1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2017, Bin Meng <bmeng.cn (at) gmail.com> 4 * 5 * From coreboot src/soc/intel/braswell/include/soc/gpio.h 6 */ 7 8 #ifndef _BRASWELL_GPIO_H_ 9 #define _BRASWELL_GPIO_H_ 10 11 #include <asm/arch/iomap.h> 12 13 enum mode_list { 14 M0, 15 M1, 16 M2, 17 M3, 18 M4, 19 M5, 20 M6, 21 M7, 22 M8, 23 M9, 24 M10, 25 M11, 26 M12, 27 M13, 28 }; 29 30 enum int_select { 31 L0, 32 L1, 33 L2, 34 L3, 35 L4, 36 L5, 37 L6, 38 L7, 39 L8, 40 L9, 41 L10, 42 L11, 43 L12, 44 L13, 45 L14, 46 L15, 47 }; 48 49 enum gpio_en { 50 NATIVE = 0xff, 51 GPIO = 0, /* Native, no need to set PAD_VALUE */ 52 GPO = 1, /* GPO, output only in PAD_VALUE */ 53 GPI = 2, /* GPI, input only in PAD_VALUE */ 54 HI_Z = 3, 55 NA_GPO = 0, 56 }; 57 58 enum gpio_state { 59 LOW, 60 HIGH, 61 }; 62 63 enum en_dis { 64 DISABLE, /* Disable */ 65 ENABLE, /* Enable */ 66 }; 67 68 enum int_type { 69 INT_DIS, 70 TRIG_EDGE_LOW, 71 TRIG_EDGE_HIGH, 72 TRIG_EDGE_BOTH, 73 TRIG_LEVEL, 74 }; 75 76 enum mask { 77 MASKABLE, 78 NON_MASKABLE, 79 }; 80 81 enum glitch_cfg { 82 GLITCH_DISABLE, 83 EN_EDGE_DETECT, 84 EN_RX_DATA, 85 EN_EDGE_RX_DATA, 86 }; 87 88 enum inv_rx_tx { 89 NO_INVERSION = 0, 90 INV_RX_ENABLE = 1, 91 INV_TX_ENABLE = 2, 92 INV_RX_TX_ENABLE = 3, 93 INV_RX_DATA = 4, 94 INV_TX_DATA = 8, 95 }; 96 97 enum voltage { 98 VOLT_3_3, /* Working on 3.3 Volts */ 99 VOLT_1_8, /* Working on 1.8 Volts */ 100 }; 101 102 enum hs_mode { 103 DISABLE_HS, /* Disable high speed mode */ 104 ENABLE_HS, /* Enable high speed mode */ 105 }; 106 107 enum odt_up_dn { 108 PULL_UP, /* On Die Termination Up */ 109 PULL_DOWN, /* On Die Termination Down */ 110 }; 111 112 enum odt_en { 113 DISABLE_OD, /* On Die Termination Disable */ 114 ENABLE_OD, /* On Die Termination Enable */ 115 }; 116 117 enum pull_type { 118 P_NONE = 0, /* Pull None */ 119 P_20K_L = 1, /* Pull Down 20K */ 120 P_5K_L = 2, /* Pull Down 5K */ 121 P_1K_L = 4, /* Pull Down 1K */ 122 P_20K_H = 9, /* Pull Up 20K */ 123 P_5K_H = 10, /* Pull Up 5K */ 124 P_1K_H = 12 /* Pull Up 1K */ 125 }; 126 127 enum bit { 128 ONE_BIT = 1, 129 TWO_BIT = 3, 130 THREE_BIT = 7, 131 FOUR_BIT = 15, 132 FIVE_BIT = 31, 133 SIX_BIT = 63, 134 SEVEN_BIT = 127, 135 EIGHT_BIT = 255 136 }; 137 138 enum gpe_config { 139 GPE, 140 SMI, 141 SCI, 142 }; 143 144 enum community { 145 SOUTHWEST = 0x0000, 146 NORTH = 0x8000, 147 EAST = 0x10000, 148 SOUTHEAST = 0x18000, 149 VIRTUAL = 0x20000, 150 }; 151 152 #define NA 0xff 153 #define TERMINATOR 0xffffffff 154 155 #define GPIO_FAMILY_CONF(family_name, park_mode, hysctl, vp18_mode, hs_mode, \ 156 odt_up_dn, odt_en, curr_src_str, rcomp, family_no, community_offset) { \ 157 .confg = ((((park_mode) != NA) ? park_mode << 26 : 0) | \ 158 (((hysctl) != NA) ? hysctl << 24 : 0) | \ 159 (((vp18_mode) != NA) ? vp18_mode << 21 : 0) | \ 160 (((hs_mode) != NA) ? hs_mode << 19 : 0) | \ 161 (((odt_up_dn) != NA) ? odt_up_dn << 18 : 0) | \ 162 (((odt_en) != NA) ? odt_en << 17 : 0) | \ 163 (curr_src_str)), \ 164 .confg_changes = ((((park_mode) != NA) ? ONE_BIT << 26 : 0) | \ 165 (((hysctl) != NA) ? TWO_BIT << 24 : 0) | \ 166 (((vp18_mode) != NA) ? ONE_BIT << 21 : 0) | \ 167 (((hs_mode) != NA) ? ONE_BIT << 19 : 0) | \ 168 (((odt_up_dn) != NA) ? ONE_BIT << 18 : 0) | \ 169 (((odt_en) != NA) ? ONE_BIT << 17 : 0) | \ 170 (THREE_BIT)), \ 171 .misc = ((rcomp == ENABLE) ? 1 : 0) , \ 172 .mmio_addr = (community_offset == TERMINATOR) ? TERMINATOR : \ 173 ((family_no != NA) ? (IO_BASE_ADDRESS + community_offset +\ 174 (0x80 * family_no) + 0x1080) : 0) , \ 175 .name = 0 \ 176 } 177 178 #define GPIO_PAD_CONF(pad_name, mode_select, mode, gpio_config, gpio_state, \ 179 gpio_light_mode, int_type, int_sel, term, open_drain, current_source,\ 180 int_mask, glitch, inv_rx_tx, wake_mask, wake_mask_bit, gpe, \ 181 mmio_offset, community_offset) { \ 182 .confg0 = ((((int_sel) != NA) ? (int_sel << 28) : 0) | \ 183 (((glitch) != NA) ? (glitch << 26) : 0) | \ 184 (((term) != NA) ? (term << 20) : 0) | \ 185 (((mode_select) == GPIO) ? ((mode << 16) | (1 << 15)) : \ 186 ((mode << 16))) | \ 187 (((gpio_config) != NA) ? (gpio_config << 8) : 0) | \ 188 (((gpio_light_mode) != NA) ? (gpio_light_mode << 7) : 0) | \ 189 (((gpio_state) == HIGH) ? 2 : 0)), \ 190 .confg0_changes = ((((int_sel) != NA) ? (FOUR_BIT << 28) : 0) | \ 191 (((glitch) != NA) ? (TWO_BIT << 26) : 0) | \ 192 (((term) != NA) ? (FOUR_BIT << 20) : 0) | \ 193 (FIVE_BIT << 15) | \ 194 (((gpio_config) != NA) ? (THREE_BIT << 8) : 0) | \ 195 (((gpio_light_mode) != NA) ? (ONE_BIT << 7) : 0) | \ 196 (((gpio_state) != NA) ? ONE_BIT << 1 : 0)), \ 197 .confg1 = ((((current_source) != NA) ? (current_source << 27) : 0) | \ 198 (((inv_rx_tx) != NA) ? inv_rx_tx << 4 : 0) | \ 199 (((open_drain) != NA) ? open_drain << 3 : 0) | \ 200 (((int_type) != NA) ? int_type : 0)), \ 201 .confg1_changes = ((((current_source) != NA) ? (ONE_BIT << 27) : 0) | \ 202 (((inv_rx_tx) != NA) ? FOUR_BIT << 4 : 0) | \ 203 (((open_drain) != NA) ? ONE_BIT << 3 : 0) | \ 204 (((int_type) != NA) ? THREE_BIT : 0)), \ 205 .community = community_offset, \ 206 .mmio_addr = (community_offset == TERMINATOR) ? TERMINATOR : \ 207 ((mmio_offset != NA) ? (IO_BASE_ADDRESS + \ 208 community_offset + mmio_offset) : 0), \ 209 .name = 0, \ 210 .misc = ((((gpe) != NA) ? (gpe << 0) : 0) | \ 211 (((wake_mask) != NA) ? (wake_mask << 2) : 0) | \ 212 (((int_mask) != NA) ? (int_mask << 3) : 0)) | \ 213 (((wake_mask_bit) != NA) ? (wake_mask_bit << 4) : (NA << 4)) \ 214 } 215 216 #endif /* _BRASWELL_GPIO_H_ */ 217
