1 /****************************************************************************** 2 * 3 * Copyright (C) 2009-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /******************************************************************************* 20 * 21 * Filename: btif_dm.c 22 * 23 * Description: Contains Device Management (DM) related functionality 24 * 25 * 26 ******************************************************************************/ 27 28 #define LOG_TAG "bt_btif_dm" 29 30 #include "btif_dm.h" 31 32 #include <base/bind.h> 33 #include <base/logging.h> 34 #include <signal.h> 35 #include <stdio.h> 36 #include <stdlib.h> 37 #include <string.h> 38 #include <sys/types.h> 39 #include <time.h> 40 #include <unistd.h> 41 42 #include <mutex> 43 44 #include <hardware/bluetooth.h> 45 46 #include "advertise_data_parser.h" 47 #include "bdaddr.h" 48 #include "bt_common.h" 49 #include "bta_closure_api.h" 50 #include "bta_gatt_api.h" 51 #include "btif_api.h" 52 #include "btif_config.h" 53 #include "btif_dm.h" 54 #include "btif_hd.h" 55 #include "btif_hh.h" 56 #include "btif_sdp.h" 57 #include "btif_storage.h" 58 #include "btif_util.h" 59 #include "btu.h" 60 #include "device/include/controller.h" 61 #include "device/include/interop.h" 62 #include "include/stack_config.h" 63 #include "osi/include/allocator.h" 64 #include "osi/include/log.h" 65 #include "osi/include/metrics.h" 66 #include "osi/include/osi.h" 67 #include "osi/include/properties.h" 68 #include "stack/btm/btm_int.h" 69 #include "stack_config.h" 70 71 /****************************************************************************** 72 * Constants & Macros 73 *****************************************************************************/ 74 75 #define COD_MASK 0x07FF 76 77 #define COD_UNCLASSIFIED ((0x1F) << 8) 78 #define COD_HID_KEYBOARD 0x0540 79 #define COD_HID_POINTING 0x0580 80 #define COD_HID_COMBO 0x05C0 81 #define COD_HID_MAJOR 0x0500 82 #define COD_HID_MASK 0x0700 83 #define COD_AV_HEADSETS 0x0404 84 #define COD_AV_HANDSFREE 0x0408 85 #define COD_AV_HEADPHONES 0x0418 86 #define COD_AV_PORTABLE_AUDIO 0x041C 87 #define COD_AV_HIFI_AUDIO 0x0428 88 89 #define BTIF_DM_DEFAULT_INQ_MAX_RESULTS 0 90 #define BTIF_DM_DEFAULT_INQ_MAX_DURATION 10 91 #define BTIF_DM_MAX_SDP_ATTEMPTS_AFTER_PAIRING 2 92 93 #define NUM_TIMEOUT_RETRIES 5 94 95 #define PROPERTY_PRODUCT_MODEL "ro.product.model" 96 #define DEFAULT_LOCAL_NAME_MAX 31 97 #if (DEFAULT_LOCAL_NAME_MAX > BTM_MAX_LOC_BD_NAME_LEN) 98 #error "default btif local name size exceeds stack supported length" 99 #endif 100 101 #if (BTA_HOST_INTERLEAVE_SEARCH == TRUE) 102 #define BTIF_DM_INTERLEAVE_DURATION_BR_ONE 2 103 #define BTIF_DM_INTERLEAVE_DURATION_LE_ONE 2 104 #define BTIF_DM_INTERLEAVE_DURATION_BR_TWO 3 105 #define BTIF_DM_INTERLEAVE_DURATION_LE_TWO 4 106 #endif 107 108 #define ENCRYPTED_BREDR 2 109 #define ENCRYPTED_LE 4 110 111 typedef struct { 112 bt_bond_state_t state; 113 bt_bdaddr_t static_bdaddr; 114 BD_ADDR bd_addr; 115 tBTM_BOND_TYPE bond_type; 116 uint8_t pin_code_len; 117 uint8_t is_ssp; 118 uint8_t auth_req; 119 uint8_t io_cap; 120 uint8_t autopair_attempts; 121 uint8_t timeout_retries; 122 uint8_t is_local_initiated; 123 uint8_t sdp_attempts; 124 bool is_le_only; 125 bool is_le_nc; /* LE Numeric comparison */ 126 btif_dm_ble_cb_t ble; 127 } btif_dm_pairing_cb_t; 128 129 typedef struct { 130 uint8_t ir[BT_OCTET16_LEN]; 131 uint8_t irk[BT_OCTET16_LEN]; 132 uint8_t dhk[BT_OCTET16_LEN]; 133 } btif_dm_local_key_id_t; 134 135 typedef struct { 136 bool is_er_rcvd; 137 uint8_t er[BT_OCTET16_LEN]; 138 bool is_id_keys_rcvd; 139 btif_dm_local_key_id_t id_keys; /* ID kyes */ 140 141 } btif_dm_local_key_cb_t; 142 143 typedef struct { 144 BD_ADDR bd_addr; 145 BD_NAME bd_name; 146 } btif_dm_remote_name_t; 147 148 /* this structure holds optional OOB data for remote device */ 149 typedef struct { 150 BD_ADDR bdaddr; /* peer bdaddr */ 151 bt_out_of_band_data_t oob_data; 152 } btif_dm_oob_cb_t; 153 154 typedef struct { 155 bt_bdaddr_t bdaddr; 156 uint8_t transport; /* 0=Unknown, 1=BR/EDR, 2=LE */ 157 } btif_dm_create_bond_cb_t; 158 159 typedef struct { 160 uint8_t status; 161 uint8_t ctrl_state; 162 uint64_t tx_time; 163 uint64_t rx_time; 164 uint64_t idle_time; 165 uint64_t energy_used; 166 } btif_activity_energy_info_cb_t; 167 168 typedef struct { unsigned int manufact_id; } skip_sdp_entry_t; 169 170 typedef enum { 171 BTIF_DM_FUNC_CREATE_BOND, 172 BTIF_DM_FUNC_CANCEL_BOND, 173 BTIF_DM_FUNC_REMOVE_BOND, 174 BTIF_DM_FUNC_BOND_STATE_CHANGED, 175 } bt_bond_function_t; 176 177 typedef struct { 178 bt_bdaddr_t bd_addr; 179 bt_bond_function_t function; 180 bt_bond_state_t state; 181 struct timespec timestamp; 182 } btif_bond_event_t; 183 184 #define BTA_SERVICE_ID_TO_SERVICE_MASK(id) (1 << (id)) 185 186 #define UUID_HUMAN_INTERFACE_DEVICE "00001124-0000-1000-8000-00805f9b34fb" 187 188 #define MAX_BTIF_BOND_EVENT_ENTRIES 15 189 190 static skip_sdp_entry_t sdp_blacklist[] = {{76}}; // Apple Mouse and Keyboard 191 192 /* This flag will be true if HCI_Inquiry is in progress */ 193 static bool btif_dm_inquiry_in_progress = false; 194 195 /******************************************************************************* 196 * Static variables 197 ******************************************************************************/ 198 static char btif_default_local_name[DEFAULT_LOCAL_NAME_MAX + 1] = {'\0'}; 199 static uid_set_t* uid_set = NULL; 200 201 /* A circular array to keep track of the most recent bond events */ 202 static btif_bond_event_t btif_dm_bond_events[MAX_BTIF_BOND_EVENT_ENTRIES + 1]; 203 204 static std::mutex bond_event_lock; 205 206 /* |btif_num_bond_events| keeps track of the total number of events and can be 207 greater than |MAX_BTIF_BOND_EVENT_ENTRIES| */ 208 static size_t btif_num_bond_events = 0; 209 static size_t btif_events_start_index = 0; 210 static size_t btif_events_end_index = 0; 211 212 /****************************************************************************** 213 * Static functions 214 *****************************************************************************/ 215 static btif_dm_pairing_cb_t pairing_cb; 216 static btif_dm_oob_cb_t oob_cb; 217 static void btif_dm_generic_evt(uint16_t event, char* p_param); 218 static void btif_dm_cb_create_bond(bt_bdaddr_t* bd_addr, 219 tBTA_TRANSPORT transport); 220 static void btif_dm_cb_hid_remote_name(tBTM_REMOTE_DEV_NAME* p_remote_name); 221 static void btif_update_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name, 222 DEV_CLASS dev_class, 223 tBT_DEVICE_TYPE dev_type); 224 static btif_dm_local_key_cb_t ble_local_key_cb; 225 static void btif_dm_ble_key_notif_evt(tBTA_DM_SP_KEY_NOTIF* p_ssp_key_notif); 226 static void btif_dm_ble_auth_cmpl_evt(tBTA_DM_AUTH_CMPL* p_auth_cmpl); 227 static void btif_dm_ble_passkey_req_evt(tBTA_DM_PIN_REQ* p_pin_req); 228 static void btif_dm_ble_key_nc_req_evt(tBTA_DM_SP_KEY_NOTIF* p_notif_req); 229 static void btif_dm_ble_oob_req_evt(tBTA_DM_SP_RMT_OOB* req_oob_type); 230 static void btif_dm_ble_sc_oob_req_evt(tBTA_DM_SP_RMT_OOB* req_oob_type); 231 232 static void bte_scan_filt_param_cfg_evt(uint8_t action_type, uint8_t avbl_space, 233 uint8_t ref_value, uint8_t status); 234 235 static char* btif_get_default_local_name(); 236 237 static void btif_stats_add_bond_event(const bt_bdaddr_t* bd_addr, 238 bt_bond_function_t function, 239 bt_bond_state_t state); 240 241 /****************************************************************************** 242 * Externs 243 *****************************************************************************/ 244 extern bt_status_t btif_hf_execute_service(bool b_enable); 245 extern bt_status_t btif_av_execute_service(bool b_enable); 246 extern bt_status_t btif_av_sink_execute_service(bool b_enable); 247 extern bt_status_t btif_hh_execute_service(bool b_enable); 248 extern bt_status_t btif_hf_client_execute_service(bool b_enable); 249 extern bt_status_t btif_sdp_execute_service(bool b_enable); 250 extern int btif_hh_connect(bt_bdaddr_t* bd_addr); 251 extern void bta_gatt_convert_uuid16_to_uuid128(uint8_t uuid_128[LEN_UUID_128], 252 uint16_t uuid_16); 253 extern void btif_av_move_idle(bt_bdaddr_t bd_addr); 254 extern bt_status_t btif_hd_execute_service(bool b_enable); 255 256 /****************************************************************************** 257 * Functions 258 *****************************************************************************/ 259 260 static bool is_empty_128bit(uint8_t* data) { 261 static const uint8_t zero[16] = {0}; 262 return !memcmp(zero, data, sizeof(zero)); 263 } 264 265 static void btif_dm_data_copy(uint16_t event, char* dst, char* src) { 266 tBTA_DM_SEC* dst_dm_sec = (tBTA_DM_SEC*)dst; 267 tBTA_DM_SEC* src_dm_sec = (tBTA_DM_SEC*)src; 268 269 if (!src_dm_sec) return; 270 271 CHECK(dst_dm_sec); 272 maybe_non_aligned_memcpy(dst_dm_sec, src_dm_sec, sizeof(*src_dm_sec)); 273 274 if (event == BTA_DM_BLE_KEY_EVT) { 275 dst_dm_sec->ble_key.p_key_value = 276 (tBTM_LE_KEY_VALUE*)osi_malloc(sizeof(tBTM_LE_KEY_VALUE)); 277 CHECK(src_dm_sec->ble_key.p_key_value); 278 memcpy(dst_dm_sec->ble_key.p_key_value, src_dm_sec->ble_key.p_key_value, 279 sizeof(tBTM_LE_KEY_VALUE)); 280 } 281 } 282 283 static void btif_dm_data_free(uint16_t event, tBTA_DM_SEC* dm_sec) { 284 if (event == BTA_DM_BLE_KEY_EVT) 285 osi_free_and_reset((void**)&dm_sec->ble_key.p_key_value); 286 } 287 288 void btif_dm_init(uid_set_t* set) { uid_set = set; } 289 290 void btif_dm_cleanup(void) { 291 if (uid_set) { 292 uid_set_destroy(uid_set); 293 uid_set = NULL; 294 } 295 } 296 297 bt_status_t btif_in_execute_service_request(tBTA_SERVICE_ID service_id, 298 bool b_enable) { 299 BTIF_TRACE_DEBUG("%s service_id: %d", __func__, service_id); 300 /* Check the service_ID and invoke the profile's BT state changed API */ 301 switch (service_id) { 302 case BTA_HFP_SERVICE_ID: 303 case BTA_HSP_SERVICE_ID: { 304 btif_hf_execute_service(b_enable); 305 } break; 306 case BTA_A2DP_SOURCE_SERVICE_ID: { 307 btif_av_execute_service(b_enable); 308 } break; 309 case BTA_A2DP_SINK_SERVICE_ID: { 310 btif_av_sink_execute_service(b_enable); 311 } break; 312 case BTA_HID_SERVICE_ID: { 313 btif_hh_execute_service(b_enable); 314 } break; 315 case BTA_HFP_HS_SERVICE_ID: { 316 btif_hf_client_execute_service(b_enable); 317 } break; 318 case BTA_SDP_SERVICE_ID: { 319 btif_sdp_execute_service(b_enable); 320 } break; 321 case BTA_HIDD_SERVICE_ID: { 322 btif_hd_execute_service(b_enable); 323 } break; 324 default: 325 BTIF_TRACE_ERROR("%s: Unknown service %d being %s", __func__, service_id, 326 (b_enable) ? "enabled" : "disabled"); 327 return BT_STATUS_FAIL; 328 } 329 return BT_STATUS_SUCCESS; 330 } 331 332 /******************************************************************************* 333 * 334 * Function check_eir_remote_name 335 * 336 * Description Check if remote name is in the EIR data 337 * 338 * Returns true if remote name found 339 * Populate p_remote_name, if provided and remote name found 340 * 341 ******************************************************************************/ 342 static bool check_eir_remote_name(tBTA_DM_SEARCH* p_search_data, 343 uint8_t* p_remote_name, 344 uint8_t* p_remote_name_len) { 345 const uint8_t* p_eir_remote_name = NULL; 346 uint8_t remote_name_len = 0; 347 348 /* Check EIR for remote name and services */ 349 if (p_search_data->inq_res.p_eir) { 350 p_eir_remote_name = AdvertiseDataParser::GetFieldByType( 351 p_search_data->inq_res.p_eir, p_search_data->inq_res.eir_len, 352 BTM_EIR_COMPLETE_LOCAL_NAME_TYPE, &remote_name_len); 353 if (!p_eir_remote_name) { 354 p_eir_remote_name = AdvertiseDataParser::GetFieldByType( 355 p_search_data->inq_res.p_eir, p_search_data->inq_res.eir_len, 356 BTM_EIR_SHORTENED_LOCAL_NAME_TYPE, &remote_name_len); 357 } 358 359 if (p_eir_remote_name) { 360 if (remote_name_len > BD_NAME_LEN) remote_name_len = BD_NAME_LEN; 361 362 if (p_remote_name && p_remote_name_len) { 363 memcpy(p_remote_name, p_eir_remote_name, remote_name_len); 364 *(p_remote_name + remote_name_len) = 0; 365 *p_remote_name_len = remote_name_len; 366 } 367 368 return true; 369 } 370 } 371 372 return false; 373 } 374 375 /******************************************************************************* 376 * 377 * Function check_cached_remote_name 378 * 379 * Description Check if remote name is in the NVRAM cache 380 * 381 * Returns true if remote name found 382 * Populate p_remote_name, if provided and remote name found 383 * 384 ******************************************************************************/ 385 static bool check_cached_remote_name(tBTA_DM_SEARCH* p_search_data, 386 uint8_t* p_remote_name, 387 uint8_t* p_remote_name_len) { 388 bt_bdname_t bdname; 389 bt_bdaddr_t remote_bdaddr; 390 bt_property_t prop_name; 391 392 /* check if we already have it in our btif_storage cache */ 393 bdcpy(remote_bdaddr.address, p_search_data->inq_res.bd_addr); 394 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_BDNAME, 395 sizeof(bt_bdname_t), &bdname); 396 if (btif_storage_get_remote_device_property(&remote_bdaddr, &prop_name) == 397 BT_STATUS_SUCCESS) { 398 if (p_remote_name && p_remote_name_len) { 399 strcpy((char*)p_remote_name, (char*)bdname.name); 400 *p_remote_name_len = strlen((char*)p_remote_name); 401 } 402 return true; 403 } 404 405 return false; 406 } 407 408 static uint32_t get_cod(const bt_bdaddr_t* remote_bdaddr) { 409 uint32_t remote_cod; 410 bt_property_t prop_name; 411 412 /* check if we already have it in our btif_storage cache */ 413 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_CLASS_OF_DEVICE, 414 sizeof(uint32_t), &remote_cod); 415 if (btif_storage_get_remote_device_property( 416 (bt_bdaddr_t*)remote_bdaddr, &prop_name) == BT_STATUS_SUCCESS) { 417 LOG_INFO(LOG_TAG, "%s remote_cod = 0x%08x", __func__, remote_cod); 418 return remote_cod & COD_MASK; 419 } 420 421 return 0; 422 } 423 424 bool check_cod(const bt_bdaddr_t* remote_bdaddr, uint32_t cod) { 425 return get_cod(remote_bdaddr) == cod; 426 } 427 428 bool check_cod_hid(const bt_bdaddr_t* remote_bdaddr) { 429 return (get_cod(remote_bdaddr) & COD_HID_MASK) == COD_HID_MAJOR; 430 } 431 432 bool check_hid_le(const bt_bdaddr_t* remote_bdaddr) { 433 uint32_t remote_dev_type; 434 bt_property_t prop_name; 435 436 /* check if we already have it in our btif_storage cache */ 437 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_TYPE_OF_DEVICE, 438 sizeof(uint32_t), &remote_dev_type); 439 if (btif_storage_get_remote_device_property( 440 (bt_bdaddr_t*)remote_bdaddr, &prop_name) == BT_STATUS_SUCCESS) { 441 if (remote_dev_type == BT_DEVICE_DEVTYPE_BLE) { 442 bdstr_t bdstr; 443 bdaddr_to_string(remote_bdaddr, bdstr, sizeof(bdstr)); 444 if (btif_config_exist(bdstr, "HidAppId")) return true; 445 } 446 } 447 return false; 448 } 449 450 /***************************************************************************** 451 * 452 * Function check_sdp_bl 453 * 454 * Description Checks if a given device is blacklisted to skip sdp 455 * 456 * Parameters skip_sdp_entry 457 * 458 * Returns true if the device