1 /* TI C6X opcode information. 2 Copyright (C) 2010-2016 Free Software Foundation, Inc. 3 4 This program is free software; you can redistribute it and/or modify 5 it under the terms of the GNU General Public License as published by 6 the Free Software Foundation; either version 3 of the License, or 7 (at your option) any later version. 8 9 This program is distributed in the hope that it will be useful, 10 but WITHOUT ANY WARRANTY; without even the implied warranty of 11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 GNU General Public License for more details. 13 14 You should have received a copy of the GNU General Public License 15 along with this program; if not, write to the Free Software 16 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, 17 MA 02110-1301, USA. */ 18 19 #ifndef OPCODE_TIC6X_H 20 #define OPCODE_TIC6X_H 21 22 #include "bfd.h" 23 #include "symcat.h" 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* A field in an instruction format. The names are based on those 30 used in the architecture manuals. */ 31 typedef enum 32 { 33 tic6x_field_baseR, 34 tic6x_field_cc, 35 tic6x_field_creg, 36 tic6x_field_cst, 37 tic6x_field_csta, 38 tic6x_field_cstb, 39 tic6x_field_dst, 40 tic6x_field_dstms, 41 tic6x_field_dw, 42 tic6x_field_fstgfcyc, 43 tic6x_field_h, 44 tic6x_field_ii, 45 tic6x_field_mask, 46 tic6x_field_mode, 47 tic6x_field_n, 48 tic6x_field_na, 49 tic6x_field_offsetR, 50 tic6x_field_op, 51 tic6x_field_p, 52 tic6x_field_ptr, 53 tic6x_field_r, 54 tic6x_field_s, 55 tic6x_field_sc, 56 tic6x_field_src, 57 tic6x_field_src1, 58 tic6x_field_src2, 59 tic6x_field_srcdst, 60 tic6x_field_srcms, 61 tic6x_field_sn, 62 tic6x_field_sz, 63 tic6x_field_unit, 64 tic6x_field_t, 65 tic6x_field_x, 66 tic6x_field_y, 67 tic6x_field_z 68 } tic6x_insn_field_id; 69 70 typedef struct 71 { 72 /* The least-significant bit position in the field. */ 73 unsigned short low_pos; 74 75 /* The number of bits in the field. */ 76 unsigned short width; 77 /* The position of the bitfield in the field. */ 78 unsigned short pos; 79 } tic6x_bitfield; 80 81 /* Maximum number of subfields in composite field. */ 82 #define TIC6X_MAX_BITFIELDS 4 83 84 typedef struct 85 { 86 /* The name used to reference the field. */ 87 tic6x_insn_field_id field_id; 88 unsigned int num_bitfields; 89 tic6x_bitfield bitfields[TIC6X_MAX_BITFIELDS]; 90 } tic6x_insn_field; 91 92 /* Maximum number of variable fields in an instruction format. */ 93 #define TIC6X_MAX_INSN_FIELDS 11 94 95 /* A particular instruction format. */ 96 typedef struct 97 { 98 /* How many bits in the instruction. */ 99 unsigned int num_bits; 100 101 /* Constant bits in the instruction. */ 102 unsigned int cst_bits; 103 104 /* Mask matching those bits. */ 105 unsigned int mask; 106 107 /* The number of instruction fields. */ 108 unsigned int num_fields; 109 110 /* Descriptions of instruction fields. */ 111 tic6x_insn_field fields[TIC6X_MAX_INSN_FIELDS]; 112 } tic6x_insn_format; 113 114 /* An index into the table of instruction formats. */ 115 typedef enum 116 { 117 #define FMT(name, num_bits, cst_bits, mask, fields) \ 118 CONCAT2(tic6x_insn_format_, name), 119 #include "tic6x-insn-formats.h" 120 #undef FMT 121 tic6x_insn_format_max 122 } tic6x_insn_format_id; 123 124 /* The table itself. */ 125 extern const tic6x_insn_format tic6x_insn_format_table[tic6x_insn_format_max]; 126 127 /* If instruction format FMT has a field FIELD, return a pointer to 128 the description of that field; otherwise return NULL. */ 129 130 const tic6x_insn_field *tic6x_field_from_fmt (const tic6x_insn_format *fmt, 131 tic6x_insn_field_id field); 