/device/linaro/bootloader/edk2/ArmPlatformPkg/Include/Drivers/ |
SP804Timer.h | 51 #define SP810_SYS_CTRL_TIMER1_EN BIT18
|
/device/linaro/bootloader/OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Include/Omap3530/ |
Omap3530Dma.h | 63 #define DMA4_CSDP_DST_ENDIAN_LOCK_LOCK BIT18
79 #define DMA4_CCR_FS_BLOCK (0 | BIT18)
81 #define DMA4_CCR_FS_PACKET (BIT5 | BIT18)
|
Omap3530MMCHS.h | 129 #define CEB_EN BIT18
144 #define CEB_SIGEN BIT18
|
/device/linaro/bootloader/edk2/Omap35xxPkg/Include/Omap3530/ |
Omap3530Dma.h | 63 #define DMA4_CSDP_DST_ENDIAN_LOCK_LOCK BIT18
79 #define DMA4_CCR_FS_BLOCK (0 | BIT18)
81 #define DMA4_CCR_FS_PACKET (BIT5 | BIT18)
|
Omap3530MMCHS.h | 129 #define CEB_EN BIT18
144 #define CEB_SIGEN BIT18
|
/device/linaro/bootloader/edk2/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/ |
PchRegsPcie.h | 76 #define B_PCH_PCIE_SLCTL_SLSTS_MSC BIT18 // MRL Sensor Changed
|
PchRegsPcu.h | [all...] |
/device/linaro/bootloader/edk2/QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/ |
general_definitions.h | 35 #undef BIT18
71 #define BIT18 0x00040000U
|
meminit.c | 558 isbM32m(DDRPHY, (B01LATCTL1 + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), tempD, ((BIT28|BIT27|BIT26|BIT25|BIT24)|(BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT12|BIT11|BIT10|BIT9|BIT8)|(BIT4|BIT3|BIT2|BIT1|BIT0))); // Launch Time: ODT, DIFFAMP, ODT, DIFFAMP
566 isbM32m(DDRPHY, (B0ONDURCTL + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), tempD, ((BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT13|BIT12|BIT11|BIT10|BIT9|BIT8))); // On Duration: ODT, DIFFAMP
567 isbM32m(DDRPHY, (B1ONDURCTL + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), tempD, ((BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT13|BIT12|BIT11|BIT10|BIT9|BIT8))); // On Duration: ODT, DIFFAMP
573 isbM32m(DDRPHY, (B0OVRCTL + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), tempD, ((BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT15|BIT14|BIT13|BIT12|BIT11|BIT10))); // Override: DIFFAMP, ODT
574 isbM32m(DDRPHY, (B1OVRCTL + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), tempD, ((BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT15|BIT14|BIT13|BIT12|BIT11|BIT10))); // Override: DIFFAMP, ODT
578 isbM32m(DDRPHY, (B0LATCTL0 + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), (((tCAS+7)<<16)|((tCAS-4)<<8)|((tCWL-2)<<0)), ((BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT12|BIT11|BIT10|BIT9|BIT8)|(BIT4|BIT3|BIT2|BIT1|BIT0))); // 1xCLK: tEDP, RCVEN, WDQS
579 isbM32m(DDRPHY, (B1LATCTL0 + (bl_grp_i * DDRIODQ_BL_OFFSET) + (channel_i * DDRIODQ_CH_OFFSET)), (((tCAS+7)<<16)|((tCAS-4)<<8)|((tCWL-2)<<0)), ((BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT12|BIT11|BIT10|BIT9|BIT8)|(BIT4|BIT3|BIT2|BIT1|BIT0))); // 1xCLK: tEDP, RCVEN, WDQS
603 isbM32m(DDRPHY, (CMDPMDLYREG4 + (channel_i * DDRIOCCC_CH_OFFSET)), ((0xFFFFU<<16)|(0xFFFF<<0)), ((BIT31|BIT30|BIT29|BIT28|BIT27|BIT26|BIT25|BIT24|BIT23|BIT22|BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT15|BIT14|BIT13|BIT12|BIT11|BIT10|BIT9|BIT8|BIT7|BIT6|BIT5|BIT4|BIT3|BIT2|BIT1|BIT0))); // Turn On Delays: SFR (regulator), MPLL