is present in blacklist, else false 459 * 460 ******************************************************************************/ 461 bool check_sdp_bl(const bt_bdaddr_t* remote_bdaddr) { 462 uint16_t manufacturer = 0; 463 uint8_t lmp_ver = 0; 464 uint16_t lmp_subver = 0; 465 bt_property_t prop_name; 466 bt_remote_version_t info; 467 468 if (remote_bdaddr == NULL) return false; 469 470 /* fetch additional info about remote device used in iop query */ 471 BTM_ReadRemoteVersion(*(BD_ADDR*)remote_bdaddr, &lmp_ver, &manufacturer, 472 &lmp_subver); 473 474 /* if not available yet, try fetching from config database */ 475 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_REMOTE_VERSION_INFO, 476 sizeof(bt_remote_version_t), &info); 477 478 if (btif_storage_get_remote_device_property( 479 (bt_bdaddr_t*)remote_bdaddr, &prop_name) != BT_STATUS_SUCCESS) { 480 return false; 481 } 482 manufacturer = info.manufacturer; 483 484 for (unsigned int i = 0; i < ARRAY_SIZE(sdp_blacklist); i++) { 485 if (manufacturer == sdp_blacklist[i].manufact_id) return true; 486 } 487 return false; 488 } 489 490 static void bond_state_changed(bt_status_t status, bt_bdaddr_t* bd_addr, 491 bt_bond_state_t state) { 492 btif_stats_add_bond_event(bd_addr, BTIF_DM_FUNC_BOND_STATE_CHANGED, state); 493 494 // Send bonding state only once - based on outgoing/incoming we may receive 495 // duplicates 496 if ((pairing_cb.state == state) && (state == BT_BOND_STATE_BONDING)) { 497 // Cross key pairing so send callback for static address 498 if (!bdaddr_is_empty(&pairing_cb.static_bdaddr)) { 499 HAL_CBACK(bt_hal_cbacks, bond_state_changed_cb, status, bd_addr, state); 500 } 501 return; 502 } 503 504 if (pairing_cb.bond_type == BOND_TYPE_TEMPORARY) state = BT_BOND_STATE_NONE; 505 506 BTIF_TRACE_DEBUG("%s: state=%d, prev_state=%d, sdp_attempts = %d", __func__, 507 state, pairing_cb.state, pairing_cb.sdp_attempts); 508 509 HAL_CBACK(bt_hal_cbacks, bond_state_changed_cb, status, bd_addr, state); 510 511 if (state == BT_BOND_STATE_BONDING) { 512 pairing_cb.state = state; 513 bdcpy(pairing_cb.bd_addr, bd_addr->address); 514 } else { 515 if (!pairing_cb.sdp_attempts) 516 memset(&pairing_cb, 0, sizeof(pairing_cb)); 517 else 518 BTIF_TRACE_DEBUG("%s: BR-EDR service discovery active", __func__); 519 } 520 } 521 522 /* store remote version in bt config to always have access 523 to it post pairing*/ 524 static void btif_update_remote_version_property(bt_bdaddr_t* p_bd) { 525 bt_property_t property; 526 uint8_t lmp_ver = 0; 527 uint16_t lmp_subver = 0; 528 uint16_t mfct_set = 0; 529 tBTM_STATUS btm_status; 530 bt_remote_version_t info; 531 bt_status_t status; 532 bdstr_t bdstr; 533 534 btm_status = 535 BTM_ReadRemoteVersion(*(BD_ADDR*)p_bd, &lmp_ver, &mfct_set, &lmp_subver); 536 537 LOG_DEBUG(LOG_TAG, "remote version info [%s]: %x, %x, %x", 538 bdaddr_to_string(p_bd, bdstr, sizeof(bdstr)), lmp_ver, mfct_set, 539 lmp_subver); 540 541 if (btm_status == BTM_SUCCESS) { 542 // Always update cache to ensure we have availability whenever BTM API is 543 // not populated 544 info.manufacturer = mfct_set; 545 info.sub_ver = lmp_subver; 546 info.version = lmp_ver; 547 BTIF_STORAGE_FILL_PROPERTY(&property, BT_PROPERTY_REMOTE_VERSION_INFO, 548 sizeof(bt_remote_version_t), &info); 549 status = btif_storage_set_remote_device_property(p_bd, &property); 550 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote version", 551 status); 552 } 553 } 554 555 static void btif_update_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name, 556 DEV_CLASS dev_class, 557 tBT_DEVICE_TYPE device_type) { 558 int num_properties = 0; 559 bt_property_t properties[3]; 560 bt_bdaddr_t bdaddr; 561 bt_status_t status; 562 uint32_t cod; 563 bt_device_type_t dev_type; 564 565 memset(properties, 0, sizeof(properties)); 566 bdcpy(bdaddr.address, bd_addr); 567 568 /* remote name */ 569 if (strlen((const char*)bd_name)) { 570 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], BT_PROPERTY_BDNAME, 571 strlen((char*)bd_name), bd_name); 572 status = btif_storage_set_remote_device_property( 573 &bdaddr, &properties[num_properties]); 574 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device name", 575 status); 576 num_properties++; 577 } 578 579 /* class of device */ 580 cod = devclass2uint(dev_class); 581 BTIF_TRACE_DEBUG("%s cod is 0x%06x", __func__, cod); 582 if (cod == 0) { 583 /* Try to retrieve cod from storage */ 584 BTIF_TRACE_DEBUG("%s cod is 0, checking cod from storage", __func__); 585 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 586 BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod); 587 status = btif_storage_get_remote_device_property( 588 &bdaddr, &properties[num_properties]); 589 BTIF_TRACE_DEBUG("%s cod retrieved from storage is 0x%06x", __func__, cod); 590 if (cod == 0) { 591 BTIF_TRACE_DEBUG("%s cod is again 0, set as unclassified", __func__); 592 cod = COD_UNCLASSIFIED; 593 } 594 } 595 596 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 597 BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod); 598 status = btif_storage_set_remote_device_property(&bdaddr, 599 &properties[num_properties]); 600 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device class", 601 status); 602 num_properties++; 603 604 /* device type */ 605 bt_property_t prop_name; 606 uint8_t remote_dev_type; 607 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_TYPE_OF_DEVICE, 608 sizeof(uint8_t), &remote_dev_type); 609 if (btif_storage_get_remote_device_property(&bdaddr, &prop_name) == 610 BT_STATUS_SUCCESS) 611 dev_type = (bt_device_type_t)(remote_dev_type | device_type); 612 else 613 dev_type = (bt_device_type_t)device_type; 614 615 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 616 BT_PROPERTY_TYPE_OF_DEVICE, sizeof(dev_type), 617 &dev_type); 618 status = btif_storage_set_remote_device_property(&bdaddr, 619 &properties[num_properties]); 620 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device type", 621 status); 622 num_properties++; 623 624 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, status, &bdaddr, 625 num_properties, properties); 626 } 627 628 /******************************************************************************* 629 * 630 * Function btif_dm_cb_hid_remote_name 631 * 632 * Description Remote name callback for HID device. Called in btif context 633 * Special handling for HID devices 634 * 635 * Returns void 636 * 637 ******************************************************************************/ 638 static void btif_dm_cb_hid_remote_name(tBTM_REMOTE_DEV_NAME* p_remote_name) { 639 BTIF_TRACE_DEBUG("%s: status=%d pairing_cb.state=%d", __func__, 640 p_remote_name->status, pairing_cb.state); 641 if (pairing_cb.state == BT_BOND_STATE_BONDING) { 642 bt_bdaddr_t remote_bd; 643 644 bdcpy(remote_bd.address, pairing_cb.bd_addr); 645 646 if (p_remote_name->status == BTM_SUCCESS) { 647 bond_state_changed(BT_STATUS_SUCCESS, &remote_bd, BT_BOND_STATE_BONDED); 648 } else 649 bond_state_changed(BT_STATUS_FAIL, &remote_bd, BT_BOND_STATE_NONE); 650 } 651 } 652 653 /******************************************************************************* 654 * 655 * Function btif_dm_cb_create_bond 656 * 657 * Description Create bond initiated from the BTIF thread context 658 * Special handling for HID devices 659 * 660 * Returns void 661 * 662 ******************************************************************************/ 663 static void btif_dm_cb_create_bond(bt_bdaddr_t* bd_addr, 664 tBTA_TRANSPORT transport) { 665 bool is_hid = check_cod(bd_addr, COD_HID_POINTING); 666 bond_state_changed(BT_STATUS_SUCCESS, bd_addr, BT_BOND_STATE_BONDING); 667 668 int device_type; 669 int addr_type; 670 bdstr_t bdstr; 671 bdaddr_to_string(bd_addr, bdstr, sizeof(bdstr)); 672 if (transport == BT_TRANSPORT_LE) { 673 if (!btif_config_get_int((char const*)&bdstr, "DevType", &device_type)) { 674 btif_config_set_int(bdstr, "DevType", BT_DEVICE_TYPE_BLE); 675 } 676 if (btif_storage_get_remote_addr_type(bd_addr, &addr_type) != 677 BT_STATUS_SUCCESS) { 678 // Try to read address type. OOB pairing might have set it earlier, but 679 // didn't store it, it defaults to BLE_ADDR_PUBLIC 680 uint8_t tmp_dev_type; 681 uint8_t tmp_addr_type; 682 BTM_ReadDevInfo(bd_addr->address, &tmp_dev_type, &tmp_addr_type); 683 addr_type = tmp_addr_type; 684 685 btif_storage_set_remote_addr_type(bd_addr, addr_type); 686 } 687 } 688 if ((btif_config_get_int((char const*)&bdstr, "DevType", &device_type) && 689 (btif_storage_get_remote_addr_type(bd_addr, &addr_type) == 690 BT_STATUS_SUCCESS) && 691 (device_type & BT_DEVICE_TYPE_BLE) == BT_DEVICE_TYPE_BLE) || 692 (transport == BT_TRANSPORT_LE)) { 693 BTA_DmAddBleDevice(bd_addr->address, addr_type, device_type); 694 } 695 696 if (is_hid && (device_type & BT_DEVICE_TYPE_BLE) == 0) { 697 bt_status_t status; 698 status = (bt_status_t)btif_hh_connect(bd_addr); 699 if (status != BT_STATUS_SUCCESS) 700 bond_state_changed(status, bd_addr, BT_BOND_STATE_NONE); 701 } else { 702 BTA_DmBondByTransport((uint8_t*)bd_addr->address, transport); 703 } 704 /* Track originator of bond creation */ 705 pairing_cb.is_local_initiated = true; 706 } 707 708 /******************************************************************************* 709 * 710 * Function btif_dm_cb_remove_bond 711 * 712 * Description remove bond initiated from the BTIF thread context 713 * Special handling for HID devices 714 * 715 * Returns void 716 * 717 ******************************************************************************/ 718 void btif_dm_cb_remove_bond(bt_bdaddr_t* bd_addr) { 719 /*special handling for HID devices */ 720 /* VUP needs to be sent if its a HID Device. The HID HOST module will check if 721 there 722 is a valid hid connection with this bd_addr. If yes VUP will be issued.*/ 723 #if (BTA_HH_INCLUDED == TRUE) 724 if (btif_hh_virtual_unplug(bd_addr) != BT_STATUS_SUCCESS) 725 #endif 726 { 727 BTIF_TRACE_DEBUG("%s: Removing HH device", __func__); 728 BTA_DmRemoveDevice((uint8_t*)bd_addr->address); 729 } 730 } 731 732 /******************************************************************************* 733 * 734 * Function btif_dm_get_connection_state 735 * 736 * Description Returns whether the remote device is currently connected 737 * and whether encryption is active for the connection 738 * 739 * Returns 0 if not connected; 1 if connected and > 1 if connection is 740 * encrypted 741 * 742 ******************************************************************************/ 743 uint16_t btif_dm_get_connection_state(const bt_bdaddr_t* bd_addr) { 744 uint8_t* bda = (uint8_t*)bd_addr->address; 745 uint16_t rc = BTA_DmGetConnectionState(bda); 746 747 if (rc != 0) { 748 uint8_t flags = 0; 749 750 BTM_GetSecurityFlagsByTransport(bda, &flags, BT_TRANSPORT_BR_EDR); 751 BTIF_TRACE_DEBUG("%s: security flags (BR/EDR)=0x%02x", __func__, flags); 752 if (flags & BTM_SEC_FLAG_ENCRYPTED) rc |= ENCRYPTED_BREDR; 753 754 BTM_GetSecurityFlagsByTransport(bda, &flags, BT_TRANSPORT_LE); 755 BTIF_TRACE_DEBUG("%s: security flags (LE)=0x%02x", __func__, flags); 756 if (flags & BTM_SEC_FLAG_ENCRYPTED) rc |= ENCRYPTED_LE; 757 } 758 759 return rc; 760 } 761 762 /******************************************************************************* 763 * 764 * Function search_devices_copy_cb 765 * 766 * Description Deep copy callback for search devices event 767 * 768 * Returns void 769 * 770 ******************************************************************************/ 771 static void search_devices_copy_cb(uint16_t event, char* p_dest, char* p_src) { 772 tBTA_DM_SEARCH* p_dest_data = (tBTA_DM_SEARCH*)p_dest; 773 tBTA_DM_SEARCH* p_src_data = (tBTA_DM_SEARCH*)p_src; 774 775 if (!p_src) return; 776 777 BTIF_TRACE_DEBUG("%s: event=%s", __func__, dump_dm_search_event(event)); 778 maybe_non_aligned_memcpy(p_dest_data, p_src_data, sizeof(*p_src_data)); 779 switch (event) { 780 case BTA_DM_INQ_RES_EVT: { 781 if (p_src_data->inq_res.p_eir) { 782 p_dest_data->inq_res.p_eir = 783 (uint8_t*)(p_dest + sizeof(tBTA_DM_SEARCH)); 784 memcpy(p_dest_data->inq_res.p_eir, p_src_data->inq_res.p_eir, 785 p_src_data->inq_res.eir_len); 786 p_dest_data->inq_res.eir_len = p_src_data->inq_res.eir_len; 787 } 788 } break; 789 790 case BTA_DM_DISC_RES_EVT: { 791 if (p_src_data->disc_res.raw_data_size && 792 p_src_data->disc_res.p_raw_data) { 793 p_dest_data->disc_res.p_raw_data = 794 (uint8_t*)(p_dest + sizeof(tBTA_DM_SEARCH)); 795 memcpy(p_dest_data->disc_res.p_raw_data, 796 p_src_data->disc_res.p_raw_data, 797 p_src_data->disc_res.raw_data_size); 798 } 799 } break; 800 } 801 } 802 803 static void search_services_copy_cb(uint16_t event, char* p_dest, char* p_src) { 804 tBTA_DM_SEARCH* p_dest_data = (tBTA_DM_SEARCH*)p_dest; 805 tBTA_DM_SEARCH* p_src_data = (tBTA_DM_SEARCH*)p_src; 806 807 if (!p_src) return; 808 maybe_non_aligned_memcpy(p_dest_data, p_src_data, sizeof(*p_src_data)); 809 switch (event) { 810 case BTA_DM_DISC_RES_EVT: { 811 if (p_src_data->disc_res.result == BTA_SUCCESS) { 812 if (p_src_data->disc_res.num_uuids > 0) { 813 p_dest_data->disc_res.p_uuid_list = 814 (uint8_t*)(p_dest + sizeof(tBTA_DM_SEARCH)); 815 memcpy(p_dest_data->disc_res.p_uuid_list, 816 p_src_data->disc_res.p_uuid_list, 817 p_src_data->disc_res.num_uuids * MAX_UUID_SIZE); 818 osi_free_and_reset((void**)&p_src_data->disc_res.p_uuid_list); 819 } 820 osi_free_and_reset((void**)&p_src_data->disc_res.p_raw_data); 821 } 822 } break; 823 } 824 } 825 /****************************************************************************** 826 * 827 * BTIF DM callback events 828 * 829 ****************************************************************************/ 830 831 /******************************************************************************* 832 * 833 * Function btif_dm_pin_req_evt 834 * 835 * Description Executes pin request event in btif context 836 * 837 * Returns void 838 * 839 ******************************************************************************/ 840 static void btif_dm_pin_req_evt(tBTA_DM_PIN_REQ* p_pin_req) { 841 bt_bdaddr_t bd_addr; 842 bt_bdname_t bd_name; 843 uint32_t cod; 844 bt_pin_code_t pin_code; 845 int dev_type; 846 847 /* Remote properties update */ 848 if (!btif_get_device_type(p_pin_req->bd_addr, &dev_type)) { 849 dev_type = BT_DEVICE_TYPE_BREDR; 850 } 851 btif_update_remote_properties(p_pin_req->bd_addr, p_pin_req->bd_name, 852 p_pin_req->dev_class, 853 (tBT_DEVICE_TYPE)dev_type); 854 855 bdcpy(bd_addr.address, p_pin_req->bd_addr); 856 memcpy(bd_name.name, p_pin_req->bd_name, BD_NAME_LEN); 857 858 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 859 860 cod = devclass2uint(p_pin_req->dev_class); 861 862 if (cod == 0) { 863 BTIF_TRACE_DEBUG("%s cod is 0, set as unclassified", __func__); 864 cod = COD_UNCLASSIFIED; 865 } 866 867 /* check for auto pair possiblity only if bond was initiated by local device 868 */ 869 if (pairing_cb.is_local_initiated && (p_pin_req->min_16_digit == false)) { 870 if (check_cod(&bd_addr, COD_AV_HEADSETS) || 871 check_cod(&bd_addr, COD_AV_HEADPHONES) || 872 check_cod(&bd_addr, COD_AV_PORTABLE_AUDIO) || 873 check_cod(&bd_addr, COD_AV_HIFI_AUDIO) || 874 check_cod(&bd_addr, COD_HID_POINTING)) { 875 /* Check if this device can be auto paired */ 876 if (!interop_match_addr(INTEROP_DISABLE_AUTO_PAIRING, &bd_addr) && 877 !interop_match_name(INTEROP_DISABLE_AUTO_PAIRING, 878 (const char*)bd_name.name) && 879 (pairing_cb.autopair_attempts == 0)) { 880 BTIF_TRACE_DEBUG("%s() Attempting auto pair", __func__); 881 pin_code.pin[0] = 0x30; 882 pin_code.pin[1] = 0x30; 883 pin_code.pin[2] = 0x30; 884 pin_code.pin[3] = 0x30; 885 886 pairing_cb.autopair_attempts++; 887 BTA_DmPinReply((uint8_t*)bd_addr.address, true, 4, pin_code.pin); 888 return; 889 } 890 } else if (check_cod(&bd_addr, COD_HID_KEYBOARD) || 891 check_cod(&bd_addr, COD_HID_COMBO)) { 892 if ((interop_match_addr(INTEROP_KEYBOARD_REQUIRES_FIXED_PIN, &bd_addr) == 893 true) && 894 (pairing_cb.autopair_attempts == 0)) { 895 BTIF_TRACE_DEBUG("%s() Attempting auto pair", __func__); 896 pin_code.pin[0] = 0x30; 897 pin_code.pin[1] = 0x30; 898 pin_code.pin[2] = 0x30; 899 pin_code.pin[3] = 0x30; 900 901 pairing_cb.autopair_attempts++; 902 BTA_DmPinReply((uint8_t*)bd_addr.address, true, 4, pin_code.pin); 903 return; 904 } 905 } 906 } 907 HAL_CBACK(bt_hal_cbacks, pin_request_cb, &bd_addr, &bd_name, cod, 908 p_pin_req->min_16_digit); 909 } 910 911 /******************************************************************************* 912 * 913 * Function btif_dm_ssp_cfm_req_evt 914 * 915 * Description Executes SSP confirm request event in btif context 916 * 917 * Returns void 918 * 919 ******************************************************************************/ 920 static void btif_dm_ssp_cfm_req_evt(tBTA_DM_SP_CFM_REQ* p_ssp_cfm_req) { 921 bt_bdaddr_t bd_addr; 922 bt_bdname_t bd_name; 923 uint32_t cod; 924 bool is_incoming = !