| /device/linaro/bootloader/edk2/MdeModulePkg/Universal/SerialDxe/ |
| SerialIo.c | 52 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
77 IN UINT64 BaudRate,
172 0, // BaudRate
189 0, // BaudRate yes
241 This->Mode->BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
249 if (mSerialDevicePath.Uart.BaudRate == This->Mode->BaudRate &&
261 mSerialDevicePath.Uart.BaudRate = This->Mode->BaudRate;
[all...] |
| /device/linaro/bootloader/edk2/ArmPlatformPkg/Library/PL011SerialPortLib/ |
| PL011SerialPortLib.c | 38 UINT64 BaudRate;
44 BaudRate = FixedPcdGet64 (PcdUartDefaultBaudRate);
53 &BaudRate,
119 @param BaudRate The baud rate of the serial device. If the
150 IN OUT UINT64 *BaudRate,
161 BaudRate,
|
| /device/linaro/bootloader/edk2/CorebootPayloadPkg/Library/PlatformHookLib/ |
| PlatformHookLib.c | 54 UINT32 BaudRate;
62 &RegWidth, &BaudRate, &InputHertz,
86 Status = PcdSet32S (PcdSerialBaudRate, BaudRate);
91 Status = PcdSet64S (PcdUartDefaultBaudRate, BaudRate);
|
| /device/linaro/bootloader/edk2/EmbeddedPkg/Include/Library/ |
| GdbSerialLib.h | 26 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
43 IN UINT64 BaudRate,
|
| /device/linaro/bootloader/edk2/IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/ |
| Serial.c | 169 gSerialDevTempate.SerialMode.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
173 gSerialDevTempate.UartDevicePath.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
234 if (UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
492 Uart->BaudRate,
632 SerialDevice->SerialMode.BaudRate = SerialDevice->UartDevicePath.BaudRate;
[all...] |
| /device/linaro/bootloader/edk2/EmbeddedPkg/Library/GdbSerialLib/ |
| GdbSerialLib.c | 71 UINT64 BaudRate;
78 BaudRate = PcdGet64 (PcdGdbBaudRate);
83 return GdbSerialInit (BaudRate, Parity, DataBits, StopBits);
93 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
110 IN UINT64 BaudRate,
133 Divisor = 115200/(UINTN)BaudRate;
|
| /device/linaro/bootloader/OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Library/HiKey960Lib/ |
| HiKey960.c | 112 UINT64 BaudRate;
129 BaudRate = (UINTN)FixedPcdGet64 (PcdSerialDbgUartBaudRate);
133 &BaudRate,
|
| /device/linaro/bootloader/OpenPlatformPkg/Platforms/AMD/Styx/Binary/AmdModulePkg/Common/ |
| UartLineSettings.h | 41 /// UART Baudrate enum
44 UART_BAUDRATE_9600 = 9600, ///< 9600 Baudrate
45 UART_BAUDRATE_19200 = 19200, ///< 19200 Baudrate
46 UART_BAUDRATE_38400 = 38400, ///< 38400 Baudrate
47 UART_BAUDRATE_57600 = 57600, ///< 57600 Baudrate
48 UART_BAUDRATE_115200 = 115200, ///< 115200 Baudrate
51 UART_BAUDRATE_110 = 110, ///< 110 Baudrate
52 UART_BAUDRATE_300 = 300, ///< 300 Baudrate
53 UART_BAUDRATE_600 = 600, ///< 600 Baudrate
54 UART_BAUDRATE_1200 = 1200, ///< 1200 Baudrate
[all...] |
| /device/linaro/bootloader/edk2/ArmVirtPkg/Library/FdtPL011SerialPortLib/ |
| EarlyFdtPL011SerialPortLib.c | 60 UINT64 BaudRate;
107 BaudRate = (UINTN)FixedPcdGet64 (PcdUartDefaultBaudRate);
116 &BaudRate,
235 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
267 IN OUT UINT64 *BaudRate,
|
| FdtPL011SerialPortLib.c | 60 UINT64 BaudRate;
77 BaudRate = (UINTN)PcdGet64 (PcdUartDefaultBaudRate);
86 &BaudRate,
163 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
195 IN OUT UINT64 *BaudRate,
|
| /device/linaro/bootloader/edk2/OptionRomPkg/Bus/Usb/FtdiUsbSerialDxe/ |
| FtdiUsbSerialDriver.c | 420 @param BaudRate[in] The baudrate to be set on the device
424 @return EFI_SUCCESS Baudrate encoding was calculated
