Lines Matching full:sata
2 This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.
349 // Sub Class (offset 0x0A). This controller should be an SATA controller
434 // Allocate Sata Private Data structure
443 // Initialize Sata Private Data
632 // Close protocols opened by Sata Controller driver
646 SATA controller that attaches the device for
650 @param[in] Channel The channel (ie. port) number on the SATA
685 For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
686 controllers, this value will always be 1. SATA configurations can contain SATA
687 port multipliers. SATA port multipliers behave like SATA bridges and can support
688 up to 16 devices on the other side. If a SATA port out of the IDE controller
689 is connected to a port multiplier, MaxDevices will be set to the number of SATA
691 support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
692 bus driver is required to scan for the presence of port multipliers behind an SATA
705 one or two. For Serial ATA (SATA) configurations with a
871 For Serial ATA (SATA) controllers, this member function can be used to disqualify
874 for a certain SATA drive.
953 The IDE controller driver for a Serial ATA (SATA) controller can use this
1062 (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
