Lines Matching refs:TRB
27 // 6.4.6 TRB Types
69 // 6.4.5 TRB Completion Codes
125 // TRB Template
213 // 6.4.1.1 Normal TRB
214 // A Normal TRB is used in several ways; exclusively on Bulk and Interrupt Transfer Rings for normal and
241 // 6.4.1.2.1 Setup Stage TRB
242 // A Setup Stage TRB is created by system software to initiate a USB Setup packet on a control endpoint.
267 // 6.4.1.2.2 Data Stage TRB
268 // A Data Stage TRB is used generate the Data stage transaction of a USB Control transfer.
293 // 6.4.1.2.2 Data Stage TRB
294 // A Data Stage TRB is used generate the Data stage transaction of a USB Control transfer.
315 // 6.4.2.1 Transfer Event TRB
316 // A Transfer Event provides the completion status associated with a Transfer TRB. Refer to section 4.11.3.1
338 // 6.4.2.2 Command Completion Event TRB
339 // A Command Completion Event TRB shall be generated by the xHC when a command completes on the
363 } TRB;
366 // 6.4.3.1 No Op Command TRB
367 // The No Op Command TRB provides a simple means for verifying the operation of the Command Ring
382 // 6.4.3.2 Enable Slot Command TRB
383 // The Enable Slot Command TRB causes the xHC to select an available Device Slot and return the ID of the
398 // 6.4.3.3 Disable Slot Command TRB
399 // The Disable Slot Command TRB releases any bandwidth assigned to the disabled slot and frees any
415 // 6.4.3.4 Address Device Command TRB
416 // The Address Device Command TRB transitions the selected Device Context from the Default to the
436 // 6.4.3.5 Configure Endpoint Command TRB
437 // The Configure Endpoint Command TRB evaluates the bandwidth and resource requirements of the
456 // 6.4.3.6 Evaluate Context Command TRB
457 // The Evaluate Context Command TRB is used by system software to inform the xHC that the selected
476 // 6.4.3.7 Reset Endpoint Command TRB
477 // The Reset Endpoint Command TRB is used by system software to reset a specified Transfer Ring
494 // 6.4.3.8 Stop Endpoint Command TRB
495 TRB command allows software to stop the xHC execution of the TDs on a
513 // 6.4.3.9 Set TR Dequeue Pointer Command TRB
514 // The Set TR Dequeue Pointer Command TRB is used by system software to modify the TR Dequeue
534 // 6.4.4.1 Link TRB
535 // A Link TRB provides support for non-contiguous TRB Rings.
1195 Create a transfer TRB.
1198 @param Urb The urb used to construct the transfer TRB.
1200 @return Created TRB or NULL
1228 @param TrbNum The number of TRB in the ring.
1244 @param NewEvtTrb The new event TRB found.
1246 @retval EFI_SUCCESS Found a new event TRB at the event ring.