(pairing_cb.state == BT_BOND_STATE_BONDING); 925 int dev_type; 926 927 BTIF_TRACE_DEBUG("%s", __func__); 928 929 /* Remote properties update */ 930 if (!btif_get_device_type(p_ssp_cfm_req->bd_addr, &dev_type)) { 931 dev_type = BT_DEVICE_TYPE_BREDR; 932 } 933 btif_update_remote_properties(p_ssp_cfm_req->bd_addr, p_ssp_cfm_req->bd_name, 934 p_ssp_cfm_req->dev_class, 935 (tBT_DEVICE_TYPE)dev_type); 936 937 bdcpy(bd_addr.address, p_ssp_cfm_req->bd_addr); 938 memcpy(bd_name.name, p_ssp_cfm_req->bd_name, BD_NAME_LEN); 939 940 /* Set the pairing_cb based on the local & remote authentication requirements 941 */ 942 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 943 944 /* if just_works and bonding bit is not set treat this as temporary */ 945 if (p_ssp_cfm_req->just_works && 946 !(p_ssp_cfm_req->loc_auth_req & BTM_AUTH_BONDS) && 947 !(p_ssp_cfm_req->rmt_auth_req & BTM_AUTH_BONDS) && 948 !(check_cod((bt_bdaddr_t*)&p_ssp_cfm_req->bd_addr, COD_HID_POINTING))) 949 pairing_cb.bond_type = BOND_TYPE_TEMPORARY; 950 else 951 pairing_cb.bond_type = BOND_TYPE_PERSISTENT; 952 953 btm_set_bond_type_dev(p_ssp_cfm_req->bd_addr, pairing_cb.bond_type); 954 955 pairing_cb.is_ssp = true; 956 957 /* If JustWorks auto-accept */ 958 if (p_ssp_cfm_req->just_works) { 959 /* Pairing consent for JustWorks needed if: 960 * 1. Incoming (non-temporary) pairing is detected AND 961 * 2. local IO capabilities are DisplayYesNo AND 962 * 3. remote IO capabiltiies are DisplayOnly or NoInputNoOutput; 963 */ 964 if (is_incoming && pairing_cb.bond_type != BOND_TYPE_TEMPORARY && 965 ((p_ssp_cfm_req->loc_io_caps == HCI_IO_CAP_DISPLAY_YESNO) && 966 (p_ssp_cfm_req->rmt_io_caps == HCI_IO_CAP_DISPLAY_ONLY || 967 p_ssp_cfm_req->rmt_io_caps == HCI_IO_CAP_NO_IO))) { 968 BTIF_TRACE_EVENT( 969 "%s: User consent needed for incoming pairing request. loc_io_caps: " 970 "%d, rmt_io_caps: %d", 971 __func__, p_ssp_cfm_req->loc_io_caps, p_ssp_cfm_req->rmt_io_caps); 972 } else { 973 BTIF_TRACE_EVENT("%s: Auto-accept JustWorks pairing", __func__); 974 btif_dm_ssp_reply(&bd_addr, BT_SSP_VARIANT_CONSENT, true, 0); 975 return; 976 } 977 } 978 979 cod = devclass2uint(p_ssp_cfm_req->dev_class); 980 981 if (cod == 0) { 982 LOG_DEBUG(LOG_TAG, "%s cod is 0, set as unclassified", __func__); 983 cod = COD_UNCLASSIFIED; 984 } 985 986 pairing_cb.sdp_attempts = 0; 987 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod, 988 (p_ssp_cfm_req->just_works ? BT_SSP_VARIANT_CONSENT 989 : BT_SSP_VARIANT_PASSKEY_CONFIRMATION), 990 p_ssp_cfm_req->num_val); 991 } 992 993 static void btif_dm_ssp_key_notif_evt(tBTA_DM_SP_KEY_NOTIF* p_ssp_key_notif) { 994 bt_bdaddr_t bd_addr; 995 bt_bdname_t bd_name; 996 uint32_t cod; 997 int dev_type; 998 999 BTIF_TRACE_DEBUG("%s", __func__); 1000 1001 /* Remote properties update */ 1002 if (!btif_get_device_type(p_ssp_key_notif->bd_addr, &dev_type)) { 1003 dev_type = BT_DEVICE_TYPE_BREDR; 1004 } 1005 btif_update_remote_properties( 1006 p_ssp_key_notif->bd_addr, p_ssp_key_notif->bd_name, 1007 p_ssp_key_notif->dev_class, (tBT_DEVICE_TYPE)dev_type); 1008 1009 bdcpy(bd_addr.address, p_ssp_key_notif->bd_addr); 1010 memcpy(bd_name.name, p_ssp_key_notif->bd_name, BD_NAME_LEN); 1011 1012 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 1013 pairing_cb.is_ssp = true; 1014 cod = devclass2uint(p_ssp_key_notif->dev_class); 1015 1016 if (cod == 0) { 1017 LOG_DEBUG(LOG_TAG, "%s cod is 0, set as unclassified", __func__); 1018 cod = COD_UNCLASSIFIED; 1019 } 1020 1021 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod, 1022 BT_SSP_VARIANT_PASSKEY_NOTIFICATION, p_ssp_key_notif->passkey); 1023 } 1024 /******************************************************************************* 1025 * 1026 * Function btif_dm_auth_cmpl_evt 1027 * 1028 * Description Executes authentication complete event in btif context 1029 * 1030 * Returns void 1031 * 1032 ******************************************************************************/ 1033 static void btif_dm_auth_cmpl_evt(tBTA_DM_AUTH_CMPL* p_auth_cmpl) { 1034 /* Save link key, if not temporary */ 1035 bt_bdaddr_t bd_addr; 1036 bt_status_t status = BT_STATUS_FAIL; 1037 bt_bond_state_t state = BT_BOND_STATE_NONE; 1038 bool skip_sdp = false; 1039 1040 BTIF_TRACE_DEBUG("%s: bond state=%d", __func__, pairing_cb.state); 1041 1042 bdcpy(bd_addr.address, p_auth_cmpl->bd_addr); 1043 if ((p_auth_cmpl->success == true) && (p_auth_cmpl->key_present)) { 1044 if ((p_auth_cmpl->key_type < HCI_LKEY_TYPE_DEBUG_COMB) || 1045 (p_auth_cmpl->key_type == HCI_LKEY_TYPE_AUTH_COMB) || 1046 (p_auth_cmpl->key_type == HCI_LKEY_TYPE_CHANGED_COMB) || 1047 (p_auth_cmpl->key_type == HCI_LKEY_TYPE_AUTH_COMB_P_256) || 1048 pairing_cb.bond_type == BOND_TYPE_PERSISTENT) { 1049 bt_status_t ret; 1050 BTIF_TRACE_DEBUG("%s: Storing link key. key_type=0x%x, bond_type=%d", 1051 __func__, p_auth_cmpl->key_type, pairing_cb.bond_type); 1052 ret = btif_storage_add_bonded_device(&bd_addr, p_auth_cmpl->key, 1053 p_auth_cmpl->key_type, 1054 pairing_cb.pin_code_len); 1055 ASSERTC(ret == BT_STATUS_SUCCESS, "storing link key failed", ret); 1056 } else { 1057 BTIF_TRACE_DEBUG( 1058 "%s: Temporary key. Not storing. key_type=0x%x, bond_type=%d", 1059 __func__, p_auth_cmpl->key_type, pairing_cb.bond_type); 1060 if (pairing_cb.bond_type == BOND_TYPE_TEMPORARY) { 1061 BTIF_TRACE_DEBUG("%s: sending BT_BOND_STATE_NONE for Temp pairing", 1062 __func__); 1063 btif_storage_remove_bonded_device(&bd_addr); 1064 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_NONE); 1065 return; 1066 } 1067 } 1068 } 1069 1070 // We could have received a new link key without going through the pairing 1071 // flow. If so, we don't want to perform SDP or any other operations on the 1072 // authenticated device. Also, make sure that the link key is not derived from 1073 // secure LTK, because we will need to perform SDP in case of link key 1074 // derivation to allow bond state change notification for the BR/EDR transport 1075 // so that the subsequent BR/EDR connections to the remote can use the derived 1076 // link key. 1077 if ((bdcmp(p_auth_cmpl->bd_addr, pairing_cb.bd_addr) != 0) && 1078 (!pairing_cb.ble.is_penc_key_rcvd)) { 1079 char address[32]; 1080 bt_bdaddr_t bt_bdaddr; 1081 1082 memcpy(bt_bdaddr.address, p_auth_cmpl->bd_addr, sizeof(bt_bdaddr.address)); 1083 bdaddr_to_string(&bt_bdaddr, address, sizeof(address)); 1084 LOG_INFO(LOG_TAG, 1085 "%s skipping SDP since we did not initiate pairing to %s.", 1086 __func__, address); 1087 return; 1088 } 1089 1090 // Skip SDP for certain HID Devices 1091 if (p_auth_cmpl->success) { 1092 btif_storage_set_remote_addr_type(&bd_addr, p_auth_cmpl->addr_type); 1093 btif_update_remote_properties(p_auth_cmpl->bd_addr, p_auth_cmpl->bd_name, 1094 NULL, p_auth_cmpl->dev_type); 1095 pairing_cb.timeout_retries = 0; 1096 status = BT_STATUS_SUCCESS; 1097 state = BT_BOND_STATE_BONDED; 1098 bdcpy(bd_addr.address, p_auth_cmpl->bd_addr); 1099 1100 if (check_sdp_bl(&bd_addr) && check_cod_hid(&bd_addr)) { 1101 LOG_WARN(LOG_TAG, "%s:skip SDP", __func__); 1102 skip_sdp = true; 1103 } 1104 if (!pairing_cb.is_local_initiated && skip_sdp) { 1105 bond_state_changed(status, &bd_addr, state); 1106 1107 LOG_WARN(LOG_TAG, "%s: Incoming HID Connection", __func__); 1108 bt_property_t prop; 1109 bt_bdaddr_t bd_addr; 1110 bt_uuid_t uuid; 1111 char uuid_str[128] = UUID_HUMAN_INTERFACE_DEVICE; 1112 1113 string_to_uuid(uuid_str, &uuid); 1114 1115 prop.type = BT_PROPERTY_UUIDS; 1116 prop.val = uuid.uu; 1117 prop.len = MAX_UUID_SIZE; 1118 1119 /* Send the event to the BTIF */ 1120 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, BT_STATUS_SUCCESS, 1121 &bd_addr, 1, &prop); 1122 } else { 1123 bool is_crosskey = false; 1124 /* If bonded due to cross-key, save the static address too*/ 1125 if (pairing_cb.state == BT_BOND_STATE_BONDING && 1126 (bdcmp(p_auth_cmpl->bd_addr, pairing_cb.bd_addr) != 0)) { 1127 BTIF_TRACE_DEBUG( 1128 "%s: bonding initiated due to cross key, adding static address", 1129 __func__); 1130 bdcpy(pairing_cb.static_bdaddr.address, p_auth_cmpl->bd_addr); 1131 is_crosskey = true; 1132 } 1133 if (!is_crosskey || 1134 !(stack_config_get_interface()->get_pts_crosskey_sdp_disable())) { 1135 // Ensure inquiry is stopped before attempting service discovery 1136 btif_dm_cancel_discovery(); 1137 1138 /* Trigger SDP on the device */ 1139 pairing_cb.sdp_attempts = 1; 1140 btif_dm_get_remote_services(&bd_addr); 1141 } 1142 } 1143 // Do not call bond_state_changed_cb yet. Wait until remote service 1144 // discovery is complete 1145 } else { 1146 // Map the HCI fail reason to bt status 1147 switch (p_auth_cmpl->fail_reason) { 1148 case HCI_ERR_PAGE_TIMEOUT: 1149 case HCI_ERR_LMP_RESPONSE_TIMEOUT: 1150 if (interop_match_addr(INTEROP_AUTO_RETRY_PAIRING, &bd_addr) && 1151 pairing_cb.timeout_retries) { 1152 BTIF_TRACE_WARNING("%s() - Pairing timeout; retrying (%d) ...", 1153 __func__, pairing_cb.timeout_retries); 1154 --pairing_cb.timeout_retries; 1155 btif_dm_cb_create_bond(&bd_addr, BTA_TRANSPORT_UNKNOWN); 1156 return; 1157 } 1158 /* Fall-through */ 1159 case HCI_ERR_CONNECTION_TOUT: 1160 status = BT_STATUS_RMT_DEV_DOWN; 1161 break; 1162 1163 case HCI_ERR_PAIRING_NOT_ALLOWED: 1164 btif_storage_remove_bonded_device(&bd_addr); 1165 status = BT_STATUS_AUTH_REJECTED; 1166 break; 1167 1168 /* map the auth failure codes, so we can retry pairing if necessary */ 1169 case HCI_ERR_AUTH_FAILURE: 1170 case HCI_ERR_KEY_MISSING: 1171 btif_storage_remove_bonded_device(&bd_addr); 1172 case HCI_ERR_HOST_REJECT_SECURITY: 1173 case HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE: 1174 case HCI_ERR_UNIT_KEY_USED: 1175 case HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED: 1176 case HCI_ERR_INSUFFCIENT_SECURITY: 1177 case HCI_ERR_PEER_USER: 1178 case HCI_ERR_UNSPECIFIED: 1179 BTIF_TRACE_DEBUG(" %s() Authentication fail reason %d", __func__, 1180 p_auth_cmpl->fail_reason); 1181 if (pairing_cb.autopair_attempts == 1) { 1182 /* Create the Bond once again */ 1183 BTIF_TRACE_WARNING("%s() auto pair failed. Reinitiate Bond", 1184 __func__); 1185 btif_dm_cb_create_bond(&bd_addr, BTA_TRANSPORT_UNKNOWN); 1186 return; 1187 } else { 1188 /* if autopair attempts are more than 1, or not attempted */ 1189 status = BT_STATUS_AUTH_FAILURE; 1190 } 1191 break; 1192 1193 default: 1194 status = BT_STATUS_FAIL; 1195 } 1196 /* Special Handling for HID Devices */ 1197 if (check_cod(&bd_addr, COD_HID_POINTING)) { 1198 /* Remove Device as bonded in nvram as authentication failed */ 1199 BTIF_TRACE_DEBUG("%s(): removing hid pointing device from nvram", 1200 __func__); 1201 btif_storage_remove_bonded_device(&bd_addr); 1202 } 1203 bond_state_changed(status, &bd_addr, state); 1204 } 1205 } 1206 1207 /****************************************************************************** 1208 * 1209 * Function btif_dm_search_devices_evt 1210 * 1211 * Description Executes search devices callback events in btif context 1212 * 1213 * Returns void 1214 * 1215 *****************************************************************************/ 1216 static void btif_dm_search_devices_evt(uint16_t event, char* p_param) { 1217 tBTA_DM_SEARCH* p_search_data; 1218 BTIF_TRACE_EVENT("%s event=%s", __func__, dump_dm_search_event(event)); 1219 1220 switch (event) { 1221 case BTA_DM_DISC_RES_EVT: { 1222 p_search_data = (tBTA_DM_SEARCH*)p_param; 1223 /* Remote name update */ 1224 if (strlen((const char*)p_search_data->disc_res.bd_name)) { 1225 bt_property_t properties[1]; 1226 bt_bdaddr_t bdaddr; 1227 bt_status_t status; 1228 1229 properties[0].type = BT_PROPERTY_BDNAME; 1230 properties[0].val = p_search_data->disc_res.bd_name; 1231 properties[0].len = strlen((char*)p_search_data->disc_res.bd_name); 1232 bdcpy(bdaddr.address, p_search_data->disc_res.bd_addr); 1233 1234 status = 1235 btif_storage_set_remote_device_property(&bdaddr, &properties[0]); 1236 ASSERTC(status == BT_STATUS_SUCCESS, 1237 "failed to save remote device property", status); 1238 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, status, &bdaddr, 1239 1, properties); 1240 } 1241 /* TODO: Services? */ 1242 } break; 1243 1244 case BTA_DM_INQ_RES_EVT: { 1245 /* inquiry result */ 1246 bt_bdname_t bdname; 1247 bt_bdaddr_t bdaddr; 1248 uint8_t remote_name_len; 1249 tBTA_SERVICE_MASK services = 0; 1250 bdstr_t bdstr; 1251 1252 p_search_data = (tBTA_DM_SEARCH*)p_param; 1253 bdcpy(bdaddr.address, p_search_data->inq_res.bd_addr); 1254 1255 BTIF_TRACE_DEBUG("%s() %s device_type = 0x%x\n", __func__, 1256 bdaddr_to_string(&bdaddr, bdstr, sizeof(bdstr)), 1257 p_search_data->inq_res.device_type); 1258 bdname.name[0] = 0; 1259 1260 if (!check_eir_remote_name(p_search_data, bdname.name, &remote_name_len)) 1261 check_cached_remote_name(p_search_data, bdname.name, &remote_name_len); 1262 1263 /* Check EIR for remote name and services */ 1264 if (p_search_data->inq_res.p_eir) { 1265 BTA_GetEirService(p_search_data->inq_res.p_eir, 1266 p_search_data->inq_res.eir_len, &services); 1267 BTIF_TRACE_DEBUG("%s()EIR BTA services = %08X", __func__, 1268 (uint32_t)services); 1269 /* TODO: Get the service list and check to see which uuids we got and 1270 * send it back to the client. */ 1271 } 1272 1273 { 1274 bt_property_t properties[5]; 1275 bt_device_type_t dev_type; 1276 