1 /** 2 Per an email message from Russ Nelson <nelson (at) crynwr.com> on 3 18 March 2008 this file is now licensed under GPL Version 2. 4 5 From: Russ Nelson <nelson (at) crynwr.com> 6 Date: Tue, 18 Mar 2008 12:42:00 -0400 7 Subject: Re: [Etherboot-developers] cs89x0 driver in etherboot 8 -- quote from email 9 As copyright holder, if I say it doesn't conflict with the GPL, 10 then it doesn't conflict with the GPL. 11 12 However, there's no point in causing people's brains to overheat, 13 so yes, I grant permission for the code to be relicensed under the 14 GPLv2. Please make sure that this change in licensing makes its 15 way upstream. -russ 16 -- quote from email 17 **/ 18 19 FILE_LICENCE ( GPL2_ONLY ); 20 21 /* Copyright, 1988-1992, Russell Nelson, Crynwr Software 22 23 This program is free software; you can redistribute it and/or modify 24 it under the terms of the GNU General Public License as published by 25 the Free Software Foundation, version 1. 26 27 This program is distributed in the hope that it will be useful, 28 but WITHOUT ANY WARRANTY; without even the implied warranty of 29 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 30 GNU General Public License for more details. 31 32 You should have received a copy of the GNU General Public License 33 along with this program; if not, write to the Free Software 34 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ 35 36 #define PP_ChipID 0x0000 /* offset 0h -> Corp -ID */ 37 /* offset 2h -> Model/Product Number */ 38 /* offset 3h -> Chip Revision Number */ 39 40 #define PP_ISAIOB 0x0020 /* IO base address */ 41 #define PP_CS8900_ISAINT 0x0022 /* ISA interrupt select */ 42 #define PP_CS8920_ISAINT 0x0370 /* ISA interrupt select */ 43 #define PP_CS8900_ISADMA 0x0024 /* ISA Rec DMA channel */ 44 #define PP_CS8920_ISADMA 0x0374 /* ISA Rec DMA channel */ 45 #define PP_ISASOF 0x0026 /* ISA DMA offset */ 46 #define PP_DmaFrameCnt 0x0028 /* ISA DMA Frame count */ 47 #define PP_DmaByteCnt 0x002A /* ISA DMA Byte count */ 48 #define PP_CS8900_ISAMemB 0x002C /* Memory base */ 49 #define PP_CS8920_ISAMemB 0x0348 /* */ 50 51 #define PP_ISABootBase 0x0030 /* Boot Prom base */ 52 #define PP_ISABootMask 0x0034 /* Boot Prom Mask */ 53 54 /* EEPROM data and command registers */ 55 #define PP_EECMD 0x0040 /* NVR Interface Command register */ 56 #define PP_EEData 0x0042 /* NVR Interface Data Register */ 57 #define PP_DebugReg 0x0044 /* Debug Register */ 58 59 #define PP_RxCFG 0x0102 /* Rx Bus config */ 60 #define PP_RxCTL 0x0104 /* Receive Control Register */ 61 #define PP_TxCFG 0x0106 /* Transmit Config Register */ 62 #define PP_TxCMD 0x0108 /* Transmit Command Register */ 63 #define PP_BufCFG 0x010A /* Bus configuration Register */ 64 #define PP_LineCTL 0x0112 /* Line Config Register */ 65 #define PP_SelfCTL 0x0114 /* Self Command Register */ 66 #define PP_BusCTL 0x0116 /* ISA bus control Register */ 67 #define PP_TestCTL 0x0118 /* Test Register */ 68 #define PP_AutoNegCTL 0x011C /* Auto Negotiation Ctrl */ 69 70 #define PP_ISQ 0x0120 /* Interrupt Status */ 71 #define PP_RxEvent 0x0124 /* Rx Event Register */ 72 #define PP_TxEvent 0x0128 /* Tx Event Register */ 73 #define PP_BufEvent 0x012C /* Bus Event Register */ 74 #define PP_RxMiss 0x0130 /* Receive Miss Count */ 75 #define PP_TxCol 0x0132 /* Transmit Collision Count */ 76 #define PP_LineST 0x0134 /* Line State Register */ 77 #define PP_SelfST 0x0136 /* Self State register */ 78 #define PP_BusST 0x0138 /* Bus Status */ 79 #define PP_TDR 0x013C /* Time Domain Reflectometry */ 80 #define PP_AutoNegST 0x013E /* Auto Neg Status */ 81 #define PP_TxCommand 0x0144 /* Tx Command */ 82 #define PP_TxLength 0x0146 /* Tx Length */ 83 #define PP_LAF 0x0150 /* Hash Table */ 84 #define PP_IA 0x0158 /* Physical Address Register */ 85 86 #define PP_RxStatus 0x0400 /* Receive start of frame */ 87 #define PP_RxLength 0x0402 /* Receive Length of frame */ 88 #define PP_RxFrame 0x0404 /* Receive frame pointer */ 89 #define PP_TxFrame 0x0A00 /* Transmit frame pointer */ 90 91 /* Primary I/O Base Address. If no I/O base is supplied by the user, then this */ 92 /* can be used as the default I/O base to access the PacketPage Area. */ 93 #define DEFAULTIOBASE 0x0300 94 #define FIRST_IO 0x020C /* First I/O port to check */ 95 #define LAST_IO 0x037C /* Last I/O port to check (+10h) */ 96 #define ADD_MASK 0x3000 /* Mask it use of the ADD_PORT register */ 97 #define ADD_SIG 0x3000 /* Expected ID signature */ 98 99 #define CHIP_EISA_ID_SIG 0x630E /* Product ID Code for Crystal Chip (CS8900 spec 4.3) */ 100 101 #ifdef IBMEIPKT 102 #define EISA_ID_SIG 0x4D24 /* IBM */ 103 #define PART_NO_SIG 0x1010 /* IBM */ 104 #define MONGOOSE_BIT 0x0000 /* IBM */ 105 #else 106 #define EISA_ID_SIG 0x630E /* PnP Vendor ID (same as chip id for Crystal board) */ 107 #define PART_NO_SIG 0x4000 /* ID code CS8920 board (PnP Vendor Product code) */ 108 #define MONGOOSE_BIT 0x2000 /* PART_NO_SIG + MONGOOSE_BUT => ID of mongoose */ 109 #endif 110 111 #define PRODUCT_ID_ADD 0x0002 /* Address of product ID */ 112 113 /* Mask to find out the types of registers */ 114 #define REG_TYPE_MASK 0x001F 115 116 /* Eeprom Commands */ 117 #define ERSE_WR_ENBL 0x00F0 118 #define ERSE_WR_DISABLE 0x0000 119 120 /* Defines Control/Config register quintuplet numbers */ 121 #define RX_BUF_CFG 0x0003 122 #define RX_CONTROL 0x0005 123 #define TX_CFG 0x0007 124 #define TX_COMMAND 0x0009 125 #define BUF_CFG 0x000B 126 #define LINE_CONTROL 0x0013 127 #define SELF_CONTROL 0x0015 128 #define BUS_CONTROL 0x0017 129 #define TEST_CONTROL 0x0019 130 131 /* Defines Status/Count registers quintuplet numbers */ 132 #define RX_EVENT 0x0004 133 #define TX_EVENT 0x0008 134 #define BUF_EVENT 0x000C 135 #define RX_MISS_COUNT 0x0010 136 #define TX_COL_COUNT 0x0012 137 #define LINE_STATUS 0x0014 138 #define SELF_STATUS 0x0016 139 #define BUS_STATUS 0x0018 140 #define TDR 0x001C 141 142 /* PP_RxCFG - Receive Configuration and Interrupt Mask bit definition - Read/write */ 143 #define SKIP_1 0x0040 144 #define