1 /* ----------------------------------------------------------------------------- 2 Software License for The Fraunhofer FDK AAC Codec Library for Android 3 4 Copyright 1995 - 2018 Fraunhofer-Gesellschaft zur Frderung der angewandten 5 Forschung e.V. All rights reserved. 6 7 1. INTRODUCTION 8 The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software 9 that implements the MPEG Advanced Audio Coding ("AAC") encoding and decoding 10 scheme for digital audio. This FDK AAC Codec software is intended to be used on 11 a wide variety of Android devices. 12 13 AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient 14 general perceptual audio codecs. AAC-ELD is considered the best-performing 15 full-bandwidth communications codec by independent studies and is widely 16 deployed. AAC has been standardized by ISO and IEC as part of the MPEG 17 specifications. 18 19 Patent licenses for necessary patent claims for the FDK AAC Codec (including 20 those of Fraunhofer) may be obtained through Via Licensing 21 (www.vialicensing.com) or through the respective patent owners individually for 22 the purpose of encoding or decoding bit streams in products that are compliant 23 with the ISO/IEC MPEG audio standards. Please note that most manufacturers of 24 Android devices already license these patent claims through Via Licensing or 25 directly from the patent owners, and therefore FDK AAC Codec software may 26 already be covered under those patent licenses when it is used for those 27 licensed purposes only. 28 29 Commercially-licensed AAC software libraries, including floating-point versions 30 with enhanced sound quality, are also available from Fraunhofer. Users are 31 encouraged to check the Fraunhofer website for additional applications 32 information and documentation. 33 34 2. COPYRIGHT LICENSE 35 36 Redistribution and use in source and binary forms, with or without modification, 37 are permitted without payment of copyright license fees provided that you 38 satisfy the following conditions: 39 40 You must retain the complete text of this software license in redistributions of 41 the FDK AAC Codec or your modifications thereto in source code form. 42 43 You must retain the complete text of this software license in the documentation 44 and/or other materials provided with redistributions of the FDK AAC Codec or 45 your modifications thereto in binary form. You must make available free of 46 charge copies of the complete source code of the FDK AAC Codec and your 47 modifications thereto to recipients of copies in binary form. 48 49 The name of Fraunhofer may not be used to endorse or promote products derived 50 from this library without prior written permission. 51 52 You may not charge copyright license fees for anyone to use, copy or distribute 53 the FDK AAC Codec software or your modifications thereto. 54 55 Your modified versions of the FDK AAC Codec must carry prominent notices stating 56 that you changed the software and the date of any change. For modified versions 57 of the FDK AAC Codec, the term "Fraunhofer FDK AAC Codec Library for Android" 58 must be replaced by the term "Third-Party Modified Version of the Fraunhofer FDK 59 AAC Codec Library for Android." 60 61 3. NO PATENT LICENSE 62 63 NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without 64 limitation the patents of Fraunhofer, ARE GRANTED BY THIS SOFTWARE LICENSE. 65 Fraunhofer provides no warranty of patent non-infringement with respect to this 66 software. 67 68 You may use this FDK AAC Codec software or modifications thereto only for 69 purposes that are authorized by appropriate patent licenses. 