132 133 /* Description of a field (in an instruction format) whose value is 134 fixed, or constrained to be in a particular range, in a particular 135 opcode. */ 136 typedef struct 137 { 138 /* The name of the field. */ 139 tic6x_insn_field_id field_id; 140 141 /* The least value of the field in this instruction. */ 142 unsigned int min_val; 143 144 /* The greatest value of the field in this instruction. */ 145 unsigned int max_val; 146 } tic6x_fixed_field; 147 148 /* Pseudo opcode fields position for compact instructions 149 If 16 bits instruction detected, the opcode is enriched 150 [DSZ/3][BR][SAT][opcode] */ 151 #define TIC6X_COMPACT_SAT_POS 16 152 #define TIC6X_COMPACT_BR_POS 17 153 #define TIC6X_COMPACT_DSZ_POS 18 154 155 /* Bit-masks for defining instructions present on some subset of 156 processors; each indicates an instruction present on that processor 157 and those that are supersets of it. The options passed to the 158 assembler determine a bit-mask ANDed with the bit-mask indicating 159 when the instruction was added to determine whether the instruction 160 is enabled. */ 161 #define TIC6X_INSN_C62X 0x0001 162 #define TIC6X_INSN_C64X 0x0002 163 #define TIC6X_INSN_C64XP 0x0004 164 #define TIC6X_INSN_C67X 0x0008 165 #define TIC6X_INSN_C67XP 0x0010 166 #define TIC6X_INSN_C674X 0x0020 167 168 /* Flags with further information about an opcode table entry. */ 169 170 /* Only used by the assembler, not the disassembler. */ 171 #define TIC6X_FLAG_MACRO 0x0001 172 173 /* Must be first in its execute packet. */ 174 #define TIC6X_FLAG_FIRST 0x0002 175 176 /* Multi-cycle NOP (not used for the NOP n instruction itself, which 177 is only a multicycle NOP if n > 1). */ 178 #define TIC6X_FLAG_MCNOP 0x0004 179 180 /* Cannot be in parallel with a multi-cycle NOP. */ 181 #define TIC6X_FLAG_NO_MCNOP 0x0008 182 183 /* Load instruction. */ 184 #define TIC6X_FLAG_LOAD 0x0010 185 186 /* Store instruction. */ 187 #define TIC6X_FLAG_STORE 0x0020 188 189 /* Unaligned memory operation. */ 190 #define TIC6X_FLAG_UNALIGNED 0x0040 191 192 /* Only on side B. */ 193 #define TIC6X_FLAG_SIDE_B_ONLY 0x0080 194 195 /* Only on data path T2. */ 196 #define TIC6X_FLAG_SIDE_T2_ONLY 0x0100 197 198 /* Does not support cross paths. */ 199 #define TIC6X_FLAG_NO_CROSS 0x0200 200 201 /* Annotate this branch instruction as a call. */ 202 #define TIC6X_FLAG_CALL 0x0400 203 204 /* Annotate this branch instruction as a return. */ 205 #define TIC6X_FLAG_RETURN 0x0800 206 207 /* This instruction starts a software pipelined loop. */ 208 #define TIC6X_FLAG_SPLOOP 0x1000 209 210 /* This instruction ends a software pipelined loop. */ 211 #define TIC6X_FLAG_SPKERNEL 0x2000 212 213 /* This instruction takes a list of functional units as parameters; 214 although described as having one parameter, the number may be 0 to 215 8. */ 216 #define TIC6X_FLAG_SPMASK 0x4000 217 218 /* When more than one opcode matches the assembly source, prefer the 219 one with the highest value for this bit-field. If two opcode table 220 entries can match the same syntactic form, they must have different 221 values here. */ 222 #define TIC6X_PREFER_VAL(n) (((n) & 0x8000) >> 15) 223 #define TIC6X_FLAG_PREFER(n) ((n) << 15) 224 225 /* 16 bits opcode is predicated by register a0 (s = 0) or b0 (s = 1) */ 226 #define TIC6X_FLAG_INSN16_SPRED 0x00100000 227 /* 16 bits opcode ignores RS bit of fetch packet header */ 228 #define TIC6X_FLAG_INSN16_NORS 0x00200000 229 /* 16 bits opcode only on side B */ 230 #define TIC6X_FLAG_INSN16_BSIDE 0x00400000 231 /* 16 bits opcode ptr reg is b15 */ 232 #define TIC6X_FLAG_INSN16_B15PTR 0x00800000 