RX_STREAM_ENBL 0x0080 145 #define RX_OK_ENBL 0x0100 146 #define RX_DMA_ONLY 0x0200 147 #define AUTO_RX_DMA 0x0400 148 #define BUFFER_CRC 0x0800 149 #define RX_CRC_ERROR_ENBL 0x1000 150 #define RX_RUNT_ENBL 0x2000 151 #define RX_EXTRA_DATA_ENBL 0x4000 152 153 /* PP_RxCTL - Receive Control bit definition - Read/write */ 154 #define RX_IA_HASH_ACCEPT 0x0040 155 #define RX_PROM_ACCEPT 0x0080 156 #define RX_OK_ACCEPT 0x0100 157 #define RX_MULTCAST_ACCEPT 0x0200 158 #define RX_IA_ACCEPT 0x0400 159 #define RX_BROADCAST_ACCEPT 0x0800 160 #define RX_BAD_CRC_ACCEPT 0x1000 161 #define RX_RUNT_ACCEPT 0x2000 162 #define RX_EXTRA_DATA_ACCEPT 0x4000 163 #define RX_ALL_ACCEPT (RX_PROM_ACCEPT|RX_BAD_CRC_ACCEPT|RX_RUNT_ACCEPT|RX_EXTRA_DATA_ACCEPT) 164 /* Default receive mode - individually addressed, broadcast, and error free */ 165 #define DEF_RX_ACCEPT (RX_IA_ACCEPT | RX_BROADCAST_ACCEPT | RX_OK_ACCEPT) 166 167 /* PP_TxCFG - Transmit Configuration Interrupt Mask bit definition - Read/write */ 168 #define TX_LOST_CRS_ENBL 0x0040 169 #define TX_SQE_ERROR_ENBL 0x0080 170 #define TX_OK_ENBL 0x0100 171 #define TX_LATE_COL_ENBL 0x0200 172 #define TX_JBR_ENBL 0x0400 173 #define TX_ANY_COL_ENBL 0x0800 174 #define TX_16_COL_ENBL 0x8000 175 176 /* PP_TxCMD - Transmit Command bit definition - Read-only */ 177 #define TX_START_4_BYTES 0x0000 178 #define TX_START_64_BYTES 0x0040 179 #define TX_START_128_BYTES 0x0080 180 #define TX_START_ALL_BYTES 0x00C0 181 #define TX_FORCE 0x0100 182 #define TX_ONE_COL 0x0200 183 #define TX_TWO_PART_DEFF_DISABLE 0x0400 184 #define TX_NO_CRC 0x1000 185 #define TX_RUNT 0x2000 186 187 /* PP_BufCFG - Buffer Configuration Interrupt Mask bit definition - Read/write */ 188 #define GENERATE_SW_INTERRUPT 0x0040 189 #define RX_DMA_ENBL 0x0080 190 #define READY_FOR_TX_ENBL 0x0100 191 #define TX_UNDERRUN_ENBL 0x0200 192 #define RX_MISS_ENBL 0x0400 193 #define RX_128_BYTE_ENBL 0x0800 194 #define TX_COL_COUNT_OVRFLOW_ENBL 0x1000 195 #define RX_MISS_COUNT_OVRFLOW_ENBL 0x2000 196 #define RX_DEST_MATCH_ENBL 0x8000 197 198 /* PP_LineCTL - Line Control bit definition - Read/write */ 199 #define SERIAL_RX_ON 0x0040 200 #define SERIAL_TX_ON 0x0080 201 #define AUI_ONLY 0x0100 202 #define AUTO_AUI_10BASET 0x0200 203 #define MODIFIED_BACKOFF 0x0800 204 #define NO_AUTO_POLARITY 0x1000 205 #define TWO_PART_DEFDIS 0x2000 206 #define LOW_RX_SQUELCH 0x4000 207 208 /* PP_SelfCTL - Software Self Control bit definition - Read/write */ 209 #define POWER_ON_RESET 0x0040 210 #define SW_STOP 0x0100 211 #define SLEEP_ON 0x0200 212 #define AUTO_WAKEUP 0x0400 213 #define HCB0_ENBL 0x1000 214 #define HCB1_ENBL 0x2000 215 #define HCB0 0x4000 216 #define HCB1 0x8000 217 218 /* PP_BusCTL - ISA Bus Control bit definition - Read/write */ 219 #define RESET_RX_DMA 0x0040 220 #define MEMORY_ON 0x0400 221 #define DMA_BURST_MODE 0x0800 222 #define IO_CHANNEL_READY_ON 0x1000 223 #define RX_DMA_SIZE_64K 0x2000 224 #define ENABLE_IRQ 0x8000 225 226 /* PP_TestCTL - Test Control bit definition - Read/write */ 227 #define LINK_OFF 0x0080 228 #define ENDEC_LOOPBACK 0x0200 229 #define AUI_LOOPBACK 0x0400 230 #define BACKOFF_OFF 0x0800 231 #define FAST_TEST 0x8000 232 233 /* PP_RxEvent - Receive Event Bit definition - Read-only */ 234 #define RX_IA_HASHED 0x0040 235 #define RX_DRIBBLE 0x0080 236 #define RX_OK 0x0100 237 #define RX_HASHED 0x0200 238 #define RX_IA 0x0400 239 #define RX_BROADCAST 0x0800 240 #define RX_CRC_ERROR 0x1000 241 #define RX_RUNT 0x2000 242 #define RX_EXTRA_DATA 0x4000 243 244 #define HASH_INDEX_MASK 0x0FC00 245 246 /* PP_TxEvent - Transmit Event Bit definition - Read-only */ 247 #define TX_LOST_CRS 0x0040 248 #define TX_SQE_ERROR 0x0080 249 #define TX_OK 0x0100 250 #define TX_LATE_COL 0x0200 251 #define TX_JBR 0x0400 252 #define TX_16_COL 0x8000 253 #define TX_SEND_OK_BITS (TX_OK|TX_LOST_CRS) 254 #define TX_COL_COUNT_MASK 0x7800 255 256 /* PP_BufEvent - Buffer Event Bit definition - Read-only */ 257 #define SW_INTERRUPT 0x0040 258 #define RX_DMA 0x0080 259 #define READY_FOR_TX 0x0100 260 #define TX_UNDERRUN 0x0200 261 #define RX_MISS 0x0400 262 #define RX_128_BYTE 0x0800 263 #define TX_COL_OVRFLW 0x1000 264 #define RX_MISS_OVRFLW 0x2000 265 #define RX_DEST_MATCH 0x8000 266 267 /* PP_LineST - Ethernet Line Status bit definition - Read-only */ 268 #define LINK_OK 0x0080 269 #define AUI_ON 0x0100 270 #define TENBASET_ON 0x0200 271 #define POLARITY_OK 0x1000 272 #define CRS_OK 0x4000 273 274 /* PP_SelfST - Chip Software Status bit definition */ 275 #define ACTIVE_33V 0x0040 276 #define INIT_DONE 0x0080 277 #define SI_BUSY 0x0100 278 #define EEPROM_PRESENT 0x0200 279 #define EEPROM_OK 0x0400 280 #define EL_PRESENT 0x0800 281 #define EE_SIZE_64 0x1000 282 283 /* PP_BusST - ISA Bus Status bit definition */ 284 #define TX_BID_ERROR 0x0080 285 #define READY_FOR_TX_NOW 0x0100 286 287 /* PP_AutoNegCTL - Auto Negotiation Control bit definition */ 288 #define RE_NEG_NOW 0x0040 289 #define ALLOW_FDX 0x0080 290 #define AUTO_NEG_ENABLE 0x0100 291 #define NLP_ENABLE 0x0200 292 #define FORCE_FDX 0x8000 293 #define AUTO_NEG_BITS (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE) 294 #define AUTO_NEG_MASK (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE|ALLOW_FDX|RE_NEG_NOW) 295 296 /* PP_AutoNegST - Auto Negotiation Status bit definition */ 297 #define AUTO_NEG_BUSY 0x0080 298 #define FLP_LINK 0x0100 299 #define FLP_LINK_GOOD 0x0800 300 #define LINK_FAULT 0x1000 301 #define HDX_ACTIVE 0x4000 302 #define FDX_ACTIVE 0x8000 303 304 /* The following block defines the ISQ event types */ 305 #define ISQ_RECEIVER_EVENT 0x04 306 #define ISQ_TRANSMITTER_EVENT 0x08 307 #define ISQ_BUFFER_EVENT 0x0c 308 #define ISQ_RX_MISS_EVENT 0x10 309 #define ISQ_TX_COL_EVENT 0x12 310 311 #define ISQ_EVENT_MASK 0x003F /* ISQ mask to find out type of event */ 312 #define ISQ_HIST 16 /* small history buffer */ 313 #define AUTOINCREMENT 0x8000 /* Bit mask to set bit-15 for autoincrement */ 314 315 #define TXRXBUFSIZE 0x0600 316 #define RXDMABUFSIZE 0x8000 317 #define RXDMASIZE 0x4000 