uint32_t num_properties = 0; 1277 bt_status_t status; 1278 int addr_type = 0; 1279 1280 memset(properties, 0, sizeof(properties)); 1281 /* BD_ADDR */ 1282 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1283 BT_PROPERTY_BDADDR, sizeof(bdaddr), &bdaddr); 1284 num_properties++; 1285 /* BD_NAME */ 1286 /* Don't send BDNAME if it is empty */ 1287 if (bdname.name[0]) { 1288 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1289 BT_PROPERTY_BDNAME, 1290 strlen((char*)bdname.name), &bdname); 1291 num_properties++; 1292 } 1293 1294 /* DEV_CLASS */ 1295 uint32_t cod = devclass2uint(p_search_data->inq_res.dev_class); 1296 BTIF_TRACE_DEBUG("%s cod is 0x%06x", __func__, cod); 1297 if (cod != 0) { 1298 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1299 BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), 1300 &cod); 1301 num_properties++; 1302 } 1303 1304 /* DEV_TYPE */ 1305 /* FixMe: Assumption is that bluetooth.h and BTE enums match */ 1306 1307 /* Verify if the device is dual mode in NVRAM */ 1308 int stored_device_type = 0; 1309 if (btif_get_device_type(bdaddr.address, &stored_device_type) && 1310 ((stored_device_type != BT_DEVICE_TYPE_BREDR && 1311 p_search_data->inq_res.device_type == BT_DEVICE_TYPE_BREDR) || 1312 (stored_device_type != BT_DEVICE_TYPE_BLE && 1313 p_search_data->inq_res.device_type == BT_DEVICE_TYPE_BLE))) { 1314 dev_type = (bt_device_type_t)BT_DEVICE_TYPE_DUMO; 1315 } else { 1316 dev_type = (bt_device_type_t)p_search_data->inq_res.device_type; 1317 } 1318 1319 if (p_search_data->inq_res.device_type == BT_DEVICE_TYPE_BLE) 1320 addr_type = p_search_data->inq_res.ble_addr_type; 1321 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1322 BT_PROPERTY_TYPE_OF_DEVICE, sizeof(dev_type), 1323 &dev_type); 1324 num_properties++; 1325 /* RSSI */ 1326 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1327 BT_PROPERTY_REMOTE_RSSI, sizeof(int8_t), 1328 &(p_search_data->inq_res.rssi)); 1329 num_properties++; 1330 1331 status = 1332 btif_storage_add_remote_device(&bdaddr, num_properties, properties); 1333 ASSERTC(status == BT_STATUS_SUCCESS, 1334 "failed to save remote device (inquiry)", status); 1335 status = btif_storage_set_remote_addr_type(&bdaddr, addr_type); 1336 ASSERTC(status == BT_STATUS_SUCCESS, 1337 "failed to save remote addr type (inquiry)", status); 1338 /* Callback to notify upper layer of device */ 1339 HAL_CBACK(bt_hal_cbacks, device_found_cb, num_properties, properties); 1340 } 1341 } break; 1342 1343 case BTA_DM_INQ_CMPL_EVT: { 1344 do_in_bta_thread( 1345 FROM_HERE, 1346 base::Bind(&BTM_BleAdvFilterParamSetup, BTM_BLE_SCAN_COND_DELETE, 0, 1347 nullptr, base::Bind(&bte_scan_filt_param_cfg_evt, 0))); 1348 } break; 1349 case BTA_DM_DISC_CMPL_EVT: { 1350 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1351 BT_DISCOVERY_STOPPED); 1352 } break; 1353 case BTA_DM_SEARCH_CANCEL_CMPL_EVT: { 1354 /* if inquiry is not in progress and we get a cancel event, then 1355 * it means we are done with inquiry, but remote_name fetches are in 1356 * progress 1357 * 1358 * if inquiry is in progress, then we don't want to act on this 1359 * cancel_cmpl_evt 1360 * but instead wait for the cancel_cmpl_evt via the Busy Level 1361 * 1362 */ 1363 if (btif_dm_inquiry_in_progress == false) { 1364 btgatt_filt_param_setup_t adv_filt_param; 1365 memset(&adv_filt_param, 0, sizeof(btgatt_filt_param_setup_t)); 1366 do_in_bta_thread( 1367 FROM_HERE, 1368 base::Bind(&BTM_BleAdvFilterParamSetup, BTM_BLE_SCAN_COND_DELETE, 0, 1369 nullptr, base::Bind(&bte_scan_filt_param_cfg_evt, 0))); 1370 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1371 BT_DISCOVERY_STOPPED); 1372 } 1373 } break; 1374 } 1375 } 1376 1377 /******************************************************************************* 1378 * 1379 * Function btif_dm_search_services_evt 1380 * 1381 * Description Executes search services event in btif context 1382 * 1383 * Returns void 1384 * 1385 ******************************************************************************/ 1386 static void btif_dm_search_services_evt(uint16_t event, char* p_param) { 1387 tBTA_DM_SEARCH* p_data = (tBTA_DM_SEARCH*)p_param; 1388 1389 BTIF_TRACE_EVENT("%s: event = %d", __func__, event); 1390 switch (event) { 1391 case BTA_DM_DISC_RES_EVT: { 1392 bt_property_t prop; 1393 uint32_t i = 0; 1394 bt_bdaddr_t bd_addr; 1395 bt_status_t ret; 1396 1397 bdcpy(bd_addr.address, p_data->disc_res.bd_addr); 1398 1399 BTIF_TRACE_DEBUG("%s:(result=0x%x, services 0x%x)", __func__, 1400 p_data->disc_res.result, p_data->disc_res.services); 1401 if ((p_data->disc_res.result != BTA_SUCCESS) && 1402 (pairing_cb.state == BT_BOND_STATE_BONDING) && 1403 (pairing_cb.sdp_attempts < BTIF_DM_MAX_SDP_ATTEMPTS_AFTER_PAIRING)) { 1404 BTIF_TRACE_WARNING("%s:SDP failed after bonding re-attempting", 1405 __func__); 1406 pairing_cb.sdp_attempts++; 1407 btif_dm_get_remote_services(&bd_addr); 1408 return; 1409 } 1410 prop.type = BT_PROPERTY_UUIDS; 1411 prop.len = 0; 1412 if ((p_data->disc_res.result == BTA_SUCCESS) && 1413 (p_data->disc_res.num_uuids > 0)) { 1414 prop.val = p_data->disc_res.p_uuid_list; 1415 prop.len = p_data->disc_res.num_uuids * MAX_UUID_SIZE; 1416 for (i = 0; i < p_data->disc_res.num_uuids; i++) { 1417 char temp[256]; 1418 uuid_to_string_legacy( 1419 (bt_uuid_t*)(p_data->disc_res.p_uuid_list + (i * MAX_UUID_SIZE)), 1420 temp, sizeof(temp)); 1421 LOG_INFO(LOG_TAG, "%s index:%d uuid:%s", __func__, i, temp); 1422 } 1423 } 1424 1425 /* onUuidChanged requires getBondedDevices to be populated. 1426 ** bond_state_changed needs to be sent prior to remote_device_property 1427 */ 1428 if ((pairing_cb.state == BT_BOND_STATE_BONDING) && 1429 ((bdcmp(p_data->disc_res.bd_addr, pairing_cb.bd_addr) == 0) || 1430 (bdcmp(p_data->disc_res.bd_addr, pairing_cb.static_bdaddr.address) == 1431 0)) && 1432 pairing_cb.sdp_attempts > 0) { 1433 BTIF_TRACE_DEBUG( 1434 "%s Remote Service SDP done. Call bond_state_changed_cb BONDED", 1435 __func__); 1436 pairing_cb.sdp_attempts = 0; 1437 1438 // If bonding occured due to cross-key pairing, send bonding callback 1439 // for static address now 1440 if (bdcmp(p_data->disc_res.bd_addr, pairing_cb.static_bdaddr.address) == 1441 0) 1442 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, 1443 BT_BOND_STATE_BONDING); 1444 1445 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDED); 1446 } 1447 1448 if (p_data->disc_res.num_uuids != 0) { 1449 /* Also write this to the NVRAM */ 1450 ret = btif_storage_set_remote_device_property(&bd_addr, &prop); 1451 ASSERTC(ret == BT_STATUS_SUCCESS, "storing remote services failed", 1452 ret); 1453 /* Send the event to the BTIF */ 1454 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, BT_STATUS_SUCCESS, 1455 &bd_addr, 1, &prop); 1456 } 1457 } break; 1458 1459 case BTA_DM_DISC_CMPL_EVT: 1460 /* fixme */ 1461 break; 1462 1463 case BTA_DM_SEARCH_CANCEL_CMPL_EVT: 1464 /* no-op */ 1465 break; 1466 1467 case BTA_DM_DISC_BLE_RES_EVT: { 1468 BTIF_TRACE_DEBUG("%s:, services 0x%x)", __func__, 1469 p_data->disc_ble_res.service.uu.uuid16); 1470 bt_uuid_t uuid; 1471 int i = 0; 1472 int j = 15; 1473 int num_properties = 0; 1474 if (p_data->disc_ble_res.service.uu.uuid16 == UUID_SERVCLASS_LE_HID) { 1475 BTIF_TRACE_DEBUG("%s: Found HOGP UUID", __func__); 1476 bt_property_t prop[2]; 1477 bt_bdaddr_t bd_addr; 1478 char temp[256]; 1479 bt_status_t ret; 1480 1481 bta_gatt_convert_uuid16_to_uuid128( 1482 uuid.uu, p_data->disc_ble_res.service.uu.uuid16); 1483 1484 while (i < j) { 1485 unsigned char c = uuid.uu[j]; 1486 uuid.uu[j] = uuid.uu[i]; 1487 uuid.uu[i] = c; 1488 i++; 1489 j--; 1490 } 1491 1492 uuid_to_string_legacy(&uuid, temp, sizeof(temp)); 1493 LOG_INFO(LOG_TAG, "%s uuid:%s", __func__, temp); 1494 1495 bdcpy(bd_addr.address, p_data->disc_ble_res.bd_addr); 1496 prop[0].type = BT_PROPERTY_UUIDS; 1497 prop[0].val = uuid.uu; 1498 prop[0].len = MAX_UUID_SIZE; 1499 1500 /* Also write this to the NVRAM */ 1501 ret = btif_storage_set_remote_device_property(&bd_addr, &prop[0]); 1502 ASSERTC(ret == BT_STATUS_SUCCESS, "storing remote services failed", 1503 ret); 1504 num_properties++; 1505 1506 /* Remote name update */ 1507 if (strnlen((const char*)p_data->disc_ble_res.bd_name, BD_NAME_LEN)) { 1508 prop[1].type = BT_PROPERTY_BDNAME; 1509 prop[1].val = p_data->disc_ble_res.bd_name; 1510 prop[1].len = 1511 strnlen((char*)p_data->disc_ble_res.bd_name, BD_NAME_LEN); 1512 1513 ret = btif_storage_set_remote_device_property(&bd_addr, &prop[1]); 1514 ASSERTC(ret == BT_STATUS_SUCCESS, 1515 "failed to save remote device property", ret); 1516 num_properties++; 1517 } 1518 1519 /* Send the event to the BTIF */ 1520 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, BT_STATUS_SUCCESS, 1521 &bd_addr, num_properties, prop); 1522 } 1523 } break; 1524 1525 default: { ASSERTC(0, "unhandled search services event", event); } break; 1526 } 1527 } 1528 1529 /******************************************************************************* 1530 * 1531 * Function btif_dm_remote_service_record_evt 1532 * 1533 * Description Executes search service record event in btif context 1534 * 1535 * Returns void 1536 * 1537 ******************************************************************************/ 1538 static void btif_dm_remote_service_record_evt(uint16_t event, char* p_param) { 1539 tBTA_DM_SEARCH* p_data = (tBTA_DM_SEARCH*)p_param; 1540 1541 BTIF_TRACE_EVENT("%s: event = %d", __func__, event); 1542 switch (event) { 1543 case BTA_DM_DISC_RES_EVT: { 1544 bt_service_record_t rec; 1545 bt_property_t prop; 1546 bt_bdaddr_t bd_addr; 1547 1548 memset(&rec, 0, sizeof(bt_service_record_t)); 1549 bdcpy(bd_addr.address, p_data->disc_res.bd_addr); 1550 1551 BTIF_TRACE_DEBUG("%s:(result=0x%x, services 0x%x)", __func__, 1552 p_data->disc_res.result, p_data->disc_res.services); 1553 prop.type = BT_PROPERTY_SERVICE_RECORD; 1554 prop.val = (void*)&rec; 1555 prop.len = sizeof(rec); 1556 1557 /* disc_res.result is overloaded with SCN. Cannot check result */ 1558 p_data->disc_res.services &= ~BTA_USER_SERVICE_MASK; 1559 /* TODO: Get the UUID as well */ 1560 rec.channel = p_data->disc_res.result - 3; 1561 /* TODO: Need to get the service name using p_raw_data */ 1562 rec.name[0] = 0; 1563 1564 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, BT_STATUS_SUCCESS, 1565 &bd_addr, 1, &prop); 1566 } break; 1567 1568 default: { 1569 ASSERTC(0, "unhandled remote service record event", event); 1570 } break; 1571 } 1572 } 1573 1574 /******************************************************************************* 1575 * 1576 * Function btif_dm_upstreams_cback 1577 * 1578 * Description Executes UPSTREAMS events in btif context 1579 * 1580 * Returns void 1581 * 1582 ******************************************************************************/ 1583 static void btif_dm_upstreams_evt(uint16_t event, char* p_param) { 1584 tBTA_DM_SEC* p_data = (tBTA_DM_SEC*)p_param; 1585 tBTA_SERVICE_MASK service_mask; 1586 uint32_t i; 1587 bt_bdaddr_t bd_addr; 1588 1589 BTIF_TRACE_EVENT("%s: ev: %s", __func__, dump_dm_event(event)); 1590 1591 switch (event) { 1592 case BTA_DM_ENABLE_EVT: { 1593 BD_NAME bdname; 1594 bt_status_t status; 1595 bt_property_t prop; 1596 prop.type = BT_PROPERTY_BDNAME; 1597 prop.len = BD_NAME_LEN; 1598 prop.val = (void*)bdname; 1599 1600 status = btif_storage_get_adapter_property(&prop); 1601 if (status == BT_STATUS_SUCCESS) { 1602 /* A name exists in the storage. Make this the device name */ 1603 BTA_DmSetDeviceName((char*)prop.val); 1604 } else { 1605 /* Storage does not have a name yet. 1606 * Use the default name and write it to the chip 1607 */ 1608 BTA_DmSetDeviceName(btif_get_default_local_name()); 1609 } 1610 1611 /* Enable local privacy */ 1612 BTA_DmBleConfigLocalPrivacy(BLE_LOCAL_PRIVACY_ENABLED); 1613 1614 /* for each of the enabled services in the mask, trigger the profile 1615 * enable */ 1616 service_mask = btif_get_enabled_services_mask(); 1617 for (i = 0; i <= BTA_MAX_SERVICE_ID; i++) { 1618 if (service_mask & 1619 (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(i))) { 1620 btif_in_execute_service_request(i, true); 1621 } 1622 } 1623 /* clear control blocks */ 1624 memset(&pairing_cb, 0, sizeof(btif_dm_pairing_cb_t)); 1625 pairing_cb.bond_type = BOND_TYPE_PERSISTENT; 1626 1627 /* This function will also trigger the adapter_properties_cb 1628 ** and bonded_devices_info_cb 1629 */ 1630 btif_storage_load_bonded_devices(); 1631 1632 btif_enable_bluetooth_evt(p_data->enable.status); 1633 } break; 1634 1635 case BTA_DM_DISABLE_EVT: 1636 /* for each of the enabled services in the mask, trigger the profile 1637 * disable */ 1638 service_mask = btif_get_enabled_services_mask(); 1639 for (i = 0; i <= BTA_MAX_SERVICE_ID; i++) { 1640 if (service_mask & 1641 (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(i))) { 1642 btif_in_execute_service_request(i, false); 1643 } 1644 } 1645 btif_disable_bluetooth_evt(); 1646 break; 1647 1648 case BTA_DM_PIN_REQ_EVT: 1649 btif_dm_pin_req_evt(&p_data->pin_req); 1650 break; 1651 1652 case BTA_DM_AUTH_CMPL_EVT: 1653 btif_dm_auth_cmpl_evt(&p_data->auth_cmpl); 1654 break; 1655 1656 case BTA_DM_BOND_CANCEL_CMPL_EVT: 1657 if (pairing_cb.state == BT_BOND_STATE_BONDING) { 1658 bdcpy(bd_addr.address, pairing_cb.bd_addr); 1659 btm_set_bond_type_dev(pairing_cb.bd_addr, BOND_TYPE_UNKNOWN); 1660 bond_state_changed((bt_status_t)p_data->bond_cancel_cmpl.result, 1661 &bd_addr, BT_BOND_STATE_NONE); 1662 } 1663 break; 1664 1665 case BTA_DM_SP_CFM_REQ_EVT: 1666 btif_dm_ssp_cfm_req_evt(&p_data->cfm_req); 1667 break; 1668 case BTA_DM_SP_KEY_NOTIF_EVT: 1669 btif_dm_ssp_key_notif_evt(&p_data->key_notif); 1670 break; 1671 1672 case BTA_DM_DEV_UNPAIRED_EVT: 1673 bdcpy(bd_addr.address, p_data->link_down.bd_addr); 1674 btm_set_bond_type_dev(p_data->link_down.bd_addr, BOND_TYPE_UNKNOWN); 1675 1676 /*special handling for HID devices */ 1677 #if (defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == true)) 1678 btif_hh_remove_device(bd_addr); 1679 #endif 1680 #if (defined(BTA_HD_INCLUDED) && (BTA_HD_INCLUDED == TRUE)) 1681 btif_hd_remove_device(bd_addr); 1682 #endif 1683 btif_storage_remove_bonded_device(&bd_addr); 1684 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_NONE); 1685 break; 1686 1687 case BTA_DM_BUSY_LEVEL_EVT: { 1688 if (p_data->busy_level.level_flags & BTM_BL_INQUIRY_PAGING_MASK) { 1689 if (p_data->busy_level.level_flags == BTM_BL_INQUIRY_STARTED) { 1690 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1691 BT_DISCOVERY_STARTED); 1692 btif_dm_inquiry_in_progress = true; 1693 } else if (p_data->busy_level.level_flags == BTM_BL_INQUIRY_CANCELLED) { 1694 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1695 BT_DISCOVERY_STOPPED); 1696 btif_dm_inquiry_in_progress = false; 1697 } else if (p_data->busy_level.level_flags == BTM_BL_INQUIRY_COMPLETE) { 1698 btif_dm_inquiry_in_progress = false; 1699 } 1700 } 1701 } break; 1702 1703 case BTA_DM_LINK_UP_EVT: 1704 bdcpy(bd_addr.address, p_data->link_up.bd_addr); 1705 BTIF_TRACE_DEBUG("BTA_DM_LINK_UP_EVT. Sending BT_ACL_STATE_CONNECTED"); 1706 1707 