1 /* src/config.h. Generated from config.h.in by configure. */ 2 /* src/config.h.in. Generated from configure.ac by autoheader. */ 3 4 /* PCRE2 is written in Standard C, but there are a few non-standard things it 5 can cope with, allowing it to run on SunOS4 and other "close to standard" 6 systems. 7 8 In environments that support the GNU autotools, config.h.in is converted into 9 config.h by the "configure" script. In environments that use CMake, 10 config-cmake.in is converted into config.h. If you are going to build PCRE2 "by 11 hand" without using "configure" or CMake, you should copy the distributed 12 config.h.generic to config.h, and edit the macro definitions to be the way you 13 need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, 14 so that config.h is included at the start of every source. 15 16 Alternatively, you can avoid editing by using -D on the compiler command line 17 to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, 18 but if you do, default values will be taken from config.h for non-boolean 19 macros that are not defined on the command line. 20 21 Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined 22 (conventionally to 1) for TRUE, and not defined at all for FALSE. All such 23 macros are listed as a commented #undef in config.h.generic. Macros such as 24 MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are 25 surrounded by #ifndef/#endif lines so that the value can be overridden by -D. 26 27 PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if 28 HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make 29 sure both macros are undefined; an emulation function will then be used. */ 30 31 /* By default, the \R escape sequence matches any Unicode line ending 32 character or sequence of characters. If BSR_ANYCRLF is defined (to any 33 value), this is changed so that backslash-R matches only CR, LF, or CRLF. 34 The build-time default can be overridden by the user of PCRE2 at runtime. 35 */ 36 /* #undef BSR_ANYCRLF */ 37 38 /* If you are compiling for a system that uses EBCDIC instead of ASCII 39 character codes, define this macro to any value. When EBCDIC is set, PCRE2 40 assumes that all input strings are in EBCDIC. If you do not define this 41 macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It 42 is not possible to build a version of PCRE2 that supports both EBCDIC and 43 UTF-8/16/32. */ 44 /* #undef EBCDIC */ 45 46 /* In an EBCDIC environment, define this macro to any value to arrange for the 47 NL character to be 0x25 instead of the default 0x15. NL plays the role that 48 LF does in an ASCII/Unicode environment. */ 49 /* #undef EBCDIC_NL25 */ 50 51 /* Define to 1 if you have the `bcopy' function. */ 52 #define HAVE_BCOPY 1 53 54 /* Define to 1 if you have the <bzlib.h> header file. */ 55 /* #undef HAVE_BZLIB_H */ 56 57 /* Define to 1 if you have the <dirent.h> header file. */ 58 #define HAVE_DIRENT_H 1 59 60 /* Define to 1 if you have the <dlfcn.h> header file. */ 61 #define HAVE_DLFCN_H 1 62 63 /* Define to 1 if you have the <editline/readline.h> header file. */ 64 /* #undef HAVE_EDITLINE_READLINE_H */ 65 66 /* Define to 1 if you have the <edit/readline/readline.h> header file. */ 67 /* #undef HAVE_EDIT_READLINE_READLINE_H */ 68 69 /* Define to 1 if you have the <inttypes.h> header file. */ 70 #define HAVE_INTTYPES_H 1 71 72 /* Define to 1 if you have the <limits.h> header file. */ 73 #define HAVE_LIMITS_H 1 74 75 /* Define to 1 if you have the `memmove' function. */ 76 #define HAVE_MEMMOVE 1 77 78 /* Define to 1 if you have the <memory.h> header file. */ 79 #define HAVE_MEMORY_H 1 80 81 /* Define if you have POSIX threads libraries and header files. */ 82 /* #undef HAVE_PTHREAD */ 83 84 /* Have PTHREAD_PRIO_INHERIT. */ 85 /* #undef HAVE_PTHREAD_PRIO_INHERIT */ 86 87 /* Define to 1 if you have the <readline/history.h> header file. */ 88 /* #undef HAVE_READLINE_HISTORY_H */ 89 90 /* Define to 1 if you have the <readline/readline.h> header file. */ 91 /* #undef HAVE_READLINE_READLINE_H */ 92 93 /* Define to 1 if you have the <stdint.h> header file. */ 94 #define HAVE_STDINT_H 1 95 96 /* Define to 1 if you have the <stdlib.h> header file. */ 97 #define HAVE_STDLIB_H 1 98 99 /* Define to 1 if you have