318 #define TXRX_LENGTH_MASK 0x07FF 319 320 /* rx options bits */ 321 #define RCV_WITH_RXON 1 /* Set SerRx ON */ 322 #define RCV_COUNTS 2 /* Use Framecnt1 */ 323 #define RCV_PONG 4 /* Pong respondent */ 324 #define RCV_DONG 8 /* Dong operation */ 325 #define RCV_POLLING 0x10 /* Poll RxEvent */ 326 #define RCV_ISQ 0x20 /* Use ISQ, int */ 327 #define RCV_AUTO_DMA 0x100 /* Set AutoRxDMAE */ 328 #define RCV_DMA 0x200 /* Set RxDMA only */ 329 #define RCV_DMA_ALL 0x400 /* Copy all DMA'ed */ 330 #define RCV_FIXED_DATA 0x800 /* Every frame same */ 331 #define RCV_IO 0x1000 /* Use ISA IO only */ 332 #define RCV_MEMORY 0x2000 /* Use ISA Memory */ 333 334 #define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */ 335 #define PKT_START PP_TxFrame /* Start of packet RAM */ 336 337 #define RX_FRAME_PORT 0x0000 338 #define TX_FRAME_PORT RX_FRAME_PORT 339 #define TX_CMD_PORT 0x0004 340 #define TX_NOW 0x0000 /* Tx packet after 5 bytes copied */ 341 #define TX_AFTER_381 0x0020 /* Tx packet after 381 bytes copied */ 342 #define TX_AFTER_ALL 0x00C0 /* Tx packet after all bytes copied */ 343 #define TX_LEN_PORT 0x0006 344 #define ISQ_PORT 0x0008 345 #define ADD_PORT 0x000A 346 #define DATA_PORT 0x000C 347 348 #define EEPROM_WRITE_EN 0x00F0 349 #define EEPROM_WRITE_DIS 0x0000 350 #define EEPROM_WRITE_CMD 0x0100 351 #define EEPROM_READ_CMD 0x0200 352 353 /* Receive Header */ 354 /* Description of header of each packet in receive area of memory */ 355 #define RBUF_EVENT_LOW 0 /* Low byte of RxEvent - status of received frame */ 356 #define RBUF_EVENT_HIGH 1 /* High byte of RxEvent - status of received frame */ 357 #define RBUF_LEN_LOW 2 /* Length of received data - low byte */ 358 #define RBUF_LEN_HI 3 /* Length of received data - high byte */ 359 #define RBUF_HEAD_LEN 4 /* Length of this header */ 360 361 #define CHIP_READ 0x1 /* Used to mark state of the repins code (chip or dma) */ 362 #define DMA_READ 0x2 /* Used to mark state of the repins code (chip or dma) */ 363 364 /* for bios scan */ 365 /* */ 366 #ifdef CSDEBUG 367 /* use these values for debugging bios scan */ 368 #define BIOS_START_SEG 0x00000 369 #define BIOS_OFFSET_INC 0x0010 370 #else 371 #define BIOS_START_SEG 0x0c000 372 #define BIOS_OFFSET_INC 0x0200 373 #endif 374 375 #define BIOS_LAST_OFFSET 0x0fc00 376 377 /* Byte offsets into the EEPROM configuration buffer */ 378 #define ISA_CNF_OFFSET 0x6 379 #define TX_CTL_OFFSET (ISA_CNF_OFFSET + 8) /* 8900 eeprom */ 380 #define AUTO_NEG_CNF_OFFSET (ISA_CNF_OFFSET + 8) /* 8920 eeprom */ 381 382 /* the assumption here is that the bits in the eeprom are generally */ 383 /* in the same position as those in the autonegctl register. */ 384 /* Of course the IMM bit is not in that register so it must be */ 385 /* masked out */ 386 #define EE_FORCE_FDX 0x8000 387 #define EE_NLP_ENABLE 0x0200 388 #define EE_AUTO_NEG_ENABLE 0x0100 389 #define EE_ALLOW_FDX 0x0080 390 #define EE_AUTO_NEG_CNF_MASK (EE_FORCE_FDX|EE_NLP_ENABLE|EE_AUTO_NEG_ENABLE|EE_ALLOW_FDX) 391 392 #define IMM_BIT 