btif_update_remote_version_property(&bd_addr); 1708 1709 HAL_CBACK(bt_hal_cbacks, acl_state_changed_cb, BT_STATUS_SUCCESS, 1710 &bd_addr, BT_ACL_STATE_CONNECTED); 1711 break; 1712 1713 case BTA_DM_LINK_DOWN_EVT: 1714 bdcpy(bd_addr.address, p_data->link_down.bd_addr); 1715 btm_set_bond_type_dev(p_data->link_down.bd_addr, BOND_TYPE_UNKNOWN); 1716 btif_av_move_idle(bd_addr); 1717 BTIF_TRACE_DEBUG( 1718 "BTA_DM_LINK_DOWN_EVT. Sending BT_ACL_STATE_DISCONNECTED"); 1719 HAL_CBACK(bt_hal_cbacks, acl_state_changed_cb, BT_STATUS_SUCCESS, 1720 &bd_addr, BT_ACL_STATE_DISCONNECTED); 1721 break; 1722 1723 case BTA_DM_HW_ERROR_EVT: 1724 BTIF_TRACE_ERROR("Received H/W Error. "); 1725 /* Flush storage data */ 1726 btif_config_flush(); 1727 usleep(100000); /* 100milliseconds */ 1728 /* Killing the process to force a restart as part of fault tolerance */ 1729 kill(getpid(), SIGKILL); 1730 break; 1731 1732 case BTA_DM_BLE_KEY_EVT: 1733 BTIF_TRACE_DEBUG("BTA_DM_BLE_KEY_EVT key_type=0x%02x ", 1734 p_data->ble_key.key_type); 1735 1736 /* If this pairing is by-product of local initiated GATT client Read or 1737 Write, 1738 BTA would not have sent BTA_DM_BLE_SEC_REQ_EVT event and Bond state would 1739 not 1740 have setup properly. Setup pairing_cb and notify App about Bonding state 1741 now*/ 1742 if (pairing_cb.state != BT_BOND_STATE_BONDING) { 1743 BTIF_TRACE_DEBUG( 1744 "Bond state not sent to App so far.Notify the app now"); 1745 bond_state_changed(BT_STATUS_SUCCESS, 1746 (bt_bdaddr_t*)p_data->ble_key.bd_addr, 1747 BT_BOND_STATE_BONDING); 1748 } else if (memcmp(pairing_cb.bd_addr, p_data->ble_key.bd_addr, 1749 BD_ADDR_LEN) != 0) { 1750 BTIF_TRACE_ERROR("BD mismatch discard BLE key_type=%d ", 1751 p_data->ble_key.key_type); 1752 break; 1753 } 1754 1755 switch (p_data->ble_key.key_type) { 1756 case BTA_LE_KEY_PENC: 1757 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_PENC"); 1758 pairing_cb.ble.is_penc_key_rcvd = true; 1759 pairing_cb.ble.penc_key = p_data->ble_key.p_key_value->penc_key; 1760 break; 1761 1762 case BTA_LE_KEY_PID: 1763 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_PID"); 1764 pairing_cb.ble.is_pid_key_rcvd = true; 1765 pairing_cb.ble.pid_key = p_data->ble_key.p_key_value->pid_key; 1766 break; 1767 1768 case BTA_LE_KEY_PCSRK: 1769 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_PCSRK"); 1770 pairing_cb.ble.is_pcsrk_key_rcvd = true; 1771 pairing_cb.ble.pcsrk_key = p_data->ble_key.p_key_value->pcsrk_key; 1772 break; 1773 1774 case BTA_LE_KEY_LENC: 1775 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_LENC"); 1776 pairing_cb.ble.is_lenc_key_rcvd = true; 1777 pairing_cb.ble.lenc_key = p_data->ble_key.p_key_value->lenc_key; 1778 break; 1779 1780 case BTA_LE_KEY_LCSRK: 1781 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_LCSRK"); 1782 pairing_cb.ble.is_lcsrk_key_rcvd = true; 1783 pairing_cb.ble.lcsrk_key = p_data->ble_key.p_key_value->lcsrk_key; 1784 break; 1785 1786 case BTA_LE_KEY_LID: 1787 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_LID"); 1788 pairing_cb.ble.is_lidk_key_rcvd = true; 1789 break; 1790 1791 default: 1792 BTIF_TRACE_ERROR("unknown BLE key type (0x%02x)", 1793 p_data->ble_key.key_type); 1794 break; 1795 } 1796 break; 1797 case BTA_DM_BLE_SEC_REQ_EVT: 1798 BTIF_TRACE_DEBUG("BTA_DM_BLE_SEC_REQ_EVT. "); 1799 btif_dm_ble_sec_req_evt(&p_data->ble_req); 1800 break; 1801 case BTA_DM_BLE_PASSKEY_NOTIF_EVT: 1802 BTIF_TRACE_DEBUG("BTA_DM_BLE_PASSKEY_NOTIF_EVT. "); 1803 btif_dm_ble_key_notif_evt(&p_data->key_notif); 1804 break; 1805 case BTA_DM_BLE_PASSKEY_REQ_EVT: 1806 BTIF_TRACE_DEBUG("BTA_DM_BLE_PASSKEY_REQ_EVT. "); 1807 btif_dm_ble_passkey_req_evt(&p_data->pin_req); 1808 break; 1809 case BTA_DM_BLE_NC_REQ_EVT: 1810 BTIF_TRACE_DEBUG("BTA_DM_BLE_PASSKEY_REQ_EVT. "); 1811 btif_dm_ble_key_nc_req_evt(&p_data->key_notif); 1812 break; 1813 case BTA_DM_BLE_OOB_REQ_EVT: 1814 BTIF_TRACE_DEBUG("BTA_DM_BLE_OOB_REQ_EVT. "); 1815 btif_dm_ble_oob_req_evt(&p_data->rmt_oob); 1816 break; 1817 case BTA_DM_BLE_SC_OOB_REQ_EVT: 1818 BTIF_TRACE_DEBUG("BTA_DM_BLE_SC_OOB_REQ_EVT. "); 1819 btif_dm_ble_sc_oob_req_evt(&p_data->rmt_oob); 1820 break; 1821 case BTA_DM_BLE_LOCAL_IR_EVT: 1822 BTIF_TRACE_DEBUG("BTA_DM_BLE_LOCAL_IR_EVT. "); 1823 ble_local_key_cb.is_id_keys_rcvd = true; 1824 memcpy(&ble_local_key_cb.id_keys.irk[0], &p_data->ble_id_keys.irk[0], 1825 sizeof(BT_OCTET16)); 1826 memcpy(&ble_local_key_cb.id_keys.ir[0], &p_data->ble_id_keys.ir[0], 1827 sizeof(BT_OCTET16)); 1828 memcpy(&ble_local_key_cb.id_keys.dhk[0], &p_data->ble_id_keys.dhk[0], 1829 sizeof(BT_OCTET16)); 1830 btif_storage_add_ble_local_key((char*)&ble_local_key_cb.id_keys.irk[0], 1831 BTIF_DM_LE_LOCAL_KEY_IRK, BT_OCTET16_LEN); 1832 btif_storage_add_ble_local_key((char*)&ble_local_key_cb.id_keys.ir[0], 1833 BTIF_DM_LE_LOCAL_KEY_IR, BT_OCTET16_LEN); 1834 btif_storage_add_ble_local_key((char*)&ble_local_key_cb.id_keys.dhk[0], 1835 BTIF_DM_LE_LOCAL_KEY_DHK, BT_OCTET16_LEN); 1836 break; 1837 case BTA_DM_BLE_LOCAL_ER_EVT: 1838 BTIF_TRACE_DEBUG("BTA_DM_BLE_LOCAL_ER_EVT. "); 1839 ble_local_key_cb.is_er_rcvd = true; 1840 memcpy(&ble_local_key_cb.er[0], &p_data->ble_er[0], sizeof(BT_OCTET16)); 1841 btif_storage_add_ble_local_key((char*)&ble_local_key_cb.er[0], 1842 BTIF_DM_LE_LOCAL_KEY_ER, BT_OCTET16_LEN); 1843 break; 1844 1845 case BTA_DM_BLE_AUTH_CMPL_EVT: 1846 BTIF_TRACE_DEBUG("BTA_DM_BLE_AUTH_CMPL_EVT. "); 1847 btif_dm_ble_auth_cmpl_evt(&p_data->auth_cmpl); 1848 break; 1849 1850 case BTA_DM_LE_FEATURES_READ: { 1851 tBTM_BLE_VSC_CB cmn_vsc_cb; 1852 bt_local_le_features_t local_le_features; 1853 char buf[512]; 1854 bt_property_t prop; 1855 prop.type = BT_PROPERTY_LOCAL_LE_FEATURES; 1856 prop.val = (void*)buf; 1857 prop.len = sizeof(buf); 1858 1859 /* LE features are not stored in storage. Should be retrived from stack */ 1860 BTM_BleGetVendorCapabilities(&cmn_vsc_cb); 1861 local_le_features.local_privacy_enabled = BTM_BleLocalPrivacyEnabled(); 1862 1863 prop.len = sizeof(bt_local_le_features_t); 1864 if (cmn_vsc_cb.filter_support == 1) 1865 local_le_features.max_adv_filter_supported = cmn_vsc_cb.max_filter; 1866 else 1867 local_le_features.max_adv_filter_supported = 0; 1868 local_le_features.max_adv_instance = cmn_vsc_cb.adv_inst_max; 1869 local_le_features.max_irk_list_size = cmn_vsc_cb.max_irk_list_sz; 1870 local_le_features.rpa_offload_supported = cmn_vsc_cb.rpa_offloading; 1871 local_le_features.activity_energy_info_supported = 1872 cmn_vsc_cb.energy_support; 1873 local_le_features.scan_result_storage_size = 1874 cmn_vsc_cb.tot_scan_results_strg; 1875 local_le_features.version_supported = cmn_vsc_cb.version_supported; 1876 local_le_features.total_trackable_advertisers = 1877 cmn_vsc_cb.total_trackable_advertisers; 1878 1879 local_le_features.extended_scan_support = 1880 cmn_vsc_cb.extended_scan_support > 0; 1881 local_le_features.debug_logging_supported = 1882 cmn_vsc_cb.debug_logging_supported > 0; 1883 1884 const controller_t* controller = controller_get_interface(); 1885 1886 local_le_features.le_2m_phy_supported = controller->supports_ble_2m_phy(); 1887 local_le_features.le_coded_phy_supported = 1888 controller->supports_ble_coded_phy(); 1889 local_le_features.le_extended_advertising_supported = 1890 controller->supports_ble_extended_advertising(); 1891 local_le_features.le_periodic_advertising_supported = 1892 controller->supports_ble_periodic_advertising(); 1893 local_le_features.le_maximum_advertising_data_length = 1894 controller->get_ble_maxium_advertising_data_length(); 1895 1896 memcpy(prop.val, &local_le_features, prop.len); 1897 HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, BT_STATUS_SUCCESS, 1, 1898 &prop); 1899 break; 1900 } 1901 1902 case BTA_DM_ENER_INFO_READ: { 1903 btif_activity_energy_info_cb_t* p_ener_data = 1904 (btif_activity_energy_info_cb_t*)p_param; 1905 bt_activity_energy_info energy_info; 1906 energy_info.status = p_ener_data->status; 1907 energy_info.ctrl_state = p_ener_data->ctrl_state; 1908 energy_info.rx_time = p_ener_data->rx_time; 1909 energy_info.tx_time = p_ener_data->tx_time; 1910 energy_info.idle_time = p_ener_data->idle_time; 1911 energy_info.energy_used = p_ener_data->energy_used; 1912 1913 bt_uid_traffic_t* data = uid_set_read_and_clear(uid_set); 1914 HAL_CBACK(bt_hal_cbacks, energy_info_cb, &energy_info, data); 1915 osi_free(data); 1916 break; 1917 } 1918 1919 case BTA_DM_AUTHORIZE_EVT: 1920 case BTA_DM_SIG_STRENGTH_EVT: 1921 case BTA_DM_SP_RMT_OOB_EVT: 1922 case BTA_DM_SP_KEYPRESS_EVT: 1923 case BTA_DM_ROLE_CHG_EVT: 1924 1925 default: 1926 BTIF_TRACE_WARNING("btif_dm_cback : unhandled event (%d)", event); 1927 break; 1928 } 1929 1930 btif_dm_data_free(event, p_data); 1931 } 1932 1933 /******************************************************************************* 1934 * 1935 * Function btif_dm_generic_evt 1936 * 1937 * Description Executes non-BTA upstream events in BTIF context 1938 * 1939 * Returns void 1940 * 1941 ******************************************************************************/ 1942 static void btif_dm_generic_evt(uint16_t event, char* p_param) { 1943 BTIF_TRACE_EVENT("%s: event=%d", __func__, event); 1944 switch (event) { 1945 case BTIF_DM_CB_DISCOVERY_STARTED: { 1946 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1947 BT_DISCOVERY_STARTED); 1948 } break; 1949 1950 case BTIF_DM_CB_CREATE_BOND: { 1951 pairing_cb.timeout_retries = NUM_TIMEOUT_RETRIES; 1952 btif_dm_create_bond_cb_t* create_bond_cb = 1953 (btif_dm_create_bond_cb_t*)p_param; 1954 btif_dm_cb_create_bond(&create_bond_cb->bdaddr, 1955 create_bond_cb->transport); 1956 } break; 1957 1958 case BTIF_DM_CB_REMOVE_BOND: { 1959 btif_dm_cb_remove_bond((bt_bdaddr_t*)p_param); 1960 } break; 1961 1962 case BTIF_DM_CB_HID_REMOTE_NAME: { 1963 btif_dm_cb_hid_remote_name((tBTM_REMOTE_DEV_NAME*)p_param); 1964 } break; 1965 1966 case BTIF_DM_CB_BOND_STATE_BONDING: { 1967 bond_state_changed(BT_STATUS_SUCCESS, (bt_bdaddr_t*)p_param, 1968 BT_BOND_STATE_BONDING); 1969 } break; 1970 case BTIF_DM_CB_LE_TX_TEST: 1971 case BTIF_DM_CB_LE_RX_TEST: { 1972 uint8_t status; 1973 STREAM_TO_UINT8(status, p_param); 1974 HAL_CBACK(bt_hal_cbacks, le_test_mode_cb, 1975 (status == 0) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL, 0); 1976 } break; 1977 case BTIF_DM_CB_LE_TEST_END: { 1978 uint8_t status; 1979 uint16_t count = 0; 1980 STREAM_TO_UINT8(status, p_param); 1981 if (status == 0) STREAM_TO_UINT16(count, p_param); 1982 HAL_CBACK(bt_hal_cbacks, le_test_mode_cb, 1983 (status == 0) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL, count); 1984 } break; 1985 default: { 1986 BTIF_TRACE_WARNING("%s : Unknown event 0x%x", __func__, event); 1987 } break; 1988 } 1989 } 1990 1991 /******************************************************************************* 1992 * 1993 * Function bte_dm_evt 1994 * 1995 * Description Switches context from BTE to BTIF for all DM events 1996 * 1997 * Returns void 1998 * 1999 ******************************************************************************/ 2000 2001 void bte_dm_evt(tBTA_DM_SEC_EVT event, tBTA_DM_SEC* p_data) { 2002 /* switch context to btif task context (copy full union size for convenience) 2003 */ 2004 bt_status_t status = btif_transfer_context( 2005 btif_dm_upstreams_evt, (uint16_t)event, (char*)p_data, 2006 sizeof(tBTA_DM_SEC), btif_dm_data_copy); 2007 2008 /* catch any failed context transfers */ 2009 ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status); 2010 } 2011 2012 /******************************************************************************* 2013 * 2014 * Function bte_search_devices_evt 2015 * 2016 * Description Switches context from BTE to BTIF for DM search events 2017 * 2018 * Returns void 2019 * 2020 ******************************************************************************/ 2021 static void bte_search_devices_evt(tBTA_DM_SEARCH_EVT event, 2022 tBTA_DM_SEARCH* p_data) { 2023 uint16_t param_len = 0; 2024 2025 if (p_data) param_len += sizeof(tBTA_DM_SEARCH); 2026 /* Allocate buffer to hold the pointers (deep copy). The pointers will point 2027 * to the end of the tBTA_DM_SEARCH */ 2028 switch (event) { 2029 case BTA_DM_INQ_RES_EVT: { 2030 if (p_data->inq_res.p_eir) param_len += HCI_EXT_INQ_RESPONSE_LEN; 2031 } break; 2032 2033 case BTA_DM_DISC_RES_EVT: { 2034 if (p_data->disc_res.raw_data_size && p_data->disc_res.p_raw_data) 2035 param_len += p_data->disc_res.raw_data_size; 2036 } break; 2037 } 2038 BTIF_TRACE_DEBUG("%s event=%s param_len=%d", __func__, 2039 dump_dm_search_event(event), param_len); 2040 2041 /* if remote name is available in EIR, set teh flag so that stack doesnt 2042 * trigger RNR */ 2043 if (event == BTA_DM_INQ_RES_EVT) 2044 p_data->inq_res.remt_name_not_required = 2045 check_eir_remote_name(p_data, NULL, NULL); 2046 2047 btif_transfer_context( 2048 btif_dm_search_devices_evt, (uint16_t)event, (char*)p_data, param_len, 2049 (param_len > sizeof(tBTA_DM_SEARCH)) ? search_devices_copy_cb : NULL); 2050 } 2051 2052 /******************************************************************************* 2053 * 2054 * Function bte_dm_search_services_evt 2055 * 2056 * Description Switches context from BTE to BTIF for DM search services 2057 * event 2058 * 2059 * Returns void 2060 * 2061 ******************************************************************************/ 2062 static void bte_dm_search_services_evt(tBTA_DM_SEARCH_EVT event, 2063 tBTA_DM_SEARCH* p_data) { 2064 uint16_t param_len = 0; 2065 if (p_data) param_len += sizeof(tBTA_DM_SEARCH); 2066 switch (event) { 2067 case BTA_DM_DISC_RES_EVT: { 2068 if ((p_data->disc_res.result == BTA_SUCCESS) && 2069 (p_data->disc_res.num_uuids > 0)) { 2070 param_len += (p_data->disc_res.num_uuids * MAX_UUID_SIZE); 2071 } 2072 } break; 2073 } 2074 /* TODO: The only other member that needs a deep copy is the p_raw_data. But 2075 * not sure 2076 * if raw_data is needed. */ 2077 btif_transfer_context( 2078 btif_dm_search_services_evt, event, (char*)p_data, param_len, 2079 (param_len > sizeof(tBTA_DM_SEARCH)) ? search_services_copy_cb : NULL); 2080 } 2081 2082 /******************************************************************************* 2083 * 2084 * Function bte_dm_remote_service_record_evt 2085 * 2086 * Description Switches context from BTE to BTIF for DM search service 2087 * record event 2088 * 2089 * Returns void 2090 * 2091 ******************************************************************************/ 2092 static void bte_dm_remote_service_record_evt(tBTA_DM_SEARCH_EVT event, 2093 tBTA_DM_SEARCH* p_data) { 2094 /* TODO: The only member that needs a deep copy is the p_raw_data. But not 2095 * sure yet if this is needed. */ 2096 btif_transfer_context(btif_dm_remote_service_record_evt, event, (char*)p_data, 2097 sizeof(tBTA_DM_SEARCH), NULL); 2098 } 2099 2100 /******************************************************************************* 2101 * 2102 * Function bta_energy_info_cb 2103 * 2104 * Description Switches context from BTE to BTIF for DM energy info event 2105 * 2106 * Returns void 2107 * 2108 ******************************************************************************/ 