1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright 2008-2014 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * Generic driver for Freescale DDR/DDR2/DDR3 memory controller. 8 * Based on code from spd_sdram.c 9 * Author: James Yang [at freescale.com] 10 */ 11 12 #include <common.h> 13 #include <i2c.h> 14 #include <fsl_ddr_sdram.h> 15 #include <fsl_ddr.h> 16 17 /* 18 * CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY is the physical address from the view 19 * of DDR controllers. It is the same as CONFIG_SYS_DDR_SDRAM_BASE for 20 * all Power SoCs. But it could be different for ARM SoCs. For example, 21 * fsl_lsch3 has a mapping mechanism to map DDR memory to ranges (in order) of 22 * 0x00_8000_0000 ~ 0x00_ffff_ffff 23 * 0x80_8000_0000 ~ 0xff_ffff_ffff 24 */ 25 #ifndef CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY CONFIG_SYS_DDR_SDRAM_BASE 27 #endif 28 29 #ifdef CONFIG_PPC 30 #include <asm/fsl_law.h> 31 32 void fsl_ddr_set_lawbar( 33 const common_timing_params_t *memctl_common_params, 34 unsigned int memctl_interleaved, 35 unsigned int ctrl_num); 36 #endif 37 38 void fsl_ddr_set_intl3r(const unsigned int granule_size); 39 #if defined(SPD_EEPROM_ADDRESS) || \ 40 defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ 41 defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) 42 #if (CONFIG_SYS_NUM_DDR_CTLRS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) 43 u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = { 44 [0][0] = SPD_EEPROM_ADDRESS, 45 }; 46 #elif (CONFIG_SYS_NUM_DDR_CTLRS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) 47 u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = { 48 [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ 49 [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ 50 }; 51 #elif (CONFIG_SYS_NUM_DDR_CTLRS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) 52 u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = { 53 [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ 54 [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ 55 }; 56 #elif (CONFIG_SYS_NUM_DDR_CTLRS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) 57 u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = { 58 [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ 59 [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ 60 [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */ 61 [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */ 62 }; 63 #elif (CONFIG_SYS_NUM_DDR_CTLRS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) 64 u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = { 65 [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ 66 [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ 67 [2][0] = SPD_EEPROM_ADDRESS3, /* controller 3 */ 68 }; 69 #elif (CONFIG_SYS_NUM_DDR_CTLRS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) 70 u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = { 71 [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ 72 [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ 73 [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */ 74 [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */ 75 [2][0] = SPD_EEPROM_ADDRESS5, /* controller 3 */ 76 [2][1] = SPD_EEPROM_ADDRESS6, /* controller 3 */ 77 }; 78 79 #endif 80 81 #define SPD_SPA0_ADDRESS 0x36 82 #define SPD_SPA1_ADDRESS 0x37 83 84 static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) 