1 /* This is the Assembler Pre-Processor 2 Copyright (C) 1987-2016 Free Software Foundation, Inc. 3 4 This file is part of GAS, the GNU Assembler. 5 6 GAS is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 3, or (at your option) 9 any later version. 10 11 GAS is distributed in the hope that it will be useful, but WITHOUT 12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 13 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 14 License for more details. 15 16 You should have received a copy of the GNU General Public License 17 along with GAS; see the file COPYING. If not, write to the Free 18 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 19 02110-1301, USA. */ 20 21 /* Modified by Allen Wirfs-Brock, Instantiations Inc 2/90. */ 22 /* App, the assembler pre-processor. This pre-processor strips out 23 excess spaces, turns single-quoted characters into a decimal 24 constant, and turns the # in # <number> <filename> <garbage> into a 25 .linefile. This needs better error-handling. */ 26 27 #include "as.h" 28 29 #if (__STDC__ != 1) 30 #ifndef const 31 #define const /* empty */ 32 #endif 33 #endif 34 35 #ifdef H_TICK_HEX 36 int enable_h_tick_hex = 0; 37 #endif 38 39 #ifdef TC_M68K 40 /* Whether we are scrubbing in m68k MRI mode. This is different from 41 flag_m68k_mri, because the two flags will be affected by the .mri 42 pseudo-op at different times. */ 43 static int scrub_m68k_mri; 44 45 /* The pseudo-op which switches in and out of MRI mode. See the 46 comment in do_scrub_chars. */ 47 static const char mri_pseudo[] = ".mri 0"; 48 #else 49 #define scrub_m68k_mri 0 50 #endif 51 52 #if defined TC_ARM && defined OBJ_ELF 53 /* The pseudo-op for which we need to special-case `@' characters. 54 See the comment in do_scrub_chars. */ 55 static const char symver_pseudo[] = ".symver"; 56 static const char * symver_state; 57 #endif 58 59 static char lex[256]; 60 static const char symbol_chars[] = 61 "$._ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"; 62 63 #define LEX_IS_SYMBOL_COMPONENT 1 64 #define LEX_IS_WHITESPACE 2 65 #define LEX_IS_LINE_SEPARATOR 3 66 #define LEX_IS_COMMENT_START 4 67 #define LEX_IS_LINE_COMMENT_START 5 68 #define LEX_IS_TWOCHAR_COMMENT_1ST 6 69 #define LEX_IS_STRINGQUOTE 8 70 #define LEX_IS_COLON 9 71 #define LEX_IS_NEWLINE 10 72 #define LEX_IS_ONECHAR_QUOTE 11 73 #ifdef TC_V850 74 #define LEX_IS_DOUBLEDASH_1ST 12 75 #endif 76 #ifdef TC_M32R 77 #define DOUBLEBAR_PARALLEL 78 #endif 79 #ifdef DOUBLEBAR_PARALLEL 80 #define LEX_IS_DOUBLEBAR_1ST 13 81 #endif 82 #define LEX_IS_PARALLEL_SEPARATOR 14 83 #ifdef H_TICK_HEX 84 #define LEX_IS_H 15 85 #endif 86 #define IS_SYMBOL_COMPONENT(c) (lex[c] == LEX_IS_SYMBOL_COMPONENT) 87 #define IS_WHITESPACE(c) (lex[c] == LEX_IS_WHITESPACE) 88 #define IS_LINE_SEPARATOR(c) (lex[c] == LEX_IS_LINE_SEPARATOR) 89 #define IS_PARALLEL_SEPARATOR(c) (lex[c] == LEX_IS_PARALLEL_SEPARATOR) 90 #define IS_COMMENT(c) (lex[c] == LEX_IS_COMMENT_START) 91 #define IS_LINE_COMMENT(c) (lex[c] == LEX_IS_LINE_COMMENT_START) 92 #define IS_NEWLINE(c) (lex[c] == LEX_IS_NEWLINE) 93 94 static int process_escape (int); 95 96 /* FIXME-soon: The entire lexer/parser thingy should be 97 built statically at compile time rather than dynamically 98 each and every time the assembler is run. xoxorich. */ 99 100 void 101 do_scrub_begin (int m68k_mri ATTRIBUTE_UNUSED) 102 { 103 const char *p; 104 int c; 105 106 lex[' '] = LEX_IS_WHITESPACE; 107 lex['\t'] = LEX_IS_WHITESPACE; 108 lex['\r'] = LEX_IS_WHITESPACE; 109 lex['\n'] = LEX_IS_NEWLINE; 110 lex[':'] = LEX_IS_COLON; 111 112 #ifdef TC_M68K 113 scrub_m68k_mri = m68k_mri; 114 115 if (! m68k_mri) 116 #endif 117 { 118 lex['"'] = LEX_IS_STRINGQUOTE; 119 120 #if ! defined (TC_HPPA) && ! defined (TC_I370) 121 /* I370 uses single-quotes to delimit integer, float constants. */ 122 lex['\''] = LEX_IS_ONECHAR_QUOTE; 123 #endif 124 125 #ifdef SINGLE_QUOTE_STRINGS 126 lex['\''] = LEX_IS_STRINGQUOTE; 127 #endif 128 } 129 130 /* Note: if any other character can be LEX_IS_STRINGQUOTE, the loop 131 in state 5 of do_scrub_chars must be changed. */ 132 133 /* Note that these override the previous defaults, e.g. if ';' is a 134 comment char, then it isn't a line separator. */ 135 for (p = symbol_chars; *p; ++p) 136 lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT; 137 138 for (c = 128; c < 256; ++c) 139 lex[c] = LEX_IS_SYMBOL_COMPONENT; 140 141 #ifdef tc_symbol_chars 142 /* This macro permits the processor to specify all characters which 143 may appears in an operand. This will prevent the scrubber from 144 discarding meaningful