| /external/freetype/src/tools/ |
| test_trig.c | 9 #define SPI (PI/FT_ANGLE_PI)
30 d2 = cos( i*SPI );
56 d2 = sin( i*SPI );
82 d2 = tan( i*SPI );
109 a = i*SPI;
144 a = ( i*SPI );
176 v.x = (FT_Fixed)( l * cos( i*SPI ) );
177 v.y = (FT_Fixed)( l * sin( i*SPI ) );
202 ra = rotate*SPI;
214 a = i*SPI;
[all...] |
| /external/ltp/testcases/network/stress/ipsec/ |
| ipsec_lib.sh | 45 echo "S n n is IPsec SPI value"
59 S) SPI=$OPTARG ;;
105 SPI=${SPI:-1000}
199 local spi_1="0x$SPI"
200 local spi_2="0x$(( $SPI + 1 ))"
201 ipsec_try ip xfrm state add src $src dst $dst spi $spi_1 \
203 ROD ip xfrm state add src $dst dst $src spi $spi_2 \
211 local spi_1="0x$(( $SPI + 1 ))"
212 local spi_2="0x$SPI"
[all...] |
| /hardware/intel/bootstub/ |
| bootstub.spec | 35 - changed default spi clock to 100mhz
38 - add SPI controller selection flag
41 - improved spi uart output performance
45 - add SPI uart suppression flag
47 - change SPI uart slave select to 0x2 according to ESL 2008.06 version
49 - add SPI uart support
|
| /device/google/contexthub/firmware/os/platform/stm32/ |
| bl.c | 96 static struct StmSpi *SPI;
384 (void)SPI->DR;
385 while (!(SPI->SR & 1));
386 (void)SPI->DR;
391 while (!(SPI->SR & 2));
392 SPI->DR = val;
393 while (!(SPI->SR & 1));
394 return SPI->DR;
413 SPI = (struct StmSpi*)SPI1_BASE;
430 //configure GPIOA for SPI A4..A7 for AF_SPI1 use (function 5), int pin as not func, high speed, no pullups, not open drain, (…)
[all...] |
| spi.c | 21 #include <spi.h>
34 #include <plat/spi.h>
343 * later may cause the SPI/DMA controllers to "receive" a stale byte
345 * their FIFOs are empty, and even if the SPI FIFO is explicitly cleared).
374 * may "receive" the byte sitting in the SPI controller's FIFO right now,
503 * n.b.: if nothing handles the TXE interrupt in slave mode, the SPI
533 void SPI##_n##_IRQHandler(); \
534 void SPI##_n##_IRQHandler() \
|
| /external/ltp/testcases/network/stress/icmp/multi-diffnic/ |
| icmp4-multi-diffnic01 | 76 # The value of SPI
77 SPI=${SPI:-1000}
232 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
240 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/udp/uni-basic/ |
| udp4-uni-basic01 | 79 # The value of SPI
80 SPI=${SPI:-1000}
231 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
239 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/icmp/multi-diffip/ |
| icmp4-multi-diffip01 | 82 # The value of SPI
83 SPI=${SPI:-1000}
279 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
293 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/tcp/multi-diffnic/ |
| tcp4-multi-diffnic01 | 80 # The value of SPI
81 SPI=${SPI:-1000}
273 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
281 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/tcp/multi-diffport/ |
| tcp4-multi-diffport01 | 83 # The value of SPI
84 SPI=${SPI:-1000}
270 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
278 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/tcp/multi-sameport/ |
| tcp4-multi-sameport01 | 83 # The value of SPI
84 SPI=${SPI:-1000}
269 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
277 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/udp/multi-diffnic/ |
| udp4-multi-diffnic01 | 79 # The value of SPI
80 SPI=${SPI:-1000}
239 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
247 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/udp/multi-diffport/ |
| udp4-multi-diffport01 | 82 # The value of SPI
83 SPI=${SPI:-1000}
237 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
245 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /device/google/contexthub/firmware/os/drivers/st_lsm6dsm/ |
| README | 23 Those macros define specific configuration that is platform dependent (SPI bus,
24 SPI frequency, etc).
34 #define LSM6DSM_SPI_SLAVE_BUS_ID 1 /* SPI bus ID, on STM32F4xx indicate SPI2 */
35 #define LSM6DSM_SPI_SLAVE_FREQUENCY_HZ 8000000 /* SPI frequency in Hz */
36 #define LSM6DSM_SPI_SLAVE_CS_GPIO GPIO_PB(12) /* SPI NSS pin, on STM32F4xx indicate NSS of SPI2 */
|
| /external/ltp/testcases/network/stress/tcp/multi-diffip/ |
| tcp4-multi-diffip01 | 83 # The value of SPI
84 SPI=${SPI:-1000}
304 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
318 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/tcp/uni-basic/ |
| tcp4-uni-basic01 | 90 # The value of SPI
91 SPI=${SPI:-1000}
426 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
434 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /external/ltp/testcases/network/stress/udp/multi-diffip/ |
| udp4-multi-diffip01 | 82 # The value of SPI
83 SPI=${SPI:-1000}
271 $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
285 $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
|
| /device/linaro/bootloader/edk2/NetworkPkg/Application/IpsecConfig/ |
| PolicyEntryOperation.h | 42 #define SPI BIT(23)
|
| PolicyEntryOperation.c | 621 // Convert user imput from string to integer, and fill in the Spi in EFI_IPSEC_SA_ID.
623 Status = GetNumber (L"--spi", (UINT32) -1, &(*SaId)->Spi, sizeof (UINT32), NULL, ParamPackage, FORMAT_NUMBER);
625 *Mask |= SPI;
960 if ((*Mask & (SPI|IPSEC_PROTO|LOCAL|REMOTE)) != (SPI|IPSEC_PROTO|LOCAL|REMOTE)) {
968 L"--spi --ipsec-proto --local --remote"
[all...] |
| /external/compiler-rt/lib/BlocksRuntime/ |
| runtime.c | 224 * GC support SPI functions - called from ObjC runtime and CoreFoundation:
227 /* Public SPI
413 // Old compiler SPI
444 * API supporting SPI
450 #pragma mark SPI/API
486 // Old Compiler SPI point to release a copied Block used by the compiler in dispose helpers
502 * SPI used by other layers
506 // SPI, also internal. Called from NSAutoBlock only under GC
512 // SPI
519 #pragma mark Compiler SPI entry point
[all...] |
| /external/honggfuzz/third_party/android/libBlocksRuntime/ |
| runtime.c | 224 * GC support SPI functions - called from ObjC runtime and CoreFoundation:
227 /* Public SPI
413 // Old compiler SPI
444 * API supporting SPI
450 #pragma mark SPI/API
486 // Old Compiler SPI point to release a copied Block used by the compiler in dispose helpers
502 * SPI used by other layers
506 // SPI, also internal. Called from NSAutoBlock only under GC
512 // SPI
519 #pragma mark Compiler SPI entry point
[all...] |
| /device/linaro/bootloader/edk2/Vlv2TbltDevicePkg/ |
| Build_IFWI.bat | 174 echo /yL Enable SPI lock
|
| bldX64.bat | 208 @echo SPI Images location: Build\%PLATFORM_PACKAGE%\%TARGET%_%TOOL_CHAIN_TAG%\ROM
|
| /external/spirv-llvm/lib/SPIRV/ |
| SPIRVWriter.cpp | [all...] |
| /device/linaro/bootloader/edk2/QuarkPlatformPkg/Library/PlatformSecLib/Ia32/ |
| Flat32.S | 30 # ROM/SPI/MEMORY Definitions
484 # Open up full 8MB SPI decode
|
