCM signal for encoding is fixed to 128 samples per channel, and it 308 * is not affected by sampling frequency. 309 * 310 * The region in input signal buffer without any PCM signal must be filled with zero, if the 311 * number of samples is less than 128 samples. 312 * 313 * The format of PCM signal is determined by "fmt" configured by API function 314 * ldacBT_init_handle_encode(). 315 * 316 * Total size of referenced PCM signal (in byte) will be set in "pcm_used" on return. The value of 317 * "Number of input samples * Number of channels * sizeof(PCM word length)" will be set in normal. 318 * 319 * Finalize processing of encode will be carried out with setting "p_pcm" as zero. 320 * 321 * <Regarding on output encoded data> 322 * An output data in "ldac_transport_frame" sequence will be set to "p_stream" after several frame 323 * processing. So the output is not necessarily present at each calling of this API function. 324 * 325 * The presence of the output can be verified by checking whether the value of "stream_wrote", 326 * representing the number of written bytes for "p_stream", is positive or not. 327 * 328 * In addition, encoded data size for output will be determined by the value of "mtu" configured 329 * by API function ldacBT_init_handle_encode(). 330 * 331 * The number of "ldac_transport_frame" corresponding to "ldac_transport_frame" sequence as output 332 * will be set to "frame_num". 333 * 334 * Format 335 * int ldacBT_encode( HANDLE_LDAC_BT hLdacBt, void *p_pcm, int *pcm_used, 336 * unsigned char *p_stream, int *stream_sz, int *frame_num ); 337 * Arguments 338 * hLdacBt HANDLE_LDAC_BT LDAC handle. 339 * p_pcm void * Input PCM signal sequence 340 * pcm_used int * Data size of referenced PCM singnal. Unit:Byte. 341 * p_stream unsigned char * Output "ldac_transport_frame" sequence. 342 * stream_sz int * Size of output data. Unit:Byte. 343 * frame_num int * Number of output "ldac_transport_frame" 344 * Return value 345 * int : 0 for success, -1 for failure. 346 */ 347 LDACBT_API int ldacBT_encode( HANDLE_LDAC_BT hLdacBt, void *p_pcm, int *pcm_used, 348 unsigned char *p_stream, int *stream_sz, int *frame_num ); 349 350 /* Acquisition of previously established error code. 351 * The LDAC handle must be allocated by API function ldacBT_get_handle() prior to calling this function. 352 * The details of error code are described below at the end of this header file. 353 * Tips for error code handling. 354 * The macro function LDACBT_FATAL() is useful to determine whether the error code is Fatal or not. 355 * Ex.) if( LDACBT_FATAL(err) ) // Fatal Error occurred. 356 * 357 * The macro function LDACBT_ERROR() is useful to determine whether the error occurred or not. 358 * Ex.) if( LDACBT_ERROR(err) ) // Error occurred. 359 * 360 * The macro function LDACBT_HANDLE_ERR() is useful to get the handle level error code. 361 * Ex.) err_handle_lv = LDACBT_HANDLE_ERR(err); 362 * 363 * The macro function LDACBT_BLOCK_ERR() is useful to get the block level error code. 364 * Ex.) err_block_lv = LDACBT_BLOCK_ERR(err); 365 * 366 * Format 367 * int ldacBT_get_error_code( HANDLE_LDAC_BT hLdacBt ); 368 * Arguments 369 * hLdacBt HANDLE_LDAC_BT LDAC handle. 