1 /** @file 2 3 Provides some data struct used by EHCI controller driver. 4 5 Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> 6 This program and the accompanying materials 7 are licensed and made available under the terms and conditions of the BSD License 8 which accompanies this distribution. The full text of the license may be found at 9 http://opensource.org/licenses/bsd-license.php 10 11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 13 14 **/ 15 16 #ifndef _EFI_EHCI_H_ 17 #define _EFI_EHCI_H_ 18 19 20 #include <Uefi.h> 21 22 #include <Protocol/Usb2HostController.h> 23 #include <Protocol/PciIo.h> 24 25 #include <Guid/EventGroup.h> 26 27 #include <Library/DebugLib.h> 28 #include <Library/BaseMemoryLib.h> 29 #include <Library/UefiDriverEntryPoint.h> 30 #include <Library/UefiBootServicesTableLib.h> 31 #include <Library/UefiLib.h> 32 #include <Library/BaseLib.h> 33 #include <Library/MemoryAllocationLib.h> 34 #include <Library/PcdLib.h> 35 #include <Library/ReportStatusCodeLib.h> 36 37 #include <IndustryStandard/Pci.h> 38 39 typedef struct _USB2_HC_DEV USB2_HC_DEV; 40 41 #include "UsbHcMem.h" 42 #include "EhciReg.h" 43 #include "EhciUrb.h" 44 #include "EhciSched.h" 45 #include "EhciDebug.h" 46 #include "ComponentName.h" 47 48 // 49 // EHC timeout experience values 50 // 51 52 #define EHC_1_MICROSECOND 1 53 #define EHC_1_MILLISECOND (1000 * EHC_1_MICROSECOND) 54 #define EHC_1_SECOND (1000 * EHC_1_MILLISECOND) 55 56 // 57 // EHCI register operation timeout, set by experience 58 // 59 #define EHC_RESET_TIMEOUT (1 * EHC_1_SECOND) 60 #define EHC_GENERIC_TIMEOUT (10 * EHC_1_MILLISECOND) 61 62 // 63 // Wait for roothub port power stable, refers to Spec[EHCI1.0-2.3.9] 64 // 65 #define EHC_ROOT_PORT_RECOVERY_STALL (20 * EHC_1_MILLISECOND) 66 67 // 68 // Sync and Async transfer polling interval, set by experience, 69 // and the unit of Async is 100us, means 1ms as interval. 70 // 71 #define EHC_SYNC_POLL_INTERVAL (1 * EHC_1_MILLISECOND) 72 #define EHC_ASYNC_POLL_INTERVAL EFI_TIMER_PERIOD_MILLISECONDS(1) 73 74 // 75 // EHCI debug port control status register bit definition 76 // 77 #define USB_DEBUG_PORT_IN_USE BIT10 78 #define USB_DEBUG_PORT_ENABLE BIT28 79 #define USB_DEBUG_PORT_OWNER BIT30 80 81 // 82 // EHC raises TPL to TPL_NOTIFY to serialize all its operations 83 // to protect shared data structures. 84 // 85 #define EHC_TPL TPL_NOTIFY 86 87 // 88 //Iterate through the double linked list. NOT delete safe 89 // 90 #define EFI_LIST_FOR_EACH(Entry, ListHead) \ 91 for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink) 92 93 // 94 //Iterate through the double linked list. This is delete-safe. 95 //Don't touch NextEntry 96 // 97 #define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \ 98 for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\ 99 Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink) 100 101 #define EFI_LIST_CONTAINER(Entry, Type, Field) BASE_CR(Entry, Type, Field) 102 103 104 #define EHC_LOW_32BIT(Addr64) ((UINT32)(((UINTN)(Addr64)) & 0XFFFFFFFF)) 105 #define EHC_HIGH_32BIT(Addr64) ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF)) 106 #define EHC_BIT_IS_SET(Data, Bit) ((BOOLEAN)(((Data) & (Bit)) == (Bit))) 107 108 #define EHC_REG_BIT_IS_SET(Ehc, Offset, Bit) \ 109 (EHC_BIT_IS_SET(EhcReadOpReg ((Ehc), (Offset)), (Bit))) 110 111 #define USB2_HC_DEV_SIGNATURE SIGNATURE_32 ('e', 'h', 'c', 'i') 112 #define EHC_FROM_THIS(a) CR(a, USB2_HC_DEV, Usb2Hc, USB2_HC_DEV_SIGNATURE) 113 114 struct _USB2_HC_DEV { 115 UINTN Signature; 116 EFI_USB2_HC_PROTOCOL Usb2Hc; 117 118 EFI_PCI_IO_PROTOCOL *PciIo; 119 EFI_DEVICE_PATH_PROTOCOL *DevicePath; 120 UINT64 OriginalPciAttributes; 121 USBHC_MEM_POOL *MemPool; 122 123 // 124 // Schedule data shared between asynchronous and periodic 125 // transfers: 126 // ShortReadStop, as its name indicates, is used to terminate 127 // the short read except the control transfer. EHCI follows 128 // the alternative next QTD point when a short read happens. 