whitespace in certain cases. The i386 145 backend uses this to support prefixes, which can confuse the 146 scrubber as to whether it is parsing operands or opcodes. */ 147 for (p = tc_symbol_chars; *p; ++p) 148 lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT; 149 #endif 150 151 /* The m68k backend wants to be able to change comment_chars. */ 152 #ifndef tc_comment_chars 153 #define tc_comment_chars comment_chars 154 #endif 155 for (p = tc_comment_chars; *p; p++) 156 lex[(unsigned char) *p] = LEX_IS_COMMENT_START; 157 158 for (p = line_comment_chars; *p; p++) 159 lex[(unsigned char) *p] = LEX_IS_LINE_COMMENT_START; 160 161 #ifndef tc_line_separator_chars 162 #define tc_line_separator_chars line_separator_chars 163 #endif 164 for (p = tc_line_separator_chars; *p; p++) 165 lex[(unsigned char) *p] = LEX_IS_LINE_SEPARATOR; 166 167 #ifdef tc_parallel_separator_chars 168 /* This macro permits the processor to specify all characters which 169 separate parallel insns on the same line. */ 170 for (p = tc_parallel_separator_chars; *p; p++) 171 lex[(unsigned char) *p] = LEX_IS_PARALLEL_SEPARATOR; 172 #endif 173 174 /* Only allow slash-star comments if slash is not in use. 175 FIXME: This isn't right. We should always permit them. */ 176 if (lex['/'] == 0) 177 lex['/'] = LEX_IS_TWOCHAR_COMMENT_1ST; 178 179 #ifdef TC_M68K 180 if (m68k_mri) 181 { 182 lex['\''] = LEX_IS_STRINGQUOTE; 183 lex[';'] = LEX_IS_COMMENT_START; 184 lex['*'] = LEX_IS_LINE_COMMENT_START; 185 /* The MRI documentation says '!' is LEX_IS_COMMENT_START, but 186 then it can't be used in an expression. */ 187 lex['!'] = LEX_IS_LINE_COMMENT_START; 188 } 189 #endif 190 191 #ifdef TC_V850 192 lex['-'] = LEX_IS_DOUBLEDASH_1ST; 193 #endif 194 #ifdef DOUBLEBAR_PARALLEL 195 lex['|'] = LEX_IS_DOUBLEBAR_1ST; 196 #endif 197 #ifdef TC_D30V 198 /* Must do this is we want VLIW instruction with "->" or "<-". */ 199 lex['-'] = LEX_IS_SYMBOL_COMPONENT; 200 #endif 201 202 #ifdef H_TICK_HEX 203 if (enable_h_tick_hex) 204 { 205 lex['h'] = LEX_IS_H; 206 lex['H'] = LEX_IS_H; 207 } 208 #endif 209 } 210 211 /* Saved state of the scrubber. */ 212 static int state; 213 static int old_state; 214 static const char *out_string; 215 static char out_buf[20]; 216 static int add_newlines; 217 static char *saved_input; 218 static size_t saved_input_len; 219 static char input_buffer[32 * 1024]; 220 static const char *mri_state; 221 static char mri_last_ch; 222 223 /* Data structure for saving the state of app across #include's. Note that 224 app is called asynchronously to the parsing of the .include's, so our 225 state at the time .include is interpreted is completely unrelated. 226 That's why we have to save it all. */ 227 228 struct app_save 229 { 230 int state; 231 int old_state; 232 const char * out_string; 233 char out_buf[sizeof (out_buf)]; 234 int add_newlines; 235 char * saved_input; 236 size_t saved_input_len; 237 #ifdef TC_M68K 238 int scrub_m68k_mri; 239 #endif 240 const char * mri_state; 241 char mri_last_ch; 242 #if defined TC_ARM && defined OBJ_ELF 243 const char * symver_state; 244 #endif 245 }; 246 247 char * 248 app_push (void) 249 { 250 struct app_save *saved; 251 252 saved = XNEW (struct app_save); 253 saved->state = state; 254 saved->old_state = old_state; 255 saved->out_string = out_string; 256 memcpy (saved->out_buf, out_buf, sizeof (out_buf)); 257 saved->add_newlines = add_newlines; 258 if (saved_input == NULL) 259 saved->saved_input = NULL; 260 else 261 { 262 saved->saved_input = XNEWVEC (char, saved_input_len); 263 memcpy (saved->saved_input, saved_input, saved_input_len); 264 saved->saved_input_len = saved_input_len; 265 } 266 #ifdef TC_M68K 267 saved->scrub_m68k_mri = scrub_m68k_mri; 268 #endif 269 saved->mri_state = mri_state; 270 saved->mri_last_ch = mri_last_ch; 271 #if defined TC_ARM && defined OBJ_ELF 272 saved->symver_state = symver_state; 273 #endif 274 275 /* do_scrub_begin() is not useful, just wastes time. */ 276 277 state = 0; 278 saved_input = NULL; 279 add_newlines = 0; 280 281 return (char *) saved; 282 } 283 284 void 285 app_pop (char *arg) 286 { 287 struct app_save *saved = (struct app_save *) arg; 288 289 /* There is no do_scrub_end (). */ 290 state = saved->state; 291 old_state = saved->old_state; 292 out_string = saved->out_string; 293 memcpy (out_buf, saved->out_buf, sizeof (out_buf)); 294 add_newlines = saved->add_newlines; 295 if (saved->saved_input == NULL) 296 saved_input = NULL; 297 else 298 { 299 gas_assert (saved->saved_input_len <= sizeof (input_buffer)); 300 memcpy (input_buffer, saved->saved_input, saved->saved_input_len); 