85 { 86 int ret; 87 #ifdef CONFIG_SYS_FSL_DDR4 88 uint8_t dummy = 0; 89 #endif 90 91 i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); 92 93 #ifdef CONFIG_SYS_FSL_DDR4 94 /* 95 * DDR4 SPD has 384 to 512 bytes 96 * To access the lower 256 bytes, we need to set EE page address to 0 97 * To access the upper 256 bytes, we need to set EE page address to 1 98 * See Jedec standar No. 21-C for detail 99 */ 100 i2c_write(SPD_SPA0_ADDRESS, 0, 1, &dummy, 1); 101 ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 256); 102 if (!ret) { 103 i2c_write(SPD_SPA1_ADDRESS, 0, 1, &dummy, 1); 104 ret = i2c_read(i2c_address, 0, 1, 105 (uchar *)((ulong)spd + 256), 106 min(256, 107 (int)sizeof(generic_spd_eeprom_t) - 256)); 108 } 109 #else 110 ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 111 sizeof(generic_spd_eeprom_t)); 112 #endif 113 114 if (ret) { 115 if (i2c_address == 116 #ifdef SPD_EEPROM_ADDRESS 117 SPD_EEPROM_ADDRESS 118 #elif defined(SPD_EEPROM_ADDRESS1) 119 SPD_EEPROM_ADDRESS1 120 #endif 121 ) { 122 printf("DDR: failed to read SPD from address %u\n", 123 i2c_address); 124 } else { 125 debug("DDR: failed to read SPD from address %u\n", 126 i2c_address); 127 } 128 memset(spd, 0, sizeof(generic_spd_eeprom_t)); 129 } 130 } 131 132 __attribute__((weak, alias("__get_spd"))) 133 void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address); 134 135 /* This function allows boards to update SPD address */ 136 __weak void update_spd_address(unsigned int ctrl_num, 137 unsigned int slot, 138 unsigned int *addr) 139 { 140 } 141 142 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, 143 unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl) 144 { 145 unsigned int i; 146 unsigned int i2c_address = 0; 147 148 if (ctrl_num >= CONFIG_SYS_NUM_DDR_CTLRS) { 149 printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); 150 return; 151 } 152 153 for (i = 0; i < dimm_slots_per_ctrl; i++) { 154 i2c_address = spd_i2c_addr[ctrl_num][i]; 155 update_spd_address(ctrl_num, i, &i2c_address); 156 get_spd(&(ctrl_dimms_spd[i]), i2c_address); 157 } 158 } 159 #else 160 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, 161 unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl) 162 { 163 } 164 #endif /* SPD_EEPROM_ADDRESSx */ 165 166 /* 167 * ASSUMPTIONS: 168 * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller 169 * - Same memory data bus width on all controllers 170 * 171 * NOTES: 172 * 173 * The memory controller and associated documentation use confusing 174 * terminology when referring to the orgranization of DRAM. 175 * 176 * Here is a terminology translation table: 177 * 178 * memory controller/documention |industry |this code |signals 179 * -------------------------------|-----------|-----------|----------------- 180 * physical bank/bank |rank |rank |chip select (CS) 181 * logical bank/sub-bank |bank |bank |bank address (BA) 182 * page/row |row |page |row address 183 * ??? |column |column |column address 184 * 185 * The naming confusion is further exacerbated by the descriptions of the 186 * memory controller interleaving feature, where accesses are interleaved 187 * _BETWEEN_ two seperate memory controllers. This is configured only in 188 * CS0_CONFIG[INTLV_CTL] of each memory controller. 