129 // For control transfer, even the short read happens, try the 130 // status stage. 131 // 132 EHC_QTD *ShortReadStop; 133 EFI_EVENT PollTimer; 134 135 // 136 // ExitBootServicesEvent is used to stop the EHC DMA operation 137 // after exit boot service. 138 // 139 EFI_EVENT ExitBootServiceEvent; 140 141 // 142 // Asynchronous(bulk and control) transfer schedule data: 143 // ReclaimHead is used as the head of the asynchronous transfer 144 // list. It acts as the reclamation header. 145 // 146 EHC_QH *ReclaimHead; 147 148 // 149 // Periodic (interrupt) transfer schedule data: 150 // 151 VOID *PeriodFrame; // the buffer pointed by this pointer is used to store pci bus address of the QH descriptor. 152 VOID *PeriodFrameHost; // the buffer pointed by this pointer is used to store host memory address of the QH descriptor. 153 VOID *PeriodFrameMap; 154 155 EHC_QH *PeriodOne; 156 LIST_ENTRY AsyncIntTransfers; 157 158 // 159 // EHCI configuration data 160 // 161 UINT32 HcStructParams; // Cache of HC structure parameter, EHC_HCSPARAMS_OFFSET 162 UINT32 HcCapParams; // Cache of HC capability parameter, HCCPARAMS 163 UINT32 CapLen; // Capability length 164 165 // 166 // Misc 167 // 168 EFI_UNICODE_STRING_TABLE *ControllerNameTable; 169 170 // 171 // EHCI debug port info 172 // 173 UINT16 DebugPortOffset; // The offset of debug port mmio register 174 UINT8 DebugPortBarNum; // The bar number of debug port mmio register 175 UINT8 DebugPortNum; // The port number of usb debug port 176 177 BOOLEAN Support64BitDma; // Whether 64 bit DMA may be used with this device 178 }; 179 180 181 extern EFI_DRIVER_BINDING_PROTOCOL gEhciDriverBinding; 182 extern EFI_COMPONENT_NAME_PROTOCOL gEhciComponentName; 183 extern EFI_COMPONENT_NAME2_PROTOCOL gEhciComponentName2; 184 185 /** 186 Test to see if this driver supports ControllerHandle. Any 187 ControllerHandle that has Usb2HcProtocol installed will 188 be supported. 189 190 @param This Protocol instance pointer. 191 @param Controller Handle of device to test. 192 @param RemainingDevicePath Not used. 193 194 @return EFI_SUCCESS This driver supports this device. 195 @return EFI_UNSUPPORTED This driver does not support this device. 196 197 **/ 198 EFI_STATUS 199 EFIAPI 200 EhcDriverBindingSupported ( 201 IN EFI_DRIVER_BINDING_PROTOCOL *This, 202 IN EFI_HANDLE Controller, 203 IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath 204 ); 205 206 /** 207 Starting the Usb EHCI Driver. 208 209 @param This Protocol instance pointer. 210 @param Controller Handle of device to test. 211 @param RemainingDevicePath Not used. 212 213 @return EFI_SUCCESS supports this device. 214 @return EFI_UNSUPPORTED do not support this device. 215 @return EFI_DEVICE_ERROR cannot be started due to device Error. 216 @return EFI_OUT_OF_RESOURCES cannot allocate resources. 217 218 **/ 219 EFI_STATUS 220 EFIAPI 221 EhcDriverBindingStart ( 222 IN EFI_DRIVER_BINDING_PROTOCOL *This, 223 IN EFI_HANDLE Controller, 224 IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath 225 ); 226 227 /** 228 Stop this driver on ControllerHandle. Support stopping any child handles 229 created by this driver. 230 231 @param This Protocol instance pointer. 232 @param Controller Handle of device to stop driver on. 233 @param NumberOfChildren Number of Children in the ChildHandleBuffer. 234 @param ChildHandleBuffer List of handles for the children we need to stop. 235 236 @return EFI_SUCCESS Success. 237 @return EFI_DEVICE_ERROR Fail. 238 239 **/ 240 EFI_STATUS 241 EFIAPI 242 EhcDriverBindingStop ( 243 IN EFI_DRIVER_BINDING_PROTOCOL *This, 244 IN EFI_HANDLE Controller, 245 IN UINTN NumberOfChildren, 246 IN EFI_HANDLE *ChildHandleBuffer 247 ); 248 249 #endif 250 251
