Home | History | Annotate | Download | only in opcode
      1 /* Opcode table header for m680[01234]0/m6888[12]/m68851.
      2    Copyright (C) 1989-2014 Free Software Foundation, Inc.
      3 
      4    This file is part of GDB, GAS, and the GNU binutils.
      5 
      6    GDB, GAS, and the GNU binutils are free software; you can redistribute
      7    them and/or modify them under the terms of the GNU General Public
      8    License as published by the Free Software Foundation; either version 3,
      9    or (at your option) any later version.
     10 
     11    GDB, GAS, and the GNU binutils are distributed in the hope that they
     12    will be useful, but WITHOUT ANY WARRANTY; without even the implied
     13    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
     14    the GNU General Public License for more details.
     15 
     16    You should have received a copy of the GNU General Public License
     17    along with this file; see the file COPYING3.  If not, write to the Free
     18    Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
     19    02110-1301, USA.  */
     20 
     21 /* These are used as bit flags for the arch field in the m68k_opcode
     22    structure.  */
     23 #define	_m68k_undef  0
     24 #define	m68000   0x001
     25 #define	m68010   0x002
     26 #define	m68020   0x004
     27 #define	m68030   0x008
     28 #define	m68040   0x010
     29 #define m68060   0x020
     30 #define	m68881   0x040
     31 #define	m68851   0x080
     32 #define cpu32	 0x100		/* e.g., 68332 */
     33 #define fido_a   0x200
     34 #define m68k_mask  0x3ff
     35 
     36 #define mcfmac   0x400		/* ColdFire MAC. */
     37 #define mcfemac  0x800		/* ColdFire EMAC. */
     38 #define cfloat   0x1000		/* ColdFire FPU.  */
     39 #define mcfhwdiv 0x2000		/* ColdFire hardware divide.  */
     40 
     41 #define mcfisa_a 0x4000		/* ColdFire ISA_A.  */
     42 #define mcfisa_aa 0x8000	/* ColdFire ISA_A+.  */
     43 #define mcfisa_b 0x10000	/* ColdFire ISA_B.  */
     44 #define mcfisa_c 0x20000	/* ColdFire ISA_C.  */
     45 #define mcfusp   0x40000	/* ColdFire USP instructions.  */
     46 #define mcf_mask 0x7e400
     47 
     48 /* Handy aliases.  */
     49 #define	m68040up   (m68040 | m68060)
     50 #define	m68030up   (m68030 | m68040up)
     51 #define	m68020up   (m68020 | m68030up)
     52 #define	m68010up   (m68010 | cpu32 | fido_a | m68020up)
     53 #define	m68000up   (m68000 | m68010up)
     54 
     55 #define	mfloat  (m68881 | m68040 | m68060)
     56 #define	mmmu    (m68851 | m68030 | m68040 | m68060)
     57 
     58 /* The structure used to hold information for an opcode.  */
     59 
     60 struct m68k_opcode
     61 {
     62   /* The opcode name.  */
     63   const char *name;
     64   /* The pseudo-size of the instruction(in bytes).  Used to determine
     65      number of bytes necessary to disassemble the instruction.  */
     66   unsigned int size;
     67   /* The opcode itself.  */
     68   unsigned long opcode;
     69   /* The mask used by the disassembler.  */
     70   unsigned long match;
     71   /* The arguments.  */
     72   const char *args;
     73   /* The architectures which support this opcode.  */
     74   unsigned int arch;
     75 };
     76 
     77 /* The structure used to hold information for an opcode alias.  */
     78 
     79 struct m68k_opcode_alias
     80 {
     81   /* The alias name.  */
     82   const char *alias;
     83   /* The instruction for which this is an alias.  */
     84   const char *primary;
     85 };
     86 
     87 /* We store four bytes of opcode for all opcodes because that is the
     88    most any of them need.  The actual length of an instruction is
     89    always at least 2 bytes, and is as much longer as necessary to hold
     90    the operands it has.
     91 
     92    The match field is a mask saying which bits must match particular
     93    opcode in order for an instruction to be an instance of that
     94    opcode.
     95 
     96    The args field is a string containing two characters for each
     97    operand of the instruction.  The first specifies the kind of
     98    operand; the second, the place it is stored.
     99 
    100    If the first char of args is '.', it indicates that the opcode is
    101    two words.  This is only necessary when the match field does not
    102    have any bits set in the second opcode word.  Such a '.' is skipped
    103    for operand processing.  */
    104 
    105 /* Kinds of operands:
    106    Characters used: AaBbCcDdEeFfGgHIiJjKkLlMmnOopQqRrSsTtUuVvWwXxYyZz01234|*~%;@!&$?/<>#^+-
    107 
    108    D  data register only.  Stored as 3 bits.
    109    A  address register only.  Stored as 3 bits.
    110    a  address register indirect only.  Stored as 3 bits.