233 /* 16 bits opcode memory access modes */ 234 #define TIC6X_INSN16_MEM_MODE(n) ((n) << 16) 235 #define TIC6X_INSN16_MEM_MODE_VAL(n) (((n) & 0x000F0000) >> 16) 236 #define TIC6X_MEM_MODE_NEGATIVE 0 237 #define TIC6X_MEM_MODE_POSITIVE 1 238 #define TIC6X_MEM_MODE_REG_NEGATIVE 4 239 #define TIC6X_MEM_MODE_REG_POSITIVE 5 240 #define TIC6X_MEM_MODE_PREDECR 8 241 #define TIC6X_MEM_MODE_PREINCR 9 242 #define TIC6X_MEM_MODE_POSTDECR 10 243 #define TIC6X_MEM_MODE_POSTINCR 11 244 245 #define TIC6X_FLAG_INSN16_MEM_MODE(mode) TIC6X_INSN16_MEM_MODE(TIC6X_MEM_MODE_##mode) 246 247 #define TIC6X_NUM_PREFER 2 248 249 /* Maximum number of fixed fields for a particular opcode. */ 250 #define TIC6X_MAX_FIXED_FIELDS 4 251 252 /* Maximum number of operands in the opcode table for a particular 253 opcode. */ 254 #define TIC6X_MAX_OPERANDS 4 255 256 /* Maximum number of operands in the source code for a particular 257 opcode (different from the number in the opcode table for SPMASK 258 and SPMASKR). */ 259 #define TIC6X_MAX_SOURCE_OPERANDS 8 260 261 /* Maximum number of variable fields for a particular opcode. */ 262 #define TIC6X_MAX_VAR_FIELDS 7 263 264 /* Which functional units an opcode uses. This only describes the 265 basic choice of D, L, M, S or no functional unit; other fields are 266 used to describe further restrictions (instructions only operating 267 on one side), use of cross paths and load/store instructions using 268 one side for the address and the other side for the source or 269 destination register. */ 270 typedef enum 271 { 272 tic6x_func_unit_d, 273 tic6x_func_unit_l, 274 tic6x_func_unit_m, 275 tic6x_func_unit_s, 276 tic6x_func_unit_nfu 277 } tic6x_func_unit_base; 278 279 /* Possible forms of source operand. */ 280 typedef enum 281 { 282 /* An assembly-time constant. */ 283 tic6x_operand_asm_const, 284 /* A link-time constant. */ 285 tic6x_operand_link_const, 286 /* A register, from the same side as the functional unit 287 selected. */ 288 tic6x_operand_reg, 289 /* A register, from the same side as the functional unit 290 selected that ignore RS header bit */ 291 tic6x_operand_reg_nors, 292 /* A register, from the b side */ 293 tic6x_operand_reg_bside, 294 /* A register, from the b side and from the low register set */ 295 tic6x_operand_reg_bside_nors, 296 /* A register, that is from the other side if a cross path is 297 used. */ 298 tic6x_operand_xreg, 299 /* A register, that is from the side of the data path 300 selected. */ 301 tic6x_operand_dreg, 302 /* An address register usable with 15-bit offsets (B14 or B15). 303 This is from the same side as the functional unit if a cross 304 path is not used, and the other side if a cross path is 305 used. */ 306 tic6x_operand_areg, 307 /* The B15 register */ 308 tic6x_operand_b15reg, 309 /* A register coded as an offset from either A16 or B16 depending 310 on the value of the t bit. */ 311 tic6x_operand_treg, 312 /* A register (A0 or B0), from the same side as the 313 functional unit selected. */ 314 tic6x_operand_zreg, 315 /* A return address register (A3 or B3), from the same side as the 316 functional unit selected. */ 317 tic6x_operand_retreg, 318 /* A register pair, from the same side as the functional unit 319 selected. */ 320 tic6x_operand_regpair, 321 /* A register pair, that is from the other side if a cross path is 322 used. */ 323 tic6x_operand_xregpair, 324 /* A register pair, from the side of the data path selected. */ 325 tic6x_operand_dregpair, 326 /* A register pair coded as an offset from either A16 or B16 depending 327 on the value of the t bit. */ 328 tic6x_operand_tregpair, 329 /* The