1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (c) 2011 The Chromium OS Authors. 4 */ 5 6 /* Tegra clock control functions */ 7 8 #ifndef _TEGRA_CLOCK_H_ 9 #define _TEGRA_CLOCK_H_ 10 11 /* Set of oscillator frequencies supported in the internal API. */ 12 enum clock_osc_freq { 13 /* All in MHz, so 13_0 is 13.0MHz */ 14 CLOCK_OSC_FREQ_13_0, 15 CLOCK_OSC_FREQ_19_2, 16 CLOCK_OSC_FREQ_12_0, 17 CLOCK_OSC_FREQ_26_0, 18 CLOCK_OSC_FREQ_38_4, 19 CLOCK_OSC_FREQ_48_0, 20 21 CLOCK_OSC_FREQ_COUNT, 22 }; 23 24 /* 25 * Note that no Tegra clock register actually uses all of bits 31:28 as 26 * the mux field. Rather, bits 30:28, 29:28, or 28 are used. However, in 27 * those cases, nothing is stored in the bits about the mux field, so it's 28 * safe to pretend that the mux field extends all the way to the end of the 29 * register. As such, the U-Boot clock driver is currently a bit lazy, and 30 * doesn't distinguish between 31:28, 30:28, 29:28 and 28; it just lumps 31 * them all together and pretends they're all 31:28. 32 */ 33 enum { 34 MASK_BITS_31_30, 35 MASK_BITS_31_29, 36 MASK_BITS_31_28, 37 }; 38 39 #include <asm/arch/clock-tables.h> 40 /* PLL stabilization delay in usec */ 41 #define CLOCK_PLL_STABLE_DELAY_US 300 42 43 /* return the current oscillator clock frequency */ 44 enum clock_osc_freq clock_get_osc_freq(void); 45 46 /* return the clk_m frequency */ 47 unsigned int clk_m_get_rate(unsigned int parent_rate); 48 49 /** 50 * Start PLL using the provided configuration parameters. 51 * 52 * @param id clock id 53 * @param divm input divider 54 * @param divn feedback divider 55 * @param divp post divider 2^n 56 * @param cpcon charge pump setup control 57 * @param lfcon loop filter setup control 58 * 59 * @returns monotonic time in us that the PLL will be stable 60 */ 61 unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn, 62 u32 divp, u32 cpcon, u32 lfcon); 63 64 /** 65 * Set PLL output frequency 66 * 67 * @param clkid clock id 68 * @param pllout pll output id 69 * @param rate desired output rate 70 * 71 * @return 0 if ok, -1 on error (invalid clock id or no suitable divider) 72 */ 73 int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, 74 unsigned rate); 75 76 /** 77 * Read low-level parameters of a PLL. 78 * 79 * @param id clock id to read (note: USB is not supported) 80 * @param divm returns input divider 81 * @param divn returns feedback divider 82 * @param divp returns post divider 2^n 83 * @param cpcon returns charge pump setup control 84 * @param lfcon returns loop filter setup control 85 * 86 * @returns 0 if ok, -1 on error (invalid clock id) 87 */ 88 int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn, 89 u32 *divp, u32 *cpcon, u32 *lfcon); 90 91 /* 92 * Enable a clock 93 * 94 * @param id clock id 95 */ 96 void clock_enable(enum periph_id clkid); 97 98 /* 99 * Disable a clock 100 * 101 * @param id clock id 102 */ 103 void clock_disable(enum periph_id clkid); 104 105 /* 106 * Set whether a clock is enabled or disabled. 107 * 108 * @param id clock id 109 * @param enable 1 to enable, 0 to disable 110 */ 111 void clock_set_enable(enum periph_id clkid, int enable); 112 113 /** 114 * Reset a peripheral. This puts it in reset, waits for a delay, then takes 115 * it out of reset and waits for th delay again. 116 * 117 * @param periph_id peripheral to reset 118 * @param us_delay time to delay in microseconds 119 */ 120 void reset_periph(enum periph_id periph_id, int us_delay); 121 122 /** 123 * Put a peripheral into or out of reset. 124 * 125 * @param periph_id peripheral to reset 126 * @param enable 1 to put into reset, 0 to take out of reset 127 */ 128 void reset_set_enable(enum periph_id periph_id, int enable); 129 130 131 /* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */ 132 enum crc_reset_id { 133 /* Things we can hold in reset for each CPU */ 134 crc_rst_cpu = 1, 135 crc_rst_de = 1 << 4, /* What is de? */ 136 crc_rst_watchdog = 1 << 8, 137 crc_rst_debug = 1 << 12, 138 }; 139 140 /** 141 * Put parts of the CPU complex into or out of reset.\ 142 * 143 * @param cpu cpu number (0 or 1 on Tegra2, 0-3 on Tegra3) 144 * @param which which parts of the complex to affect (OR of crc_reset_id) 145 * @param reset 1 to assert reset, 0 to de-assert 146 */ 147 void reset_cmplx_set_enable(int cpu, int which, int reset); 148 149 /** 150 * Set the source for a peripheral clock. This plus the divisor sets the 151 * clock rate. You need to look up the datasheet to see the meaning of the 152 * source parameter as it changes for each peripheral. 153 * 154 * Warning: This function is only for use pre-relocation. Please use 155 * clock_start_periph_pll() instead. 