    111    R  either kind of register.  Stored as 4 bits.
    112    r  either kind of register indirect only.  Stored as 4 bits.
    113       At the moment, used only for cas2 instruction.
    114    F  floating point coprocessor register only.   Stored as 3 bits.
    115    O  an offset (or width): immediate data 0-31 or data register.
    116       Stored as 6 bits in special format for BF... insns.
    117    +  autoincrement only.  Stored as 3 bits (number of the address register).
    118    -  autodecrement only.  Stored as 3 bits (number of the address register).
    119    Q  quick immediate data.  Stored as 3 bits.
    120       This matches an immediate operand only when value is in range 1 .. 8.
    121    M  moveq immediate data.  Stored as 8 bits.
    122       This matches an immediate operand only when value is in range -128..127
    123    T  trap vector immediate data.  Stored as 4 bits.
    124 
    125    k  K-factor for fmove.p instruction.   Stored as a 7-bit constant or
    126       a three bit register offset, depending on the field type.
    127 
    128    #  immediate data.  Stored in special places (b, w or l)
    129       which say how many bits to store.
    130    ^  immediate data for floating point instructions.   Special places
    131       are offset by 2 bytes from '#'...
    132    B  pc-relative address, converted to an offset
    133       that is treated as immediate data.
    134    d  displacement and register.  Stores the register as 3 bits
    135       and stores the displacement in the entire second word.
    136 
    137    C  the CCR.  No need to store it; this is just for filtering validity.
    138    S  the SR.  No need to store, just as with CCR.
    139    U  the USP.  No need to store, just as with CCR.
    140    E  the MAC ACC.  No need to store, just as with CCR.
    141    e  the EMAC ACC[0123].
    142    G  the MAC/EMAC MACSR.  No need to store, just as with CCR.
    143    g  the EMAC ACCEXT{01,23}.
    144    H  the MASK.  No need to store, just as with CCR.
    145    i  the MAC/EMAC scale factor.
    146 
    147    I  Coprocessor ID.   Not printed if 1.   The Coprocessor ID is always
    148       extracted from the 'd' field of word one, which means that an extended
    149       coprocessor opcode can be skipped using the 'i' place, if needed.
    150 
    151    s  System Control register for the floating point coprocessor.
    152 
    153    J  Misc register for movec instruction, stored in 'j' format.
    154 	Possible values:
    155 	0x000	SFC	Source Function Code reg	[60, 40, 30, 20, 10]
    156 	0x001	DFC	Data Function Code reg		[60, 40, 30, 20, 10]
    157 	0x002   CACR    Cache Control Register          [60, 40, 30, 20, mcf]
    158 	0x003	TC	MMU Translation Control		[60, 40]
    159 	0x004	ITT0	Instruction Transparent
    160 				Translation reg 0	[60, 40]
    161 	0x005	ITT1	Instruction Transparent
    162 				Translation reg 1	[60, 40]
    163 	0x006	DTT0	Data Transparent
    164 				Translation reg 0	[60, 40]
    165 	0x007	DTT1	Data Transparent
    166 				Translation reg 1	[60, 40]
    167 	0x008	BUSCR	Bus Control Register		[60]
    168 	0x800	USP	User Stack Pointer		[60, 40, 30, 20, 10]
    169         0x801   VBR     Vector Base reg                 [60, 40, 30, 20, 10, mcf]
    170 	0x802	CAAR	Cache Address Register		[        30, 20]
    171 	0x803	MSP	Master Stack Pointer		[    40, 30, 20]
    172 	0x804	ISP	Interrupt Stack Pointer		[    40, 30, 20]
    173 	0x805	MMUSR	MMU Status reg			[    40]
    174 	0x806	URP	User Root Pointer		[60, 40]
    175 	0x807	SRP	Supervisor Root Pointer		[60, 40]
    176 	0x808	PCR	Processor Configuration reg	[60]
    177 	0xC00	ROMBAR	ROM Base Address Register	[520X]
    178 	0xC04	RAMBAR0	RAM Base Address Register 0	[520X]
    179 	0xC05	RAMBAR1	RAM Base Address Register 0	[520X]
    180 	0xC0F	MBAR0	RAM Base Address Register 0	[520X]
    181         0xC04   FLASHBAR FLASH Base Address Register    [mcf528x]
    182         0xC05   RAMBAR  Static RAM Base Address Register [mcf528x]
    183 
    184     L  Register list of the type d0-d7/a0-a7 etc.
    185        (New!  Improved!  Can also hold fp0-fp7, as well!)