literal string "irp" (case-insensitive). */ 330 tic6x_operand_irp, 331 /* The literal string "nrp" (case-insensitive). */ 332 tic6x_operand_nrp, 333 /* The literal string "ilc" (case-insensitive). */ 334 tic6x_operand_ilc, 335 /* A control register. */ 336 tic6x_operand_ctrl, 337 /* A memory reference (base and offset registers from the side of 338 the functional unit selected), using either unsigned 5-bit 339 constant or register offset, if any offset; register offsets 340 cannot use unscaled () syntax. */ 341 tic6x_operand_mem_short, 342 /* A memory reference (base and offset registers from the side of 343 the functional unit selected), using either unsigned 5-bit 344 constant or register offset, if any offset; register offsets 345 can use unscaled () syntax (for LDNDW and STNDW). */ 346 tic6x_operand_mem_ndw, 347 /* A memory reference using 15-bit link-time constant offset 348 relative to B14 or B15. */ 349 tic6x_operand_mem_long, 350 /* A memory reference that only dereferences a register with no 351 further adjustments (*REG), that register being from the side 352 of the functional unit selected. */ 353 tic6x_operand_mem_deref, 354 /* A functional unit name or a list thereof (for SPMASK and 355 SPMASKR). */ 356 tic6x_operand_func_unit, 357 /* Hardwired constant '5' in Sbu8 Scs10 and Sbu8c 16 bits 358 instruction formats - spru732j.pdf Appendix F.4 */ 359 tic6x_operand_hw_const_minus_1, 360 tic6x_operand_hw_const_0, 361 tic6x_operand_hw_const_1, 362 tic6x_operand_hw_const_5, 363 tic6x_operand_hw_const_16, 364 tic6x_operand_hw_const_24, 365 tic6x_operand_hw_const_31 366 } tic6x_operand_form; 367 368 /* Whether something is, or can be, read or written. */ 369 typedef enum 370 { 371 tic6x_rw_none, 372 tic6x_rw_read, 373 tic6x_rw_write, 374 tic6x_rw_read_write 375 } tic6x_rw; 376 377 /* Description of a source operand and how it is used. */ 378 typedef struct 379 { 380 /* The syntactic form of the operand. */ 381 tic6x_operand_form form; 382 383 /* For non-constant operands, the size in bytes (1, 2, 4, 5 or 384 8). Ignored for constant operands. */ 385 unsigned int size; 386 387 /* Whether the operand is read, written or both. In addition to the 388 operations described here, address registers are read on cycle 1 389 regardless of when the memory operand is read or written, and may 390 be modified as described by the addressing mode, and control 391 registers may be implicitly read by some instructions. There are 392 also some special cases not fully described by this 393 structure. 394 395 - For mpydp, the low part of src2 is read on cycles 1 and 3 but 396 not 2, and the high part on cycles 2 and 4 but not 3. 397 398 - The swap2 pseudo-operation maps to packlh2, reading the first 399 operand of swap2 twice. */ 400 tic6x_rw rw; 401 402 /* The first and last cycles (1 for E1, etc.) at which the operand, 403 or the low part for two-register operands, is read or 404 written. */ 405 unsigned short low_first; 406 unsigned short low_last; 407 408 /* Likewise, for the high part. */ 409 unsigned short high_first; 410 unsigned short high_last; 411 } tic6x_operand_info; 412 413 /* Ways of converting an operand or functional unit specifier to a 414 field value. */ 415 typedef enum 416 { 417 /* Store an unsigned assembly-time constant (which must fit) in 418 the field. */ 419 tic6x_coding_ucst, 420 /* Store a signed constant (which must fit) in the field. This 421 may be used both for assembly-time constants and for link-time 422 constants. */ 423 tic6x_coding_scst, 424 /* Subtract one from an unsigned assembly-time constant (which 425 must be strictly positive before