Lines Matching refs:network
19 # file whenever configuration is changed (e.g., new network block is added with
26 # global configuration (shared by all network blocks)
46 # possible to run wpa_supplicant as root (since it needs to change network
49 # change the network configuration, this access needs to be protected in many
95 # the currently enabled networks are found, a new network (IBSS or AP mode
105 # the network blocks in the configuration file are tried one by one until
106 # the driver reports successful association; each network block should have
111 # For finding networks using hidden SSID, scan_ssid=1 in the network block can
113 # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
116 # networks are found, a new IBSS or AP mode network is created.
119 # Whether to force passive scan for network connection
128 # for network connection cases. It should be noted that this will slow
195 # loaded here before being used in the network blocks. By default, EAP methods
260 # 6-0050F204-1 (Network Infrastructure / AP)
302 # This priority value will be set to each network profile that is added
363 # with the global okc=1 parameter or with the per-network
365 # can be disabled with per-network proactive_key_caching=0 parameter.
371 # the global pmf=1/2 parameter or with the per-network ieee80211w=1/2 parameter.
373 # per-network ieee80211w parameter. This global default value does not apply
386 # Default value for DTIM period (if not overridden in network block)
389 # Default value for Beacon interval (if not overridden in network block)
418 # the per-network mac_addr parameter. Global mac_addr=1 can be used to
448 # P2P GO Interworking: Access Network Type
449 # 0 = Private network
450 # 1 = Private network with guest access
451 # 2 = Chargeable public network
452 # 3 = Free public network
453 # 4 = Personal device network
454 # 5 = Emergency services only network
459 # P2P GO Interworking: Whether the network provides connectivity to the Internet
461 # 1 = Network provides connectivity to the Internet
481 # Automatic network selection behavior
482 # 0 = do not automatically go through Interworking network selection
484 # 1 = perform Interworking network selection if one or more
486 # matching network block
513 # Each credential used for automatic network selection is configured as a set
524 # (and similarly in struct wpa_ssid for network blocks) to change the
526 # network (based on either an enabled network block or a credential)
533 # username: Username for Interworking network selection
535 # password: Password for Interworking network selection
537 # ca_cert: CA certificate for Interworking network selection
596 # Consortium to match the network, the EAP parameters need to be
613 # matching with the network. Multiple entries can be used to specify more
642 # This value is used as the maximum channel utilization for network
650 # a roaming network shall support (include explicitly in Connection
653 # network connection. This policy is not used in home networks.
742 # network block
744 # Each network (usually AP's sharing the same SSID) is configured as a separate
745 # block in this configuration file. The network blocks are in preference order
748 # network block fields:
751 # 0 = this network can be used (default)
752 # 1 = this network block is disabled (can be enabled through ctrl_iface,
755 # id_str: Network identifier string for external scripts. This value is passed
757 # variable to make it easier to do network specific configuration.
759 # ssid: SSID (mandatory); network name in one of the optional formats:
770 # bssid: BSSID (optional); if set, this network block is used only when
778 # priority value, the sooner the network is matched against the scan results).
792 # deprecated. WPA-None requires following network block options:
800 # an IBSS network with the configured SSID is already present, the frequency of
801 # the network will be used instead of this configured value.
811 # P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in IEEE 802.11ad network.
816 # BSS. If the subset of channels used by the network is known, this option can
817 # be used to optimize scanning to not occur on channels that the network does
825 # This can also be set on the outside of the network block. In this case,
832 # single network block with all the APs using the same SSID). The bgscan
839 # learn - Learn channels used by the network and try to avoid bgscans on other
847 # This option can also be set outside of all network blocks for the bgscan
894 # LEAP = LEAP/Network EAP (only used with LEAP)
1231 # small enough to make the EAP messages fit in MTU of the network
1398 network={
1406 network={
1414 network={
1425 network={
1437 network={
1454 network={
1468 network={
1481 network={
1494 network={
1512 network={
1524 network={
1531 network={
1541 network={
1554 network={
1568 network={
1577 network={
1586 network={
1597 network={
1609 network={
1616 network={
1629 network={
1641 # IBSS/ad-hoc network with RSN
1642 network={
1653 # IBSS/ad-hoc network with WPA-None/TKIP (deprecated)
1654 network={
1665 # open mesh network
1666 network={
1673 # secure (SAE + AMPE) network
1674 network={
1684 network={
1702 network={
1723 network={
1741 network={
1746 # for this network.
1747 network={
1755 network={
1763 network={
1769 #network={
