1 /* 2 * Copyright (C) 2017 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef ESE_HW_API_H_ 18 #define ESE_HW_API_H_ 1 19 20 #include "ese_sg.h" 21 #include "../../../libese-sysdeps/include/ese/sysdeps.h" 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 /* 27 * Pulls the hardware declarations in to scope for the current file 28 * to make use of. 29 */ 30 #define __ESE_INCLUDE_HW(name) \ 31 extern const struct EseOperations * name## _ops 32 33 34 struct EseInterface; 35 36 /* ese_hw_receive_op_t: receives a buffer from the hardware. 37 * Args: 38 * - struct EseInterface *: session handle. 39 * - uint8_t *: pointer to the buffer to receive data into. 40 * - uint32_t: maximum length of the data to receive. 41 * - int: 1 or 0 indicating if it is a complete transaction. This allows the underlying 42 * implementation to batch reads if needed by the underlying wire protocol or if 43 * the hardware needs to be signalled explicitly. 44 * 45 * Returns: 46 * - uint32_t: bytes received. 47 */ 48 typedef uint32_t (ese_hw_receive_op_t)(struct EseInterface *, uint8_t *, uint32_t, int); 49 /* ese_hw_transmit_op_t: transmits a buffer over the hardware. 50 * Args: 51 * - struct EseInterface *: session handle. 52 * - uint8_t *: pointer to the buffer to transmit. 53 * - uint32_t: length of the data to transmit. 54 * - int: 1 or 0 indicating if it is a complete transaction. 55 * 56 * Returns: 57 * - uint32_t: bytes transmitted. 58 */ 59 typedef uint32_t (ese_hw_transmit_op_t)(struct EseInterface *, const uint8_t *, uint32_t, int); 60 /* ese_hw_reset_op_t: resets the hardware in case of communication desynchronization. 61 * Args: 62 * - struct EseInterface *: session handle. 63 * 64 * Returns: 65 * - int: -1 on error, 0 on success. 66 */ 67 typedef int (ese_hw_reset_op_t)(struct EseInterface *); 68 /* ese_transceive_sg_op_t: fully contained transmission and receive operation. 69 * 70 * Must provide an implementation of the wire protocol necessary to transmit 71 * and receive an application payload to and from the eSE. Normally, this 72 * implementation is built on the hw_{receive,transmit} operations also 73 * provided and often requires the poll operation below. 74 * 75 * Args: 76 * - struct EseInterface *: session handle. 77 * - const EseSgBuffer *: array of buffers to transmit 78 * - uint32_t: number of buffers to send 79 * - const EseSgBuffer *: array of buffers to receive into 80 * - uint32_t: number of buffers to receive to 81 * 82 * Returns: 83 * - uint32_t: bytes received. 84 */ 85 typedef uint32_t (ese_transceive_op_t)( 86 struct EseInterface *, const struct EseSgBuffer *, uint32_t, struct EseSgBuffer *, uint32_t); 87 /* ese_poll_op_t: waits for the hardware to be ready to send data. 88 * 89 * Args: 90 * - struct EseInterface *: session handle. 91 * - uint8_t: byte to wait for. E.g., a start of frame byte. 92 * - float: time in seconds to wait. 93 * - int: whether to complete a transaction when polling s complete. 94 * 95 * Returns: 96 * - int: On error or timeout, -1. 97 * On success, 1 or 0 depending on if the found byte was consumed. 98 */ 99 typedef int (ese_poll_op_t)(struct EseInterface *, uint8_t, float, int); 100 /* ese_hw_open_op_t: prepares the hardware for use. 101 * 102 * This function should prepare the hardware for use and attach 103 * any implementation specific state to the EseInterface handle such 104 * that it is accessible in the other calls. 105 * 106 * Args: 107 * - struct EseInterface *: freshly initialized session handle. 108 * - void *: implementation specific pointer from the libese client. 109 * 110 * Returns: 111 * - int: < 0 on error, 0 on success. 112 */ 113 typedef int (ese_open_op_t)(struct EseInterface *, void *); 114 /* ese_hw_close_op_t: releases the hardware in use. 115 * 116 * This function should free any dynamic memory and release 117 * the claimed hardware. 118 * 119 * Args: 120 * - struct EseInterface *: freshly initialized session handle. 121 * 122 * Returns: 123 * - Nothing. 124 */ 125 typedef void (ese_close_op_t)(struct EseInterface *); 126 127 #define __ESE_INITIALIZER(TYPE) \ 128 { \ 129 .ops = TYPE## _ops, \ 130 .error = { \ 131 .is_err = false, \ 132 .code = 0, \ 133 .message = NULL, \ 134 }, \ 135 .pad = { 0 }, \ 136 } 137 138 #define __ese_init(_ptr, TYPE) {\ 139 (_ptr)->ops = TYPE## _ops; \ 140 (_ptr)->pad[0] = 0; \ 141 (_ptr)->error.is_err = false; \ 142 (_ptr)->error.code = 0; \ 143 (_ptr)->error.message = (const char *)NULL; \ 144 } 145 146 struct EseOperations { 147 const char *name; 148 /* Used to prepare any implementation specific internal data and 149 * state needed for robust communication. 150 */ 151 ese_open_op_t *open; 152 /* Used to receive raw data from the ese. */ 153 ese_hw_receive_op_t *hw_receive; 154 /* Used to transmit raw data to the ese. */ 155 ese_hw_transmit_op_t *hw_transmit; 156 /* Used to perform a power reset on the device. */ 157 ese_hw_reset_op_t *hw_reset; 158 /* Wire-specific protocol polling for readiness. */ 159 ese_poll_op_t *poll; 160 /* Wire-specific protocol for transmitting and receiving 161 * application data to the eSE. By default, this may point to 162 * a generic implementation, like teq1_transceive, which uses 163 * the hw_* ops above. 164 */ 165 ese_transceive_op_t *transceive; 166 /* Cleans up any required state: file descriptors or heap allocations. */ 167 ese_close_op_t *close; 168 169 /* Operational options */ 170 const void *opts; 171 172 /* Operation error messages. */ 173 const char **errors; 174 uint32_t errors_count; 175 }; 176 177 /* Maximum private stack storage on the interface instance. */ 178 #define ESE_INTERFACE_STATE_PAD 16 179 struct EseInterface { 180 const struct EseOperations * ops; 181 struct { 182 bool is_err; 183 int code; 184 const char *message; 185 } error; 186 /* Reserved to avoid heap allocation requirement. */ 187 uint8_t pad[ESE_INTERFACE_STATE_PAD]; 188 }; 189 190 /* 191 * Provided by libese to manage exposing usable errors up the stack to the 192 * libese user. 193 */ 194 void ese_set_error(struct EseInterface *ese, int code); 195 196 /* 197 * Global error enums. 198 */ 199 enum EseGlobalError { 200 kEseGlobalErrorNoTransceive = -1, 201 kEseGlobalErrorPollTimedOut = -2, 202 }; 203 204 #define ESE_DEFINE_HW_OPS(name, obj) \ 205 const struct EseOperations * name##_ops = &obj 206 207 208 #ifdef __cplusplus 209 } /* extern "C" */ 210 #endif 211 #endif /* ESE_HW_API_H_ */ 212