2109 static void bta_energy_info_cb(tBTA_DM_BLE_TX_TIME_MS tx_time, 2110 tBTA_DM_BLE_RX_TIME_MS rx_time, 2111 tBTA_DM_BLE_IDLE_TIME_MS idle_time, 2112 tBTA_DM_BLE_ENERGY_USED energy_used, 2113 tBTA_DM_CONTRL_STATE ctrl_state, 2114 tBTA_STATUS status) { 2115 BTIF_TRACE_DEBUG( 2116 "energy_info_cb-Status:%d,state=%d,tx_t=%ld, rx_t=%ld, " 2117 "idle_time=%ld,used=%ld", 2118 status, ctrl_state, tx_time, rx_time, idle_time, energy_used); 2119 2120 btif_activity_energy_info_cb_t btif_cb; 2121 btif_cb.status = status; 2122 btif_cb.ctrl_state = ctrl_state; 2123 btif_cb.tx_time = (uint64_t)tx_time; 2124 btif_cb.rx_time = (uint64_t)rx_time; 2125 btif_cb.idle_time = (uint64_t)idle_time; 2126 btif_cb.energy_used = (uint64_t)energy_used; 2127 btif_transfer_context(btif_dm_upstreams_evt, BTA_DM_ENER_INFO_READ, 2128 (char*)&btif_cb, sizeof(btif_activity_energy_info_cb_t), 2129 NULL); 2130 } 2131 2132 /* Scan filter param config event */ 2133 static void bte_scan_filt_param_cfg_evt(uint8_t ref_value, uint8_t avbl_space, 2134 uint8_t action_type, uint8_t status) { 2135 /* This event occurs on calling BTA_DmBleCfgFilterCondition internally, 2136 ** and that is why there is no HAL callback 2137 */ 2138 if (BTA_SUCCESS != status) { 2139 BTIF_TRACE_ERROR("%s, %d", __func__, status); 2140 } else { 2141 BTIF_TRACE_DEBUG("%s", __func__); 2142 } 2143 } 2144 2145 /***************************************************************************** 2146 * 2147 * btif api functions (no context switch) 2148 * 2149 ****************************************************************************/ 2150 2151 /******************************************************************************* 2152 * 2153 * Function btif_dm_start_discovery 2154 * 2155 * Description Start device discovery/inquiry 2156 * 2157 * Returns bt_status_t 2158 * 2159 ******************************************************************************/ 2160 bt_status_t btif_dm_start_discovery(void) { 2161 tBTA_DM_INQ inq_params; 2162 tBTA_SERVICE_MASK services = 0; 2163 2164 BTIF_TRACE_EVENT("%s", __func__); 2165 2166 /* Cleanup anything remaining on index 0 */ 2167 do_in_bta_thread( 2168 FROM_HERE, 2169 base::Bind(&BTM_BleAdvFilterParamSetup, BTM_BLE_SCAN_COND_DELETE, 0, 2170 nullptr, base::Bind(&bte_scan_filt_param_cfg_evt, 0))); 2171 2172 auto adv_filt_param = std::make_unique<btgatt_filt_param_setup_t>(); 2173 /* Add an allow-all filter on index 0*/ 2174 adv_filt_param->dely_mode = IMMEDIATE_DELY_MODE; 2175 adv_filt_param->feat_seln = ALLOW_ALL_FILTER; 2176 adv_filt_param->filt_logic_type = BTA_DM_BLE_PF_FILT_LOGIC_OR; 2177 adv_filt_param->list_logic_type = BTA_DM_BLE_PF_LIST_LOGIC_OR; 2178 adv_filt_param->rssi_low_thres = LOWEST_RSSI_VALUE; 2179 adv_filt_param->rssi_high_thres = LOWEST_RSSI_VALUE; 2180 do_in_bta_thread( 2181 FROM_HERE, base::Bind(&BTM_BleAdvFilterParamSetup, BTM_BLE_SCAN_COND_ADD, 2182 0, base::Passed(&adv_filt_param), 2183 base::Bind(&bte_scan_filt_param_cfg_evt, 0))); 2184 2185 /* TODO: Do we need to handle multiple inquiries at the same time? */ 2186 2187 /* Set inquiry params and call API */ 2188 inq_params.mode = BTA_DM_GENERAL_INQUIRY | BTA_BLE_GENERAL_INQUIRY; 2189 #if (BTA_HOST_INTERLEAVE_SEARCH == TRUE) 2190 inq_params.intl_duration[0] = BTIF_DM_INTERLEAVE_DURATION_BR_ONE; 2191 inq_params.intl_duration[1] = BTIF_DM_INTERLEAVE_DURATION_LE_ONE; 2192 inq_params.intl_duration[2] = BTIF_DM_INTERLEAVE_DURATION_BR_TWO; 2193 inq_params.intl_duration[3] = BTIF_DM_INTERLEAVE_DURATION_LE_TWO; 2194 #endif 2195 inq_params.duration = BTIF_DM_DEFAULT_INQ_MAX_DURATION; 2196 2197 inq_params.max_resps = BTIF_DM_DEFAULT_INQ_MAX_RESULTS; 2198 inq_params.report_dup = true; 2199 2200 inq_params.filter_type = BTA_DM_INQ_CLR; 2201 /* TODO: Filter device by BDA needs to be implemented here */ 2202 2203 /* Will be enabled to true once inquiry busy level has been received */ 2204 btif_dm_inquiry_in_progress = false; 2205 /* find nearby devices */ 2206 BTA_DmSearch(&inq_params, services, bte_search_devices_evt); 2207 2208 return BT_STATUS_SUCCESS; 2209 } 2210 2211 /******************************************************************************* 2212 * 2213 * Function btif_dm_cancel_discovery 2214 * 2215 * Description Cancels search 2216 * 2217 * Returns bt_status_t 2218 * 2219 ******************************************************************************/ 2220 bt_status_t btif_dm_cancel_discovery(void) { 2221 BTIF_TRACE_EVENT("%s", __func__); 2222 BTA_DmSearchCancel(); 2223 return BT_STATUS_SUCCESS; 2224 } 2225 2226 /******************************************************************************* 2227 * 2228 * Function btif_dm_create_bond 2229 * 2230 * Description Initiate bonding with the specified device 2231 * 2232 * Returns bt_status_t 2233 * 2234 ******************************************************************************/ 2235 bt_status_t btif_dm_create_bond(const bt_bdaddr_t* bd_addr, int transport) { 2236 btif_dm_create_bond_cb_t create_bond_cb; 2237 create_bond_cb.transport = transport; 2238 bdcpy(create_bond_cb.bdaddr.address, bd_addr->address); 2239 2240 bdstr_t bdstr; 2241 BTIF_TRACE_EVENT("%s: bd_addr=%s, transport=%d", __func__, 2242 bdaddr_to_string(bd_addr, bdstr, sizeof(bdstr)), transport); 2243 if (pairing_cb.state != BT_BOND_STATE_NONE) return BT_STATUS_BUSY; 2244 2245 btif_stats_add_bond_event(bd_addr, BTIF_DM_FUNC_CREATE_BOND, 2246 pairing_cb.state); 2247 2248 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_CREATE_BOND, 2249 (char*)&create_bond_cb, 2250 sizeof(btif_dm_create_bond_cb_t), NULL); 2251 2252 return BT_STATUS_SUCCESS; 2253 } 2254 2255 /******************************************************************************* 2256 * 2257 * Function btif_dm_create_bond_out_of_band 2258 * 2259 * Description Initiate bonding with the specified device using out of band 2260 * data 2261 * 2262 * Returns bt_status_t 2263 * 2264 ******************************************************************************/ 2265 bt_status_t btif_dm_create_bond_out_of_band( 2266 const bt_bdaddr_t* bd_addr, int transport, 2267 const bt_out_of_band_data_t* oob_data) { 2268 bdcpy(oob_cb.bdaddr, bd_addr->address); 2269 memcpy(&oob_cb.oob_data, oob_data, sizeof(bt_out_of_band_data_t)); 2270 2271 uint8_t empty[] = {0, 0, 0, 0, 0, 0, 0}; 2272 // If LE Bluetooth Device Address is provided, use provided address type 2273 // value. 2274 if (memcmp(oob_data->le_bt_dev_addr, empty, 7) != 0) { 2275 /* byte no 7 is address type in LE Bluetooth Address OOB data */ 2276 uint8_t address_type = oob_data->le_bt_dev_addr[6]; 2277 if (address_type == BLE_ADDR_PUBLIC || address_type == BLE_ADDR_RANDOM) { 2278 // bd_addr->address is already reversed, so use it instead of 2279 // oob_data->le_bt_dev_addr 2280 BTM_SecAddBleDevice(bd_addr->address, NULL, BT_DEVICE_TYPE_BLE, 2281 address_type); 2282 } 2283 } 2284 2285 bdstr_t bdstr; 2286 BTIF_TRACE_EVENT("%s: bd_addr=%s, transport=%d", __func__, 2287 bdaddr_to_string(bd_addr, bdstr, sizeof(bdstr)), transport); 2288 return btif_dm_create_bond(bd_addr, transport); 2289 } 2290 2291 /******************************************************************************* 2292 * 2293 * Function btif_dm_cancel_bond 2294 * 2295 * Description Initiate bonding with the specified device 2296 * 2297 * Returns bt_status_t 2298 * 2299 ******************************************************************************/ 2300 2301 bt_status_t btif_dm_cancel_bond(const bt_bdaddr_t* bd_addr) { 2302 bdstr_t bdstr; 2303 2304 BTIF_TRACE_EVENT("%s: bd_addr=%s", __func__, 2305 bdaddr_to_string(bd_addr, bdstr, sizeof(bdstr))); 2306 2307 btif_stats_add_bond_event(bd_addr, BTIF_DM_FUNC_CANCEL_BOND, 2308 pairing_cb.state); 2309 2310 /* TODO: 2311 ** 1. Restore scan modes 2312 ** 2. special handling for HID devices 2313 */ 2314 if (pairing_cb.state == BT_BOND_STATE_BONDING) { 2315 if (pairing_cb.is_ssp) { 2316 if (pairing_cb.is_le_only) { 2317 BTA_DmBleSecurityGrant((uint8_t*)bd_addr->address, 2318 BTA_DM_SEC_PAIR_NOT_SPT); 2319 } else { 2320 BTA_DmConfirm((uint8_t*)bd_addr->address, false); 2321 BTA_DmBondCancel((uint8_t*)bd_addr->address); 2322 btif_storage_remove_bonded_device((bt_bdaddr_t*)bd_addr); 2323 } 2324 } else { 2325 if (pairing_cb.is_le_only) { 2326 BTA_DmBondCancel((uint8_t*)bd_addr->address); 2327 } else { 2328 BTA_DmPinReply((uint8_t*)bd_addr->address, false, 0, NULL); 2329 } 2330 /* Cancel bonding, in case it is in ACL connection setup state */ 2331 BTA_DmBondCancel((uint8_t*)bd_addr->address); 2332 } 2333 } 2334 2335 return BT_STATUS_SUCCESS; 2336 } 2337 2338 /******************************************************************************* 2339 * 2340 * Function btif_dm_hh_open_failed 2341 * 2342 * Description informs the upper layers if the HH have failed during 2343 * bonding 2344 * 2345 * Returns none 2346 * 2347 ******************************************************************************/ 2348 2349 void btif_dm_hh_open_failed(bt_bdaddr_t* bdaddr) { 2350 if (pairing_cb.state == BT_BOND_STATE_BONDING && 2351 bdcmp(bdaddr->address, pairing_cb.bd_addr) == 0) { 2352 bond_state_changed(BT_STATUS_FAIL, bdaddr, BT_BOND_STATE_NONE); 2353 } 2354 } 2355 2356 /******************************************************************************* 2357 * 2358 * Function btif_dm_remove_bond 2359 * 2360 * Description Removes bonding with the specified device 2361 * 2362 * Returns bt_status_t 2363 * 2364 ******************************************************************************/ 2365 2366 bt_status_t btif_dm_remove_bond(const bt_bdaddr_t* bd_addr) { 2367 bdstr_t bdstr; 2368 2369 BTIF_TRACE_EVENT("%s: bd_addr=%s", __func__, 2370 bdaddr_to_string(bd_addr, bdstr, sizeof(bdstr))); 2371 2372 btif_stats_add_bond_event(bd_addr, BTIF_DM_FUNC_REMOVE_BOND, 2373 pairing_cb.state); 2374 2375 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_REMOVE_BOND, 2376 (char*)bd_addr, sizeof(bt_bdaddr_t), NULL); 2377 2378 return BT_STATUS_SUCCESS; 2379 } 2380 2381 /******************************************************************************* 2382 * 2383 * Function btif_dm_pin_reply 2384 * 2385 * Description BT legacy pairing - PIN code reply 2386 * 2387 * Returns bt_status_t 2388 * 2389 ******************************************************************************/ 2390 2391 bt_status_t btif_dm_pin_reply(const bt_bdaddr_t* bd_addr, uint8_t accept, 2392 uint8_t pin_len, bt_pin_code_t* pin_code) { 2393 BTIF_TRACE_EVENT("%s: accept=%d", __func__, accept); 2394 if (pin_code == NULL || pin_len > PIN_CODE_LEN) return BT_STATUS_FAIL; 2395 if (pairing_cb.is_le_only) { 2396 int i; 2397 uint32_t passkey = 0; 2398 int multi[] = {100000, 10000, 1000, 100, 10, 1}; 2399 BD_ADDR remote_bd_addr; 2400 bdcpy(remote_bd_addr, bd_addr->address); 2401 for (i = 0; i < 6; i++) { 2402 passkey += (multi[i] * (pin_code->pin[i] - '0')); 2403 } 2404 BTIF_TRACE_DEBUG("btif_dm_pin_reply: passkey: %d", passkey); 2405 BTA_DmBlePasskeyReply(remote_bd_addr, accept, passkey); 2406 2407 } else { 2408 BTA_DmPinReply((uint8_t*)bd_addr->address, accept, pin_len, pin_code->pin); 2409 if (accept) pairing_cb.pin_code_len = pin_len; 2410 } 2411 return BT_STATUS_SUCCESS; 2412 } 2413 2414 /******************************************************************************* 2415 * 2416 * Function btif_dm_ssp_reply 2417 * 2418 * Description BT SSP Reply - Just Works, Numeric Comparison & Passkey 2419 * Entry 2420 * 2421 * Returns bt_status_t 2422 * 2423 ******************************************************************************/ 2424 bt_status_t btif_dm_ssp_reply(const bt_bdaddr_t* bd_addr, 2425 bt_ssp_variant_t variant, uint8_t accept, 2426 UNUSED_ATTR uint32_t passkey) { 2427 if (variant == BT_SSP_VARIANT_PASSKEY_ENTRY) { 2428 /* This is not implemented in the stack. 2429 * For devices with display, this is not needed 2430 */ 2431 BTIF_TRACE_WARNING("%s: Not implemented", __func__); 2432 return BT_STATUS_FAIL; 2433 } 2434 /* BT_SSP_VARIANT_CONSENT & BT_SSP_VARIANT_PASSKEY_CONFIRMATION supported */ 2435 BTIF_TRACE_EVENT("%s: accept=%d", __func__, accept); 2436 if (pairing_cb.is_le_only) { 2437 if (pairing_cb.is_le_nc) { 2438 BTA_DmBleConfirmReply((uint8_t*)bd_addr->address, accept); 2439 } else { 2440 if (accept) 2441 BTA_DmBleSecurityGrant((uint8_t*)bd_addr->address, BTA_DM_SEC_GRANTED); 2442 else 2443 BTA_DmBleSecurityGrant((uint8_t*)bd_addr->address, 2444 BTA_DM_SEC_PAIR_NOT_SPT); 2445 } 2446 } else { 2447 BTA_DmConfirm((uint8_t*)bd_addr->address, accept); 2448 } 2449 return BT_STATUS_SUCCESS; 2450 } 2451 2452 /******************************************************************************* 2453 * 2454 * Function btif_dm_get_adapter_property 2455 * 2456 * Description Queries the BTA for the adapter property 2457 * 2458 * Returns bt_status_t 2459 * 2460 ******************************************************************************/ 2461 bt_status_t btif_dm_get_adapter_property(bt_property_t* prop) { 2462 BTIF_TRACE_EVENT("%s: type=0x%x", __func__, prop->type); 2463 switch (prop->type) { 2464 case BT_PROPERTY_BDNAME: { 2465 bt_bdname_t* bd_name = (bt_bdname_t*)prop->val; 2466 strncpy((char*)bd_name->name, (char*)btif_get_default_local_name(), 2467 sizeof(bd_name->name) - 1); 2468 bd_name->name[sizeof(bd_name->name) - 1] = 0; 2469 prop->len = strlen((char*)bd_name->name); 2470 } break; 2471 2472 case BT_PROPERTY_ADAPTER_SCAN_MODE: { 2473 /* if the storage does not have it. Most likely app never set it. Default 2474 * is NONE */ 2475 bt_scan_mode_t* mode = (bt_scan_mode_t*)prop->val; 2476 *mode = BT_SCAN_MODE_NONE; 2477 prop->len = sizeof(bt_scan_mode_t); 2478 } break; 2479 2480 case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: { 2481 uint32_t* tmt = (uint32_t*)prop->val; 2482 *tmt = 120; /* default to 120s, if not found in NV */ 2483 prop->len = sizeof(uint32_t); 2484 } break; 2485 2486 default: 2487 prop->len = 0; 2488 return BT_STATUS_FAIL; 2489 } 2490 return BT_STATUS_SUCCESS; 2491 } 2492 2493 /******************************************************************************* 2494 * 2495 * Function btif_dm_get_remote_services 2496 * 2497 * Description Start SDP to get remote services 2498 * 2499 * Returns bt_status_t 2500 * 2501 ******************************************************************************/ 2502 bt_status_t btif_dm_get_remote_services(bt_bdaddr_t* remote_addr) { 2503 bdstr_t bdstr; 2504 2505 BTIF_TRACE_EVENT("%s: remote_addr=%s", __func__, 2506 bdaddr_to_string(remote_addr, bdstr, sizeof(bdstr))); 2507 2508 BTA_DmDiscover(remote_addr->address, BTA_ALL_SERVICE_MASK, 2509 bte_dm_search_services_evt, true); 2510 2511 return BT_STATUS_SUCCESS; 2512 } 2513 2514 /******************************************************************************* 2515 * 2516 * Function btif_dm_get_remote_services_transport 2517 * 2518 * Description Start SDP to get remote services by transport 2519 * 2520 * Returns bt_status_t 2521 * 2522 ******************************************************************************/ 2523 bt_status_t