70 71 4. DISCLAIMER 72 73 This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright 74 holders and contributors "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, 75 including but not limited to the implied warranties of merchantability and 76 fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 77 CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, 78 or consequential damages, including but not limited to procurement of substitute 79 goods or services; loss of use, data, or profits, or business interruption, 80 however caused and on any theory of liability, whether in contract, strict 81 liability, or tort (including negligence), arising in any way out of the use of 82 this software, even if advised of the possibility of such damage. 83 84 5. CONTACT INFORMATION 85 86 Fraunhofer Institute for Integrated Circuits IIS 87 Attention: Audio and Multimedia Departments - FDK AAC LL 88 Am Wolfsmantel 33 89 91058 Erlangen, Germany 90 91 www.iis.fraunhofer.de/amm 92 amm-info (at) iis.fraunhofer.de 93 ----------------------------------------------------------------------------- */ 94 95 /**************************** SBR encoder library ****************************** 96 97 Author(s): 98 99 Description: SBR encoder top level processing prototype 100 101 *******************************************************************************/ 102 103 #ifndef SBR_ENCODER_H 104 #define SBR_ENCODER_H 105 106 #include "common_fix.h" 107 #include "FDK_audio.h" 108 109 #include "FDK_bitstream.h" 110 111 /* core coder helpers */ 112 #define MAX_TRANS_FAC 8 113 #define MAX_CODEC_FRAME_RATIO 2 114 #define MAX_PAYLOAD_SIZE 256 115 116 typedef enum codecType { 117 CODEC_AAC = 0, 118 CODEC_AACLD = 1, 119 CODEC_UNSPECIFIED = 99 120 } CODEC_TYPE; 121 122 typedef struct { 123 INT bitRate; 124 INT nChannels; 125 INT sampleFreq; 126 INT transFac; 127 INT standardBitrate; 128 } CODEC_PARAM; 129 130 typedef enum { 131 SBR_MONO, 132 SBR_LEFT_RIGHT, 133 SBR_COUPLING, 134 SBR_SWITCH_LRC 135 } SBR_STEREO_MODE; 136 137 /* bitstream syntax flags */ 138 enum { 139 SBR_SYNTAX_LOW_DELAY = 0x0001, 140 SBR_SYNTAX_SCALABLE = 0x0002, 141 SBR_SYNTAX_CRC = 0x0004, 142 SBR_SYNTAX_DRM_CRC = 0x0008, 143 SBR_SYNTAX_ELD_REDUCED_DELAY = 0x0010 144 }; 145 146 typedef enum { FREQ_RES_LOW = 0, FREQ_RES_HIGH } FREQ_RES; 147 148 typedef struct { 149 CODEC_TYPE coreCoder; /*!< LC or ELD */ 150 UINT bitrateFrom; /*!< inclusive */ 151 UINT bitrateTo; /*!< exclusive */ 152 153 UINT sampleRate; /*!< */ 154 UCHAR numChannels; /*!< */ 155 156 UCHAR startFreq; /*!< bs_start_freq */ 157 UCHAR startFreqSpeech; /*!< bs_start_freq for speech config flag */ 158 UCHAR stopFreq; /*!< bs_stop_freq */ 159 UCHAR stopFreqSpeech; /*!< bs_stop_freq for speech config flag */ 160 161 UCHAR numNoiseBands; /*!< */ 162 UCHAR noiseFloorOffset; /*!< */ 163 SCHAR noiseMaxLevel; /*!< */ 164 SBR_STEREO_MODE stereoMode; /*!< */ 165 UCHAR freqScale; /*!< */ 166 } sbrTuningTable_t; 167 168 typedef struct sbrConfiguration { 169 /* 170 core coder dependent configurations 171 */ 172 CODEC_PARAM 173 codecSettings; /*!< Core coder settings. To be set from core coder. */ 174 INT SendHeaderDataTime; /*!< SBR header send update frequency in ms. */ 175 INT useWaveCoding; /*!< Flag: usage of wavecoding tool. */ 176 INT crcSbr; /*!< Flag: usage of SBR-CRC. */ 177 INT dynBwSupported; /*!< Flag: support for dynamic bandwidth in this 178 combination. */ 179 INT parametricCoding; /*!< Flag: usage of parametric coding tool. */ 180 INT downSampleFactor; /*!< Sampling rate relation between the SBR and the core 181 encoder. */ 182 FREQ_RES freq_res_fixfix[2]; /*!< Frequency resolution of envelopes in frame 183 class FIXFIX, for non-split case and split 184 case */ 185 UCHAR fResTransIsLow; /*!< Frequency resolution of envelopes in transient 186 frames: low (0) or variable (1) */ 187 188 /* 189 core coder dependent tuning parameters 190 */ 191 INT tran_thr; /*!