0x0040 /* ignore missing media */ 393 394 #define ADAPTER_CNF_OFFSET (AUTO_NEG_CNF_OFFSET + 2) 395 #define A_CNF_10B_T 0x0001 396 #define A_CNF_AUI 0x0002 397 #define A_CNF_10B_2 0x0004 398 #define A_CNF_MEDIA_TYPE 0x0060 399 #define A_CNF_MEDIA_AUTO 0x0000 400 #define A_CNF_MEDIA_10B_T 0x0020 401 #define A_CNF_MEDIA_AUI 0x0040 402 #define A_CNF_MEDIA_10B_2 0x0060 403 #define A_CNF_DC_DC_POLARITY 0x0080 404 #define A_CNF_NO_AUTO_POLARITY 0x2000 405 #define A_CNF_LOW_RX_SQUELCH 0x4000 406 #define A_CNF_EXTND_10B_2 0x8000 407 408 #define PACKET_PAGE_OFFSET 0x8 409 410 /* Bit definitions for the ISA configuration word from the EEPROM */ 411 #define INT_NO_MASK 0x000F 412 #define DMA_NO_MASK 0x0070 413 #define ISA_DMA_SIZE 0x0200 414 #define ISA_AUTO_RxDMA 0x0400 415 #define ISA_RxDMA 0x0800 416 #define DMA_BURST 0x1000 417 #define STREAM_TRANSFER 0x2000 418 #define ANY_ISA_DMA (ISA_AUTO_RxDMA | ISA_RxDMA) 419 420 /* DMA controller registers */ 421 #define DMA_BASE 0x00 /* DMA controller base */ 422 #define DMA_BASE_2 0x0C0 /* DMA controller base */ 423 424 #define DMA_STAT 0x0D0 /* DMA controller status register */ 425 #define DMA_MASK 0x0D4 /* DMA controller mask register */ 426 #define DMA_MODE 0x0D6 /* DMA controller mode register */ 427 #define DMA_RESETFF 0x0D8 /* DMA controller first/last flip flop */ 428 429 /* DMA data */ 430 #define DMA_DISABLE 0x04 /* Disable channel n */ 431 #define DMA_ENABLE 0x00 /* Enable channel n */ 432 /* Demand transfers, incr. address, auto init, writes, ch. n */ 433 #define DMA_RX_MODE 0x14 434 /* Demand transfers, incr. address, auto init, reads, ch. n */ 435 #define DMA_TX_MODE 0x18 436 437 #define DMA_SIZE (16*1024) /* Size of dma buffer - 16k */ 438 439 #define CS8900 0x0000 440 #define CS8920 0x4000 441 #define CS8920M 0x6000 442 #define REVISON_BITS 0x1F00 443 #define EEVER_NUMBER 0x12 444 #define CHKSUM_LEN 0x14 445 #define CHKSUM_VAL 0x0000 446 #define START_EEPROM_DATA 0x001c /* Offset into eeprom for start of data */ 447 #define IRQ_MAP_EEPROM_DATA 0x0046 /* Offset into eeprom for the IRQ map */ 448 #define IRQ_MAP_LEN 0x0004 /* No of bytes to read for the IRQ map */ 449 #define PNP_IRQ_FRMT 0x0022 /* PNP small item IRQ format */ 450 #define CS8900_IRQ_MAP 0x1c20 /* This IRQ map is fixed */ 451 452 #define CS8920_NO_INTS 0x0F /* Max CS8920 interrupt select # */ 453 454 #define PNP_ADD_PORT 0x0279 455 #define PNP_WRITE_PORT 0x0A79 456 457 #define GET_PNP_ISA_STRUCT 0x40 458 #define PNP_ISA_STRUCT_LEN 0x06 459 #define PNP_CSN_CNT_OFF 0x01 460 #define PNP_RD_PORT_OFF 0x02 461 #define PNP_FUNCTION_OK 0x00 462 #define PNP_WAKE 0x03 463 #define PNP_RSRC_DATA 0x04 464 #define PNP_RSRC_READY 0x01 465 #define PNP_STATUS 0x05 466 #define PNP_ACTIVATE 0x30 467 #define PNP_CNF_IO_H 0x60 468 #define PNP_CNF_IO_L 0x61 469 #define PNP_CNF_INT 0x70 470 #define PNP_CNF_DMA 0x74 471 #define PNP_CNF_MEM 0x48 472 473 #define BIT0 1 474 #define BIT15 0x8000 475 476 /* 477 * Local variables: 478 * c-basic-offset: 8 479 * End: 480 */ 481 482
