Lines Matching refs:Hz
88 * [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
109 * SHOULD report events up to at least 200 Hz.
148 * [C-1-2] MUST be able to report events up to a frequency of at least 10 Hz
149 and SHOULD report events up to at least 50 Hz.
186 * SHOULD consume less than 3 mW when the sensor is registered for batch mode at 10 Hz.
197 * [C-1-1] MUST support location outputs at a rate of at least 1 Hz when
275 * [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
285 * [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz
286 (variance per Hz, or rad^2 / s). The variance is allowed to vary with the
288 measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater
294 * SHOULD report events up to at least 200 Hz.
317 * [C-1-2] MUST be able to deliver events at 5 Hz or greater.
376 * MUST have a minimum measurement frequency of 12.5 Hz or lower.
377 * MUST have a maximum measurement frequency of 400 Hz or higher.
378 * MUST have a measurement noise not above 400 uG/?Hz.
382 * SHOULD have a stationary noise bias stability of \<15 ?g ?Hz from 24hr static
396 * MUST have a minimum measurement frequency of 12.5 Hz or lower.
397 * MUST have a maximum measurement frequency of 400 Hz or higher.
398 * MUST have a measurement noise not above 0.014°/s/?Hz.
399 * SHOULD have a stationary bias stability of < 0.0002 °/s ?Hz from 24-hour static dataset.
403 * SHOULD have a noise density of ? 0.007 °/s/?Hz.
414 * MUST have a minimum measurement frequency of 5 Hz or lower.
415 * MUST have a maximum measurement frequency of 50 Hz or higher.
426 * MUST have a minimum measurement frequency of 1 Hz or lower.
427 * MUST have a maximum measurement frequency of 10 Hz or higher.
428 * MUST have a measurement noise not above 2 Pa/?Hz.