< SBR transient detector threshold (* 100). */ 192 INT noiseFloorOffset; /*!< Noise floor offset. */ 193 UINT useSpeechConfig; /*!< Flag: adapt tuning parameters according to speech. 194 */ 195 196 /* 197 core coder independent configurations 198 */ 199 INT sbrFrameSize; /*!< SBR frame size in samples. Will be calculated from core 200 coder settings. */ 201 INT sbr_data_extra; /*!< Flag usage of data extra. */ 202 INT amp_res; /*!< Amplitude resolution. */ 203 INT ana_max_level; /*!< Noise insertion maximum level. */ 204 INT tran_fc; /*!< Transient detector start frequency. */ 205 INT tran_det_mode; /*!< Transient detector mode. */ 206 INT spread; /*!< Flag: usage of SBR spread. */ 207 INT stat; /*!< Flag: usage of static framing. */ 208 INT e; /*!< Number of envelopes when static framing is chosen. */ 209 SBR_STEREO_MODE stereoMode; /*!< SBR stereo mode. */ 210 INT deltaTAcrossFrames; /*!< Flag: allow time-delta coding. */ 211 FIXP_DBL dF_edge_1stEnv; /*!< Extra fraction delta-F coding is allowed to be 212 more expensive. */ 213 FIXP_DBL dF_edge_incr; /*!< Increment dF_edge_1stEnv this much if dT-coding 214 was used this frame. */ 215 INT sbr_invf_mode; /*!< Inverse filtering mode. */ 216 INT sbr_xpos_mode; /*!< Transposer mode. */ 217 INT sbr_xpos_ctrl; /*!< Transposer control. */ 218 INT sbr_xpos_level; /*!< Transposer 3rd order level. */ 219 INT startFreq; /*!< The start frequency table index. */ 220 INT stopFreq; /*!< The stop frequency table index. */ 221 INT useSaPan; /*!< Flag: usage of SAPAN stereo. */ 222 INT dynBwEnabled; /*!< Flag: usage of dynamic bandwidth. */ 223 INT bParametricStereo; /*!< Flag: usage of parametric stereo coding tool. */ 224 225 /* 226 header_extra1 configuration 227 */ 228 UCHAR freqScale; /*!< Frequency grouping. */ 229 INT alterScale; /*!< Scale resolution. */ 230 INT sbr_noise_bands; /*!< Number of noise bands. */ 231 232 /* 233 header_extra2 configuration 234 */ 235 INT sbr_limiter_bands; /*!< Number of limiter bands. */ 236 INT sbr_limiter_gains; /*!< Gain of limiter. */ 237 INT sbr_interpol_freq; /*!< Flag: use interpolation in freq. direction. */ 238 INT sbr_smoothing_length; /*!< Flag: choose length 4 or 0 (=on, off). */ 239 UCHAR init_amp_res_FF; 240 FIXP_DBL threshold_AmpRes_FF_m; 241 SCHAR threshold_AmpRes_FF_e; 242 } sbrConfiguration, *sbrConfigurationPtr; 243 244 typedef struct SBR_CONFIG_DATA { 245 UINT sbrSyntaxFlags; /**< SBR syntax flags derived from AOT. */ 246 INT nChannels; /**< Number of channels. */ 247 248 INT nSfb[2]; /**< Number of SBR scalefactor bands for LO_RES and HI_RES (?) */ 249 INT num_Master; /**< Number of elements in v_k_master. */ 250 INT sampleFreq; /**< SBR sampling frequency. */ 251 INT frameSize; 252 INT xOverFreq; /**< The SBR start frequency. */ 253 INT dynXOverFreq; /**< Used crossover frequency when dynamic bandwidth is 254 enabled. */ 255 256 INT noQmfBands; /**< Number of QMF frequency bands. */ 257 INT noQmfSlots; /**< Number of QMF slots. */ 258 259 UCHAR *freqBandTable[2]; /**< Frequency table for low and hires, only 260 MAX_FREQ_COEFFS/2 +1 coeffs actually needed for 261 lowres. */ 262 UCHAR 263 *v_k_master; /**< Master BandTable where freqBandTable is derived from. */ 264 265 SBR_STEREO_MODE stereoMode; 266 INT noEnvChannels; /**< Number of envelope channels. */ 267 268 INT useWaveCoding; /**< Flag indicates whether to use wave coding at all. */ 269 INT useParametricCoding; /**< Flag indicates whether to use para coding at 270 all. */ 271 INT xposCtrlSwitch; /**< Flag indicates whether to switch xpos ctrl on the 272 fly. */ 273 INT switchTransposers; /**< Flag indicates whether to switch xpos on the fly . 