| /device/linaro/bootloader/edk2/MdeModulePkg/Universal/SerialDxe/ |
| SerialIo.c | 28 UART_DEVICE_PATH Uart;
249 if (mSerialDevicePath.Uart.BaudRate == This->Mode->BaudRate &&
250 mSerialDevicePath.Uart.DataBits == (UINT8) This->Mode->DataBits &&
251 mSerialDevicePath.Uart.Parity == (UINT8) This->Mode->Parity &&
252 mSerialDevicePath.Uart.StopBits == (UINT8) This->Mode->StopBits
261 mSerialDevicePath.Uart.BaudRate = This->Mode->BaudRate;
262 mSerialDevicePath.Uart.DataBits = (UINT8) This->Mode->DataBits;
263 mSerialDevicePath.Uart.Parity = (UINT8) This->Mode->Parity;
264 mSerialDevicePath.Uart.StopBits = (UINT8) This->Mode->StopBits;
343 if (mSerialDevicePath.Uart.BaudRate == BaudRate &&
[all...] |
| /device/linaro/bootloader/edk2/Omap35xxPkg/Include/Library/ |
| OmapLib.h | 39 IN UINTN Uart
|
| /device/linaro/bootloader/edk2/QuarkPlatformPkg/Library/PlatformBootManagerLib/ |
| PlatformData.c | 40 UART_DEVICE_PATH Uart;
47 UART_DEVICE_PATH Uart;
243 // Update UART device path nodes based on UART PCD settings
245 gPciUartDevicePath0.Uart.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
246 gPciUartDevicePath0.Uart.DataBits = PcdGet8 (PcdUartDefaultDataBits);
247 gPciUartDevicePath0.Uart.Parity = PcdGet8 (PcdUartDefaultParity);
248 gPciUartDevicePath0.Uart.StopBits = PcdGet8 (PcdUartDefaultStopBits);
249 gPciUartDevicePath1.Uart.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
250 gPciUartDevicePath1.Uart.DataBits = PcdGet8 (PcdUartDefaultDataBits);
[all...] |
| /device/linaro/bootloader/edk2/Omap35xxPkg/Library/OmapLib/ |
| OmapLib.c | 73 IN UINTN Uart
76 switch (Uart) {
|
| /device/linaro/bootloader/edk2/MdeModulePkg/Bus/Pci/PciSioSerialDxe/ |
| Serial.c | 147 // Initialize UART default setting in gSerialDevTempate
359 UART_DEVICE_PATH *Uart;
368 Uart = SkipControllerDevicePathNode (RemainingDevicePath, NULL, NULL);
369 if (DevicePathType (Uart) != MESSAGING_DEVICE_PATH ||
370 DevicePathSubType (Uart) != MSG_UART_DP ||
371 DevicePathNodeLength (Uart) != sizeof (UART_DEVICE_PATH)
379 if (!VerifyUartParameters (0, Uart->BaudRate, Uart->DataBits, Uart->Parity, Uart->StopBits, NULL, NULL)) {
[all...] |
| /device/linaro/bootloader/edk2/IntelFrameworkModulePkg/Universal/BdsDxe/BootMaint/ |
| ConsoleOption.c | 107 UART_DEVICE_PATH *Uart;
127 Uart = (UART_DEVICE_PATH *) Node;
129 &Uart->BaudRate,
135 &Uart->DataBits,
141 &Uart->Parity,
147 &Uart->StopBits,
236 UART_DEVICE_PATH *Uart;
257 Uart = (UART_DEVICE_PATH *) Node;
259 &Uart->BaudRate,
265 &Uart->DataBits,
[all...] |
| /device/linaro/bootloader/edk2/MdeModulePkg/Library/BootMaintenanceManagerUiLib/ |
| ConsoleOption.c | 122 UART_DEVICE_PATH *Uart;
141 Uart = (UART_DEVICE_PATH *) Node;
143 &Uart->BaudRate,
149 &Uart->DataBits,
155 &Uart->Parity,
161 &Uart->StopBits,
233 UART_DEVICE_PATH *Uart;
254 Uart = (UART_DEVICE_PATH *) Node;
256 &Uart->BaudRate,
262 &Uart->DataBits,
[all...] |
| /device/linaro/bootloader/edk2/CorebootPayloadPkg/Library/PlatformBootManagerLib/ |
| PlatformBootManager.h | 66 UART_DEVICE_PATH Uart;
|
| /device/linaro/bootloader/edk2/OptionRomPkg/Bus/Usb/FtdiUsbSerialDxe/ |
| FtdiUsbSerialDriver.c | 854 UART_DEVICE_PATH *Uart;
859 Uart = NULL;
953 Uart = (UART_DEVICE_PATH *) NextDevicePathNode (RemainingDevicePath);
954 if (Uart->Header.Type == MESSAGING_DEVICE_PATH &&
955 Uart->Header.SubType == MSG_UART_DP &&
956 sizeof (UART_DEVICE_PATH) == DevicePathNodeLength ((EFI_DEVICE_PATH *) Uart)) {
957 Uart->BaudRate = BaudRate;
958 Uart->DataBits = DataBits;
959 Uart->StopBits = (UINT8)StopBits;
960 Uart->Parity = (UINT8) Parity;