    186        The assembler tries to see if the registers match the insn by
    187        looking at where the insn wants them stored.
    188 
    189     l  Register list like L, but with all the bits reversed.
    190        Used for going the other way. . .
    191 
    192     c  cache identifier which may be "nc" for no cache, "ic"
    193        for instruction cache, "dc" for data cache, or "bc"
    194        for both caches.  Used in cinv and cpush.  Always
    195        stored in position "d".
    196 
    197     u  Any register, with ``upper'' or ``lower'' specification.  Used
    198        in the mac instructions with size word.
    199 
    200  The remainder are all stored as 6 bits using an address mode and a
    201  register number; they differ in which addressing modes they match.
    202 
    203    *  all					(modes 0-6,7.0-4)
    204    ~  alterable memory				(modes 2-6,7.0,7.1)
    205    						(not 0,1,7.2-4)
    206    %  alterable					(modes 0-6,7.0,7.1)
    207 						(not 7.2-4)
    208    ;  data					(modes 0,2-6,7.0-4)
    209 						(not 1)
    210    @  data, but not immediate			(modes 0,2-6,7.0-3)
    211 						(not 1,7.4)
    212    !  control					(modes 2,5,6,7.0-3)
    213 						(not 0,1,3,4,7.4)
    214    &  alterable control				(modes 2,5,6,7.0,7.1)
    215 						(not 0,1,3,4,7.2-4)
    216    $  alterable data				(modes 0,2-6,7.0,7.1)
    217 						(not 1,7.2-4)
    218    ?  alterable control, or data register	(modes 0,2,5,6,7.0,7.1)
    219 						(not 1,3,4,7.2-4)
    220    /  control, or data register			(modes 0,2,5,6,7.0-3)
    221 						(not 1,3,4,7.4)
    222    >  *save operands				(modes 2,4,5,6,7.0,7.1)
    223 						(not 0,1,3,7.2-4)
    224    <  *restore operands				(modes 2,3,5,6,7.0-3)
    225 						(not 0,1,4,7.4)
    226 
    227    coldfire move operands:
    228    m  						(modes 0-4)
    229    n						(modes 5,7.2)
    230    o						(modes 6,7.0,7.1,7.3,7.4)
    231    p						(modes 0-5)
    232 
    233    coldfire bset/bclr/btst/mulsl/mulul operands:
    234    q						(modes 0,2-5)
    235    v						(modes 0,2-5,7.0,7.1)
    236    b                                            (modes 0,2-5,7.2)
    237    w                                            (modes 2-5,7.2)
    238    y						(modes 2,5)
    239    z						(modes 2,5,7.2)
    240    x  mov3q immediate operand.
    241    j  coprocessor ET operand.
    242    K  coprocessor command number.
    243    4						(modes 2,3,4,5)
    244   */
    245 
    246 /* For the 68851:  */
    247 /* I didn't use much imagination in choosing the
    248    following codes, so many of them aren't very
    249    mnemonic. -rab
    250 
    251    0  32 bit pmmu register
    252 	Possible values:
    253 	000	TC	Translation Control Register (68030, 68851)
    254 
    255    1  16 bit pmmu register
    256 	111	AC	Access Control (68851)
    257 
    258    2  8 bit pmmu register
    259 	100	CAL	Current Access Level (68851)
    260 	101	VAL	Validate Access Level (68851)
    261 	110	SCC	Stack Change Control (68851)
    262 
    263    3  68030-only pmmu registers (32 bit)
    264 	010	TT0	Transparent Translation reg 0
    265 			(aka Access Control reg 0 -- AC0 -- on 68ec030)
    266 	011	TT1	Transparent Translation reg 1
    267 			(aka Access Control reg 1 -- AC1 -- on 68ec030)
    268 
    269    W  wide pmmu registers
    270 	Possible values:
    271 	001	DRP	Dma Root Pointer (68851)
    272 	010	SRP	Supervisor Root Pointer (68030, 68851)
    273 	011	CRP	Cpu Root Pointer (68030, 68851)
    274 
    275    f	function code register (68030, 68851)
    276 	0	SFC
    277 	1	DFC
    278 
    279    V	VAL register only (68851)
    280 
    281    X	BADx, BACx (16 bit)
    282 	100	BAD	Breakpoint Acknowledge Data (68851)
    283 	101	BAC	Breakpoint Acknowledge Control (68851)
    284 
    285    Y	PSR (68851) (MMUSR on 68030) (ACUSR on 68ec030)
    286    Z	PCSR (68851)
    287 
    288    |	memory 		(modes 2-6, 7.*)
    289 
    290    t  address test level (68030 only)
    291       Stored as 3 bits, range 0-7.
    292       Also used for breakpoint instruction now.
    293 
    294 */
    295 
    296 /* Places to put an operand, for non-general operands:
    297    Characters used: BbCcDdFfGgHhIijkLlMmNnostWw123456789/
    298 
    299    s  source, low bits of first word.