301 saved_input = input_buffer; 302 saved_input_len = saved->saved_input_len; 303 free (saved->saved_input); 304 } 305 #ifdef TC_M68K 306 scrub_m68k_mri = saved->scrub_m68k_mri; 307 #endif 308 mri_state = saved->mri_state; 309 mri_last_ch = saved->mri_last_ch; 310 #if defined TC_ARM && defined OBJ_ELF 311 symver_state = saved->symver_state; 312 #endif 313 314 free (arg); 315 } 316 317 /* @@ This assumes that \n &c are the same on host and target. This is not 318 necessarily true. */ 319 320 static int 321 process_escape (int ch) 322 { 323 switch (ch) 324 { 325 case 'b': 326 return '\b'; 327 case 'f': 328 return '\f'; 329 case 'n': 330 return '\n'; 331 case 'r': 332 return '\r'; 333 case 't': 334 return '\t'; 335 case '\'': 336 return '\''; 337 case '"': 338 return '\"'; 339 default: 340 return ch; 341 } 342 } 343 344 /* This function is called to process input characters. The GET 345 parameter is used to retrieve more input characters. GET should 346 set its parameter to point to a buffer, and return the length of 347 the buffer; it should return 0 at end of file. The scrubbed output 348 characters are put into the buffer starting at TOSTART; the TOSTART 349 buffer is TOLEN bytes in length. The function returns the number 350 of scrubbed characters put into TOSTART. This will be TOLEN unless 351 end of file was seen. This function is arranged as a state 352 machine, and saves its state so that it may return at any point. 353 This is the way the old code used to work. */ 354 355 size_t 356 do_scrub_chars (size_t (*get) (char *, size_t), char *tostart, size_t tolen) 357 { 358 char *to = tostart; 359 char *toend = tostart + tolen; 360 char *from; 361 char *fromend; 362 size_t fromlen; 363 int ch, ch2 = 0; 364 /* Character that started the string we're working on. */ 365 static char quotechar; 366 367 /*State 0: beginning of normal line 368 1: After first whitespace on line (flush more white) 369 2: After first non-white (opcode) on line (keep 1white) 370 3: after second white on line (into operands) (flush white) 371 4: after putting out a .linefile, put out digits 372 5: parsing a string, then go to old-state 373 6: putting out \ escape in a "d string. 374 7: no longer used 375 8: no longer used 376 9: After seeing symbol char in state 3 (keep 1white after symchar) 377 10: After seeing whitespace in state 9 (keep white before symchar) 378 11: After seeing a symbol character in state 0 (eg a label definition) 379 -1: output string in out_string and go to the state in old_state 380 -2: flush text until a '*' '/' is seen, then go to state old_state 381 #ifdef TC_V850 382 12: After seeing a dash, looking for a second dash as a start 383 of comment. 384 #endif 385 #ifdef DOUBLEBAR_PARALLEL 386 13: After seeing a vertical bar, looking for a second 387 vertical bar as a parallel expression separator. 388 #endif 389 #ifdef TC_PREDICATE_START_CHAR 390 14: After seeing a predicate start character at state 0, looking 391 for a predicate end character as predicate. 392 15: After seeing a predicate start character at state 1, looking 393 for a predicate end character as predicate. 394 #endif 395 #ifdef TC_Z80 396 16: After seeing an 'a' or an 'A' at the start of a symbol 397 17: After seeing an 'f' or an 'F' in state 16 398 #endif 399 */ 400 401 /* I added states 9 and 10 because the MIPS ECOFF assembler uses 402 constructs like ``.loc 1 20''. This was turning into ``.loc 403 120''. States 9 and 10 ensure that a space is never dropped in 404 between characters which could appear in an identifier. Ian 405 Taylor, ian (at) cygnus.com. 406 407 I added state 11 so that something like "Lfoo add %r25,%r26,%r27" works 408 correctly on the PA (and any other target where colons are optional). 409 Jeff Law, law (at) cs.utah.edu. 410 411 I added state 13 so that something like "cmp r1, r2 || trap #1" does not 412 get squashed into "cmp r1,r2||trap#1", with the all important space 413 between the 'trap' and the '#1' being eliminated. nickc (at) cygnus.com */ 414 415 /* This macro gets the next input character. */ 416 417 #define GET() \ 418 (from < fromend \ 419 ? * (unsigned char *) (from++) \ 420 : (saved_input = NULL, \ 421 fromlen = (*get) (input_buffer, sizeof input_buffer), \ 422 from = input_buffer, \ 423 fromend = from + fromlen, \ 424 (fromlen == 0 \ 425 ? EOF \ 426 : * (unsigned char *) (from++)))) 427 428 /* This macro pushes a character back on the input stream. */ 429 430 #define UNGET(uch) (*--from = (uch)) 431 432 /* This macro puts a character into the output buffer. If this 433 character fills the output