189 * 190 * memory controller documentation | number of chip selects 191 * | per memory controller supported 192 * --------------------------------|----------------------------------------- 193 * cache line interleaving | 1 (CS0 only) 194 * page interleaving | 1 (CS0 only) 195 * bank interleaving | 1 (CS0 only) 196 * superbank interleraving | depends on bank (chip select) 197 * | interleraving [rank interleaving] 198 * | mode used on every memory controller 199 * 200 * Even further confusing is the existence of the interleaving feature 201 * _WITHIN_ each memory controller. The feature is referred to in 202 * documentation as chip select interleaving or bank interleaving, 203 * although it is configured in the DDR_SDRAM_CFG field. 204 * 205 * Name of field | documentation name | this code 206 * -----------------------------|-----------------------|------------------ 207 * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving 208 * | interleaving 209 */ 210 211 const char *step_string_tbl[] = { 212 "STEP_GET_SPD", 213 "STEP_COMPUTE_DIMM_PARMS", 214 "STEP_COMPUTE_COMMON_PARMS", 215 "STEP_GATHER_OPTS", 216 "STEP_ASSIGN_ADDRESSES", 217 "STEP_COMPUTE_REGS", 218 "STEP_PROGRAM_REGS", 219 "STEP_ALL" 220 }; 221 222 const char * step_to_string(unsigned int step) { 223 224 unsigned int s = __ilog2(step); 225 226 if ((1 << s) != step) 227 return step_string_tbl[7]; 228 229 if (s >= ARRAY_SIZE(step_string_tbl)) { 230 printf("Error for the step in %s\n", __func__); 231 s = 0; 232 } 233 234 return step_string_tbl[s]; 235 } 236 237 static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, 238 unsigned int dbw_cap_adj[]) 239 { 240 unsigned int i, j; 241 unsigned long long total_mem, current_mem_base, total_ctlr_mem; 242 unsigned long long rank_density, ctlr_density = 0; 243 unsigned int first_ctrl = pinfo->first_ctrl; 244 unsigned int last_ctrl = first_ctrl + pinfo->num_ctrls - 1; 245 246 /* 247 * If a reduced data width is requested, but the SPD 248 * specifies a physically wider device, adjust the 249 * computed dimm capacities accordingly before 250 * assigning addresses. 251 */ 252 for (i = first_ctrl; i <= last_ctrl; i++) { 253 unsigned int found = 0; 254 255 switch (pinfo->memctl_opts[i].data_bus_width) { 256 case 2: 257 /* 16-bit */ 258 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 259 unsigned int dw; 260 if (!pinfo->dimm_params[i][j].n_ranks) 261 continue; 262 dw = pinfo->dimm_params[i][j].primary_sdram_width; 263 if ((dw == 72 || dw == 64)) { 264 dbw_cap_adj[i] = 2; 265 break; 266 } else if ((dw == 40 || dw == 32)) { 267 dbw_cap_adj[i] = 1; 268 break; 269 } 270 } 271 break; 272 273 case 1: 274 /* 32-bit */ 275 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 276 unsigned int dw; 277 dw = pinfo->dimm_params[i][j].data_width; 278 if (pinfo->dimm_params[i][j].n_ranks 279 && (dw == 72 || dw == 64)) { 280 /* 281 * FIXME: can't really do it 282 * like this because this just 283 * further reduces the memory 284 */ 285 found = 1; 286 break; 287 } 288 } 289 if (found) { 290 dbw_cap_adj[i] = 1; 291 } 292 break; 293 294 case 0: 295 /* 64-bit */ 296 break; 297 298 default: 299 printf("unexpected data bus width " 300 "specified controller %u\n", i); 301 return 1; 302 } 303 debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]); 304 } 305 306 current_mem_base = pinfo->mem_base; 307 total_mem = 0; 308 if (pinfo->memctl_opts[first_ctrl].memctl_interleaving) { 309 rank_density = pinfo->dimm_params[first_ctrl][0].rank_density >> 310 dbw_cap_adj[first_ctrl]; 311 switch (pinfo->memctl_opts[first_ctrl].ba_intlv_ctl & 312 FSL_DDR_CS0_CS1_CS2_CS3) { 313 case FSL_DDR_CS0_CS1_CS2_CS3: 314 ctlr_density = 4 * rank_density; 315 break; 316 case FSL_DDR_CS0_CS1: 317 case FSL_DDR_CS0_CS1_AND_CS2_CS3: 318 ctlr_density = 2 * rank_density; 319 break; 320 case FSL_DDR_CS2_CS3: 321 default: 322 ctlr_density = rank_density; 323 break; 324 } 325 debug("rank density is 0x%llx, ctlr density is 0x%llx\n", 326 rank_density, ctlr_density); 327 for (i = first_ctrl; i <= last_ctrl; i++) { 328 if (pinfo->memctl_opts[i].memctl_interleaving) { 329 switch (pinfo->memctl_opts[i].memctl_interleaving_mode) { 330 case FSL_DDR_256B_INTERLEAVING: 331 case FSL_DDR_CACHE_LINE_INTERLEAVING: 332 case FSL_DDR_PAGE_INTERLEAVING: 333 case FSL_DDR_BANK_INTERLEAVING: 334 case FSL_DDR_SUPERBANK_INTERLEAVING: 335 total_ctlr_mem = 2 * ctlr_density; 336 break; 337 case FSL_DDR_3WAY_1KB_INTERLEAVING: 338 case FSL_DDR_3WAY_4KB_INTERLEAVING: 339 case FSL_DDR_3WAY_8KB_INTERLEAVING: 340 total_ctlr_mem = 3 * ctlr_density; 341 break; 342 case FSL_DDR_4WAY_1KB_INTERLEAVING: 343 case FSL_DDR_4WAY_4KB_INTERLEAVING: 344 case FSL_DDR_4WAY_8KB_INTERLEAVING: 345 total_ctlr_mem = 4 * ctlr_density; 346 break; 347 default: 348 panic("Unknown interleaving mode"); 349 } 350 pinfo->common_timing_params[i].base_address = 351 current_mem_base; 352 pinfo->common_timing_params[i].total_mem = 353 total_ctlr_mem; 354 total_mem = current_mem_base + total_ctlr_mem; 355 debug("ctrl %d base 0x%llx\n", i, current_mem_base); 356 debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); 357 } else { 358 /* when 3rd controller not interleaved */ 359 current_mem_base = total_mem; 360 total_ctlr_mem = 0; 361 pinfo->common_timing_params[i].base_address = 362 current_mem_base; 363 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 364 unsigned long long cap = 365 pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i]; 366 pinfo->dimm_params[i][j].base_address = 367 current_mem_base; 368 debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base); 369 current_mem_base += cap; 370 total_ctlr_mem += cap; 371 } 372 debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); 373 pinfo->common_timing_params[i].total_mem = 374 total_ctlr_mem; 375 total_mem += total_ctlr_mem; 376 } 377 } 378 } else { 379 /* 380 * Simple linear assignment if memory 381 * controllers are not interleaved. 382 */ 383 for (i = first_ctrl; i <= last_ctrl; i++) { 384 total_ctlr_mem = 0; 385 pinfo->common_timing_params[i].base_address = 386 current_mem_base; 387 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 388 /* Compute DIMM base addresses. */ 389 unsigned long long cap = 390 pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i]; 391 pinfo->dimm_params[i][j].base_address = 392 current_mem_base; 393 debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base); 394 current_mem_base += cap; 395 total_ctlr_mem += cap; 396 } 397 debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); 398 pinfo->common_timing_params[i].total_mem = 399 total_ctlr_mem; 400 total_mem += total_ctlr_mem; 401 } 402 } 403 debug("Total mem by %s is 0x%llx\n", __func__, total_mem); 404 405 return total_mem; 406 } 407 408 /* Use weak function to allow board file to override the address assignment */ 409 __attribute__((weak, alias("__step_assign_addresses"))) 410 unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, 411 unsigned int dbw_cap_adj[]); 412 413 unsigned long long 