Lines Matching full:sata
2 This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.
349 // Sub Class (offset 0x0A). This controller should be an SATA controller
419 // Allocate Sata Private Data structure
428 // Initialize Sata Private Data
593 // Close protocols opened by Sata Controller driver
607 SATA controller that attaches the device for
611 @param[in] Channel The channel (ie. port) number on the SATA
646 For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
647 controllers, this value will always be 1. SATA configurations can contain SATA
648 port multipliers. SATA port multipliers behave like SATA bridges and can support
649 up to 16 devices on the other side. If a SATA port out of the IDE controller
650 is connected to a port multiplier, MaxDevices will be set to the number of SATA
652 support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
653 bus driver is required to scan for the presence of port multipliers behind an SATA
666 one or two. For Serial ATA (SATA) configurations with a
832 For Serial ATA (SATA) controllers, this member function can be used to disqualify
835 for a certain SATA drive.
914 The IDE controller driver for a Serial ATA (SATA) controller can use this
1023 (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