btif_dm_get_remote_services_by_transport(bt_bdaddr_t* remote_addr, 2524 const int transport) { 2525 BTIF_TRACE_EVENT("%s", __func__); 2526 2527 /* Set the mask extension */ 2528 tBTA_SERVICE_MASK_EXT mask_ext; 2529 mask_ext.num_uuid = 0; 2530 mask_ext.p_uuid = NULL; 2531 mask_ext.srvc_mask = BTA_ALL_SERVICE_MASK; 2532 2533 BTA_DmDiscoverByTransport(remote_addr->address, &mask_ext, 2534 bte_dm_search_services_evt, true, transport); 2535 2536 return BT_STATUS_SUCCESS; 2537 } 2538 2539 /******************************************************************************* 2540 * 2541 * Function btif_dm_get_remote_service_record 2542 * 2543 * Description Start SDP to get remote service record 2544 * 2545 * 2546 * Returns bt_status_t 2547 ******************************************************************************/ 2548 bt_status_t btif_dm_get_remote_service_record(bt_bdaddr_t* remote_addr, 2549 bt_uuid_t* uuid) { 2550 tSDP_UUID sdp_uuid; 2551 bdstr_t bdstr; 2552 2553 BTIF_TRACE_EVENT("%s: remote_addr=%s", __func__, 2554 bdaddr_to_string(remote_addr, bdstr, sizeof(bdstr))); 2555 2556 sdp_uuid.len = MAX_UUID_SIZE; 2557 memcpy(sdp_uuid.uu.uuid128, uuid->uu, MAX_UUID_SIZE); 2558 2559 BTA_DmDiscoverUUID(remote_addr->address, &sdp_uuid, 2560 bte_dm_remote_service_record_evt, true); 2561 2562 return BT_STATUS_SUCCESS; 2563 } 2564 2565 void btif_dm_execute_service_request(uint16_t event, char* p_param) { 2566 bool b_enable = false; 2567 bt_status_t status; 2568 if (event == BTIF_DM_ENABLE_SERVICE) { 2569 b_enable = true; 2570 } 2571 status = 2572 btif_in_execute_service_request(*((tBTA_SERVICE_ID*)p_param), b_enable); 2573 if (status == BT_STATUS_SUCCESS) { 2574 bt_property_t property; 2575 bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS]; 2576 2577 /* Now send the UUID_PROPERTY_CHANGED event to the upper layer */ 2578 BTIF_STORAGE_FILL_PROPERTY(&property, BT_PROPERTY_UUIDS, 2579 sizeof(local_uuids), local_uuids); 2580 btif_storage_get_adapter_property(&property); 2581 HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, BT_STATUS_SUCCESS, 1, 2582 &property); 2583 } 2584 return; 2585 } 2586 2587 void btif_dm_proc_io_req(UNUSED_ATTR BD_ADDR bd_addr, 2588 UNUSED_ATTR tBTA_IO_CAP* p_io_cap, 2589 UNUSED_ATTR tBTA_OOB_DATA* p_oob_data, 2590 tBTA_AUTH_REQ* p_auth_req, bool is_orig) { 2591 uint8_t yes_no_bit = BTA_AUTH_SP_YES & *p_auth_req; 2592 /* if local initiated: 2593 ** 1. set DD + MITM 2594 ** if remote initiated: 2595 ** 1. Copy over the auth_req from peer's io_rsp 2596 ** 2. Set the MITM if peer has it set or if peer has DisplayYesNo 2597 *(iPhone) 2598 ** as a fallback set MITM+GB if peer had MITM set 2599 */ 2600 2601 BTIF_TRACE_DEBUG("+%s: p_auth_req=%d", __func__, *p_auth_req); 2602 if (pairing_cb.is_local_initiated) { 2603 /* if initing/responding to a dedicated bonding, use dedicate bonding bit */ 2604 *p_auth_req = BTA_AUTH_DD_BOND | BTA_AUTH_SP_YES; 2605 } else if (!is_orig) { 2606 /* peer initiated paring. They probably know what they want. 2607 ** Copy the mitm from peer device. 2608 */ 2609 BTIF_TRACE_DEBUG("%s: setting p_auth_req to peer's: %d", __func__, 2610 pairing_cb.auth_req); 2611 *p_auth_req = (pairing_cb.auth_req & BTA_AUTH_BONDS); 2612 2613 /* copy over the MITM bit as well. In addition if the peer has DisplayYesNo, 2614 * force MITM */ 2615 if ((yes_no_bit) || (pairing_cb.io_cap & BTM_IO_CAP_IO)) 2616 *p_auth_req |= BTA_AUTH_SP_YES; 2617 } else if (yes_no_bit) { 2618 /* set the general bonding bit for stored device */ 2619 *p_auth_req = BTA_AUTH_GEN_BOND | yes_no_bit; 2620 } 2621 BTIF_TRACE_DEBUG("-%s: p_auth_req=%d", __func__, *p_auth_req); 2622 } 2623 2624 void btif_dm_proc_io_rsp(UNUSED_ATTR BD_ADDR bd_addr, tBTA_IO_CAP io_cap, 2625 UNUSED_ATTR tBTA_OOB_DATA oob_data, 2626 tBTA_AUTH_REQ auth_req) { 2627 if (auth_req & BTA_AUTH_BONDS) { 2628 BTIF_TRACE_DEBUG("%s auth_req:%d", __func__, auth_req); 2629 pairing_cb.auth_req = auth_req; 2630 pairing_cb.io_cap = io_cap; 2631 } 2632 } 2633 2634 void btif_dm_set_oob_for_io_req(tBTA_OOB_DATA* p_has_oob_data) { 2635 if (is_empty_128bit(oob_cb.oob_data.c192)) { 2636 *p_has_oob_data = false; 2637 } else { 2638 *p_has_oob_data = true; 2639 } 2640 BTIF_TRACE_DEBUG("%s: *p_has_oob_data=%d", __func__, *p_has_oob_data); 2641 } 2642 2643 void btif_dm_set_oob_for_le_io_req(BD_ADDR bd_addr, 2644 tBTA_OOB_DATA* p_has_oob_data, 2645 tBTA_LE_AUTH_REQ* p_auth_req) { 2646 if (!is_empty_128bit(oob_cb.oob_data.le_sc_c) && 2647 !is_empty_128bit(oob_cb.oob_data.le_sc_r)) { 2648 /* We have LE SC OOB data */ 2649 2650 /* make sure OOB data is for this particular device */ 2651 if (memcmp(bd_addr, oob_cb.bdaddr, BD_ADDR_LEN) == 0) { 2652 *p_auth_req = ((*p_auth_req) | BTM_LE_AUTH_REQ_SC_ONLY); 2653 *p_has_oob_data = true; 2654 } else { 2655 *p_has_oob_data = false; 2656 BTIF_TRACE_WARNING("%s: remote address didn't match OOB data address", 2657 __func__); 2658 } 2659 } else if (!is_empty_128bit(oob_cb.oob_data.sm_tk)) { 2660 /* We have security manager TK */ 2661 2662 /* make sure OOB data is for this particular device */ 2663 if (memcmp(bd_addr, oob_cb.bdaddr, BD_ADDR_LEN) == 0) { 2664 // When using OOB with TK, SC Secure Connections bit must be disabled. 2665 tBTA_LE_AUTH_REQ mask = ~BTM_LE_AUTH_REQ_SC_ONLY; 2666 *p_auth_req = ((*p_auth_req) & mask); 2667 2668 *p_has_oob_data = true; 2669 } else { 2670 *p_has_oob_data = false; 2671 BTIF_TRACE_WARNING("%s: remote address didn't match OOB data address", 2672 __func__); 2673 } 2674 } else { 2675 *p_has_oob_data = false; 2676 } 2677 BTIF_TRACE_DEBUG("%s *p_has_oob_data=%d", __func__, *p_has_oob_data); 2678 } 2679 2680 #ifdef BTIF_DM_OOB_TEST 2681 void btif_dm_load_local_oob(void) { 2682 char prop_oob[PROPERTY_VALUE_MAX]; 2683 osi_property_get("service.brcm.bt.oob", prop_oob, "3"); 2684 BTIF_TRACE_DEBUG("%s: prop_oob = %s", __func__, prop_oob); 2685 if (prop_oob[0] != '3') { 2686 if (is_empty_128bit(oob_cb.oob_data.c192)) { 2687 BTIF_TRACE_DEBUG("%s: read OOB, call BTA_DmLocalOob()", __func__); 2688 BTA_DmLocalOob(); 2689 } 2690 } 2691 } 2692 2693 void btif_dm_proc_loc_oob(bool valid, BT_OCTET16 c, BT_OCTET16 r) { 2694 FILE* fp; 2695 const char* path_a = "/data/misc/bluedroid/LOCAL/a.key"; 2696 const char* path_b = "/data/misc/bluedroid/LOCAL/b.key"; 2697 const char* path = NULL; 2698 char prop_oob[PROPERTY_VALUE_MAX]; 2699 BTIF_TRACE_DEBUG("%s: valid=%d", __func__, valid); 2700 if (is_empty_128bit(oob_cb.oob_data.c192) && valid) { 2701 BTIF_TRACE_DEBUG("save local OOB data in memory"); 2702 memcpy(oob_cb.oob_data.c192, c, BT_OCTET16_LEN); 2703 memcpy(oob_cb.oob_data.r192, r, BT_OCTET16_LEN); 2704 osi_property_get("service.brcm.bt.oob", prop_oob, "3"); 2705 BTIF_TRACE_DEBUG("%s: prop_oob = %s", __func__, prop_oob); 2706 if (prop_oob[0] == '1') 2707 path = path_a; 2708 else if (prop_oob[0] == '2') 2709 path = path_b; 2710 if (path) { 2711 fp = fopen(path, "wb+"); 2712 if (fp == NULL) { 2713 BTIF_TRACE_DEBUG("%s: failed to save local OOB data to %s", __func__, 2714 path); 2715 } else { 2716 BTIF_TRACE_DEBUG("%s: save local OOB data into file %s", __func__, 2717 path); 2718 fwrite(c, 1, BT_OCTET16_LEN, fp); 2719 fwrite(r, 1, BT_OCTET16_LEN, fp); 2720 fclose(fp); 2721 } 2722 } 2723 } 2724 } 2725 2726 /******************************************************************************* 2727 * 2728 * Function btif_dm_get_smp_config 2729 * 2730 * Description Retrieve the SMP pairing options from the bt_stack.conf 2731 * file. To provide specific pairing options for the host 2732 * add a node with label "SmpOptions" to the config file 2733 * and assign it a comma separated list of 5 values in the 2734 * format: auth, io, ikey, rkey, ksize, oob 2735 * eg: PTS_SmpOptions=0xD,0x4,0xf,0xf,0x10 2736 * 2737 * Parameters: tBTE_APPL_CFG*: pointer to struct defining pairing options 2738 * 2739 * Returns true if the options were successfully read, else false 2740 * 2741 ******************************************************************************/ 2742 bool btif_dm_get_smp_config(tBTE_APPL_CFG* p_cfg) { 2743 if (!stack_config_get_interface()->get_pts_smp_options()) { 2744 BTIF_TRACE_DEBUG("%s: SMP options not found in configuration", __func__); 2745 return false; 2746 } 2747 2748 char conf[64]; 2749 const char* recv = stack_config_get_interface()->get_pts_smp_options(); 2750 char* pch; 2751 char* endptr; 2752 2753 strncpy(conf, recv, 64); 2754 conf[63] = 0; // null terminate 2755 2756 pch = strtok(conf, ","); 2757 if (pch != NULL) 2758 p_cfg->ble_auth_req = (uint8_t)strtoul(pch, &endptr, 16); 2759 else 2760 return false; 2761 2762 pch = strtok(NULL, ","); 2763 if (pch != NULL) 2764 p_cfg->ble_io_cap = (uint8_t)strtoul(pch, &endptr, 16); 2765 else 2766 return false; 2767 2768 pch = strtok(NULL, ","); 2769 if (pch != NULL) 2770 p_cfg->ble_init_key = (uint8_t)strtoul(pch, &endptr, 16); 2771 else 2772 return false; 2773 2774 pch = strtok(NULL, ","); 2775 if (pch != NULL) 2776 p_cfg->ble_resp_key = (uint8_t)strtoul(pch, &endptr, 16); 2777 else 2778 return false; 2779 2780 pch = strtok(NULL, ","); 2781 if (pch != NULL) 2782 p_cfg->ble_max_key_size = (uint8_t)strtoul(pch, &endptr, 16); 2783 else 2784 return false; 2785 2786 return true; 2787 } 2788 2789 bool btif_dm_proc_rmt_oob(BD_ADDR bd_addr, BT_OCTET16 p_c, BT_OCTET16 p_r) { 2790 char t[128]; 2791 FILE* fp; 2792 const char* path_a = "/data/misc/bluedroid/LOCAL/a.key"; 2793 const char* path_b = "/data/misc/bluedroid/LOCAL/b.key"; 2794 const char* path = NULL; 2795 char prop_oob[PROPERTY_VALUE_MAX]; 2796 bool result = false; 2797 bt_bdaddr_t bt_bd_addr; 2798 bdcpy(oob_cb.bdaddr, bd_addr); 2799 osi_property_get("service.brcm.bt.oob", prop_oob, "3"); 2800 BTIF_TRACE_DEBUG("%s: prop_oob = %s", __func__, prop_oob); 2801 if (prop_oob[0] == '1') 2802 path = path_b; 2803 else if (prop_oob[0] == '2') 2804 path = path_a; 2805 if (path) { 2806 fp = fopen(path, "rb"); 2807 if (fp == NULL) { 2808 BTIF_TRACE_DEBUG("%s: failed to read OOB keys from %s", __func__, path); 2809 return false; 2810 } else { 2811 BTIF_TRACE_DEBUG("%s: read OOB data from %s", __func__, path); 2812 fread(p_c, 1, BT_OCTET16_LEN, fp); 2813 fread(p_r, 1, BT_OCTET16_LEN, fp); 2814 fclose(fp); 2815 } 2816 BTIF_TRACE_DEBUG("----%s: true", __func__); 2817 snprintf(t, sizeof(t), "%02x:%02x:%02x:%02x:%02x:%02x", oob_cb.bdaddr[0], 2818 oob_cb.bdaddr[1], oob_cb.bdaddr[2], oob_cb.bdaddr[3], 2819 oob_cb.bdaddr[4], oob_cb.bdaddr[5]); 2820 BTIF_TRACE_DEBUG("----%s: peer_bdaddr = %s", __func__, t); 2821 snprintf(t, sizeof(t), 2822 "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x " 2823 "%02x %02x %02x", 2824 p_c[0], p_c[1], p_c[2], p_c[3], p_c[4], p_c[5], p_c[6], p_c[7], 2825 p_c[8], p_c[9], p_c[10], p_c[11], p_c[12], p_c[13], p_c[14], 2826 p_c[15]); 2827 BTIF_TRACE_DEBUG("----%s: c = %s", __func__, t); 2828 snprintf(t, sizeof(t), 2829 "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x " 2830 "%02x %02x %02x", 2831 p_r[0], p_r[1], p_r[2], p_r[3], p_r[4], p_r[5], p_r[6], p_r[7], 2832 p_r[8], p_r[9], p_r[10], p_r[11], p_r[12], p_r[13], p_r[14], 2833 p_r[15]); 2834 BTIF_TRACE_DEBUG("----%s: r = %s", __func__, t); 2835 bdcpy(bt_bd_addr.address, bd_addr); 2836 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_BOND_STATE_BONDING, 2837 (char*)&bt_bd_addr, sizeof(bt_bdaddr_t), NULL); 2838 result = true; 2839 } 2840 BTIF_TRACE_DEBUG("%s: result=%d", __func__, result); 2841 return result; 2842 } 2843 #endif /* BTIF_DM_OOB_TEST */ 2844 2845 static void btif_dm_ble_key_notif_evt(tBTA_DM_SP_KEY_NOTIF* p_ssp_key_notif) { 2846 bt_bdaddr_t bd_addr; 2847 bt_bdname_t bd_name; 2848 uint32_t cod; 2849 int dev_type; 2850 2851 BTIF_TRACE_DEBUG("%s", __func__); 2852 2853 /* Remote name update */ 2854 if (!btif_get_device_type(p_ssp_key_notif->bd_addr, &dev_type)) { 2855 dev_type = BT_DEVICE_TYPE_BLE; 2856 } 2857 btif_dm_update_ble_remote_properties(p_ssp_key_notif->bd_addr, 2858 p_ssp_key_notif->bd_name, 2859 (tBT_DEVICE_TYPE)dev_type); 2860 bdcpy(bd_addr.address, p_ssp_key_notif->bd_addr); 2861 memcpy(bd_name.name, p_ssp_key_notif->bd_name, BD_NAME_LEN); 2862 2863 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 2864 pairing_cb.is_ssp = false; 2865 cod = COD_UNCLASSIFIED; 2866 2867 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod, 2868 BT_SSP_VARIANT_PASSKEY_NOTIFICATION, p_ssp_key_notif->passkey); 2869 } 2870 2871 /******************************************************************************* 2872 * 2873 * Function btif_dm_ble_auth_cmpl_evt 2874 * 2875 * Description Executes authentication complete event in btif context 2876 * 2877 * Returns void 2878 * 2879 ******************************************************************************/ 2880 static void btif_dm_ble_auth_cmpl_evt(tBTA_DM_AUTH_CMPL* p_auth_cmpl) { 2881 /* Save link key, if not temporary */ 2882 bt_bdaddr_t bd_addr; 2883 bt_status_t status = BT_STATUS_FAIL; 2884 bt_bond_state_t state = BT_BOND_STATE_NONE; 2885 2886 bdcpy(bd_addr.address, p_auth_cmpl->bd_addr); 2887 2888 /* Clear OOB data */ 2889 memset(&oob_cb, 0, sizeof(oob_cb)); 2890 2891 if ((p_auth_cmpl->success == true) && (p_auth_cmpl->key_present)) { 2892 /* store keys */ 2893 } 2894 if (p_auth_cmpl->success) { 2895 status = BT_STATUS_SUCCESS; 2896 state = BT_BOND_STATE_BONDED; 2897 int addr_type; 2898 bt_bdaddr_t bdaddr; 2899 bdcpy(bdaddr.address, p_auth_cmpl->bd_addr); 2900 if (btif_storage_get_remote_addr_type(&bdaddr, &addr_type) != 2901 BT_STATUS_SUCCESS) 2902 btif_storage_set_remote_addr_type(&bdaddr, p_auth_cmpl->addr_type); 2903 2904 /* Test for temporary bonding */ 2905 if (btm_get_bond_type_dev(p_auth_cmpl->bd_addr) == BOND_TYPE_TEMPORARY) { 2906 BTIF_TRACE_DEBUG("%s: sending BT_BOND_STATE_NONE for Temp pairing", 2907 __func__); 2908 btif_storage_remove_bonded_device(&bdaddr); 2909 state = BT_BOND_STATE_NONE; 2910 } else { 2911 btif_dm_save_ble_bonding_keys(); 2912 BTA_GATTC_Refresh(bd_addr.address); 2913 btif_dm_get_remote_services_by_transport(&bd_addr, BTA_GATT_TRANSPORT_LE); 2914 } 2915 } else { 2916 /*Map the HCI fail reason to bt status */ 2917 switch (p_auth_cmpl->fail_reason) { 2918 case BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL: 2919 case BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL: 2920 case BTA_DM_AUTH_SMP_UNKNOWN_ERR: 2921 case BTA_DM_AUTH_SMP_CONN_TOUT: 2922 btif_dm_remove_ble_bonding_keys(); 2923 status = BT_STATUS_AUTH_FAILURE; 2924 break; 2925 case BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT: 2926 status = BT_STATUS_AUTH_REJECTED; 2927 break; 2928 default: 2929 btif_dm_remove_ble_bonding_keys(); 2930 status = BT_STATUS_FAIL; 2931 break; 2932 } 2933 } 2934 bond_state_changed(status, &bd_addr, state); 2935 } 2936 2937 void btif_dm_load_ble_local_keys(void) { 2938 memset(&ble_local_key_cb, 0, sizeof(btif_dm_local_key_cb_t)); 2939 2940 if (btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_ER, 2941 (char*)&ble_local_key_cb.er[0], 2942 BT_OCTET16_LEN) == BT_STATUS_SUCCESS) { 2943 ble_local_key_cb.is_er_rcvd = true; 2944 BTIF_TRACE_DEBUG("%s BLE ER key loaded", __func__); 2945 } 2946 2947 if ((btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_IR, 