414 fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, 415 unsigned int size_only) 416 { 417 unsigned int i, j; 418 unsigned long long total_mem = 0; 419 int assert_reset = 0; 420 unsigned int first_ctrl = pinfo->first_ctrl; 421 unsigned int last_ctrl = first_ctrl + pinfo->num_ctrls - 1; 422 __maybe_unused int retval; 423 __maybe_unused bool goodspd = false; 424 __maybe_unused int dimm_slots_per_ctrl = pinfo->dimm_slots_per_ctrl; 425 426 fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; 427 common_timing_params_t *timing_params = pinfo->common_timing_params; 428 if (pinfo->board_need_mem_reset) 429 assert_reset = pinfo->board_need_mem_reset(); 430 431 /* data bus width capacity adjust shift amount */ 432 unsigned int dbw_capacity_adjust[CONFIG_SYS_NUM_DDR_CTLRS]; 433 434 for (i = first_ctrl; i <= last_ctrl; i++) 435 dbw_capacity_adjust[i] = 0; 436 437 debug("starting at step %u (%s)\n", 438 start_step, step_to_string(start_step)); 439 440 switch (start_step) { 441 case STEP_GET_SPD: 442 #if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM) 443 /* STEP 1: Gather all DIMM SPD data */ 444 for (i = first_ctrl; i <= last_ctrl; i++) { 445 fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i, 446 dimm_slots_per_ctrl); 447 } 448 449 case STEP_COMPUTE_DIMM_PARMS: 450 /* STEP 2: Compute DIMM parameters from SPD data */ 451 452 for (i = first_ctrl; i <= last_ctrl; i++) { 453 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 454 generic_spd_eeprom_t *spd = 455 &(pinfo->spd_installed_dimms[i][j]); 456 dimm_params_t *pdimm = 457 &(pinfo->dimm_params[i][j]); 458 retval = compute_dimm_parameters( 459 i, spd, pdimm, j); 460 #ifdef CONFIG_SYS_DDR_RAW_TIMING 461 if (!j && retval) { 462 printf("SPD error on controller %d! " 463 "Trying fallback to raw timing " 464 "calculation\n", i); 465 retval = fsl_ddr_get_dimm_params(pdimm, 466 i, j); 467 } 468 #else 469 if (retval == 2) { 470 printf("Error: compute_dimm_parameters" 471 " non-zero returned FATAL value " 472 "for memctl=%u dimm=%u\n", i, j); 473 return 0; 474 } 475 #endif 476 if (retval) { 477 debug("Warning: compute_dimm_parameters" 478 " non-zero return value for memctl=%u " 479 "dimm=%u\n", i, j); 480 } else { 481 goodspd = true; 482 } 483 } 484 } 485 if (!goodspd) { 486 /* 487 * No valid SPD found 488 * Throw an error if this is for main memory, i.e. 489 * first_ctrl == 0. Otherwise, siliently return 0 490 * as the memory size. 491 */ 492 if (first_ctrl == 0) 493 printf("Error: No valid SPD detected.\n"); 494 495 return 0; 496 } 497 #elif defined(CONFIG_SYS_DDR_RAW_TIMING) 498 case STEP_COMPUTE_DIMM_PARMS: 499 for (i = first_ctrl; i <= last_ctrl; i++) { 500 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 501 dimm_params_t *pdimm = 502 &(pinfo->dimm_params[i][j]); 503 fsl_ddr_get_dimm_params(pdimm, i, j); 504 } 505 } 506 debug("Filling dimm parameters from board specific file\n"); 507 #endif 508 case STEP_COMPUTE_COMMON_PARMS: 509 /* 510 * STEP 3: Compute a common set of timing parameters 511 * suitable for all of the DIMMs on each memory controller 512 */ 513 for (i = first_ctrl; i <= last_ctrl; i++) { 514 debug("Computing lowest common DIMM" 515 " parameters for memctl=%u\n", i); 516 compute_lowest_common_dimm_parameters 517 (i, 518 pinfo->dimm_params[i], 519 &timing_params[i], 520 CONFIG_DIMM_SLOTS_PER_CTLR); 521 } 522 523 case STEP_GATHER_OPTS: 524 /* STEP 4: Gather configuration requirements from user */ 525 for (i = first_ctrl; i <= last_ctrl; i++) { 526 debug("Reloading memory controller " 527 "configuration options for memctl=%u\n", i); 528 /* 529 * This "reloads" the memory controller options 530 * to defaults. If the user "edits" an option, 531 * next_step points to the step after this, 532 * which is currently STEP_ASSIGN_ADDRESSES. 