274 */ 275 UCHAR initAmpResFF; 276 FIXP_DBL thresholdAmpResFF_m; 277 SCHAR thresholdAmpResFF_e; 278 } SBR_CONFIG_DATA, *HANDLE_SBR_CONFIG_DATA; 279 280 typedef struct { 281 MP4_ELEMENT_ID elType; 282 INT bitRate; 283 int instanceTag; 284 UCHAR fParametricStereo; 285 UCHAR fDualMono; /**< This flags allows to disable coupling in sbr channel 286 pair element */ 287 UCHAR nChannelsInEl; 288 UCHAR ChannelIndex[2]; 289 } SBR_ELEMENT_INFO; 290 291 #ifdef __cplusplus 292 extern "C" { 293 #endif 294 295 typedef struct SBR_ENCODER *HANDLE_SBR_ENCODER; 296 297 /** 298 * \brief Get the max required input buffer size including delay balancing 299 * space for N audio channels. 300 * \param noChannels Number of audio channels. 301 * \return Max required input buffer size in bytes. 302 */ 303 INT sbrEncoder_GetInBufferSize(int noChannels); 304 305 INT sbrEncoder_Open(HANDLE_SBR_ENCODER *phSbrEncoder, INT nElements, 306 INT nChannels, INT supportPS); 307 308 /** 309 * \brief Get closest working bitrate to specified desired 310 * bitrate for a single SBR element. 311 * \param bitRate The desired target bit rate 312 * \param numChannels The amount of audio channels 313 * \param coreSampleRate The sample rate of the core coder 314 * \param aot The current Audio Object Type 315 * \return Closest working bit rate to bitRate value 316 */ 317 UINT sbrEncoder_LimitBitRate(UINT bitRate, UINT numChannels, 318 UINT coreSampleRate, AUDIO_OBJECT_TYPE aot); 319 320 /** 321 * \brief Check whether downsampled SBR single rate is possible 322 * with given audio object type. 323 * \param aot The Audio object type. 324 * \return 0 when downsampled SBR is not possible, 325 * 1 when downsampled SBR is possible. 326 */ 327 UINT sbrEncoder_IsSingleRatePossible(AUDIO_OBJECT_TYPE aot); 328 329 /** 330 * \brief Initialize SBR Encoder instance. 331 * \param phSbrEncoder Pointer to a SBR Encoder instance. 332 * \param elInfo Structure that describes the element/channel 333 * arrangement. 334 * \param noElements Amount of elements described in elInfo. 335 * \param inputBuffer Pointer to the encoder audio buffer 336 * \param inputBufferBufSize Buffer offset of one channel (frameSize + delay) 337 * \param bandwidth Returns the core audio encoder bandwidth (output) 338 * \param bufferOffset Returns the offset for the audio input data in order 339 * to do delay balancing. 340 * \param numChannels Input: Encoder input channels. output: core encoder 341 * channels. 342 * \param sampleRate Input: Encoder samplerate. output core encoder 343 * samplerate. 344 * \param downSampleFactor Input: Relation between SBR and core coder sampling 345 * rate; 346 * \param frameLength Input: Encoder frameLength. output core encoder 347 * frameLength. 348 * \param aot Input: AOT.. 349 * \param delay Input: core encoder delay. Output: total delay 350 * because of SBR. 351 * \param transformFactor The core encoder transform factor (blockswitching). 352 * \param headerPeriod Repetition rate of the SBR header: 353 * - (-1) means intern configuration. 354 * - (1-10) corresponds to header repetition rate in 355 * frames. 356 * \return 0 on success, and non-zero if failed. 357 */ 358 INT sbrEncoder_Init(HANDLE_SBR_ENCODER hSbrEncoder, 359 SBR_ELEMENT_INFO elInfo[(8)], int noElements, 360 INT_PCM *inputBuffer, UINT inputBufferBufSize, 361 INT *coreBandwidth, INT *inputBufferOffset, 362 INT *numChannels, const UINT syntaxFlags, INT *sampleRate, 363 UINT *downSampleFactor, INT *frameLength, 364 AUDIO_OBJECT_TYPE aot, int *delay, int transformFactor, 365 const int headerPeriod, ULONG statesInitFlag); 366 367 /** 368 * \brief Do delay line buffers housekeeping. To be called after 369 * each encoded audio frame. 370 * \param hEnvEnc SBR Encoder handle. 