buffer, this macro jumps to the label 434 TOFULL. We use this rather ugly approach because we need to 435 handle two different termination conditions: EOF on the input 436 stream, and a full output buffer. It would be simpler if we 437 always read in the entire input stream before processing it, but 438 I don't want to make such a significant change to the assembler's 439 memory usage. */ 440 441 #define PUT(pch) \ 442 do \ 443 { \ 444 *to++ = (pch); \ 445 if (to >= toend) \ 446 goto tofull; \ 447 } \ 448 while (0) 449 450 if (saved_input != NULL) 451 { 452 from = saved_input; 453 fromend = from + saved_input_len; 454 } 455 else 456 { 457 fromlen = (*get) (input_buffer, sizeof input_buffer); 458 if (fromlen == 0) 459 return 0; 460 from = input_buffer; 461 fromend = from + fromlen; 462 } 463 464 while (1) 465 { 466 /* The cases in this switch end with continue, in order to 467 branch back to the top of this while loop and generate the 468 next output character in the appropriate state. */ 469 switch (state) 470 { 471 case -1: 472 ch = *out_string++; 473 if (*out_string == '\0') 474 { 475 state = old_state; 476 old_state = 3; 477 } 478 PUT (ch); 479 continue; 480 481 case -2: 482 for (;;) 483 { 484 do 485 { 486 ch = GET (); 487 488 if (ch == EOF) 489 { 490 as_warn (_("end of file in comment")); 491 goto fromeof; 492 } 493 494 if (ch == '\n') 495 PUT ('\n'); 496 } 497 while (ch != '*'); 498 499 while ((ch = GET ()) == '*') 500 ; 501 502 if (ch == EOF) 503 { 504 as_warn (_("end of file in comment")); 505 goto fromeof; 506 } 507 508 if (ch == '/') 509 break; 510 511 UNGET (ch); 512 } 513 514 state = old_state; 515 UNGET (' '); 516 continue; 517 518 case 4: 519 ch = GET (); 520 if (ch == EOF) 521 goto fromeof; 522 else if (ch >= '0' && ch <= '9') 523 PUT (ch); 524 else 525 { 526 while (ch != EOF && IS_WHITESPACE (ch)) 527 ch = GET (); 528 if (ch == '"') 529 { 530 quotechar = ch; 531 state = 5; 532 old_state = 3; 533 PUT (ch); 534 } 535 else 536 { 537 while (ch != EOF && ch != '\n') 538 ch = GET (); 539 state = 0; 540 PUT (ch); 541 } 542 } 543 continue; 544 545 case 5: 546 /* We are going to copy everything up to a quote character, 547 with special handling for a backslash. We try to 548 optimize the copying in the simple case without using the 549 GET and PUT macros. */ 550 { 551 char *s; 552 ptrdiff_t len; 553 554 for (s = from; s < fromend; s++) 555 { 556 ch = *s; 557 if (ch == '\\' 558 || ch == quotechar 559 || ch == '\n') 560 break; 561 } 562 len = s - from; 563 if (len > toend - to) 564 len = toend - to; 565 if (len > 0) 566 { 567 memcpy (to, from, len); 568 to += len; 569 from += len; 570 if (to >= toend) 571 goto tofull; 572 } 573 } 574 575 ch = GET (); 576 if (ch == EOF) 577 { 578 /* This buffer is here specifically so 579 that the UNGET below will work. */ 580 static char one_char_buf[1]; 581 582 as_warn (_("end of file in string; '%c' inserted"), quotechar); 583 state = old_state; 584 from = fromend = one_char_buf + 1; 585 fromlen = 1; 586 UNGET ('\n'); 587 PUT (quotechar); 588 } 589 else if (ch == quotechar) 590 { 591 state = old_state; 592 PUT (ch); 593 } 594 #ifndef NO_STRING_ESCAPES 595 else if (ch == '\\') 596 { 597 state = 6; 598 PUT (ch); 599 } 600 #endif 601 else if (scrub_m68k_mri && ch == '\n') 602 { 603 /* Just quietly terminate the string. This permits lines like 604 bne label loop if we haven't reach end yet. */ 605 state = old_state; 606 UNGET (ch); 607 PUT ('\''); 608 } 609 else 610 { 611 PUT (ch); 612 } 613 continue; 614 615 case 6: 616 state = 5; 617 ch = GET (); 618 switch (ch) 619 { 620 /* Handle strings broken across lines, by turning '\n' into 621 '\\' and 'n'. */ 622 case '\n': 623 UNGET ('n'); 624 add_newlines++; 625 PUT ('\\'); 626 continue; 627 628 case EOF: 629 as_warn (_("end of file in string; '%c' inserted"), quotechar); 630 PUT (quotechar); 631 continue; 632 633 case '"': 634 case '\\': 635 case 'b': 636 case 'f': 637 case 'n': 638 case 'r': 639 case 't': 640 case 'v': 641 case 'x': 642 case 'X': 643 case '0': 644 case '1': 645 case '2': 646 case '3': 647 case '4': 648 case '5': 649 case '6': 650 case '7': 651 break; 652 653 default: 654 #ifdef ONLY_STANDARD_ESCAPES 655 as_warn (_("unknown escape '\\%c' in string; ignored"), ch); 656 #endif 657 break; 658 } 659 PUT (ch); 660 continue; 661 662 #ifdef DOUBLEBAR_PARALLEL 663 case 13: 664 ch = GET (); 665 if (ch != '|') 666 abort (); 667 668 /* Reset back to state 1 and pretend that we are parsing a 669 line from just after the first white space. */ 670 state = 1; 671 PUT ('|'); 672 #ifdef TC_TIC6X 673 /* "||^" is used