533 */ 534 populate_memctl_options( 535 &timing_params[i], 536 &pinfo->memctl_opts[i], 537 pinfo->dimm_params[i], i); 538 /* 539 * For RDIMMs, JEDEC spec requires clocks to be stable 540 * before reset signal is deasserted. For the boards 541 * using fixed parameters, this function should be 542 * be called from board init file. 543 */ 544 if (timing_params[i].all_dimms_registered) 545 assert_reset = 1; 546 } 547 if (assert_reset && !size_only) { 548 if (pinfo->board_mem_reset) { 549 debug("Asserting mem reset\n"); 550 pinfo->board_mem_reset(); 551 } else { 552 debug("Asserting mem reset missing\n"); 553 } 554 } 555 556 case STEP_ASSIGN_ADDRESSES: 557 /* STEP 5: Assign addresses to chip selects */ 558 check_interleaving_options(pinfo); 559 total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust); 560 debug("Total mem %llu assigned\n", total_mem); 561 562 case STEP_COMPUTE_REGS: 563 /* STEP 6: compute controller register values */ 564 debug("FSL Memory ctrl register computation\n"); 565 for (i = first_ctrl; i <= last_ctrl; i++) { 566 if (timing_params[i].ndimms_present == 0) { 567 memset(&ddr_reg[i], 0, 568 sizeof(fsl_ddr_cfg_regs_t)); 569 continue; 570 } 571 572 compute_fsl_memctl_config_regs 573 (i, 574 &pinfo->memctl_opts[i], 575 &ddr_reg[i], &timing_params[i], 576 pinfo->dimm_params[i], 577 dbw_capacity_adjust[i], 578 size_only); 579 } 580 581 default: 582 break; 583 } 584 585 { 586 /* 587 * Compute the amount of memory available just by 588 * looking for the highest valid CSn_BNDS value. 589 * This allows us to also experiment with using 590 * only CS0 when using dual-rank DIMMs. 591 */ 592 unsigned int max_end = 0; 593 594 for (i = first_ctrl; i <= last_ctrl; i++) { 595 for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) { 596 fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; 597 if (reg->cs[j].config & 0x80000000) { 598 unsigned int end; 599 /* 600 * 0xfffffff is a special value we put 601 * for unused bnds 602 */ 603 if (reg->cs[j].bnds == 0xffffffff) 604 continue; 605 end = reg->cs[j].bnds & 0xffff; 606 if (end > max_end) { 607 max_end = end; 608 } 609 } 610 } 611 } 612 613 total_mem = 1 + (((unsigned long long)max_end << 24ULL) | 614 0xFFFFFFULL) - pinfo->mem_base; 615 } 616 617 return total_mem; 618 } 619 620 phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) 621 { 622 unsigned int i, first_ctrl, last_ctrl; 623 #ifdef CONFIG_PPC 624 unsigned int law_memctl = LAW_TRGT_IF_DDR_1; 625 #endif 626 unsigned long long total_memory; 627 int deassert_reset = 0; 628 629 first_ctrl = pinfo->first_ctrl; 630 last_ctrl = first_ctrl + pinfo->num_ctrls - 1; 631 632 /* Compute it once normally. */ 633 #ifdef CONFIG_FSL_DDR_INTERACTIVE 634 if (tstc() && (getc() == 'd')) { /* we got a key press of 'd' */ 635 total_memory = fsl_ddr_interactive(pinfo, 0); 636 } else if (fsl_ddr_interactive_env_var_exists()) { 637 total_memory = fsl_ddr_interactive(pinfo, 1); 638 } else 639 #endif 640 total_memory = fsl_ddr_compute(pinfo, STEP_GET_SPD, 0); 641 642 /* setup 3-way interleaving before enabling DDRC */ 643 switch (pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode) { 644 case FSL_DDR_3WAY_1KB_INTERLEAVING: 645 case FSL_DDR_3WAY_4KB_INTERLEAVING: 646 case FSL_DDR_3WAY_8KB_INTERLEAVING: 647 fsl_ddr_set_intl3r( 648 pinfo->memctl_opts[first_ctrl]. 