2948 (char*)&ble_local_key_cb.id_keys.ir[0], 2949 BT_OCTET16_LEN) == BT_STATUS_SUCCESS) && 2950 (btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_IRK, 2951 (char*)&ble_local_key_cb.id_keys.irk[0], 2952 BT_OCTET16_LEN) == BT_STATUS_SUCCESS) && 2953 (btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_DHK, 2954 (char*)&ble_local_key_cb.id_keys.dhk[0], 2955 BT_OCTET16_LEN) == BT_STATUS_SUCCESS)) { 2956 ble_local_key_cb.is_id_keys_rcvd = true; 2957 BTIF_TRACE_DEBUG("%s BLE ID keys loaded", __func__); 2958 } 2959 } 2960 void btif_dm_get_ble_local_keys(tBTA_DM_BLE_LOCAL_KEY_MASK* p_key_mask, 2961 BT_OCTET16 er, 2962 tBTA_BLE_LOCAL_ID_KEYS* p_id_keys) { 2963 if (ble_local_key_cb.is_er_rcvd) { 2964 memcpy(&er[0], &ble_local_key_cb.er[0], sizeof(BT_OCTET16)); 2965 *p_key_mask |= BTA_BLE_LOCAL_KEY_TYPE_ER; 2966 } 2967 2968 if (ble_local_key_cb.is_id_keys_rcvd) { 2969 memcpy(&p_id_keys->ir[0], &ble_local_key_cb.id_keys.ir[0], 2970 sizeof(BT_OCTET16)); 2971 memcpy(&p_id_keys->irk[0], &ble_local_key_cb.id_keys.irk[0], 2972 sizeof(BT_OCTET16)); 2973 memcpy(&p_id_keys->dhk[0], &ble_local_key_cb.id_keys.dhk[0], 2974 sizeof(BT_OCTET16)); 2975 *p_key_mask |= BTA_BLE_LOCAL_KEY_TYPE_ID; 2976 } 2977 BTIF_TRACE_DEBUG("%s *p_key_mask=0x%02x", __func__, *p_key_mask); 2978 } 2979 2980 void btif_dm_save_ble_bonding_keys(void) { 2981 bt_bdaddr_t bd_addr; 2982 2983 BTIF_TRACE_DEBUG("%s", __func__); 2984 2985 bdcpy(bd_addr.address, pairing_cb.bd_addr); 2986 2987 if (pairing_cb.ble.is_penc_key_rcvd) { 2988 btif_storage_add_ble_bonding_key(&bd_addr, (char*)&pairing_cb.ble.penc_key, 2989 BTIF_DM_LE_KEY_PENC, 2990 sizeof(tBTM_LE_PENC_KEYS)); 2991 } 2992 2993 if (pairing_cb.ble.is_pid_key_rcvd) { 2994 btif_storage_add_ble_bonding_key(&bd_addr, (char*)&pairing_cb.ble.pid_key, 2995 BTIF_DM_LE_KEY_PID, 2996 sizeof(tBTM_LE_PID_KEYS)); 2997 } 2998 2999 if (pairing_cb.ble.is_pcsrk_key_rcvd) { 3000 btif_storage_add_ble_bonding_key(&bd_addr, (char*)&pairing_cb.ble.pcsrk_key, 3001 BTIF_DM_LE_KEY_PCSRK, 3002 sizeof(tBTM_LE_PCSRK_KEYS)); 3003 } 3004 3005 if (pairing_cb.ble.is_lenc_key_rcvd) { 3006 btif_storage_add_ble_bonding_key(&bd_addr, (char*)&pairing_cb.ble.lenc_key, 3007 BTIF_DM_LE_KEY_LENC, 3008 sizeof(tBTM_LE_LENC_KEYS)); 3009 } 3010 3011 if (pairing_cb.ble.is_lcsrk_key_rcvd) { 3012 btif_storage_add_ble_bonding_key(&bd_addr, (char*)&pairing_cb.ble.lcsrk_key, 3013 BTIF_DM_LE_KEY_LCSRK, 3014 sizeof(tBTM_LE_LCSRK_KEYS)); 3015 } 3016 3017 if (pairing_cb.ble.is_lidk_key_rcvd) { 3018 btif_storage_add_ble_bonding_key(&bd_addr, NULL, BTIF_DM_LE_KEY_LID, 0); 3019 } 3020 } 3021 3022 void btif_dm_remove_ble_bonding_keys(void) { 3023 bt_bdaddr_t bd_addr; 3024 3025 BTIF_TRACE_DEBUG("%s", __func__); 3026 3027 bdcpy(bd_addr.address, pairing_cb.bd_addr); 3028 btif_storage_remove_ble_bonding_keys(&bd_addr); 3029 } 3030 3031 /******************************************************************************* 3032 * 3033 * Function btif_dm_ble_sec_req_evt 3034 * 3035 * Description Eprocess security request event in btif context 3036 * 3037 * Returns void 3038 * 3039 ******************************************************************************/ 3040 void btif_dm_ble_sec_req_evt(tBTA_DM_BLE_SEC_REQ* p_ble_req) { 3041 bt_bdaddr_t bd_addr; 3042 bt_bdname_t bd_name; 3043 uint32_t cod; 3044 int dev_type; 3045 3046 BTIF_TRACE_DEBUG("%s", __func__); 3047 3048 if (pairing_cb.state == BT_BOND_STATE_BONDING) { 3049 BTIF_TRACE_DEBUG("%s Discard security request", __func__); 3050 return; 3051 } 3052 3053 /* Remote name update */ 3054 if (!btif_get_device_type(p_ble_req->bd_addr, &dev_type)) { 3055 dev_type = BT_DEVICE_TYPE_BLE; 3056 } 3057 btif_dm_update_ble_remote_properties(p_ble_req->bd_addr, p_ble_req->bd_name, 3058 (tBT_DEVICE_TYPE)dev_type); 3059 3060 bdcpy(bd_addr.address, p_ble_req->bd_addr); 3061 memcpy(bd_name.name, p_ble_req->bd_name, BD_NAME_LEN); 3062 3063 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3064 3065 pairing_cb.bond_type = BOND_TYPE_PERSISTENT; 3066 pairing_cb.is_le_only = true; 3067 pairing_cb.is_le_nc = false; 3068 pairing_cb.is_ssp = true; 3069 btm_set_bond_type_dev(p_ble_req->bd_addr, pairing_cb.bond_type); 3070 3071 cod = COD_UNCLASSIFIED; 3072 3073 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod, 3074 BT_SSP_VARIANT_CONSENT, 0); 3075 } 3076 3077 /******************************************************************************* 3078 * 3079 * Function btif_dm_ble_passkey_req_evt 3080 * 3081 * Description Executes pin request event in btif context 3082 * 3083 * Returns void 3084 * 3085 ******************************************************************************/ 3086 static void btif_dm_ble_passkey_req_evt(tBTA_DM_PIN_REQ* p_pin_req) { 3087 bt_bdaddr_t bd_addr; 3088 bt_bdname_t bd_name; 3089 uint32_t cod; 3090 int dev_type; 3091 3092 /* Remote name update */ 3093 if (!btif_get_device_type(p_pin_req->bd_addr, &dev_type)) { 3094 dev_type = BT_DEVICE_TYPE_BLE; 3095 } 3096 btif_dm_update_ble_remote_properties(p_pin_req->bd_addr, p_pin_req->bd_name, 3097 (tBT_DEVICE_TYPE)dev_type); 3098 3099 bdcpy(bd_addr.address, p_pin_req->bd_addr); 3100 memcpy(bd_name.name, p_pin_req->bd_name, BD_NAME_LEN); 3101 3102 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3103 pairing_cb.is_le_only = true; 3104 3105 cod = COD_UNCLASSIFIED; 3106 3107 HAL_CBACK(bt_hal_cbacks, pin_request_cb, &bd_addr, &bd_name, cod, false); 3108 } 3109 static void btif_dm_ble_key_nc_req_evt(tBTA_DM_SP_KEY_NOTIF* p_notif_req) { 3110 /* TODO implement key notification for numeric comparison */ 3111 BTIF_TRACE_DEBUG("%s", __func__); 3112 3113 /* Remote name update */ 3114 btif_update_remote_properties(p_notif_req->bd_addr, p_notif_req->bd_name, 3115 NULL, BT_DEVICE_TYPE_BLE); 3116 3117 bt_bdaddr_t bd_addr; 3118 bdcpy(bd_addr.address, p_notif_req->bd_addr); 3119 3120 bt_bdname_t bd_name; 3121 memcpy(bd_name.name, p_notif_req->bd_name, BD_NAME_LEN); 3122 3123 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3124 pairing_cb.is_ssp = false; 3125 pairing_cb.is_le_only = true; 3126 pairing_cb.is_le_nc = true; 3127 3128 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, COD_UNCLASSIFIED, 3129 BT_SSP_VARIANT_PASSKEY_CONFIRMATION, p_notif_req->passkey); 3130 } 3131 3132 static void btif_dm_ble_oob_req_evt(tBTA_DM_SP_RMT_OOB* req_oob_type) { 3133 BTIF_TRACE_DEBUG("%s", __func__); 3134 3135 bt_bdaddr_t bd_addr; 3136 bdcpy(bd_addr.address, req_oob_type->bd_addr); 3137 /* We already checked if OOB data is present in 3138 * btif_dm_set_oob_for_le_io_req, but check here again. If it's not present 3139 * do nothing, pairing will timeout. 3140 */ 3141 if (is_empty_128bit(oob_cb.oob_data.sm_tk)) { 3142 return; 3143 } 3144 3145 /* make sure OOB data is for this particular device */ 3146 if (memcmp(req_oob_type->bd_addr, oob_cb.bdaddr, BD_ADDR_LEN) != 0) { 3147 BTIF_TRACE_WARNING("%s: remote address didn't match OOB data address", 3148 __func__); 3149 return; 3150 } 3151 3152 /* Remote name update */ 3153 btif_update_remote_properties(req_oob_type->bd_addr, req_oob_type->bd_name, 3154 NULL, BT_DEVICE_TYPE_BLE); 3155 3156 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3157 pairing_cb.is_ssp = false; 3158 pairing_cb.is_le_only = true; 3159 pairing_cb.is_le_nc = false; 3160 3161 BTM_BleOobDataReply(req_oob_type->bd_addr, 0, 16, oob_cb.oob_data.sm_tk); 3162 } 3163 3164 static void btif_dm_ble_sc_oob_req_evt(tBTA_DM_SP_RMT_OOB* req_oob_type) { 3165 BTIF_TRACE_DEBUG("%s", __func__); 3166 3167 bt_bdaddr_t bd_addr; 3168 bdcpy(bd_addr.address, req_oob_type->bd_addr); 3169 3170 /* We already checked if OOB data is present in 3171 * btif_dm_set_oob_for_le_io_req, but check here again. If it's not present 3172 * do nothing, pairing will timeout. 3173 */ 3174 if (is_empty_128bit(oob_cb.oob_data.le_sc_c) && 3175 is_empty_128bit(oob_cb.oob_data.le_sc_r)) { 3176 BTIF_TRACE_WARNING("%s: LE SC OOB data is empty", __func__); 3177 return; 3178 } 3179 3180 /* make sure OOB data is for this particular device */ 3181 if (memcmp(req_oob_type->bd_addr, oob_cb.bdaddr, BD_ADDR_LEN) != 0) { 3182 BTIF_TRACE_WARNING("%s: remote address didn't match OOB data address", 3183 __func__); 3184 return; 3185 } 3186 3187 /* Remote name update */ 3188 btif_update_remote_properties(req_oob_type->bd_addr, req_oob_type->bd_name, 3189 NULL, BT_DEVICE_TYPE_BLE); 3190 3191 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3192 pairing_cb.is_ssp = false; 3193 pairing_cb.is_le_only = 3194 true; // TODO: we can derive classic pairing from this one 3195 pairing_cb.is_le_nc = false; 3196 3197 BTM_BleSecureConnectionOobDataReply( 3198 req_oob_type->bd_addr, oob_cb.oob_data.le_sc_c, oob_cb.oob_data.le_sc_r); 3199 } 3200 3201 void btif_dm_update_ble_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name, 3202 tBT_DEVICE_TYPE dev_type) { 3203 btif_update_remote_properties(bd_addr, bd_name, NULL, dev_type); 3204 } 3205 3206 static void btif_dm_ble_tx_test_cback(void* p) { 3207 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_LE_TX_TEST, (char*)p, 1, 3208 NULL); 3209 } 3210 3211 static void btif_dm_ble_rx_test_cback(void* p) { 3212 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_LE_RX_TEST, (char*)p, 1, 3213 NULL); 3214 } 3215 3216 static void btif_dm_ble_test_end_cback(void* p) { 3217 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_LE_TEST_END, (char*)p, 3218 3, NULL); 3219 } 3220 /******************************************************************************* 3221 * 3222 * Function btif_le_test_mode 3223 * 3224 * Description Sends a HCI BLE Test command to the Controller 3225 * 3226 * Returns BT_STATUS_SUCCESS on success 3227 * 3228 ******************************************************************************/ 3229 bt_status_t btif_le_test_mode(uint16_t opcode, uint8_t* buf, uint8_t len) { 3230 switch (opcode) { 3231 case HCI_BLE_TRANSMITTER_TEST: 3232 if (len != 3) return BT_STATUS_PARM_INVALID; 3233 BTM_BleTransmitterTest(buf[0], buf[1], buf[2], btif_dm_ble_tx_test_cback); 3234 break; 3235 case HCI_BLE_RECEIVER_TEST: 3236 if (len != 1) return BT_STATUS_PARM_INVALID; 3237 BTM_BleReceiverTest(buf[0], btif_dm_ble_rx_test_cback); 3238 break; 3239 case HCI_BLE_TEST_END: 3240 BTM_BleTestEnd((tBTM_CMPL_CB*)btif_dm_ble_test_end_cback); 3241 break; 3242 default: 3243 BTIF_TRACE_ERROR("%s: Unknown LE Test Mode Command 0x%x", __func__, 3244 opcode); 3245 return BT_STATUS_UNSUPPORTED; 3246 } 3247 return BT_STATUS_SUCCESS; 3248 } 3249 3250 void btif_dm_on_disable() { 3251 /* cancel any pending pairing requests */ 3252 if (pairing_cb.state == BT_BOND_STATE_BONDING) { 3253 bt_bdaddr_t bd_addr; 3254 3255 BTIF_TRACE_DEBUG("%s: Cancel pending pairing request", __func__); 3256 bdcpy(bd_addr.address, pairing_cb.bd_addr); 3257 btif_dm_cancel_bond(&bd_addr); 3258 } 3259 } 3260 3261 /******************************************************************************* 3262 * 3263 * Function btif_dm_read_energy_info 3264 * 3265 * Description Reads the energy info from controller 3266 * 3267 * Returns void 3268 * 3269 ******************************************************************************/ 3270 void btif_dm_read_energy_info() { BTA_DmBleGetEnergyInfo(bta_energy_info_cb); } 3271 3272 static char* btif_get_default_local_name() { 3273 if (btif_default_local_name[0] == '\0') { 3274 int max_len = sizeof(btif_default_local_name) - 1; 3275 if (BTM_DEF_LOCAL_NAME[0] != '\0') { 3276 strncpy(btif_default_local_name, BTM_DEF_LOCAL_NAME, max_len); 3277 } else { 3278 char prop_model[PROPERTY_VALUE_MAX]; 3279 osi_property_get(PROPERTY_PRODUCT_MODEL, prop_model, ""); 3280 strncpy(btif_default_local_name, prop_model, max_len); 3281 } 3282 btif_default_local_name[max_len] = '\0'; 3283 } 3284 return btif_default_local_name; 3285 } 3286 3287 static void btif_stats_add_bond_event(const bt_bdaddr_t* bd_addr, 3288 bt_bond_function_t function, 3289 bt_bond_state_t state) { 3290 std::unique_lock<std::mutex> lock(bond_event_lock); 3291 3292 btif_bond_event_t* event = &btif_dm_bond_events[btif_events_end_index]; 3293 memcpy(&event->bd_addr, bd_addr, sizeof(bt_bdaddr_t)); 3294 event->function = function; 3295 event->state = state; 3296 clock_gettime(CLOCK_REALTIME, &event->timestamp); 3297 3298 btif_num_bond_events++; 3299 btif_events_end_index = 3300 (btif_events_end_index + 1) % (MAX_BTIF_BOND_EVENT_ENTRIES + 1); 3301 if (btif_events_end_index == btif_events_start_index) { 3302 btif_events_start_index = 3303 (btif_events_start_index + 1) % (MAX_BTIF_BOND_EVENT_ENTRIES + 1); 3304 } 3305 3306 int type; 3307 btif_get_device_type(bd_addr->address, &type); 3308 3309 system_bt_osi::device_type_t device_type; 3310 switch (type) { 3311 case BT_DEVICE_TYPE_BREDR: 3312 device_type = system_bt_osi::DEVICE_TYPE_BREDR; 3313 break; 3314 case BT_DEVICE_TYPE_BLE: 3315 device_type = system_bt_osi::DEVICE_TYPE_LE; 3316 break; 3317 case BT_DEVICE_TYPE_DUMO: 3318 device_type = system_bt_osi::DEVICE_TYPE_DUMO; 3319 break; 3320 default: 3321 device_type = system_bt_osi::DEVICE_TYPE_UNKNOWN; 3322 break; 3323 } 3324 3325 uint32_t cod = get_cod(bd_addr); 3326 uint64_t ts = 3327 event->timestamp.tv_sec * 1000 + event->timestamp.tv_nsec / 1000000; 3328 system_bt_osi::BluetoothMetricsLogger::GetInstance()->LogPairEvent( 3329 0, ts, cod, device_type); 3330 } 3331 3332 void btif_debug_bond_event_dump(int fd) { 3333 std::unique_lock<std::mutex> lock(bond_event_lock); 3334 dprintf(fd, "\nBond Events: \n"); 3335 dprintf(fd, " Total Number of events: %zu\n", btif_num_bond_events); 3336 if (btif_num_bond_events > 0) 3337 dprintf(fd, 3338 " Time BD_ADDR Function State\n"); 3339 3340 for (size_t i = btif_events_start_index; i != btif_events_end_index; 3341 i = (i + 1) % (MAX_BTIF_BOND_EVENT_ENTRIES + 1)) { 3342 btif_bond_event_t* event = &btif_dm_bond_events[i]; 3343 3344 char eventtime[20]; 3345 char temptime[20]; 3346 struct tm* tstamp = localtime(&event->timestamp.tv_sec); 3347 strftime(temptime, sizeof(temptime), "%H:%M:%S", tstamp); 3348 snprintf(eventtime, sizeof(eventtime), "%s.%03ld", temptime, 3349 event->timestamp.tv_nsec / 1000000); 3350 3351 char bdaddr[18]; 3352 bdaddr_to_string(&event->bd_addr, bdaddr, sizeof(bdaddr)); 3353 3354 const char* func_name; 3355 switch (event->function) { 3356 case BTIF_DM_FUNC_CREATE_BOND: 3357 func_name = "btif_dm_create_bond"; 3358 break; 3359 case BTIF_DM_FUNC_REMOVE_BOND: 3360 func_name = "btif_dm_remove_bond"; 3361 break; 3362 case BTIF_DM_FUNC_BOND_STATE_CHANGED: 3363 func_name = "bond_state_changed "; 3364 break; 3365 default: 3366 func_name = "Invalid value "; 3367 break; 3368 } 3369 3370 const char* bond_state; 3371 switch (event->state) { 3372 case BT_BOND_STATE_NONE: 3373 bond_state = "BOND_STATE_NONE"; 3374 break; 3375 case BT_BOND_STATE_BONDING: 3376 bond_state = "BOND_STATE_BONDING"; 3377 break; 3378 case BT_BOND_STATE_BONDED: 3379 bond_state = "BOND_STATE_BONDED"; 3380 break; 3381 default: 3382 bond_state = "Invalid bond state"; 3383 break; 3384 } 3385 dprintf(fd, " %s %s %s %s\n", eventtime, bdaddr, func_name, bond_state); 3386 } 3387 } 3388