the subtraction) and store the 426 value (which must fit) in the field. */ 427 tic6x_coding_ucst_minus_one, 428 /* Negate a signed assembly-time constant, and store the result of 429 negation (which must fit) in the field. Used only for 430 pseudo-operations. */ 431 tic6x_coding_scst_negate, 432 /* Store an unsigned link-time constant, implicitly DP-relative 433 and counting in bytes, in the field. For expression operands, 434 assembly-time constants are encoded as-is. For memory 435 reference operands, the offset is encoded as-is if [] syntax is 436 used and shifted if () is used. */ 437 tic6x_coding_ulcst_dpr_byte, 438 /* Store an unsigned link-time constant, implicitly DP-relative 439 and counting in half-words, in the field. For expression 440 operands, assembly-time constants are encoded as-is. For 441 memory reference operands, the offset is encoded as-is if [] 442 syntax is used and shifted if () is used. */ 443 tic6x_coding_ulcst_dpr_half, 444 /* Store an unsigned link-time constant, implicitly DP-relative 445 and counting in words, in the field. For expression operands, 446 assembly-time constants are encoded as-is. For memory 447 reference operands, the offset is encoded as-is if [] syntax is 448 used and shifted if () is used. */ 449 tic6x_coding_ulcst_dpr_word, 450 /* Store the low 16 bits of a link-time constant in the field; 451 considered unsigned for disassembly. */ 452 tic6x_coding_lcst_low16, 453 /* Store the high 16 bits of a link-time constant in the field; 454 considered unsigned for disassembly. */ 455 tic6x_coding_lcst_high16, 456 /* Store a signed PC-relative value (address of label minus 457 address of fetch packet containing the current instruction, 458 counted in words) in the field. */ 459 tic6x_coding_pcrel, 460 /* Likewise, but counting in half-words if in a header-based fetch 461 packet. */ 462 tic6x_coding_pcrel_half, 463 /* Store an unsigned PC-relative value used in compact insn */ 464 tic6x_coding_pcrel_half_unsigned, 465 /* Encode the register number (even number for a register pair) in 466 the field. When applied to a memory reference, encode the base 467 register. */ 468 tic6x_coding_reg, 469 /* Encode the register-pair's lsb (even register) for instructions 470 that use src1 as port for loading lsb of double-precision 471 operand value (absdp, dpint, dpsp, dptrunc, rcpdp, rsqrdp). */ 472 tic6x_coding_regpair_lsb, 473 /* Encode the register-pair's msb (odd register), see above. */ 474 tic6x_coding_regpair_msb, 475 /* Store 0 for register B14, 1 for register B15. When applied to 476 a memory reference, encode the base register. */ 477 tic6x_coding_areg, 478 /* Compact instruction offset base register */ 479 tic6x_coding_reg_ptr, 480 /* Store the low part of a control register address. */ 481 tic6x_coding_crlo, 482 /* Store the high part of a control register address. */ 483 tic6x_coding_crhi, 484 /* Encode the even register number for a register pair, shifted 485 right by one bit. */ 486 tic6x_coding_reg_shift, 487 /* Store either the offset register or the 5-bit unsigned offset 488 for a memory reference. If an offset uses the unscaled () 489 form, which is only permitted with constants, it is scaled 490 according to the access size of the operand before being 491 stored. */ 492 tic6x_coding_mem_offset, 493 /* Store either the offset register or the 5-bit unsigned offset 494 for a memory reference, but with no scaling applied to the 495 offset (for nonaligned doubleword operations). */ 496 tic6x_coding_mem_offset_noscale, 497 /* Store the addressing mode for a memory reference. */ 498 tic6x_coding_mem_mode, 499 /* Store