649 memctl_interleaving_mode); 650 break; 651 default: 652 break; 653 } 654 655 /* 656 * Program configuration registers. 657 * JEDEC specs requires clocks to be stable before deasserting reset 658 * for RDIMMs. Clocks start after chip select is enabled and clock 659 * control register is set. During step 1, all controllers have their 660 * registers set but not enabled. Step 2 proceeds after deasserting 661 * reset through board FPGA or GPIO. 662 * For non-registered DIMMs, initialization can go through but it is 663 * also OK to follow the same flow. 664 */ 665 if (pinfo->board_need_mem_reset) 666 deassert_reset = pinfo->board_need_mem_reset(); 667 for (i = first_ctrl; i <= last_ctrl; i++) { 668 if (pinfo->common_timing_params[i].all_dimms_registered) 669 deassert_reset = 1; 670 } 671 for (i = first_ctrl; i <= last_ctrl; i++) { 672 debug("Programming controller %u\n", i); 673 if (pinfo->common_timing_params[i].ndimms_present == 0) { 674 debug("No dimms present on controller %u; " 675 "skipping programming\n", i); 676 continue; 677 } 678 /* 679 * The following call with step = 1 returns before enabling 680 * the controller. It has to finish with step = 2 later. 681 */ 682 fsl_ddr_set_memctl_regs(&(pinfo->fsl_ddr_config_reg[i]), i, 683 deassert_reset ? 1 : 0); 684 } 685 if (deassert_reset) { 686 /* Use board FPGA or GPIO to deassert reset signal */ 687 if (pinfo->board_mem_de_reset) { 688 debug("Deasserting mem reset\n"); 689 pinfo->board_mem_de_reset(); 690 } else { 691 debug("Deasserting mem reset missing\n"); 692 } 693 for (i = first_ctrl; i <= last_ctrl; i++) { 694 /* Call with step = 2 to continue initialization */ 695 fsl_ddr_set_memctl_regs(&(pinfo->fsl_ddr_config_reg[i]), 696 i, 2); 697 } 698 } 699 700 #ifdef CONFIG_FSL_DDR_SYNC_REFRESH 701 fsl_ddr_sync_memctl_refresh(first_ctrl, last_ctrl); 702 #endif 703 704 #ifdef CONFIG_PPC 705 /* program LAWs */ 706 for (i = first_ctrl; i <= last_ctrl; i++) { 707 if (pinfo->memctl_opts[i].memctl_interleaving) { 708 switch (pinfo->memctl_opts[i]. 709 memctl_interleaving_mode) { 710 case FSL_DDR_CACHE_LINE_INTERLEAVING: 711 case FSL_DDR_PAGE_INTERLEAVING: 712 case FSL_DDR_BANK_INTERLEAVING: 713 case FSL_DDR_SUPERBANK_INTERLEAVING: 714 if (i % 2) 715 break; 716 if (i == 0) { 717 law_memctl = LAW_TRGT_IF_DDR_INTRLV; 718 fsl_ddr_set_lawbar( 719 &pinfo->common_timing_params[i], 720 law_memctl, i); 721 } 722 #if CONFIG_SYS_NUM_DDR_CTLRS > 3 723 else if (i == 2) { 724 law_memctl = LAW_TRGT_IF_DDR_INTLV_34; 725 fsl_ddr_set_lawbar( 726 &pinfo->common_timing_params[i], 727 law_memctl, i); 728 } 729 #endif 730 break; 731 case FSL_DDR_3WAY_1KB_INTERLEAVING: 732 case FSL_DDR_3WAY_4KB_INTERLEAVING: 733 case FSL_DDR_3WAY_8KB_INTERLEAVING: 734 law_memctl = LAW_TRGT_IF_DDR_INTLV_123; 735 if (i == 0) { 736 fsl_ddr_set_lawbar( 737 &pinfo->common_timing_params[i], 738 law_memctl, i); 739 } 740 break; 741 case FSL_DDR_4WAY_1KB_INTERLEAVING: 742 case FSL_DDR_4WAY_4KB_INTERLEAVING: 743 case FSL_DDR_4WAY_8KB_INTERLEAVING: 744 law_memctl = LAW_TRGT_IF_DDR_INTLV_1234; 745 if (i == 0) 746 fsl_ddr_set_lawbar( 747 &pinfo->common_timing_params[i], 748 law_memctl, i); 