[all...] |
| /device/linaro/bootloader/edk2/DuetPkg/Library/DuetBdsLib/ |
| BdsPlatform.h | 183 UART_DEVICE_PATH Uart;
198 UART_DEVICE_PATH Uart;
|
| /device/linaro/bootloader/edk2/Nt32Pkg/Library/PlatformBootManagerLib/ |
| PlatformBootManager.h | 72 UART_DEVICE_PATH Uart;
|
| /device/linaro/bootloader/edk2/Nt32Pkg/WinNtSerialIoDxe/ |
| WinNtSerialIo.c | 24 The new handle is required, since the serial device must add an UART device
27 Handle(2) - SerialIo - DevicePath(1)\UART
252 // When the driver has produced device path with flow control node but RemainingDevicePath only contains UART node,
391 UART_DEVICE_PATH *Uart;
471 Uart = (UART_DEVICE_PATH *) RemainingDevicePath;
474 Uart->BaudRate,
477 (EFI_PARITY_TYPE) Uart->Parity,
478 Uart->DataBits,
479 (EFI_STOP_BITS_TYPE) Uart->StopBits
481 FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart);
[all...] |
| /external/syslinux/efi32/include/efi/protocol/ |
| efidbg.h | 67 DEBUGPORT_16550_DEVICE_PATH Uart;
|
| /external/syslinux/efi64/include/efi/protocol/ |
| efidbg.h | 67 DEBUGPORT_16550_DEVICE_PATH Uart;
|
| /external/syslinux/gnu-efi/gnu-efi-3.0/inc/protocol/ |
| efidbg.h | 67 DEBUGPORT_16550_DEVICE_PATH Uart;
|
| /external/syslinux/gnu-efi/gnu-efi-3.0/lib/ |
| dpath.c | 714 UART_DEVICE_PATH *Uart;
717 Uart = DevPath;
718 switch (Uart->Parity) {
728 if (Uart->BaudRate == 0) {
729 CatPrint(Str, L"Uart(DEFAULT %c",Uart->BaudRate,Parity);
731 CatPrint(Str, L"Uart(%d %c",Uart->BaudRate,Parity);
734 if (Uart->DataBits == 0) {
737 CatPrint(Str, L"%d",Uart->DataBits)
[all...] |
| /device/linaro/bootloader/edk2/IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/ |
| Serial.c | 167 // Initialize UART default setting in gSerialDevTempate
290 // When the driver has produced device path with flow control node but RemainingDevicePath only contains UART node,
359 // Use the ISA I/O Protocol to see if Controller is standard ISA UART that
409 UART_DEVICE_PATH *Uart;
489 Uart = (UART_DEVICE_PATH *) RemainingDevicePath;
492 Uart->BaudRate,
495 (EFI_PARITY_TYPE) Uart->Parity,
496 Uart->DataBits,
497 (EFI_STOP_BITS_TYPE) Uart->StopBits
500 FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart);
[all...] |
| /device/linaro/bootloader/edk2/MdePkg/Library/UefiDevicePathLib/ |
| DevicePathFromText.c | [all...] |
| /device/linaro/bootloader/edk2/Vlv2TbltDevicePkg/Library/PlatformBdsLib/ |
| BdsPlatform.h | 250 UART_DEVICE_PATH Uart;
294 // Debug Agent UART Console device path definition
298 UART_DEVICE_PATH Uart;
|
| /external/syslinux/efi32/include/efi/ |
| efidevp.h | 355 UART_DEVICE_PATH Uart;
389 UART_DEVICE_PATH *Uart;
|
| /external/syslinux/efi64/include/efi/ |
| efidevp.h | 355 UART_DEVICE_PATH Uart;
389 UART_DEVICE_PATH *Uart;
|
| /external/syslinux/gnu-efi/gnu-efi-3.0/inc/ |
| efidevp.h | 355 UART_DEVICE_PATH Uart;
389 UART_DEVICE_PATH *Uart;
|
| /external/syslinux/gpxe/src/include/gpxe/efi/Protocol/ |
| DevicePath.h | 478 UART_DEVICE_PATH Uart;
515 UART_DEVICE_PATH *Uart;
|
| /device/linaro/bootloader/edk2/ShellPkg/Library/UefiShellCommandLib/ |
| ConsistMapping.c | 582 UART_DEVICE_PATH *Uart;
587 Uart = (UART_DEVICE_PATH *) DevicePathNode;
588 Status = AppendCSDNum (MappingItem, Uart->BaudRate);
590 Status = AppendCSDNum (MappingItem, Uart->DataBits);
593 Status = AppendCSDNum (MappingItem, Uart->Parity);
596 Status = AppendCSDNum (MappingItem, Uart->StopBits);
[all...] |
| /device/linaro/bootloader/edk2/EdkCompatibilityPkg/Foundation/Efi/Include/ |
| EfiDevicePath.h | 510 UART_DEVICE_PATH Uart;
558 UART_DEVICE_PATH *Uart;
|