for SPMASKed instructions. */ 674 ch = GET (); 675 if (ch == EOF) 676 goto fromeof; 677 else if (ch == '^') 678 PUT ('^'); 679 else 680 UNGET (ch); 681 #endif 682 continue; 683 #endif 684 #ifdef TC_Z80 685 case 16: 686 /* We have seen an 'a' at the start of a symbol, look for an 'f'. */ 687 ch = GET (); 688 if (ch == 'f' || ch == 'F') 689 { 690 state = 17; 691 PUT (ch); 692 } 693 else 694 { 695 state = 9; 696 break; 697 } 698 case 17: 699 /* We have seen "af" at the start of a symbol, 700 a ' here is a part of that symbol. */ 701 ch = GET (); 702 state = 9; 703 if (ch == '\'') 704 /* Change to avoid warning about unclosed string. */ 705 PUT ('`'); 706 else if (ch != EOF) 707 UNGET (ch); 708 break; 709 #endif 710 } 711 712 /* OK, we are somewhere in states 0 through 4 or 9 through 11. */ 713 714 /* flushchar: */ 715 ch = GET (); 716 717 #ifdef TC_PREDICATE_START_CHAR 718 if (ch == TC_PREDICATE_START_CHAR && (state == 0 || state == 1)) 719 { 720 state += 14; 721 PUT (ch); 722 continue; 723 } 724 else if (state == 14 || state == 15) 725 { 726 if (ch == TC_PREDICATE_END_CHAR) 727 { 728 state -= 14; 729 PUT (ch); 730 ch = GET (); 731 } 732 else 733 { 734 PUT (ch); 735 continue; 736 } 737 } 738 #endif 739 740 recycle: 741 742 #if defined TC_ARM && defined OBJ_ELF 743 /* We need to watch out for .symver directives. See the comment later 744 in this function. */ 745 if (symver_state == NULL) 746 { 747 if ((state == 0 || state == 1) && ch == symver_pseudo[0]) 748 symver_state = symver_pseudo + 1; 749 } 750 else 751 { 752 /* We advance to the next state if we find the right 753 character. */ 754 if (ch != '\0' && (*symver_state == ch)) 755 ++symver_state; 756 else if (*symver_state != '\0') 757 /* We did not get the expected character, or we didn't 758 get a valid terminating character after seeing the 759 entire pseudo-op, so we must go back to the beginning. */ 760 symver_state = NULL; 761 else 762 { 763 /* We've read the entire pseudo-op. If this is the end 764 of the line, go back to the beginning. */ 765 if (IS_NEWLINE (ch)) 766 symver_state = NULL; 767 } 768 } 769 #endif /* TC_ARM && OBJ_ELF */ 770 771 #ifdef TC_M68K 772 /* We want to have pseudo-ops which control whether we are in 773 MRI mode or not. Unfortunately, since m68k MRI mode affects 774 the scrubber, that means that we need a special purpose 775 recognizer here. */ 776 if (mri_state == NULL) 777 { 778 if ((state == 0 || state == 1) 779 && ch == mri_pseudo[0]) 780 mri_state = mri_pseudo + 1; 781 } 782 else 783 { 784 /* We advance to the next state if we find the right 785 character, or if we need a space character and we get any 786 whitespace character, or if we need a '0' and we get a 787 '1' (this is so that we only need one state to handle 788 ``.mri 0'' and ``.mri 1''). */ 789 if (ch != '\0' 790 && (*mri_state == ch 791 || (*mri_state == ' ' 792 && lex[ch] == LEX_IS_WHITESPACE) 793 || (*mri_state == '0' 794 && ch == '1'))) 795 { 796 mri_last_ch = ch; 797 ++mri_state; 798 } 799 else if (*mri_state != '\0' 800 || (lex[ch] != LEX_IS_WHITESPACE 801 && lex[ch] != LEX_IS_NEWLINE)) 802 { 803 /* We did not get the expected character, or we didn't 804 get a valid terminating character after seeing the 805 entire pseudo-op, so we must go back to the 806 beginning. */ 807 mri_state = NULL; 808 } 809 else 810 { 811 /* We've read the entire pseudo-op. mips_last_ch is 812 either '0' or '1' indicating whether to enter or 813 leave MRI mode. */ 814 do_scrub_begin (mri_last_ch == '1'); 815 mri_state = NULL; 816 817 /* We continue handling the character as usual. The 818 main gas reader must also handle the .mri pseudo-op 819 to control expression parsing and the like. */ 820 } 821 } 822 #endif 823 824 if (ch == EOF) 825 { 826 if (state != 0) 827 { 828 as_warn (_("end of file not at end of a line; newline inserted")); 829 state = 0; 830 PUT ('\n'); 831 } 832 goto fromeof; 833 } 834 835 switch (lex[ch]) 836 { 837 case LEX_IS_WHITESPACE: 838 do 839 { 840 ch = GET (); 841 } 842 while (ch != EOF && IS_WHITESPACE (ch)); 843 if (ch == EOF) 844 goto fromeof; 845 846 if (state == 0) 847 { 848 /* Preserve a single whitespace character at the 849 beginning of a line. */ 850 state = 1; 851 UNGET (ch); 852 PUT (' '); 853 break; 854 } 855 856 #ifdef KEEP_WHITE_AROUND_COLON 857 if (lex[ch] == LEX_IS_COLON) 858 { 859 /* Only keep this white if there's no white *after* the 860 colon. */ 861 ch2 = GET (); 862 if (ch2 != EOF) 863 UNGET (ch2); 864 if (!IS_WHITESPACE (ch2)) 865 { 866 state = 9; 867 UNGET (ch); 868 PUT (' '); 869 break; 870 } 871 } 872 #endif 873 if (IS_COMMENT (ch) 874 || ch == '/' 875 || IS_LINE_SEPARATOR (ch) 876 || IS_PARALLEL_SEPARATOR (ch)) 877 { 878 if (scrub_m68k_mri) 879 { 880 /* In MRI mode, we keep these spaces. */ 881 UNGET (ch); 882 PUT (' '); 883 break; 884 } 885 goto recycle; 886 } 887 888 /* If we're in state 2 or 11, we've seen a non-white 889 character followed by whitespace. If the next character 890 is ':', this is whitespace after a label name which we 891 normally must ignore. In MRI mode, though, spaces are 892 not permitted between the label and the colon. */ 893 if ((state == 2 || state == 11) 894 && lex[ch] == LEX_IS_COLON 895 && ! scrub_m68k_mri) 896 { 897 state = 1; 898 PUT (ch); 899 break; 900 } 901 902 switch (state) 903 { 904 case 1: 905 /* We can arrive here if we leave a leading whitespace 906 character at the beginning of a line. */ 907 goto recycle; 908 case 2: 909 state = 3; 910 if (to + 1 < toend) 911 { 912 /* Optimize common case by skipping UNGET/GET. */ 913 PUT (' '); /* Sp after opco */ 914 goto recycle; 915 } 916 UNGET (ch); 917 PUT (' '); 918 break; 919 case 3: 920 #ifndef TC_KEEP_OPERAND_SPACES 921 /* For TI C6X, we keep these spaces as they may separate 922 functional unit specifiers from operands. */ 923 if (scrub_m68k_mri) 924 #endif 925 { 926 /* In MRI mode, we keep these spaces. */ 927 UNGET (ch); 928 PUT (' '); 929 break; 930 } 931 goto recycle; /* Sp in operands */ 932 case 9: 933 case 10: 934 #ifndef TC_KEEP_OPERAND_SPACES 935 if (scrub_m68k_mri) 936 #endif 937 { 938 /* In MRI mode, we keep these spaces. */ 939 state = 3; 940 UNGET (ch); 941 PUT (' '); 942 break; 943 } 944 state = 10; /* Sp after symbol char */ 945 goto recycle; 946 case 11: 947 if (LABELS_WITHOUT_COLONS || flag_m68k_mri) 948 state = 1; 949 else 950 { 951 /* We know that ch is not ':', since we tested that 952 case above. Therefore this is not a label, so it 953 must be the opcode, and we've just seen the 954 whitespace after it. */ 955 state = 3; 956 } 957 UNGET (ch); 958 PUT (' '); /* Sp after label definition. */ 959 break; 960 default: 961 BAD_CASE (state); 962 } 963 break; 964 965 case LEX_IS_TWOCHAR_COMMENT_1ST: 966 ch2 = GET (); 967 if (ch2 == '*') 968 { 969 for (;;) 970 { 971 do 972 { 973 ch2 = GET (); 974 if (ch2 != EOF && IS_NEWLINE (ch2)) 975 add_newlines++; 976 } 977 while (ch2 != EOF && ch2 != '*'); 978 979 while (ch2 == '*') 980 ch2 = GET (); 981 982 if (ch2 == EOF || ch2 == '/') 983 break; 984 985 /* This UNGET will ensure that we count newlines 986 correctly. */ 987 UNGET (ch2); 988 } 989 990 if (ch2 == EOF) 991 as_warn (_("end of file in multiline comment")); 992 993 ch = ' '; 994 goto recycle; 995 } 996 #ifdef DOUBLESLASH_LINE_COMMENTS 997 else if (ch2 == '/') 998 { 999 do 1000 { 1001 ch = GET (); 1002 } 1003 while (ch != EOF && !IS_NEWLINE (ch)); 1004 if (ch == EOF) 1005 as_warn ("end of file in comment; newline inserted"); 1006 state = 0; 1007 PUT ('\n'); 1008 break; 1009 } 1010 #endif 1011 else 1012 { 1013 if (ch2 != EOF) 1014 UNGET (ch2); 1015 if (state == 9 || state == 10) 1016 state = 3; 1017 PUT (ch); 1018 } 1019 break; 1020 1021 case LEX_IS_STRINGQUOTE: 1022 quotechar = ch; 1023 if (state == 10) 1024 { 1025 /* Preserve the whitespace in foo "bar". */ 1026 UNGET (ch); 1027 state = 3; 1028 PUT (' '); 1029 1030 /* PUT didn't jump out. We could just break, but we 1031 know what will happen, so optimize a bit. */ 1032 ch = GET (); 1033 old_state = 3; 1034 } 1035 else if (state == 9) 1036 old_state = 3; 1037 else 1038 old_state = state; 1039 state = 5; 1040 PUT (ch); 1041 break; 1042 1043 #ifndef IEEE_STYLE 1044 case LEX_IS_ONECHAR_QUOTE: 1045 #ifdef H_TICK_HEX 1046 if (state == 9 && enable_h_tick_hex) 1047 { 1048 char c; 1049 1050 c = GET (); 1051 as_warn ("'%c found after symbol", c); 1052 UNGET (c); 1053 } 1054 #endif 1055 if (state == 10) 1056 { 1057 /* Preserve the whitespace in foo 'b'. */ 1058 UNGET (ch); 1059 state = 3; 1060 PUT (' '); 1061 break; 1062 } 1063 ch = GET (); 1064 if (ch == EOF) 1065 { 1066 as_warn (_("end of file after a one-character quote; \\0 inserted")); 1067 ch = 0; 1068 } 1069 if (ch == '\\') 1070 { 1071 ch = GET (); 1072 if (ch == EOF) 1073 { 1074 as_warn (_("end of file in escape character")); 1075 ch = '\\'; 1076 } 1077 else 1078 ch = process_escape (ch); 1079 } 1080 sprintf (out_buf, "%d", (int) (unsigned char) ch); 1081 1082 /* None of these 'x constants for us. We want 'x'. */ 1083 if ((ch = GET ()) != '\'') 1084 { 1085 #ifdef REQUIRE_CHAR_CLOSE_QUOTE 1086 as_warn (_("missing close quote; (assumed)")); 1087 #else 1088 if (ch != EOF) 1089 UNGET (ch); 1090 #endif 1091 } 1092 if (strlen (out_buf) == 1) 1093 { 1094 PUT (out_buf[0]); 1095 break; 1096 } 1097 if (state == 9) 1098 old_state = 3; 1099 else 1100 old_state = state; 1101 state = -1; 1102 out_string = out_buf; 1103 PUT (*out_string++); 1104 break; 1105 #endif 1106 1107 case LEX_IS_COLON: 1108 #ifdef KEEP_WHITE_AROUND_COLON 1109 state = 9; 1110 #else 1111 if (state == 9 || state == 10) 1112 state = 3; 1113 else if (state != 3) 1114 state = 1; 1115 #endif 1116 PUT (ch); 1117 break; 1118 1119 case LEX_IS_NEWLINE: 1120 /* Roll out a bunch of newlines from inside comments, etc. */ 1121 if (add_newlines) 1122 { 1123 --add_newlines; 1124 UNGET (ch); 1125 } 1126 /* Fall through. */ 1127 1128 case LEX_IS_LINE_SEPARATOR: 1129 state = 0; 1130 PUT (ch); 1131 break; 1132 1133 case LEX_IS_PARALLEL_SEPARATOR: 1134 state = 1; 1135 PUT (ch); 1136 break; 1137 1138 #ifdef TC_V850 1139 case LEX_IS_DOUBLEDASH_1ST: 1140 ch2 = GET (); 1141 if (ch2 != '-') 1142 { 1143 if (ch2 != EOF) 1144 UNGET (ch2); 1145 goto de_fault; 1146 } 1147 /* Read and skip to end of line. */ 1148 do 1149 { 1150 ch = GET (); 1151 } 1152 while (ch != EOF && ch != '\n'); 1153 1154 if (ch == EOF) 1155 as_warn (_("end of file in comment; newline inserted")); 1156 1157 state = 0; 1158 PUT ('\n'); 1159 break; 1160 #endif 1161 #ifdef DOUBLEBAR_PARALLEL 1162 case LEX_IS_DOUBLEBAR_1ST: 1163 ch2 = GET (); 1164 if (ch2 != EOF) 1165 UNGET (ch2); 1166 if (ch2 != '|') 1167 goto de_fault; 1168 1169 /* Handle '||' in two states as invoking PUT twice might 1170 result in the first one jumping out of this loop. We'd 1171 then lose track of the state and one '|' char. */ 1172 state = 13; 1173 PUT ('|'); 1174 break; 1175 #endif 1176 case LEX_IS_LINE_COMMENT_START: 1177 /* FIXME-someday: The two character comment stuff was badly 1178 thought out. On i386, we want '/' as line comment start 1179 AND we want C style comments. hence this hack. The 1180 whole lexical process should be reworked. xoxorich. */ 1181 if (ch == '/') 1182 { 1183 ch2 = GET (); 1184 if (ch2 == '*') 1185 { 1186 old_state = 3; 1187 state = -2; 1188 break; 1189 } 1190 else 1191 { 1192 UNGET (ch2); 1193 } 1194 } 1195 1196 if (state == 0 || state == 1) /* Only comment at start of line. */ 1197 { 1198 int startch; 1199 1200 startch = ch; 1201 1202 do 1203 { 1204 ch = GET (); 1205 } 1206 while (ch != EOF && IS_WHITESPACE (ch)); 1207 1208 if (ch == EOF) 1209 { 1210 as_warn (_("end of file in comment; newline inserted")); 1211 PUT ('\n'); 1212 break; 1213 } 1214 1215 if (ch < '0' || ch > '9' || state != 0 || startch != '#') 1216 { 1217 /* Not a cpp line. */ 1218 while (ch != EOF && !IS_NEWLINE (ch)) 1219 ch = GET (); 1220 if (ch == EOF) 1221 { 1222 as_warn (_("end of file in comment; newline inserted")); 1223 PUT ('\n'); 1224 } 1225 else /* IS_NEWLINE (ch) */ 1226 { 1227 /* To process non-zero add_newlines. */ 1228 UNGET (ch); 1229 } 1230 state = 0; 1231 break; 1232 } 1233 /* Looks like `# 123 "filename"' from cpp. */ 1234 UNGET (ch); 1235 old_state = 4; 1236 state = -1; 1237 if (scrub_m68k_mri) 1238 out_string = "\tlinefile "; 1239 else 1240 out_string = "\t.linefile "; 1241 PUT (*out_string++); 1242 break; 1243 } 1244 1245 #ifdef TC_D10V 1246 /* All insns end in a char for which LEX_IS_SYMBOL_COMPONENT is true. 1247 Trap is the only short insn that has a first operand that is 1248 neither register nor label. 1249 We must prevent exef0f ||trap #1 to degenerate to exef0f ||trap#1 . 1250 We can't make '#' LEX_IS_SYMBOL_COMPONENT because it is 1251 already LEX_IS_LINE_COMMENT_START. However, it is the 1252 only character in line_comment_chars for d10v, hence we 1253 can recognize it as such. */ 1254 /* An alternative approach would be to reset the state to 1 when 1255 we see '||', '<'- or '->', but that seems to be overkill. */ 1256 if (state == 10) 1257 PUT (' '); 1258 #endif 1259 /* We have a line comment character which is not at the 1260 start of a line. If this is also a normal comment 1261 character, fall through. Otherwise treat it as a default 1262 character. */ 1263 if (strchr (tc_comment_chars, ch) == NULL 1264 && (! scrub_m68k_mri 1265 || (ch != '!' && ch != '*'))) 1266 goto de_fault; 1267 if (scrub_m68k_mri 1268 && (ch == '!' || ch == '*' || ch == '#') 1269 && state != 1 1270 && state != 10) 1271 goto de_fault; 1272 /* Fall through. */ 1273 case LEX_IS_COMMENT_START: 1274 #if defined TC_ARM && defined OBJ_ELF 1275 /* On the ARM, `@' is the comment character. 1276 Unfortunately this is also a special character in ELF .symver 1277 directives (and .type, though we deal with those another way). 