749 /* place holder for future 4-way interleaving */ 750 break; 751 default: 752 break; 753 } 754 } else { 755 switch (i) { 756 case 0: 757 law_memctl = LAW_TRGT_IF_DDR_1; 758 break; 759 case 1: 760 law_memctl = LAW_TRGT_IF_DDR_2; 761 break; 762 case 2: 763 law_memctl = LAW_TRGT_IF_DDR_3; 764 break; 765 case 3: 766 law_memctl = LAW_TRGT_IF_DDR_4; 767 break; 768 default: 769 break; 770 } 771 fsl_ddr_set_lawbar(&pinfo->common_timing_params[i], 772 law_memctl, i); 773 } 774 } 775 #endif 776 777 debug("total_memory by %s = %llu\n", __func__, total_memory); 778 779 #if !defined(CONFIG_PHYS_64BIT) 780 /* Check for 4G or more. Bad. */ 781 if ((first_ctrl == 0) && (total_memory >= (1ull << 32))) { 782 puts("Detected "); 783 print_size(total_memory, " of memory\n"); 784 printf(" This U-Boot only supports < 4G of DDR\n"); 785 printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); 786 printf(" "); /* re-align to match init_dram print */ 787 total_memory = CONFIG_MAX_MEM_MAPPED; 788 } 789 #endif 790 791 return total_memory; 792 } 793 794 /* 795 * fsl_ddr_sdram(void) -- this is the main function to be 796 * called by dram_init() in the board file. 797 * 798 * It returns amount of memory configured in bytes. 799 */ 800 phys_size_t fsl_ddr_sdram(void) 801 { 802 fsl_ddr_info_t info; 803 804 /* Reset info structure. */ 805 memset(&info, 0, sizeof(fsl_ddr_info_t)); 806 info.mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY; 807 info.first_ctrl = 0; 808 info.num_ctrls = CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS; 809 info.dimm_slots_per_ctrl = CONFIG_DIMM_SLOTS_PER_CTLR; 810 info.board_need_mem_reset = board_need_mem_reset; 811 info.board_mem_reset = board_assert_mem_reset; 812 info.board_mem_de_reset = board_deassert_mem_reset; 813 remove_unused_controllers(&info); 814 815 return __fsl_ddr_sdram(&info); 816 } 817 818 #ifdef CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS 819 phys_size_t fsl_other_ddr_sdram(unsigned long long base, 820 unsigned int first_ctrl, 821 unsigned int num_ctrls, 822 unsigned int dimm_slots_per_ctrl, 823 int (*board_need_reset)(void), 824 void (*board_reset)(void), 825 void (*board_de_reset)(void)) 826 { 827 fsl_ddr_info_t info; 828 829 /* Reset info structure. */ 830 memset(&info, 0, sizeof(fsl_ddr_info_t)); 831 info.mem_base = base; 832 info.first_ctrl = first_ctrl; 833 info.num_ctrls = num_ctrls; 834 info.dimm_slots_per_ctrl = dimm_slots_per_ctrl; 835 info.board_need_mem_reset = board_need_reset; 836 info.board_mem_reset = board_reset; 837 info.board_mem_de_reset = board_de_reset; 838 839 return __fsl_ddr_sdram(&info); 840 } 841 #endif 842 843 /* 844 * fsl_ddr_sdram_size(first_ctrl, last_intlv) - This function only returns the 845 * size of the total memory without setting ddr control registers. 846 */ 847 phys_size_t 848 fsl_ddr_sdram_size(void) 849 { 850 fsl_ddr_info_t info; 851 unsigned long long total_memory = 0; 852 853 memset(&info, 0 , sizeof(fsl_ddr_info_t)); 854 info.mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY; 855 info.first_ctrl = 0; 856 info.num_ctrls = CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS; 857 info.dimm_slots_per_ctrl = CONFIG_DIMM_SLOTS_PER_CTLR; 858 info.board_need_mem_reset = NULL; 859 remove_unused_controllers(&info); 860 861 /* Compute it once normally. */ 862 total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1); 863 864 return total_memory; 865 } 866