370 * Return value 371 * int : Error code. 372 */ 373 LDACBT_API int ldacBT_get_error_code( HANDLE_LDAC_BT hLdacBt ); 374 375 /******************************************************************************* 376 Error Code 377 *******************************************************************************/ 378 #define LDACBT_ERR_NONE 0 379 380 /* Non Fatal Error ***********************************************************/ 381 #define LDACBT_ERR_NON_FATAL 1 382 383 /* Non Fatal Error (Block Level) *********************************************/ 384 #define LDACBT_ERR_BIT_ALLOCATION 5 385 386 /* Non Fatal Error (Handle Level) ********************************************/ 387 #define LDACBT_ERR_NOT_IMPLEMENTED 128 388 #define LDACBT_ERR_NON_FATAL_ENCODE 132 389 390 /* Fatal Error ***************************************************************/ 391 #define LDACBT_ERR_FATAL 256 392 393 /* Fatal Error (Block Level) *************************************************/ 394 #define LDACBT_ERR_SYNTAX_BAND 260 395 #define LDACBT_ERR_SYNTAX_GRAD_A 261 396 #define LDACBT_ERR_SYNTAX_GRAD_B 262 397 #define LDACBT_ERR_SYNTAX_GRAD_C 263 398 #define LDACBT_ERR_SYNTAX_GRAD_D 264 399 #define LDACBT_ERR_SYNTAX_GRAD_E 265 400 #define LDACBT_ERR_SYNTAX_IDSF 266 401 #define LDACBT_ERR_SYNTAX_SPEC 267 402 403 #define LDACBT_ERR_BIT_PACKING 280 404 405 #define LDACBT_ERR_ALLOC_MEMORY 300 406 407 /* Fatal Error (Handle Level) ************************************************/ 408 #define LDACBT_ERR_FATAL_HANDLE 512 409 410 #define LDACBT_ERR_ILL_SYNCWORD 516 411 #define LDACBT_ERR_ILL_SMPL_FORMAT 517 412 #define LDACBT_ERR_ILL_PARAM 518 413 414 #define LDACBT_ERR_ASSERT_SAMPLING_FREQ 530 415 #define LDACBT_ERR_ASSERT_SUP_SAMPLING_FREQ 531 416 #define LDACBT_ERR_CHECK_SAMPLING_FREQ 532 417 #define LDACBT_ERR_ASSERT_CHANNEL_CONFIG 533 418 #define LDACBT_ERR_CHECK_CHANNEL_CONFIG 534 419 #define LDACBT_ERR_ASSERT_FRAME_LENGTH 535 420 #define LDACBT_ERR_ASSERT_SUP_FRAME_LENGTH 536 421 #define LDACBT_ERR_ASSERT_FRAME_STATUS 537 422 #define LDACBT_ERR_ASSERT_NSHIFT 538 423 #define LDACBT_ERR_ASSERT_CHANNEL_MODE 539 424 425 #define LDACBT_ERR_ENC_INIT_ALLOC 550 426 #define LDACBT_ERR_ENC_ILL_GRADMODE 551 427 #define LDACBT_ERR_ENC_ILL_GRADPAR_A 552 428 #define LDACBT_ERR_ENC_ILL_GRADPAR_B 553 429 #define LDACBT_ERR_ENC_ILL_GRADPAR_C 554 430 #define LDACBT_ERR_ENC_ILL_GRADPAR_D 555 431 #define LDACBT_ERR_ENC_ILL_NBANDS 556 432 #define LDACBT_ERR_PACK_BLOCK_FAILED 557 433 434 #define LDACBT_ERR_DEC_INIT_ALLOC 570 435 #define LDACBT_ERR_INPUT_BUFFER_SIZE 571 436 #define LDACBT_ERR_UNPACK_BLOCK_FAILED 572 437 #define LDACBT_ERR_UNPACK_BLOCK_ALIGN 573 438 #define LDACBT_ERR_UNPACK_FRAME_ALIGN 574 439 #define LDACBT_ERR_FRAME_LENGTH_OVER 575 440 #define LDACBT_ERR_FRAME_ALIGN_OVER 576 441 442 443 /* LDAC API for Encode */ 444 #define LDACBT_ERR_ALTER_EQMID_LIMITED 21 445 #define LDACBT_ERR_HANDLE_NOT_INIT 1000 446 #define LDACBT_ERR_ILL_EQMID 1024 447 #define LDACBT_ERR_ILL_SAMPLING_FREQ 1025 448 #define LDACBT_ERR_ILL_NUM_CHANNEL 1026 449 #define LDACBT_ERR_ILL_MTU_SIZE 1027 450 /* LDAC API for Decode */ 451 #define LDACBT_ERR_DEC_CONFIG_UPDATED 40 452 453 454 /* Macro Functions for Error Code ********************************************/ 455 #define LDACBT_API_ERR(err) ((err >> 20) & 0x0FFF) 456 #define LDACBT_HANDLE_ERR(err) ((err >> 10) & 0x03FF) 457 #define LDACBT_BLOCK_ERR(err) ( err & 0x03FF) 458 #define LDACBT_ERROR(err) ((LDACBT_ERR_NON_FATAL) <= LDACBT_API_ERR(err) ? 