whether a memory reference is scaled. */ 500 tic6x_coding_scaled, 501 /* Store the stage in an SPKERNEL instruction in the upper part of 502 the field. */ 503 tic6x_coding_fstg, 504 /* Store the cycle in an SPKERNEL instruction in the lower part of 505 the field. */ 506 tic6x_coding_fcyc, 507 /* Store the mask bits for functional units in the field in an 508 SPMASK or SPMASKR instruction. */ 509 tic6x_coding_spmask, 510 /* Store the number of a register that is unused, or minimally 511 used, in this execute packet. The number must be the same for 512 all uses of this coding in a single instruction, but may be 513 different for different instructions in the execute packet. 514 This is for the "zero" pseudo-operation. This is not safe when 515 reads may occur from instructions in previous execute packets; 516 in such cases the programmer or compiler should use explicit 517 "sub" instructions for those cases of "zero" that cannot be 518 implemented as "mvk" for the processor specified. */ 519 tic6x_coding_reg_unused, 520 /* Store 1 if the functional unit used is on side B, 0 for side 521 A. */ 522 tic6x_coding_fu, 523 /* Store 1 if the data path used (source register for store, 524 destination for load) is on side B, 0 for side A. */ 525 tic6x_coding_data_fu, 526 /* Store 1 if the cross path is being used, 0 otherwise. */ 527 tic6x_coding_xpath, 528 /* L3i constant coding */ 529 tic6x_coding_scst_l3i, 530 /* S3i constant coding */ 531 tic6x_coding_cst_s3i, 532 /* mem offset minus 1 */ 533 tic6x_coding_mem_offset_minus_one, 534 /* non aligned mem offset minus 1 */ 535 tic6x_coding_mem_offset_minus_one_noscale, 536 tic6x_coding_rside 537 } tic6x_coding_method; 538 539 /* How to generate the value of a particular field. */ 540 typedef struct 541 { 542 /* The name of the field. */ 543 tic6x_insn_field_id field_id; 544 545 /* How it is encoded. */ 546 tic6x_coding_method coding_method; 547 548 /* Source operand number, if any. */ 549 unsigned int operand_num; 550 } tic6x_coding_field; 551 552 /* Types of instruction for pipeline purposes. The type determines 553 functional unit and cross path latency (when the same functional 554 unit can be used by other instructions, when the same cross path 555 can be used by other instructions). */ 556 typedef enum 557 { 558 tic6x_pipeline_nop, 559 tic6x_pipeline_1cycle, 560 tic6x_pipeline_1616_m, 561 tic6x_pipeline_store, 562 tic6x_pipeline_mul_ext, 563 tic6x_pipeline_load, 564 tic6x_pipeline_branch, 565 tic6x_pipeline_2cycle_dp, 566 tic6x_pipeline_4cycle, 567 tic6x_pipeline_intdp, 568 tic6x_pipeline_dpcmp, 569 tic6x_pipeline_addsubdp, 570 tic6x_pipeline_mpyi, 571 tic6x_pipeline_mpyid, 572 tic6x_pipeline_mpydp, 573 tic6x_pipeline_mpyspdp, 574 tic6x_pipeline_mpysp2dp 575 } tic6x_pipeline_type; 576 577 /* Description of a control register. */ 578 typedef struct 579 { 580 /* The name of the register. */ 581 const char *name; 582 583 /* Which ISA variants include this control register. */ 584 unsigned short isa_variants; 585 586 /* Whether it can be read, written or both (in supervisor mode). 587 Some registers use the same address, but different names, for 588 reading and writing. */ 589 tic6x_rw rw; 590 591 /* crlo value for this register. */ 592 unsigned int crlo; 593 594 /* Mask that, ANDed with the crhi value in the instruction, must be 595 0. 