604 isbM32m(DDRPHY, (CMDPMDLYREG3 + (channel_i * DDRIOCCC_CH_OFFSET)), ((0xFU<<28)|(0xFFF<<16)|(0xF<<12)|(0x616<<0)), ((BIT31|BIT30|BIT29|BIT28)|(BIT27|BIT26|BIT25|BIT24|BIT23|BIT22|BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT15|BIT14|BIT13|BIT12)|(BIT11|BIT10|BIT9|BIT8|BIT7|BIT6|BIT5|BIT4|BIT3|BIT2|BIT1|BIT0))); // Delays: ASSERT_IOBUFACT_to_ALLON0_for_PM_MSG_3, VREG (MDLL) Turn On, ALLON0_to_DEASSERT_IOBUFACT_for_PM_MSG_gt0, MDLL Turn On
605 isbM32m(DDRPHY, (CMDPMDLYREG2 + (channel_i * DDRIOCCC_CH_OFFSET)), ((0xFFU<<24)|(0xFF<<16)|(0xFF<<8)|(0xFF<<0)), ((BIT31|BIT30|BIT29|BIT28|BIT27|BIT26|BIT25|BIT24)|(BIT23|BIT22|BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)|(BIT15|BIT14|BIT13|BIT12|BIT11|BIT10|BIT9|BIT8)|(BIT7|BIT6|BIT5|BIT4|BIT3|BIT2|BIT1|B (…) [all...] |
/device/linaro/bootloader/edk2/OvmfPkg/Include/IndustryStandard/ |
VirtioNet.h | 59 #define VIRTIO_NET_F_CTRL_RX BIT18 // control channel RX mode support
|
/device/linaro/bootloader/edk2/Vlv2TbltDevicePkg/Include/Guid/ |
BoardFeatures.h | 62 #define B_BOARD_FEATURES_FORM_FACTOR_MASK (BIT15|BIT16|BIT17|BIT18|BIT19)
66 #define B_BOARD_FEATURES_FORM_FACTOR_MICRO_ATX BIT18
156 #define B_BOARD_FEATURES_FORM_FACTOR_MASK (BIT15|BIT16|BIT17|BIT18|BIT19|BIT20)
160 #define B_BOARD_FEATURES_FORM_FACTOR_MICRO_ATX BIT18
|
/device/linaro/bootloader/edk2/Vlv2TbltDevicePkg/Include/ |
CommonIncludes.h | 98 #define BIT18 0x00040000
|
/device/linaro/bootloader/edk2/EmbeddedPkg/Drivers/Lan9118Dxe/ |
Lan9118DxeHw.h | 116 #define INSTS_PHY_INT BIT18 // Indicates PHY Interrupt
212 #define MACCR_PRMS BIT18 // Promiscuous Mode bit
258 #define GPIO_GPIO2_PUSH_PULL BIT18
|
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ |
AhciMode.h | 20 #define EFI_AHCI_CAP_SAM BIT18
130 #define EFI_AHCI_PORT_CMD_HPCP BIT18
171 #define EFI_AHCI_PORT_SERR_CW BIT18
|
/device/linaro/bootloader/edk2/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/ |
PchRegs.h | 64 #define BIT18 0x00040000
|
/device/linaro/bootloader/edk2/QuarkSocPkg/QuarkNorthCluster/Include/ |
QuarkNcSocId.h | 149 #define B_WDT_CONTROL_DBL_ECC_BIT_ERR_MASK (BIT19 | BIT18)
234 #define NON_HOST_SMM_WR_OPEN (BIT18) // SMM Writes OPEN
295 #define B_TSCGF1_CONFIG_IBGCHOPEN BIT18
322 #define SOCCLKEN_CONFIG_SBI_BB_RST_B BIT18
657 #define B_QNC_PCIE_LCAP_CPM (BIT18) //clock power management supported
[all...] |
/device/linaro/bootloader/edk2/ArmPlatformPkg/Drivers/PL180MciDxe/ |
PL180Mci.h | 101 #define MCI_STATUS_CMD_TXFIFOEMPTY BIT18
|
/device/linaro/bootloader/edk2/BaseTools/Source/C/Include/Common/ |
BaseTypes.h | 239 #define BIT18 0x00040000
|
/system/bt/embdrv/sbc/decoder/include/ |
oi_stddefs.h | 277 #define BIT18 \
|
/bionic/libc/kernel/uapi/linux/ |
synclink.h | 41 #define BIT18 0x00040000
|
/development/ndk/platforms/android-21/include/linux/ |
synclink.h | 46 #define BIT18 0x00040000
|
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/XhciDxe/ |
XhciReg.h | 175 #define XHC_PORTSC_PEC BIT18 // Port Enabled/Disabled Change
|
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/XhciPei/ |
XhciReg.h | 90 #define XHC_PORTSC_PEC BIT18 // Port Enabled/Disabled Change
|
/device/linaro/bootloader/edk2/QuarkSocPkg/QuarkSouthCluster/Include/ |
Ioh.h | 47 #define BIT18 0x00040000
|
/external/kernel-headers/original/uapi/linux/ |
synclink.h | 36 #define BIT18 0x00040000
|