371 * \param timeBuffer Pointer to the encoder audio buffer. 372 * \param timeBufferBufSIze buffer size for one channel 373 * \return 0 on success, and non-zero if failed. 374 */ 375 INT sbrEncoder_UpdateBuffers(HANDLE_SBR_ENCODER hEnvEnc, INT_PCM *timeBuffer, 376 UINT timeBufferBufSIze); 377 378 /** 379 * \brief Close SBR encoder instance. 380 * \param phEbrEncoder Handle of SBR encoder instance to be closed. 381 * \return void 382 */ 383 void sbrEncoder_Close(HANDLE_SBR_ENCODER *phEbrEncoder); 384 385 /** 386 * \brief Encode SBR data of one complete audio frame. 387 * \param hEnvEncoder Handle of SBR encoder instance. 388 * \param samples Time samples, not interleaved. 389 * \param timeInStride Channel offset of samples buffer. 390 * \param sbrDataBits Size of SBR payload in bits. 391 * \param sbrData SBR payload. 392 * \return 0 on success, and non-zero if failed. 393 */ 394 INT sbrEncoder_EncodeFrame(HANDLE_SBR_ENCODER hEnvEncoder, INT_PCM *samples, 395 UINT samplesBufSize, UINT sbrDataBits[(8)], 396 UCHAR sbrData[(8)][MAX_PAYLOAD_SIZE]); 397 398 /** 399 * \brief Write SBR headers of one SBR element. 400 * \param sbrEncoder Handle of the SBR encoder instance. 401 * \param hBs Handle of bit stream handle to write SBR header to. 402 * \param element_index Index of the SBR element which header should be written. 403 * \param fSendHeaders Flag indicating that the SBR encoder should send more 404 * headers in the SBR payload or not. 405 * \return void 406 */ 407 void sbrEncoder_GetHeader(HANDLE_SBR_ENCODER sbrEncoder, 408 HANDLE_FDK_BITSTREAM hBs, INT element_index, 409 int fSendHeaders); 410 411 /** 412 * \brief Request to write SBR header. 413 * \param hSbrEncoder SBR encoder handle. 414 * \return 0 on success, and non-zero if failed. 415 */ 416 INT sbrEncoder_SendHeader(HANDLE_SBR_ENCODER hSbrEncoder); 417 418 /** 419 * \brief Request if last sbr payload contains an SBR header. 420 * \param hSbrEncoder SBR encoder handle. 421 * \return 1 contains sbr header, 0 without sbr header. 422 */ 423 INT sbrEncoder_ContainsHeader(HANDLE_SBR_ENCODER hSbrEncoder); 424 425 /** 426 * \brief SBR header delay in frames. 427 * \param hSbrEncoder SBR encoder handle. 428 * \return Delay in frames, -1 on failure. 429 */ 430 INT sbrEncoder_GetHeaderDelay(HANDLE_SBR_ENCODER hSbrEncoder); 431 432 /** 433 * \brief Bitstrem delay in SBR frames. 434 * \param hSbrEncoder SBR encoder handle. 435 * \return Delay in frames, -1 on failure. 436 */ 437 INT sbrEncoder_GetBsDelay(HANDLE_SBR_ENCODER hSbrEncoder); 438 439 /** 440 * \brief Prepare SBR payload for SAP. 441 * \param hSbrEncoder SBR encoder handle. 442 * \return 0 on success, and non-zero if failed. 443 */ 444 INT sbrEncoder_SAPPrepare(HANDLE_SBR_ENCODER hSbrEncoder); 445 446 /** 447 * \brief SBR encoder bitrate estimation. 448 * \param hSbrEncoder SBR encoder handle. 449 * \return Estimated bitrate. 450 */ 451 INT sbrEncoder_GetEstimateBitrate(HANDLE_SBR_ENCODER hSbrEncoder); 452 453 /** 454 * \brief Delay between input data and downsampled output data. 455 * \param hSbrEncoder SBR encoder handle. 456 * \return Delay. 457 */ 458 INT sbrEncoder_GetInputDataDelay(HANDLE_SBR_ENCODER hSbrEncoder); 459 460 /** 461 * \brief Delay caused by the SBR decoder. 462 * \param hSbrEncoder SBR encoder handle. 463 * \return Delay. 464 */ 465 INT sbrEncoder_GetSbrDecDelay(HANDLE_SBR_ENCODER hSbrEncoder); 466 467 /** 468 * \brief Get decoder library version info. 469 * \param info Pointer to an allocated LIB_INFO struct, where library info is 470 * written to. 471 * \return 0 on sucess. 472 */ 473 INT sbrEncoder_GetLibInfo(LIB_INFO *info); 474 475 void sbrPrintRAM(void); 476 477 void sbrPrintROM(void); 478 479 #ifdef __cplusplus 480 } 481 #endif 482 483 #endif /* ifndef __SBR_MAIN_H */ 484