0 is always generated when generating code. */ 596 unsigned int crhi_mask; 597 } tic6x_ctrl; 598 599 /* An index into the table of control registers. */ 600 typedef enum 601 { 602 #define CTRL(name, isa, rw, crlo, crhi_mask) \ 603 CONCAT2(tic6x_ctrl_,name), 604 #include "tic6x-control-registers.h" 605 #undef CTRL 606 tic6x_ctrl_max 607 } tic6x_ctrl_id; 608 609 /* The table itself. */ 610 extern const tic6x_ctrl tic6x_ctrl_table[tic6x_ctrl_max]; 611 612 /* An entry in the opcode table. */ 613 typedef struct 614 { 615 /* The name of the instruction. */ 616 const char *name; 617 618 /* Functional unit used by this instruction (basic information). */ 619 tic6x_func_unit_base func_unit; 620 621 /* The format of this instruction. */ 622 tic6x_insn_format_id format; 623 624 /* The pipeline type of this instruction. */ 625 tic6x_pipeline_type type; 626 627 /* Which ISA variants include this instruction. */ 628 unsigned short isa_variants; 629 630 /* Flags for this instruction. */ 631 unsigned int flags; 632 633 /* Number of fixed fields, or fields with restricted value ranges, 634 for this instruction. */ 635 unsigned int num_fixed_fields; 636 637 /* Values of fields fixed for this instruction. */ 638 tic6x_fixed_field fixed_fields[TIC6X_MAX_FIXED_FIELDS]; 639 640 /* The number of operands in the source form of this 641 instruction. */ 642 unsigned int num_operands; 643 644 /* Information about individual operands. */ 645 tic6x_operand_info operand_info[TIC6X_MAX_OPERANDS]; 646 647 /* The number of variable fields for this instruction with encoding 648 instructions explicitly given. */ 649 unsigned int num_variable_fields; 650 651 /* How fields (other than ones with fixed value) are computed from 652 the source operands and functional unit specifiers. In addition 653 to fields specified here: 654 655 - creg, if present, is set from the predicate, along with z which 656 must be present if creg is present. 657 658 - p, if present (on all non-compact instructions), is set from 659 the parallel bars. 660 */ 661 tic6x_coding_field variable_fields[TIC6X_MAX_VAR_FIELDS]; 662 } tic6x_opcode; 663 664 /* An index into the table of opcodes. */ 665 typedef enum 666 { 667 #define INSN(name, func_unit, format, type, isa, flags, fixed, ops, var) \ 668 CONCAT6(tic6x_opcode_,name,_,func_unit,_,format), 669 #define INSNE(name, e, func_unit, format, type, isa, flags, fixed, ops, var) \ 670 CONCAT4(tic6x_opcode_,name,_,e), 671 #define INSNU(name, func_unit, format, type, isa, flags, fixed, ops, var) \ 672 CONCAT6(tic6x_opcode_,name,_,func_unit,_,format), 673 #define INSNUE(name, e, func_unit, format, type, isa, flags, fixed, ops, var) \ 674 CONCAT6(tic6x_opcode_,name,_,func_unit,_,e), 675 #include "tic6x-opcode-table.h" 676 #undef INSN 677 #undef INSNE 678 #undef INSNU 679 #undef INSNUE 680 tic6x_opcode_max 681 } tic6x_opcode_id; 682 683 /* The table itself. */ 684 extern const tic6x_opcode tic6x_opcode_table[tic6x_opcode_max]; 685 686 /* A linked list of opcodes. */ 687 typedef struct tic6x_opcode_list_tag 688 { 689 tic6x_opcode_id id; 690 struct tic6x_opcode_list_tag *next; 691 } tic6x_opcode_list; 692 693 /* The information from a fetch packet header. */ 694 typedef struct 695 { 696 /* The header itself. */ 697 unsigned int header; 698 699 /* Whether each word uses compact instructions. */ 700 bfd_boolean word_compact[7]; 701 702 /* Whether loads are protected. */ 703 bfd_boolean prot; 704 705 /* Whether instructions use the high register set. */ 706 bfd_boolean rs; 707 708 /* Data size. */ 709 unsigned int dsz; 710 711 /* Whether compact instructions in the S unit are decoded as 712 branches. */ 713 bfd_boolean br; 714 715 /* Whether compact instructions saturate. */ 716 bfd_boolean sat; 717 718 /* P-bits. */ 719 bfd_boolean p_bits[14]; 720 } tic6x_fetch_packet_header; 721 722 #ifdef __cplusplus 723 } 724 #endif 725 726 #endif /* OPCODE_TIC6X_H */ 727
