1 /* 2 * Copyright (c) 2006 Paolo Abeni (Italy) 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote 15 * products derived from this software without specific prior written 16 * permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 20 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 21 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 22 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 23 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 24 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 28 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 * 30 * Basic USB data struct 31 * By Paolo Abeni <paolo.abeni (at) email.it> 32 */ 33 34 #ifndef _PCAP_USB_STRUCTS_H__ 35 #define _PCAP_USB_STRUCTS_H__ 36 37 /* 38 * possible transfer mode 39 */ 40 #define URB_TRANSFER_IN 0x80 41 #define URB_ISOCHRONOUS 0x0 42 #define URB_INTERRUPT 0x1 43 #define URB_CONTROL 0x2 44 #define URB_BULK 0x3 45 46 /* 47 * possible event type 48 */ 49 #define URB_SUBMIT 'S' 50 #define URB_COMPLETE 'C' 51 #define URB_ERROR 'E' 52 53 /* 54 * USB setup header as defined in USB specification. 55 * Appears at the front of each Control S-type packet in DLT_USB captures. 56 */ 57 typedef struct _usb_setup { 58 u_int8_t bmRequestType; 59 u_int8_t bRequest; 60 u_int16_t wValue; 61 u_int16_t wIndex; 62 u_int16_t wLength; 63 } pcap_usb_setup; 64 65 /* 66 * Information from the URB for Isochronous transfers. 67 */ 68 typedef struct _iso_rec { 69 int32_t error_count; 70 int32_t numdesc; 71 } iso_rec; 72 73 /* 74 * Header prepended by linux kernel to each event. 75 * Appears at the front of each packet in DLT_USB_LINUX captures. 76 */ 77 typedef struct _usb_header { 78 u_int64_t id; 79 u_int8_t event_type; 80 u_int8_t transfer_type; 81 u_int8_t endpoint_number; 82 u_int8_t device_address; 83 u_int16_t bus_id; 84 char setup_flag;/*if !=0 the urb setup header is not present*/ 85 char data_flag; /*if !=0 no urb data is present*/ 86 int64_t ts_sec; 87 int32_t ts_usec; 88 int32_t status; 89 u_int32_t urb_len; 90 u_int32_t data_len; /* amount of urb data really present in this event*/ 91 pcap_usb_setup setup; 92 } pcap_usb_header; 93 94 /* 95 * Header prepended by linux kernel to each event for the 2.6.31 96 * and later kernels; for the 2.6.21 through 2.6.30 kernels, the 97 * "iso_rec" information, and the fields starting with "interval" 98 * are zeroed-out padding fields. 99 * 100 * Appears at the front of each packet in DLT_USB_LINUX_MMAPPED captures. 101 */ 102 typedef struct _usb_header_mmapped { 103 u_int64_t id; 104 u_int8_t event_type; 105 u_int8_t transfer_type; 106 u_int8_t endpoint_number; 107 u_int8_t device_address; 108 u_int16_t bus_id; 109 char setup_flag;/*if !=0 the urb setup header is not present*/ 110 char data_flag; /*if !=0 no urb data is present*/ 111 int64_t ts_sec; 112 int32_t ts_usec; 113 int32_t status; 114 u_int32_t urb_len; 115 u_int32_t data_len; /* amount of urb data really present in this event*/ 116 union { 117 pcap_usb_setup setup; 118 iso_rec iso; 119 } s; 120 int32_t interval; /* for Interrupt and Isochronous events */ 121 int32_t start_frame; /* for Isochronous events */ 122 u_int32_t xfer_flags; /* copy of URB's transfer flags */ 123 u_int32_t ndesc; /* number of isochronous descriptors */ 124 } pcap_usb_header_mmapped; 125 126 /* 127 * Isochronous descriptors; for isochronous transfers there might be 128 * one or more of these at the beginning of the packet data. The 129 * number of descriptors is given by the "ndesc" field in the header; 130 * as indicated, in older kernels that don't put the descriptors at 131 * the beginning of the packet, that field is zeroed out, so that field 132 * can be trusted even in captures from older kernels. 133 */ 134 typedef struct _usb_isodesc { 135 int32_t status; 136 u_int32_t offset; 137 u_int32_t len; 138 u_int8_t pad[4]; 139 } usb_isodesc; 140 141 #endif 142