156 * 157 * @param periph_id peripheral to adjust 158 * @param source source clock (0, 1, 2 or 3) 159 */ 160 void clock_ll_set_source(enum periph_id periph_id, unsigned source); 161 162 /** 163 * This function is similar to clock_ll_set_source() except that it can be 164 * used for clocks with more than 2 mux bits. 165 * 166 * @param periph_id peripheral to adjust 167 * @param mux_bits number of mux bits for the clock 168 * @param source source clock (0-15 depending on mux_bits) 169 */ 170 int clock_ll_set_source_bits(enum periph_id periph_id, int mux_bits, 171 unsigned source); 172 173 /** 174 * Set the source and divisor for a peripheral clock. This sets the 175 * clock rate. You need to look up the datasheet to see the meaning of the 176 * source parameter as it changes for each peripheral. 177 * 178 * Warning: This function is only for use pre-relocation. Please use 179 * clock_start_periph_pll() instead. 180 * 181 * @param periph_id peripheral to adjust 182 * @param source source clock (0, 1, 2 or 3) 183 * @param divisor divisor value to use 184 */ 185 void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source, 186 unsigned divisor); 187 188 /** 189 * Returns the current parent clock ID of a given peripheral. This can be 190 * useful in order to call clock_*_periph_*() from generic code that has no 191 * specific knowledge of system-level clock tree structure. 192 * 193 * @param periph_id peripheral to query 194 * @return clock ID of the peripheral's current parent clock 195 */ 196 enum clock_id clock_get_periph_parent(enum periph_id periph_id); 197 198 /** 199 * Start a peripheral PLL clock at the given rate. This also resets the 200 * peripheral. 201 * 202 * @param periph_id peripheral to start 203 * @param parent PLL id of required parent clock 204 * @param rate Required clock rate in Hz 205 * @return rate selected in Hz, or -1U if something went wrong 206 */ 207 unsigned clock_start_periph_pll(enum periph_id periph_id, 208 enum clock_id parent, unsigned rate); 209 210 /** 211 * Returns the rate of a peripheral clock in Hz. Since the caller almost 212 * certainly knows the parent clock (having just set it) we require that 213 * this be passed in so we don't need to work it out. 214 * 215 * @param periph_id peripheral to start 216 * @param parent PLL id of parent clock (used to calculate rate, you 217 * must know this!) 218 * @return clock rate of peripheral in Hz 219 */ 220 unsigned long clock_get_periph_rate(enum periph_id periph_id, 221 enum clock_id parent); 222 223 /** 224 * Adjust peripheral PLL clock to the given rate. This does not reset the 225 * peripheral. If a second stage divisor is not available, pass NULL for 226 * extra_div. If it is available, then this parameter will return the 227 * divisor selected (which will be a power of 2 from 1 to 256). 228 * 229 * @param periph_id peripheral to start 230 * @param parent PLL id of required parent clock 231 * @param rate Required clock rate in Hz 232 * @param extra_div value for the second-stage divisor (NULL if one is 233 not available) 234 * @return rate selected in Hz, or -1U if something went wrong 235 */ 236 unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, 237 enum clock_id parent, unsigned rate, int *extra_div); 238 239 /** 240 * Returns the clock rate of a specified clock, in Hz. 241 * 242 * @param parent PLL id of clock to check 243 * @return rate of clock in Hz 244 */ 245 unsigned clock_get_rate(enum clock_id clkid); 246 247 /** 248 * Start up a UART using low-level calls 249 * 250 * Prior to relocation clock_start_periph_pll() cannot be called. This 251 * function provides a way to set up a UART using low-level calls which 252 * do not require BSS. 253 * 254 * @param periph_id Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1) 255 */ 256 void clock_ll_start_uart(enum periph_id periph_id); 257 258 /** 259 * Decode a peripheral ID from a device tree node. 260 * 261 * This works by looking up the peripheral's 'clocks' node and reading out 262 * the second cell, which is the clock number / peripheral ID. 263 * 264 * @param blob FDT blob to use 265 * @param node Node to look at 266 * @return peripheral ID, or PERIPH_ID_NONE if none 267 */ 268 int clock_decode_periph_id(struct udevice *dev); 269 270 /** 271 * Checks if the oscillator bypass is enabled (XOBP bit) 272 * 273 * @return 1 if bypass is enabled, 0 if not 274 */ 275 int clock_get_osc_bypass(void); 276 277 /* 278 * Checks that clocks are valid and prints a warning if not 279 * 280 * @return 0 if ok, -1 on error 281 */ 282 int clock_verify(void); 283 284 /* Initialize the clocks */ 285 void clock_init(void); 286 287 /* Initialize the PLLs */ 288 void clock_early_init(void); 289 290 /* @return true if hardware indicates that clock_early_init() was called */ 291 bool clock_early_init_done(void); 292 293 /* Returns a pointer to the clock source register for a peripheral */ 294 u32 *get_periph_source_reg(enum periph_id periph_id); 295 296 /* Returns a pointer to the given 'simple' PLL */ 297 struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid); 298 299 /* 300 * Given a peripheral ID, determine where the mux bits are in the peripheral 301 * clock's register, the number of divider bits the clock has, and the SoC- 302 * specific clock type. 303 * 304 * This is an internal API between the core Tegra clock code and the SoC- 305 * specific clock code. 306 * 307 * @param periph_id peripheral to query 308 * @param mux_bits Set to number of bits in mux register 309 * @param divider_bits Set to the relevant MASK_BITS_* value 310 * @param type Set to the SoC-specific clock type 311 * @return 0 on success, -1 on error 312 */ 313 int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, 314 int *divider_bits, int *type); 315 316 /* 317 * Given a peripheral ID and clock source mux value, determine the clock_id 318 * of that peripheral's parent. 319 * 320 * This is an internal API between the core Tegra clock code and the SoC- 321 * specific clock code. 322 * 323 * @param periph_id peripheral to query 324 * @param source raw clock source mux value 325 * @return the CLOCK_ID_* value @source represents 326 */ 327 enum clock_id get_periph_clock_id(enum periph_id periph_id, int source); 328 329 /** 330 * Given a peripheral ID and the required source clock, this returns which 331 * value should be programmed into the source mux for that peripheral. 332 * 333 * There is special code here to handle the one source type with 5 sources. 334 * 335 * @param periph_id peripheral to start 336 * @param source PLL id of required parent clock 337 * @param mux_bits Set to number of bits in mux register: 2 or 4 338 * @param divider_bits Set to number of divider bits (8 or 16) 339 * @return mux value (0-4, or -1 if not found) 340 */ 341 int get_periph_clock_source(enum periph_id periph_id, 342 enum clock_id parent, int *mux_bits, int *divider_bits); 343 344 /* 345 * Convert a device tree clock ID to our peripheral ID. They are mostly 346 * the same but we are very cautious so we check that a valid clock ID is 347 * provided. 348 * 349 * @param clk_id Clock ID according to tegra30 device tree binding 350 * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid 351 */ 352 enum periph_id clk_id_to_periph_id(int clk_id); 353 354 /** 355 * Set the output frequency you want for each PLL clock. 356 * PLL output frequencies are programmed by setting their N, M and P values. 357 * The governing equations are: 358 * VCO = (Fi / m) * n, Fo = VCO / (2^p) 359 * where Fo is the output frequency from the PLL. 360 * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi) 361 * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1 362 * Please see Tegra TRM section 5.3 to get the detail for PLL Programming 363 * 364 * @param n PLL feedback divider(DIVN) 365 * @param m PLL input divider(DIVN) 366 * @param p post divider(DIVP) 367 * @param cpcon base PLL charge pump(CPCON) 368 * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot 369 * be overridden), 1 if PLL is already correct 370 */ 371 int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon); 372 373 /* return 1 if a peripheral ID is in range */ 374 #define clock_type_id_isvalid(id) ((id) >= 0 && \ 375 (id) < CLOCK_TYPE_COUNT) 376 377 /* return 1 if a periphc_internal_id is in range */ 378 #define periphc_internal_id_isvalid(id) ((id) >= 0 && \ 379 (id) < PERIPHC_COUNT) 380 381 /* SoC-specific TSC init */ 382 void arch_timer_init(void); 383 384 void tegra30_set_up_pllp(void); 385 386 /* Number of PLL-based clocks (i.e. not OSC, MCLK or 32KHz) */ 387 #define CLOCK_ID_PLL_COUNT (CLOCK_ID_COUNT - 3) 388 389 struct clk_pll_info { 390 u32 m_shift:5; /* DIVM_SHIFT */ 391 u32 n_shift:5; /* DIVN_SHIFT */ 392 u32 p_shift:5; /* DIVP_SHIFT */ 393 u32 kcp_shift:5; /* KCP/cpcon SHIFT */ 394 u32 kvco_shift:5; /* KVCO/lfcon SHIFT */ 395 u32 lock_ena:6; /* LOCK_ENABLE/EN_LOCKDET shift */ 396 u32 rsvd:1; 397 u32 m_mask:10; /* DIVM_MASK */ 398 u32 n_mask:12; /* DIVN_MASK */ 399 u32 p_mask:10; /* DIVP_MASK or VCO_MASK */ 400 u32 kcp_mask:10; /* KCP/CPCON MASK */ 401 u32 kvco_mask:10; /* KVCO/LFCON MASK */ 402 u32 lock_det:6; /* LOCK_DETECT/LOCKED shift */ 403 u32 rsvd2:6; 404 }; 405 extern struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT]; 406 407 struct periph_clk_init { 408 enum periph_id periph_id; 409 enum clock_id parent_clock_id; 410 }; 411 extern struct periph_clk_init periph_clk_init_table[]; 412 413 /** 414 * Enable output clock for external peripherals 415 * 416 * @param clk_id Clock ID to output (1, 2 or 3) 417 * @return 0 if OK. -ve on error 418 */ 419 int clock_external_output(int clk_id); 420 421 #endif /* _TEGRA_CLOCK_H_ */ 422