1 : 0) 459 #define LDACBT_FATAL(err) ((LDACBT_ERR_FATAL) <= LDACBT_API_ERR(err) ? 1 : 0) 460 461 462 463 /* Codec Specific Information Elements for LDAC 464 * (based on "LDAC Specification of Bluetooth A2DP Rev.2.0.1") 465 * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 466 * service_caps[4] | SONY ID | Octet0 467 * service_caps[5] | SONY ID | Octet1 468 * service_caps[6] | SONY ID | Octet2 469 * service_caps[7] | SONY ID | Octet3 470 * service_caps[8] | SONY Specific Codec ID | Octet4 471 * service_caps[9] | SONY Specific Codec ID | Octet5 472 * service_caps[A] | RFA | Sampling Frequency | Octet6 473 * service_caps[B] | RFA | Channel Mode ID | Octet7 474 */ 475 #define LDACBT_MEDIA_CODEC_SC_SZ (10+2) 476 477 /* [Octet 0-3] Vendor ID for SONY */ 478 #define LDACBT_VENDOR_ID0 0x2D 479 #define LDACBT_VENDOR_ID1 0x01 480 #define LDACBT_VENDOR_ID2 0x0 481 #define LDACBT_VENDOR_ID3 0x0 482 483 /* [Octet 4-5] Vendor Specific A2DP Codec ID for LDAC */ 484 #define LDACBT_CODEC_ID0 0xAA 485 #define LDACBT_CODEC_ID1 0x00 486 487 /* [Octet 6] 488 * [b7,b6] : RFA 489 * Reserved for future additions. 490 * Bits with this designation shall be set to zero. 491 * Receivers shall ignore these bits. 492 * ----------------------------------------------------- 493 * [b5-b0] : Sampling frequency and its associated bit field in LDAC are shown below. 494 * | 5 | 4 | 3 | 2 | 1 | 0 | 495 * | o | | | | | | 44100 496 * | | o | | | | | 48000 497 * | | | o | | | | 88200 498 * | | | | o | | | 96000 499 * | | | | | o | | 176400 500 * | | | | | | o | 192000 501 * 502 */ 503 /* Support for 44.1kHz sampling frequency */ 504 #define LDACBT_SAMPLING_FREQ_044100 0x20 505 /* Support for 48kHz sampling frequency */ 506 #define LDACBT_SAMPLING_FREQ_048000 0x10 507 /* Support for 88.2kHz sampling frequency */ 508 #define LDACBT_SAMPLING_FREQ_088200 0x08 509 /* Support for 96kHz sampling frequency */ 510 #define LDACBT_SAMPLING_FREQ_096000 0x04 511 /* Support for 176.4kHz sampling frequency */ 512 #define LDACBT_SAMPLING_FREQ_176400 0x02 513 /* Support for 192kHz sampling frequency */ 514 #define LDACBT_SAMPLING_FREQ_192000 0x01 515 516 /* [Octet 7] 517 * [b7-b3] : RFA 518 * Reserved for future additions. 519 * Bits with this designation shall be set to zero. 520 * Receivers shall ignore these bits. 521 * ------------------------------------------------------ 522 * [b2-b0] : Channel mode and its associated bit field in LDAC are shown below. 523 * | 2 | 1 | 0 | 524 * | o | | | MONO 525 * | | o | | DUAL CHANNEL 526 * | | | o | STEREO 527 */ 528 /* Support for MONO */ 529 #define LDACBT_CHANNEL_MODE_MONO 0x04 530 /* Support for DUAL CHANNEL */ 531 #define LDACBT_CHANNEL_MODE_DUAL_CHANNEL 0x02 532 /* Support for STEREO */ 533 #define LDACBT_CHANNEL_MODE_STEREO 0x01 534 535 #ifdef __cplusplus 536 } 537 #endif 538 #endif /* _LDACBT_H_ */ 539