the `strerror' function. */ 100 #define HAVE_STRERROR 1 101 102 /* Define to 1 if you have the <strings.h> header file. */ 103 #define HAVE_STRINGS_H 1 104 105 /* Define to 1 if you have the <string.h> header file. */ 106 #define HAVE_STRING_H 1 107 108 /* Define to 1 if you have the <sys/stat.h> header file. */ 109 #define HAVE_SYS_STAT_H 1 110 111 /* Define to 1 if you have the <sys/types.h> header file. */ 112 #define HAVE_SYS_TYPES_H 1 113 114 /* Define to 1 if you have the <unistd.h> header file. */ 115 #define HAVE_UNISTD_H 1 116 117 /* Define to 1 if the compiler supports simple visibility declarations. */ 118 #define HAVE_VISIBILITY 1 119 120 /* Define to 1 if you have the <windows.h> header file. */ 121 /* #undef HAVE_WINDOWS_H */ 122 123 /* Define to 1 if you have the <zlib.h> header file. */ 124 #define HAVE_ZLIB_H 1 125 126 /* PCRE2 uses recursive function calls to handle backtracking while matching. 127 This can sometimes be a problem on systems that have stacks of limited 128 size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't 129 use recursion in the match() function; instead it creates its own stack by 130 steam using memory from the heap. For more detail, see the comments and 131 other stuff just above the match() function. */ 132 /* #undef HEAP_MATCH_RECURSE */ 133 134 /* The value of LINK_SIZE determines the number of bytes used to store links 135 as offsets within the compiled regex. The default is 2, which allows for 136 compiled patterns up to 64K long. This covers the vast majority of cases. 137 However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This 138 allows for longer patterns in extreme cases. */ 139 #ifndef LINK_SIZE 140 #define LINK_SIZE 2 141 #endif 142 143 /* Define to the sub-directory where libtool stores uninstalled libraries. */ 144 /* This is ignored unless you are using libtool. */ 145 #ifndef LT_OBJDIR 146 #define LT_OBJDIR ".libs/" 147 #endif 148 149 /* The value of MATCH_LIMIT determines the default number of times the 150 internal match() function can be called during a single execution of 151 pcre2_match(). There is a runtime interface for setting a different limit. 152 The limit exists in order to catch runaway regular expressions that take 153 for ever to determine that they do not match. The default is set very large 154 so that it does not accidentally catch legitimate cases. */ 155 #ifndef MATCH_LIMIT 156 #define MATCH_LIMIT 10000000 157 #endif 158 159 /* The above limit applies to all calls of match(), whether or not they 160 increase the recursion depth. In some environments it is desirable to limit 161 the depth of recursive calls of match() more strictly, in order to restrict 162 the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined) 163 that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive 164 calls of match(). To have any useful effect, it must be less than the value 165 of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There 166 is a runtime method for setting a different limit. */ 167 #ifndef MATCH_LIMIT_RECURSION 168 #define MATCH_LIMIT_RECURSION MATCH_LIMIT 169 #endif 170 171 /* This limit is parameterized just in case anybody ever wants to change it. 172 Care must be taken if it is increased, because it guards against integer 173 overflow caused by enormously large patterns. */ 174 #ifndef MAX_NAME_COUNT 175 #define MAX_NAME_COUNT 10000 176 #endif 177 178 /* This limit is parameterized just in case anybody ever wants to change it. 179 Care must be taken if it is increased, because it guards against integer 180 overflow caused by enormously large patterns. */ 181 #ifndef MAX_NAME_SIZE 182 #define MAX_NAME_SIZE 32 183 #endif 184 185 /* Defining NEVER_BACKSLASH_C locks out the use of \C in all patterns. */ 186 /* #undef NEVER_BACKSLASH_C */ 187 188 /* The value of NEWLINE_DEFAULT determines the default newline character 189 sequence. PCRE2 client programs can override this by selecting other values 190 at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5 191 (ANYCRLF). */ 192 #ifndef NEWLINE_DEFAULT 193 #define NEWLINE_DEFAULT 2 194 #endif 195 196 /* Name of package */ 197 #define PACKAGE "pcre2" 198 199 /* Define to the address where bug reports for this package