1278 So we check if this line is such a directive, and treat 1279 the character as default if so. This is a hack. */ 1280 if ((symver_state != NULL) && (*symver_state == 0)) 1281 goto de_fault; 1282 #endif 1283 1284 #ifdef TC_ARM 1285 /* For the ARM, care is needed not to damage occurrences of \@ 1286 by stripping the @ onwards. Yuck. */ 1287 if (to > tostart && *(to - 1) == '\\') 1288 /* Do not treat the @ as a start-of-comment. */ 1289 goto de_fault; 1290 #endif 1291 1292 #ifdef WARN_COMMENTS 1293 if (!found_comment) 1294 found_comment_file = as_where (&found_comment); 1295 #endif 1296 do 1297 { 1298 ch = GET (); 1299 } 1300 while (ch != EOF && !IS_NEWLINE (ch)); 1301 if (ch == EOF) 1302 as_warn (_("end of file in comment; newline inserted")); 1303 state = 0; 1304 PUT ('\n'); 1305 break; 1306 1307 #ifdef H_TICK_HEX 1308 case LEX_IS_H: 1309 /* Look for strings like H'[0-9A-Fa-f] and if found, replace 1310 the H' with 0x to make them gas-style hex characters. */ 1311 if (enable_h_tick_hex) 1312 { 1313 char quot; 1314 1315 quot = GET (); 1316 if (quot == '\'') 1317 { 1318 UNGET ('x'); 1319 ch = '0'; 1320 } 1321 else 1322 UNGET (quot); 1323 } 1324 /* FALL THROUGH */ 1325 #endif 1326 1327 case LEX_IS_SYMBOL_COMPONENT: 1328 if (state == 10) 1329 { 1330 /* This is a symbol character following another symbol 1331 character, with whitespace in between. We skipped 1332 the whitespace earlier, so output it now. */ 1333 UNGET (ch); 1334 state = 3; 1335 PUT (' '); 1336 break; 1337 } 1338 1339 #ifdef TC_Z80 1340 /* "af'" is a symbol containing '\''. */ 1341 if (state == 3 && (ch == 'a' || ch == 'A')) 1342 { 1343 state = 16; 1344 PUT (ch); 1345 ch = GET (); 1346 if (ch == 'f' || ch == 'F') 1347 { 1348 state = 17; 1349 PUT (ch); 1350 break; 1351 } 1352 else 1353 { 1354 state = 9; 1355 if (ch == EOF || !IS_SYMBOL_COMPONENT (ch)) 1356 { 1357 if (ch != EOF) 1358 UNGET (ch); 1359 break; 1360 } 1361 } 1362 } 1363 #endif 1364 if (state == 3) 1365 state = 9; 1366 1367 /* This is a common case. Quickly copy CH and all the 1368 following symbol component or normal characters. */ 1369 if (to + 1 < toend 1370 && mri_state == NULL 1371 #if defined TC_ARM && defined OBJ_ELF 1372 && symver_state == NULL 1373 #endif 1374 ) 1375 { 1376 char *s; 1377 ptrdiff_t len; 1378 1379 for (s = from; s < fromend; s++) 1380 { 1381 int type; 1382 1383 ch2 = *(unsigned char *) s; 1384 type = lex[ch2]; 1385 if (type != 0 1386 && type != LEX_IS_SYMBOL_COMPONENT) 1387 break; 1388 } 1389 1390 if (s > from) 1391 /* Handle the last character normally, for 1392 simplicity. */ 1393 --s; 1394 1395 len = s - from; 1396 1397 if (len > (toend - to) - 1) 1398 len = (toend - to) - 1; 1399 1400 if (len > 0) 1401 { 1402 PUT (ch); 1403 memcpy (to, from, len); 1404 to += len; 1405 from += len; 1406 if (to >= toend) 1407 goto tofull; 1408 ch = GET (); 1409 } 1410 } 1411 1412 /* Fall through. */ 1413 default: 1414 de_fault: 1415 /* Some relatively `normal' character. */ 1416 if (state == 0) 1417 { 1418 state = 11; /* Now seeing label definition. */ 1419 } 1420 else if (state == 1) 1421 { 1422 state = 2; /* Ditto. */ 1423 } 1424 else if (state == 9) 1425 { 1426 if (!IS_SYMBOL_COMPONENT (ch)) 1427 state = 3; 1428 } 1429 else if (state == 10) 1430 { 1431 if (ch == '\\') 1432 { 1433 /* Special handling for backslash: a backslash may 1434 be the beginning of a formal parameter (of a 1435 macro) following another symbol character, with 1436 whitespace in between. If that is the case, we 1437 output a space before the parameter. Strictly 1438 speaking, correct handling depends upon what the 1439 macro parameter expands into; if the parameter 1440 expands into something which does not start with 1441 an operand character, then we don't want to keep 1442 the space. We don't have enough information to 1443 make the right choice, so here we are making the 1444 choice which is more likely to be correct. */ 1445 if (to + 1 >= toend) 1446 { 1447 /* If we're near the end of the buffer, save the 1448 character for the next time round. Otherwise 1449 we'll lose our state. */ 1450 UNGET (ch); 1451 goto tofull; 1452 } 1453 *to++ = ' '; 1454 } 1455 1456 state = 3; 1457 } 1458 PUT (ch); 1459 break; 1460 } 1461 } 1462 1463 /*NOTREACHED*/ 1464 1465 fromeof: 1466 /* We have reached the end of the input. */ 1467 return to - tostart; 1468 1469 tofull: 1470 /* The output buffer is full. Save any input we have not yet 1471 processed. */ 1472 if (fromend > from) 1473 { 1474 saved_input = from; 1475 saved_input_len = fromend - from; 1476 } 1477 else 1478 saved_input = NULL; 1479 1480 return to - tostart; 1481 } 1482