426 @return EFI_INVALID_PARAMETER An invalid value of BaudRate was received
432 IN UINT64 BaudRate,
443 if ((BaudRate < 178) || ( BaudRate > ((FTDI_UART_FREQUENCY * 100) / 97))) {
450 if ((BaudRate >= FTDI_SPECIAL_CASE_300_MIN) && (BaudRate <= FTDI_SPECIAL_CASE_300_MAX)) {
454 if ((BaudRate >= FTDI_SPECIAL_CASE_200_MIN) && (BaudRate <= FTDI_SPECIAL_CASE_200_MAX)) {
[all...] |
| /device/linaro/bootloader/edk2/ArmPlatformPkg/ArmJunoPkg/Library/ArmJunoLib/ |
| ArmJuno.c | 118 UINT64 BaudRate;
135 BaudRate = (UINTN)FixedPcdGet64 (PcdSerialDbgUartBaudRate);
139 &BaudRate,
|
| /device/linaro/bootloader/edk2/MdePkg/Include/Library/ |
| SerialPortLib.h | 140 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
172 IN OUT UINT64 *BaudRate,
|
| /device/linaro/bootloader/edk2/MdePkg/Library/BaseSerialPortLibNull/ |
| BaseSerialPortLibNull.c | 155 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
187 IN OUT UINT64 *BaudRate,
|
| /device/linaro/bootloader/edk2/EdkCompatibilityPkg/Foundation/Efi/Protocol/SerialIo/ |
| SerialIo.h | 107 IN UINT64 BaudRate,
122 BaudRate - The requested baud rate. A BaudRate value of 0 will use the the
253 BaudRate - If applicable, the current baud rate setting of the device; otherwise,
273 UINT64 BaudRate;
|
| /device/linaro/bootloader/edk2/MdePkg/Include/Protocol/ |
| SerialIo.h | 111 @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
136 IN UINT64 BaudRate,
234 @param BaudRate
263 UINT64 BaudRate;
|
| /external/syslinux/efi32/include/efi/ |
| efiser.h | 67 IN UINT64 BaudRate,
110 UINT64 BaudRate;
|
| /external/syslinux/efi64/include/efi/ |
| efiser.h | 67 IN UINT64 BaudRate,
110 UINT64 BaudRate;
|
| /external/syslinux/gnu-efi/gnu-efi-3.0/inc/ |
| efiser.h | 67 IN UINT64 BaudRate,
110 UINT64 BaudRate;
|
| /device/linaro/bootloader/edk2/Nt32Pkg/WinNtSerialIoDxe/ |
| WinNtSerialIo.c | 201 if ( UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
474 Uart->BaudRate,
650 Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate;
887 This->Mode->BaudRate,
900 IN UINT64 BaudRate,
916 BaudRate - The Baud rate of the serial device.
952 if (BaudRate == 0) {
953 BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
979 if ((BaudRate > SERIAL_PORT_MAX_BAUD_RATE) || (BaudRate < SERIAL_PORT_MIN_BAUD_RATE)) {
[all...] |
| /device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/PciSioSerialDxe/ |
| SerialIo.c | 56 the BaudRate. Do not verify the BaudRate if it's 0.
57 @param BaudRate The requested baudrate of the serial device.
62 @param ActualBaudRate Return the actual supported baudrate without
63 exceeding BaudRate. NULL means baudrate degradation
65 If the requested BaudRate is not supported, the routine
75 IN UINT64 BaudRate,
106 // Divisor = ClockRate / 16 / BaudRate = ClockRate / (16 * BaudRate)
[all...] |
| /device/linaro/bootloader/edk2/ArmPlatformPkg/Drivers/PL011Uart/ |
| PL011Uart.c | 42 @param BaudRate The baud rate of the serial device. If the
71 IN OUT UINT64 *BaudRate,
183 if (*BaudRate == 0) {
184 *BaudRate = FixedPcdGet32 (PcdSerialBaudRate);
185 if (*BaudRate == 0) {
193 Divisor = (UartClkInHz * 4) / *BaudRate;
|
| /device/linaro/bootloader/edk2/ShellPkg/Library/UefiShellDebug1CommandsLib/ |
| SerMode.c | 135 SerialIo->Mode->BaudRate,
182 UINTN BaudRate;
231 BaudRate = ShellStrToUintn(Temp);
234 BaudRate = 0;
331 (UINT64) BaudRate,
|
| /external/syslinux/efi32/include/efi/protocol/ |
| efidbg.h | 50 UINT64 BaudRate;
175 IN UINT64 BaudRate,
|
| /external/syslinux/efi64/include/efi/protocol/ |
| efidbg.h | 50 UINT64 BaudRate;
175 IN UINT64 BaudRate,
|