should be sent. */ 200 #define PACKAGE_BUGREPORT "" 201 202 /* Define to the full name of this package. */ 203 #define PACKAGE_NAME "PCRE2" 204 205 /* Define to the full name and version of this package. */ 206 #define PACKAGE_STRING "PCRE2 10.21" 207 208 /* Define to the one symbol short name of this package. */ 209 #define PACKAGE_TARNAME "pcre2" 210 211 /* Define to the home page for this package. */ 212 #define PACKAGE_URL "" 213 214 /* Define to the version of this package. */ 215 #define PACKAGE_VERSION "10.21" 216 217 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested 218 parentheses (of any kind) in a pattern. This limits the amount of system 219 stack that is used while compiling a pattern. */ 220 #ifndef PARENS_NEST_LIMIT 221 #define PARENS_NEST_LIMIT 250 222 #endif 223 224 /* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by 225 pcre2grep to hold parts of the file it is searching. This is also the 226 minimum value. The actual amount of memory used by pcre2grep is three times 227 this number, because it allows for the buffering of "before" and "after" 228 lines. */ 229 #ifndef PCRE2GREP_BUFSIZE 230 #define PCRE2GREP_BUFSIZE 20480 231 #endif 232 233 /* Define to any value to include debugging code. */ 234 /* #undef PCRE2_DEBUG */ 235 236 /* If you are compiling for a system other than a Unix-like system or 237 Win32, and it needs some magic to be inserted before the definition 238 of a function that is exported by the library, define this macro to 239 contain the relevant magic. If you do not define this macro, a suitable 240 __declspec value is used for Windows systems; in other environments 241 "extern" is used for a C compiler and "extern C" for a C++ compiler. 242 This macro apears at the start of every exported function that is part 243 of the external API. It does not appear on functions that are "external" 244 in the C sense, but which are internal to the library. */ 245 /* #undef PCRE2_EXP_DEFN */ 246 247 /* Define to any value if linking statically (TODO: make nice with Libtool) */ 248 /* #undef PCRE2_STATIC */ 249 250 /* Define to necessary symbol if this constant uses a non-standard name on 251 your system. */ 252 /* #undef PTHREAD_CREATE_JOINABLE */ 253 254 /* Define to 1 if you have the ANSI C header files. */ 255 #define STDC_HEADERS 1 256 257 /* Define to any value to enable support for Just-In-Time compiling. */ 258 /* #undef SUPPORT_JIT */ 259 260 /* Define to any value to allow pcre2grep to be linked with libbz2, so that it 261 is able to handle .bz2 files. */ 262 /* #undef SUPPORT_LIBBZ2 */ 263 264 /* Define to any value to allow pcre2test to be linked with libedit. */ 265 /* #undef SUPPORT_LIBEDIT */ 266 267 /* Define to any value to allow pcre2test to be linked with libreadline. */ 268 /* #undef SUPPORT_LIBREADLINE */ 269 270 /* Define to any value to allow pcre2grep to be linked with libz, so that it 271 is able to handle .gz files. */ 272 /* #undef SUPPORT_LIBZ */ 273 274 /* Define to any value to enable JIT support in pcre2grep. */ 275 /* #undef SUPPORT_PCRE2GREP_JIT */ 276 277 /* Define to any value to enable the 16 bit PCRE2 library. */ 278 /* #undef SUPPORT_PCRE2_16 */ 279 280 /* Define to any value to enable the 32 bit PCRE2 library. */ 281 /* #undef SUPPORT_PCRE2_32 */ 282 283 /* Define to any value to enable the 8 bit PCRE2 library. */ 284 #define SUPPORT_PCRE2_8 1 285 286 /* Define to any value to enable support for Unicode and UTF encoding. This 287 will work even in an EBCDIC environment, but it is incompatible with the 288 EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or* 289 ASCII/Unicode, but not both at once. */ 290 /* #undef SUPPORT_UNICODE */ 291 292 /* Define to any value for valgrind support to find invalid memory reads. */ 293 /* #undef SUPPORT_VALGRIND */ 294 295 /* Version number of package */ 296 #define VERSION "10.21" 297 298 /* Define to empty if `const' does not conform to ANSI C. */ 299 /* #undef const */ 300 301 /* Define to the type of a signed integer type of width exactly 64 bits if 302 such a type exists and the standard includes do not define it. */ 303 /* #undef int64_t */ 304 305 /* Define to `unsigned int' if <sys/types.h> does not define. */ 306 /* #undef size_t */ 307