1 // SPDX-License-Identifier: GPL-2.0+ 2 /** 3 * Copyright 2011 Freescale Semiconductor 4 * Author: Mingkai Hu <Mingkai.hu (at) freescale.com> 5 * 6 * This file provides support for the board-specific CPLD used on some Freescale 7 * reference boards. 8 * 9 * The following macros need to be defined: 10 * 11 * CPLD_BASE - The virtual address of the base of the CPLD register map 12 */ 13 14 #include <common.h> 15 #include <command.h> 16 #include <asm/io.h> 17 18 #include "cpld.h" 19 20 static u8 __cpld_read(unsigned int reg) 21 { 22 void *p = (void *)CPLD_BASE; 23 24 return in_8(p + reg); 25 } 26 u8 cpld_read(unsigned int reg) __attribute__((weak, alias("__cpld_read"))); 27 28 static void __cpld_write(unsigned int reg, u8 value) 29 { 30 void *p = (void *)CPLD_BASE; 31 32 out_8(p + reg, value); 33 } 34 void cpld_write(unsigned int reg, u8 value) 35 __attribute__((weak, alias("__cpld_write"))); 36 37 /* 38 * Reset the board. This honors the por_cfg registers. 39 */ 40 void __cpld_reset(void) 41 { 42 CPLD_WRITE(system_rst, 1); 43 } 44 void cpld_reset(void) __attribute__((weak, alias("__cpld_reset"))); 45 46 /** 47 * Set the boot bank to the alternate bank 48 */ 49 void __cpld_set_altbank(void) 50 { 51 u8 reg5 = CPLD_READ(sw_ctl_on); 52 53 CPLD_WRITE(sw_ctl_on, reg5 | CPLD_SWITCH_BANK_ENABLE); 54 CPLD_WRITE(fbank_sel, 1); 55 CPLD_WRITE(system_rst, 1); 56 } 57 void cpld_set_altbank(void) 58 __attribute__((weak, alias("__cpld_set_altbank"))); 59 60 /** 61 * Set the boot bank to the default bank 62 */ 63 void __cpld_set_defbank(void) 64 { 65 CPLD_WRITE(system_rst_default, 1); 66 } 67 void cpld_set_defbank(void) 68 __attribute__((weak, alias("__cpld_set_defbank"))); 69 70 #ifdef DEBUG 71 static void cpld_dump_regs(void) 72 { 73 printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver)); 74 printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub)); 75 printf("pcba_ver = 0x%02x\n", CPLD_READ(pcba_ver)); 76 printf("system_rst = 0x%02x\n", CPLD_READ(system_rst)); 77 printf("sw_ctl_on = 0x%02x\n", CPLD_READ(sw_ctl_on)); 78 printf("por_cfg = 0x%02x\n", CPLD_READ(por_cfg)); 79 printf("switch_strobe = 0x%02x\n", CPLD_READ(switch_strobe)); 80 printf("jtag_sel = 0x%02x\n", CPLD_READ(jtag_sel)); 81 printf("sdbank1_clk = 0x%02x\n", CPLD_READ(sdbank1_clk)); 82 printf("sdbank2_clk = 0x%02x\n", CPLD_READ(sdbank2_clk)); 83 printf("fbank_sel = 0x%02x\n", CPLD_READ(fbank_sel)); 84 printf("serdes_mux = 0x%02x\n", CPLD_READ(serdes_mux)); 85 printf("SW[2] = 0x%02x\n", in_8(&CPLD_SW(2))); 86 putc('\n'); 87 } 88 #endif 89 90 int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 91 { 92 int rc = 0; 93 94 if (argc <= 1) 95 return cmd_usage(cmdtp); 96 97 if (strcmp(argv[1], "reset") == 0) { 98 if (strcmp(argv[2], "altbank") == 0) 99 cpld_set_altbank(); 100 else 101 cpld_set_defbank(); 102 } else if (strcmp(argv[1], "lane_mux") == 0) { 103 u32 lane = simple_strtoul(argv[2], NULL, 16); 104 u8 val = (u8)simple_strtoul(argv[3], NULL, 16); 105 u8 reg = CPLD_READ(serdes_mux); 106 107 switch (lane) { 108 case 0x6: 109 reg &= ~SERDES_MUX_LANE_6_MASK; 110 reg |= val << SERDES_MUX_LANE_6_SHIFT; 111 break; 112 case 0xa: 113 reg &= ~SERDES_MUX_LANE_A_MASK; 114 reg |= val << SERDES_MUX_LANE_A_SHIFT; 115 break; 116 case 0xc: 117 reg &= ~SERDES_MUX_LANE_C_MASK; 118 reg |= val << SERDES_MUX_LANE_C_SHIFT; 119 break; 120 case 0xd: 121 reg &= ~SERDES_MUX_LANE_D_MASK; 122 reg |= val << SERDES_MUX_LANE_D_SHIFT; 123 break; 124 default: 125 printf("Invalid value\n"); 126 break; 127 } 128 129 CPLD_WRITE(serdes_mux, reg); 130 #ifdef DEBUG 131 } else if (strcmp(argv[1], "dump") == 0) { 132 cpld_dump_regs(); 133 #endif 134 } else 135 rc = cmd_usage(cmdtp); 136 137 return rc; 138 } 139 140 U_BOOT_CMD( 141 cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, 142 "Reset the board or pin mulexing selection using the CPLD sequencer", 143 "reset - hard reset to default bank\n" 144 "cpld_cmd reset altbank - reset to alternate bank\n" 145 "cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n" 146 " lane 6: 0 -> slot1\n" 147 " 1 -> SGMII (Default)\n" 148 " lane a: 0 -> slot2\n" 149 " 1 -> AURORA (Default)\n" 150 " lane c: 0 -> slot2\n" 151 " 1 -> SATA0 (Default)\n" 152 " lane d: 0 -> slot2\n" 153 " 1 -> SATA1 (Default)\n" 154 #ifdef DEBUG 155 "cpld_cmd dump - display the CPLD registers\n" 156 #endif 157 ); 158