    300    d  dest, shifted 9 in first word
    301    1  second word, shifted 12
    302    2  second word, shifted 6
    303    3  second word, shifted 0
    304    4  third word, shifted 12
    305    5  third word, shifted 6
    306    6  third word, shifted 0
    307    7  second word, shifted 7
    308    8  second word, shifted 10
    309    9  second word, shifted 5
    310    E  second word, shifted 9
    311    D  store in both place 1 and place 3; for divul and divsl.
    312    B  first word, low byte, for branch displacements
    313    W  second word (entire), for branch displacements
    314    L  second and third words (entire), for branch displacements
    315       (also overloaded for move16)
    316    b  second word, low byte
    317    w  second word (entire) [variable word/long branch offset for dbra]
    318    W  second word (entire) (must be signed 16 bit value)
    319    l  second and third word (entire)
    320    g  variable branch offset for bra and similar instructions.
    321       The place to store depends on the magnitude of offset.
    322    t  store in both place 7 and place 8; for floating point operations
    323    c  branch offset for cpBcc operations.
    324       The place to store is word two if bit six of word one is zero,
    325       and words two and three if bit six of word one is one.
    326    i  Increment by two, to skip over coprocessor extended operands.   Only
    327       works with the 'I' format.
    328    k  Dynamic K-factor field.   Bits 6-4 of word 2, used as a register number.
    329       Also used for dynamic fmovem instruction.
    330    C  floating point coprocessor constant - 7 bits.  Also used for static
    331       K-factors...
    332    j  Movec register #, stored in 12 low bits of second word.
    333    m  For M[S]ACx; 4 bits split with MSB shifted 6 bits in first word
    334       and remaining 3 bits of register shifted 9 bits in first word.
    335       Indicate upper/lower in 1 bit shifted 7 bits in second word.
    336       Use with `R' or `u' format.
    337    n  `m' withouth upper/lower indication. (For M[S]ACx; 4 bits split
    338       with MSB shifted 6 bits in first word and remaining 3 bits of
    339       register shifted 9 bits in first word.  No upper/lower
    340       indication is done.)  Use with `R' or `u' format.
    341    o  For M[S]ACw; 4 bits shifted 12 in second word (like `1').
    342       Indicate upper/lower in 1 bit shifted 7 bits in second word.
    343       Use with `R' or `u' format.
    344    M  For M[S]ACw; 4 bits in low bits of first word.  Indicate
    345       upper/lower in 1 bit shifted 6 bits in second word.  Use with
    346       `R' or `u' format.
    347    N  For M[S]ACw; 4 bits in low bits of second word.  Indicate
    348       upper/lower in 1 bit shifted 6 bits in second word.  Use with
    349       `R' or `u' format.
    350    h  shift indicator (scale factor), 1 bit shifted 10 in second word
    351 
    352  Places to put operand, for general operands:
    353    d  destination, shifted 6 bits in first word
    354    b  source, at low bit of first word, and immediate uses one byte
    355    w  source, at low bit of first word, and immediate uses two bytes
    356    l  source, at low bit of first word, and immediate uses four bytes
    357    s  source, at low bit of first word.
    358       Used sometimes in contexts where immediate is not allowed anyway.
    359    f  single precision float, low bit of 1st word, immediate uses 4 bytes
    360    F  double precision float, low bit of 1st word, immediate uses 8 bytes
    361    x  extended precision float, low bit of 1st word, immediate uses 12 bytes
    362    p  packed float, low bit of 1st word, immediate uses 12 bytes
    363    G  EMAC accumulator, load  (bit 4 2nd word, !bit8 first word)
    364    H  EMAC accumulator, non load  (bit 4 2nd word, bit 8 first word)
    365    F  EMAC ACCx
    366    f  EMAC ACCy
    367    I  MAC/EMAC scale factor
    368    /  Like 's', but set 2nd word, bit 5 if trailing_ampersand set
    369    ]  first word, bit 10
    370 */
    371 
    372 extern const struct m68k_opcode m68k_opcodes[];
    373 extern const struct m68k_opcode_alias m68k_opcode_aliases[];
    374 
    375 extern const int m68k_numopcodes, m68k_numaliases;
    376 
    377 /* end of m68k-opcode.h */
    378